From: Huisong Li <lihuisong@huawei.com>
To: <dev@dpdk.org>
Cc: <thomas@monjalon.net>, <ferruh.yigit@intel.com>,
<aman.deep.singh@intel.com>, <yuying.zhang@intel.com>,
<zhichaox.zeng@intel.com>, <lihuisong@huawei.com>
Subject: [PATCH] app/testpmd: fix UDP cksum error for UFO enable
Date: Fri, 28 Jul 2023 10:13:10 +0800 [thread overview]
Message-ID: <20230728021310.15970-1-lihuisong@huawei.com> (raw)
The command "tso set <tso_segsz> <port_id>" is used to enable UFO, please
see commit ce8e6e742807 ("app/testpmd: support UFO in checksum engine")
The above patch configures the RTE_MBUF_F_TX_UDP_SEG to enable UFO only if
tso_segsz is set. Then tx_prepare() may call rte_net_intel_cksum_prepare()
to compute pseudo header checksum (because some PMDs may supports TSO).
As a result, if the peer sends UDP packets, all packets with UDP checksum
error are received for the PMDs only supported TSO.
So enabling UFO also depends on if driver has RTE_ETH_TX_OFFLOAD_UDP_TSO
capability. Similarly, TSO also need to do like this.
In addition, this patch also fixes cmd_tso_set_parsed() for UFO to make
it better to support TSO and UFO.
Fixes: ce8e6e742807 ("app/testpmd: support UFO in checksum engine")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
---
app/test-pmd/cmdline.c | 47 +++++++++++++++++++++--------------------
app/test-pmd/csumonly.c | 4 ++--
2 files changed, 26 insertions(+), 25 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0d0723f659..8be593d405 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -4906,6 +4906,7 @@ cmd_tso_set_parsed(void *parsed_result,
{
struct cmd_tso_set_result *res = parsed_result;
struct rte_eth_dev_info dev_info;
+ uint64_t offloads;
int ret;
if (port_id_is_invalid(res->port_id, ENABLED_WARN))
@@ -4922,37 +4923,37 @@ cmd_tso_set_parsed(void *parsed_result,
if (ret != 0)
return;
- if ((ports[res->port_id].tso_segsz != 0) &&
- (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_TCP_TSO) == 0) {
- fprintf(stderr, "Error: TSO is not supported by port %d\n",
- res->port_id);
- return;
+ if (ports[res->port_id].tso_segsz != 0) {
+ if ((dev_info.tx_offload_capa & (RTE_ETH_TX_OFFLOAD_TCP_TSO |
+ RTE_ETH_TX_OFFLOAD_UDP_TSO)) == 0) {
+ fprintf(stderr, "Error: both TSO and UFO are not supported by port %d\n",
+ res->port_id);
+ return;
+ }
+ /* display warnings if configuration is not supported by the NIC */
+ if ((dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_TCP_TSO) == 0)
+ fprintf(stderr, "Warning: port %d doesn't support TSO\n",
+ res->port_id);
+ if ((dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_UDP_TSO) == 0)
+ fprintf(stderr, "Warning: port %d doesn't support UFO\n",
+ res->port_id);
}
if (ports[res->port_id].tso_segsz == 0) {
ports[res->port_id].dev_conf.txmode.offloads &=
- ~RTE_ETH_TX_OFFLOAD_TCP_TSO;
- printf("TSO for non-tunneled packets is disabled\n");
+ ~(RTE_ETH_TX_OFFLOAD_TCP_TSO | RTE_ETH_TX_OFFLOAD_UDP_TSO);
+ printf("TSO and UFO for non-tunneled packets is disabled\n");
} else {
- ports[res->port_id].dev_conf.txmode.offloads |=
- RTE_ETH_TX_OFFLOAD_TCP_TSO;
- printf("TSO segment size for non-tunneled packets is %d\n",
+ offloads = (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_TCP_TSO) ?
+ RTE_ETH_TX_OFFLOAD_TCP_TSO : 0;
+ offloads |= (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_UDP_TSO) ?
+ RTE_ETH_TX_OFFLOAD_UDP_TSO : 0;
+ ports[res->port_id].dev_conf.txmode.offloads |= offloads;
+ printf("segment size for non-tunneled packets is %d\n",
ports[res->port_id].tso_segsz);
}
- cmd_config_queue_tx_offloads(&ports[res->port_id]);
-
- /* display warnings if configuration is not supported by the NIC */
- ret = eth_dev_info_get_print_err(res->port_id, &dev_info);
- if (ret != 0)
- return;
-
- if ((ports[res->port_id].tso_segsz != 0) &&
- (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_TCP_TSO) == 0) {
- fprintf(stderr,
- "Warning: TSO enabled but not supported by port %d\n",
- res->port_id);
- }
+ cmd_config_queue_tx_offloads(&ports[res->port_id]);
cmd_reconfig_device_queue(res->port_id, 1, 1);
}
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index c103e54111..0c007bd178 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -505,7 +505,7 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
udp_hdr = (struct rte_udp_hdr *)((char *)l3_hdr + info->l3_len);
/* do not recalculate udp cksum if it was 0 */
if (udp_hdr->dgram_cksum != 0) {
- if (tso_segsz)
+ if (tso_segsz && (tx_offloads & RTE_ETH_TX_OFFLOAD_UDP_TSO))
ol_flags |= RTE_MBUF_F_TX_UDP_SEG;
else if (tx_offloads & RTE_ETH_TX_OFFLOAD_UDP_CKSUM) {
ol_flags |= RTE_MBUF_F_TX_UDP_CKSUM;
@@ -528,7 +528,7 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
#endif
} else if (info->l4_proto == IPPROTO_TCP) {
tcp_hdr = (struct rte_tcp_hdr *)((char *)l3_hdr + info->l3_len);
- if (tso_segsz)
+ if (tso_segsz && (tx_offloads & RTE_ETH_TX_OFFLOAD_TCP_TSO))
ol_flags |= RTE_MBUF_F_TX_TCP_SEG;
else if (tx_offloads & RTE_ETH_TX_OFFLOAD_TCP_CKSUM) {
ol_flags |= RTE_MBUF_F_TX_TCP_CKSUM;
--
2.33.0
next reply other threads:[~2023-07-28 2:15 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-28 2:13 Huisong Li [this message]
2023-08-02 2:55 ` [PATCH v2] " Huisong Li
2023-10-20 3:38 ` lihuisong (C)
2023-10-27 6:15 ` fengchengwen
2023-11-03 1:31 ` Ferruh Yigit
2023-11-03 9:09 ` lihuisong (C)
2023-11-03 10:42 ` Ferruh Yigit
2023-11-06 4:13 ` lihuisong (C)
2023-11-06 10:09 ` Ferruh Yigit
2023-11-06 12:29 ` lihuisong (C)
2023-11-07 4:11 ` [PATCH v3 0/2] " Huisong Li
2023-11-07 4:11 ` [PATCH v3 1/2] app/testpmd: remove useless code for TSO setting command Huisong Li
2023-11-07 4:11 ` [PATCH v3 2/2] app/testpmd: fix UDP cksum error for UFO enable Huisong Li
2023-11-07 9:54 ` [PATCH v3 0/2] " Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230728021310.15970-1-lihuisong@huawei.com \
--to=lihuisong@huawei.com \
--cc=aman.deep.singh@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=thomas@monjalon.net \
--cc=yuying.zhang@intel.com \
--cc=zhichaox.zeng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).