DPDK patches and discussions
 help / color / mirror / Atom feed
* [PATCH v2 00/33] net/ena: v2.9.0 driver release
@ 2024-03-04 12:29 shaibran
  2024-03-04 12:29 ` [PATCH v2 01/33] net/ena: rework the metrics multi-process functions shaibran
                   ` (32 more replies)
  0 siblings, 33 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Hi all, the ena v2.9.0 release introduces:
1. HAL upgrade:
   - renamed the 'base' folder to be 'hal'
   - separated the HAL patches instead of a bulk update.
2. Restructured ena stats and metrics.
3. Restructured the LLQ configuration:
   - configurable via devarg.
   - support device recommendation.
   - restructure the logic in driver.
4. Added support for the admin queue to work only in poll-mode
   - configurable via devarg.
   - allows to bind ports to uio_pci_generic kernel driver.
5. Reworked the device close to exhaust interrupt callbacks and alarms.
6. Fixed a bug in fast mbuf free.
Best regards.

---
v2:
* Fixed minor spelling issues from checkpatch

Shai Brandes (33):
  net/ena: rework the metrics multi-process functions
  net/ena: report new supported link speed capabilities
  net/ena: update imissed stat with Rx overruns
  net/ena: sub-optimal configuration notifications support
  net/ena: fix fast mbuf free
  net/ena: rename base folder to hal
  net/ena: restructure the llq policy setting process
  net/ena/hal: exponential backoff exp limit
  net/ena/hal: add a new csum offload bit
  net/ena/hal: added a bus parameter to ena memcpy macro
  net/ena/hal: optimize Rx ring submission queue
  net/ena/hal: rename fields in completion descriptors
  net/ena/hal: use correct read once on u8 field
  net/ena/hal: add completion descriptor corruption check
  net/ena/hal: malformed Tx descriptor error reason
  net/ena/hal: phc feature modifications
  net/ena/hal: restructure interrupt handling
  net/ena/hal: add unlikely to error checks
  net/ena/hal: missing admin interrupt reset reason
  net/ena/hal: check for existing keep alive notification
  net/ena/hal: modify memory barrier comment
  net/ena/hal: rework Rx ring submission queue
  net/ena/hal: remove operating system type enum
  net/ena/hal: handle command abort
  net/ena/hal: add support for device reset request
  net/ena: cosmetic changes
  net/ena/hal: modify customer metrics memory management
  net/ena/hal: cosmetic changes
  net/ena: update device-preferred size of rings
  net/ena: exhaust interrupt callbacks in device close
  net/ena: support max large llq depth from the device
  net/ena: control path pure polling mode
  net/ena: upgrade driver version to 2.9.0

 doc/guides/nics/ena.rst                       |  61 ++--
 doc/guides/rel_notes/release_24_03.rst        |  11 +
 drivers/net/ena/ena_ethdev.c                  | 316 ++++++++++++------
 drivers/net/ena/ena_ethdev.h                  |  17 +-
 drivers/net/ena/{base => hal}/ena_com.c       | 240 +++++++++----
 drivers/net/ena/{base => hal}/ena_com.h       |  53 ++-
 .../{base => hal}/ena_defs/ena_admin_defs.h   |  92 +++--
 .../{base => hal}/ena_defs/ena_common_defs.h  |   0
 .../{base => hal}/ena_defs/ena_eth_io_defs.h  |  49 ++-
 .../ena/{base => hal}/ena_defs/ena_gen_info.h |   0
 .../ena/{base => hal}/ena_defs/ena_includes.h |   0
 .../{base => hal}/ena_defs/ena_regs_defs.h    |   3 +
 drivers/net/ena/{base => hal}/ena_eth_com.c   |  56 ++--
 drivers/net/ena/{base => hal}/ena_eth_com.h   |  14 +-
 drivers/net/ena/{base => hal}/ena_plat.h      |   0
 drivers/net/ena/{base => hal}/ena_plat_dpdk.h |   9 +-
 drivers/net/ena/meson.build                   |   6 +-
 17 files changed, 669 insertions(+), 258 deletions(-)
 rename drivers/net/ena/{base => hal}/ena_com.c (94%)
 rename drivers/net/ena/{base => hal}/ena_com.h (96%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_admin_defs.h (96%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_common_defs.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_eth_io_defs.h (95%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_gen_info.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_includes.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_regs_defs.h (97%)
 rename drivers/net/ena/{base => hal}/ena_eth_com.c (93%)
 rename drivers/net/ena/{base => hal}/ena_eth_com.h (94%)
 rename drivers/net/ena/{base => hal}/ena_plat.h (100%)
 rename drivers/net/ena/{base => hal}/ena_plat_dpdk.h (97%)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 01/33] net/ena: rework the metrics multi-process functions
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 02/33] net/ena: report new supported link speed capabilities shaibran
                   ` (31 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

1. Changed the rte_memcpy call to use the precomputed buf_size.
2. Removed redundant address operators (ampersand symbol)
   when providing memcpy source address parameter.
3. Code style related change.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/ena_ethdev.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index beb17c4125..6d500bfa78 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -531,8 +531,8 @@ __extension__ ({
 __extension__ ({
 	ENA_TOUCH(rsp);
 	ENA_TOUCH(ena_dev);
-	if (stats != (struct ena_admin_eni_stats *)&adapter->metrics_stats)
-		rte_memcpy(stats, &adapter->metrics_stats, sizeof(*stats));
+	if (stats != (struct ena_admin_eni_stats *)adapter->metrics_stats)
+		rte_memcpy(stats, adapter->metrics_stats, sizeof(*stats));
 }),
 	struct ena_com_dev *ena_dev, struct ena_admin_eni_stats *stats);
 
@@ -590,9 +590,8 @@ __extension__ ({
 __extension__ ({
 	ENA_TOUCH(rsp);
 	ENA_TOUCH(ena_dev);
-	ENA_TOUCH(buf_size);
-	if (buf != (char *)&adapter->metrics_stats)
-		rte_memcpy(buf, &adapter->metrics_stats, adapter->metrics_num * sizeof(uint64_t));
+	if (buf != (char *)adapter->metrics_stats)
+		rte_memcpy(buf, adapter->metrics_stats, buf_size);
 }),
 	struct ena_com_dev *ena_dev, char *buf, size_t buf_size);
 
@@ -4088,7 +4087,7 @@ ena_mp_primary_handle(const struct rte_mp_msg *mp_msg, const void *peer)
 	case ENA_MP_CUSTOMER_METRICS_GET:
 		res = ena_com_get_customer_metrics(ena_dev,
 				(char *)adapter->metrics_stats,
-				sizeof(uint64_t) * adapter->metrics_num);
+				adapter->metrics_num * sizeof(uint64_t));
 		break;
 	case ENA_MP_SRD_STATS_GET:
 		res = ena_com_get_ena_srd_info(ena_dev,
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 02/33] net/ena: report new supported link speed capabilities
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
  2024-03-04 12:29 ` [PATCH v2 01/33] net/ena: rework the metrics multi-process functions shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 03/33] net/ena: update imissed stat with Rx overruns shaibran
                   ` (30 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Updated the rte_eth_dev_info device supported speed
bitmap to include 200Gbps and 400Gbps capabilities.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/ena_ethdev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index 6d500bfa78..b1e7de0541 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -2542,7 +2542,9 @@ static int ena_infos_get(struct rte_eth_dev *dev,
 			RTE_ETH_LINK_SPEED_25G  |
 			RTE_ETH_LINK_SPEED_40G  |
 			RTE_ETH_LINK_SPEED_50G  |
-			RTE_ETH_LINK_SPEED_100G;
+			RTE_ETH_LINK_SPEED_100G |
+			RTE_ETH_LINK_SPEED_200G |
+			RTE_ETH_LINK_SPEED_400G;
 
 	/* Inform framework about available features */
 	dev_info->rx_offload_capa = ena_get_rx_port_offloads(adapter);
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 03/33] net/ena: update imissed stat with Rx overruns
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
  2024-03-04 12:29 ` [PATCH v2 01/33] net/ena: rework the metrics multi-process functions shaibran
  2024-03-04 12:29 ` [PATCH v2 02/33] net/ena: report new supported link speed capabilities shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 04/33] net/ena: sub-optimal configuration notifications support shaibran
                   ` (29 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Depending on its acceleration support, the device updates
a different statistic when an ingress packet is dropped
because no buffers are available to hold it.
- In AWS instance types from later generations
'rx_overruns' is updated.
- Otherwise, in legacy instance types,
'rx_dropped_cnt' is updated.

That is, there is no need to report rx_overruns separately
as an xstat and the driver can simply sum up the two
self-contained counters as the 'imissed' statistic.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 doc/guides/rel_notes/release_24_03.rst | 4 ++++
 drivers/net/ena/ena_ethdev.c           | 8 +++++---
 drivers/net/ena/ena_ethdev.h           | 1 -
 3 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/doc/guides/rel_notes/release_24_03.rst b/doc/guides/rel_notes/release_24_03.rst
index 879bb4944c..fb66d67d32 100644
--- a/doc/guides/rel_notes/release_24_03.rst
+++ b/doc/guides/rel_notes/release_24_03.rst
@@ -101,6 +101,10 @@ New Features
   * ``rte_flow_template_table_resize_complete()``.
     Complete table resize.
 
+* **Updated Amazon ena (Elastic Network Adapter) net driver.**
+
+  * Removed the reporting of `rx_overruns` errors from xstats and instead updated `imissed` stat with its value.
+
 * **Updated Atomic Rules' Arkville driver.**
 
   * Added support for Atomic Rules' TK242 packet-capture family of devices
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index b1e7de0541..d3f395a832 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -93,7 +93,6 @@ static const struct ena_stats ena_stats_global_strings[] = {
 	ENA_STAT_GLOBAL_ENTRY(dev_start),
 	ENA_STAT_GLOBAL_ENTRY(dev_stop),
 	ENA_STAT_GLOBAL_ENTRY(tx_drops),
-	ENA_STAT_GLOBAL_ENTRY(rx_overruns),
 };
 
 /*
@@ -4014,9 +4013,12 @@ static void ena_keep_alive(void *adapter_data,
 	tx_drops = ((uint64_t)desc->tx_drops_high << 32) | desc->tx_drops_low;
 	rx_overruns = ((uint64_t)desc->rx_overruns_high << 32) | desc->rx_overruns_low;
 
-	adapter->drv_stats->rx_drops = rx_drops;
+	/*
+	 * Depending on its acceleration support, the device updates a different statistic when
+	 * Rx packet is dropped because there are no available buffers to accommodate it.
+	 */
+	adapter->drv_stats->rx_drops = rx_drops + rx_overruns;
 	adapter->dev_stats.tx_drops = tx_drops;
-	adapter->dev_stats.rx_overruns = rx_overruns;
 }
 
 /**
diff --git a/drivers/net/ena/ena_ethdev.h b/drivers/net/ena/ena_ethdev.h
index 4988fbffb5..20b8307836 100644
--- a/drivers/net/ena/ena_ethdev.h
+++ b/drivers/net/ena/ena_ethdev.h
@@ -219,7 +219,6 @@ struct ena_stats_dev {
 	 * As a workaround it is being published as an extended statistic.
 	 */
 	u64 tx_drops;
-	u64 rx_overruns;
 };
 
 struct ena_stats_metrics {
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 04/33] net/ena: sub-optimal configuration notifications support
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (2 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 03/33] net/ena: update imissed stat with Rx overruns shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 05/33] net/ena: fix fast mbuf free shaibran
                   ` (28 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

ENA device will send asynchronous notifications to the
driver in order to notify users about sub-optimal configurations
and refer them to public AWS documentation for further action.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 doc/guides/rel_notes/release_24_03.rst        |  1 +
 .../net/ena/base/ena_defs/ena_admin_defs.h    | 11 +++++++-
 drivers/net/ena/ena_ethdev.c                  | 26 +++++++++++++++++--
 3 files changed, 35 insertions(+), 3 deletions(-)

diff --git a/doc/guides/rel_notes/release_24_03.rst b/doc/guides/rel_notes/release_24_03.rst
index fb66d67d32..f47073c7dc 100644
--- a/doc/guides/rel_notes/release_24_03.rst
+++ b/doc/guides/rel_notes/release_24_03.rst
@@ -104,6 +104,7 @@ New Features
 * **Updated Amazon ena (Elastic Network Adapter) net driver.**
 
   * Removed the reporting of `rx_overruns` errors from xstats and instead updated `imissed` stat with its value.
+  * Added support for sub-optimal configuration notifications from the device.
 
