From: Nicolas Chautru <nicolas.chautru@intel.com>
To: dev@dpdk.org, maxime.coquelin@redhat.com
Cc: hemant.agrawal@nxp.com, david.marchand@redhat.com,
hernan.vargas@intel.com,
Nicolas Chautru <nicolas.chautru@intel.com>
Subject: [PATCH v3 09/12] baseband/acc: add FFT support to VRB2 variant
Date: Fri, 29 Sep 2023 16:35:13 +0000 [thread overview]
Message-ID: <20230929163516.3636499-10-nicolas.chautru@intel.com> (raw)
In-Reply-To: <20230929163516.3636499-1-nicolas.chautru@intel.com>
Support for the FFT the processing specific to the
VRB2 variant.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
drivers/baseband/acc/rte_vrb_pmd.c | 132 ++++++++++++++++++++++++++++-
1 file changed, 128 insertions(+), 4 deletions(-)
diff --git a/drivers/baseband/acc/rte_vrb_pmd.c b/drivers/baseband/acc/rte_vrb_pmd.c
index 93add82947..ce4b90d8e7 100644
--- a/drivers/baseband/acc/rte_vrb_pmd.c
+++ b/drivers/baseband/acc/rte_vrb_pmd.c
@@ -903,6 +903,9 @@ vrb_queue_setup(struct rte_bbdev *dev, uint16_t queue_id,
ACC_FCW_LD_BLEN : (conf->op_type == RTE_BBDEV_OP_FFT ?
ACC_FCW_FFT_BLEN : ACC_FCW_MLDTS_BLEN))));
+ if ((q->d->device_variant == VRB2_VARIANT) && (conf->op_type == RTE_BBDEV_OP_FFT))
+ fcw_len = ACC_FCW_FFT_BLEN_3;
+
for (desc_idx = 0; desc_idx < d->sw_ring_max_depth; desc_idx++) {
desc = q->ring_addr + desc_idx;
desc->req.word0 = ACC_DMA_DESC_TYPE;
@@ -1323,6 +1326,24 @@ vrb_dev_info_get(struct rte_bbdev *dev, struct rte_bbdev_driver_info *dev_info)
.num_buffers_soft_out = 0,
}
},
+ {
+ .type = RTE_BBDEV_OP_FFT,
+ .cap.fft = {
+ .capability_flags =
+ RTE_BBDEV_FFT_WINDOWING |
+ RTE_BBDEV_FFT_CS_ADJUSTMENT |
+ RTE_BBDEV_FFT_DFT_BYPASS |
+ RTE_BBDEV_FFT_IDFT_BYPASS |
+ RTE_BBDEV_FFT_FP16_INPUT |
+ RTE_BBDEV_FFT_FP16_OUTPUT |
+ RTE_BBDEV_FFT_POWER_MEAS |
+ RTE_BBDEV_FFT_WINDOWING_BYPASS,
+ .num_buffers_src =
+ 1,
+ .num_buffers_dst =
+ 1,
+ }
+ },
RTE_BBDEV_END_OF_CAPABILITIES_LIST()
};
@@ -3849,6 +3870,47 @@ vrb1_fcw_fft_fill(struct rte_bbdev_fft_op *op, struct acc_fcw_fft *fcw)
fcw->bypass = 0;
}
+/* Fill in a frame control word for FFT processing. */
+static inline void
+vrb2_fcw_fft_fill(struct rte_bbdev_fft_op *op, struct acc_fcw_fft_3 *fcw)
+{
+ fcw->in_frame_size = op->fft.input_sequence_size;
+ fcw->leading_pad_size = op->fft.input_leading_padding;
+ fcw->out_frame_size = op->fft.output_sequence_size;
+ fcw->leading_depad_size = op->fft.output_leading_depadding;
+ fcw->cs_window_sel = op->fft.window_index[0] +
+ (op->fft.window_index[1] << 8) +
+ (op->fft.window_index[2] << 16) +
+ (op->fft.window_index[3] << 24);
+ fcw->cs_window_sel2 = op->fft.window_index[4] +
+ (op->fft.window_index[5] << 8);
+ fcw->cs_enable_bmap = op->fft.cs_bitmap;
+ fcw->num_antennas = op->fft.num_antennas_log2;
+ fcw->idft_size = op->fft.idft_log2;
+ fcw->dft_size = op->fft.dft_log2;
+ fcw->cs_offset = op->fft.cs_time_adjustment;
+ fcw->idft_shift = op->fft.idft_shift;
+ fcw->dft_shift = op->fft.dft_shift;
+ fcw->cs_multiplier = op->fft.ncs_reciprocal;
+ fcw->power_shift = op->fft.power_shift;
+ fcw->exp_adj = op->fft.fp16_exp_adjust;
+ fcw->fp16_in = check_bit(op->fft.op_flags, RTE_BBDEV_FFT_FP16_INPUT);
+ fcw->fp16_out = check_bit(op->fft.op_flags, RTE_BBDEV_FFT_FP16_OUTPUT);
+ fcw->power_en = check_bit(op->fft.op_flags, RTE_BBDEV_FFT_POWER_MEAS);
+ if (check_bit(op->fft.op_flags,
