[PATCH] net/iavf: fix abnormal disable HW interrupt

[Mingjin Ye <mingjinx.ye@intel.com>]

For command VIRTCHNL_OP_REQUEST_QUEUES, polling access to the admin
queue has the issue of access overruns after disabling interrupt. That
results in FW disabling HW interrupt for protection purposes.

The updates/changes in this patch:
1. Remove the polling admin queue processing and use the generic interrupt
processing instead.
2. Release redundant queue resource before stopping processing interrupt
events.

Fixes: 22b123a36d07 ("net/avf: initialize PMD")
Fixes: ef807926e148 ("net/iavf: support requesting additional queues from PF")
Fixes: 84108425054a ("net/iavf: support asynchronous virtual channel message")
Cc: stable@dpdk.org

Signed-off-by: Mingjin Ye <mingjinx.ye@intel.com>
---
 drivers/net/iavf/iavf_ethdev.c | 25 +++++++++---------
 drivers/net/iavf/iavf_vchnl.c  | 48 +++++++---------------------------
 2 files changed, 23 insertions(+), 50 deletions(-)

diff --git a/drivers/net/iavf/iavf_ethdev.c b/drivers/net/iavf/iavf_ethdev.c
index e6cf897293..ba5c88a1ec 100644
--- a/drivers/net/iavf/iavf_ethdev.c
+++ b/drivers/net/iavf/iavf_ethdev.c
@@ -2756,6 +2756,19 @@ iavf_dev_close(struct rte_eth_dev *dev)
 	}
 
 	ret = iavf_dev_stop(dev);
+
+	/*
+	 * Release redundant queue resource when close the dev
+	 * so that other vfs can re-use the queues.
+	 */
+	if (vf->lv_enabled) {
+		ret = iavf_request_queues(dev, IAVF_MAX_NUM_QUEUES_DFLT);
+		if (ret)
+			PMD_DRV_LOG(ERR, "Reset the num of queues failed");
+
+		vf->max_rss_qregion = IAVF_MAX_NUM_QUEUES_DFLT;
+	}
+
 	adapter->closed = true;
 
 	/* free iAVF security device context all related resources */
@@ -2772,18 +2785,6 @@ iavf_dev_close(struct rte_eth_dev *dev)
 	if (vf->promisc_unicast_enabled || vf->promisc_multicast_enabled)
 		iavf_config_promisc(adapter, false, false);
 
-	/*
-	 * Release redundant queue resource when close the dev
-	 * so that other vfs can re-use the queues.
-	 */
-	if (vf->lv_enabled) {
-		ret = iavf_request_queues(dev, IAVF_MAX_NUM_QUEUES_DFLT);
-		if (ret)
-			PMD_DRV_LOG(ERR, "Reset the num of queues failed");
-
-		vf->max_rss_qregion = IAVF_MAX_NUM_QUEUES_DFLT;
-	}
-
 	iavf_shutdown_adminq(hw);
 	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_WB_ON_ITR) {
 		/* disable uio intr before callback unregister */
diff --git a/drivers/net/iavf/iavf_vchnl.c b/drivers/net/iavf/iavf_vchnl.c
index 8cc5377bcf..579c0d0d70 100644
--- a/drivers/net/iavf/iavf_vchnl.c
+++ b/drivers/net/iavf/iavf_vchnl.c
@@ -323,6 +323,7 @@ iavf_execute_vf_cmd(struct iavf_adapter *adapter, struct iavf_cmd_info *args,
 
 	switch (args->ops) {
 	case VIRTCHNL_OP_RESET_VF:
+	case VIRTCHNL_OP_REQUEST_QUEUES:
 		/*no need to wait for response */
 		_clear_cmd(vf);
 		break;
@@ -346,33 +347,6 @@ iavf_execute_vf_cmd(struct iavf_adapter *adapter, struct iavf_cmd_info *args,
 		}
 		_clear_cmd(vf);
 		break;
-	case VIRTCHNL_OP_REQUEST_QUEUES:
-		/*
-		 * ignore async reply, only wait for system message,
-		 * vf_reset = true if get VIRTCHNL_EVENT_RESET_IMPENDING,
-		 * if not, means request queues failed.
-		 */
-		do {
-			result = iavf_read_msg_from_pf(adapter, args->out_size,
-						   args->out_buffer);
-			if (result == IAVF_MSG_SYS && vf->vf_reset) {
-				break;
-			} else if (result == IAVF_MSG_CMD ||
-				result == IAVF_MSG_ERR) {
-				err = -1;
-				break;
-			}
-			iavf_msec_delay(ASQ_DELAY_MS);
-			/* If don't read msg or read sys event, continue */
-		} while (i++ < MAX_TRY_TIMES);
-		if (i >= MAX_TRY_TIMES ||
-			vf->cmd_retval != VIRTCHNL_STATUS_SUCCESS) {
-			err = -1;
-			PMD_DRV_LOG(ERR, "No response or return failure (%d)"
-				    " for cmd %d", vf->cmd_retval, args->ops);
-		}
-		_clear_cmd(vf);
-		break;
 	default:
 		/* For other virtchnl ops in running time,
 		 * wait for the cmd done flag.
@@ -2055,11 +2029,11 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t num)
 	struct iavf_adapter *adapter =
 		IAVF_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
 	struct iavf_info *vf =  IAVF_DEV_PRIVATE_TO_VF(adapter);
-	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
 	struct virtchnl_vf_res_request vfres;
 	struct iavf_cmd_info args;
 	uint16_t num_queue_pairs;
 	int err;
+	int i = 0;
 
 	if (!(vf->vf_res->vf_cap_flags &
 		VIRTCHNL_VF_OFFLOAD_REQ_QUEUES)) {
@@ -2080,16 +2054,7 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t num)
 	args.out_size = IAVF_AQ_BUF_SZ;
 
 	if (vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_WB_ON_ITR) {
-		/* disable interrupt to avoid the admin queue message to be read
-		 * before iavf_read_msg_from_pf.
-		 *
-		 * don't disable interrupt handler until ready to execute vf cmd.
-		 */
-		rte_spinlock_lock(&vf->aq_lock);
-		rte_intr_disable(pci_dev->intr_handle);
-		err = iavf_execute_vf_cmd(adapter, &args, 0);
-		rte_intr_enable(pci_dev->intr_handle);
-		rte_spinlock_unlock(&vf->aq_lock);
+		err = iavf_execute_vf_cmd_safe(adapter, &args, 0);
 	} else {
 		rte_eal_alarm_cancel(iavf_dev_alarm_handler, dev);
 		err = iavf_execute_vf_cmd_safe(adapter, &args, 0);
@@ -2102,6 +2067,13 @@ iavf_request_queues(struct rte_eth_dev *dev, uint16_t num)
 		return err;
 	}
 
+	/* wait for interrupt notification vf is resetting */
+	while (i++ < MAX_TRY_TIMES) {
+		if (vf->vf_reset)
+			break;
+		iavf_msec_delay(ASQ_DELAY_MS);
+	}
+
 	/* request queues succeeded, vf is resetting */
 	if (vf->vf_reset) {
 		PMD_DRV_LOG(INFO, "vf is resetting");
-- 
2.25.1