 * **Updated Atomic Rules' Arkville driver.**
 
diff --git a/drivers/net/ena/base/ena_defs/ena_admin_defs.h b/drivers/net/ena/base/ena_defs/ena_admin_defs.h
index fa43e22918..4172916551 100644
--- a/drivers/net/ena/base/ena_defs/ena_admin_defs.h
+++ b/drivers/net/ena/base/ena_defs/ena_admin_defs.h
@@ -1214,7 +1214,8 @@ enum ena_admin_aenq_group {
 	ENA_ADMIN_NOTIFICATION                      = 3,
 	ENA_ADMIN_KEEP_ALIVE                        = 4,
 	ENA_ADMIN_REFRESH_CAPABILITIES              = 5,
-	ENA_ADMIN_AENQ_GROUPS_NUM                   = 6,
+	ENA_ADMIN_CONF_NOTIFICATIONS                = 6,
+	ENA_ADMIN_AENQ_GROUPS_NUM                   = 7,
 };
 
 enum ena_admin_aenq_notification_syndrome {
@@ -1251,6 +1252,14 @@ struct ena_admin_aenq_keep_alive_desc {
 	uint32_t rx_overruns_high;
 };
 
+struct ena_admin_aenq_conf_notifications_desc {
+	struct ena_admin_aenq_common_desc aenq_common_desc;
+
+	uint64_t notifications_bitmap;
+
+	uint64_t reserved;
+};
+
 struct ena_admin_ena_mmio_req_read_less_resp {
 	uint16_t req_id;
 
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index d3f395a832..3157237c0d 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -36,6 +36,10 @@
 
 #define ENA_MIN_RING_DESC	128
 
+#define BITS_PER_BYTE 8
+
+#define BITS_PER_TYPE(type) (sizeof(type) * BITS_PER_BYTE)
+
 /*
  * We should try to keep ENA_CLEANUP_BUF_SIZE lower than
  * RTE_MEMPOOL_CACHE_MAX_SIZE, so we can fit this in mempool local cache.
@@ -1842,7 +1846,8 @@ static int ena_device_init(struct ena_adapter *adapter,
 		      BIT(ENA_ADMIN_NOTIFICATION) |
 		      BIT(ENA_ADMIN_KEEP_ALIVE) |
 		      BIT(ENA_ADMIN_FATAL_ERROR) |
-		      BIT(ENA_ADMIN_WARNING);
+		      BIT(ENA_ADMIN_WARNING) |
+		      BIT(ENA_ADMIN_CONF_NOTIFICATIONS);
 
 	aenq_groups &= get_feat_ctx->aenq.supported_groups;
 
@@ -4021,6 +4026,22 @@ static void ena_keep_alive(void *adapter_data,
 	adapter->dev_stats.tx_drops = tx_drops;
 }
 
+static void ena_suboptimal_configuration(__rte_unused void *adapter_data,
+					 struct ena_admin_aenq_entry *aenq_e)
+{
+	struct ena_admin_aenq_conf_notifications_desc *desc;
+	int bit, num_bits;
+
+	desc = (struct ena_admin_aenq_conf_notifications_desc *)aenq_e;
+	num_bits = BITS_PER_TYPE(desc->notifications_bitmap);
+	for (bit = 0; bit < num_bits; bit++) {
+		if (desc->notifications_bitmap & RTE_BIT64(bit)) {
+			PMD_DRV_LOG(WARNING,
+				"Sub-optimal configuration notification code: %d\n", bit + 1);
+		}
+	}
+}
+
 /**
  * This handler will called for unknown event group or unimplemented handlers
  **/
@@ -4035,7 +4056,8 @@ static struct ena_aenq_handlers aenq_handlers = {
 	.handlers = {
 		[ENA_ADMIN_LINK_CHANGE] = ena_update_on_link_change,
 		[ENA_ADMIN_NOTIFICATION] = ena_notification,
-		[ENA_ADMIN_KEEP_ALIVE] = ena_keep_alive
+		[ENA_ADMIN_KEEP_ALIVE] = ena_keep_alive,
+		[ENA_ADMIN_CONF_NOTIFICATIONS] = ena_suboptimal_configuration
 	},
 	.unimplemented_handler = unimplemented_aenq_handler
 };
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 05/33] net/ena: fix fast mbuf free
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (3 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 04/33] net/ena: sub-optimal configuration notifications support shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 06/33] net/ena: rename base folder to hal shaibran
                   ` (27 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes, stable

From: Shai Brandes <shaibran@amazon.com>

In case the application enables fast mbuf release optimization,
the driver releases 256 TX mbufs in bulk upon reaching the
TX free threshold.
The existing implementation utilizes rte_mempool_put_bulk for bulk
freeing TXs, which exclusively supports direct mbufs.
In case the application transmits indirect bufs, the driver must
also decrement the mbuf reference count and unlink the mbuf segment.
For such case, the driver should employ rte_pktmbuf_free_bulk.

Fixes: c339f53823f3 ("net/ena: support fast mbuf free")
Cc: stable@dpdk.org

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 doc/guides/rel_notes/release_24_03.rst | 1 +
 drivers/net/ena/ena_ethdev.c           | 6 ++----
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/doc/guides/rel_notes/release_24_03.rst b/doc/guides/rel_notes/release_24_03.rst
index f47073c7dc..6b73d4fedf 100644
--- a/doc/guides/rel_notes/release_24_03.rst
+++ b/doc/guides/rel_notes/release_24_03.rst
@@ -105,6 +105,7 @@ New Features
 
   * Removed the reporting of `rx_overruns` errors from xstats and instead updated `imissed` stat with its value.
   * Added support for sub-optimal configuration notifications from the device.
+  * Restructured fast release of mbufs when RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE optimization is enabled.
 
 * **Updated Atomic Rules' Arkville driver.**
 
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index 3157237c0d..537ee9f8c3 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -3122,8 +3122,7 @@ ena_tx_cleanup_mbuf_fast(struct rte_mbuf **mbufs_to_clean,
 		m_next = mbuf->next;
 		mbufs_to_clean[mbuf_cnt++] = mbuf;
 		if (mbuf_cnt == buf_size) {
-			rte_mempool_put_bulk(mbufs_to_clean[0]->pool, (void **)mbufs_to_clean,
-				(unsigned int)mbuf_cnt);
+			rte_pktmbuf_free_bulk(mbufs_to_clean, mbuf_cnt);
 			mbuf_cnt = 0;
 		}
 		mbuf = m_next;
@@ -3191,8 +3190,7 @@ static int ena_tx_cleanup(void *txp, uint32_t free_pkt_cnt)
 	}
 
 	if (mbuf_cnt != 0)
-		rte_mempool_put_bulk(mbufs_to_clean[0]->pool,
-			(void **)mbufs_to_clean, mbuf_cnt);
+		rte_pktmbuf_free_bulk(mbufs_to_clean, mbuf_cnt);
 
 	/* Notify completion handler that full cleanup was performed */
 	if (free_pkt_cnt == 0 || total_tx_pkts < cleanup_budget)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 06/33] net/ena: rename base folder to hal
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (4 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 05/33] net/ena: fix fast mbuf free shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 07/33] net/ena: restructure the llq policy setting process shaibran
                   ` (26 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Changed the base HAL folder to hal.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/{base => hal}/ena_com.c                  | 0
 drivers/net/ena/{base => hal}/ena_com.h                  | 0
 drivers/net/ena/{base => hal}/ena_defs/ena_admin_defs.h  | 0
 drivers/net/ena/{base => hal}/ena_defs/ena_common_defs.h | 0
 drivers/net/ena/{base => hal}/ena_defs/ena_eth_io_defs.h | 0
 drivers/net/ena/{base => hal}/ena_defs/ena_gen_info.h    | 0
 drivers/net/ena/{base => hal}/ena_defs/ena_includes.h    | 0
 drivers/net/ena/{base => hal}/ena_defs/ena_regs_defs.h   | 0
 drivers/net/ena/{base => hal}/ena_eth_com.c              | 0
 drivers/net/ena/{base => hal}/ena_eth_com.h              | 0
 drivers/net/ena/{base => hal}/ena_plat.h                 | 0
 drivers/net/ena/{base => hal}/ena_plat_dpdk.h            | 0
 drivers/net/ena/meson.build                              | 6 +++---
 13 files changed, 3 insertions(+), 3 deletions(-)
 rename drivers/net/ena/{base => hal}/ena_com.c (100%)
 rename drivers/net/ena/{base => hal}/ena_com.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_admin_defs.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_common_defs.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_eth_io_defs.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_gen_info.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_includes.h (100%)
 rename drivers/net/ena/{base => hal}/ena_defs/ena_regs_defs.h (100%)
 rename drivers/net/ena/{base => hal}/ena_eth_com.c (100%)
 rename drivers/net/ena/{base => hal}/ena_eth_com.h (100%)
 rename drivers/net/ena/{base => hal}/ena_plat.h (100%)
 rename drivers/net/ena/{base => hal}/ena_plat_dpdk.h (100%)