+ RTE_BBDEV_FFT_IDFT_BYPASS)) {
+ if (check_bit(op->fft.op_flags,
+ RTE_BBDEV_FFT_WINDOWING_BYPASS))
+ fcw->bypass = 2;
+ else
+ fcw->bypass = 1;
+ } else if (check_bit(op->fft.op_flags,
+ RTE_BBDEV_FFT_DFT_BYPASS))
+ fcw->bypass = 3;
+ else
+ fcw->bypass = 0;
+}
+
static inline int
vrb1_dma_desc_fft_fill(struct rte_bbdev_fft_op *op,
struct acc_dma_req_desc *desc,
@@ -3882,6 +3944,58 @@ vrb1_dma_desc_fft_fill(struct rte_bbdev_fft_op *op,
return 0;
}
+static inline int
+vrb2_dma_desc_fft_fill(struct rte_bbdev_fft_op *op,
+ struct acc_dma_req_desc *desc,
+ struct rte_mbuf *input, struct rte_mbuf *output, struct rte_mbuf *win_input,
+ struct rte_mbuf *pwr, uint32_t *in_offset, uint32_t *out_offset,
+ uint32_t *win_offset, uint32_t *pwr_offset)
+{
+ bool pwr_en = check_bit(op->fft.op_flags, RTE_BBDEV_FFT_POWER_MEAS);
+ bool win_en = check_bit(op->fft.op_flags, RTE_BBDEV_FFT_DEWINDOWING);
+ int num_cs = 0, i, bd_idx = 1;
+
+ /* FCW already done */
+ acc_header_init(desc);
+
+ RTE_SET_USED(win_input);
+ RTE_SET_USED(win_offset);
+
+ desc->data_ptrs[bd_idx].address = rte_pktmbuf_iova_offset(input, *in_offset);
+ desc->data_ptrs[bd_idx].blen = op->fft.input_sequence_size * ACC_IQ_SIZE;
+ desc->data_ptrs[bd_idx].blkid = ACC_DMA_BLKID_IN;
+ desc->data_ptrs[bd_idx].last = 1;
+ desc->data_ptrs[bd_idx].dma_ext = 0;
+ bd_idx++;
+
+ desc->data_ptrs[bd_idx].address = rte_pktmbuf_iova_offset(output, *out_offset);
+ desc->data_ptrs[bd_idx].blen = op->fft.output_sequence_size * ACC_IQ_SIZE;
+ desc->data_ptrs[bd_idx].blkid = ACC_DMA_BLKID_OUT_HARD;
+ desc->data_ptrs[bd_idx].last = pwr_en ? 0 : 1;
+ desc->data_ptrs[bd_idx].dma_ext = 0;
+ desc->m2dlen = win_en ? 3 : 2;
+ desc->d2mlen = pwr_en ? 2 : 1;
+ desc->ib_ant_offset = op->fft.input_sequence_size;
+ desc->num_ant = op->fft.num_antennas_log2 - 3;
+
+ for (i = 0; i < RTE_BBDEV_MAX_CS; i++)
+ if (check_bit(op->fft.cs_bitmap, 1 << i))
+ num_cs++;
+ desc->num_cs = num_cs;
+
+ if (pwr_en && pwr) {
+ bd_idx++;
+ desc->data_ptrs[bd_idx].address = rte_pktmbuf_iova_offset(pwr, *pwr_offset);
+ desc->data_ptrs[bd_idx].blen = num_cs * (1 << op->fft.num_antennas_log2) * 4;
+ desc->data_ptrs[bd_idx].blkid = ACC_DMA_BLKID_OUT_SOFT;
+ desc->data_ptrs[bd_idx].last = 1;
+ desc->data_ptrs[bd_idx].dma_ext = 0;
+ }
+ desc->ob_cyc_offset = op->fft.output_sequence_size;
+ desc->ob_ant_offset = op->fft.output_sequence_size * num_cs;
+ desc->op_addr = op;
+ return 0;
+}
/** Enqueue one FFT operation for device. */
static inline int
@@ -3889,22 +4003,32 @@ vrb_enqueue_fft_one_op(struct acc_queue *q, struct rte_bbdev_fft_op *op,
uint16_t total_enqueued_cbs)
{
union acc_dma_desc *desc;
- struct rte_mbuf *input, *output;
- uint32_t in_offset, out_offset;
+ struct rte_mbuf *input, *output, *pwr, *win;
+ uint32_t in_offset, out_offset, pwr_offset, win_offset;
struct acc_fcw_fft *fcw;
desc = acc_desc(q, total_enqueued_cbs);
input = op->fft.base_input.data;
output = op->fft.base_output.data;
+ pwr = op->fft.power_meas_output.data;
+ win = op->fft.dewindowing_input.data;
in_offset = op->fft.base_input.offset;
out_offset = op->fft.base_output.offset;
+ pwr_offset = op->fft.power_meas_output.offset;
+ win_offset = op->fft.dewindowing_input.offset;
fcw = (struct acc_fcw_fft *) (q->fcw_ring +
((q->sw_ring_head + total_enqueued_cbs) & q->sw_ring_wrap_mask)
