* [PATCH v5 0/2] Add DTS smoke tests @ 2023-07-12 19:17 jspewock 2023-07-12 19:18 ` [PATCH v5 1/2] dts: add " jspewock 2023-07-12 19:18 ` [PATCH v5 2/2] dts: add paramiko to dependencies jspewock 0 siblings, 2 replies; 5+ messages in thread From: jspewock @ 2023-07-12 19:17 UTC (permalink / raw) To: Honnappa.Nagarahalli, juraj.linkes, thomas, lijuan.tu, wathsala.vithanage, probb Cc: dev, Jeremy Spewock From: Jeremy Spewock <jspewock@iol.unh.edu> The previous version of this patch removed a method in the InteractiveShell class but after reading the comments over again and looking at the code, there was another method that now becomes unused and not needed. This method for emptying the stdout buffer is removed in this patch. RFCs for this patch: * v3: https://mails.dpdk.org/archives/dev/2023-June/269859.html * v2: https://mails.dpdk.org/archives/dev/2023-May/267915.html * v1: https://mails.dpdk.org/archives/dev/2023-April/266580.html Previous patch: * v1: https://mails.dpdk.org/archives/dev/2023-June/271309.html * v2: https://mails.dpdk.org/archives/dev/2023-July/272833.html * v3: https://mails.dpdk.org/archives/dev/2023-July/272930.html * v4: https://mails.dpdk.org/archives/dev/2023-July/272964.html Jeremy Spewock (2): dts: add smoke tests dts: add paramiko to dependencies dts/conf.yaml | 17 +- dts/framework/config/__init__.py | 105 +++++++++-- dts/framework/config/conf_yaml_schema.json | 142 +++++++++++++- dts/framework/dts.py | 87 ++++++--- dts/framework/exception.py | 12 ++ dts/framework/remote_session/__init__.py | 11 +- dts/framework/remote_session/os_session.py | 53 +++++- dts/framework/remote_session/posix_session.py | 29 ++- .../remote_session/remote/__init__.py | 10 + .../remote/interactive_remote_session.py | 82 ++++++++ .../remote/interactive_shell.py | 75 ++++++++ .../remote_session/remote/testpmd_shell.py | 75 ++++++++ dts/framework/test_result.py | 37 +++- dts/framework/test_suite.py | 10 +- dts/framework/testbed_model/node.py | 2 + dts/framework/testbed_model/sut_node.py | 176 +++++++++++++----- dts/framework/utils.py | 2 + dts/poetry.lock | 160 ++++++++++++---- dts/pyproject.toml | 1 + dts/tests/TestSuite_smoke_tests.py | 113 +++++++++++ 20 files changed, 1065 insertions(+), 134 deletions(-) create mode 100644 dts/framework/remote_session/remote/interactive_remote_session.py create mode 100644 dts/framework/remote_session/remote/interactive_shell.py create mode 100644 dts/framework/remote_session/remote/testpmd_shell.py create mode 100644 dts/tests/TestSuite_smoke_tests.py -- 2.41.0 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v5 1/2] dts: add smoke tests 2023-07-12 19:17 [PATCH v5 0/2] Add DTS smoke tests jspewock @ 2023-07-12 19:18 ` jspewock 2023-07-12 20:00 ` Jeremy Spewock 2023-07-12 19:18 ` [PATCH v5 2/2] dts: add paramiko to dependencies jspewock 1 sibling, 1 reply; 5+ messages in thread From: jspewock @ 2023-07-12 19:18 UTC (permalink / raw) To: Honnappa.Nagarahalli, juraj.linkes, thomas, lijuan.tu, wathsala.vithanage, probb Cc: dev, Jeremy Spewock From: Jeremy Spewock <jspewock@iol.unh.edu> Adds a new test suite for running smoke tests that verify general configuration aspects of the system under test. If any of these tests fail, the DTS execution terminates as part of a "fail-fast" model. Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu> --- dts/conf.yaml | 17 +- dts/framework/config/__init__.py | 105 +++++++++-- dts/framework/config/conf_yaml_schema.json | 142 +++++++++++++- dts/framework/dts.py | 87 ++++++--- dts/framework/exception.py | 12 ++ dts/framework/remote_session/__init__.py | 11 +- dts/framework/remote_session/os_session.py | 53 +++++- dts/framework/remote_session/posix_session.py | 29 ++- .../remote_session/remote/__init__.py | 10 + .../remote/interactive_remote_session.py | 82 ++++++++ .../remote/interactive_shell.py | 75 ++++++++ .../remote_session/remote/testpmd_shell.py | 75 ++++++++ dts/framework/test_result.py | 37 +++- dts/framework/test_suite.py | 10 +- dts/framework/testbed_model/node.py | 2 + dts/framework/testbed_model/sut_node.py | 176 +++++++++++++----- dts/framework/utils.py | 2 + dts/tests/TestSuite_smoke_tests.py | 113 +++++++++++ 18 files changed, 941 insertions(+), 97 deletions(-) create mode 100644 dts/framework/remote_session/remote/interactive_remote_session.py create mode 100644 dts/framework/remote_session/remote/interactive_shell.py create mode 100644 dts/framework/remote_session/remote/testpmd_shell.py create mode 100644 dts/tests/TestSuite_smoke_tests.py diff --git a/dts/conf.yaml b/dts/conf.yaml index a9bd8a3e..c0be7848 100644 --- a/dts/conf.yaml +++ b/dts/conf.yaml @@ -10,9 +10,13 @@ executions: compiler_wrapper: ccache perf: false func: true + skip_smoke_tests: false # optional flag that allow you to skip smoke tests test_suites: - hello_world - system_under_test: "SUT 1" + system_under_test: + node_name: "SUT 1" + vdevs: # optional; if removed, vdevs won't be used in the execution + - "crypto_openssl" nodes: - name: "SUT 1" hostname: sut1.change.me.localhost @@ -25,3 +29,14 @@ nodes: hugepages: # optional; if removed, will use system hugepage configuration amount: 256 force_first_numa: false + ports: + - pci: "0000:00:08.0" + os_driver_for_dpdk: vfio-pci # OS driver that DPDK will use + os_driver: i40e + peer_node: "TG 1" + peer_pci: "0000:00:08.0" + - pci: "0000:00:08.1" + os_driver_for_dpdk: vfio-pci + os_driver: i40e + peer_node: "TG 1" + peer_pci: "0000:00:08.1" diff --git a/dts/framework/config/__init__.py b/dts/framework/config/__init__.py index ebb0823f..9e144748 100644 --- a/dts/framework/config/__init__.py +++ b/dts/framework/config/__init__.py @@ -12,6 +12,7 @@ import pathlib from dataclasses import dataclass from enum import Enum, auto, unique +from pathlib import PurePath from typing import Any, TypedDict import warlock # type: ignore @@ -72,6 +73,20 @@ class HugepageConfiguration: force_first_numa: bool +@dataclass(slots=True, frozen=True) +class PortConfig: + node: str + pci: str + os_driver_for_dpdk: str + os_driver: str + peer_node: str + peer_pci: str + + @staticmethod + def from_dict(node: str, d: dict) -> "PortConfig": + return PortConfig(node=node, **d) + + @dataclass(slots=True, frozen=True) class NodeConfiguration: name: str @@ -84,6 +99,7 @@ class NodeConfiguration: use_first_core: bool memory_channels: int hugepages: HugepageConfiguration | None + ports: list[PortConfig] @staticmethod def from_dict(d: dict) -> "NodeConfiguration": @@ -92,19 +108,36 @@ def from_dict(d: dict) -> "NodeConfiguration": if "force_first_numa" not in hugepage_config: hugepage_config["force_first_numa"] = False hugepage_config = HugepageConfiguration(**hugepage_config) + common_config = { + "name": d["name"], + "hostname": d["hostname"], + "user": d["user"], + "password": d.get("password"), + "arch": Architecture(d["arch"]), + "os": OS(d["os"]), + "lcores": d.get("lcores", "1"), + "use_first_core": d.get("use_first_core", False), + "memory_channels": d.get("memory_channels", 1), + "hugepages": hugepage_config, + "ports": [PortConfig.from_dict(d["name"], port) for port in d["ports"]], + } + + return NodeConfiguration(**common_config) - return NodeConfiguration( - name=d["name"], - hostname=d["hostname"], - user=d["user"], - password=d.get("password"), - arch=Architecture(d["arch"]), - os=OS(d["os"]), - lcores=d.get("lcores", "1"), - use_first_core=d.get("use_first_core", False), - memory_channels=d.get("memory_channels", 1), - hugepages=hugepage_config, - ) + +@dataclass(slots=True, frozen=True) +class NodeInfo: + """Class to hold important versions within the node. + + This class, unlike the NodeConfiguration class, cannot be generated at the start. + This is because we need to initialize a connection with the node before we can + collect the information needed in this class. Therefore, it cannot be a part of + the configuration class above. + """ + + os_name: str + os_version: str + kernel_version: str @dataclass(slots=True, frozen=True) @@ -128,6 +161,18 @@ def from_dict(d: dict) -> "BuildTargetConfiguration": ) +@dataclass(slots=True, frozen=True) +class BuildTargetInfo: + """Class to hold important versions within the build target. + + This is very similar to the NodeInfo class, it just instead holds information + for the build target. + """ + + dpdk_version: str + compiler_version: str + + class TestSuiteConfigDict(TypedDict): suite: str cases: list[str] @@ -157,6 +202,8 @@ class ExecutionConfiguration: func: bool test_suites: list[TestSuiteConfig] system_under_test: NodeConfiguration + vdevs: list[str] + skip_smoke_tests: bool @staticmethod def from_dict(d: dict, node_map: dict) -> "ExecutionConfiguration": @@ -166,15 +213,20 @@ def from_dict(d: dict, node_map: dict) -> "ExecutionConfiguration": test_suites: list[TestSuiteConfig] = list( map(TestSuiteConfig.from_dict, d["test_suites"]) ) - sut_name = d["system_under_test"] + sut_name = d["system_under_test"]["node_name"] + skip_smoke_tests = d.get("skip_smoke_tests", False) assert sut_name in node_map, f"Unknown SUT {sut_name} in execution {d}" - + vdevs = ( + d["system_under_test"]["vdevs"] if "vdevs" in d["system_under_test"] else [] + ) return ExecutionConfiguration( build_targets=build_targets, perf=d["perf"], func=d["func"], + skip_smoke_tests=skip_smoke_tests, test_suites=test_suites, system_under_test=node_map[sut_name], + vdevs=vdevs, ) @@ -221,3 +273,28 @@ def load_config() -> Configuration: CONFIGURATION = load_config() + + +@unique +class InteractiveApp(Enum): + """An enum that represents different supported interactive applications. + + The values in this enum must all be set to objects that have a key called + "default_path" where "default_path" represents a PurePath object for the path + to the application. This default path will be passed into the handler class + for the application so that it can start the application. + """ + + testpmd = {"default_path": PurePath("app", "dpdk-testpmd")} + + @property + def path(self) -> PurePath: + """Default path of the application. + + For DPDK apps, this will be appended to the DPDK build directory. + """ + return self.value["default_path"] + + @path.setter + def path(self, path: PurePath) -> None: + self.value["default_path"] = path diff --git a/dts/framework/config/conf_yaml_schema.json b/dts/framework/config/conf_yaml_schema.json index ca2d4a1e..61f52b43 100644 --- a/dts/framework/config/conf_yaml_schema.json +++ b/dts/framework/config/conf_yaml_schema.json @@ -6,6 +6,76 @@ "type": "string", "description": "A unique identifier for a node" }, + "NIC": { + "type": "string", + "enum": [ + "ALL", + "ConnectX3_MT4103", + "ConnectX4_LX_MT4117", + "ConnectX4_MT4115", + "ConnectX5_MT4119", + "ConnectX5_MT4121", + "I40E_10G-10G_BASE_T_BC", + "I40E_10G-10G_BASE_T_X722", + "I40E_10G-SFP_X722", + "I40E_10G-SFP_XL710", + "I40E_10G-X722_A0", + "I40E_1G-1G_BASE_T_X722", + "I40E_25G-25G_SFP28", + "I40E_40G-QSFP_A", + "I40E_40G-QSFP_B", + "IAVF-ADAPTIVE_VF", + "IAVF-VF", + "IAVF_10G-X722_VF", + "ICE_100G-E810C_QSFP", + "ICE_25G-E810C_SFP", + "ICE_25G-E810_XXV_SFP", + "IGB-I350_VF", + "IGB_1G-82540EM", + "IGB_1G-82545EM_COPPER", + "IGB_1G-82571EB_COPPER", + "IGB_1G-82574L", + "IGB_1G-82576", + "IGB_1G-82576_QUAD_COPPER", + "IGB_1G-82576_QUAD_COPPER_ET2", + "IGB_1G-82580_COPPER", + "IGB_1G-I210_COPPER", + "IGB_1G-I350_COPPER", + "IGB_1G-I354_SGMII", + "IGB_1G-PCH_LPTLP_I218_LM", + "IGB_1G-PCH_LPTLP_I218_V", + "IGB_1G-PCH_LPT_I217_LM", + "IGB_1G-PCH_LPT_I217_V", + "IGB_2.5G-I354_BACKPLANE_2_5GBPS", + "IGC-I225_LM", + "IGC-I226_LM", + "IXGBE_10G-82599_SFP", + "IXGBE_10G-82599_SFP_SF_QP", + "IXGBE_10G-82599_T3_LOM", + "IXGBE_10G-82599_VF", + "IXGBE_10G-X540T", + "IXGBE_10G-X540_VF", + "IXGBE_10G-X550EM_A_SFP", + "IXGBE_10G-X550EM_X_10G_T", + "IXGBE_10G-X550EM_X_SFP", + "IXGBE_10G-X550EM_X_VF", + "IXGBE_10G-X550T", + "IXGBE_10G-X550_VF", + "brcm_57414", + "brcm_P2100G", + "cavium_0011", + "cavium_a034", + "cavium_a063", + "cavium_a064", + "fastlinq_ql41000", + "fastlinq_ql41000_vf", + "fastlinq_ql45000", + "fastlinq_ql45000_vf", + "hi1822", + "virtio" + ] + }, + "ARCH": { "type": "string", "enum": [ @@ -94,6 +164,19 @@ "amount" ] }, + "pci_address": { + "type": "string", + "pattern": "^[\\da-fA-F]{4}:[\\da-fA-F]{2}:[\\da-fA-F]{2}.\\d:?\\w*$" + }, + "port_peer_address": { + "description": "Peer is a TRex port, and IXIA port or a PCI address", + "oneOf": [ + { + "description": "PCI peer port", + "$ref": "#/definitions/pci_address" + } + ] + }, "test_suite": { "type": "string", "enum": [ @@ -165,6 +248,44 @@ }, "hugepages": { "$ref": "#/definitions/hugepages" + }, + "ports": { + "type": "array", + "items": { + "type": "object", + "description": "Each port should be described on both sides of the connection. This makes configuration slightly more verbose but greatly simplifies implementation. If there are an inconsistencies, then DTS will not run until that issue is fixed. An example inconsistency would be port 1, node 1 says it is connected to port 1, node 2, but port 1, node 2 says it is connected to port 2, node 1.", + "properties": { + "pci": { + "$ref": "#/definitions/pci_address", + "description": "The local PCI address of the port" + }, + "os_driver_for_dpdk": { + "type": "string", + "description": "The driver that the kernel should bind this device to for DPDK to use it. (ex: vfio-pci)" + }, + "os_driver": { + "type": "string", + "description": "The driver normally used by this port (ex: i40e)" + }, + "peer_node": { + "type": "string", + "description": "The name of the node the peer port is on" + }, + "peer_pci": { + "$ref": "#/definitions/pci_address", + "description": "The PCI address of the peer port" + } + }, + "additionalProperties": false, + "required": [ + "pci", + "os_driver_for_dpdk", + "os_driver", + "peer_node", + "peer_pci" + ] + }, + "minimum": 1 } }, "additionalProperties": false, @@ -211,8 +332,27 @@ ] } }, + "skip_smoke_tests": { + "description": "Optional field that allows you to skip smoke testing", + "type": "boolean" + }, "system_under_test": { - "$ref": "#/definitions/node_name" + "type":"object", + "properties": { + "node_name": { + "$ref": "#/definitions/node_name" + }, + "vdevs": { + "description": "Opentional list of names of vdevs to be used in execution", + "type": "array", + "items": { + "type": "string" + } + } + }, + "required": [ + "node_name" + ] } }, "additionalProperties": false, diff --git a/dts/framework/dts.py b/dts/framework/dts.py index 05022845..7b09d8fb 100644 --- a/dts/framework/dts.py +++ b/dts/framework/dts.py @@ -5,7 +5,13 @@ import sys -from .config import CONFIGURATION, BuildTargetConfiguration, ExecutionConfiguration +from .config import ( + CONFIGURATION, + BuildTargetConfiguration, + ExecutionConfiguration, + TestSuiteConfig, +) +from .exception import BlockingTestSuiteError from .logger import DTSLOG, getLogger from .test_result import BuildTargetResult, DTSResult, ExecutionResult, Result from .test_suite import get_test_suites @@ -82,7 +88,7 @@ def _run_execution( running all build targets in the given execution. """ dts_logger.info(f"Running execution with SUT '{execution.system_under_test.name}'.") - execution_result = result.add_execution(sut_node.config) + execution_result = result.add_execution(sut_node.config, sut_node.node_info) try: sut_node.set_up_execution(execution) @@ -118,14 +124,15 @@ def _run_build_target( try: sut_node.set_up_build_target(build_target) - result.dpdk_version = sut_node.dpdk_version + # result.dpdk_version = sut_node.dpdk_version + build_target_result.add_build_target_versions(sut_node.get_build_target_info()) build_target_result.update_setup(Result.PASS) except Exception as e: dts_logger.exception("Build target setup failed.") build_target_result.update_setup(Result.FAIL, e) else: - _run_suites(sut_node, execution, build_target_result) + _run_all_suites(sut_node, execution, build_target_result) finally: try: @@ -136,7 +143,7 @@ def _run_build_target( build_target_result.update_teardown(Result.FAIL, e) -def _run_suites( +def _run_all_suites( sut_node: SutNode, execution: ExecutionConfiguration, build_target_result: BuildTargetResult, @@ -146,27 +153,61 @@ def _run_suites( with possibly only a subset of test cases. If no subset is specified, run all test cases. """ + end_build_target = False + if not execution.skip_smoke_tests: + execution.test_suites[:0] = [TestSuiteConfig.from_dict("smoke_tests")] for test_suite_config in execution.test_suites: try: - full_suite_path = f"tests.TestSuite_{test_suite_config.test_suite}" - test_suite_classes = get_test_suites(full_suite_path) - suites_str = ", ".join((x.__name__ for x in test_suite_classes)) - dts_logger.debug( - f"Found test suites '{suites_str}' in '{full_suite_path}'." + _run_single_suite( + sut_node, execution, build_target_result, test_suite_config ) - except Exception as e: - dts_logger.exception("An error occurred when searching for test suites.") - result.update_setup(Result.ERROR, e) - - else: - for test_suite_class in test_suite_classes: - test_suite = test_suite_class( - sut_node, - test_suite_config.test_cases, - execution.func, - build_target_result, - ) - test_suite.run() + except BlockingTestSuiteError as e: + dts_logger.exception( + f"An error occurred within {test_suite_config.test_suite}. " + "Skipping build target..." + ) + result.add_error(e) + end_build_target = True + # if a blocking test failed and we need to bail out of suite executions + if end_build_target: + break + + +def _run_single_suite( + sut_node: SutNode, + execution: ExecutionConfiguration, + build_target_result: BuildTargetResult, + test_suite_config: TestSuiteConfig, +) -> None: + """Runs a single test suite. + + Args: + sut_node: Node to run tests on. + execution: Execution the test case belongs to. + build_target_result: Build target configuration test case is run on + test_suite_config: Test suite configuration + + Raises: + BlockingTestSuiteError: If a test suite that was marked as blocking fails. + """ + try: + full_suite_path = f"tests.TestSuite_{test_suite_config.test_suite}" + test_suite_classes = get_test_suites(full_suite_path) + suites_str = ", ".join((x.