diff --git a/drivers/net/ena/base/ena_com.c b/drivers/net/ena/hal/ena_com.c
similarity index 100%
rename from drivers/net/ena/base/ena_com.c
rename to drivers/net/ena/hal/ena_com.c
diff --git a/drivers/net/ena/base/ena_com.h b/drivers/net/ena/hal/ena_com.h
similarity index 100%
rename from drivers/net/ena/base/ena_com.h
rename to drivers/net/ena/hal/ena_com.h
diff --git a/drivers/net/ena/base/ena_defs/ena_admin_defs.h b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
similarity index 100%
rename from drivers/net/ena/base/ena_defs/ena_admin_defs.h
rename to drivers/net/ena/hal/ena_defs/ena_admin_defs.h
diff --git a/drivers/net/ena/base/ena_defs/ena_common_defs.h b/drivers/net/ena/hal/ena_defs/ena_common_defs.h
similarity index 100%
rename from drivers/net/ena/base/ena_defs/ena_common_defs.h
rename to drivers/net/ena/hal/ena_defs/ena_common_defs.h
diff --git a/drivers/net/ena/base/ena_defs/ena_eth_io_defs.h b/drivers/net/ena/hal/ena_defs/ena_eth_io_defs.h
similarity index 100%
rename from drivers/net/ena/base/ena_defs/ena_eth_io_defs.h
rename to drivers/net/ena/hal/ena_defs/ena_eth_io_defs.h
diff --git a/drivers/net/ena/base/ena_defs/ena_gen_info.h b/drivers/net/ena/hal/ena_defs/ena_gen_info.h
similarity index 100%
rename from drivers/net/ena/base/ena_defs/ena_gen_info.h
rename to drivers/net/ena/hal/ena_defs/ena_gen_info.h
diff --git a/drivers/net/ena/base/ena_defs/ena_includes.h b/drivers/net/ena/hal/ena_defs/ena_includes.h
similarity index 100%
rename from drivers/net/ena/base/ena_defs/ena_includes.h
rename to drivers/net/ena/hal/ena_defs/ena_includes.h
diff --git a/drivers/net/ena/base/ena_defs/ena_regs_defs.h b/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
similarity index 100%
rename from drivers/net/ena/base/ena_defs/ena_regs_defs.h
rename to drivers/net/ena/hal/ena_defs/ena_regs_defs.h
diff --git a/drivers/net/ena/base/ena_eth_com.c b/drivers/net/ena/hal/ena_eth_com.c
similarity index 100%
rename from drivers/net/ena/base/ena_eth_com.c
rename to drivers/net/ena/hal/ena_eth_com.c
diff --git a/drivers/net/ena/base/ena_eth_com.h b/drivers/net/ena/hal/ena_eth_com.h
similarity index 100%
rename from drivers/net/ena/base/ena_eth_com.h
rename to drivers/net/ena/hal/ena_eth_com.h
diff --git a/drivers/net/ena/base/ena_plat.h b/drivers/net/ena/hal/ena_plat.h
similarity index 100%
rename from drivers/net/ena/base/ena_plat.h
rename to drivers/net/ena/hal/ena_plat.h
diff --git a/drivers/net/ena/base/ena_plat_dpdk.h b/drivers/net/ena/hal/ena_plat_dpdk.h
similarity index 100%
rename from drivers/net/ena/base/ena_plat_dpdk.h
rename to drivers/net/ena/hal/ena_plat_dpdk.h
diff --git a/drivers/net/ena/meson.build b/drivers/net/ena/meson.build
index d02ed3f64f..c41f1b04a0 100644
--- a/drivers/net/ena/meson.build
+++ b/drivers/net/ena/meson.build
@@ -10,10 +10,10 @@ endif
 sources = files(
         'ena_ethdev.c',
         'ena_rss.c',
-        'base/ena_com.c',
-        'base/ena_eth_com.c',
+        'hal/ena_com.c',
+        'hal/ena_eth_com.c',
 )
 
 deps += ['timer']
 
-includes += include_directories('base', 'base/ena_defs')
+includes += include_directories('hal', 'hal/ena_defs')
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 07/33] net/ena: restructure the llq policy setting process
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (5 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 06/33] net/ena: rename base folder to hal shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 08/33] net/ena/hal: exponential backoff exp limit shaibran
                   ` (25 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

The driver will set the size of the LLQ header size according to the
recommendation from the device.
Replaced `enable_llq` and `large_llq_hdr` devargs with
a new devarg `llq_policy` that accepts the following values:
0 - Disable LLQ.
    Use with extreme caution as it leads to a huge performance
    degradation on AWS instances from 6th generation onwards.
1 - Accept device recommended LLQ policy (Default).
    Device can recommend normal or large LLQ policy.
2 - Enforce normal LLQ policy.
3 - Enforce large LLQ policy.
    Required for packets with header that exceed 96 bytes on
    AWS instances prior to 5th generation.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 doc/guides/nics/ena.rst                |  21 ++---
 doc/guides/rel_notes/release_24_03.rst |   1 +
 drivers/net/ena/ena_ethdev.c           | 110 +++++++++++++------------
 drivers/net/ena/ena_ethdev.h           |  11 ++-
 4 files changed, 77 insertions(+), 66 deletions(-)

diff --git a/doc/guides/nics/ena.rst b/doc/guides/nics/ena.rst
index b039e75ead..53c9341859 100644
--- a/doc/guides/nics/ena.rst
+++ b/doc/guides/nics/ena.rst
@@ -107,11 +107,15 @@ Configuration
 Runtime Configuration
 ^^^^^^^^^^^^^^^^^^^^^
 
-   * **large_llq_hdr** (default 0)
+   * **llq_policy** (default 1)
 
-     Enables or disables usage of large LLQ headers. This option will have
-     effect only if the device also supports large LLQ headers. Otherwise, the
-     default value will be used.
+     Controls whether use device recommended header policy or override it.
+     0 - Disable LLQ.
+         **Use with extreme caution as it leads to a huge performance
+         degradation on AWS instances from 6th generation onwards.**
+     1 - Accept device recommended LLQ policy (Default).
+     2 - Enforce normal LLQ policy.
+     3 - Enforce large LLQ policy.
 
    * **miss_txc_to** (default 5)
 
@@ -122,15 +126,6 @@ Runtime Configuration
      timer service. Setting this parameter to 0 disables this feature. Maximum
      allowed value is 60 seconds.
 
-   * **enable_llq** (default 1)
-
-     Determines whenever the driver should use the LLQ (if it's available) or
-     not.
-
-     **NOTE: On the 6th generation AWS instances disabling LLQ may lead to a
-     huge performance degradation. In general disabling LLQ is highly not
-     recommended!**
-
 ENA Configuration Parameters
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
diff --git a/doc/guides/rel_notes/release_24_03.rst b/doc/guides/rel_notes/release_24_03.rst
index 6b73d4fedf..2a22bb07ed 100644
--- a/doc/guides/rel_notes/release_24_03.rst
+++ b/doc/guides/rel_notes/release_24_03.rst
@@ -106,6 +106,7 @@ New Features
   * Removed the reporting of `rx_overruns` errors from xstats and instead updated `imissed` stat with its value.
   * Added support for sub-optimal configuration notifications from the device.
   * Restructured fast release of mbufs when RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE optimization is enabled.
+  * Replaced `enable_llq` and `large_llq_hdr` devargs with a new devarg `llq_policy`.
 
 * **Updated Atomic Rules' Arkville driver.**
 
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index 537ee9f8c3..2414f631c8 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -40,6 +40,8 @@
 
 #define BITS_PER_TYPE(type) (sizeof(type) * BITS_PER_BYTE)
 
+#define DECIMAL_BASE 10
+
 /*
  * We should try to keep ENA_CLEANUP_BUF_SIZE lower than
  * RTE_MEMPOOL_CACHE_MAX_SIZE, so we can fit this in mempool local cache.
@@ -74,17 +76,23 @@ struct ena_stats {
 	ENA_STAT_ENTRY(stat, srd)
 
 /* Device arguments */
-#define ENA_DEVARG_LARGE_LLQ_HDR "large_llq_hdr"
+/* Controls whether to disable LLQ, use device recommended header policy
+ * or overriding the device recommendation.
+ * 0 - Disable LLQ.
+ *     Use with extreme caution as it leads to a huge performance
+ *     degradation on AWS instances from 6th generation onwards.
+ * 1 - Accept device recommended LLQ policy (Default).
+ *     Device can recommend normal or large LLQ policy.
+ * 2 - Enforce normal LLQ policy.
+ * 3 - Enforce large LLQ policy.
+ *     Required for packets with header that exceed 96 bytes on
+ *     AWS instances prior to 5th generation.
+ */
+#define ENA_DEVARG_LLQ_POLICY "llq_policy"
 /* Timeout in seconds after which a single uncompleted Tx packet should be
  * considered as a missing.
  */
 #define ENA_DEVARG_MISS_TXC_TO "miss_txc_to"
-/*
- * Controls whether LLQ should be used (if available). Enabled by default.
- * NOTE: It's highly not recommended to disable the LLQ, as it may lead to a
- * huge performance degradation on 6th generation AWS instances.
- */
-#define ENA_DEVARG_ENABLE_LLQ "enable_llq"
 
 /*
  * Each rte_memzone should have unique name.
@@ -279,9 +287,9 @@ static int ena_xstats_get_by_id(struct rte_eth_dev *dev,
 				const uint64_t *ids,
 				uint64_t *values,
 				unsigned int n);
-static int ena_process_bool_devarg(const char *key,
-				   const char *value,
-				   void *opaque);
+static int ena_process_llq_policy_devarg(const char *key,
+					 const char *value,
+					 void *opaque);
 static int ena_parse_devargs(struct ena_adapter *adapter,
 			     struct rte_devargs *devargs);
 static void ena_copy_customer_metrics(struct ena_adapter *adapter,
@@ -297,6 +305,7 @@ static int ena_rx_queue_intr_disable(struct rte_eth_dev *dev,
 static int ena_configure_aenq(struct ena_adapter *adapter);
 static int ena_mp_primary_handle(const struct rte_mp_msg *mp_msg,
 				 const void *peer);
+static bool ena_use_large_llq_hdr(struct ena_adapter *adapter, uint8_t recommended_entry_size);
 
 static const struct eth_dev_ops ena_dev_ops = {
 	.dev_configure          = ena_dev_configure,
@@ -1135,6 +1144,7 @@ ena_calc_io_queue_size(struct ena_calc_queue_size_ctx *ctx,
 	ctx->max_tx_queue_size = max_tx_queue_size;
 	ctx->max_rx_queue_size = max_rx_queue_size;
 
+	PMD_DRV_LOG(INFO, "tx queue size %u\n", max_tx_queue_size);
 	return 0;
 }
 
@@ -2034,7 +2044,7 @@ ena_set_queues_placement_policy(struct ena_adapter *adapter,
 	int rc;
 	u32 llq_feature_mask;
 
-	if (!adapter->enable_llq) {
+	if (adapter->llq_header_policy == ENA_LLQ_POLICY_DISABLED) {
 		PMD_DRV_LOG(WARNING,
 			"NOTE: LLQ has been disabled as per user's request. "
 			"This may lead to a huge performance degradation!\n");
@@ -2239,8 +2249,7 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
 
