DPDK patches and discussions
 help / color / mirror / Atom feed
From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org
Cc: Aman Singh <aman.deep.singh@intel.com>,
	Yuying Zhang <yuying.zhang@intel.com>,
	Ferruh Yigit <ferruh.yigit@amd.com>,
	Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
	Dengdui Huang <huangdengdui@huawei.com>
Subject: [PATCH] ethdev: rename functions checking queue validity
Date: Wed, 14 Jun 2023 17:20:59 +0200	[thread overview]
Message-ID: <20230614152100.1664198-1-thomas@monjalon.net> (raw)

Two functions helping to check Rx/Tx queues validity
were added in DPDK 23.07-rc1.
As the release is not closed, it is still time to rename.

The name proposed originally
	rte_eth_dev_is_valid_*xq
is consistent with this function:
	rte_eth_dev_is_valid_port()
However, the suffixes "rxq" and "txq" are uncommon in ethdev functions.

Also for shortness, many functions are dropping "_dev_"
as these functions which manage the queues:
	rte_eth_*x_queue_info_get()
	rte_eth_*x_queue_setup()
	rte_eth_*x_hairpin_queue_setup
For completeness, there are some old functions having "_dev_":
	rte_eth_dev_*x_queue_start()
	rte_eth_dev_*x_queue_stop()
Anyway in all above examples, the subject is after the prefix,
and the verb is at the end.

That's why I propose renaming into:
	rte_eth_*x_queue_is_valid()

Fixes: 7ea7e0cd3a08 ("ethdev: add functions to check queue validity")

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
 app/test-pmd/cmdline.c  | 6 +++---
 lib/ethdev/rte_ethdev.c | 4 ++--
 lib/ethdev/rte_ethdev.h | 4 ++--
 lib/ethdev/version.map  | 4 ++--
 4 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a15a442a06..5da38b0bb4 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -12283,7 +12283,7 @@ cmd_show_rx_tx_desc_status_parsed(void *parsed_result,
 	int rc;
 
 	if (!strcmp(res->cmd_keyword, "rxq")) {
-		if (rte_eth_dev_is_valid_rxq(res->cmd_pid, res->cmd_qid) != 0) {
+		if (rte_eth_rx_queue_is_valid(res->cmd_pid, res->cmd_qid) != 0) {
 			fprintf(stderr,
 				"Invalid input: port id = %d, queue id = %d\n",
 				res->cmd_pid, res->cmd_qid);
@@ -12304,7 +12304,7 @@ cmd_show_rx_tx_desc_status_parsed(void *parsed_result,
 		else
 			printf("Desc status = UNAVAILABLE\n");
 	} else if (!strcmp(res->cmd_keyword, "txq")) {
-		if (rte_eth_dev_is_valid_txq(res->cmd_pid, res->cmd_qid) != 0) {
+		if (rte_eth_tx_queue_is_valid(res->cmd_pid, res->cmd_qid) != 0) {
 			fprintf(stderr,
 				"Invalid input: port id = %d, queue id = %d\n",
 				res->cmd_pid, res->cmd_qid);
@@ -12389,7 +12389,7 @@ cmd_show_rx_queue_desc_used_count_parsed(void *parsed_result,
 	struct cmd_show_rx_queue_desc_used_count_result *res = parsed_result;
 	int rc;
 
-	if (rte_eth_dev_is_valid_rxq(res->cmd_pid, res->cmd_qid) != 0) {
+	if (rte_eth_rx_queue_is_valid(res->cmd_pid, res->cmd_qid) != 0) {
 		fprintf(stderr,
 			"Invalid input: port id = %d, queue id = %d\n",
 			res->cmd_pid, res->cmd_qid);
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index 7317015895..843087e615 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -771,7 +771,7 @@ eth_dev_validate_tx_queue(const struct rte_eth_dev *dev, uint16_t tx_queue_id)
 }
 
 int
-rte_eth_dev_is_valid_rxq(uint16_t port_id, uint16_t queue_id)
+rte_eth_rx_queue_is_valid(uint16_t port_id, uint16_t queue_id)
 {
 	struct rte_eth_dev *dev;
 
@@ -782,7 +782,7 @@ rte_eth_dev_is_valid_rxq(uint16_t port_id, uint16_t queue_id)
 }
 
 int
-rte_eth_dev_is_valid_txq(uint16_t port_id, uint16_t queue_id)
+rte_eth_tx_queue_is_valid(uint16_t port_id, uint16_t queue_id)
 {
 	struct rte_eth_dev *dev;
 
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 34ca25bbc0..9466b21dd3 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -2683,7 +2683,7 @@ int rte_eth_dev_is_valid_port(uint16_t port_id);
  *   - 0 if Rx queue is valid.
  */
 __rte_experimental
-int rte_eth_dev_is_valid_rxq(uint16_t port_id, uint16_t queue_id);
+int rte_eth_rx_queue_is_valid(uint16_t port_id, uint16_t queue_id);
 
 /**
  * @warning
@@ -2702,7 +2702,7 @@ int rte_eth_dev_is_valid_rxq(uint16_t port_id, uint16_t queue_id);
  *   - 0 if Tx queue is valid.
  */
 __rte_experimental
-int rte_eth_dev_is_valid_txq(uint16_t port_id, uint16_t queue_id);
+int rte_eth_tx_queue_is_valid(uint16_t port_id, uint16_t queue_id);
 
 /**
  * Start specified Rx queue of a port. It is used when rx_deferred_start
diff --git a/lib/ethdev/version.map b/lib/ethdev/version.map
index 1a33d72668..69c9f09a82 100644
--- a/lib/ethdev/version.map
+++ b/lib/ethdev/version.map
@@ -301,8 +301,8 @@ EXPERIMENTAL {
 	rte_flow_async_create_by_index;
 
 	# added in 23.07
-	rte_eth_dev_is_valid_rxq;
-	rte_eth_dev_is_valid_txq;
+	rte_eth_rx_queue_is_valid;
+	rte_eth_tx_queue_is_valid;
 	rte_flow_action_list_handle_create;
 	rte_flow_action_list_handle_destroy;
 	rte_flow_action_list_handle_query_update;
-- 
2.40.1


             reply	other threads:[~2023-06-14 15:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-14 15:20 Thomas Monjalon [this message]
2023-06-14 15:39 ` Ferruh Yigit
2023-06-14 16:44 ` Stephen Hemminger
2023-06-19  9:41   ` Andrew Rybchenko
2023-06-20 15:59     ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230614152100.1664198-1-thomas@monjalon.net \
    --to=thomas@monjalon.net \
    --cc=aman.deep.singh@intel.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@amd.com \
    --cc=huangdengdui@huawei.com \
    --cc=yuying.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).