[PATCH v8 21/21] dts: test suites docstring update

["Juraj Linkeš" <juraj.linkes@pantheon.tech>]

Format according to the Google format and PEP257, with slight
deviations.

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
---
 dts/tests/TestSuite_hello_world.py | 16 +++++---
 dts/tests/TestSuite_os_udp.py      | 20 ++++++----
 dts/tests/TestSuite_smoke_tests.py | 61 ++++++++++++++++++++++++------
 3 files changed, 72 insertions(+), 25 deletions(-)

diff --git a/dts/tests/TestSuite_hello_world.py b/dts/tests/TestSuite_hello_world.py
index 768ba1cfa8..fd7ff1534d 100644
--- a/dts/tests/TestSuite_hello_world.py
+++ b/dts/tests/TestSuite_hello_world.py
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2010-2014 Intel Corporation
 
-"""
+"""The DPDK hello world app test suite.
+
 Run the helloworld example app and verify it prints a message for each used core.
 No other EAL parameters apart from cores are used.
 """
@@ -15,22 +16,25 @@
 
 
 class TestHelloWorld(TestSuite):
+    """DPDK hello world app test suite."""
+
     def set_up_suite(self) -> None:
-        """
+        """Set up the test suite.
+
         Setup:
             Build the app we're about to test - helloworld.
         """
         self.app_helloworld_path = self.sut_node.build_dpdk_app("helloworld")
 
     def test_hello_world_single_core(self) -> None:
-        """
+        """Single core test case.
+
         Steps:
             Run the helloworld app on the first usable logical core.
         Verify:
             The app prints a message from the used core:
             "hello from core <core_id>"
         """
-
         # get the first usable core
         lcore_amount = LogicalCoreCount(1, 1, 1)
         lcores = LogicalCoreCountFilter(self.sut_node.lcores, lcore_amount).filter()
@@ -42,14 +46,14 @@ def test_hello_world_single_core(self) -> None:
         )
 
     def test_hello_world_all_cores(self) -> None:
-        """
+        """All cores test case.
+
         Steps:
             Run the helloworld app on all usable logical cores.
         Verify:
             The app prints a message from all used cores:
             "hello from core <core_id>"
         """
-
         # get the maximum logical core number
         eal_para = self.sut_node.create_eal_parameters(
             lcore_filter_specifier=LogicalCoreList(self.sut_node.lcores)
diff --git a/dts/tests/TestSuite_os_udp.py b/dts/tests/TestSuite_os_udp.py
index bf6b93deb5..2cf29d37bb 100644
--- a/dts/tests/TestSuite_os_udp.py
+++ b/dts/tests/TestSuite_os_udp.py
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2023 PANTHEON.tech s.r.o.
 
-"""
+"""Basic IPv4 OS routing test suite.
+
 Configure SUT node to route traffic from if1 to if2.
 Send a packet to the SUT node, verify it comes back on the second port on the TG node.
 """
@@ -13,24 +14,26 @@
 
 
 class TestOSUdp(TestSuite):
+    """IPv4 UDP OS routing test suite."""
+
     def set_up_suite(self) -> None:
-        """
+        """Set up the test suite.
+
         Setup:
-            Configure SUT ports and SUT to route traffic from if1 to if2.
+            Bind the SUT ports to the OS driver, configure the ports and configure the SUT
+            to route traffic from if1 to if2.
         """
-
-        # This test uses kernel drivers
         self.sut_node.bind_ports_to_driver(for_dpdk=False)
         self.configure_testbed_ipv4()
 
     def test_os_udp(self) -> None:
-        """
+        """Basic UDP IPv4 traffic test case.
+
         Steps:
             Send a UDP packet.
         Verify:
             The packet with proper addresses arrives at the other TG port.
         """
-
         packet = Ether() / IP() / UDP()
 
         received_packets = self.send_packet_and_capture(packet)
@@ -40,7 +43,8 @@ def test_os_udp(self) -> None:
         self.verify_packets(expected_packet, received_packets)
 
     def tear_down_suite(self) -> None:
-        """
+        """Tear down the test suite.
+
         Teardown:
             Remove the SUT port configuration configured in setup.
         """
diff --git a/dts/tests/TestSuite_smoke_tests.py b/dts/tests/TestSuite_smoke_tests.py
index 8958f58dac..5e2bac14bd 100644
--- a/dts/tests/TestSuite_smoke_tests.py
+++ b/dts/tests/TestSuite_smoke_tests.py
@@ -1,6 +1,17 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2023 University of New Hampshire
 
