DPDK patches and discussions
 help / color / mirror / Atom feed
From: Sivaramakrishnan Venkat <venkatx.sivaramakrishnan@intel.com>
To: Kai Ji <kai.ji@intel.com>,
	Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cc: dev@dpdk.org, bruce.richardson@intel.com, ciara.power@intel.com,
	Sivaramakrishnan Venkat <venkatx.sivaramakrishnan@intel.com>
Subject: [PATCH v3 2/2] doc: remove outdated version details
Date: Fri,  2 Feb 2024 14:04:17 +0000	[thread overview]
Message-ID: <20240202140417.2399200-2-venkatx.sivaramakrishnan@intel.com> (raw)
In-Reply-To: <20240202140417.2399200-1-venkatx.sivaramakrishnan@intel.com>

SW PMDs documentation is updated to remove details of unsupported IPsec
Multi-buffer versions.DPDK older than 20.11 is end of life. So, older
DPDK versions are removed from the Crypto library version table.

Signed-off-by: Sivaramakrishnan Venkat <venkatx.sivaramakrishnan@intel.com>
---
 v3:
    - added second patch for outdated documentation updates.
---
 doc/guides/cryptodevs/aesni_gcm.rst         | 19 +++---------------
 doc/guides/cryptodevs/aesni_mb.rst          | 22 +++------------------
 doc/guides/cryptodevs/chacha20_poly1305.rst | 12 ++---------
 doc/guides/cryptodevs/kasumi.rst            | 14 +++----------
 doc/guides/cryptodevs/snow3g.rst            | 15 +++-----------
 doc/guides/cryptodevs/zuc.rst               | 15 +++-----------
 6 files changed, 17 insertions(+), 80 deletions(-)

diff --git a/doc/guides/cryptodevs/aesni_gcm.rst b/doc/guides/cryptodevs/aesni_gcm.rst
index dc665e536c..e38a03b78f 100644
--- a/doc/guides/cryptodevs/aesni_gcm.rst
+++ b/doc/guides/cryptodevs/aesni_gcm.rst
@@ -62,12 +62,6 @@ Once it is downloaded, extract it and follow these steps:
     make
     make install
 
-.. note::
-
-   Compilation of the Multi-Buffer library is broken when GCC < 5.0, if library <= v0.53.
-   If a lower GCC version than 5.0, the workaround proposed by the following link
-   should be used: `<https://github.com/intel/intel-ipsec-mb/issues/40>`_.
-
 
 As a reference, the following table shows a mapping between the past DPDK versions
 and the external crypto libraries supported by them:
@@ -79,18 +73,11 @@ and the external crypto libraries supported by them:
    =============  ================================
    DPDK version   Crypto library version
    =============  ================================
-   16.04 - 16.11  Multi-buffer library 0.43 - 0.44
-   17.02 - 17.05  ISA-L Crypto v2.18
-   17.08 - 18.02  Multi-buffer library 0.46 - 0.48
-   18.05 - 19.02  Multi-buffer library 0.49 - 0.52
-   19.05 - 20.08  Multi-buffer library 0.52 - 0.55
-   20.11 - 21.08  Multi-buffer library 0.53 - 1.3*
-   21.11 - 23.11  Multi-buffer library 1.0  - 1.5*
-   24.03+         Multi-buffer library 1.4  - 1.5*
+   20.11 - 21.08  Multi-buffer library 0.53 - 1.3
+   21.11 - 23.11  Multi-buffer library 1.0  - 1.5
+   24.03+         Multi-buffer library 1.4  - 1.5
    =============  ================================
 
-\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
-
 Initialization
 --------------
 
diff --git a/doc/guides/cryptodevs/aesni_mb.rst b/doc/guides/cryptodevs/aesni_mb.rst
index 5d670ee237..bd7c8de07f 100644
--- a/doc/guides/cryptodevs/aesni_mb.rst
+++ b/doc/guides/cryptodevs/aesni_mb.rst
@@ -121,12 +121,6 @@ Once it is downloaded, extract it and follow these steps:
     make
     make install
 
-.. note::
-
-   Compilation of the Multi-Buffer library is broken when GCC < 5.0, if library <= v0.53.
-   If a lower GCC version than 5.0, the workaround proposed by the following link
-   should be used: `<https://github.com/intel/intel-ipsec-mb/issues/40>`_.
-
 As a reference, the following table shows a mapping between the past DPDK versions
 and the Multi-Buffer library version supported by them:
 
