[PATCH] doc: remove confusing command to send patch

[PATCH] doc: remove confusing command to send patch

[Thomas Monjalon]

In the contributor guide, it was said that no need to Cc maintainers
for new additions, probably for new directories not having a maintainer.
There is no harm, and it is a good habit, to always Cc maintainers.

Remove this case as it can mislead to not Cc maintainers when needed.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
 doc/guides/contributing/patches.rst | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/doc/guides/contributing/patches.rst b/doc/guides/contributing/patches.rst
index e286d9e6d5..d114ceba2b 100644
--- a/doc/guides/contributing/patches.rst
+++ b/doc/guides/contributing/patches.rst
@@ -561,10 +561,6 @@ Script ``get-maintainer.sh`` can be used to select maintainers automatically::
 
   git send-email --to-cmd ./devtools/get-maintainer.sh --cc dev@dpdk.org 000*.patch
 
-New additions can be sent without a maintainer::
-
-   git send-email --to dev@dpdk.org 000*.patch
-
 You can test the emails by sending it to yourself or with the ``--dry-run`` option.
 
 If the patch is in relation to a previous email thread you can add it to the same thread using the Message ID::
-- 
2.42.0

Re: [PATCH] doc: remove confusing command to send patch

[fengchengwen]

Acked-by: Chengwen Feng <fengchengwen@huawei.com>

On 2023/10/11 0:26, Thomas Monjalon wrote:
> In the contributor guide, it was said that no need to Cc maintainers
> for new additions, probably for new directories not having a maintainer.
> There is no harm, and it is a good habit, to always Cc maintainers.
> 
> Remove this case as it can mislead to not Cc maintainers when needed.
> 
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> ---
>  doc/guides/contributing/patches.rst | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/doc/guides/contributing/patches.rst b/doc/guides/contributing/patches.rst
> index e286d9e6d5..d114ceba2b 100644
> --- a/doc/guides/contributing/patches.rst
> +++ b/doc/guides/contributing/patches.rst
> @@ -561,10 +561,6 @@ Script ``get-maintainer.sh`` can be used to select maintainers automatically::
>  
>    git send-email --to-cmd ./devtools/get-maintainer.sh --cc dev@dpdk.org 000*.patch
>  
> -New additions can be sent without a maintainer::
> -
> -   git send-email --to dev@dpdk.org 000*.patch
> -
>  You can test the emails by sending it to yourself or with the ``--dry-run`` option.
>  
>  If the patch is in relation to a previous email thread you can add it to the same thread using the Message ID::
> 

Re: [PATCH] doc: remove confusing command to send patch

[David Marchand]

On Tue, Oct 10, 2023 at 6:26 PM Thomas Monjalon <thomas@monjalon.net> wrote:
>
> In the contributor guide, it was said that no need to Cc maintainers
> for new additions, probably for new directories not having a maintainer.
> There is no harm, and it is a good habit, to always Cc maintainers.
>
> Remove this case as it can mislead to not Cc maintainers when needed.
>
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

I agree Cc: maintainers should be the default / recommended way of
sending patches.

Just to convince myself, adding some meson skeleton for a "plop"
library, adding an entry in the release notes and hooking in
lib/meson.build:
$ git show --stat
 doc/guides/rel_notes/release_23_11.rst | 4 ++++
 lib/meson.build                        | 1 +
 lib/plop/meson.build                   | 2 ++

$ ./devtools/get-maintainer.sh 0001-new-awesome-library.patch

In this case, it translates to an empty To: list if you follow the
example command line:
   git send-email --to-cmd ./devtools/get-maintainer.sh --cc
dev@dpdk.org 000*.patch

We could add a default list of recipients if no maintainer is found by
the script.
And the next question is who should be in that list..