* ACC_MAX_FCW_SIZE);
- vrb1_fcw_fft_fill(op, fcw);
- vrb1_dma_desc_fft_fill(op, &desc->req, input, output, &in_offset, &out_offset);
+ if (q->d->device_variant == VRB1_VARIANT) {
+ vrb1_fcw_fft_fill(op, fcw);
+ vrb1_dma_desc_fft_fill(op, &desc->req, input, output, &in_offset, &out_offset);
+ } else {
+ vrb2_fcw_fft_fill(op, (struct acc_fcw_fft_3 *) fcw);
+ vrb2_dma_desc_fft_fill(op, &desc->req, input, output, win, pwr,
+ &in_offset, &out_offset, &win_offset, &pwr_offset);
+ }
#ifdef RTE_LIBRTE_BBDEV_DEBUG
rte_memdump(stderr, "FCW", &desc->req.fcw_fft,
sizeof(desc->req.fcw_fft));
--
2.34.1
next prev parent reply other threads:[~2023-09-29 16:38 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-29 16:35 [PATCH v3 00/12] VRB2 bbdev PMD introduction Nicolas Chautru
2023-09-29 16:35 ` [PATCH v3 01/12] bbdev: add FFT window width member in driver info Nicolas Chautru
2023-09-29 16:35 ` [PATCH v3 02/12] baseband/acc: add FFT window width in the VRB PMD Nicolas Chautru
2023-10-03 11:52 ` Maxime Coquelin
2023-10-03 19:06 ` Chautru, Nicolas
2023-10-04 7:55 ` Maxime Coquelin
2023-09-29 16:35 ` [PATCH v3 03/12] baseband/acc: remove the 4G SO capability for VRB1 Nicolas Chautru
2023-10-03 12:04 ` Maxime Coquelin
2023-09-29 16:35 ` [PATCH v3 04/12] baseband/acc: allocate FCW memory separately Nicolas Chautru
2023-10-03 12:51 ` Maxime Coquelin
2023-09-29 16:35 ` [PATCH v3 05/12] baseband/acc: add support for MLD operation Nicolas Chautru
2023-09-29 16:35 ` [PATCH v3 06/12] baseband/acc: refactor to allow unified driver extension Nicolas Chautru
2023-10-03 13:14 ` Maxime Coquelin
2023-10-03 18:54 ` Chautru, Nicolas
2023-10-04 7:35 ` Maxime Coquelin
2023-10-04 21:28 ` Chautru, Nicolas
2023-10-05 14:31 ` Maxime Coquelin
2023-10-05 15:00 ` Chautru, Nicolas
2023-09-29 16:35 ` [PATCH v3 07/12] baseband/acc: adding VRB2 device variant Nicolas Chautru
2023-10-03 13:41 ` Maxime Coquelin
2023-09-29 16:35 ` [PATCH v3 08/12] baseband/acc: add FEC capabilities for the VRB2 variant Nicolas Chautru
2023-10-03 14:28 ` Maxime Coquelin
2023-10-04 21:11 ` Chautru, Nicolas
2023-10-05 14:36 ` Maxime Coquelin
2023-09-29 16:35 ` Nicolas Chautru [this message]
2023-10-03 14:36 ` [PATCH v3 09/12] baseband/acc: add FFT support to " Maxime Coquelin
2023-10-03 18:20 ` Chautru, Nicolas
2023-10-04 7:11 ` Maxime Coquelin
2023-10-04 21:18 ` Chautru, Nicolas
2023-10-05 14:34 ` Maxime Coquelin
2023-10-05 17:59 ` Chautru, Nicolas
2023-10-06 12:05 ` Maxime Coquelin
2023-10-06 20:25 ` Chautru, Nicolas
2023-09-29 16:35 ` [PATCH v3 10/12] baseband/acc: add MLD support in " Nicolas Chautru
2023-10-03 15:12 ` Maxime Coquelin
2023-10-03 18:12 ` Chautru, Nicolas
2023-09-29 16:35 ` [PATCH v3 11/12] baseband/acc: add support for VRB2 engine error detection Nicolas Chautru
2023-10-03 15:16 ` Maxime Coquelin
2023-10-03 17:22 ` Chautru, Nicolas
2023-10-03 17:26 ` Maxime Coquelin
2023-09-29 16:35 ` [PATCH v3 12/12] baseband/acc: add configure helper for VRB2 Nicolas Chautru
2023-10-03 15:30 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230929163516.3636499-10-nicolas.chautru@intel.com \
--to=nicolas.chautru@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=hernan.vargas@intel.com \
--cc=maxime.coquelin@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).