+"""Smoke test suite.
+
+Smoke tests are a class of tests which are used for validating a minimal set of important features.
+These are the most important features without which (or when they're faulty) the software wouldn't
+work properly. Thus, if any failure occurs while testing these features,
+there isn't that much of a reason to continue testing, as the software is fundamentally broken.
+
+These tests don't have to include only DPDK tests, as the reason for failures could be
+in the infrastructure (a faulty link between NICs or a misconfiguration).
+"""
+
 import re
 
 from framework.config import PortConfig
@@ -11,23 +22,39 @@
 
 
 class SmokeTests(TestSuite):
+    """DPDK and infrastructure smoke test suite.
+
+    The test cases validate the most basic DPDK functionality needed for all other test suites.
+    The infrastructure also needs to be tested, as that is also used by all other test suites.
+
+    Attributes:
+        is_blocking: This test suite will block the execution of all other test suites
+            in the build target after it.
+        nics_in_node: The NICs present on the SUT node.
+    """
+
     is_blocking = True
     # dicts in this list are expected to have two keys:
     # "pci_address" and "current_driver"
     nics_in_node: list[PortConfig] = []
 
     def set_up_suite(self) -> None:
-        """
+        """Set up the test suite.
+
         Setup:
-            Set the build directory path and generate a list of NICs in the SUT node.
+            Set the build directory path and a list of NICs in the SUT node.
         """
         self.dpdk_build_dir_path = self.sut_node.remote_dpdk_build_dir
         self.nics_in_node = self.sut_node.config.ports
 
     def test_unit_tests(self) -> None:
-        """
+        """DPDK meson ``fast-tests`` unit tests.
+
+        Test that all unit test from the ``fast-tests`` suite pass.
+        The suite is a subset with only the most basic tests.
+
         Test:
-            Run the fast-test unit-test suite through meson.
+            Run the ``fast-tests`` unit test suite through meson.
         """
         self.sut_node.main_session.send_command(
             f"meson test -C {self.dpdk_build_dir_path} --suite fast-tests -t 60",
@@ -37,9 +64,14 @@ def test_unit_tests(self) -> None:
         )
 
     def test_driver_tests(self) -> None:
-        """
+        """DPDK meson ``driver-tests`` unit tests.
+
+        Test that all unit test from the ``driver-tests`` suite pass.
+        The suite is a subset with driver tests. This suite may be run with virtual devices
+        configured in the test run configuration.
+
         Test:
-            Run the driver-test unit-test suite through meson.
+            Run the ``driver-tests`` unit test suite through meson.
         """
         vdev_args = ""
         for dev in self.sut_node.virtual_devices:
@@ -60,9 +92,12 @@ def test_driver_tests(self) -> None:
         )
 
     def test_devices_listed_in_testpmd(self) -> None:
-        """
+        """Testpmd device discovery.
+
+        Test that the devices configured in the test run configuration are found in testpmd.
+
         Test:
-            Uses testpmd driver to verify that devices have been found by testpmd.
+            List all devices found in testpmd and verify the configured devices are among them.
         """
         testpmd_driver = self.sut_node.create_interactive_shell(TestPmdShell, privileged=True)
         dev_list = [str(x) for x in testpmd_driver.get_devices()]
@@ -74,10 +109,14 @@ def test_devices_listed_in_testpmd(self) -> None:
             )
 
     def test_device_bound_to_driver(self) -> None:
-        """
+        """Device driver in OS.
+
+        Test that the devices configured in the test run configuration are bound to
+        the proper driver.
+
         Test:
-            Ensure that all drivers listed in the config are bound to the correct
-            driver.
+            List all devices with the ``dpdk-devbind.py`` script and verify that
+            the configured devices are bound to the proper driver.
         """
         path_to_devbind = self.sut_node.path_to_devbind_script
 
-- 
2.34.1