-- 
David Marchand

Re: [PATCH] doc: remove confusing command to send patch

[Thomas Monjalon]

11/10/2023 09:30, David Marchand:
> On Tue, Oct 10, 2023 at 6:26 PM Thomas Monjalon <thomas@monjalon.net> wrote:
> >
> > In the contributor guide, it was said that no need to Cc maintainers
> > for new additions, probably for new directories not having a maintainer.
> > There is no harm, and it is a good habit, to always Cc maintainers.
> >
> > Remove this case as it can mislead to not Cc maintainers when needed.
> >
> > Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> 
> I agree Cc: maintainers should be the default / recommended way of
> sending patches.
> 
> Just to convince myself, adding some meson skeleton for a "plop"
> library, adding an entry in the release notes and hooking in
> lib/meson.build:
> $ git show --stat
>  doc/guides/rel_notes/release_23_11.rst | 4 ++++
>  lib/meson.build                        | 1 +
>  lib/plop/meson.build                   | 2 ++
> 
> $ ./devtools/get-maintainer.sh 0001-new-awesome-library.patch
> 
> In this case, it translates to an empty To: list if you follow the
> example command line:
>    git send-email --to-cmd ./devtools/get-maintainer.sh --cc
> dev@dpdk.org 000*.patch
> 
> We could add a default list of recipients if no maintainer is found by
> the script.
> And the next question is who should be in that list..

Or we can send to dev@dpdk.org, Cc maintainers.
This is what I do:
git send-email --to dev@dpdk.org --cc-cmd devtools/get-maintainer.sh

Re: [PATCH] doc: remove confusing command to send patch

[Bruce Richardson]

On Wed, Oct 11, 2023 at 10:03:07AM +0200, Thomas Monjalon wrote:
> 11/10/2023 09:30, David Marchand:
> > On Tue, Oct 10, 2023 at 6:26 PM Thomas Monjalon <thomas@monjalon.net> wrote:
> > >
> > > In the contributor guide, it was said that no need to Cc maintainers
> > > for new additions, probably for new directories not having a maintainer.
> > > There is no harm, and it is a good habit, to always Cc maintainers.
> > >
> > > Remove this case as it can mislead to not Cc maintainers when needed.
> > >
> > > Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> > 
> > I agree Cc: maintainers should be the default / recommended way of
> > sending patches.
> > 
> > Just to convince myself, adding some meson skeleton for a "plop"
> > library, adding an entry in the release notes and hooking in
> > lib/meson.build:
> > $ git show --stat
> >  doc/guides/rel_notes/release_23_11.rst | 4 ++++
> >  lib/meson.build                        | 1 +
> >  lib/plop/meson.build                   | 2 ++
> > 
> > $ ./devtools/get-maintainer.sh 0001-new-awesome-library.patch
> > 
> > In this case, it translates to an empty To: list if you follow the
> > example command line:
> >    git send-email --to-cmd ./devtools/get-maintainer.sh --cc
> > dev@dpdk.org 000*.patch
> > 
> > We could add a default list of recipients if no maintainer is found by
> > the script.
> > And the next question is who should be in that list..
> 
> Or we can send to dev@dpdk.org, Cc maintainers.
> This is what I do:
> git send-email --to dev@dpdk.org --cc-cmd devtools/get-maintainer.sh
> 
+1 for this, mainly on the basis of it being what I do too! :-)

Re: [PATCH] doc: remove confusing command to send patch

[Ferruh Yigit]

On 10/11/2023 9:30 AM, Bruce Richardson wrote:
> On Wed, Oct 11, 2023 at 10:03:07AM +0200, Thomas Monjalon wrote:
>> 11/10/2023 09:30, David Marchand:
>>> On Tue, Oct 10, 2023 at 6:26 PM Thomas Monjalon <thomas@monjalon.net> wrote:
>>>>
>>>> In the contributor guide, it was said that no need to Cc maintainers
>>>> for new additions, probably for new directories not having a maintainer.
>>>> There is no harm, and it is a good habit, to always Cc maintainers.
>>>>
>>>> Remove this case as it can mislead to not Cc maintainers when needed.
>>>>
>>>> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
>>>
>>> I agree Cc: maintainers should be the default / recommended way of
>>> sending patches.
>>>
>>> Just to convince myself, adding some meson skeleton for a "plop"
>>> library, adding an entry in the release notes and hooking in
>>> lib/meson.build:
>>> $ git show --stat
>>>  doc/guides/rel_notes/release_23_11.rst | 4 ++++
>>>  lib/meson.build                        | 1 +
>>>  lib/plop/meson.build                   | 2 ++
>>>
>>> $ ./devtools/get-maintainer.sh 0001-new-awesome-library.patch
>>>
>>> In this case, it translates to an empty To: list if you follow the
>>> example command line:
>>>    git send-email --to-cmd ./devtools/get-maintainer.sh --cc
>>> dev@dpdk.org 000*.patch
>>>
>>> We could add a default list of recipients if no maintainer is found by
>>> the script.
>>> And the next question is who should be in that list..
>>
>> Or we can send to dev@dpdk.org, Cc maintainers.
>> This is what I do:
>> git send-email --to dev@dpdk.org --cc-cmd devtools/get-maintainer.sh
>>
> +1 for this, mainly on the basis of it being what I do too! :-)
>