 	/* Assign default devargs values */
 	adapter->missing_tx_completion_to = ENA_TX_TIMEOUT;
-	adapter->enable_llq = true;
-	adapter->use_large_llq_hdr = false;
+	adapter->llq_header_policy = ENA_LLQ_POLICY_RECOMMENDED;
 
 	rc = ena_parse_devargs(adapter, pci_dev->device.devargs);
 	if (rc != 0) {
@@ -2264,8 +2273,9 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
 	if (!(adapter->all_aenq_groups & BIT(ENA_ADMIN_LINK_CHANGE)))
 		adapter->edev_data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
 
-	set_default_llq_configurations(&llq_config, &get_feat_ctx.llq,
-		adapter->use_large_llq_hdr);
+	bool use_large_llq_hdr = ena_use_large_llq_hdr(adapter,
+						       get_feat_ctx.llq.entry_size_recommended);
+	set_default_llq_configurations(&llq_config, &get_feat_ctx.llq, use_large_llq_hdr);
 	rc = ena_set_queues_placement_policy(adapter, ena_dev,
 					     &get_feat_ctx.llq, &llq_config);
 	if (unlikely(rc)) {
@@ -2273,18 +2283,19 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
 		return rc;
 	}
 
-	if (ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_HOST)
+	if (ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_HOST) {
 		queue_type_str = "Regular";
-	else
+	} else {
 		queue_type_str = "Low latency";
+		PMD_DRV_LOG(INFO, "LLQ entry size %uB\n", llq_config.llq_ring_entry_size_value);
+	}
 	PMD_DRV_LOG(INFO, "Placement policy: %s\n", queue_type_str);
 
 	calc_queue_ctx.ena_dev = ena_dev;
 	calc_queue_ctx.get_feat_ctx = &get_feat_ctx;
 
 	max_num_io_queues = ena_calc_max_io_queue_num(ena_dev, &get_feat_ctx);
-	rc = ena_calc_io_queue_size(&calc_queue_ctx,
-		adapter->use_large_llq_hdr);
+	rc = ena_calc_io_queue_size(&calc_queue_ctx, use_large_llq_hdr);
 	if (unlikely((rc != 0) || (max_num_io_queues == 0))) {
 		rc = -EFAULT;
 		goto err_device_destroy;
@@ -3632,7 +3643,7 @@ static int ena_process_uint_devarg(const char *key,
 	char *str_end;
 	uint64_t uint_value;
 
-	uint_value = strtoull(value, &str_end, 10);
+	uint_value = strtoull(value, &str_end, DECIMAL_BASE);
 	if (value == str_end) {
 		PMD_INIT_LOG(ERR,
 			"Invalid value for key '%s'. Only uint values are accepted.\n",
@@ -3663,41 +3674,29 @@ static int ena_process_uint_devarg(const char *key,
 	return 0;
 }
 
-static int ena_process_bool_devarg(const char *key,
-				   const char *value,
-				   void *opaque)
+static int ena_process_llq_policy_devarg(const char *key, const char *value, void *opaque)
 {
 	struct ena_adapter *adapter = opaque;
-	bool bool_value;
+	uint32_t policy;
 
-	/* Parse the value. */
-	if (strcmp(value, "1") == 0) {
-		bool_value = true;
-	} else if (strcmp(value, "0") == 0) {
-		bool_value = false;
+	policy = strtoul(value, NULL, DECIMAL_BASE);
+	if (policy < ENA_LLQ_POLICY_LAST) {
+		adapter->llq_header_policy = policy;
 	} else {
-		PMD_INIT_LOG(ERR,
-			"Invalid value: '%s' for key '%s'. Accepted: '0' or '1'\n",
-			value, key);
+		PMD_INIT_LOG(ERR, "Invalid value: '%s' for key '%s'. valid [0-3]\n", value, key);
 		return -EINVAL;
 	}
-
-	/* Now, assign it to the proper adapter field. */
-	if (strcmp(key, ENA_DEVARG_LARGE_LLQ_HDR) == 0)
-		adapter->use_large_llq_hdr = bool_value;
-	else if (strcmp(key, ENA_DEVARG_ENABLE_LLQ) == 0)
-		adapter->enable_llq = bool_value;
-
+	PMD_DRV_LOG(INFO,
+		"LLQ policy is %u [0 - disabled, 1 - device recommended, 2 - normal, 3 - large]\n",
+		adapter->llq_header_policy);
 	return 0;
 }
 
-static int ena_parse_devargs(struct ena_adapter *adapter,
-			     struct rte_devargs *devargs)
+static int ena_parse_devargs(struct ena_adapter *adapter, struct rte_devargs *devargs)
 {
 	static const char * const allowed_args[] = {
-		ENA_DEVARG_LARGE_LLQ_HDR,
+		ENA_DEVARG_LLQ_POLICY,
 		ENA_DEVARG_MISS_TXC_TO,
-		ENA_DEVARG_ENABLE_LLQ,
 		NULL,
 	};
 	struct rte_kvargs *kvlist;
@@ -3708,21 +3707,18 @@ static int ena_parse_devargs(struct ena_adapter *adapter,
 
 	kvlist = rte_kvargs_parse(devargs->args, allowed_args);
 	if (kvlist == NULL) {
-		PMD_INIT_LOG(ERR, "Invalid device arguments: %s\n",
-			devargs->args);
+		PMD_INIT_LOG(ERR, "Invalid device arguments: %s\n", devargs->args);
 		return -EINVAL;
 	}
 
-	rc = rte_kvargs_process(kvlist, ENA_DEVARG_LARGE_LLQ_HDR,
-		ena_process_bool_devarg, adapter);
+	rc = rte_kvargs_process(kvlist, ENA_DEVARG_LLQ_POLICY,
+		ena_process_llq_policy_devarg, adapter);
 	if (rc != 0)
 		goto exit;
 	rc = rte_kvargs_process(kvlist, ENA_DEVARG_MISS_TXC_TO,
 		ena_process_uint_devarg, adapter);
 	if (rc != 0)
 		goto exit;
-	rc = rte_kvargs_process(kvlist, ENA_DEVARG_ENABLE_LLQ,
-		ena_process_bool_devarg, adapter);
 
 exit:
 	rte_kvargs_free(kvlist);
@@ -3942,8 +3938,7 @@ RTE_PMD_REGISTER_PCI(net_ena, rte_ena_pmd);
 RTE_PMD_REGISTER_PCI_TABLE(net_ena, pci_id_ena_map);
 RTE_PMD_REGISTER_KMOD_DEP(net_ena, "* igb_uio | uio_pci_generic | vfio-pci");
 RTE_PMD_REGISTER_PARAM_STRING(net_ena,
-	ENA_DEVARG_LARGE_LLQ_HDR "=<0|1> "
-	ENA_DEVARG_ENABLE_LLQ "=<0|1> "
+	ENA_DEVARG_LLQ_POLICY "=<0|1|2|3> "
 	ENA_DEVARG_MISS_TXC_TO "=<uint>");
 RTE_LOG_REGISTER_SUFFIX(ena_logtype_init, init, NOTICE);
 RTE_LOG_REGISTER_SUFFIX(ena_logtype_driver, driver, NOTICE);
@@ -4129,3 +4124,16 @@ ena_mp_primary_handle(const struct rte_mp_msg *mp_msg, const void *peer)
 	/* Return just IPC processing status */
 	return rte_mp_reply(&mp_rsp, peer);
 }
+
+static bool ena_use_large_llq_hdr(struct ena_adapter *adapter, uint8_t recommended_entry_size)
+{
+	if (adapter->llq_header_policy == ENA_LLQ_POLICY_LARGE) {
+		return true;
+	} else if (adapter->llq_header_policy == ENA_LLQ_POLICY_RECOMMENDED) {
+		PMD_DRV_LOG(INFO, "Recommended device entry size policy %u\n",
+			recommended_entry_size);
+		if (recommended_entry_size == ENA_ADMIN_LIST_ENTRY_SIZE_256B)
+			return true;
+	}
+	return false;
+}
diff --git a/drivers/net/ena/ena_ethdev.h b/drivers/net/ena/ena_ethdev.h
index 20b8307836..6716f01ba5 100644
--- a/drivers/net/ena/ena_ethdev.h
+++ b/drivers/net/ena/ena_ethdev.h
@@ -85,6 +85,14 @@ enum ena_ring_type {
 	ENA_RING_TYPE_TX = 2,
 };
 
+typedef enum ena_llq_policy_t {
+	ENA_LLQ_POLICY_DISABLED    = 0, /* Host queues */
+	ENA_LLQ_POLICY_RECOMMENDED = 1, /* Device recommendation */
+	ENA_LLQ_POLICY_NORMAL      = 2, /* 128B long LLQ entry */
+	ENA_LLQ_POLICY_LARGE       = 3, /* 256B long LLQ entry */
+	ENA_LLQ_POLICY_LAST,
+} ena_llq_policy;
+
 struct ena_tx_buffer {
 	struct rte_mbuf *mbuf;
 	unsigned int tx_descs;
@@ -329,8 +337,7 @@ struct ena_adapter {
 
 	bool trigger_reset;
 
-	bool enable_llq;
-	bool use_large_llq_hdr;
+	ena_llq_policy llq_header_policy;
 
 	uint32_t last_tx_comp_qid;
 	uint64_t missing_tx_completion_to;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 08/33] net/ena/hal: exponential backoff exp limit
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (6 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 07/33] net/ena: restructure the llq policy setting process shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 09/33] net/ena/hal: add a new csum offload bit shaibran
                   ` (24 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

limits the exponent in the exponential backoff
mechanism in order to avoid the value overflowing.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index 6953a1fa33..31c37b0ab3 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -34,6 +34,8 @@
 
 #define ENA_REGS_ADMIN_INTR_MASK 1
 
+#define ENA_MAX_BACKOFF_DELAY_EXP 16U
+
 #define ENA_MIN_ADMIN_POLL_US 100
 
 #define ENA_MAX_ADMIN_POLL_US 5000
@@ -545,8 +547,9 @@ static int ena_com_comp_status_to_errno(struct ena_com_admin_queue *admin_queue,
 
 static void ena_delay_exponential_backoff_us(u32 exp, u32 delay_us)
 {
+	exp = ENA_MIN32(ENA_MAX_BACKOFF_DELAY_EXP, exp);
 	delay_us = ENA_MAX32(ENA_MIN_ADMIN_POLL_US, delay_us);
-	delay_us = ENA_MIN32(delay_us * (1U << exp), ENA_MAX_ADMIN_POLL_US);
+	delay_us = ENA_MIN32(ENA_MAX_ADMIN_POLL_US, delay_us * (1U << exp));
 	ENA_USLEEP(delay_us);
 }
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 09/33] net/ena/hal: add a new csum offload bit
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (7 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 08/33] net/ena/hal: exponential backoff exp limit shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 10/33] net/ena/hal: added a bus parameter to ena memcpy macro shaibran
                   ` (23 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Add a new driver supported feature bit for TX IPv6 checksum offload.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_defs/ena_admin_defs.h | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
index 4172916551..670e794c98 100644
--- a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
@@ -985,7 +985,8 @@ struct ena_admin_host_info {
 	 * 4 : rss_configurable_function_key
 	 * 5 : reserved
 	 * 6 : rx_page_reuse
-	 * 31:7 : reserved
+	 * 7 : tx_ipv6_csum_offload
+	 * 31:8 : reserved
 	 */
 	uint32_t driver_supported_features;
 };
@@ -1377,6 +1378,8 @@ struct ena_admin_phc_resp {
 #define ENA_ADMIN_HOST_INFO_RSS_CONFIGURABLE_FUNCTION_KEY_MASK BIT(4)
 #define ENA_ADMIN_HOST_INFO_RX_PAGE_REUSE_SHIFT             6
 #define ENA_ADMIN_HOST_INFO_RX_PAGE_REUSE_MASK              BIT(6)
+#define ENA_ADMIN_HOST_INFO_TX_IPV6_CSUM_OFFLOAD_SHIFT      7
+#define ENA_ADMIN_HOST_INFO_TX_IPV6_CSUM_OFFLOAD_MASK       BIT(7)
 