__name__ for x in test_suite_classes)) + dts_logger.debug(f"Found test suites '{suites_str}' in '{full_suite_path}'.") + except Exception as e: + dts_logger.exception("An error occurred when searching for test suites.") + result.update_setup(Result.ERROR, e) + + else: + for test_suite_class in test_suite_classes: + test_suite = test_suite_class( + sut_node, + test_suite_config.test_cases, + execution.func, + build_target_result, + ) + test_suite.run() def _exit_dts() -> None: diff --git a/dts/framework/exception.py b/dts/framework/exception.py index ca353d98..dfb12df4 100644 --- a/dts/framework/exception.py +++ b/dts/framework/exception.py @@ -25,6 +25,7 @@ class ErrorSeverity(IntEnum): SSH_ERR = 4 DPDK_BUILD_ERR = 10 TESTCASE_VERIFY_ERR = 20 + BLOCKING_TESTSUITE_ERR = 25 class DTSError(Exception): @@ -144,3 +145,14 @@ def __init__(self, value: str): def __str__(self) -> str: return repr(self.value) + + +class BlockingTestSuiteError(DTSError): + suite_name: str + severity: ClassVar[ErrorSeverity] = ErrorSeverity.BLOCKING_TESTSUITE_ERR + + def __init__(self, suite_name: str) -> None: + self.suite_name = suite_name + + def __str__(self) -> str: + return f"Blocking suite {self.suite_name} failed." diff --git a/dts/framework/remote_session/__init__.py b/dts/framework/remote_session/__init__.py index ee221503..2c408c25 100644 --- a/dts/framework/remote_session/__init__.py +++ b/dts/framework/remote_session/__init__.py @@ -1,5 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2023 PANTHEON.tech s.r.o. +# Copyright(c) 2023 University of New Hampshire """ The package provides modules for managing remote connections to a remote host (node), @@ -17,7 +18,15 @@ from .linux_session import LinuxSession from .os_session import OSSession -from .remote import CommandResult, RemoteSession, SSHSession +from .remote import ( + CommandResult, + InteractiveRemoteSession, + InteractiveShell, + RemoteSession, + SSHSession, + TestPmdDevice, + TestPmdShell, +) def create_session( diff --git a/dts/framework/remote_session/os_session.py b/dts/framework/remote_session/os_session.py index 4c48ae25..48f05c44 100644 --- a/dts/framework/remote_session/os_session.py +++ b/dts/framework/remote_session/os_session.py @@ -5,14 +5,22 @@ from abc import ABC, abstractmethod from collections.abc import Iterable from pathlib import PurePath +from typing import Union -from framework.config import Architecture, NodeConfiguration +from framework.config import Architecture, InteractiveApp, NodeConfiguration, NodeInfo from framework.logger import DTSLOG +from framework.remote_session.remote import InteractiveShell, TestPmdShell from framework.settings import SETTINGS from framework.testbed_model import LogicalCore from framework.utils import EnvVarsDict, MesonArgs -from .remote import CommandResult, RemoteSession, create_remote_session +from .remote import ( + CommandResult, + InteractiveRemoteSession, + RemoteSession, + create_interactive_session, + create_remote_session, +) class OSSession(ABC): @@ -26,6 +34,7 @@ class OSSession(ABC): name: str _logger: DTSLOG remote_session: RemoteSession + interactive_session: InteractiveRemoteSession def __init__( self, @@ -37,6 +46,7 @@ def __init__( self.name = name self._logger = logger self.remote_session = create_remote_session(node_config, name, logger) + self.interactive_session = create_interactive_session(node_config, name, logger) def close(self, force: bool = False) -> None: """ @@ -64,6 +74,33 @@ def send_command( """ return self.remote_session.send_command(command, timeout, verify, env) + def create_interactive_shell( + self, + shell_type: InteractiveApp, + path_to_app: PurePath, + eal_parameters: str, + timeout: float, + ) -> Union[InteractiveShell, TestPmdShell]: + """ + See "create_interactive_shell" in SutNode + """ + match (shell_type): + case InteractiveApp.testpmd: + return TestPmdShell( + self.interactive_session.session, + self._logger, + path_to_app, + timeout=timeout, + eal_flags=eal_parameters, + ) + case _: + self._logger.info( + f"Unhandled app type {shell_type.name}, defaulting to shell." + ) + return InteractiveShell( + self.interactive_session.session, self._logger, path_to_app, timeout + ) + @abstractmethod def guess_dpdk_remote_dir(self, remote_dir) -> PurePath: """ @@ -173,3 +210,15 @@ def setup_hugepages(self, hugepage_amount: int, force_first_numa: bool) -> None: if needed and mount the hugepages if needed. If force_first_numa is True, configure hugepages just on the first socket. """ + + @abstractmethod + def get_compiler_version(self, compiler_name: str) -> str: + """ + Get installed version of compiler used for DPDK + """ + + @abstractmethod + def get_node_info(self) -> NodeInfo: + """ + Collect information about the node + """ diff --git a/dts/framework/remote_session/posix_session.py b/dts/framework/remote_session/posix_session.py index d38062e8..4e419877 100644 --- a/dts/framework/remote_session/posix_session.py +++ b/dts/framework/remote_session/posix_session.py @@ -6,7 +6,7 @@ from collections.abc import Iterable from pathlib import PurePath, PurePosixPath -from framework.config import Architecture +from framework.config import Architecture, NodeInfo from framework.exception import DPDKBuildError, RemoteCommandExecutionError from framework.settings import SETTINGS from framework.utils import EnvVarsDict, MesonArgs @@ -219,3 +219,30 @@ def _remove_dpdk_runtime_dirs( def get_dpdk_file_prefix(self, dpdk_prefix) -> str: return "" + + def get_compiler_version(self, compiler_name: str) -> str: + match compiler_name: + case "gcc": + return self.send_command( + f"{compiler_name} --version", SETTINGS.timeout + ).stdout.split("\n")[0] + case "clang": + return self.send_command( + f"{compiler_name} --version", SETTINGS.timeout + ).stdout.split("\n")[0] + case "msvc": + return self.send_command("cl", SETTINGS.timeout).stdout + case "icc": + return self.send_command(f"{compiler_name} -V", SETTINGS.timeout).stdout + case _: + raise ValueError(f"Unknown compiler {compiler_name}") + + def get_node_info(self) -> NodeInfo: + os_release_info = self.send_command( + "awk -F= '$1 ~ /^NAME$|^VERSION$/ {print $2}' /etc/os-release", + SETTINGS.timeout, + ).stdout.split("\n") + kernel_version = self.send_command("uname -r", SETTINGS.timeout).stdout + return NodeInfo( + os_release_info[0].strip(), os_release_info[1].strip(), kernel_version + ) diff --git a/dts/framework/remote_session/remote/__init__.py b/dts/framework/remote_session/remote/__init__.py index 8a151221..03fd309f 100644 --- a/dts/framework/remote_session/remote/__init__.py +++ b/dts/framework/remote_session/remote/__init__.py @@ -1,16 +1,26 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2023 PANTHEON.tech s.r.o. +# Copyright(c) 2023 University of New Hampshire # pylama:ignore=W0611 from framework.config import NodeConfiguration from framework.logger import DTSLOG +from .interactive_remote_session import InteractiveRemoteSession +from .interactive_shell import InteractiveShell from .remote_session import CommandResult, RemoteSession from .ssh_session import SSHSession +from .testpmd_shell import TestPmdDevice, TestPmdShell def create_remote_session( node_config: NodeConfiguration, name: str, logger: DTSLOG ) -> RemoteSession: return SSHSession(node_config, name, logger) + + +def create_interactive_session( + node_config: NodeConfiguration, name: str, logger: DTSLOG +) -> InteractiveRemoteSession: + return InteractiveRemoteSession(node_config, logger) diff --git a/dts/framework/remote_session/remote/interactive_remote_session.py b/dts/framework/remote_session/remote/interactive_remote_session.py new file mode 100644 index 00000000..2d94daf2 --- /dev/null +++ b/dts/framework/remote_session/remote/interactive_remote_session.py @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2023 University of New Hampshire + +import socket +import traceback + +from paramiko import AutoAddPolicy, SSHClient, Transport # type: ignore +from paramiko.ssh_exception import ( # type: ignore + AuthenticationException, + BadHostKeyException, + NoValidConnectionsError, + SSHException, +) + +from framework.config import NodeConfiguration +from framework.exception import SSHConnectionError +from framework.logger import DTSLOG + + +class InteractiveRemoteSession: + hostname: str + ip: str + port: int + username: str + password: str + _logger: DTSLOG + _node_config: NodeConfiguration + session: SSHClient + _transport: Transport | None + + def __init__(self, node_config: NodeConfiguration, _logger: DTSLOG) -> None: + self._node_config = node_config + self._logger = _logger + self.hostname = node_config.hostname + self.username = node_config.user + self.password = node_config.password if node_config.password else "" + port = "22" + self.ip = node_config.hostname + if ":" in node_config.hostname: + self.ip, port = node_config.hostname.split(":") + self.port = int(port) + self._logger.info( + f"Initializing interactive connection for {self.username}@{self.hostname}" + ) + self._connect() + self._logger.info( + f"Interactive connection successful for {self.username}@{self.hostname}" + ) + + def _connect(self) -> None: + client = SSHClient() + client.set_missing_host_key_policy(AutoAddPolicy) + self.session = client + retry_attempts = 10 + for retry_attempt in range(retry_attempts): + try: + client.connect( + self.ip, + username=self.username, + port=self.port, + password=self.password, + timeout=20 if self.port else 10, + ) + except (TypeError, BadHostKeyException, AuthenticationException) as e: + self._logger.exception(e) + raise SSHConnectionError(self.hostname) from e + except (NoValidConnectionsError, socket.error, SSHException) as e: + self._logger.debug(traceback.format_exc()) + self._logger.warning(e) + self._logger.info( + "Retrying interactive session connection: " + f"retry number {retry_attempt +1}" + ) + else: + break + else: + raise SSHConnectionError(self.hostname) + # Interactive sessions are used on an "as needed" basis so we have + # to set a keepalive + self._transport = self.session.get_transport() + if self._transport is not None: + self._transport.set_keepalive(30) diff --git a/dts/framework/remote_session/remote/interactive_shell.py b/dts/framework/remote_session/remote/interactive_shell.py new file mode 100644 index 00000000..0cb0f7b4 --- /dev/null +++ b/dts/framework/remote_session/remote/interactive_shell.py @@ -0,0 +1,75 @@ +from pathlib import PurePath + +from paramiko import Channel, SSHClient, channel # type: ignore + +from framework.logger import DTSLOG +from framework.settings import SETTINGS + + +class InteractiveShell: + + _interactive_session: SSHClient + _stdin: channel.ChannelStdinFile + _stdout: channel.ChannelFile + _ssh_channel: Channel + _logger: DTSLOG + _timeout: float + _path_to_app: PurePath + + def __init__( + self, + interactive_session: SSHClient, + logger: DTSLOG, + path_to_app: PurePath, + timeout: float = SETTINGS.timeout, + ) -> None: + self._interactive_session = interactive_session + self._ssh_channel = self._interactive_session.invoke_shell() + self._stdin = self._ssh_channel.makefile_stdin("w") + self._stdout = self._ssh_channel.makefile("r") + self._ssh_channel.settimeout(timeout) + self._ssh_channel.set_combine_stderr(True) # combines stdout and stderr streams + self._logger = logger + self._timeout = timeout + self._path_to_app = path_to_app + self._start_application() + + def _start_application(self) -> None: + """Starts a new interactive application based on _path_to_app. + + This method is often overridden by subclasses as their process for + starting may look different. + """ + self.send_command_get_output(f"{self._path_to_app}", "") + + def send_command_get_output(self, command: str, prompt: str) -> str: + """Send a command and get all output before the expected ending string. + + Lines that expect input are not included in the stdout buffer so they cannot be + used for expect. For example, if you were prompted to log into something + with a username and password, you cannot expect "username:" because it won't + yet be in the stdout buffer. A work around for this could be consuming an + extra newline character to force the current prompt into the stdout buffer. + + Returns: + All output in the buffer before expected string + """ + self._logger.info(f"Sending command {command.strip()}...") + self._stdin.write(f"{command}\n") + self._stdin.flush() + out: str = "" + for line in self._stdout: + out += line + if prompt in line and not line.rstrip().endswith( + command.rstrip() + ): # ignore line that sent command + break + self._logger.debug(f"Got output: {out}") + return out + + def close(self) -> None: + self._stdin.close() + self._ssh_channel.close() + + def __del__(self) -> None: + self.close() diff --git a/dts/framework/remote_session/remote/testpmd_shell.py b/dts/framework/remote_session/remote/testpmd_shell.py new file mode 100644 index 00000000..31c25258 --- /dev/null +++ b/dts/framework/remote_session/remote/testpmd_shell.py @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2023 University of New Hampshire + + +from pathlib import PurePath + +from paramiko import SSHClient # type: ignore + +from framework.logger import DTSLOG +from framework.settings import SETTINGS + +from .interactive_shell import InteractiveShell + + +class TestPmdDevice(object): + pci_address: str + + def __init__(self, pci_address: str): + self.pci_address = pci_address + + def __str__(self) -> str: + return self.pci_address + + +class TestPmdShell(InteractiveShell): + expected_prompt: str = "testpmd>" + _eal_flags: str + + def __init__( + self, + interactive_session: SSHClient, + logger: DTSLOG, + path_to_testpmd: PurePath, + eal_flags: str, + timeout: float = SETTINGS.timeout, + ) -> None: + """Initializes an interactive testpmd session using specified parameters.""" + self._eal_flags = eal_flags + + super(TestPmdShell, self).__init__( + interactive_session, + logger=logger, + path_to_app=path_to_testpmd, + timeout=timeout, + ) + + def _start_application(self) -> None: + """Starts a new interactive testpmd shell using _path_to_app.""" + self.send_command( + f"{self._path_to_app} {self._eal_flags} -- -i", + ) + + def send_command(self, command: str, prompt: str = expected_prompt) -> str: + """Specific way of handling the command for testpmd + + An extra newline character is consumed in order to force the current line into + the stdout buffer. + """ + return self.send_command_get_output(f"{command}\n", prompt) + + def get_devices(self) -> list[TestPmdDevice]: + """Get a list of device names that are known to testpmd + + Uses the device info listed in testpmd and then parses the output to + return only the names of the devices. + + Returns: + A list of strings representing device names (e.g. 0000:14:00.1) + """ + dev_info: str = self.send_command("show device info all") + dev_list: list[TestPmdDevice] = [] + for line in dev_info.split("\n"): + if "device name:" in line.lower(): + dev_list.append(TestPmdDevice(line.strip().split(": ")[1].strip())) + return dev_list diff --git a/dts/framework/test_result.py b/dts/framework/test_result.py index 74391982..fe199467 100644 --- a/dts/framework/test_result.py +++ b/dts/framework/test_result.py @@ -1,5 +1,6 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2023 PANTHEON.tech s.r.o. +# Copyright(c) 2023 University of New Hampshire """ Generic result container and reporters @@ -13,9 +14,11 @@ OS, Architecture, BuildTargetConfiguration, + BuildTargetInfo, Compiler, CPUType, NodeConfiguration, + NodeInfo, ) from .exception import DTSError, ErrorSeverity from .logger import DTSLOG @@ -67,12 +70,14 @@ class Statistics(dict): Using a dict provides a convenient way to format the data. """ - def __init__(self, dpdk_version): + def __init__(self, output_info: dict[str, str] | None): super(Statistics, self).__init__() for result in Result: self[result.name] = 0 self["PASS RATE"] = 0.0 - self["DPDK VERSION"] = dpdk_version + if output_info: + for info_key, info_val in output_info.items(): + self[info_key] = info_val def __iadd__(self, other: Result) -> "Statistics": """ @@ -206,6 +211,8 @@ class BuildTargetResult(BaseResult): os: OS cpu: CPUType compiler: Compiler + compiler_version: str | None + dpdk_version: str | None def __init__(self, build_target: BuildTargetConfiguration): super(BuildTargetResult, self).__init__() @@ -213,6 +220,12 @@ def __init__(self, build_target: BuildTargetConfiguration): self.os = build_target.os self.cpu = build_target.cpu self.compiler = build_target.compiler + self.compiler_version = None + self.dpdk_version = None + + def add_build_target_versions(self, versions: BuildTargetInfo) -> None: + self.compiler_version = versions.compiler_version + self.dpdk_version = versions.dpdk_version def add_test_suite(self, test_suite_name: str) -> TestSuiteResult: test_suite_result = TestSuiteResult(test_suite_name) @@ -228,10 +241,17 @@ class ExecutionResult(BaseResult): """ sut_node: NodeConfiguration + sut_os_name: str + sut_os_version: str + sut_kernel_version: str - def __init__(self, sut_node: NodeConfiguration): + def __init__(self, sut_node: NodeConfiguration, sut_version_info: NodeInfo): super(ExecutionResult, self).__init__() self.sut_node = sut_node + self.sut_version_info = sut_version_info + self.sut_os_name = sut_version_info.os_name + self.sut_os_version = sut_version_info.os_version + self.sut_kernel_version = sut_version_info.kernel_version def add_build_target( self, build_target: BuildTargetConfiguration @@ -258,6 +278,7 @@ class DTSResult(BaseResult): """ dpdk_version: str | None + output: dict | None _logger: DTSLOG _errors: list[Exception] _return_code: ErrorSeverity @@ -267,14 +288,17 @@ class DTSResult(BaseResult): def __init__(self, logger: DTSLOG): super(DTSResult, self).__init__() self.dpdk_version = None + self.output = None self._logger = logger self._errors = [] self._return_code = ErrorSeverity.NO_ERR self._stats_result = None self._stats_filename = os.path.join(SETTINGS.output_dir, "statistics.txt") - def add_execution(self, sut_node: NodeConfiguration) -> ExecutionResult: - execution_result = ExecutionResult(sut_node) + def add_execution( + self, sut_node: NodeConfiguration, sut_version_info: NodeInfo + ) -> ExecutionResult: + execution_result = ExecutionResult(sut_node, sut_version_info) self._inner_results.append(execution_result) return execution_result @@ -296,7 +320,8 @@ def process(self) -> None: for error in self._errors: self._logger.debug(repr(error)) - self._stats_result = Statistics(self.dpdk_version) + self._stats_result = Statistics(self.output) + # add information gathered from the smoke tests to the statistics self.add_stats(self._stats_result) with open(self._stats_filename, "w+") as stats_file: stats_file.write(str(self._stats_result)) diff --git a/dts/framework/test_suite.py b/dts/framework/test_suite.py index 0705f38f..de94c933 100644 --- a/dts/framework/test_suite.py +++ b/dts/framework/test_suite.py @@ -11,7 +11,12 @@ import re from types import MethodType -from .exception import ConfigurationError, SSHTimeoutError, TestCaseVerifyError +from .exception import ( + BlockingTestSuiteError, + ConfigurationError, + SSHTimeoutError, + TestCaseVerifyError, +) from .logger import DTSLOG, getLogger from .settings import SETTINGS from .test_result import BuildTargetResult, Result, TestCaseResult, TestSuiteResult @@ -37,6 +42,7 @@ class TestSuite(object): """ sut_node: SutNode + is_blocking = False _logger: DTSLOG _test_cases_to_run: list[str] _func: bool @@ -118,6 +124,8 @@ def run(self) -> None: f"the next test suite may be affected." ) self._result.update_setup(Result.ERROR, e) + if len(self._result.get_errors()) > 0 and self.is_blocking: + raise BlockingTestSuiteError(test_suite_name) def _execute_test_suite(self) -> None: """ diff --git a/dts/framework/testbed_model/node.py b/dts/framework/testbed_model/node.py index d48fafe6..c5147e0e 100644 --- a/dts/framework/testbed_model/node.py +++ b/dts/framework/testbed_model/node.py @@ -40,6 +40,7 @@ class Node(object): lcores: list[LogicalCore] _logger: DTSLOG _other_sessions: list[OSSession] + _execution_config: ExecutionConfiguration def __init__(self, node_config: NodeConfiguration): self.config = node_config @@ -64,6 +65,7 @@ def set_up_execution(self, execution_config: ExecutionConfiguration) -> None: """ self._setup_hugepages() self._set_up_execution(execution_config) + self._execution_config = execution_config def _set_up_execution(self, execution_config: ExecutionConfiguration) -> None: """ diff --git a/dts/framework/testbed_model/sut_node.py b/dts/framework/testbed_model/sut_node.py index 2b2b50d9..6783e0b8 100644 --- a/dts/framework/testbed_model/sut_node.py +++ b/dts/framework/testbed_model/sut_node.py @@ -1,14 +1,27 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2010-2014 Intel Corporation # Copyright(c) 2023 PANTHEON.tech s.r.o. +# Copyright(c) 2023 University of New Hampshire import os import tarfile import time from pathlib import PurePath - -from framework.config import BuildTargetConfiguration, NodeConfiguration -from framework.remote_session import CommandResult, OSSession +from typing import Union + +from framework.config import ( + BuildTargetConfiguration, + BuildTargetInfo, + InteractiveApp, + NodeConfiguration, + NodeInfo, +) +from framework.remote_session import ( + CommandResult, + InteractiveShell, + OSSession, + TestPmdShell, +) from framework.settings import SETTINGS from framework.utils import EnvVarsDict, MesonArgs @@ -16,6 +29,52 @@ from .node import Node +class EalParameters(object): + def __init__( + self, + lcore_list: LogicalCoreList, + memory_channels: int, + prefix: str, + no_pci: bool, + vdevs: list[VirtualDevice], + other_eal_param: str, + ): + """ + Generate eal parameters character string; + :param lcore_list: the list of logical cores to use. + :param memory_channels: the number of memory channels to use. + :param prefix: set file prefix string, eg: + prefix='vf' + :param no_pci: switch of disable PCI bus eg: + no_pci=True + :param vdevs: virtual device list, eg: + vdevs=[ + VirtualDevice('net_ring0'), + VirtualDevice('net_ring1') + ] + :param other_eal_param: user defined DPDK eal parameters, eg: + other_eal_param='--single-file-segments' + """ + self._lcore_list = f"-l {lcore_list}" + self._memory_channels = f"-n {memory_channels}" + self._prefix = prefix + if prefix: + self._prefix = f"--file-prefix={prefix}" + self._no_pci = "--no-pci" if no_pci else "" + self._vdevs = " ".join(f"--vdev {vdev}" for vdev in vdevs) + self._other_eal_param = other_eal_param + + def __str__(self) -> str: + return ( + f"{self._lcore_list} " + f"{self._memory_channels} " + f"{self._prefix} " + f"{self._no_pci} " + f"{self._vdevs} " + f"{self._other_eal_param}" + ) + + class SutNode(Node): """ A class for managing connections to the System under Test, providing @@ -30,9 +89,11 @@ class SutNode(Node): _env_vars: EnvVarsDict _remote_tmp_dir: PurePath __remote_dpdk_dir: PurePath | None - _dpdk_version: str | None _app_compile_timeout: float _dpdk_kill_session: OSSession | None + _dpdk_version: str | None + _node_info: NodeInfo | None + _compiler_version: str | None def __init__(self, node_config: NodeConfiguration): super(SutNode, self).