@@ -137,21 +131,11 @@ and the Multi-Buffer library version supported by them:
    ==============  ============================
    DPDK version    Multi-buffer library version
    ==============  ============================
-   2.2 - 16.11     0.43 - 0.44
-   17.02           0.44
-   17.05 - 17.08   0.45 - 0.48
-   17.11           0.47 - 0.48
-   18.02           0.48
-   18.05 - 19.02   0.49 - 0.52
-   19.05 - 19.08   0.52
-   19.11 - 20.08   0.52 - 0.55
-   20.11 - 21.08   0.53 - 1.3*
-   21.11 - 23.11   1.0  - 1.5*
-   24.03+          1.4  - 1.5*
+   20.11 - 21.08   0.53 - 1.3
+   21.11 - 23.11   1.0  - 1.5
+   24.03+          1.4  - 1.5
    ==============  ============================
 
-\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
-
 Initialization
 --------------
 
diff --git a/doc/guides/cryptodevs/chacha20_poly1305.rst b/doc/guides/cryptodevs/chacha20_poly1305.rst
index c32866b301..8e0ee4f835 100644
--- a/doc/guides/cryptodevs/chacha20_poly1305.rst
+++ b/doc/guides/cryptodevs/chacha20_poly1305.rst
@@ -56,12 +56,6 @@ Once it is downloaded, extract it and follow these steps:
     make
     make install
 
-.. note::
-
-   Compilation of the Multi-Buffer library is broken when GCC < 5.0, if library <= v0.53.
-   If a lower GCC version than 5.0, the workaround proposed by the following link
-   should be used: `<https://github.com/intel/intel-ipsec-mb/issues/40>`_.
-
 As a reference, the following table shows a mapping between the past DPDK versions
 and the external crypto libraries supported by them:
 
@@ -72,12 +66,10 @@ and the external crypto libraries supported by them:
    =============  ================================
    DPDK version   Crypto library version
    =============  ================================
-   21.11 - 23.11  Multi-buffer library 1.0-1.5*
-   24.03+         Multi-buffer library 1.4-1.5*
+   21.11 - 23.11  Multi-buffer library 1.0-1.5
+   24.03+         Multi-buffer library 1.4-1.5
    =============  ================================
 
-\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
-
 Initialization
 --------------
 
diff --git a/doc/guides/cryptodevs/kasumi.rst b/doc/guides/cryptodevs/kasumi.rst
index a8f4e6b204..28ac452524 100644
--- a/doc/guides/cryptodevs/kasumi.rst
+++ b/doc/guides/cryptodevs/kasumi.rst
@@ -69,12 +69,6 @@ Once it is downloaded, extract it and follow these steps:
     make
     make install
 
-.. note::
-
-   Compilation of the Multi-Buffer library is broken when GCC < 5.0, if library <= v0.53.
-   If a lower GCC version than 5.0, the workaround proposed by the following link
-   should be used: `<https://github.com/intel/intel-ipsec-mb/issues/40>`_.
-
 As a reference, the following table shows a mapping between the past DPDK versions
 and the external crypto libraries supported by them:
 
@@ -86,13 +80,11 @@ and the external crypto libraries supported by them:
    DPDK version   Crypto library version
    =============  ================================
    16.11 - 19.11  LibSSO KASUMI
-   20.02 - 21.08  Multi-buffer library 0.53 - 1.3*
-   21.11 - 23.11  Multi-buffer library 1.0  - 1.5*
-   24.03+         Multi-buffer library 1.4  - 1.5*
+   20.11 - 21.08  Multi-buffer library 0.53 - 1.3
+   21.11 - 23.11  Multi-buffer library 1.0  - 1.5
+   24.03+         Multi-buffer library 1.4  - 1.5
    =============  ================================
 
-\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
-
 Initialization
 --------------
 
diff --git a/doc/guides/cryptodevs/snow3g.rst b/doc/guides/cryptodevs/snow3g.rst
index 46863462e5..0141f62976 100644
--- a/doc/guides/cryptodevs/snow3g.rst
+++ b/doc/guides/cryptodevs/snow3g.rst
@@ -78,12 +78,6 @@ Once it is downloaded, extract it and follow these steps:
     make
     make install
 