 /* feature_rss_ind_table */
 #define ENA_ADMIN_FEATURE_RSS_IND_TABLE_ONE_ENTRY_UPDATE_MASK BIT(0)
@@ -1851,6 +1854,20 @@ static inline void set_ena_admin_host_info_rx_page_reuse(struct ena_admin_host_i
 			ENA_ADMIN_HOST_INFO_RX_PAGE_REUSE_MASK;
 }
 
+static inline
+uint32_t get_ena_admin_host_info_tx_ipv6_csum_offload(const struct ena_admin_host_info *p)
+{
+	return (p->driver_supported_features & ENA_ADMIN_HOST_INFO_TX_IPV6_CSUM_OFFLOAD_MASK) >>
+		ENA_ADMIN_HOST_INFO_TX_IPV6_CSUM_OFFLOAD_SHIFT;
+}
+
+static inline void set_ena_admin_host_info_tx_ipv6_csum_offload(struct ena_admin_host_info *p,
+								 uint32_t val)
+{
+	p->driver_supported_features |= (val << ENA_ADMIN_HOST_INFO_TX_IPV6_CSUM_OFFLOAD_SHIFT) &
+					 ENA_ADMIN_HOST_INFO_TX_IPV6_CSUM_OFFLOAD_MASK;
+}
+
 static inline uint8_t get_ena_admin_feature_rss_ind_table_one_entry_update(const struct ena_admin_feature_rss_ind_table *p)
 {
 	return p->flags & ENA_ADMIN_FEATURE_RSS_IND_TABLE_ONE_ENTRY_UPDATE_MASK;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 10/33] net/ena/hal: added a bus parameter to ena memcpy macro
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (8 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 09/33] net/ena/hal: add a new csum offload bit shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 11/33] net/ena/hal: optimize Rx ring submission queue shaibran
                   ` (22 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

ENA_MEMCPY_TO_DEVICE_64 macro needs pci bus id in order
to write to the device memory when using llq.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_eth_com.c   | 3 ++-
 drivers/net/ena/hal/ena_plat_dpdk.h | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ena/hal/ena_eth_com.c b/drivers/net/ena/hal/ena_eth_com.c
index 32090259cd..d6811c7b48 100644
--- a/drivers/net/ena/hal/ena_eth_com.c
+++ b/drivers/net/ena/hal/ena_eth_com.c
@@ -74,7 +74,8 @@ static int ena_com_write_bounce_buffer_to_dev(struct ena_com_io_sq *io_sq,
 	wmb();
 
 	/* The line is completed. Copy it to dev */
-	ENA_MEMCPY_TO_DEVICE_64(io_sq->desc_addr.pbuf_dev_addr + dst_offset,
+	ENA_MEMCPY_TO_DEVICE_64(io_sq->bus,
+				io_sq->desc_addr.pbuf_dev_addr + dst_offset,
 				bounce_buffer,
 				llq_info->desc_list_entry_size);
 
diff --git a/drivers/net/ena/hal/ena_plat_dpdk.h b/drivers/net/ena/hal/ena_plat_dpdk.h
index 14bf582a45..5f7cbd1ee7 100644
--- a/drivers/net/ena/hal/ena_plat_dpdk.h
+++ b/drivers/net/ena/hal/ena_plat_dpdk.h
@@ -301,11 +301,12 @@ ena_mem_alloc_coherent(struct rte_eth_dev_data *data, size_t size,
 #define ENA_WAIT_EVENTS_DESTROY(admin_queue) ((void)(admin_queue))
 
 /* The size must be 8 byte align */
-#define ENA_MEMCPY_TO_DEVICE_64(dst, src, size)				       \
+#define ENA_MEMCPY_TO_DEVICE_64(bus, dst, src, size)			       \
 	do {								       \
 		int count, i;						       \
 		uint64_t *to = (uint64_t *)(dst);			       \
 		const uint64_t *from = (const uint64_t *)(src);		       \
+		(void)(bus);						       \
 		count = (size) / 8;					       \
 		for (i = 0; i < count; i++, from++, to++)		       \
 			rte_write64_relaxed(*from, to);			       \
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 11/33] net/ena/hal: optimize Rx ring submission queue
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (9 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 10/33] net/ena/hal: added a bus parameter to ena memcpy macro shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 12/33] net/ena/hal: rename fields in completion descriptors shaibran
                   ` (21 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

RX ring submission queue descriptors are always located in host memory
This optimization replaces the generic descriptor retrieval method
with a tailored method for host memory type descriptors to avoid
unnecessary if statement.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_eth_com.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ena/hal/ena_eth_com.c b/drivers/net/ena/hal/ena_eth_com.c
index d6811c7b48..dc2935a53e 100644
--- a/drivers/net/ena/hal/ena_eth_com.c
+++ b/drivers/net/ena/hal/ena_eth_com.c
@@ -631,9 +631,8 @@ int ena_com_add_single_rx_desc(struct ena_com_io_sq *io_sq,
 	if (unlikely(!ena_com_sq_have_enough_space(io_sq, 1)))
 		return ENA_COM_NO_SPACE;
 
-	desc = get_sq_desc(io_sq);
-	if (unlikely(!desc))
-		return ENA_COM_FAULT;
+	/* virt_addr allocation success is checked before calling this function */
+	desc = get_sq_desc_regular_queue(io_sq);
 
 	memset(desc, 0x0, sizeof(struct ena_eth_io_rx_desc));
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 12/33] net/ena/hal: rename fields in completion descriptors
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (10 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 11/33] net/ena/hal: optimize Rx ring submission queue shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 13/33] net/ena/hal: use correct read once on u8 field shaibran
                   ` (20 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Several reserved bits in ena_eth_io_tx_cdesc and
ena_eth_io_rx_cdesc_base have been renamed explicitly to
MBZ (Must Be Zero).
These bits are set by the device to zero before being sent
to the driver. The fields are used as an integrity check in
order to ensure that the received descriptor is not corrupted.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_defs/ena_admin_defs.h |  1 +
 .../net/ena/hal/ena_defs/ena_eth_io_defs.h    | 49 +++++++++++++++++--
 2 files changed, 47 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
index 670e794c98..438e4a1085 100644
--- a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
@@ -84,6 +84,7 @@ enum ena_admin_aq_caps_id {
 	ENA_ADMIN_ENA_SRD_INFO                      = 1,
 	ENA_ADMIN_CUSTOMER_METRICS                  = 2,
 	ENA_ADMIN_EXTENDED_RESET_REASONS	    = 3,
+	ENA_ADMIN_CDESC_MBZ                         = 4,
 };
 
 enum ena_admin_placement_policy_type {
diff --git a/drivers/net/ena/hal/ena_defs/ena_eth_io_defs.h b/drivers/net/ena/hal/ena_defs/ena_eth_io_defs.h
index 2107d17fdf..f811dd261e 100644
--- a/drivers/net/ena/hal/ena_defs/ena_eth_io_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_eth_io_defs.h
@@ -152,7 +152,8 @@ struct ena_eth_io_tx_cdesc {
 
 	/* flags
 	 * 0 : phase
-	 * 7:1 : reserved1
+	 * 5:1 : reserved1
+	 * 7:6 : mbz6 - MBZ
 	 */
 	uint8_t flags;
 
@@ -198,7 +199,7 @@ struct ena_eth_io_rx_desc {
 struct ena_eth_io_rx_cdesc_base {
 	/* 4:0 : l3_proto_idx
 	 * 6:5 : src_vlan_cnt
-	 * 7 : reserved7 - MBZ
+	 * 7 : mbz7 - MBZ
 	 * 12:8 : l4_proto_idx
 	 * 13 : l3_csum_err - when set, either the L3
 	 *    checksum error detected, or, the controller didn't
@@ -214,7 +215,8 @@ struct ena_eth_io_rx_cdesc_base {
 	 * 16 : l4_csum_checked - L4 checksum was verified
 	 *    (could be OK or error), when cleared the status of
 	 *    checksum is unknown
-	 * 23:17 : reserved17 - MBZ
+	 * 17 : mbz17 - MBZ
+	 * 23:18 : reserved18
 	 * 24 : phase
 	 * 25 : l3_csum2 - second checksum engine result
 	 * 26 : first - Indicates first descriptor in
@@ -341,6 +343,8 @@ struct ena_eth_io_numa_node_cfg_reg {
 
 /* tx_cdesc */
 #define ENA_ETH_IO_TX_CDESC_PHASE_MASK                      BIT(0)
+#define ENA_ETH_IO_TX_CDESC_MBZ6_SHIFT                      6
+#define ENA_ETH_IO_TX_CDESC_MBZ6_MASK                       GENMASK(7, 6)
 
 /* rx_desc */
 #define ENA_ETH_IO_RX_DESC_PHASE_MASK                       BIT(0)
@@ -355,6 +359,8 @@ struct ena_eth_io_numa_node_cfg_reg {
 #define ENA_ETH_IO_RX_CDESC_BASE_L3_PROTO_IDX_MASK          GENMASK(4, 0)
 #define ENA_ETH_IO_RX_CDESC_BASE_SRC_VLAN_CNT_SHIFT         5
 #define ENA_ETH_IO_RX_CDESC_BASE_SRC_VLAN_CNT_MASK          GENMASK(6, 5)
+#define ENA_ETH_IO_RX_CDESC_BASE_MBZ7_SHIFT                 7
+#define ENA_ETH_IO_RX_CDESC_BASE_MBZ7_MASK                  BIT(7)
 #define ENA_ETH_IO_RX_CDESC_BASE_L4_PROTO_IDX_SHIFT         8
 #define ENA_ETH_IO_RX_CDESC_BASE_L4_PROTO_IDX_MASK          GENMASK(12, 8)
 #define ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM_ERR_SHIFT          13
@@ -365,6 +371,8 @@ struct ena_eth_io_numa_node_cfg_reg {
 #define ENA_ETH_IO_RX_CDESC_BASE_IPV4_FRAG_MASK             BIT(15)
 #define ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_CHECKED_SHIFT      16
 #define ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_CHECKED_MASK       BIT(16)
+#define ENA_ETH_IO_RX_CDESC_BASE_MBZ17_SHIFT                17
+#define ENA_ETH_IO_RX_CDESC_BASE_MBZ17_MASK                 BIT(17)
 #define ENA_ETH_IO_RX_CDESC_BASE_PHASE_SHIFT                24
 #define ENA_ETH_IO_RX_CDESC_BASE_PHASE_MASK                 BIT(24)
 #define ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM2_SHIFT             25
@@ -731,6 +739,15 @@ static inline void set_ena_eth_io_tx_cdesc_phase(struct ena_eth_io_tx_cdesc *p,
 	p->flags |= val & ENA_ETH_IO_TX_CDESC_PHASE_MASK;
 }
 
