From: Rakesh Kudurumalla <rkudurumalla@marvell.com>
To: Nithin Dabilpuram <ndabilpuram@marvell.com>,
Kiran Kumar K <kirankumark@marvell.com>,
Sunil Kumar Kori <skori@marvell.com>,
Satha Rao <skoteshwar@marvell.com>
Cc: <dev@dpdk.org>, <jerinj@marvell.com>,
Rakesh Kudurumalla <rkudurumalla@marvell.com>
Subject: [PATCH 2/2] net/cnxk: dump Rx descriptor info to file
Date: Tue, 5 Dec 2023 15:15:39 +0530 [thread overview]
Message-ID: <20231205094539.1377142-2-rkudurumalla@marvell.com> (raw)
In-Reply-To: <20231205094539.1377142-1-rkudurumalla@marvell.com>
Add support for eth_rx_descriptor_dump for cn9k and cn10k.
This patch dumps contents of receviced packet descriptor from CQ
for debug to file
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
---
drivers/net/cnxk/cn10k_ethdev.c | 67 +++++++++++++++++++++++++++++++++
drivers/net/cnxk/cn9k_ethdev.c | 53 ++++++++++++++++++++++++++
2 files changed, 120 insertions(+)
diff --git a/drivers/net/cnxk/cn10k_ethdev.c b/drivers/net/cnxk/cn10k_ethdev.c
index 4a4e97287c..7eee9b1da8 100644
--- a/drivers/net/cnxk/cn10k_ethdev.c
+++ b/drivers/net/cnxk/cn10k_ethdev.c
@@ -656,6 +656,72 @@ cn10k_nix_reassembly_conf_set(struct rte_eth_dev *eth_dev,
return rc;
}
+static int
+cn10k_nix_rx_avail_get(struct cn10k_eth_rxq *rxq)
+{
+ uint32_t qmask = rxq->qmask;
+ uint64_t reg, head, tail;
+ int available;
+
+ /* Use LDADDA version to avoid reorder */
+ reg = roc_atomic64_add_sync(rxq->wdata, rxq->cq_status);
+ /* CQ_OP_STATUS operation error */
+ if (reg & BIT_ULL(NIX_CQ_OP_STAT_OP_ERR) ||
+ reg & BIT_ULL(NIX_CQ_OP_STAT_CQ_ERR))
+ return 0;
+ tail = reg & 0xFFFFF;
+ head = (reg >> 20) & 0xFFFFF;
+ if (tail < head)
+ available = tail - head + qmask + 1;
+ else
+ available = tail - head;
+
+ return available;
+}
+
+static int
+cn10k_rx_descriptor_dump(const struct rte_eth_dev *eth_dev, uint16_t qid,
+ uint16_t offset, uint16_t num, FILE *file)
+{
+ struct cn10k_eth_rxq *rxq = eth_dev->data->rx_queues[qid];
+ const uint64_t data_off = rxq->data_off;
+ const uint32_t qmask = rxq->qmask;
+ const uintptr_t desc = rxq->desc;
+ struct cpt_parse_hdr_s *cpth;
+ uint32_t head = rxq->head;
+ struct nix_cqe_hdr_s *cq;
+ uint16_t count = 0;
+ int availble_pkts;
+ uint64_t cq_w1;
+
+ availble_pkts = cn10k_nix_rx_avail_get(rxq);
+
+ if ((offset + num - 1) >= availble_pkts) {
+ plt_err("Invalid BD num=%u\n", num);
+ return -EINVAL;
+ }
+
+ while (count < num) {
+ cq = (struct nix_cqe_hdr_s *)(desc + CQE_SZ(head) +
+ count + offset);
+ cq_w1 = *((const uint64_t *)cq + 1);
+ if (cq_w1 & BIT(11)) {
+ rte_iova_t buff = *((rte_iova_t *)((uint64_t *)cq + 9));
+ struct rte_mbuf *mbuf =
+ (struct rte_mbuf *)(buff - data_off);
+ cpth = (struct cpt_parse_hdr_s *)
+ ((uintptr_t)mbuf + (uint16_t)data_off);
+ roc_cpt_parse_hdr_dump(file, cpth);
+ } else {
+ roc_nix_cqe_dump(file, cq);
+ }
+
+ count++;
+ head &= qmask;
+ }
+ return 0;
+}
+
static int
cn10k_nix_tm_mark_vlan_dei(struct rte_eth_dev *eth_dev, int mark_green,
int mark_yellow, int mark_red,
@@ -794,6 +860,7 @@ nix_eth_dev_ops_override(void)