__init__(node_config) @@ -41,12 +102,14 @@ def __init__(self, node_config: NodeConfiguration): self._env_vars = EnvVarsDict() self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() self.__remote_dpdk_dir = None - self._dpdk_version = None self._app_compile_timeout = 90 self._dpdk_kill_session = None self._dpdk_timestamp = ( f"{str(os.getpid())}_{time.strftime('%Y%m%d%H%M%S', time.localtime())}" ) + self._dpdk_version = None + self._node_info = None + self._compiler_version = None @property def _remote_dpdk_dir(self) -> PurePath: @@ -75,6 +138,32 @@ def dpdk_version(self) -> str: ) return self._dpdk_version + @property + def node_info(self) -> NodeInfo: + if self._node_info is None: + self._node_info = self.main_session.get_node_info() + return self._node_info + + @property + def compiler_version(self) -> str: + if self._compiler_version is None: + if self._build_target_config is not None: + self._compiler_version = self.main_session.get_compiler_version( + self._build_target_config.compiler.name + ) + else: + self._logger.warning( + "Failed to get compiler version because" + "_build_target_config is None." + ) + return "" + return self._compiler_version + + def get_build_target_info(self) -> BuildTargetInfo: + return BuildTargetInfo( + dpdk_version=self.dpdk_version, compiler_version=self.compiler_version + ) + def _guess_dpdk_remote_dir(self) -> PurePath: return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir) @@ -84,6 +173,10 @@ def _set_up_build_target( """ Setup DPDK on the SUT node. """ + # we want to ensure that dpdk_version and compiler_version is reset for new + # build targets + self._dpdk_version = None + self._compiler_version = None self._configure_build_target(build_target_config) self._copy_dpdk_tarball() self._build_dpdk() @@ -262,48 +355,37 @@ def run_dpdk_app( f"{app_path} {eal_args}", timeout, verify=True ) - -class EalParameters(object): - def __init__( + def create_interactive_shell( self, - lcore_list: LogicalCoreList, - memory_channels: int, - prefix: str, - no_pci: bool, - vdevs: list[VirtualDevice], - other_eal_param: str, - ): + shell_type: InteractiveApp, + timeout: float = SETTINGS.timeout, + eal_parameters: EalParameters | None = None, + ) -> Union[InteractiveShell, TestPmdShell]: + """Create a handler for an interactive session. + + This method is a factory that calls a method in OSSession to create shells for + different DPDK applications. + + Args: + shell_type: Enum value representing the desired application. + timeout: Timeout for reading output from the SSH channel. If you are + reading from the buffer and don't receive any data within the timeout + it will throw an error. + eal_parameters: List of EAL parameters to use to launch the app. If this + isn't provided, it will default to calling create_eal_parameters(). + This is ignored for base "shell" types. + Returns: + Instance of the desired interactive application. """ - Generate eal parameters character string; - :param lcore_list: the list of logical cores to use. - :param memory_channels: the number of memory channels to use. - :param prefix: set file prefix string, eg: - prefix='vf' - :param no_pci: switch of disable PCI bus eg: - no_pci=True - :param vdevs: virtual device list, eg: - vdevs=[ - VirtualDevice('net_ring0'), - VirtualDevice('net_ring1') - ] - :param other_eal_param: user defined DPDK eal parameters, eg: - other_eal_param='--single-file-segments' - """ - self._lcore_list = f"-l {lcore_list}" - self._memory_channels = f"-n {memory_channels}" - self._prefix = prefix - if prefix: - self._prefix = f"--file-prefix={prefix}" - self._no_pci = "--no-pci" if no_pci else "" - self._vdevs = " ".join(f"--vdev {vdev}" for vdev in vdevs) - self._other_eal_param = other_eal_param - - def __str__(self) -> str: - return ( - f"{self._lcore_list} " - f"{self._memory_channels} " - f"{self._prefix} " - f"{self._no_pci} " - f"{self._vdevs} " - f"{self._other_eal_param}" + if not eal_parameters: + eal_parameters = self.create_eal_parameters() + + # We need to append the build directory for DPDK apps + shell_type.path = self.remote_dpdk_build_dir.joinpath(shell_type.path) + default_path = self.main_session.join_remote_path(shell_type.path) + return self.main_session.create_interactive_shell( + shell_type, + default_path, + str(eal_parameters), + timeout, ) diff --git a/dts/framework/utils.py b/dts/framework/utils.py index 55e0b0ef..2ee67145 100644 --- a/dts/framework/utils.py +++ b/dts/framework/utils.py @@ -5,6 +5,8 @@ import sys +REGEX_FOR_PCI_ADDRESS = "/[0-9a-fA-F]{4}:[0-9a-fA-F]{2}:[0-9a-fA-F]{2}.[0-9]{1}/" + def check_dts_python_version() -> None: if sys.version_info.major < 3 or ( diff --git a/dts/tests/TestSuite_smoke_tests.py b/dts/tests/TestSuite_smoke_tests.py new file mode 100644 index 00000000..9cf54720 --- /dev/null +++ b/dts/tests/TestSuite_smoke_tests.py @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2023 University of New Hampshire + +import re + +from framework.config import InteractiveApp, PortConfig +from framework.remote_session import TestPmdDevice, TestPmdShell +from framework.settings import SETTINGS +from framework.test_suite import TestSuite +from framework.utils import REGEX_FOR_PCI_ADDRESS + + +class SmokeTests(TestSuite): + is_blocking = True + # dicts in this list are expected to have two keys: + # "pci_address" and "current_driver" + nics_in_node: list[PortConfig] = [] + + def set_up_suite(self) -> None: + """ + Setup: + Set the build directory path and generate a list of NICs in the SUT node. + """ + self.dpdk_build_dir_path = self.sut_node.remote_dpdk_build_dir + self.nics_in_node = self.sut_node.config.ports + + def test_unit_tests(self) -> None: + """ + Test: + Run the fast-test unit-test suite through meson. + """ + self.sut_node.main_session.send_command( + f"meson test -C {self.dpdk_build_dir_path} --suite fast-tests", + 300, + verify=True, + ) + + def test_driver_tests(self) -> None: + """ + Test: + Run the driver-test unit-test suite through meson. + """ + list_of_vdevs = "" + for dev in self.sut_node._execution_config.vdevs: + list_of_vdevs += f"--vdev {dev} " + list_of_vdevs = list_of_vdevs[:-1] + if list_of_vdevs: + self._logger.info( + "Running driver tests with the following virtual " + f"devices: {list_of_vdevs}" + ) + self.sut_node.main_session.send_command( + f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests " + f'--test-args "{list_of_vdevs}"', + 300, + verify=True, + ) + else: + self.sut_node.main_session.send_command( + f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests", + 300, + verify=True, + ) + + def test_devices_listed_in_testpmd(self) -> None: + """ + Test: + Uses testpmd driver to verify that devices have been found by testpmd. + """ + testpmd_driver = self.sut_node.create_interactive_shell(InteractiveApp.testpmd) + # We know it should always be a TestPmdShell but mypy doesn't + assert isinstance(testpmd_driver, TestPmdShell) + dev_list: list[TestPmdDevice] = testpmd_driver.get_devices() + for nic in self.nics_in_node: + self.verify( + nic.pci in map(str, dev_list), + f"Device {nic.pci} was not listed in testpmd's available devices, " + "please check your configuration", + ) + + def test_device_bound_to_driver(self) -> None: + """ + Test: + Ensure that all drivers listed in the config are bound to the correct driver. + """ + path_to_devbind = self.sut_node.main_session.join_remote_path( + self.sut_node._remote_dpdk_dir, "usertools", "dpdk-devbind.py" + ) + + all_nics_in_dpdk_devbind = self.sut_node.main_session.send_command( + f"{path_to_devbind} --status | awk '{REGEX_FOR_PCI_ADDRESS}'", + SETTINGS.timeout, + ).stdout + + for nic in self.nics_in_node: + # This regular expression finds the line in the above string that starts + # with the address for the nic we are on in the loop and then captures the + # name of the driver in a group + devbind_info_for_nic = re.search( + f"{nic.pci}[^\\n]*drv=([\\d\\w]*) [^\\n]*", + all_nics_in_dpdk_devbind, + ) + self.verify( + devbind_info_for_nic is not None, + f"Failed to find configured device ({nic.pci}) using dpdk-devbind.py", + ) + # We know this isn't None, but mypy doesn't + assert devbind_info_for_nic is not None + self.verify( + devbind_info_for_nic.group(1) == nic.os_driver, + f"Driver for device {nic.pci} does not match driver listed in " + f"configuration (bound to {devbind_info_for_nic.group(1)})", + ) -- 2.41.0 ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v5 1/2] dts: add smoke tests 2023-07-12 19:18 ` [PATCH v5 1/2] dts: add " jspewock @ 2023-07-12 20:00 ` Jeremy Spewock 2023-07-13 5:46 ` Juraj Linkeš 0 siblings, 1 reply; 5+ messages in thread From: Jeremy Spewock @ 2023-07-12 20:00 UTC (permalink / raw) To: Honnappa.Nagarahalli, juraj.linkes, thomas, lijuan.tu, wathsala.vithanage, probb Cc: dev [-- Attachment #1: Type: text/plain, Size: 61685 bytes --] This fails to apply because it modifies some of the same files that the previous DTS patches that were applied today also change. These changes only modify things in dts/ which isn't currently being used in CI testing so there wouldn't be any breaking changes for these builds regardless. Apologies for my lack of knowledge on how this is handled, but are these conflicts something that I need to fix in my patch or are instead handled by maintainers who are applying and merging the patches on these release candidates? Thanks, Jeremy On Wed, Jul 12, 2023 at 3:21 PM <jspewock@iol.unh.edu> wrote: > From: Jeremy Spewock <jspewock@iol.unh.edu> > > Adds a new test suite for running smoke tests that verify general > configuration aspects of the system under test. If any of these tests > fail, the DTS execution terminates as part of a "fail-fast" model. > > Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu> > --- > dts/conf.yaml | 17 +- > dts/framework/config/__init__.py | 105 +++++++++-- > dts/framework/config/conf_yaml_schema.json | 142 +++++++++++++- > dts/framework/dts.py | 87 ++++++--- > dts/framework/exception.py | 12 ++ > dts/framework/remote_session/__init__.py | 11 +- > dts/framework/remote_session/os_session.py | 53 +++++- > dts/framework/remote_session/posix_session.py | 29 ++- > .../remote_session/remote/__init__.py | 10 + > .../remote/interactive_remote_session.py | 82 ++++++++ > .../remote/interactive_shell.py | 75 ++++++++ > .../remote_session/remote/testpmd_shell.py | 75 ++++++++ > dts/framework/test_result.py | 37 +++- > dts/framework/test_suite.py | 10 +- > dts/framework/testbed_model/node.py | 2 + > dts/framework/testbed_model/sut_node.py | 176 +++++++++++++----- > dts/framework/utils.py | 2 + > dts/tests/TestSuite_smoke_tests.py | 113 +++++++++++ > 18 files changed, 941 insertions(+), 97 deletions(-) > create mode 100644 > dts/framework/remote_session/remote/interactive_remote_session.py > create mode 100644 > dts/framework/remote_session/remote/interactive_shell.py > create mode 100644 dts/framework/remote_session/remote/testpmd_shell.py > create mode 100644 dts/tests/TestSuite_smoke_tests.py > > diff --git a/dts/conf.yaml b/dts/conf.yaml > index a9bd8a3e..c0be7848 100644 > --- a/dts/conf.yaml > +++ b/dts/conf.yaml > @@ -10,9 +10,13 @@ executions: > compiler_wrapper: ccache > perf: false > func: true > + skip_smoke_tests: false # optional flag that allow you to skip smoke > tests > test_suites: > - hello_world > - system_under_test: "SUT 1" > + system_under_test: > + node_name: "SUT 1" > + vdevs: # optional; if removed, vdevs won't be used in the execution > + - "crypto_openssl" > nodes: > - name: "SUT 1" > hostname: sut1.change.me.localhost > @@ -25,3 +29,14 @@ nodes: > hugepages: # optional; if removed, will use system hugepage > configuration > amount: 256 > force_first_numa: false > + ports: > + - pci: "0000:00:08.0" > + os_driver_for_dpdk: vfio-pci # OS driver that DPDK will use > + os_driver: i40e > + peer_node: "TG 1" > + peer_pci: "0000:00:08.0" > + - pci: "0000:00:08.1" > + os_driver_for_dpdk: vfio-pci > + os_driver: i40e > + peer_node: "TG 1" > + peer_pci: "0000:00:08.1" > diff --git a/dts/framework/config/__init__.py > b/dts/framework/config/__init__.py > index ebb0823f..9e144748 100644 > --- a/dts/framework/config/__init__.py > +++ b/dts/framework/config/__init__.py > @@ -12,6 +12,7 @@ > import pathlib > from dataclasses import dataclass > from enum import Enum, auto, unique > +from pathlib import PurePath > from typing import Any, TypedDict > > import warlock # type: ignore > @@ -72,6 +73,20 @@ class HugepageConfiguration: > force_first_numa: bool > > > +@dataclass(slots=True, frozen=True) > +class PortConfig: > + node: str > + pci: str > + os_driver_for_dpdk: str > + os_driver: str > + peer_node: str > + peer_pci: str > + > + @staticmethod > + def from_dict(node: str, d: dict) -> "PortConfig": > + return PortConfig(node=node, **d) > + > + > @dataclass(slots=True, frozen=True) > class NodeConfiguration: > name: str > @@ -84,6 +99,7 @@ class NodeConfiguration: > use_first_core: bool > memory_channels: int > hugepages: HugepageConfiguration | None > + ports: list[PortConfig] > > @staticmethod > def from_dict(d: dict) -> "NodeConfiguration": > @@ -92,19 +108,36 @@ def from_dict(d: dict) -> "NodeConfiguration": > if "force_first_numa" not in hugepage_config: > hugepage_config["force_first_numa"] = False > hugepage_config = HugepageConfiguration(**hugepage_config) > + common_config = { > + "name": d["name"], > + "hostname": d["hostname"], > + "user": d["user"], > + "password": d.get("password"), > + "arch": Architecture(d["arch"]), > + "os": OS(d["os"]), > + "lcores": d.get("lcores", "1"), > + "use_first_core": d.get("use_first_core", False), > + "memory_channels": d.get("memory_channels", 1), > + "hugepages": hugepage_config, > + "ports": [PortConfig.from_dict(d["name"], port) for port in > d["ports"]], > + } > + > + return NodeConfiguration(**common_config) > > - return NodeConfiguration( > - name=d["name"], > - hostname=d["hostname"], > - user=d["user"], > - password=d.get("password"), > - arch=Architecture(d["arch"]), > - os=OS(d["os"]), > - lcores=d.get("lcores", "1"), > - use_first_core=d.get("use_first_core", False), > - memory_channels=d.get("memory_channels", 1), > - hugepages=hugepage_config, > - ) > + > +@dataclass(slots=True, frozen=True) > +class NodeInfo: > + """Class to hold important versions within the node. > + > + This class, unlike the NodeConfiguration class, cannot be generated > at the start. > + This is because we need to initialize a connection with the node > before we can > + collect the information needed in this class. Therefore, it cannot be > a part of > + the configuration class above. > + """ > + > + os_name: str > + os_version: str > + kernel_version: str > > > @dataclass(slots=True, frozen=True) > @@ -128,6 +161,18 @@ def from_dict(d: dict) -> "BuildTargetConfiguration": > ) > > > +@dataclass(slots=True, frozen=True) > +class BuildTargetInfo: > + """Class to hold important versions within the build target. > + > + This is very similar to the NodeInfo class, it just instead holds > information > + for the build target. > + """ > + > + dpdk_version: str > + compiler_version: str > + > + > class TestSuiteConfigDict(TypedDict): > suite: str > cases: list[str] > @@ -157,6 +202,8 @@ class ExecutionConfiguration: > func: bool > test_suites: list[TestSuiteConfig] > system_under_test: NodeConfiguration > + vdevs: list[str] > + skip_smoke_tests: bool > > @staticmethod > def from_dict(d: dict, node_map: dict) -> "ExecutionConfiguration": > @@ -166,15 +213,20 @@ def from_dict(d: dict, node_map: dict) -> > "ExecutionConfiguration": > test_suites: list[TestSuiteConfig] = list( > map(TestSuiteConfig.from_dict, d["test_suites"]) > ) > - sut_name = d["system_under_test"] > + sut_name = d["system_under_test"]["node_name"] > + skip_smoke_tests = d.get("skip_smoke_tests", False) > assert sut_name in node_map, f"Unknown SUT {sut_name} in > execution {d}" > - > + vdevs = ( > + d["system_under_test"]["vdevs"] if "vdevs" in > d["system_under_test"] else [] > + ) > return ExecutionConfiguration( > build_targets=build_targets, > perf=d["perf"], > func=d["func"], > + skip_smoke_tests=skip_smoke_tests, > test_suites=test_suites, > system_under_test=node_map[sut_name], > + vdevs=vdevs, > ) > > > @@ -221,3 +273,28 @@ def load_config() -> Configuration: > > > CONFIGURATION = load_config() > + > + > +@unique > +class InteractiveApp(Enum): > + """An enum that represents different supported interactive > applications. > + > + The values in this enum must all be set to objects that have a key > called > + "default_path" where "default_path" represents a PurePath object for > the path > + to the application. This default path will be passed into the handler > class > + for the application so that it can start the application. > + """ > + > + testpmd = {"default_path": PurePath("app", "dpdk-testpmd")} > + > + @property > + def path(self) -> PurePath: > + """Default path of the application. > + > + For DPDK apps, this will be appended to the DPDK build directory. > + """ > + return self.value["default_path"] > + > + @path.setter > + def path(self, path: PurePath) -> None: > + self.value["default_path"] = path > diff --git a/dts/framework/config/conf_yaml_schema.json > b/dts/framework/config/conf_yaml_schema.json > index ca2d4a1e..61f52b43 100644 > --- a/dts/framework/config/conf_yaml_schema.json > +++ b/dts/framework/config/conf_yaml_schema.json > @@ -6,6 +6,76 @@ > "type": "string", > "description": "A unique identifier for a node" > }, > + "NIC": { > + "type": "string", > + "enum": [ > + "ALL", > + "ConnectX3_MT4103", > + "ConnectX4_LX_MT4117", > + "ConnectX4_MT4115", > + "ConnectX5_MT4119", > + "ConnectX5_MT4121", > + "I40E_10G-10G_BASE_T_BC", > + "I40E_10G-10G_BASE_T_X722", > + "I40E_10G-SFP_X722", > + "I40E_10G-SFP_XL710", > + "I40E_10G-X722_A0", > + "I40E_1G-1G_BASE_T_X722", > + "I40E_25G-25G_SFP28", > + "I40E_40G-QSFP_A", > + "I40E_40G-QSFP_B", > + "IAVF-ADAPTIVE_VF", > + "IAVF-VF", > + "IAVF_10G-X722_VF", > + "ICE_100G-E810C_QSFP", > + "ICE_25G-E810C_SFP", > + "ICE_25G-E810_XXV_SFP", > + "IGB-I350_VF", > + "IGB_1G-82540EM", > + "IGB_1G-82545EM_COPPER", > + "IGB_1G-82571EB_COPPER", > + "IGB_1G-82574L", > + "IGB_1G-82576", > + "IGB_1G-82576_QUAD_COPPER", > + "IGB_1G-82576_QUAD_COPPER_ET2", > + "IGB_1G-82580_COPPER", > + "IGB_1G-I210_COPPER", > + "IGB_1G-I350_COPPER", > + "IGB_1G-I354_SGMII", > + "IGB_1G-PCH_LPTLP_I218_LM", > + "IGB_1G-PCH_LPTLP_I218_V", > + "IGB_1G-PCH_LPT_I217_LM", > + "IGB_1G-PCH_LPT_I217_V", > + "IGB_2.5G-I354_BACKPLANE_2_5GBPS", > + "IGC-I225_LM", > + "IGC-I226_LM", > + "IXGBE_10G-82599_SFP", > + "IXGBE_10G-82599_SFP_SF_QP", > + "IXGBE_10G-82599_T3_LOM", > + "IXGBE_10G-82599_VF", > + "IXGBE_10G-X540T", > + "IXGBE_10G-X540_VF", > + "IXGBE_10G-X550EM_A_SFP", > + "IXGBE_10G-X550EM_X_10G_T", > + "IXGBE_10G-X550EM_X_SFP", > + "IXGBE_10G-X550EM_X_VF", > + "IXGBE_10G-X550T", > + "IXGBE_10G-X550_VF", > + "brcm_57414", > + "brcm_P2100G", > + "cavium_0011", > + "cavium_a034", > + "cavium_a063", > + "cavium_a064", > + "fastlinq_ql41000", > + "fastlinq_ql41000_vf", > + "fastlinq_ql45000", > + "fastlinq_ql45000_vf", > + "hi1822", > + "virtio" > + ] > + }, > + > "ARCH": { > "type": "string", > "enum": [ > @@ -94,6 +164,19 @@ > "amount" > ] > }, > + "pci_address": { > + "type": "string", > + "pattern": > "^[\\da-fA-F]{4}:[\\da-fA-F]{2}:[\\da-fA-F]{2}.\\d:?