+static inline uint8_t get_ena_eth_io_tx_cdesc_mbz6(const struct ena_eth_io_tx_cdesc *p)
+{
+	return (p->flags & ENA_ETH_IO_TX_CDESC_MBZ6_MASK) >> ENA_ETH_IO_TX_CDESC_MBZ6_SHIFT;
+}
+static inline void set_ena_eth_io_tx_cdesc_mbz6(struct ena_eth_io_tx_cdesc *p, uint8_t val)
+{
+	p->flags |= (val << ENA_ETH_IO_TX_CDESC_MBZ6_SHIFT) & ENA_ETH_IO_TX_CDESC_MBZ6_MASK;
+}
+
 static inline uint8_t get_ena_eth_io_rx_desc_phase(const struct ena_eth_io_rx_desc *p)
 {
 	return p->ctrl & ENA_ETH_IO_RX_DESC_PHASE_MASK;
@@ -791,6 +808,19 @@ static inline void set_ena_eth_io_rx_cdesc_base_src_vlan_cnt(struct ena_eth_io_r
 	p->status |= (val << ENA_ETH_IO_RX_CDESC_BASE_SRC_VLAN_CNT_SHIFT) & ENA_ETH_IO_RX_CDESC_BASE_SRC_VLAN_CNT_MASK;
 }
 
+static inline uint32_t get_ena_eth_io_rx_cdesc_base_mbz7(const struct ena_eth_io_rx_cdesc_base *p)
+{
+	return (p->status & ENA_ETH_IO_RX_CDESC_BASE_MBZ7_MASK) >>
+		ENA_ETH_IO_RX_CDESC_BASE_MBZ7_SHIFT;
+}
+
+static inline void set_ena_eth_io_rx_cdesc_base_mbz7(struct ena_eth_io_rx_cdesc_base *p,
+							      uint32_t val)
+{
+	p->status |= (val << ENA_ETH_IO_RX_CDESC_BASE_MBZ7_SHIFT) &
+		      ENA_ETH_IO_RX_CDESC_BASE_MBZ7_MASK;
+}
+
 static inline uint32_t get_ena_eth_io_rx_cdesc_base_l4_proto_idx(const struct ena_eth_io_rx_cdesc_base *p)
 {
 	return (p->status & ENA_ETH_IO_RX_CDESC_BASE_L4_PROTO_IDX_MASK) >> ENA_ETH_IO_RX_CDESC_BASE_L4_PROTO_IDX_SHIFT;
@@ -841,6 +871,19 @@ static inline void set_ena_eth_io_rx_cdesc_base_l4_csum_checked(struct ena_eth_i
 	p->status |= (val << ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_CHECKED_SHIFT) & ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_CHECKED_MASK;
 }
 
+static inline uint32_t get_ena_eth_io_rx_cdesc_base_mbz17(const struct ena_eth_io_rx_cdesc_base *p)
+{
+	return (p->status & ENA_ETH_IO_RX_CDESC_BASE_MBZ17_MASK) >>
+		ENA_ETH_IO_RX_CDESC_BASE_MBZ17_SHIFT;
+}
+
+static inline void set_ena_eth_io_rx_cdesc_base_mbz17(struct ena_eth_io_rx_cdesc_base *p,
+								uint32_t val)
+{
+	p->status |= (val << ENA_ETH_IO_RX_CDESC_BASE_MBZ17_SHIFT) &
+		      ENA_ETH_IO_RX_CDESC_BASE_MBZ17_MASK;
+}
+
 static inline uint32_t get_ena_eth_io_rx_cdesc_base_phase(const struct ena_eth_io_rx_cdesc_base *p)
 {
 	return (p->status & ENA_ETH_IO_RX_CDESC_BASE_PHASE_MASK) >> ENA_ETH_IO_RX_CDESC_BASE_PHASE_SHIFT;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 13/33] net/ena/hal: use correct read once on u8 field
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (11 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 12/33] net/ena/hal: rename fields in completion descriptors shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 14/33] net/ena/hal: add completion descriptor corruption check shaibran
                   ` (19 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

The flags field in ena_eth_io_tx_cdesc is 8-bits long.
The current macro used is READ_ONCE16.
Switching to READ_ONCE8 to avoid reading extra data.
Given that there's an implicit cast to u8 in the assignment,
the correct value is being read, but this change makes it
even more accurate.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_eth_com.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ena/hal/ena_eth_com.h b/drivers/net/ena/hal/ena_eth_com.h
index cee4f35124..6a7c17f84f 100644
--- a/drivers/net/ena/hal/ena_eth_com.h
+++ b/drivers/net/ena/hal/ena_eth_com.h
@@ -219,7 +219,7 @@ static inline int ena_com_tx_comp_req_id_get(struct ena_com_io_cq *io_cq,
 	 * expected, it mean that the device still didn't update
 	 * this completion.
 	 */
-	cdesc_phase = READ_ONCE16(cdesc->flags) & ENA_ETH_IO_TX_CDESC_PHASE_MASK;
+	cdesc_phase = READ_ONCE8(cdesc->flags) & ENA_ETH_IO_TX_CDESC_PHASE_MASK;
 	if (cdesc_phase != expected_phase)
 		return ENA_COM_TRY_AGAIN;
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 14/33] net/ena/hal: add completion descriptor corruption check
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (12 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 13/33] net/ena/hal: use correct read once on u8 field shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 15/33] net/ena/hal: malformed Tx descriptor error reason shaibran
                   ` (18 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Adding a check of the MBZ (Must Be Zero) fields in the
incoming tx and rx completion descriptors in order to
identify corrupted descriptors.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_eth_com.c | 13 +++++++++++--
 drivers/net/ena/hal/ena_eth_com.h | 14 +++++++++++++-
 2 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ena/hal/ena_eth_com.c b/drivers/net/ena/hal/ena_eth_com.c
index dc2935a53e..988fa013a7 100644
--- a/drivers/net/ena/hal/ena_eth_com.c
+++ b/drivers/net/ena/hal/ena_eth_com.c
@@ -237,6 +237,7 @@ static int ena_com_cdesc_rx_pkt_get(struct ena_com_io_cq *io_cq,
 				    u16 *first_cdesc_idx,
 				    u16 *num_descs)
 {
+	struct ena_com_dev *dev = ena_com_io_cq_to_ena_dev(io_cq);
 	u16 count = io_cq->cur_rx_pkt_cdesc_count, head_masked;
 	struct ena_eth_io_rx_cdesc_base *cdesc;
 	u32 last = 0;
@@ -252,13 +253,21 @@ static int ena_com_cdesc_rx_pkt_get(struct ena_com_io_cq *io_cq,
 		ena_com_cq_inc_head(io_cq);
 		if (unlikely((status & ENA_ETH_IO_RX_CDESC_BASE_FIRST_MASK) >>
 		    ENA_ETH_IO_RX_CDESC_BASE_FIRST_SHIFT && count != 0)) {
-			struct ena_com_dev *dev = ena_com_io_cq_to_ena_dev(io_cq);
-
 			ena_trc_err(dev,
 				    "First bit is on in descriptor #%d on q_id: %d, req_id: %u\n",
 				    count, io_cq->qid, cdesc->req_id);
 			return ENA_COM_FAULT;
 		}
+
+		if (unlikely((status & (ENA_ETH_IO_RX_CDESC_BASE_MBZ7_MASK |
+					ENA_ETH_IO_RX_CDESC_BASE_MBZ17_MASK)) &&
+			      ena_com_get_cap(dev, ENA_ADMIN_CDESC_MBZ))) {
+			ena_trc_err(dev,
+				    "Corrupted RX descriptor #%d on q_id: %d, req_id: %u\n",
+				    count, io_cq->qid, cdesc->req_id);
+			return ENA_COM_FAULT;
+		}
+
 		count++;
 		last = (status & ENA_ETH_IO_RX_CDESC_BASE_LAST_MASK) >>
 			ENA_ETH_IO_RX_CDESC_BASE_LAST_SHIFT;
diff --git a/drivers/net/ena/hal/ena_eth_com.h b/drivers/net/ena/hal/ena_eth_com.h
index 6a7c17f84f..2fac10e678 100644
--- a/drivers/net/ena/hal/ena_eth_com.h
+++ b/drivers/net/ena/hal/ena_eth_com.h
@@ -204,9 +204,11 @@ static inline void ena_com_cq_inc_head(struct ena_com_io_cq *io_cq)
 static inline int ena_com_tx_comp_req_id_get(struct ena_com_io_cq *io_cq,
 					     u16 *req_id)
 {
+	struct ena_com_dev *dev = ena_com_io_cq_to_ena_dev(io_cq);
 	u8 expected_phase, cdesc_phase;
 	struct ena_eth_io_tx_cdesc *cdesc;
 	u16 masked_head;
+	u8 flags;
 
 	masked_head = io_cq->head & (io_cq->q_depth - 1);
 	expected_phase = io_cq->phase;
@@ -215,14 +217,24 @@ static inline int ena_com_tx_comp_req_id_get(struct ena_com_io_cq *io_cq,
 		((uintptr_t)io_cq->cdesc_addr.virt_addr +
 		(masked_head * io_cq->cdesc_entry_size_in_bytes));
 
+	flags = READ_ONCE8(cdesc->flags);
+
 	/* When the current completion descriptor phase isn't the same as the
 	 * expected, it mean that the device still didn't update
 	 * this completion.
 	 */
-	cdesc_phase = READ_ONCE8(cdesc->flags) & ENA_ETH_IO_TX_CDESC_PHASE_MASK;
+	cdesc_phase = flags & ENA_ETH_IO_TX_CDESC_PHASE_MASK;
 	if (cdesc_phase != expected_phase)
 		return ENA_COM_TRY_AGAIN;
 
+	if (unlikely((flags & ENA_ETH_IO_TX_CDESC_MBZ6_MASK) &&
+		      ena_com_get_cap(dev, ENA_ADMIN_CDESC_MBZ))) {
+		ena_trc_err(dev,
+			    "Corrupted TX descriptor on q_id: %d, req_id: %u\n",
+			    io_cq->qid, cdesc->req_id);
+		return ENA_COM_FAULT;
+	}
+
 	dma_rmb();
 