I am for "--to-cmd=./devtools/get-maintainer.sh --cc dev@dpdk.org"

To highlight response is expected from the maintainers, and community is
informed.

Also people may have filters to give higher priority to emails they are
in 'to' list, high priority is what we want from maintainers :)

Re: [PATCH] doc: remove confusing command to send patch

[Thomas Monjalon]

11/10/2023 10:41, Ferruh Yigit:
> On 10/11/2023 9:30 AM, Bruce Richardson wrote:
> > On Wed, Oct 11, 2023 at 10:03:07AM +0200, Thomas Monjalon wrote:
> >> 11/10/2023 09:30, David Marchand:
> >>> On Tue, Oct 10, 2023 at 6:26 PM Thomas Monjalon <thomas@monjalon.net> wrote:
> >>>>
> >>>> In the contributor guide, it was said that no need to Cc maintainers
> >>>> for new additions, probably for new directories not having a maintainer.
> >>>> There is no harm, and it is a good habit, to always Cc maintainers.
> >>>>
> >>>> Remove this case as it can mislead to not Cc maintainers when needed.
> >>>>
> >>>> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> >>>
> >>> I agree Cc: maintainers should be the default / recommended way of
> >>> sending patches.
> >>>
> >>> Just to convince myself, adding some meson skeleton for a "plop"
> >>> library, adding an entry in the release notes and hooking in
> >>> lib/meson.build:
> >>> $ git show --stat
> >>>  doc/guides/rel_notes/release_23_11.rst | 4 ++++
> >>>  lib/meson.build                        | 1 +
> >>>  lib/plop/meson.build                   | 2 ++
> >>>
> >>> $ ./devtools/get-maintainer.sh 0001-new-awesome-library.patch
> >>>
> >>> In this case, it translates to an empty To: list if you follow the
> >>> example command line:
> >>>    git send-email --to-cmd ./devtools/get-maintainer.sh --cc
> >>> dev@dpdk.org 000*.patch
> >>>
> >>> We could add a default list of recipients if no maintainer is found by
> >>> the script.
> >>> And the next question is who should be in that list..
> >>
> >> Or we can send to dev@dpdk.org, Cc maintainers.
> >> This is what I do:
> >> git send-email --to dev@dpdk.org --cc-cmd devtools/get-maintainer.sh
> >>
> > +1 for this, mainly on the basis of it being what I do too! :-)
> >
> 
> I am for "--to-cmd=./devtools/get-maintainer.sh --cc dev@dpdk.org"
> 
> To highlight response is expected from the maintainers, and community is
> informed.
> 
> Also people may have filters to give higher priority to emails they are
> in 'to' list, high priority is what we want from maintainers :)

They should give high priority when they are Cc as well.

The problem is that we may have patches with empty "To",
especially for cover letters and new libs.

Re: [PATCH] doc: remove confusing command to send patch

[Ferruh Yigit]