\\w*$" > + }, > + "port_peer_address": { > + "description": "Peer is a TRex port, and IXIA port or a PCI > address", > + "oneOf": [ > + { > + "description": "PCI peer port", > + "$ref": "#/definitions/pci_address" > + } > + ] > + }, > "test_suite": { > "type": "string", > "enum": [ > @@ -165,6 +248,44 @@ > }, > "hugepages": { > "$ref": "#/definitions/hugepages" > + }, > + "ports": { > + "type": "array", > + "items": { > + "type": "object", > + "description": "Each port should be described on both sides > of the connection. This makes configuration slightly more verbose but > greatly simplifies implementation. If there are an inconsistencies, then > DTS will not run until that issue is fixed. An example inconsistency would > be port 1, node 1 says it is connected to port 1, node 2, but port 1, node > 2 says it is connected to port 2, node 1.", > + "properties": { > + "pci": { > + "$ref": "#/definitions/pci_address", > + "description": "The local PCI address of the port" > + }, > + "os_driver_for_dpdk": { > + "type": "string", > + "description": "The driver that the kernel should bind > this device to for DPDK to use it. (ex: vfio-pci)" > + }, > + "os_driver": { > + "type": "string", > + "description": "The driver normally used by this port > (ex: i40e)" > + }, > + "peer_node": { > + "type": "string", > + "description": "The name of the node the peer port is > on" > + }, > + "peer_pci": { > + "$ref": "#/definitions/pci_address", > + "description": "The PCI address of the peer port" > + } > + }, > + "additionalProperties": false, > + "required": [ > + "pci", > + "os_driver_for_dpdk", > + "os_driver", > + "peer_node", > + "peer_pci" > + ] > + }, > + "minimum": 1 > } > }, > "additionalProperties": false, > @@ -211,8 +332,27 @@ > ] > } > }, > + "skip_smoke_tests": { > + "description": "Optional field that allows you to skip smoke > testing", > + "type": "boolean" > + }, > "system_under_test": { > - "$ref": "#/definitions/node_name" > + "type":"object", > + "properties": { > + "node_name": { > + "$ref": "#/definitions/node_name" > + }, > + "vdevs": { > + "description": "Opentional list of names of vdevs to be > used in execution", > + "type": "array", > + "items": { > + "type": "string" > + } > + } > + }, > + "required": [ > + "node_name" > + ] > } > }, > "additionalProperties": false, > diff --git a/dts/framework/dts.py b/dts/framework/dts.py > index 05022845..7b09d8fb 100644 > --- a/dts/framework/dts.py > +++ b/dts/framework/dts.py > @@ -5,7 +5,13 @@ > > import sys > > -from .config import CONFIGURATION, BuildTargetConfiguration, > ExecutionConfiguration > +from .config import ( > + CONFIGURATION, > + BuildTargetConfiguration, > + ExecutionConfiguration, > + TestSuiteConfig, > +) > +from .exception import BlockingTestSuiteError > from .logger import DTSLOG, getLogger > from .test_result import BuildTargetResult, DTSResult, ExecutionResult, > Result > from .test_suite import get_test_suites > @@ -82,7 +88,7 @@ def _run_execution( > running all build targets in the given execution. > """ > dts_logger.info(f"Running execution with SUT '{ > execution.system_under_test.name}'.") > - execution_result = result.add_execution(sut_node.config) > + execution_result = result.add_execution(sut_node.config, > sut_node.node_info) > > try: > sut_node.set_up_execution(execution) > @@ -118,14 +124,15 @@ def _run_build_target( > > try: > sut_node.set_up_build_target(build_target) > - result.dpdk_version = sut_node.dpdk_version > + # result.dpdk_version = sut_node.dpdk_version > + > build_target_result.add_build_target_versions(sut_node.get_build_target_info()) > build_target_result.update_setup(Result.PASS) > except Exception as e: > dts_logger.exception("Build target setup failed.") > build_target_result.update_setup(Result.FAIL, e) > > else: > - _run_suites(sut_node, execution, build_target_result) > + _run_all_suites(sut_node, execution, build_target_result) > > finally: > try: > @@ -136,7 +143,7 @@ def _run_build_target( > build_target_result.update_teardown(Result.FAIL, e) > > > -def _run_suites( > +def _run_all_suites( > sut_node: SutNode, > execution: ExecutionConfiguration, > build_target_result: BuildTargetResult, > @@ -146,27 +153,61 @@ def _run_suites( > with possibly only a subset of test cases. > If no subset is specified, run all test cases. > """ > + end_build_target = False > + if not execution.skip_smoke_tests: > + execution.test_suites[:0] = > [TestSuiteConfig.from_dict("smoke_tests")] > for test_suite_config in execution.test_suites: > try: > - full_suite_path = > f"tests.TestSuite_{test_suite_config.test_suite}" > - test_suite_classes = get_test_suites(full_suite_path) > - suites_str = ", ".join((x.__name__ for x in > test_suite_classes)) > - dts_logger.debug( > - f"Found test suites '{suites_str}' in > '{full_suite_path}'." > + _run_single_suite( > + sut_node, execution, build_target_result, > test_suite_config > ) > - except Exception as e: > - dts_logger.exception("An error occurred when searching for > test suites.") > - result.update_setup(Result.ERROR, e) > - > - else: > - for test_suite_class in test_suite_classes: > - test_suite = test_suite_class( > - sut_node, > - test_suite_config.test_cases, > - execution.func, > - build_target_result, > - ) > - test_suite.run() > + except BlockingTestSuiteError as e: > + dts_logger.exception( > + f"An error occurred within > {test_suite_config.test_suite}. " > + "Skipping build target..." > + ) > + result.add_error(e) > + end_build_target = True > + # if a blocking test failed and we need to bail out of suite > executions > + if end_build_target: > + break > + > + > +def _run_single_suite( > + sut_node: SutNode, > + execution: ExecutionConfiguration, > + build_target_result: BuildTargetResult, > + test_suite_config: TestSuiteConfig, > +) -> None: > + """Runs a single test suite. > + > + Args: > + sut_node: Node to run tests on. > + execution: Execution the test case belongs to. > + build_target_result: Build target configuration test case is run > on > + test_suite_config: Test suite configuration > + > + Raises: > + BlockingTestSuiteError: If a test suite that was marked as > blocking fails. > + """ > + try: > + full_suite_path = > f"tests.TestSuite_{test_suite_config.test_suite}" > + test_suite_classes = get_test_suites(full_suite_path) > + suites_str = ", ".join((x.__name__ for x in test_suite_classes)) > + dts_logger.debug(f"Found test suites '{suites_str}' in > '{full_suite_path}'.") > + except Exception as e: > + dts_logger.exception("An error occurred when searching for test > suites.") > + result.update_setup(Result.ERROR, e) > + > + else: > + for test_suite_class in test_suite_classes: > + test_suite = test_suite_class( > + sut_node, > + test_suite_config.test_cases, > + execution.func, > + build_target_result, > + ) > + test_suite.run() > > > def _exit_dts() -> None: > diff --git a/dts/framework/exception.py b/dts/framework/exception.py > index ca353d98..dfb12df4 100644 > --- a/dts/framework/exception.py > +++ b/dts/framework/exception.py > @@ -25,6 +25,7 @@ class ErrorSeverity(IntEnum): > SSH_ERR = 4 > DPDK_BUILD_ERR = 10 > TESTCASE_VERIFY_ERR = 20 > + BLOCKING_TESTSUITE_ERR = 25 > > > class DTSError(Exception): > @@ -144,3 +145,14 @@ def __init__(self, value: str): > > def __str__(self) -> str: > return repr(self.value) > + > + > +class BlockingTestSuiteError(DTSError): > + suite_name: str > + severity: ClassVar[ErrorSeverity] = > ErrorSeverity.BLOCKING_TESTSUITE_ERR > + > + def __init__(self, suite_name: str) -> None: > + self.suite_name = suite_name > + > + def __str__(self) -> str: > + return f"Blocking suite {self.suite_name} failed." > diff --git a/dts/framework/remote_session/__init__.py > b/dts/framework/remote_session/__init__.py > index ee221503..2c408c25 100644 > --- a/dts/framework/remote_session/__init__.py > +++ b/dts/framework/remote_session/__init__.py > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: BSD-3-Clause > # Copyright(c) 2023 PANTHEON.tech s.r.o. > +# Copyright(c) 2023 University of New Hampshire > > """ > The package provides modules for managing remote connections to a remote > host (node), > @@ -17,7 +18,15 @@ > > from .linux_session import LinuxSession > from .os_session import OSSession > -from .remote import CommandResult, RemoteSession, SSHSession > +from .remote import ( > + CommandResult, > + InteractiveRemoteSession, > + InteractiveShell, > + RemoteSession, > + SSHSession, > + TestPmdDevice, > + TestPmdShell, > +) > > > def create_session( > diff --git a/dts/framework/remote_session/os_session.py > b/dts/framework/remote_session/os_session.py > index 4c48ae25..48f05c44 100644 > --- a/dts/framework/remote_session/os_session.py > +++ b/dts/framework/remote_session/os_session.py > @@ -5,14 +5,22 @@ > from abc import ABC, abstractmethod > from collections.abc import Iterable > from pathlib import PurePath > +from typing import Union > > -from framework.config import Architecture, NodeConfiguration > +from framework.config import Architecture, InteractiveApp, > NodeConfiguration, NodeInfo > from framework.logger import DTSLOG > +from framework.remote_session.remote import InteractiveShell, TestPmdShell > from framework.settings import SETTINGS > from framework.testbed_model import LogicalCore > from framework.utils import EnvVarsDict, MesonArgs > > -from .remote import CommandResult, RemoteSession, create_remote_session > +from .remote import ( > + CommandResult, > + InteractiveRemoteSession, > + RemoteSession, > + create_interactive_session, > + create_remote_session, > +) > > > class OSSession(ABC): > @@ -26,6 +34,7 @@ class OSSession(ABC): > name: str > _logger: DTSLOG > remote_session: RemoteSession > + interactive_session: InteractiveRemoteSession > > def __init__( > self, > @@ -37,6 +46,7 @@ def __init__( > self.name = name > self._logger = logger > self.remote_session = create_remote_session(node_config, name, > logger) > + self.interactive_session = > create_interactive_session(node_config, name, logger) > > def close(self, force: bool = False) -> None: > """ > @@ -64,6 +74,33 @@ def send_command( > """ > return self.remote_session.send_command(command, timeout, verify, > env) > > + def create_interactive_shell( > + self, > + shell_type: InteractiveApp, > + path_to_app: PurePath, > + eal_parameters: str, > + timeout: float, > + ) -> Union[InteractiveShell, TestPmdShell]: > + """ > + See "create_interactive_shell" in SutNode > + """ > + match (shell_type): > + case InteractiveApp.testpmd: > + return TestPmdShell( > + self.interactive_session.session, > + self._logger, > + path_to_app, > + timeout=timeout, > + eal_flags=eal_parameters, > + ) > + case _: > + self._logger.info( > + f"Unhandled app type {shell_type.name}, defaulting > to shell." > + ) > + return InteractiveShell( > + self.interactive_session.session, self._logger, > path_to_app, timeout > + ) > + > @abstractmethod > def guess_dpdk_remote_dir(self, remote_dir) -> PurePath: > """ > @@ -173,3 +210,15 @@ def setup_hugepages(self, hugepage_amount: int, > force_first_numa: bool) -> None: > if needed and mount the hugepages if needed. > If force_first_numa is True, configure hugepages just on the > first socket. > """ > + > + @abstractmethod > + def get_compiler_version(self, compiler_name: str) -> str: > + """ > + Get installed version of compiler used for DPDK > + """ > + > + @abstractmethod > + def get_node_info(self) -> NodeInfo: > + """ > + Collect information about the node > + """ > diff --git a/dts/framework/remote_session/posix_session.py > b/dts/framework/remote_session/posix_session.py > index d38062e8..4e419877 100644 > --- a/dts/framework/remote_session/posix_session.py > +++ b/dts/framework/remote_session/posix_session.py > @@ -6,7 +6,7 @@ > from collections.abc import Iterable > from pathlib import PurePath, PurePosixPath > > -from framework.config import Architecture > +from framework.config import Architecture, NodeInfo > from framework.exception import DPDKBuildError, > RemoteCommandExecutionError > from framework.settings import SETTINGS > from framework.utils import EnvVarsDict, MesonArgs > @@ -219,3 +219,30 @@ def _remove_dpdk_runtime_dirs( > > def get_dpdk_file_prefix(self, dpdk_prefix) -> str: > return "" > + > + def get_compiler_version(self, compiler_name: str) -> str: > + match compiler_name: > + case "gcc": > + return self.send_command( > + f"{compiler_name} --version", SETTINGS.timeout > + ).stdout.split("\n")[0] > + case "clang": > + return self.send_command( > + f"{compiler_name} --version", SETTINGS.timeout > + ).stdout.split("\n")[0] > + case "msvc": > + return self.send_command("cl", SETTINGS.timeout).stdout > + case "icc": > + return self.send_command(f"{compiler_name} -V", > SETTINGS.timeout).stdout > + case _: > + raise ValueError(f"Unknown compiler {compiler_name}") > + > + def get_node_info(self) -> NodeInfo: > + os_release_info = self.send_command( > + "awk -F= '$1 ~ /^NAME$|^VERSION$/ {print $2}' > /etc/os-release", > + SETTINGS.timeout, > + ).stdout.split("\n") > + kernel_version = self.send_command("uname -r", > SETTINGS.timeout).stdout > + return NodeInfo( > + os_release_info[0].strip(), os_release_info[1].strip(), > kernel_version > + ) > diff --git a/dts/framework/remote_session/remote/__init__.py > b/dts/framework/remote_session/remote/__init__.py > index 8a151221..03fd309f 100644 > --- a/dts/framework/remote_session/remote/__init__.py > +++ b/dts/framework/remote_session/remote/__init__.py > @@ -1,16 +1,26 @@ > # SPDX-License-Identifier: BSD-3-Clause > # Copyright(c) 2023 PANTHEON.tech s.r.o. > +# Copyright(c) 2023 University of New Hampshire > > # pylama:ignore=W0611 > > from framework.config import NodeConfiguration > from framework.logger import DTSLOG > > +from .interactive_remote_session import InteractiveRemoteSession > +from .interactive_shell import InteractiveShell > from .remote_session import CommandResult, RemoteSession > from .ssh_session import SSHSession > +from .testpmd_shell import TestPmdDevice, TestPmdShell > > > def create_remote_session( > node_config: NodeConfiguration, name: str, logger: DTSLOG > ) -> RemoteSession: > return SSHSession(node_config, name, logger) > + > + > +def create_interactive_session( > + node_config: NodeConfiguration, name: str, logger: DTSLOG > +) -> InteractiveRemoteSession: > + return InteractiveRemoteSession(node_config, logger) > diff --git > a/dts/framework/remote_session/remote/interactive_remote_session.py > b/dts/framework/remote_session/remote/interactive_remote_session.py > new file mode 100644 > index 00000000..2d94daf2 > --- /dev/null > +++ b/dts/framework/remote_session/remote/interactive_remote_session.py > @@ -0,0 +1,82 @@ > +# SPDX-License-Identifier: BSD-3-Clause > +# Copyright(c) 2023 University of New Hampshire > + > +import socket > +import traceback > + > +from paramiko import AutoAddPolicy, SSHClient, Transport # type: ignore > +from paramiko.ssh_exception import ( # type: ignore > + AuthenticationException, > + BadHostKeyException, > + NoValidConnectionsError, > + SSHException, > +) > + > +from framework.config import NodeConfiguration > +from framework.exception import SSHConnectionError > +from framework.logger import DTSLOG > + > + > +class InteractiveRemoteSession: > + hostname: str > + ip: str > + port: int > + username: str > + password: str > + _logger: DTSLOG > + _node_config: NodeConfiguration > + session: SSHClient > + _transport: Transport | None > + > + def __init__(self, node_config: NodeConfiguration, _logger: DTSLOG) > -> None: > + self._node_config = node_config > + self._logger = _logger > + self.hostname = node_config.hostname > + self.username = node_config.user > + self.password = node_config.password if node_config.password else > "" > + port = "22" > + self.ip = node_config.hostname > + if ":" in node_config.hostname: > + self.ip, port = node_config.hostname.split(":") > + self.port = int(port) > + self._logger.info( > + f"Initializing interactive connection for {self.username}@ > {self.hostname}" > + ) > + self._connect() > + self._logger.info( > + f"Interactive connection successful for {self.username}@ > {self.hostname}" > + ) > + > + def _connect(self) -> None: > + client = SSHClient() > + client.set_missing_host_key_policy(AutoAddPolicy) > + self.session = client > + retry_attempts = 10 > + for retry_attempt in range(retry_attempts): > + try: > + client.connect( > + self.ip, > + username=self.username, > + port=self.port, > + password=self.password, > + timeout=20 if self.port else 10, > + ) > + except (TypeError, BadHostKeyException, > AuthenticationException) as e: > + self._logger.exception(e) > + raise SSHConnectionError(self.hostname) from e > + except (NoValidConnectionsError, socket.error, SSHException) > as e: > + self._logger.debug(traceback.format_exc()) > + self._logger.warning(e) > + self._logger.info( > + "Retrying interactive session connection: " > + f"retry number {retry_attempt +1}" > + ) > + else: > + break > + else: > + raise SSHConnectionError(self.hostname) > + # Interactive sessions are used on an "as needed" basis so we have > + # to set a keepalive > + self._transport = self.session.get_transport() > + if self._transport is not None: > + self._transport.set_keepalive(30) > diff --git a/dts/framework/remote_session/remote/interactive_shell.py > b/dts/framework/remote_session/remote/interactive_shell.py > new file mode 100644 > index 00000000..0cb0f7b4 > --- /dev/null > +++ b/dts/framework/remote_session/remote/interactive_shell.py > @@ -0,0 +1,75 @@ > +from pathlib import PurePath > + > +from paramiko import Channel, SSHClient, channel # type: ignore > + > +from framework.logger import DTSLOG > +from framework.settings import SETTINGS > + > + > +class InteractiveShell: > + > + _interactive_session: SSHClient > + _stdin: channel.ChannelStdinFile > + _stdout: channel.ChannelFile > + _ssh_channel: Channel > + _logger: DTSLOG > + _timeout: float > + _path_to_app: PurePath > + > + def __init__( > + self, > + interactive_session: SSHClient, > + logger: DTSLOG, > + path_to_app: PurePath, > + timeout: float = SETTINGS.timeout, > + ) -> None: > + self._interactive_session = interactive_session > + self._ssh_channel = self._interactive_session.invoke_shell() > + self._stdin = self._ssh_channel.makefile_stdin("w") > + self._stdout = self._ssh_channel.makefile("r") > + self._ssh_channel.settimeout(timeout) > + self._ssh_channel.set_combine_stderr(True) # combines stdout and > stderr streams > + self._logger = logger > + self._timeout = timeout > + self._path_to_app = path_to_app > + self._start_application() > + > + def _start_application(self) -> None: > + """Starts a new interactive application based on _path_to_app. > + > + This method is often overridden by subclasses as their process for > + starting may look different. > + """ > + self.send_command_get_output(f"{self._path_to_app}", "") > + > + def send_command_get_output(self, command: str, prompt: str) -> str: > + """Send a command and get all output before the expected ending > string. > + > + Lines that expect input are not included in the stdout buffer so > they cannot be > + used for expect. For example, if you were prompted to log into > something > + with a username and password, you cannot expect "username:" > because it won't > + yet be in the stdout buffer. A work around for this could be > consuming an > + extra newline character to force the current prompt into the > stdout buffer. > + > + Returns: > + All output in the buffer before expected string > + """ > + self._logger.info(f"Sending command {command.strip()}...") > + self._stdin.write(f"{command}\n") > + self._stdin.flush() > + out: str = "" > + for line in self._stdout: > + out += line > + if prompt in line and not line.rstrip().endswith( > + command.rstrip() > + ): # ignore line that sent command > + break > + self._logger.debug(f"Got output: {out}") > + return out > + > + def close(self) -> None: > + self._stdin.close() > + self._ssh_channel.close() > + > + def __del__(self) -> None: > + self.close() > diff --git a/dts/framework/remote_session/remote/testpmd_shell.py > b/dts/framework/remote_session/remote/testpmd_shell.py > new file mode 100644 > index 00000000..31c25258 > --- /dev/null > +++ b/dts/framework/remote_session/remote/testpmd_shell.py > @@ -0,0 +1,75 @@ > +# SPDX-License-Identifier: BSD-3-Clause > +# Copyright(c) 2023 University of New Hampshire > + > + > +from pathlib import PurePath > + > +from paramiko import SSHClient # type: ignore > + > +from framework.logger import DTSLOG > +from framework.settings import SETTINGS > + > +from .interactive_shell import InteractiveShell > + > + > +class TestPmdDevice(object): > + pci_address: str > + > + def __init__(self, pci_address: str): > + self.pci_address = pci_address > + > + def __str__(self) -> str: > + return self.pci_address > + > + > +class TestPmdShell(InteractiveShell): > + expected_prompt: str = "testpmd>" > + _eal_flags: str > + > + def __init__( > + self, > + interactive_session: SSHClient, > + logger: DTSLOG, > + path_to_testpmd: PurePath, > + eal_flags: str, > + timeout: float = SETTINGS.timeout, > + ) -> None: > + """Initializes an interactive testpmd session using specified > parameters.""" > + self._eal_flags = eal_flags > + > + super(TestPmdShell, self).