 	*req_id = READ_ONCE16(cdesc->req_id);
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 15/33] net/ena/hal: malformed Tx descriptor error reason
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (13 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 14/33] net/ena/hal: add completion descriptor corruption check shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 16/33] net/ena/hal: phc feature modifications shaibran
                   ` (17 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Adding ENA_REGS_RESET_TX_DESCRIPTOR_MALFORMED to identify
cases where the returned TX completion descriptors are
corrupted.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_defs/ena_regs_defs.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ena/hal/ena_defs/ena_regs_defs.h b/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
index 6a33f74812..a94025dc77 100644
--- a/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
@@ -23,6 +23,7 @@ enum ena_regs_reset_reason_types {
 	ENA_REGS_RESET_MISS_INTERRUPT               = 14,
 	ENA_REGS_RESET_SUSPECTED_POLL_STARVATION    = 15,
 	ENA_REGS_RESET_RX_DESCRIPTOR_MALFORMED	    = 16,
+	ENA_REGS_RESET_TX_DESCRIPTOR_MALFORMED	    = 17,
 	ENA_REGS_RESET_LAST,
 };
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 16/33] net/ena/hal: phc feature modifications
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (14 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 15/33] net/ena/hal: malformed Tx descriptor error reason shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 17/33] net/ena/hal: restructure interrupt handling shaibran
                   ` (16 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

1. PHC algorithm is updated to support reading new PHC values.
2. Update default PHC expiration timeout.
3. Fix a theoretical PHC destroy race.
4. Adjust PHC for multiple devices.
5. PHC activation version check point.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c                 | 111 ++++++++++++------
 drivers/net/ena/hal/ena_com.h                 |  31 +++--
 drivers/net/ena/hal/ena_defs/ena_admin_defs.h |  45 +++++--
 3 files changed, 135 insertions(+), 52 deletions(-)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index 31c37b0ab3..fb3ad27d0a 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -41,10 +41,12 @@
 #define ENA_MAX_ADMIN_POLL_US 5000
 
 /* PHC definitions */
-#define ENA_PHC_DEFAULT_EXPIRE_TIMEOUT_USEC 20
+#define ENA_PHC_DEFAULT_EXPIRE_TIMEOUT_USEC 10
 #define ENA_PHC_DEFAULT_BLOCK_TIMEOUT_USEC 1000
-#define ENA_PHC_TIMESTAMP_ERROR 0xFFFFFFFFFFFFFFFF
+#define ENA_PHC_MAX_ERROR_BOUND 0xFFFFFFFF
 #define ENA_PHC_REQ_ID_OFFSET 0xDEAD
+#define ENA_PHC_ERROR_FLAGS (ENA_ADMIN_PHC_ERROR_FLAG_TIMESTAMP | \
+			     ENA_ADMIN_PHC_ERROR_FLAG_ERROR_BOUND)
 
 /*****************************************************************************/
 /*****************************************************************************/
@@ -1778,16 +1780,21 @@ int ena_com_phc_config(struct ena_com_dev *ena_dev)
 	struct ena_admin_set_feat_cmd set_feat_cmd;
 	int ret = 0;
 
-	/* Get device PHC default configuration */
-	ret = ena_com_get_feature(ena_dev, &get_feat_resp, ENA_ADMIN_PHC_CONFIG, 0);
+	/* Get default device PHC configuration */
+	ret = ena_com_get_feature(ena_dev,
+				  &get_feat_resp,
+				  ENA_ADMIN_PHC_CONFIG,
+				  ENA_ADMIN_PHC_FEATURE_VERSION_0);
 	if (unlikely(ret)) {
 		ena_trc_err(ena_dev, "Failed to get PHC feature configuration, error: %d\n", ret);
 		return ret;
 	}
 
-	/* Supporting only readless PHC retrieval */
-	if (get_feat_resp.u.phc.type != ENA_ADMIN_PHC_TYPE_READLESS) {
-		ena_trc_err(ena_dev, "Unsupported PHC type, error: %d\n", ENA_COM_UNSUPPORTED);
+	/* Supporting only PHC V0 (readless mode with error bound) */
+	if (get_feat_resp.u.phc.version != ENA_ADMIN_PHC_FEATURE_VERSION_0) {
+		ena_trc_err(ena_dev, "Unsupported PHC version (0x%X), error: %d\n",
+			    get_feat_resp.u.phc.version,
+			    ENA_COM_UNSUPPORTED);
 		return ENA_COM_UNSUPPORTED;
 	}
 
@@ -1804,11 +1811,11 @@ int ena_com_phc_config(struct ena_com_dev *ena_dev)
 				   get_feat_resp.u.phc.block_timeout_usec :
 				   ENA_PHC_DEFAULT_BLOCK_TIMEOUT_USEC;
 
-	/* Sanity check - expire timeout must not be above skip timeout */
+	/* Sanity check - expire timeout must not exceed block timeout */
 	if (phc->expire_timeout_usec > phc->block_timeout_usec)
 		phc->expire_timeout_usec = phc->block_timeout_usec;
 
-	/* Prepare PHC feature command with PHC output address */
+	/* Prepare PHC config feature command */
 	memset(&set_feat_cmd, 0x0, sizeof(set_feat_cmd));
 	set_feat_cmd.aq_common_descriptor.opcode = ENA_ADMIN_SET_FEATURE;
 	set_feat_cmd.feat_common.feature_id = ENA_ADMIN_PHC_CONFIG;
@@ -1840,13 +1847,16 @@ int ena_com_phc_config(struct ena_com_dev *ena_dev)
 void ena_com_phc_destroy(struct ena_com_dev *ena_dev)
 {
 	struct ena_com_phc_info *phc = &ena_dev->phc;
-
-	phc->active = false;
+	unsigned long flags = 0;
 
 	/* In case PHC is not supported by the device, silently exiting */
 	if (!phc->virt_addr)
 		return;
 
+	ENA_SPINLOCK_LOCK(phc->lock, flags);
+	phc->active = false;
+	ENA_SPINLOCK_UNLOCK(phc->lock, flags);
+
 	ENA_MEM_FREE_COHERENT(ena_dev->dmadev,
 			      sizeof(*phc->virt_addr),
 			      phc->virt_addr,
@@ -1857,15 +1867,14 @@ void ena_com_phc_destroy(struct ena_com_dev *ena_dev)
 	ENA_SPINLOCK_DESTROY(phc->lock);
 }
 
-int ena_com_phc_get(struct ena_com_dev *ena_dev, u64 *timestamp)
+int ena_com_phc_get_timestamp(struct ena_com_dev *ena_dev, u64 *timestamp)
 {
 	volatile struct ena_admin_phc_resp *read_resp = ena_dev->phc.virt_addr;
+	const ena_time_high_res_t zero_system_time = ENA_TIME_INIT_HIGH_RES();
 	struct ena_com_phc_info *phc = &ena_dev->phc;
-	ena_time_high_res_t initial_time = ENA_TIME_INIT_HIGH_RES();
-	static ena_time_high_res_t start_time;
-	unsigned long flags = 0;
 	ena_time_high_res_t expire_time;
 	ena_time_high_res_t block_time;
+	unsigned long flags = 0;
 	int ret = ENA_COM_OK;
 
 	if (!phc->active) {
@@ -1876,9 +1885,10 @@ int ena_com_phc_get(struct ena_com_dev *ena_dev, u64 *timestamp)
 	ENA_SPINLOCK_LOCK(phc->lock, flags);
 
 	/* Check if PHC is in blocked state */
-	if (unlikely(ENA_TIME_COMPARE_HIGH_RES(start_time, initial_time))) {
+	if (unlikely(ENA_TIME_COMPARE_HIGH_RES(phc->system_time, zero_system_time))) {
 		/* Check if blocking time expired */
-		block_time = ENA_GET_SYSTEM_TIMEOUT_HIGH_RES(start_time, phc->block_timeout_usec);
+		block_time = ENA_GET_SYSTEM_TIMEOUT_HIGH_RES(phc->system_time,
+							     phc->block_timeout_usec);
 		if (!ENA_TIME_EXPIRE_HIGH_RES(block_time)) {
 			/* PHC is still in blocked state, skip PHC request */
 			phc->stats.phc_skp++;
@@ -1886,22 +1896,23 @@ int ena_com_phc_get(struct ena_com_dev *ena_dev, u64 *timestamp)
 			goto skip;
 		}
 
-		/* PHC is in active state, update statistics according to req_id and timestamp */
+		/* PHC is in active state, update statistics according to req_id and error_flags */
 		if ((READ_ONCE16(read_resp->req_id) != phc->req_id) ||
-				read_resp->timestamp == ENA_PHC_TIMESTAMP_ERROR)
+		    (read_resp->error_flags & ENA_PHC_ERROR_FLAGS)) {
 			/* Device didn't update req_id during blocking time or timestamp is invalid,
 			 * this indicates on a device error
 			 */
 			phc->stats.phc_err++;
-		else
+		} else {
 			/* Device updated req_id during blocking time with valid timestamp */
 			phc->stats.phc_exp++;
+		}
 	}
 
 	/* Setting relative timeouts */
-	start_time = ENA_GET_SYSTEM_TIME_HIGH_RES();
-	block_time = ENA_GET_SYSTEM_TIMEOUT_HIGH_RES(start_time, phc->block_timeout_usec);
-	expire_time = ENA_GET_SYSTEM_TIMEOUT_HIGH_RES(start_time, phc->expire_timeout_usec);
+	phc->system_time = ENA_GET_SYSTEM_TIME_HIGH_RES();
+	block_time = ENA_GET_SYSTEM_TIMEOUT_HIGH_RES(phc->system_time, phc->block_timeout_usec);
+	expire_time = ENA_GET_SYSTEM_TIMEOUT_HIGH_RES(phc->system_time, phc->expire_timeout_usec);
 
 	/* We expect the device to return this req_id once the new PHC timestamp is updated */
 	phc->req_id++;
@@ -1918,35 +1929,45 @@ int ena_com_phc_get(struct ena_com_dev *ena_dev, u64 *timestamp)
 	while (1) {
 		if (unlikely(ENA_TIME_EXPIRE_HIGH_RES(expire_time))) {
 			/* Gave up waiting for updated req_id, PHC enters into blocked state until
-			 * passing blocking time
+			 * passing blocking time, during this time any get PHC timestamp or
+			 * error bound requests will fail with device busy error
 			 */
+			phc->error_bound = ENA_PHC_MAX_ERROR_BOUND;
 			ret = ENA_COM_DEVICE_BUSY;
 			break;
 		}
 
 		/* Check if req_id was updated by the device */
 		if (READ_ONCE16(read_resp->req_id) != phc->req_id) {
-			/* req_id was not updated by the device, check again on next loop */
+			/* req_id was not updated by the device yet, check again on next loop */
 			continue;
 		}
 