On 10/11/2023 11:20 AM, Thomas Monjalon wrote:
> 11/10/2023 10:41, Ferruh Yigit:
>> On 10/11/2023 9:30 AM, Bruce Richardson wrote:
>>> On Wed, Oct 11, 2023 at 10:03:07AM +0200, Thomas Monjalon wrote:
>>>> 11/10/2023 09:30, David Marchand:
>>>>> On Tue, Oct 10, 2023 at 6:26 PM Thomas Monjalon <thomas@monjalon.net> wrote:
>>>>>>
>>>>>> In the contributor guide, it was said that no need to Cc maintainers
>>>>>> for new additions, probably for new directories not having a maintainer.
>>>>>> There is no harm, and it is a good habit, to always Cc maintainers.
>>>>>>
>>>>>> Remove this case as it can mislead to not Cc maintainers when needed.
>>>>>>
>>>>>> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
>>>>>
>>>>> I agree Cc: maintainers should be the default / recommended way of
>>>>> sending patches.
>>>>>
>>>>> Just to convince myself, adding some meson skeleton for a "plop"
>>>>> library, adding an entry in the release notes and hooking in
>>>>> lib/meson.build:
>>>>> $ git show --stat
>>>>>  doc/guides/rel_notes/release_23_11.rst | 4 ++++
>>>>>  lib/meson.build                        | 1 +
>>>>>  lib/plop/meson.build                   | 2 ++
>>>>>
>>>>> $ ./devtools/get-maintainer.sh 0001-new-awesome-library.patch
>>>>>
>>>>> In this case, it translates to an empty To: list if you follow the
>>>>> example command line:
>>>>>    git send-email --to-cmd ./devtools/get-maintainer.sh --cc
>>>>> dev@dpdk.org 000*.patch
>>>>>
>>>>> We could add a default list of recipients if no maintainer is found by
>>>>> the script.
>>>>> And the next question is who should be in that list..
>>>>
>>>> Or we can send to dev@dpdk.org, Cc maintainers.
>>>> This is what I do:
>>>> git send-email --to dev@dpdk.org --cc-cmd devtools/get-maintainer.sh
>>>>
>>> +1 for this, mainly on the basis of it being what I do too! :-)
>>>
>>
>> I am for "--to-cmd=./devtools/get-maintainer.sh --cc dev@dpdk.org"
>>
>> To highlight response is expected from the maintainers, and community is
>> informed.
>>
>> Also people may have filters to give higher priority to emails they are
>> in 'to' list, high priority is what we want from maintainers :)
> 
> They should give high priority when they are Cc as well.
> 
> The problem is that we may have patches with empty "To",
> especially for cover letters and new libs.
> 

There are indeed, for those cases I am putting 'dev' to "To:".

Re: [PATCH] doc: remove confusing command to send patch

[Thomas Monjalon]

11/10/2023 12:22, Ferruh Yigit:
> On 10/11/2023 11:20 AM, Thomas Monjalon wrote:
> > 11/10/2023 10:41, Ferruh Yigit:
> >> On 10/11/2023 9:30 AM, Bruce Richardson wrote:
> >>> On Wed, Oct 11, 2023 at 10:03:07AM +0200, Thomas Monjalon wrote:
> >>>> 11/10/2023 09:30, David Marchand:
> >>>>> On Tue, Oct 10, 2023 at 6:26 PM Thomas Monjalon <thomas@monjalon.net> wrote:
> >>>>>>
> >>>>>> In the contributor guide, it was said that no need to Cc maintainers
> >>>>>> for new additions, probably for new directories not having a maintainer.
> >>>>>> There is no harm, and it is a good habit, to always Cc maintainers.
> >>>>>>
> >>>>>> Remove this case as it can mislead to not Cc maintainers when needed.
> >>>>>>
> >>>>>> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> >>>>>
> >>>>> I agree Cc: maintainers should be the default / recommended way of
> >>>>> sending patches.
> >>>>>
> >>>>> Just to convince myself, adding some meson skeleton for a "plop"
> >>>>> library, adding an entry in the release notes and hooking in
> >>>>> lib/meson.build:
> >>>>> $ git show --stat
> >>>>>  doc/guides/rel_notes/release_23_11.rst | 4 ++++
> >>>>>  lib/meson.build                        | 1 +
> >>>>>  lib/plop/meson.build                   | 2 ++
> >>>>>
> >>>>> $ ./devtools/get-maintainer.sh 0001-new-awesome-library.patch
> >>>>>
> >>>>> In this case, it translates to an empty To: list if you follow the
> >>>>> example command line:
> >>>>>    git send-email --to-cmd ./devtools/get-maintainer.sh --cc
> >>>>> dev@dpdk.org 000*.patch
> >>>>>
> >>>>> We could add a default list of recipients if no maintainer is found by
> >>>>> the script.
> >>>>> And the next question is who should be in that list..
> >>>>
> >>>> Or we can send to dev@dpdk.org, Cc maintainers.
> >>>> This is what I do:
> >>>> git send-email --to dev@dpdk.org --cc-cmd devtools/get-maintainer.sh
> >>>>
> >>> +1 for this, mainly on the basis of it being what I do too! :-)
> >>>
> >>
> >> I am for "--to-cmd=./devtools/get-maintainer.sh --cc dev@dpdk.org"
> >>
> >> To highlight response is expected from the maintainers, and community is
> >> informed.
> >>
> >> Also people may have filters to give higher priority to emails they are
> >> in 'to' list, high priority is what we want from maintainers :)
> > 
> > They should give high priority when they are Cc as well.
> > 
> > The problem is that we may have patches with empty "To",
> > especially for cover letters and new libs.
> 
> There are indeed, for those cases I am putting 'dev' to "To:".