__init__( > + interactive_session, > + logger=logger, > + path_to_app=path_to_testpmd, > + timeout=timeout, > + ) > + > + def _start_application(self) -> None: > + """Starts a new interactive testpmd shell using _path_to_app.""" > + self.send_command( > + f"{self._path_to_app} {self._eal_flags} -- -i", > + ) > + > + def send_command(self, command: str, prompt: str = expected_prompt) > -> str: > + """Specific way of handling the command for testpmd > + > + An extra newline character is consumed in order to force the > current line into > + the stdout buffer. > + """ > + return self.send_command_get_output(f"{command}\n", prompt) > + > + def get_devices(self) -> list[TestPmdDevice]: > + """Get a list of device names that are known to testpmd > + > + Uses the device info listed in testpmd and then parses the output > to > + return only the names of the devices. > + > + Returns: > + A list of strings representing device names (e.g. > 0000:14:00.1) > + """ > + dev_info: str = self.send_command("show device info all") > + dev_list: list[TestPmdDevice] = [] > + for line in dev_info.split("\n"): > + if "device name:" in line.lower(): > + dev_list.append(TestPmdDevice(line.strip().split(": > ")[1].strip())) > + return dev_list > diff --git a/dts/framework/test_result.py b/dts/framework/test_result.py > index 74391982..fe199467 100644 > --- a/dts/framework/test_result.py > +++ b/dts/framework/test_result.py > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: BSD-3-Clause > # Copyright(c) 2023 PANTHEON.tech s.r.o. > +# Copyright(c) 2023 University of New Hampshire > > """ > Generic result container and reporters > @@ -13,9 +14,11 @@ > OS, > Architecture, > BuildTargetConfiguration, > + BuildTargetInfo, > Compiler, > CPUType, > NodeConfiguration, > + NodeInfo, > ) > from .exception import DTSError, ErrorSeverity > from .logger import DTSLOG > @@ -67,12 +70,14 @@ class Statistics(dict): > Using a dict provides a convenient way to format the data. > """ > > - def __init__(self, dpdk_version): > + def __init__(self, output_info: dict[str, str] | None): > super(Statistics, self).__init__() > for result in Result: > self[result.name] = 0 > self["PASS RATE"] = 0.0 > - self["DPDK VERSION"] = dpdk_version > + if output_info: > + for info_key, info_val in output_info.items(): > + self[info_key] = info_val > > def __iadd__(self, other: Result) -> "Statistics": > """ > @@ -206,6 +211,8 @@ class BuildTargetResult(BaseResult): > os: OS > cpu: CPUType > compiler: Compiler > + compiler_version: str | None > + dpdk_version: str | None > > def __init__(self, build_target: BuildTargetConfiguration): > super(BuildTargetResult, self).__init__() > @@ -213,6 +220,12 @@ def __init__(self, build_target: > BuildTargetConfiguration): > self.os = build_target.os > self.cpu = build_target.cpu > self.compiler = build_target.compiler > + self.compiler_version = None > + self.dpdk_version = None > + > + def add_build_target_versions(self, versions: BuildTargetInfo) -> > None: > + self.compiler_version = versions.compiler_version > + self.dpdk_version = versions.dpdk_version > > def add_test_suite(self, test_suite_name: str) -> TestSuiteResult: > test_suite_result = TestSuiteResult(test_suite_name) > @@ -228,10 +241,17 @@ class ExecutionResult(BaseResult): > """ > > sut_node: NodeConfiguration > + sut_os_name: str > + sut_os_version: str > + sut_kernel_version: str > > - def __init__(self, sut_node: NodeConfiguration): > + def __init__(self, sut_node: NodeConfiguration, sut_version_info: > NodeInfo): > super(ExecutionResult, self).__init__() > self.sut_node = sut_node > + self.sut_version_info = sut_version_info > + self.sut_os_name = sut_version_info.os_name > + self.sut_os_version = sut_version_info.os_version > + self.sut_kernel_version = sut_version_info.kernel_version > > def add_build_target( > self, build_target: BuildTargetConfiguration > @@ -258,6 +278,7 @@ class DTSResult(BaseResult): > """ > > dpdk_version: str | None > + output: dict | None > _logger: DTSLOG > _errors: list[Exception] > _return_code: ErrorSeverity > @@ -267,14 +288,17 @@ class DTSResult(BaseResult): > def __init__(self, logger: DTSLOG): > super(DTSResult, self).__init__() > self.dpdk_version = None > + self.output = None > self._logger = logger > self._errors = [] > self._return_code = ErrorSeverity.NO_ERR > self._stats_result = None > self._stats_filename = os.path.join(SETTINGS.output_dir, > "statistics.txt") > > - def add_execution(self, sut_node: NodeConfiguration) -> > ExecutionResult: > - execution_result = ExecutionResult(sut_node) > + def add_execution( > + self, sut_node: NodeConfiguration, sut_version_info: NodeInfo > + ) -> ExecutionResult: > + execution_result = ExecutionResult(sut_node, sut_version_info) > self._inner_results.append(execution_result) > return execution_result > > @@ -296,7 +320,8 @@ def process(self) -> None: > for error in self._errors: > self._logger.debug(repr(error)) > > - self._stats_result = Statistics(self.dpdk_version) > + self._stats_result = Statistics(self.output) > + # add information gathered from the smoke tests to the statistics > self.add_stats(self._stats_result) > with open(self._stats_filename, "w+") as stats_file: > stats_file.write(str(self._stats_result)) > diff --git a/dts/framework/test_suite.py b/dts/framework/test_suite.py > index 0705f38f..de94c933 100644 > --- a/dts/framework/test_suite.py > +++ b/dts/framework/test_suite.py > @@ -11,7 +11,12 @@ > import re > from types import MethodType > > -from .exception import ConfigurationError, SSHTimeoutError, > TestCaseVerifyError > +from .exception import ( > + BlockingTestSuiteError, > + ConfigurationError, > + SSHTimeoutError, > + TestCaseVerifyError, > +) > from .logger import DTSLOG, getLogger > from .settings import SETTINGS > from .test_result import BuildTargetResult, Result, TestCaseResult, > TestSuiteResult > @@ -37,6 +42,7 @@ class TestSuite(object): > """ > > sut_node: SutNode > + is_blocking = False > _logger: DTSLOG > _test_cases_to_run: list[str] > _func: bool > @@ -118,6 +124,8 @@ def run(self) -> None: > f"the next test suite may be affected." > ) > self._result.update_setup(Result.ERROR, e) > + if len(self._result.get_errors()) > 0 and self.is_blocking: > + raise BlockingTestSuiteError(test_suite_name) > > def _execute_test_suite(self) -> None: > """ > diff --git a/dts/framework/testbed_model/node.py > b/dts/framework/testbed_model/node.py > index d48fafe6..c5147e0e 100644 > --- a/dts/framework/testbed_model/node.py > +++ b/dts/framework/testbed_model/node.py > @@ -40,6 +40,7 @@ class Node(object): > lcores: list[LogicalCore] > _logger: DTSLOG > _other_sessions: list[OSSession] > + _execution_config: ExecutionConfiguration > > def __init__(self, node_config: NodeConfiguration): > self.config = node_config > @@ -64,6 +65,7 @@ def set_up_execution(self, execution_config: > ExecutionConfiguration) -> None: > """ > self._setup_hugepages() > self._set_up_execution(execution_config) > + self._execution_config = execution_config > > def _set_up_execution(self, execution_config: ExecutionConfiguration) > -> None: > """ > diff --git a/dts/framework/testbed_model/sut_node.py > b/dts/framework/testbed_model/sut_node.py > index 2b2b50d9..6783e0b8 100644 > --- a/dts/framework/testbed_model/sut_node.py > +++ b/dts/framework/testbed_model/sut_node.py > @@ -1,14 +1,27 @@ > # SPDX-License-Identifier: BSD-3-Clause > # Copyright(c) 2010-2014 Intel Corporation > # Copyright(c) 2023 PANTHEON.tech s.r.o. > +# Copyright(c) 2023 University of New Hampshire > > import os > import tarfile > import time > from pathlib import PurePath > - > -from framework.config import BuildTargetConfiguration, NodeConfiguration > -from framework.remote_session import CommandResult, OSSession > +from typing import Union > + > +from framework.config import ( > + BuildTargetConfiguration, > + BuildTargetInfo, > + InteractiveApp, > + NodeConfiguration, > + NodeInfo, > +) > +from framework.remote_session import ( > + CommandResult, > + InteractiveShell, > + OSSession, > + TestPmdShell, > +) > from framework.settings import SETTINGS > from framework.utils import EnvVarsDict, MesonArgs > > @@ -16,6 +29,52 @@ > from .node import Node > > > +class EalParameters(object): > + def __init__( > + self, > + lcore_list: LogicalCoreList, > + memory_channels: int, > + prefix: str, > + no_pci: bool, > + vdevs: list[VirtualDevice], > + other_eal_param: str, > + ): > + """ > + Generate eal parameters character string; > + :param lcore_list: the list of logical cores to use. > + :param memory_channels: the number of memory channels to use. > + :param prefix: set file prefix string, eg: > + prefix='vf' > + :param no_pci: switch of disable PCI bus eg: > + no_pci=True > + :param vdevs: virtual device list, eg: > + vdevs=[ > + VirtualDevice('net_ring0'), > + VirtualDevice('net_ring1') > + ] > + :param other_eal_param: user defined DPDK eal parameters, eg: > + other_eal_param='--single-file-segments' > + """ > + self._lcore_list = f"-l {lcore_list}" > + self._memory_channels = f"-n {memory_channels}" > + self._prefix = prefix > + if prefix: > + self._prefix = f"--file-prefix={prefix}" > + self._no_pci = "--no-pci" if no_pci else "" > + self._vdevs = " ".join(f"--vdev {vdev}" for vdev in vdevs) > + self._other_eal_param = other_eal_param > + > + def __str__(self) -> str: > + return ( > + f"{self._lcore_list} " > + f"{self._memory_channels} " > + f"{self._prefix} " > + f"{self._no_pci} " > + f"{self._vdevs} " > + f"{self._other_eal_param}" > + ) > + > + > class SutNode(Node): > """ > A class for managing connections to the System under Test, providing > @@ -30,9 +89,11 @@ class SutNode(Node): > _env_vars: EnvVarsDict > _remote_tmp_dir: PurePath > __remote_dpdk_dir: PurePath | None > - _dpdk_version: str | None > _app_compile_timeout: float > _dpdk_kill_session: OSSession | None > + _dpdk_version: str | None > + _node_info: NodeInfo | None > + _compiler_version: str | None > > def __init__(self, node_config: NodeConfiguration): > super(SutNode, self).__init__(node_config) > @@ -41,12 +102,14 @@ def __init__(self, node_config: NodeConfiguration): > self._env_vars = EnvVarsDict() > self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() > self.__remote_dpdk_dir = None > - self._dpdk_version = None > self._app_compile_timeout = 90 > self._dpdk_kill_session = None > self._dpdk_timestamp = ( > f"{str(os.getpid())}_{time.strftime('%Y%m%d%H%M%S', > time.localtime())}" > ) > + self._dpdk_version = None > + self._node_info = None > + self._compiler_version = None > > @property > def _remote_dpdk_dir(self) -> PurePath: > @@ -75,6 +138,32 @@ def dpdk_version(self) -> str: > ) > return self._dpdk_version > > + @property > + def node_info(self) -> NodeInfo: > + if self._node_info is None: > + self._node_info = self.main_session.get_node_info() > + return self._node_info > + > + @property > + def compiler_version(self) -> str: > + if self._compiler_version is None: > + if self._build_target_config is not None: > + self._compiler_version = > self.main_session.get_compiler_version( > + self._build_target_config.compiler.name > + ) > + else: > + self._logger.warning( > + "Failed to get compiler version because" > + "_build_target_config is None." > + ) > + return "" > + return self._compiler_version > + > + def get_build_target_info(self) -> BuildTargetInfo: > + return BuildTargetInfo( > + dpdk_version=self.dpdk_version, > compiler_version=self.compiler_version > + ) > + > def _guess_dpdk_remote_dir(self) -> PurePath: > return > self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir) > > @@ -84,6 +173,10 @@ def _set_up_build_target( > """ > Setup DPDK on the SUT node. > """ > + # we want to ensure that dpdk_version and compiler_version is > reset for new > + # build targets > + self._dpdk_version = None > + self._compiler_version = None > self._configure_build_target(build_target_config) > self._copy_dpdk_tarball() > self._build_dpdk() > @@ -262,48 +355,37 @@ def run_dpdk_app( > f"{app_path} {eal_args}", timeout, verify=True > ) > > - > -class EalParameters(object): > - def __init__( > + def create_interactive_shell( > self, > - lcore_list: LogicalCoreList, > - memory_channels: int, > - prefix: str, > - no_pci: bool, > - vdevs: list[VirtualDevice], > - other_eal_param: str, > - ): > + shell_type: InteractiveApp, > + timeout: float = SETTINGS.timeout, > + eal_parameters: EalParameters | None = None, > + ) -> Union[InteractiveShell, TestPmdShell]: > + """Create a handler for an interactive session. > + > + This method is a factory that calls a method in OSSession to > create shells for > + different DPDK applications. > + > + Args: > + shell_type: Enum value representing the desired application. > + timeout: Timeout for reading output from the SSH channel. If > you are > + reading from the buffer and don't receive any data within > the timeout > + it will throw an error. > + eal_parameters: List of EAL parameters to use to launch the > app. If this > + isn't provided, it will default to calling > create_eal_parameters(). > + This is ignored for base "shell" types. > + Returns: > + Instance of the desired interactive application. > """ > - Generate eal parameters character string; > - :param lcore_list: the list of logical cores to use. > - :param memory_channels: the number of memory channels to use. > - :param prefix: set file prefix string, eg: > - prefix='vf' > - :param no_pci: switch of disable PCI bus eg: > - no_pci=True > - :param vdevs: virtual device list, eg: > - vdevs=[ > - VirtualDevice('net_ring0'), > - VirtualDevice('net_ring1') > - ] > - :param other_eal_param: user defined DPDK eal parameters, eg: > - other_eal_param='--single-file-segments' > - """ > - self._lcore_list = f"-l {lcore_list}" > - self._memory_channels = f"-n {memory_channels}" > - self._prefix = prefix > - if prefix: > - self._prefix = f"--file-prefix={prefix}" > - self._no_pci = "--no-pci" if no_pci else "" > - self._vdevs = " ".join(f"--vdev {vdev}" for vdev in vdevs) > - self._other_eal_param = other_eal_param > - > - def __str__(self) -> str: > - return ( > - f"{self._lcore_list} " > - f"{self._memory_channels} " > - f"{self._prefix} " > - f"{self._no_pci} " > - f"{self._vdevs} " > - f"{self._other_eal_param}" > + if not eal_parameters: > + eal_parameters = self.create_eal_parameters() > + > + # We need to append the build directory for DPDK apps > + shell_type.path = > self.remote_dpdk_build_dir.joinpath(shell_type.path) > + default_path = self.main_session.join_remote_path(shell_type.path) > + return self.main_session.create_interactive_shell( > + shell_type, > + default_path, > + str(eal_parameters), > + timeout, > ) > diff --git a/dts/framework/utils.py b/dts/framework/utils.py > index 55e0b0ef..2ee67145 100644 > --- a/dts/framework/utils.py > +++ b/dts/framework/utils.py > @@ -5,6 +5,8 @@ > > import sys > > +REGEX_FOR_PCI_ADDRESS = > "/[0-9a-fA-F]{4}:[0-9a-fA-F]{2}:[0-9a-fA-F]{2}.[0-9]{1}/" > + > > def check_dts_python_version() -> None: > if sys.version_info.major < 3 or ( > diff --git a/dts/tests/TestSuite_smoke_tests.py > b/dts/tests/TestSuite_smoke_tests.py > new file mode 100644 > index 00000000..9cf54720 > --- /dev/null > +++ b/dts/tests/TestSuite_smoke_tests.py > @@ -0,0 +1,113 @@ > +# SPDX-License-Identifier: BSD-3-Clause > +# Copyright(c) 2023 University of New Hampshire > + > +import re > + > +from framework.config import InteractiveApp, PortConfig > +from framework.remote_session import TestPmdDevice, TestPmdShell > +from framework.settings import SETTINGS > +from framework.test_suite import TestSuite > +from framework.utils import REGEX_FOR_PCI_ADDRESS > + > + > +class SmokeTests(TestSuite): > + is_blocking = True > + # dicts in this list are expected to have two keys: > + # "pci_address" and "current_driver" > + nics_in_node: list[PortConfig] = [] > + > + def set_up_suite(self) -> None: > + """ > + Setup: > + Set the build directory path and generate a list of NICs in > the SUT node. > + """ > + self.dpdk_build_dir_path = self.sut_node.remote_dpdk_build_dir > + self.nics_in_node = self.sut_node.config.ports > + > + def test_unit_tests(self) -> None: > + """ > + Test: > + Run the fast-test unit-test suite through meson. > + """ > + self.sut_node.main_session.send_command( > + f"meson test -C {self.dpdk_build_dir_path} --suite > fast-tests", > + 300, > + verify=True, > + ) > + > + def test_driver_tests(self) -> None: > + """ > + Test: > + Run the driver-test unit-test suite through meson. > + """ > + list_of_vdevs = "" > + for dev in self.sut_node._execution_config.vdevs: > + list_of_vdevs += f"--vdev {dev} " > + list_of_vdevs = list_of_vdevs[:-1] > + if list_of_vdevs: > + self._logger.info( > + "Running driver tests with the following virtual " > + f"devices: {list_of_vdevs}" > + ) > + self.sut_node.main_session.send_command( > + f"meson test -C {self.dpdk_build_dir_path} --suite > driver-tests " > + f'--test-args "{list_of_vdevs}"', > + 300, > + verify=True, > + ) > + else: > + self.sut_node.main_session.send_command( > + f"meson test -C {self.dpdk_build_dir_path} --suite > driver-tests", > + 300, > + verify=True, > + ) > + > + def test_devices_listed_in_testpmd(self) -> None: > + """ > + Test: > + Uses testpmd driver to verify that devices have been found by > testpmd. > + """ > + testpmd_driver = > self.sut_node.create_interactive_shell(InteractiveApp.testpmd) > + # We know it should always be a TestPmdShell but mypy doesn't > + assert isinstance(testpmd_driver, TestPmdShell) > + dev_list: list[TestPmdDevice] = testpmd_driver.get_devices() > + for nic in self.nics_in_node: > + self.verify( > + nic.pci in map(str, dev_list), > + f"Device {nic.pci} was not listed in testpmd's available > devices, " > + "please check your configuration", > + ) > + > + def test_device_bound_to_driver(self) -> None: > + """ > + Test: > + Ensure that all drivers listed in the config are bound to the > correct driver. > + """ > + path_to_devbind = self.sut_node.main_session.join_remote_path( > + self.sut_node._remote_dpdk_dir, "usertools", "dpdk-devbind.py" > + ) > + > + all_nics_in_dpdk_devbind = > self.sut_node.main_session.send_command( > + f"{path_to_devbind} --status | awk '{REGEX_FOR_PCI_ADDRESS}'", > + SETTINGS.timeout, > + ).stdout > + > + for nic in self.nics_in_node: > + # This regular expression finds the line in the above string > that starts > + # with the address for the nic we are on in the loop and then > captures the > + # name of the driver in a group > + devbind_info_for_nic = re.search( > + f"{nic.pci}[^\\n]*drv=([\\d\\w]*) [^\\n]*", > + all_nics_in_dpdk_devbind, > + ) > + self.verify( > + devbind_info_for_nic is not None, > + f"Failed to find configured device ({nic.pci}) using > dpdk-devbind.py", > + ) > + # We know this isn't None, but mypy doesn't > + assert devbind_info_for_nic is not None > + self.verify( > + devbind_info_for_nic.group(1) == nic.os_driver, > + f"Driver for device {nic.pci} does not match driver > listed in " > + f"configuration (bound to > {devbind_info_for_nic.group(1)})", > + ) > -- > 2.41.0 > > [-- Attachment #2: Type: text/html, Size: 76054 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v5 1/2] dts: add smoke tests 2023-07-12 20:00 ` Jeremy Spewock @ 2023-07-13 5:46 ` Juraj Linkeš 0 siblings, 0 replies; 5+ messages in thread From: Juraj Linkeš @ 2023-07-13 5:46 UTC (permalink / raw) To: Jeremy Spewock Cc: Honnappa.Nagarahalli, thomas, lijuan.tu, wathsala.vithanage, probb, dev On Wed, Jul 12, 2023 at 10:00 PM Jeremy Spewock <jspewock@iol.unh.edu> wrote: > > This fails to apply because it modifies some of the same files that the previous DTS patches that were applied today also change. These changes only modify things in dts/ which isn't currently being used in CI testing so there wouldn't be any breaking changes for these builds regardless. Apologies for my lack of knowledge on how this is handled, but are these conflicts something that I need to fix in my patch or are instead handled by maintainers who are applying and merging the patches on these release candidates? > Send a new version if you have the bandwidth, it will take some work off maintainers, who are very busy. > Thanks, > Jeremy > > On Wed, Jul 12, 2023 at 3:21 PM <jspewock@iol.unh.edu> wrote: >> >> From: Jeremy Spewock <jspewock@iol.unh.edu> >> >> Adds a new test suite for running smoke tests that verify general >> configuration aspects of the system under test. If any of these tests >> fail, the DTS execution terminates as part of a "fail-fast" model. >> >> Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu> >> --- >> dts/conf.yaml | 17 +- >> dts/framework/config/__init__.py | 105 +++++++++-- >> dts/framework/config/conf_yaml_schema.json | 142 +++++++++++++- >> dts/framework/dts.py | 87 ++++++--- >> dts/framework/exception.py | 12 ++ >> dts/framework/remote_session/__init__.py | 11 +- >> dts/framework/remote_session/os_session.py | 53 +++++- >> dts/framework/remote_session/posix_session.py | 29 ++- >> .../remote_session/remote/__init__.py | 10 + >> .../remote/interactive_remote_session.py | 82 ++++++++ >> .../remote/interactive_shell.py | 75 ++++++++ >> .../remote_session/remote/testpmd_shell.py | 75 ++++++++ >> dts/framework/test_result.py | 37 +++- >> dts/framework/test_suite.py | 10 +- >> dts/framework/testbed_model/node.py | 2 + >> dts/framework/testbed_model/sut_node.py | 176 +++++++++++++----- >> dts/framework/utils.py | 2 + >> dts/tests/TestSuite_smoke_tests.py | 113 +++++++++++ >> 18 files changed, 941 insertions(+), 97 deletions(-) >> create mode 100644 dts/framework/remote_session/remote/interactive_remote_session.py >> create mode 100644 dts/framework/remote_session/remote/interactive_shell.py >> create mode 100644 dts/framework/remote_session/remote/testpmd_shell.py >> create mode 100644 dts/tests/TestSuite_smoke_tests.py >> >> diff --git a/dts/conf.yaml b/dts/conf.yaml >> index a9bd8a3e..c0be7848 100644 >> --- a/dts/conf.yaml >> +++ b/dts/conf.yaml >> @@ -10,9 +10,13 @@ executions: >> compiler_wrapper: ccache >> perf: false >> func: true >> + skip_smoke_tests: false # optional flag that allow you to skip smoke tests >> test_suites: >> - hello_world >> - system_under_test: "SUT 1" >> + system_under_test: >> + node_name: "SUT 1" >> + vdevs: # optional; if removed, vdevs won't be used in the execution >> + - "crypto_openssl" >> nodes: >> - name: "SUT 1" >> hostname: sut1.change.me.localhost >> @@ -25,3 +29,14 @@ nodes: >> hugepages: # optional; if removed, will use system hugepage configuration >> amount: 256 >> force_first_numa: false >> + ports: >> + - pci: "0000:00:08.0" >> + os_driver_for_dpdk: vfio-pci # OS driver that DPDK will use >> + os_driver: i40e >> + peer_node: "TG 1" >> + peer_pci: "0000:00:08.0" >> + - pci: "0000:00:08.1" >> + os_driver_for_dpdk: vfio-pci >> + os_driver: i40e >> + peer_node: "TG 1" >> + peer_pci: "0000:00:08.1" >> diff --git a/dts/framework/config/__init__.py b/dts/framework/config/__init__.py >> index ebb0823f..9e144748 100644 >> --- a/dts/framework/config/__init__.py >> +++ b/dts/framework/config/__init__.py >> @@ -12,6 +12,7 @@ >> import pathlib >> from dataclasses import dataclass >> from enum import Enum, auto, unique >> +from pathlib import PurePath >> from typing import Any, TypedDict >> >> import warlock # type: ignore >> @@ -72,6 +73,20 @@ class HugepageConfiguration: >> force_first_numa: bool >> >> >> +@dataclass(slots=True, frozen=True) >> +class PortConfig: >> + node: str >> + pci: str >> + os_driver_for_dpdk: str >> + os_driver: str >> + peer_node: str >> + peer_pci: str >> + >> + @staticmethod >> + def from_dict(node: str, d: dict) -> "PortConfig": >> + return PortConfig(node=node, **d) >> + >> + >> @dataclass(slots=True, frozen=True) >> class NodeConfiguration: >> name: str >> @@ -84,6 +99,7 @@ class NodeConfiguration: >> use_first_core: bool >> memory_channels: int >> hugepages: HugepageConfiguration | None >> + ports: list[PortConfig] >> >> @staticmethod >> def from_dict(d: dict) -> "NodeConfiguration": >> @@ -92,19 +108,36 @@ def from_dict(d: dict) -> "NodeConfiguration": >> if "force_first_numa" not in hugepage_config: >> hugepage_config["force_first_numa"] = False >> hugepage_config = HugepageConfiguration(**hugepage_config) >> + common_config = { >> + "name": d["name"], >> + "hostname": d["hostname"], >> + "user": d["user"], >> + "password": d.get("password"), >> + "arch": Architecture(d["arch"]), >> + "os": OS(d["os"]), >> + "lcores": d.get("lcores", "1"), >> + "use_first_core": d.get("use_first_core", False), >> + "memory_channels": d.get("memory_channels", 1), >> + "hugepages": hugepage_config, >> + "ports": [PortConfig.from_dict(d["name"], port) for port in d["ports"]], >> + } >> + >> + return NodeConfiguration(**common_config) >> >> - return NodeConfiguration( >> - name=d["name"], >> - hostname=d["hostname"], >> - user=d["user"], >> - password=d.get("password"), >> - arch=Architecture(d["arch"]), >> - os=OS(d["os"]), >> - lcores=d.get("lcores", "1"), >> - use_first_core=d.get("use_first_core", False), >> - memory_channels=d.get("memory_channels", 1), >> - hugepages=hugepage_config, >> - ) >> + >> +@dataclass(slots=True, frozen=True) >> +class NodeInfo: >> + """Class to hold important versions within the node. >> + >> + This class, unlike the NodeConfiguration class, cannot be generated at the start. >> + This is because we need to initialize a connection with the node before we can >> + collect the information needed in this class. Therefore, it cannot be a part of >> + the configuration class above. >> + """ >> + >> + os_name: str >> + os_version: str >> + kernel_version: str >> >> >> @dataclass(slots=True, frozen=True) >> @@ -128,6 +161,18 @@ def from_dict(d: dict) -> "BuildTargetConfiguration": >> ) >> >> >> +@dataclass(slots=True, frozen=True) >> +class BuildTargetInfo: >> + """Class to hold important versions within the build target. >> + >> + This is very similar to the NodeInfo class, it just instead holds information >> + for the build target. >> + """ >> + >> + dpdk_version: str >> + compiler_version: str >> + >> + >> class TestSuiteConfigDict(TypedDict): >> suite: str >> cases: list[str] >> @@ -157,6 +202,8 @@ class ExecutionConfiguration: >> func: bool >> test_suites: list[TestSuiteConfig] >> system_under_test: NodeConfiguration >> + vdevs: list[str] >> + skip_smoke_tests: bool >> >> @staticmethod >> def from_dict(d: dict, node_map: dict) -> "ExecutionConfiguration": >> @@ -166,15 +213,20 @@ def from_dict(d: dict, node_map: dict) -> "ExecutionConfiguration": >> test_suites: list[TestSuiteConfig] = list( >> map(TestSuiteConfig.from_dict, d["test_suites"]) >> ) >> - sut_name = d["system_under_test"] >> + sut_name = d["system_under_test"]["node_name"] >> + skip_smoke_tests = d.get("skip_smoke_tests", False) >> assert sut_name in node_map, f"Unknown SUT {sut_name} in execution {d}" >> - >> + vdevs = ( >> + d["system_under_test"]["vdevs"] if "vdevs" in d["system_under_test"] else [] >> + ) >> return ExecutionConfiguration( >> build_targets=build_targets, >> perf=d["perf"], >> func=d["func"], >> + skip_smoke_tests=skip_smoke_tests, >> test_suites=test_suites, >> system_under_test=node_map[sut_name], >> + vdevs=vdevs, >> ) >> >> >> @@ -221,3 +273,28 @@ def load_config() -> Configuration: >> >> >> CONFIGURATION = load_config() >> + >> + >> +@unique >> +class InteractiveApp(Enum): >> + """An enum that represents different supported interactive applications. >> + >> + The values in this enum must all be set to objects that have a key called >> + "default_path" where "default_path" represents a PurePath object for the path >> + to the application. This default path will be passed into the handler class >> + for the application so that it can start the application. >> + """ >> + >> + testpmd = {"default_path": PurePath("app", "dpdk-testpmd")} >> + >> + @property >> + def path(self) -> PurePath: >> + """Default path of the application. >> + >> + For DPDK apps, this will be appended to the DPDK build directory. >> + """ >> + return self.value["default_path"] >> + >> + @path.setter >> + def path(self, path: PurePath) -> None: >> + self.value["default_path"] = path >> diff --git a/dts/framework/config/conf_yaml_schema.json b/dts/framework/config/conf_yaml_schema.json >> index ca2d4a1e..61f52b43 100644 >> --- a/dts/framework/config/conf_yaml_schema.json >> +++ b/dts/framework/config/conf_yaml_schema.json >> @@ -6,6 +6,76 @@ >> "type": "string", >> "description": "A unique identifier for a node" >> }, >> + "NIC": { >> + "type": "string", >> + "enum": [ >> + "ALL", >> + "ConnectX3_MT4103", >> + "ConnectX4_LX_MT4117", >> + "ConnectX4_MT4115", >> + "ConnectX5_MT4119", >> + "ConnectX5_MT4121", >> + "I40E_10G-10G_BASE_T_BC", >> + "I40E_10G-10G_BASE_T_X722", >> + "I40E_10G-SFP_X722", >> + "I40E_10G-SFP_XL710", >> + "I40E_10G-X722_A0", >> + "I40E_1G-1G_BASE_T_X722", >> + "I40E_25G-25G_SFP28", >> + "I40E_40G-QSFP_A", >> + "I40E_40G-QSFP_B", >> + "IAVF-ADAPTIVE_VF", >> + "IAVF-VF", >> + "IAVF_10G-X722_VF", >> + "ICE_100G-E810C_QSFP", >> + "ICE_25G-E810C_SFP", >> + "ICE_25G-E810_XXV_SFP", >> + "IGB-I350_VF", >> + "IGB_1G-82540EM", >> + "IGB_1G-82545EM_COPPER", >> + "IGB_1G-82571EB_COPPER", >> + "IGB_1G-82574L", >> + "IGB_1G-82576", >> + "IGB_1G-82576_QUAD_COPPER", >> + "IGB_1G-82576_QUAD_COPPER_ET2", >> + "IGB_1G-82580_COPPER", >> + "IGB_1G-I210_COPPER", >> + "IGB_1G-I350_COPPER", >> + "IGB_1G-I354_SGMII", >> + "IGB_1G-PCH_LPTLP_I218_LM", >> + "IGB_1G-PCH_LPTLP_I218_V", >> + "IGB_1G-PCH_LPT_I217_LM", >> + "IGB_1G-PCH_LPT_I217_V", >> + "IGB_2.5G-I354_BACKPLANE_2_5GBPS", >> + "IGC-I225_LM", >> + "IGC-I226_LM", >> + "IXGBE_10G-82599_SFP", >> + "IXGBE_10G-82599_SFP_SF_QP", >> + "IXGBE_10G-82599_T3_LOM", >> + "IXGBE_10G-82599_VF", >> + "IXGBE_10G-X540T", >> + "IXGBE_10G-X540_VF", >> + "IXGBE_10G-X550EM_A_SFP", >> + "IXGBE_10G-X550EM_X_10G_T", >> + "IXGBE_10G-X550EM_X_SFP", >> + "IXGBE_10G-X550EM_X_VF", >> + "IXGBE_10G-X550T", >> + "IXGBE_10G-X550_VF", >> + "brcm_57414", >> + "brcm_P2100G", >> + "cavium_0011", >> + "cavium_a034", >> + "cavium_a063", >> + "cavium_a064", >> + "fastlinq_ql41000", >> + "fastlinq_ql41000_vf", >> + "fastlinq_ql45000", >> + "fastlinq_ql45000_vf", >> + "hi1822", >> + "virtio" >> + ] >> + }, >> + >> "ARCH": { >> "type": "string", >> "enum": [ >> @@ -94,6 +164,19 @@ >> "amount" >> ] >> }, >> + "pci_address": { >> + "type": "string", >> + "pattern": "^[\\da-fA-F]{4}:[\\da-fA-F]{2}:[\\da-fA-F]{2}.\\d:?\\w*$" >> + }, >> + "port_peer_address": { >> + "description": "Peer is a TRex port, and IXIA port or a PCI address", >> + "oneOf": [ >> + { >> + "description": "PCI peer port", >> + "$ref": "#/definitions/pci_address" >> + } >> + ] >> + }, >> "test_suite": { >> "type": "string", >> "enum": [ >> @@ -165,6 +248,44 @@ >> }, >> "hugepages": { >> "$ref": "#/definitions/hugepages" >> + }, >> + "ports": { >> + "type": "array", >> + "items": { >> + "type": "object", >> + "description": "Each port should be described on both sides of the connection. This makes configuration slightly more verbose but greatly simplifies implementation. If there are an inconsistencies, then DTS will not run until that issue is fixed. An example inconsistency would be port 1, node 1 says it is connected to port 1, node 2, but port 1, node 2 says it is connected to port 2, node 1.", >> + "properties": { >> + "pci": { >> + "$ref": "#/definitions/pci_address", >> + "description": "The local PCI address of the port" >> + }, >> + "os_driver_for_dpdk": { >> + "type": "string", >> + "description": "The driver that the kernel should bind this device to for DPDK to use it. (ex: vfio-pci)" >> + }, >> + "os_driver": { >> + "type": "string", >> + "description": "The driver normally used by this port (ex: i40e)" >> + }, >> + "peer_node": { >> + "type": "string", >> + "description": "The name of the node the peer port is on" >> + }, >> + "peer_pci": { >> + "$ref": "#/definitions/pci_address", >> + "description": "The PCI address of the peer port" >> + } >> + }, >> + "additionalProperties": false, >> + "required": [ >> + "pci", >> + "os_driver_for_dpdk", >> + "os_driver", >> + "peer_node", >> + "peer_pci" >> + ] >> + }, >> + "minimum": 1 >> } >> }, >> "additionalProperties": false, >> @@ -211,8 +332,27 @@ >> ] >> } >> }, >> + "skip_smoke_tests": { >> + "description": "Optional field that allows you to skip smoke testing", >> + "type": "boolean" >> + }, >> "system_under_test": { >> - "$ref": "#/definitions/node_name" >> + "type":"object", >> + "properties": { >> + "node_name": { >> + "$ref": "#/definitions/node_name" >> + }, >> + "vdevs": { >> + "description": "Opentional list of names of vdevs to be used in execution", >> + "type": "array", >> + "items": { >> + "type": "string" >> + } >> + } >> + }, >> + "required": [ >> + "node_name" >> + ] >> } >> }, >> "additionalProperties": false, >> diff --git a/dts/framework/dts.py b/dts/framework/dts.py >> index 05022845..7b09d8fb 100644 >> --- a/dts/framework/dts.py >> +++ b/dts/framework/dts.py >> @@ -5,7 +5,13 @@ >> >> import sys >> >> -from .config import CONFIGURATION, BuildTargetConfiguration, ExecutionConfiguration >> +from .config import ( >> + CONFIGURATION, >> + BuildTargetConfiguration, >> + ExecutionConfiguration, >> + TestSuiteConfig, >> +) >> +from .exception import BlockingTestSuiteError >> from .logger import DTSLOG, getLogger >> from .test_result import BuildTargetResult, DTSResult, ExecutionResult, Result >> from .test_suite import get_test_suites >> @@ -82,7 +88,7 @@ def _run_execution( >> running all build targets in the given execution. >> """ >> dts_logger.info(f"Running execution with SUT '{execution.system_under_test.name}'.") >> - execution_result = result.add_execution(sut_node.config) >> + execution_result = result.add_execution(sut_node.config, sut_node.node_info) >> >> try: >> sut_node.set_up_execution(execution) >> @@ -118,14 +124,15 @@ def _run_build_target( >> >> try: >> sut_node.set_up_build_target(build_target) >> - result.dpdk_version = sut_node.dpdk_version >> + # result.dpdk_version = sut_node.dpdk_version >> + build_target_result.add_build_target_versions(sut_node.get_build_target_info()) >> build_target_result.update_setup(Result.PASS) >> except Exception as e: >> dts_logger.exception("Build target setup failed.") >> build_target_result.update_setup(Result.FAIL, e) >> >> else: >> - _run_suites(sut_node, execution, build_target_result) >> + _run_all_suites(sut_node, execution, build_target_result) >> >> finally: >> try: >> @@ -136,7 +143,7 @@ def _run_build_target( >> build_target_result.update_teardown(Result.FAIL, e) >> >> >> -def _run_suites( >> +def _run_all_suites( >> sut_node: SutNode, >> execution: ExecutionConfiguration, >> build_target_result: BuildTargetResult, >> @@ -146,27 +153,61 @@ def _run_suites( >> with possibly only a subset of test cases. >> If no subset is specified, run all test cases. >> """ >> + end_build_target = False >> + if not execution.skip_smoke_tests: >> + execution.test_suites[:0] = [TestSuiteConfig.from_dict("smoke_tests")] >> for test_suite_config in execution.test_suites: >> try: >> - full_suite_path = f"tests.TestSuite_{test_suite_config.test_suite}" >> - test_suite_classes = get_test_suites(full_suite_path) >> - suites_str = ", ".join((x.__name__ for x in test_suite_classes)) >> - dts_logger.debug( >> - f"Found test suites '{suites_str}' in '{full_suite_path}'." >> + _run_single_suite( >> + sut_node, execution, build_target_result, test_suite_config >> ) >> - except Exception as e: >> - dts_logger.exception("An error occurred when searching for test suites.") >> - result.update_setup(Result.ERROR, e) >> - >> - else: >> - for test_suite_class in test_suite_classes: >> - test_suite = test_suite_class( >> - sut_node, >> - test_suite_config.test_cases, >> - execution.func, >> - build_target_result, >> - ) >> - test_suite.run() >> + except BlockingTestSuiteError as e: >> + dts_logger.exception( >> + f"An error occurred within {test_suite_config.test_suite}. " >> + "Skipping build target..." >> + ) >> + result.add_error(e) >> + end_build_target = True >> + # if a blocking test failed and we need to bail out of suite executions >> + if end_build_target: >> + break >> + >> + >> +def _run_single_suite( >> + sut_node: SutNode, >> + execution: ExecutionConfiguration, >> + build_target_result: BuildTargetResult, >> + test_suite_config: TestSuiteConfig, >> +) -> None: >> + """Runs a single test suite. >> + >> + Args: >> + sut_node: Node to run tests on. >> + execution: Execution the test case belongs to. >> + build_target_result: Build target configuration test case is run on >> + test_suite_config: Test suite configuration >> + >> + Raises: >> + BlockingTestSuiteError: If a test suite that was marked as blocking fails. >> + """ >> + try: >> + full_suite_path = f"tests.TestSuite_{test_suite_config.test_suite}" >> + test_suite_classes = get_test_suites(full_suite_path) >> + suites_str = ", ".join((x.__name__ for x in test_suite_classes)) >> + dts_logger.debug(f"Found test suites '{suites_str}' in '{full_suite_path}'.") >> + except Exception as e: >> + dts_logger.exception("An error occurred when searching for test suites.") >> + result.update_setup(Result.ERROR, e) >> + >> + else: >> + for test_suite_class in test_suite_classes: >> + test_suite = test_suite_class( >> + sut_node, >> + test_suite_config.test_cases, >> + execution.func, >> + build_target_result, >> + ) >> + test_suite.run() >> >> >> def _exit_dts() -> None: >> diff --git a/dts/framework/exception.py b/dts/framework/exception.py >> index ca353d98..dfb12df4 100644 >> --- a/dts/framework/exception.py >> +++ b/dts/framework/exception.py >> @@ -25,6 +25,7 @@ class ErrorSeverity(IntEnum): >> SSH_ERR = 4 >> DPDK_BUILD_ERR = 10 >> TESTCASE_VERIFY_ERR = 20 >> + BLOCKING_TESTSUITE_ERR = 25 >> >> >> class DTSError(Exception): >> @@ -144,3 +145,14 @@ def __init__(self, value: str): >> >> def __str__(self) -> str: >> return repr(self.value) >> + >> + >> +class BlockingTestSuiteError(DTSError): >> + suite_name: str >> + severity: ClassVar[ErrorSeverity] = ErrorSeverity.BLOCKING_TESTSUITE_ERR >> + >> + def __init__(self, suite_name: str) -> None: >> + self.suite_name = suite_name >> + >> + def __str__(self) -> str: >> + return f"Blocking suite {self.suite_name} failed." >> diff --git a/dts/framework/remote_session/__init__.py b/dts/framework/remote_session/__init__.py >> index ee221503..2c408c25 100644 >> --- a/dts/framework/remote_session/__init__.py >> +++ b/dts/framework/remote_session/__init__.py >> @@ -1,5 +1,6 @@ >> # SPDX-License-Identifier: BSD-3-Clause >> # Copyright(c) 2023 PANTHEON.tech s.r.o. >> +# Copyright(c) 2023 University of New Hampshire >> >> """ >> The package provides modules for managing remote connections to a remote host (node), >> @@ -17,7 +18,15 @@ >> >> from .linux_session import LinuxSession >> from .os_session import OSSession >> -from .remote import CommandResult, RemoteSession, SSHSession >> +from .remote import ( >> + CommandResult, >> + InteractiveRemoteSession, >> + InteractiveShell, >> + RemoteSession, >> + SSHSession, >> + TestPmdDevice, >> + TestPmdShell, >> +) >> >> >> def create_session( >> diff --git a/dts/framework/remote_session/os_session.py b/dts/framework/remote_session/os_session.py >> index 4c48ae25..48f05c44 100644 >> --- a/dts/framework/remote_session/os_session.py >> +++ b/dts/framework/remote_session/os_session.py >> @@ -5,14 +5,22 @@ >> from abc import ABC, abstractmethod >> from collections.abc import Iterable >> from pathlib import PurePath >> +from typing import Union >> >> -from framework.config import Architecture, NodeConfiguration >> +from framework.config import Architecture, InteractiveApp, NodeConfiguration, NodeInfo >> from framework.logger import DTSLOG >> +from framework.remote_session.remote import InteractiveShell, TestPmdShell >> from framework.settings import SETTINGS >> from framework.testbed_model import LogicalCore >> from framework.utils import EnvVarsDict, MesonArgs >> >> -from .remote import CommandResult, RemoteSession, create_remote_session >> +from .remote import ( >> + CommandResult, >> + InteractiveRemoteSession, >> + RemoteSession, >> + create_interactive_session, >> + create_remote_session, >> +) >> >> >> class OSSession(ABC): >> @@ -26,6 +34,7 @@ class OSSession(ABC): >> name: str >> _logger: DTSLOG >> remote_session: RemoteSession >> + interactive_session: InteractiveRemoteSession >> >> def __init__( >> self, >> @@ -37,6 +46,7 @@ def __init__( >> self.name = name >> self._logger = logger >> self.remote_session = create_remote_session(node_config, name, logger) >> + self.interactive_session = create_interactive_session(node_config, name, logger) >> >> def close(self, force: bool = False) -> None: >> """ >> @@ -64,6 +74,33 @@ def send_command( >> """ >> return self.remote_session.send_command(command, timeout, verify, env) >> >> + def create_interactive_shell( >> + self, >> + shell_type: InteractiveApp, >> + path_to_app: PurePath, >> + eal_parameters: str, >> + timeout: float, >> + ) -> Union[InteractiveShell, TestPmdShell]: >> + """ >> + See "create_interactive_shell" in SutNode >> + """ >> + match (shell_type): >> + case InteractiveApp.testpmd: >> + return TestPmdShell( >> + self.interactive_session.session, >> + self._logger, >> + path_to_app, >> + timeout=timeout, >> + eal_flags=eal_parameters, >> + ) >> + case _: >> + self._logger.info( >> + f"Unhandled app type {shell_type.name}, defaulting to shell." >> + ) >> + return InteractiveShell( >> + self.interactive_session.session, self._logger, path_to_app, timeout >> + ) >> + >> @abstractmethod >> def guess_dpdk_remote_dir(self, remote_dir) -> PurePath: >> """ >> @@ -173,3 +210,15 @@ def setup_hugepages(self, hugepage_amount: int, force_first_numa: bool) -> None: >> if needed and mount the hugepages if needed. >> If force_first_numa is True, configure hugepages just on the first socket. >> """ >> + >> + @abstractmethod >> + def get_compiler_version(self, compiler_name: str) -> str: >> + """ >> + Get installed version of compiler used for DPDK >> + """ >> + >> + @abstractmethod >> + def get_node_info(self) -> NodeInfo: >> + """ >> + Collect information about the node >> + """ >> diff --git a/dts/framework/remote_session/posix_session.py b/dts/framework/remote_session/posix_session.py >> index d38062e8..4e419877 100644 >> --- a/dts/framework/remote_session/posix_session.py >> +++ b/dts/framework/remote_session/posix_session.py >> @@ -6,7 +6,7 @@ >> from collections.abc import Iterable >> from pathlib import PurePath, PurePosixPath >> >> -from framework.config import Architecture >> +from framework.config import Architecture, NodeInfo >> from framework.exception import DPDKBuildError, RemoteCommandExecutionError >> from framework.settings import SETTINGS >> from framework.utils import EnvVarsDict, MesonArgs >> @@ -219,3 +219,30 @@ def _remove_dpdk_runtime_dirs( >> >> def get_dpdk_file_prefix(self, dpdk_prefix) -> str: >> return "" >> + >> + def get_compiler_version(self, compiler_name: str) -> str: >> + match compiler_name: >> + case "gcc": >> + return self.send_command( >> + f"{compiler_name} --version", SETTINGS.timeout >> + ).stdout.split("\n")[0] >> + case "clang": >> + return self.send_command( >> + f"{compiler_name} --version", SETTINGS.timeout >> + ).stdout.split("\n")[0] >> + case "msvc": >> + return self.send_command("cl", SETTINGS.timeout).stdout >> + case "icc": >> + return self.send_command(f"{compiler_name} -V", SETTINGS.timeout).stdout >> + case _: >> + raise ValueError(f"Unknown compiler {compiler_name}") >> + >> + def get_node_info(self) -> NodeInfo: >> + os_release_info = self.send_command( >> + "awk -F= '$1 ~ /^NAME$|^VERSION$/ {print $2}' /etc/os-release", >> + SETTINGS.timeout, >> + ).stdout.split("\n") >> + kernel_version = self.send_command("uname -r", SETTINGS.timeout).stdout >> + return NodeInfo( >> + os_release_info[0].strip(), os_release_info[1].strip(), kernel_version >> + ) >> diff --git a/dts/framework/remote_session/remote/__init__.py b/dts/framework/remote_session/remote/__init__.py >> index 8a151221..03fd309f 100644 >> --- a/dts/framework/remote_session/remote/__init__.py >> +++ b/dts/framework/remote_session/remote/__init__.py >> @@ -1,16 +1,26 @@ >> # SPDX-License-Identifier: BSD-3-Clause >> # Copyright(c) 2023 PANTHEON.tech s.r.o. >> +# Copyright(c) 2023 University of New Hampshire >> >> # pylama:ignore=W0611 >> >> from framework.config import NodeConfiguration >> from framework.logger import DTSLOG >> >> +from .interactive_remote_session import InteractiveRemoteSession >> +from .interactive_shell import InteractiveShell >> from .remote_session import CommandResult, RemoteSession >> from .ssh_session import SSHSession >> +from .testpmd_shell import TestPmdDevice, TestPmdShell >> >> >> def create_remote_session( >> node_config: NodeConfiguration, name: str, logger: DTSLOG >> ) -> RemoteSession: >> return SSHSession(node_config, name, logger) >> + >> + >> +def create_interactive_session( >> + node_config: NodeConfiguration, name: str, logger: DTSLOG >> +) -> InteractiveRemoteSession: >> + return InteractiveRemoteSession(node_config, logger) >> diff --git a/dts/framework/remote_session/remote/interactive_remote_session.py b/dts/framework/remote_session/remote/interactive_remote_session.py >> new file mode 100644 >> index 00000000..2d94daf2 >> --- /dev/null >> +++ b/dts/framework/remote_session/remote/interactive_remote_session.py >> @@ -0,0 +1,82 @@ >> +# SPDX-License-Identifier: BSD-3-Clause >> +# Copyright(c) 2023 University of New Hampshire >> + >> +import socket >> +import traceback >> + >> +from paramiko import AutoAddPolicy, SSHClient, Transport # type: ignore >> +from paramiko.ssh_exception import ( # type: ignore >> + AuthenticationException, >> + BadHostKeyException, >> + NoValidConnectionsError, >> + SSHException, >> +) >> + >> +from framework.config import NodeConfiguration >> +from framework.exception import SSHConnectionError >> +from framework.logger import DTSLOG >> + >> + >> +class InteractiveRemoteSession: >> + hostname: str >> + ip: str >> + port: int >> + username: str >> + password: str >> + _logger: DTSLOG >> + _node_config: NodeConfiguration >> + session: SSHClient >> + _transport: Transport | None >> + >> + def __init__(self, node_config: NodeConfiguration, _logger: DTSLOG) -> None: >> + self._node_config = node_config >> + self._logger = _logger >> + self.hostname = node_config.hostname >> + self.username = node_config.user >> + self.password = node_config.password if node_config.password else "" >> + port = "22" >> + self.ip = node_config.hostname >> + if ":" in node_config.hostname: >> + self.ip, port = node_config.hostname.split(":") >> + self.port = int(port) >> + self._logger.info( >> + f"Initializing interactive connection for {self.username}@{self.hostname}" >> + ) >> + self._connect() >> + self._logger.info( >> + f"Interactive connection successful for {self.username}@{self.hostname}" >> + ) >> + >> + def _connect(self) -> None: >> + client = SSHClient() >> + client.set_missing_host_key_policy(AutoAddPolicy) >> + self.session = client >> + retry_attempts = 10 >> + for retry_attempt in range(retry_attempts): >> + try: >> + client.connect( >> + self.ip, >> + username=self.username, >> + port=self.port, >> + password=self.password, >> + timeout=20 if self.port else 10, >> + ) >> + except (TypeError, BadHostKeyException, AuthenticationException) as e: >> + self._logger.exception(e) >> + raise SSHConnectionError(self.hostname) from e >> + except (NoValidConnectionsError, socket.error, SSHException) as e: >> + self._logger.debug(traceback.format_exc()) >> + self._logger.warning(e) >> + self._logger.info( >> + "Retrying interactive session connection: " >> + f"retry number {retry_attempt +1}" >> + ) >> + else: >> + break >> + else: >> + raise SSHConnectionError(self.hostname) >> + # Interactive sessions are used on an "as needed" basis so we have >> + # to set a keepalive >> + self._transport = self.session.get_transport() >> + if self._transport is not None: >> + self._transport.set_keepalive(30) >> diff --git a/dts/framework/remote_session/remote/interactive_shell.py b/dts/framework/remote_session/remote/interactive_shell.py >> new file mode 100644 >> index 00000000..0cb0f7b4 >> --- /dev/null >> +++ b/dts/framework/remote_session/remote/interactive_shell.py >> @@ -0,0 +1,75 @@ >> +from pathlib import PurePath >> + >> +from paramiko import Channel, SSHClient, channel # type: ignore >> + >> +from framework.logger import DTSLOG >> +from framework.settings import SETTINGS >> + >> + >> +class InteractiveShell: >> + >> + _interactive_session: SSHClient >> + _stdin: channel.ChannelStdinFile >> + _stdout: channel.ChannelFile >> + _ssh_channel: Channel >> + _logger: DTSLOG >> + _timeout: float >> + _path_to_app: PurePath >> + >> + def __init__( >> + self, >> + interactive_session: SSHClient, >> + logger: DTSLOG, >> + path_to_app: PurePath, >> + timeout: float = SETTINGS.timeout, >> + ) -> None: >> + self._interactive_session = interactive_session >> + self._ssh_channel = self._interactive_session.invoke_shell() >> + self._stdin = self._ssh_channel.makefile_stdin("w") >> + self._stdout = self._ssh_channel.makefile("r") >> + self._ssh_channel.settimeout(timeout) >> + self._ssh_channel.set_combine_stderr(True) # combines stdout and stderr streams >> + self._logger = logger >> + self._timeout = timeout >> + self._path_to_app = path_to_app >> + self._start_application() >> + >> + def _start_application(self) -> None: >> + """Starts a new interactive application based on _path_to_app. >> + >> + This method is often overridden by subclasses as their process for >> + starting may look different. >> + """ >> + self.send_command_get_output(f"{self._path_to_app}", "") >> + >> + def send_command_get_output(self, command: str, prompt: str) -> str: >> + """Send a command and get all output before the expected ending string. >> + >> + Lines that expect input are not included in the stdout buffer so they cannot be >> + used for expect. For example, if you were prompted to log into something >> + with a username and password, you cannot expect "username:" because it won't >> + yet be in the stdout buffer. A work around for this could be consuming an >> + extra newline character to force the current prompt into the stdout buffer. >> + >> + Returns: >> + All output in the buffer before expected string >> + """ >> + self._logger.info(f"Sending command {command.strip()}...") >> + self._stdin.write(f"{command}\n") >> + self._stdin.flush() >> + out: str = "" >> + for line in self._stdout: >> + out += line >> + if prompt in line and not line.rstrip().endswith( >> + command.rstrip() >> + ): # ignore line that sent command >> + break >> + self._logger.debug(f"Got output: {out}") >> + return out >> + >> + def close(self) -> None: >> + self._stdin.close() >> + self._ssh_channel.close() >> + >> + def __del__(self) -> None: >> + self.close() >> diff --git a/dts/framework/remote_session/remote/testpmd_shell.py b/dts/framework/remote_session/remote/testpmd_shell.py >> new file mode 100644 >> index 00000000..31c25258 >> --- /dev/null >> +++ b/dts/framework/remote_session/remote/testpmd_shell.py >> @@ -0,0 +1,75 @@ >> +# SPDX-License-Identifier: BSD-3-Clause >> +# Copyright(c) 2023 University of New Hampshire >> + >> + >> +from pathlib import PurePath >> + >> +from paramiko import SSHClient # type: ignore >> + >> +from framework.logger import DTSLOG >> +from framework.settings import SETTINGS >> + >> +from .interactive_shell import InteractiveShell >> + >> + >> +class TestPmdDevice(object): >> + pci_address: str >> + >> + def __init__(self, pci_address: str): >> + self.pci_address = pci_address >> + >> + def __str__(self) -> str: >> + return self.pci_address >> + >> + >> +class TestPmdShell(InteractiveShell): >> + expected_prompt: str = "testpmd>" >> + _eal_flags: str >> + >> + def __init__( >> + self, >> + interactive_session: SSHClient, >> + logger: DTSLOG, >> + path_to_testpmd: PurePath, >> + eal_flags: str, >> + timeout: float = SETTINGS.timeout, >> + ) -> None: >> + """Initializes an interactive testpmd session using specified parameters.""" >> + self._eal_flags = eal_flags >> + >> + super(TestPmdShell, self).__init__( >> + interactive_session, >> + logger=logger, >> + path_to_app=path_to_testpmd, >> + timeout=timeout, >> + ) >> + >> + def _start_application(self) -> None: >> + """Starts a new interactive testpmd shell using _path_to_app.""" >> + self.send_command( >> + f"{self._path_to_app} {self._eal_flags} -- -i", >> + ) >> + >> + def send_command(self, command: str, prompt: str = expected_prompt) -> str: >> + """Specific way of handling the command for testpmd >> + >> + An extra newline character is consumed in order to force the current line into >> + the stdout buffer. >> + """ >> + return self.send_command_get_output(f"{command}\n", prompt) >> + >> + def get_devices(self) -> list[TestPmdDevice]: >> + """Get a list of device names that are known to testpmd >> + >> + Uses the device info listed in testpmd and then parses the output to >> + return only the names of the devices. >> + >> + Returns: >> + A list of strings representing device names (e.g. 0000:14:00.1) >> + """ >> + dev_info: str = self.send_command("show device info all") >> + dev_list: list[TestPmdDevice] = [] >> + for line in dev_info.split("\n"): >> + if "device name:" in line.lower(): >> + dev_list.append(TestPmdDevice(line.strip().split(": ")[1].strip())) >> + return dev_list >> diff --git a/dts/framework/test_result.py b/dts/framework/test_result.py >> index 74391982..fe199467 100644 >> --- a/dts/framework/test_result.py >> +++ b/dts/framework/test_result.py >> @@ -1,5 +1,6 @@ >> # SPDX-License-Identifier: BSD-3-Clause >> # Copyright(c) 2023 PANTHEON.tech s.r.o. >> +# Copyright(c) 2023 University of New Hampshire >> >> """ >> Generic result container and reporters >> @@ -13,9 +14,11 @@ >> OS, >> Architecture, >> BuildTargetConfiguration, >> + BuildTargetInfo, >> Compiler, >> CPUType, >> NodeConfiguration, >> + NodeInfo, >> ) >> from .exception import DTSError, ErrorSeverity >> from .logger import DTSLOG >> @@ -67,12 +70,14 @@ class Statistics(dict): >> Using a dict provides a convenient way to format the data. >> """ >> >> - def __init__(self, dpdk_version): >> + def __init__(self, output_info: dict[str, str] | None): >> super(Statistics, self).__init__() >> for result in Result: >> self[result.name] = 0 >> self["PASS RATE"] = 0.0 >> - self["DPDK VERSION"] = dpdk_version >> + if output_info: >> + for info_key, info_val in output_info.items(): >> + self[info_key] = info_val >> >> def __iadd__(self, other: Result) -> "Statistics": >> """ >> @@ -206,6 +211,8 @@ class BuildTargetResult(BaseResult): >> os: OS >> cpu: CPUType >> compiler: Compiler >> + compiler_version: str | None >> + dpdk_version: str | None >> >> def __init__(self, build_target: BuildTargetConfiguration): >> super(BuildTargetResult, self).__init__() >> @@ -213,6 +220,12 @@ def __init__(self, build_target: BuildTargetConfiguration): >> self.os = build_target.os >> self.cpu = build_target.cpu >> self.compiler = build_target.compiler >> + self.compiler_version = None >> + self.dpdk_version = None >> + >> + def add_build_target_versions(self, versions: BuildTargetInfo) -> None: >> + self.compiler_version = versions.compiler_version >> + self.dpdk_version = versions.dpdk_version >> >> def add_test_suite(self, test_suite_name: str) -> TestSuiteResult: >> test_suite_result = TestSuiteResult(test_suite_name) >> @@ -228,10 +241,17 @@ class ExecutionResult(BaseResult): >> """ >> >> sut_node: NodeConfiguration >> + sut_os_name: str >> + sut_os_version: str >> + sut_kernel_version: str >> >> - def __init__(self, sut_node: NodeConfiguration): >> + def __init__(self, sut_node: NodeConfiguration, sut_version_info: NodeInfo): >> super(ExecutionResult, self).__init__() >> self.sut_node = sut_node >> + self.sut_version_info = sut_version_info >> + self.sut_os_name = sut_version_info.os_name >> + self.sut_os_version = sut_version_info.os_version >> + self.sut_kernel_version = sut_version_info.kernel_version >> >> def add_build_target( >> self, build_target: BuildTargetConfiguration >> @@ -258,6 +278,7 @@ class DTSResult(BaseResult): >> """ >> >> dpdk_version: str | None >> + output: dict | None >> _logger: DTSLOG >> _errors: list[Exception] >> _return_code: ErrorSeverity >> @@ -267,14 +288,17 @@ class DTSResult(BaseResult): >> def __init__(self, logger: DTSLOG): >> super(DTSResult, self).__init__() >> self.dpdk_version = None >> + self.output = None >> self._logger = logger >> self._errors = [] >> self._return_code = ErrorSeverity.NO_ERR >> self._stats_result = None >> self._stats_filename = os.path.join(SETTINGS.output_dir, "statistics.txt") >> >> - def add_execution(self, sut_node: NodeConfiguration) -> ExecutionResult: >> - execution_result = ExecutionResult(sut_node) >> + def add_execution( >> + self, sut_node: NodeConfiguration, sut_version_info: NodeInfo >> + ) -> ExecutionResult: >> + execution_result = ExecutionResult(sut_node, sut_version_info) >> self._inner_results.append(execution_result) >> return execution_result >> >> @@ -296,7 +320,8 @@ def process(self) -> None: >> for error in self._errors: >> self._logger.debug(repr(error)) >> >> - self._stats_result = Statistics(self.dpdk_version) >> + self._stats_result = Statistics(self.output) >> + # add information gathered from the smoke tests to the statistics >> self.add_stats(self._stats_result) >> with open(self._stats_filename, "w+") as stats_file: >> stats_file.write(str(self._stats_result)) >> diff --git a/dts/framework/test_suite.py b/dts/framework/test_suite.py >> index 0705f38f..de94c933 100644 >> --- a/dts/framework/test_suite.py >> +++ b/dts/framework/test_suite.py >> @@ -11,7 +11,12 @@ >> import re >> from types import MethodType >> >> -from .exception import ConfigurationError, SSHTimeoutError, TestCaseVerifyError >> +from .exception import ( >> + BlockingTestSuiteError, >> + ConfigurationError, >> + SSHTimeoutError, >> + TestCaseVerifyError, >> +) >> from .logger import DTSLOG, getLogger >> from .settings import SETTINGS >> from .test_result import BuildTargetResult, Result, TestCaseResult, TestSuiteResult >> @@ -37,6 +42,7 @@ class TestSuite(object): >> """ >> >> sut_node: SutNode >> + is_blocking = False >> _logger: DTSLOG >> _test_cases_to_run: list[str] >> _func: bool >> @@ -118,6 +124,8 @@ def run(self) -> None: >> f"the next test suite may be affected." >> ) >> self._result.update_setup(Result.ERROR, e) >> + if len(self._result.get_errors()) > 0 and self.is_blocking: >> + raise BlockingTestSuiteError(test_suite_name) >> >> def _execute_test_suite(self) -> None: >> """ >> diff --git a/dts/framework/testbed_model/node.py b/dts/framework/testbed_model/node.py >> index d48fafe6..c5147e0e 100644 >> --- a/dts/framework/testbed_model/node.py >> +++ b/dts/framework/testbed_model/node.py >> @@ -40,6 +40,7 @@ class Node(object): >> lcores: list[LogicalCore] >> _logger: DTSLOG >> _other_sessions: list[OSSession] >> + _execution_config: ExecutionConfiguration >> >> def __init__(self, node_config: NodeConfiguration): >> self.config = node_config >> @@ -64,6 +65,7 @@ def set_up_execution(self, execution_config: ExecutionConfiguration) -> None: >> """ >> self._setup_hugepages() >> self._set_up_execution(execution_config) >> + self._execution_config = execution_config >> >> def _set_up_execution(self, execution_config: ExecutionConfiguration) -> None: >> """ >> diff --git a/dts/framework/testbed_model/sut_node.py b/dts/framework/testbed_model/sut_node.py >> index 2b2b50d9..6783e0b8 100644 >> --- a/dts/framework/testbed_model/sut_node.py >> +++ b/dts/framework/testbed_model/sut_node.py >> @@ -1,14 +1,27 @@ >> # SPDX-License-Identifier: BSD-3-Clause >> # Copyright(c) 2010-2014 Intel Corporation >> # Copyright(c) 2023 PANTHEON.tech s.r.o. >> +# Copyright(c) 2023 University of New Hampshire >> >> import os >> import tarfile >> import time >> from pathlib import PurePath >> - >> -from framework.config import BuildTargetConfiguration, NodeConfiguration >> -from framework.remote_session import CommandResult, OSSession >> +from typing import Union >> + >> +from framework.config import ( >> + BuildTargetConfiguration, >> + BuildTargetInfo, >> + InteractiveApp, >> + NodeConfiguration, >> + NodeInfo, >> +) >> +from framework.remote_session import ( >> + CommandResult, >> + InteractiveShell, >> + OSSession, >> + TestPmdShell, >> +) >> from framework.settings import SETTINGS >> from framework.utils import EnvVarsDict, MesonArgs >> >> @@ -16,6 +29,52 @@ >> from .node import Node >> >> >> +class EalParameters(object): >> + def __init__( >> + self, >> + lcore_list: LogicalCoreList, >> + memory_channels: int, >> + prefix: str, >> + no_pci: bool, >> + vdevs: list[VirtualDevice], >> + other_eal_param: str, >> + ): >> + """ >> + Generate eal parameters character string; >> + :param lcore_list: the list of logical cores to use. >> + :param memory_channels: the number of memory channels to use. >> + :param prefix: set file prefix string, eg: >> + prefix='vf' >> + :param no_pci: switch of disable PCI bus eg: >> + no_pci=True >> + :param vdevs: virtual device list, eg: >> + vdevs=[ >> + VirtualDevice('net_ring0'), >> + VirtualDevice('net_ring1') >> + ] >> + :param other_eal_param: user defined DPDK eal parameters, eg: >> + other_eal_param='--single-file-segments' >> + """ >> + self._lcore_list = f"-l {lcore_list}" >> + self._memory_channels = f"-n {memory_channels}" >> + self._prefix = prefix >> + if prefix: >> + self._prefix = f"--file-prefix={prefix}" >> + self._no_pci = "--no-pci" if no_pci else "" >> + self._vdevs = " ".join(f"--vdev {vdev}" for vdev in vdevs) >> + self._other_eal_param = other_eal_param >> + >> + def __str__(self) -> str: >> + return ( >> + f"{self._lcore_list} " >> + f"{self._memory_channels} " >> + f"{self._prefix} " >> + f"{self._no_pci} " >> + f"{self._vdevs} " >> + f"{self._other_eal_param}" >> + ) >> + >> + >> class SutNode(Node): >> """ >> A class for managing connections to the System under Test, providing >> @@ -30,9 +89,11 @@ class SutNode(Node): >> _env_vars: EnvVarsDict >> _remote_tmp_dir: PurePath >> __remote_dpdk_dir: PurePath | None >> - _dpdk_version: str | None >> _app_compile_timeout: float >> _dpdk_kill_session: OSSession | None >> + _dpdk_version: str | None >> + _node_info: NodeInfo | None >> + _compiler_version: str | None >> >> def __init__(self, node_config: NodeConfiguration): >> super(SutNode, self).