-.. note::
-
-   Compilation of the Multi-Buffer library is broken when GCC < 5.0, if library <= v0.53.
-   If a lower GCC version than 5.0, the workaround proposed by the following link
-   should be used: `<https://github.com/intel/intel-ipsec-mb/issues/40>`_.
-
 As a reference, the following table shows a mapping between the past DPDK versions
 and the external crypto libraries supported by them:
 
@@ -94,14 +88,11 @@ and the external crypto libraries supported by them:
    =============  ================================
    DPDK version   Crypto library version
    =============  ================================
-   16.04 - 19.11  LibSSO SNOW3G
-   20.02 - 21.08  Multi-buffer library 0.53 - 1.3*
-   21.11 - 23.11  Multi-buffer library 1.0  - 1.5*
-   24.03+         Multi-buffer library 1.4  - 1.5*
+   20.11 - 21.08  Multi-buffer library 0.53 - 1.3
+   21.11 - 23.11  Multi-buffer library 1.0  - 1.5
+   24.03+         Multi-buffer library 1.4  - 1.5
    =============  ================================
 
-\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
-
 Initialization
 --------------
 
diff --git a/doc/guides/cryptodevs/zuc.rst b/doc/guides/cryptodevs/zuc.rst
index 51867e1a16..97c14c8c77 100644
--- a/doc/guides/cryptodevs/zuc.rst
+++ b/doc/guides/cryptodevs/zuc.rst
@@ -77,12 +77,6 @@ Once it is downloaded, extract it and follow these steps:
     make
     make install
 
-.. note::
-
-   Compilation of the Multi-Buffer library is broken when GCC < 5.0, if library <= v0.53.
-   If a lower GCC version than 5.0, the workaround proposed by the following link
-   should be used: `<https://github.com/intel/intel-ipsec-mb/issues/40>`_.
-
 As a reference, the following table shows a mapping between the past DPDK versions
 and the external crypto libraries supported by them:
 
@@ -93,14 +87,11 @@ and the external crypto libraries supported by them:
    =============  ================================
    DPDK version   Crypto library version
    =============  ================================
-   16.11 - 19.11  LibSSO ZUC
-   20.02 - 21.08  Multi-buffer library 0.53 - 1.3*
-   21.11 - 23.11  Multi-buffer library 1.0  - 1.5*
-   24.03+         Multi-buffer library 1.4  - 1.5*
+   20.11 - 21.08  Multi-buffer library 0.53 - 1.3
+   21.11 - 23.11  Multi-buffer library 1.0  - 1.5
+   24.03+         Multi-buffer library 1.4  - 1.5
    =============  ================================
 
-\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
-
 Initialization
 --------------
 
-- 
2.25.1


  reply	other threads:[~2024-02-02 14:04 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-19 11:40 [PATCH v1] crypto/ipsec_mb: upgrade IPsec Multi-buffer to 1.4 Sivaramakrishnan Venkat
2024-01-23 11:42 ` Power, Ciara
2024-01-25 20:10 ` De Lara Guarch, Pablo
2024-01-30 14:24 ` [PATCH v2] crypto/ipsec_mb: bump minimum IPSec Multi-buffer version Sivaramakrishnan Venkat
2024-02-02 14:04 ` [PATCH v3 1/2] crypto/ipsec_mb: bump minimum IPsec " Sivaramakrishnan Venkat
2024-02-02 14:04   ` Sivaramakrishnan Venkat [this message]
2024-02-02 15:56     ` [PATCH v3 2/2] doc: remove outdated version details De Lara Guarch, Pablo
2024-02-02 15:56   ` [PATCH v3 1/2] crypto/ipsec_mb: bump minimum IPsec Multi-buffer version De Lara Guarch, Pablo
2024-02-22 17:39   ` [EXT] " Akhil Goyal
2024-02-23 12:29 ` [PATCH v4 " Sivaramakrishnan Venkat
2024-02-23 12:29   ` [PATCH v4 2/2] doc: remove outdated version details Sivaramakrishnan Venkat
2024-03-05 15:10     ` Wathsala Wathawana Vithanage
2024-03-05 15:13   ` [PATCH v4 1/2] crypto/ipsec_mb: bump minimum IPsec Multi-buffer version Wathsala Wathawana Vithanage

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240202140417.2399200-2-venkatx.sivaramakrishnan@intel.com \
    --to=venkatx.sivaramakrishnan@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=ciara.power@intel.com \
    --cc=dev@dpdk.org \
    --cc=kai.ji@intel.com \
    --cc=pablo.de.lara.guarch@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).