So it would be simpler to recommend a single method with maintainers as Cc.

Re: [PATCH] doc: remove confusing command to send patch

[Stephen Hemminger]

On Wed, 11 Oct 2023 09:30:23 +0100
Bruce Richardson <bruce.richardson@intel.com> wrote:

> > Or we can send to dev@dpdk.org, Cc maintainers.
> > This is what I do:
> > git send-email --to dev@dpdk.org --cc-cmd devtools/get-maintainer.sh
> >   
> +1 for this, mainly on the basis of it being what I do too! :-)

Ditto.
Maybe would be good to have alias or wrapper script?

Re: [PATCH] doc: remove confusing command to send patch

[Thomas Monjalon]

11/10/2023 17:52, Stephen Hemminger:
> On Wed, 11 Oct 2023 09:30:23 +0100
> Bruce Richardson <bruce.richardson@intel.com> wrote:
> 
> > > Or we can send to dev@dpdk.org, Cc maintainers.
> > > This is what I do:
> > > git send-email --to dev@dpdk.org --cc-cmd devtools/get-maintainer.sh
> > >   
> > +1 for this, mainly on the basis of it being what I do too! :-)
> 
> Ditto.
> Maybe would be good to have alias or wrapper script?

I am convinced we should have an interactive script to send patches.
I could make something using this tool:
	https://github.com/tmonjalo/choose

Re: [PATCH] doc: remove confusing command to send patch

[Stephen Hemminger]

On Tue, 10 Oct 2023 18:26:35 +0200
Thomas Monjalon <thomas@monjalon.net> wrote:

> In the contributor guide, it was said that no need to Cc maintainers
> for new additions, probably for new directories not having a maintainer.
> There is no harm, and it is a good habit, to always Cc maintainers.
> 
> Remove this case as it can mislead to not Cc maintainers when needed.
> 
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
> ---
>  doc/guides/contributing/patches.rst | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/doc/guides/contributing/patches.rst b/doc/guides/contributing/patches.rst
> index e286d9e6d5..d114ceba2b 100644
> --- a/doc/guides/contributing/patches.rst
> +++ b/doc/guides/contributing/patches.rst
> @@ -561,10 +561,6 @@ Script ``get-maintainer.sh`` can be used to select maintainers automatically::
>  
>    git send-email --to-cmd ./devtools/get-maintainer.sh --cc dev@dpdk.org 000*.patch
>  
> -New additions can be sent without a maintainer::
> -
> -   git send-email --to dev@dpdk.org 000*.patch
> -
>  You can test the emails by sending it to yourself or with the ``--dry-run`` option.
>  
>  If the patch is in relation to a previous email thread you can add it to the same thread using the Message ID::

Acked-by: Stephen Hemminger <stephen@networkplumber.org>

Re: [PATCH] doc: remove confusing command to send patch

[Thomas Monjalon]

10/10/2023 18:26, Thomas Monjalon:
> In the contributor guide, it was said that no need to Cc maintainers
> for new additions, probably for new directories not having a maintainer.
> There is no harm, and it is a good habit, to always Cc maintainers.
> 
> Remove this case as it can mislead to not Cc maintainers when needed.
> 
> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

There was a discussion about this patch but no better solution,
so applied to avoid confusion.