__init__(node_config) >> @@ -41,12 +102,14 @@ def __init__(self, node_config: NodeConfiguration): >> self._env_vars = EnvVarsDict() >> self._remote_tmp_dir = self.main_session.get_remote_tmp_dir() >> self.__remote_dpdk_dir = None >> - self._dpdk_version = None >> self._app_compile_timeout = 90 >> self._dpdk_kill_session = None >> self._dpdk_timestamp = ( >> f"{str(os.getpid())}_{time.strftime('%Y%m%d%H%M%S', time.localtime())}" >> ) >> + self._dpdk_version = None >> + self._node_info = None >> + self._compiler_version = None >> >> @property >> def _remote_dpdk_dir(self) -> PurePath: >> @@ -75,6 +138,32 @@ def dpdk_version(self) -> str: >> ) >> return self._dpdk_version >> >> + @property >> + def node_info(self) -> NodeInfo: >> + if self._node_info is None: >> + self._node_info = self.main_session.get_node_info() >> + return self._node_info >> + >> + @property >> + def compiler_version(self) -> str: >> + if self._compiler_version is None: >> + if self._build_target_config is not None: >> + self._compiler_version = self.main_session.get_compiler_version( >> + self._build_target_config.compiler.name >> + ) >> + else: >> + self._logger.warning( >> + "Failed to get compiler version because" >> + "_build_target_config is None." >> + ) >> + return "" >> + return self._compiler_version >> + >> + def get_build_target_info(self) -> BuildTargetInfo: >> + return BuildTargetInfo( >> + dpdk_version=self.dpdk_version, compiler_version=self.compiler_version >> + ) >> + >> def _guess_dpdk_remote_dir(self) -> PurePath: >> return self.main_session.guess_dpdk_remote_dir(self._remote_tmp_dir) >> >> @@ -84,6 +173,10 @@ def _set_up_build_target( >> """ >> Setup DPDK on the SUT node. >> """ >> + # we want to ensure that dpdk_version and compiler_version is reset for new >> + # build targets >> + self._dpdk_version = None >> + self._compiler_version = None >> self._configure_build_target(build_target_config) >> self._copy_dpdk_tarball() >> self._build_dpdk() >> @@ -262,48 +355,37 @@ def run_dpdk_app( >> f"{app_path} {eal_args}", timeout, verify=True >> ) >> >> - >> -class EalParameters(object): >> - def __init__( >> + def create_interactive_shell( >> self, >> - lcore_list: LogicalCoreList, >> - memory_channels: int, >> - prefix: str, >> - no_pci: bool, >> - vdevs: list[VirtualDevice], >> - other_eal_param: str, >> - ): >> + shell_type: InteractiveApp, >> + timeout: float = SETTINGS.timeout, >> + eal_parameters: EalParameters | None = None, >> + ) -> Union[InteractiveShell, TestPmdShell]: >> + """Create a handler for an interactive session. >> + >> + This method is a factory that calls a method in OSSession to create shells for >> + different DPDK applications. >> + >> + Args: >> + shell_type: Enum value representing the desired application. >> + timeout: Timeout for reading output from the SSH channel. If you are >> + reading from the buffer and don't receive any data within the timeout >> + it will throw an error. >> + eal_parameters: List of EAL parameters to use to launch the app. If this >> + isn't provided, it will default to calling create_eal_parameters(). >> + This is ignored for base "shell" types. >> + Returns: >> + Instance of the desired interactive application. >> """ >> - Generate eal parameters character string; >> - :param lcore_list: the list of logical cores to use. >> - :param memory_channels: the number of memory channels to use. >> - :param prefix: set file prefix string, eg: >> - prefix='vf' >> - :param no_pci: switch of disable PCI bus eg: >> - no_pci=True >> - :param vdevs: virtual device list, eg: >> - vdevs=[ >> - VirtualDevice('net_ring0'), >> - VirtualDevice('net_ring1') >> - ] >> - :param other_eal_param: user defined DPDK eal parameters, eg: >> - other_eal_param='--single-file-segments' >> - """ >> - self._lcore_list = f"-l {lcore_list}" >> - self._memory_channels = f"-n {memory_channels}" >> - self._prefix = prefix >> - if prefix: >> - self._prefix = f"--file-prefix={prefix}" >> - self._no_pci = "--no-pci" if no_pci else "" >> - self._vdevs = " ".join(f"--vdev {vdev}" for vdev in vdevs) >> - self._other_eal_param = other_eal_param >> - >> - def __str__(self) -> str: >> - return ( >> - f"{self._lcore_list} " >> - f"{self._memory_channels} " >> - f"{self._prefix} " >> - f"{self._no_pci} " >> - f"{self._vdevs} " >> - f"{self._other_eal_param}" >> + if not eal_parameters: >> + eal_parameters = self.create_eal_parameters() >> + >> + # We need to append the build directory for DPDK apps >> + shell_type.path = self.remote_dpdk_build_dir.joinpath(shell_type.path) >> + default_path = self.main_session.join_remote_path(shell_type.path) >> + return self.main_session.create_interactive_shell( >> + shell_type, >> + default_path, >> + str(eal_parameters), >> + timeout, >> ) >> diff --git a/dts/framework/utils.py b/dts/framework/utils.py >> index 55e0b0ef..2ee67145 100644 >> --- a/dts/framework/utils.py >> +++ b/dts/framework/utils.py >> @@ -5,6 +5,8 @@ >> >> import sys >> >> +REGEX_FOR_PCI_ADDRESS = "/[0-9a-fA-F]{4}:[0-9a-fA-F]{2}:[0-9a-fA-F]{2}.[0-9]{1}/" >> + >> >> def check_dts_python_version() -> None: >> if sys.version_info.major < 3 or ( >> diff --git a/dts/tests/TestSuite_smoke_tests.py b/dts/tests/TestSuite_smoke_tests.py >> new file mode 100644 >> index 00000000..9cf54720 >> --- /dev/null >> +++ b/dts/tests/TestSuite_smoke_tests.py >> @@ -0,0 +1,113 @@ >> +# SPDX-License-Identifier: BSD-3-Clause >> +# Copyright(c) 2023 University of New Hampshire >> + >> +import re >> + >> +from framework.config import InteractiveApp, PortConfig >> +from framework.remote_session import TestPmdDevice, TestPmdShell >> +from framework.settings import SETTINGS >> +from framework.test_suite import TestSuite >> +from framework.utils import REGEX_FOR_PCI_ADDRESS >> + >> + >> +class SmokeTests(TestSuite): >> + is_blocking = True >> + # dicts in this list are expected to have two keys: >> + # "pci_address" and "current_driver" >> + nics_in_node: list[PortConfig] = [] >> + >> + def set_up_suite(self) -> None: >> + """ >> + Setup: >> + Set the build directory path and generate a list of NICs in the SUT node. >> + """ >> + self.dpdk_build_dir_path = self.sut_node.remote_dpdk_build_dir >> + self.nics_in_node = self.sut_node.config.ports >> + >> + def test_unit_tests(self) -> None: >> + """ >> + Test: >> + Run the fast-test unit-test suite through meson. >> + """ >> + self.sut_node.main_session.send_command( >> + f"meson test -C {self.dpdk_build_dir_path} --suite fast-tests", >> + 300, >> + verify=True, >> + ) >> + >> + def test_driver_tests(self) -> None: >> + """ >> + Test: >> + Run the driver-test unit-test suite through meson. >> + """ >> + list_of_vdevs = "" >> + for dev in self.sut_node._execution_config.vdevs: >> + list_of_vdevs += f"--vdev {dev} " >> + list_of_vdevs = list_of_vdevs[:-1] >> + if list_of_vdevs: >> + self._logger.info( >> + "Running driver tests with the following virtual " >> + f"devices: {list_of_vdevs}" >> + ) >> + self.sut_node.main_session.send_command( >> + f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests " >> + f'--test-args "{list_of_vdevs}"', >> + 300, >> + verify=True, >> + ) >> + else: >> + self.sut_node.main_session.send_command( >> + f"meson test -C {self.dpdk_build_dir_path} --suite driver-tests", >> + 300, >> + verify=True, >> + ) >> + >> + def test_devices_listed_in_testpmd(self) -> None: >> + """ >> + Test: >> + Uses testpmd driver to verify that devices have been found by testpmd. >> + """ >> + testpmd_driver = self.sut_node.create_interactive_shell(InteractiveApp.testpmd) >> + # We know it should always be a TestPmdShell but mypy doesn't >> + assert isinstance(testpmd_driver, TestPmdShell) >> + dev_list: list[TestPmdDevice] = testpmd_driver.get_devices() >> + for nic in self.nics_in_node: >> + self.verify( >> + nic.pci in map(str, dev_list), >> + f"Device {nic.pci} was not listed in testpmd's available devices, " >> + "please check your configuration", >> + ) >> + >> + def test_device_bound_to_driver(self) -> None: >> + """ >> + Test: >> + Ensure that all drivers listed in the config are bound to the correct driver. >> + """ >> + path_to_devbind = self.sut_node.main_session.join_remote_path( >> + self.sut_node._remote_dpdk_dir, "usertools", "dpdk-devbind.py" >> + ) >> + >> + all_nics_in_dpdk_devbind = self.sut_node.main_session.send_command( >> + f"{path_to_devbind} --status | awk '{REGEX_FOR_PCI_ADDRESS}'", >> + SETTINGS.timeout, >> + ).stdout >> + >> + for nic in self.nics_in_node: >> + # This regular expression finds the line in the above string that starts >> + # with the address for the nic we are on in the loop and then captures the >> + # name of the driver in a group >> + devbind_info_for_nic = re.search( >> + f"{nic.pci}[^\\n]*drv=([\\d\\w]*) [^\\n]*", >> + all_nics_in_dpdk_devbind, >> + ) >> + self.verify( >> + devbind_info_for_nic is not None, >> + f"Failed to find configured device ({nic.pci}) using dpdk-devbind.py", >> + ) >> + # We know this isn't None, but mypy doesn't >> + assert devbind_info_for_nic is not None >> + self.verify( >> + devbind_info_for_nic.group(1) == nic.os_driver, >> + f"Driver for device {nic.pci} does not match driver listed in " >> + f"configuration (bound to {devbind_info_for_nic.group(1)})", >> + ) >> -- >> 2.41.0 >> ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v5 2/2] dts: add paramiko to dependencies 2023-07-12 19:17 [PATCH v5 0/2] Add DTS smoke tests jspewock 2023-07-12 19:18 ` [PATCH v5 1/2] dts: add " jspewock @ 2023-07-12 19:18 ` jspewock 1 sibling, 0 replies; 5+ messages in thread From: jspewock @ 2023-07-12 19:18 UTC (permalink / raw) To: Honnappa.Nagarahalli, juraj.linkes, thomas, lijuan.tu, wathsala.vithanage, probb Cc: dev, Jeremy Spewock From: Jeremy Spewock <jspewock@iol.unh.edu> added paramiko to the dependency files Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu> --- dts/poetry.lock | 160 ++++++++++++++++++++++++++++++++++----------- dts/pyproject.toml | 1 + 2 files changed, 124 insertions(+), 37 deletions(-) diff --git a/dts/poetry.lock b/dts/poetry.lock index 0b2a007d..dfd9a240 100644 --- a/dts/poetry.lock +++ b/dts/poetry.lock @@ -1,20 +1,33 @@ [[package]] name = "attrs" -version = "22.1.0" +version = "23.1.0" description = "Classes Without Boilerplate" category = "main" optional = false -python-versions = ">=3.5" +python-versions = ">=3.7" [package.extras] -dev = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "mypy (>=0.900,!=0.940)", "pytest-mypy-plugins", "zope.interface", "furo", "sphinx", "sphinx-notfound-page", "pre-commit", "cloudpickle"] -docs = ["furo", "sphinx", "zope.interface", "sphinx-notfound-page"] -tests = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "mypy (>=0.900,!=0.940)", "pytest-mypy-plugins", "zope.interface", "cloudpickle"] -tests_no_zope = ["coverage[toml] (>=5.0.2)", "hypothesis", "pympler", "pytest (>=4.3.0)", "mypy (>=0.900,!=0.940)", "pytest-mypy-plugins", "cloudpickle"] +cov = ["attrs", "coverage[toml] (>=5.3)"] +dev = ["attrs", "pre-commit"] +docs = ["furo", "myst-parser", "sphinx", "sphinx-notfound-page", "sphinxcontrib-towncrier", "towncrier", "zope-interface"] +tests = ["attrs", "zope-interface"] +tests-no-zope = ["cloudpickle", "hypothesis", "mypy (>=1.1.1)", "pympler", "pytest-mypy-plugins", "pytest-xdist", "pytest (>=4.3.0)"] + +[[package]] +name = "bcrypt" +version = "4.0.1" +description = "Modern password hashing for your software and your servers" +category = "main" +optional = false +python-versions = ">=3.6" + +[package.extras] +tests = ["pytest (>=3.2.1,!=3.3.0)"] +typecheck = ["mypy"] [[package]] name = "black" -version = "22.10.0" +version = "22.12.0" description = "The uncompromising code formatter." category = "dev" optional = false @@ -33,6 +46,17 @@ d = ["aiohttp (>=3.7.4)"] jupyter = ["ipython (>=7.8.0)", "tokenize-rt (>=3.2.0)"] uvloop = ["uvloop (>=0.15.2)"] +[[package]] +name = "cffi" +version = "1.15.1" +description = "Foreign Function Interface for Python calling C code." +category = "main" +optional = false +python-versions = "*" + +[package.dependencies] +pycparser = "*" + [[package]] name = "click" version = "8.1.3" @@ -52,18 +76,39 @@ category = "dev" optional = false python-versions = "!=3.0.*,!=3.1.*,!=3.2.*,!=3.3.*,!=3.4.*,!=3.5.*,!=3.6.*,>=2.7" +[[package]] +name = "cryptography" +version = "41.0.1" +description = "cryptography is a package which provides cryptographic recipes and primitives to Python developers." +category = "main" +optional = false +python-versions = ">=3.7" + +[package.dependencies] +cffi = ">=1.12" + +[package.extras] +docs = ["sphinx (>=5.3.0)", "sphinx-rtd-theme (>=1.1.1)"] +docstest = ["pyenchant (>=1.6.11)", "twine (>=1.12.0)", "sphinxcontrib-spelling (>=4.0.1)"] +nox = ["nox"] +pep8test = ["black", "ruff", "mypy", "check-sdist"] +sdist = ["build"] +ssh = ["bcrypt (>=3.1.5)"] +test = ["pytest (>=6.2.0)", "pytest-benchmark", "pytest-cov", "pytest-xdist", "pretend"] +test-randomorder = ["pytest-randomly"] + [[package]] name = "isort" -version = "5.10.1" +version = "5.12.0" description = "A Python utility / library to sort Python imports." category = "dev" optional = false -python-versions = ">=3.6.1,<4.0" +python-versions = ">=3.8.0" [package.extras] -pipfile_deprecated_finder = ["pipreqs", "requirementslib"] -requirements_deprecated_finder = ["pipreqs", "pip-api"] -colors = ["colorama (>=0.4.3,<0.5.0)"] +colors = ["colorama (>=0.4.3)"] +requirements-deprecated-finder = ["pip-api", "pipreqs"] +pipfile-deprecated-finder = ["pip-shims (>=0.5.2)", "pipreqs", "requirementslib"] plugins = ["setuptools"] [[package]] @@ -87,7 +132,7 @@ python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*" [[package]] name = "jsonschema" -version = "4.17.0" +version = "4.17.3" description = "An implementation of JSON Schema validation for Python" category = "main" optional = false @@ -129,15 +174,33 @@ reports = ["lxml"] [[package]] name = "mypy-extensions" -version = "0.4.3" -description = "Experimental type system extensions for programs checked with the mypy typechecker." +version = "1.0.0" +description = "Type system extensions for programs checked with the mypy type checker." category = "dev" optional = false -python-versions = "*" +python-versions = ">=3.5" + +[[package]] +name = "paramiko" +version = "3.2.0" +description = "SSH2 protocol library" +category = "main" +optional = false +python-versions = ">=3.6" + +[package.dependencies] +bcrypt = ">=3.2" +cryptography = ">=3.3" +pynacl = ">=1.5" + +[package.extras] +all = ["pyasn1 (>=0.1.7)", "invoke (>=2.0)", "gssapi (>=1.4.1)", "pywin32 (>=2.1.8)"] +gssapi = ["pyasn1 (>=0.1.7)", "gssapi (>=1.4.1)", "pywin32 (>=2.1.8)"] +invoke = ["invoke (>=2.0)"] [[package]] name = "pathspec" -version = "0.10.1" +version = "0.11.1" description = "Utility library for gitignore style pattern matching of file paths." category = "dev" optional = false @@ -156,15 +219,15 @@ ptyprocess = ">=0.5" [[package]] name = "platformdirs" -version = "2.5.2" -description = "A small Python module for determining appropriate platform-specific dirs, e.g. a \"user data dir\"." +version = "3.5.1" +description = "A small Python package for determining appropriate platform-specific dirs, e.g. a \"user data dir\"." category = "dev" optional = false python-versions = ">=3.7" [package.extras] -docs = ["furo (>=2021.7.5b38)", "proselint (>=0.10.2)", "sphinx-autodoc-typehints (>=1.12)", "sphinx (>=4)"] -test = ["appdirs (==1.4.4)", "pytest-cov (>=2.7)", "pytest-mock (>=3.6)", "pytest (>=6)"] +docs = ["furo (>=2023.3.27)", "proselint (>=0.13)", "sphinx-autodoc-typehints (>=1.23,!=1.23.4)", "sphinx (>=6.2.1)"] +test = ["appdirs (==1.4.4)", "covdefaults (>=2.3)", "pytest-cov (>=4)", "pytest-mock (>=3.10)", "pytest (>=7.3.1)"] [[package]] name = "ptyprocess" @@ -176,25 +239,33 @@ python-versions = "*" [[package]] name = "pycodestyle" -version = "2.9.1" +version = "2.10.0" description = "Python style guide checker" category = "dev" optional = false python-versions = ">=3.6" +[[package]] +name = "pycparser" +version = "2.21" +description = "C parser in Python" +category = "main" +optional = false +python-versions = ">=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*" + [[package]] name = "pydocstyle" -version = "6.1.1" +version = "6.3.0" description = "Python docstring style checker" category = "dev" optional = false python-versions = ">=3.6" [package.dependencies] -snowballstemmer = "*" +snowballstemmer = ">=2.2.0" [package.extras] -toml = ["toml"] +toml = ["tomli (>=1.2.3)"] [[package]] name = "pyflakes" @@ -228,9 +299,24 @@ tests = ["pytest (>=7.1.2)", "pytest-mypy", "eradicate (>=2.0.0)", "radon (>=5.1 toml = ["toml (>=0.10.2)"] vulture = ["vulture"] +[[package]] +name = "pynacl" +version = "1.5.0" +description = "Python binding to the Networking and Cryptography (NaCl) library" +category = "main" +optional = false +python-versions = ">=3.6" + +[package.dependencies] +cffi = ">=1.4.1" + +[package.extras] +docs = ["sphinx (>=1.6.5)", "sphinx-rtd-theme"] +tests = ["pytest (>=3.2.1,!=3.3.0)", "hypothesis (>=3.27.0)"] + [[package]] name = "pyrsistent" -version = "0.19.1" +version = "0.19.3" description = "Persistent/Functional/Immutable data structures" category = "main" optional = false @@ -270,7 +356,7 @@ python-versions = ">=3.7" [[package]] name = "types-pyyaml" -version = "6.0.12.1" +version = "6.0.12.10" description = "Typing stubs for PyYAML" category = "main" optional = false @@ -278,7 +364,7 @@ python-versions = "*" [[package]] name = "typing-extensions" -version = "4.4.0" +version = "4.6.2" description = "Backported and Experimental Type Hints for Python 3.7+" category = "dev" optional = false @@ -299,13 +385,16 @@ jsonschema = ">=4,<5" [metadata] lock-version = "1.1" python-versions = "^3.10" -content-hash = "a0f040b07fc6ce4deb0be078b9a88c2a465cb6bccb9e260a67e92c2403e2319f" +content-hash = "c119901b1c13b14adf9b53624430aff8720d9a3a180b028579b82c65d49474df" [metadata.files] attrs = [] +bcrypt = [] black = [] +cffi = [] click = [] colorama = [] +cryptography = [] isort = [] jsonpatch = [] jsonpointer = [] @@ -313,20 +402,17 @@ jsonschema = [] mccabe = [] mypy = [] mypy-extensions = [] +paramiko = [] pathspec = [] -pexpect = [ - {file = "pexpect-4.8.0-py2.py3-none-any.whl", hash = "sha256:0b48a55dcb3c05f3329815901ea4fc1537514d6ba867a152b581d69ae3710937"}, - {file = "pexpect-4.8.0.tar.gz", hash = "sha256:fc65a43959d153d0114afe13997d439c22823a27cefceb5ff35c2178c6784c0c"}, -] -platformdirs = [ - {file = "platformdirs-2.5.2-py3-none-any.whl", hash = "sha256:027d8e83a2d7de06bbac4e5ef7e023c02b863d7ea5d079477e722bb41ab25788"}, - {file = "platformdirs-2.5.2.tar.gz", hash = "sha256:58c8abb07dcb441e6ee4b11d8df0ac856038f944ab98b7be6b27b2a3c7feef19"}, -] +pexpect = [] +platformdirs = [] ptyprocess = [] pycodestyle = [] +pycparser = [] pydocstyle = [] pyflakes = [] pylama = [] +pynacl = [] pyrsistent = [] pyyaml = [] snowballstemmer = [] diff --git a/dts/pyproject.toml b/dts/pyproject.toml index a136c91e..928837cb 100644 --- a/dts/pyproject.toml +++ b/dts/pyproject.toml @@ -13,6 +13,7 @@ pexpect = "^4.8.0" warlock = "^2.0.1" PyYAML = "^6.0" types-PyYAML = "^6.0.8" +paramiko = "^3.1.0" [tool.poetry.dev-dependencies] mypy = "^0.961" -- 2.41.0 ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-07-13 5:46 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-07-12 19:17 [PATCH v5 0/2] Add DTS smoke tests jspewock 2023-07-12 19:18 ` [PATCH v5 1/2] dts: add " jspewock 2023-07-12 20:00 ` Jeremy Spewock 2023-07-13 5:46 ` Juraj Linkeš 2023-07-12 19:18 ` [PATCH v5 2/2] dts: add paramiko to dependencies jspewock
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).