cn10k_nix_reassembly_capability_get;
cnxk_eth_dev_ops.ip_reassembly_conf_get = cn10k_nix_reassembly_conf_get;
cnxk_eth_dev_ops.ip_reassembly_conf_set = cn10k_nix_reassembly_conf_set;
+ cnxk_eth_dev_ops.eth_rx_descriptor_dump = cn10k_rx_descriptor_dump;
}
/* Update platform specific tm ops */
diff --git a/drivers/net/cnxk/cn9k_ethdev.c b/drivers/net/cnxk/cn9k_ethdev.c
index bae4dda5e2..e88631a02e 100644
--- a/drivers/net/cnxk/cn9k_ethdev.c
+++ b/drivers/net/cnxk/cn9k_ethdev.c
@@ -664,6 +664,58 @@ cn9k_nix_tm_mark_ip_dscp(struct rte_eth_dev *eth_dev, int mark_green,
return rc;
}
+static int
+cn9k_nix_rx_avail_get(struct cn9k_eth_rxq *rxq)
+{
+ uint32_t qmask = rxq->qmask;
+ uint64_t reg, head, tail;
+ int available;
+
+ /* Use LDADDA version to avoid reorder */
+ reg = roc_atomic64_add_sync(rxq->wdata, rxq->cq_status);
+ /* CQ_OP_STATUS operation error */
+ if (reg & BIT_ULL(NIX_CQ_OP_STAT_OP_ERR) ||
+ reg & BIT_ULL(NIX_CQ_OP_STAT_CQ_ERR))
+ return 0;
+ tail = reg & 0xFFFFF;
+ head = (reg >> 20) & 0xFFFFF;
+ if (tail < head)
+ available = tail - head + qmask + 1;
+ else
+ available = tail - head;
+
+ return available;
+}
+
+static int
+cn9k_rx_descriptor_dump(const struct rte_eth_dev *eth_dev, uint16_t qid,
+ uint16_t offset, uint16_t num, FILE *file)
+{
+ struct cn9k_eth_rxq *rxq = eth_dev->data->rx_queues[qid];
+ const uint32_t qmask = rxq->qmask;
+ const uintptr_t desc = rxq->desc;
+ uint32_t head = rxq->head;
+ struct nix_cqe_hdr_s *cq;
+ uint16_t count = 0;
+ int availble_pkts;
+
+ availble_pkts = cn9k_nix_rx_avail_get(rxq);
+
+ if ((offset + num - 1) >= availble_pkts) {
+ plt_err("Invalid BD num=%u\n", num);
+ return -EINVAL;
+ }
+
+ while (count < num) {
+ cq = (struct nix_cqe_hdr_s *)(desc + CQE_SZ(head) +
+ count + offset);
+ roc_nix_cqe_dump(file, cq);
+ count++;
+ head &= qmask;
+ }
+ return 0;
+}
+
/* Update platform specific eth dev ops */
static void
nix_eth_dev_ops_override(void)
@@ -687,6 +739,7 @@ nix_eth_dev_ops_override(void)
cnxk_eth_dev_ops.mtr_ops_get = NULL;
cnxk_eth_dev_ops.timesync_read_tx_timestamp =
cn9k_nix_timesync_read_tx_timestamp;
+ cnxk_eth_dev_ops.eth_rx_descriptor_dump = cn9k_rx_descriptor_dump;
}
/* Update platform specific eth dev ops */
--
2.25.1
next prev parent reply other threads:[~2023-12-05 9:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 9:45 [PATCH 1/2] common/cnxk: support to dump debug " Rakesh Kudurumalla
2023-12-05 9:45 ` Rakesh Kudurumalla [this message]
2023-12-07 6:36 ` [PATCH 2/2] net/cnxk: dump Rx descriptor " Jerin Jacob
2023-12-07 13:46 ` [PATCH v2 1/2] common/cnxk: support to dump debug " Rakesh Kudurumalla
2023-12-07 13:46 ` [PATCH v2 2/2] net/cnxk: dump Rx descriptor " Rakesh Kudurumalla
2023-12-11 9:40 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231205094539.1377142-2-rkudurumalla@marvell.com \
--to=rkudurumalla@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=kirankumark@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=skori@marvell.com \
--cc=skoteshwar@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).