-		/* req_id was updated which indicates that PHC timestamp was updated too */
-		*timestamp = read_resp->timestamp;
-
-		/* PHC timestamp validty check */
-		if (unlikely(*timestamp == ENA_PHC_TIMESTAMP_ERROR)) {
-			/* Retrieved invalid PHC timestamp, PHC enters into blocked state until
-			 * passing blocking time
+		/* req_id was updated by the device which indicates that PHC timestamp, error_bound
+		 * and error_flags are updated too, checking errors before retrieving timestamp and
+		 * error_bound values
+		 */
+		if (unlikely(read_resp->error_flags & ENA_PHC_ERROR_FLAGS)) {
+			/* Retrieved timestamp or error bound errors, PHC enters into blocked state
+			 * until passing blocking time, during this time any get PHC timestamp or
+			 * error bound requests will fail with device busy error
 			 */
+			phc->error_bound = ENA_PHC_MAX_ERROR_BOUND;
 			ret = ENA_COM_DEVICE_BUSY;
 			break;
 		}
 
-		/* Retrieved valid PHC timestamp */
+		/* PHC timestamp value is returned to the caller */
+		*timestamp = read_resp->timestamp;
+
+		/* Error bound value is cached for future retrieval by caller */
+		phc->error_bound = read_resp->error_bound;
+
+		/* Update statistic on valid PHC timestamp retrieval */
 		phc->stats.phc_cnt++;
 
 		/* This indicates PHC state is active */
-		start_time = initial_time;
+		phc->system_time = zero_system_time;
 		break;
 	}
 
@@ -1956,6 +1977,24 @@ int ena_com_phc_get(struct ena_com_dev *ena_dev, u64 *timestamp)
 	return ret;
 }
 
+int ena_com_phc_get_error_bound(struct ena_com_dev *ena_dev, u32 *error_bound)
+{
+	struct ena_com_phc_info *phc = &ena_dev->phc;
+	u32 local_error_bound = phc->error_bound;
+
+	if (!phc->active) {
+		ena_trc_err(ena_dev, "PHC feature is not active in the device\n");
+		return ENA_COM_UNSUPPORTED;
+	}
+
+	if (local_error_bound == ENA_PHC_MAX_ERROR_BOUND)
+		return ENA_COM_DEVICE_BUSY;
+
+	*error_bound = local_error_bound;
+
+	return ENA_COM_OK;
+}
+
 int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev)
 {
 	struct ena_com_mmio_read *mmio_read = &ena_dev->mmio_read;
@@ -2453,9 +2492,9 @@ int ena_com_dev_reset(struct ena_com_dev *ena_dev,
 
 	reset_val |= reset_reason_lsb << ENA_REGS_DEV_CTL_RESET_REASON_SHIFT;
 
-	if (ena_com_get_cap(ena_dev, ENA_ADMIN_EXTENDED_RESET_REASONS)) {
+	if (ena_com_get_cap(ena_dev, ENA_ADMIN_EXTENDED_RESET_REASONS))
 		reset_val |= reset_reason_msb << ENA_REGS_DEV_CTL_RESET_REASON_EXT_SHIFT;
-	} else if (reset_reason_msb) {
+	else if (reset_reason_msb) {
 		/* In case the device does not support intended
 		 * extended reset reason fallback to generic
 		 */
diff --git a/drivers/net/ena/hal/ena_com.h b/drivers/net/ena/hal/ena_com.h
index cd054595d7..c62016cc06 100644
--- a/drivers/net/ena/hal/ena_com.h
+++ b/drivers/net/ena/hal/ena_com.h
@@ -274,6 +274,9 @@ struct ena_com_phc_info {
 	/* PHC shared memory - virtual address */
 	struct ena_admin_phc_resp *virt_addr;
 
+	/* System time of last PHC request */
+	ena_time_high_res_t system_time;
+
 	/* Spin lock to ensure a single outstanding PHC read */
 	ena_spinlock_t lock;
 
@@ -293,17 +296,20 @@ struct ena_com_phc_info {
 	 */
 	u32 block_timeout_usec;
 
+	/* PHC shared memory - physical address */
+	dma_addr_t phys_addr;
+
+	/* PHC shared memory handle */
+	ena_mem_handle_t mem_handle;
+
+	/* Cached error bound per timestamp sample */
+	u32 error_bound;
+
 	/* Request id sent to the device */
 	u16 req_id;
 
 	/* True if PHC is active in the device */
 	bool active;
-
-	/* PHC shared memory - memory handle */
-	ena_mem_handle_t mem_handle;
-
-	/* PHC shared memory - physical address */
-	dma_addr_t phys_addr;
 };
 
 struct ena_rss {
@@ -468,12 +474,19 @@ int ena_com_phc_config(struct ena_com_dev *ena_dev);
  */
 void ena_com_phc_destroy(struct ena_com_dev *ena_dev);
 
-/* ena_com_phc_get - Retrieve PHC timestamp
+/* ena_com_phc_get_timestamp - Retrieve PHC timestamp
+ * @ena_dev: ENA communication layer struct
+ * @timestamp: Retrieved PHC timestamp
+ * @return - 0 on success, negative value on failure
+ */
+int ena_com_phc_get_timestamp(struct ena_com_dev *ena_dev, u64 *timestamp);
+
+/* ena_com_phc_get_error_bound - Retrieve cached PHC error bound
  * @ena_dev: ENA communication layer struct
- * @timestamp: Retrieve PHC timestamp
+ * @error_bound: Cached PHC error bound
  * @return - 0 on success, negative value on failure
  */
-int ena_com_phc_get(struct ena_com_dev *ena_dev, u64 *timestamp);
+int ena_com_phc_get_error_bound(struct ena_com_dev *ena_dev, u32 *error_bound);
 
 /* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism
  * @ena_dev: ENA communication layer struct
diff --git a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
index 438e4a1085..ce8a26721e 100644
--- a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
@@ -144,8 +144,14 @@ enum ena_admin_get_stats_scope {
 	ENA_ADMIN_ETH_TRAFFIC                       = 1,
 };
 
-enum ena_admin_get_phc_type {
-	ENA_ADMIN_PHC_TYPE_READLESS                 = 0,
+enum ena_admin_phc_feature_version {
+	/* Readless with error_bound */
+	ENA_ADMIN_PHC_FEATURE_VERSION_0             = 0,
+};
+
+enum ena_admin_phc_error_flags {
+	ENA_ADMIN_PHC_ERROR_FLAG_TIMESTAMP   = BIT(0),
+	ENA_ADMIN_PHC_ERROR_FLAG_ERROR_BOUND = BIT(1),
 };
 
 /* ENA SRD configuration for ENI */
@@ -987,7 +993,8 @@ struct ena_admin_host_info {
 	 * 5 : reserved
 	 * 6 : rx_page_reuse
 	 * 7 : tx_ipv6_csum_offload
-	 * 31:8 : reserved
+	 * 8 : phc
+	 * 31:9 : reserved
 	 */
 	uint32_t driver_supported_features;
 };
@@ -1073,10 +1080,10 @@ struct ena_admin_queue_ext_feature_desc {
 };
 
 struct ena_admin_feature_phc_desc {
-	/* PHC type as defined in enum ena_admin_get_phc_type,
-	 * used only for GET command.
+	/* PHC version as defined in enum ena_admin_phc_feature_version,
+	 * used only for GET command as max supported PHC version by the device.
 	 */
-	uint8_t type;
+	uint8_t version;
 
 	/* Reserved - MBZ */
 	uint8_t reserved1[3];
@@ -1272,13 +1279,23 @@ struct ena_admin_ena_mmio_req_read_less_resp {
 };
 
 struct ena_admin_phc_resp {
+	/* Request Id, received from DB register */
 	uint16_t req_id;
 
 	uint8_t reserved1[6];
 
+	/* PHC timestamp (nsec) */
 	uint64_t timestamp;
 
-	uint8_t reserved2[48];
+	uint8_t reserved2[8];
+
+	/* Timestamp error limit (nsec) */
+	uint32_t error_bound;
+
+	/* Bit field of enum ena_admin_phc_error_flags */
+	uint32_t error_flags;
+
+	uint8_t reserved3[32];
 };
 
 /* aq_common_desc */
@@ -1381,6 +1398,8 @@ struct ena_admin_phc_resp {
 #define ENA_ADMIN_HOST_INFO_RX_PAGE_REUSE_MASK              BIT(6)
 #define ENA_ADMIN_HOST_INFO_TX_IPV6_CSUM_OFFLOAD_SHIFT      7
 #define ENA_ADMIN_HOST_INFO_TX_IPV6_CSUM_OFFLOAD_MASK       BIT(7)
+#define ENA_ADMIN_HOST_INFO_PHC_SHIFT                       8
+#define ENA_ADMIN_HOST_INFO_PHC_MASK                        BIT(8)
 
 /* feature_rss_ind_table */
 #define ENA_ADMIN_FEATURE_RSS_IND_TABLE_ONE_ENTRY_UPDATE_MASK BIT(0)
@@ -1879,6 +1898,18 @@ static inline void set_ena_admin_feature_rss_ind_table_one_entry_update(struct e
 	p->flags |= val & ENA_ADMIN_FEATURE_RSS_IND_TABLE_ONE_ENTRY_UPDATE_MASK;
 }
 
+static inline uint32_t get_ena_admin_host_info_phc(const struct ena_admin_host_info *p)
+{
+	return (p->driver_supported_features &
+		ENA_ADMIN_HOST_INFO_PHC_MASK) >> ENA_ADMIN_HOST_INFO_PHC_SHIFT;
+}
+
+static inline void set_ena_admin_host_info_phc(struct ena_admin_host_info *p, uint32_t val)
+{
+	p->driver_supported_features |= (val << ENA_ADMIN_HOST_INFO_PHC_SHIFT) &
+					 ENA_ADMIN_HOST_INFO_PHC_MASK;
+}
+
 static inline uint8_t get_ena_admin_aenq_common_desc_phase(const struct ena_admin_aenq_common_desc *p)
 {
 	return p->flags & ENA_ADMIN_AENQ_COMMON_DESC_PHASE_MASK;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 17/33] net/ena/hal: restructure interrupt handling
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (15 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 16/33] net/ena/hal: phc feature modifications shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 18/33] net/ena/hal: add unlikely to error checks shaibran
                   ` (15 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

When invoking an admin command, in interrupt mode, if the interrupt
is received after timeout and also after the calling function finished
running, the response will be written into a memory that is no longer
valid.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index fb3ad27d0a..a0c88b1a0e 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -181,6 +181,7 @@ static int ena_com_admin_init_aenq(struct ena_com_dev *ena_dev,
 static void comp_ctxt_release(struct ena_com_admin_queue *queue,
 				     struct ena_comp_ctx *comp_ctx)
 {
+	comp_ctx->user_cqe = NULL;
 	comp_ctx->occupied = false;
 	ATOMIC32_DEC(&queue->outstanding_cmds);
 }
@@ -474,6 +475,9 @@ static void ena_com_handle_single_admin_completion(struct ena_com_admin_queue *a
 		return;
 	}
 
+	if (!comp_ctx->occupied)
+		return;
+
 	comp_ctx->status = ENA_CMD_COMPLETED;
 	comp_ctx->comp_status = cqe->acq_common_descriptor.status;
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 18/33] net/ena/hal: add unlikely to error checks
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (16 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 17/33] net/ena/hal: restructure interrupt handling shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 19/33] net/ena/hal: missing admin interrupt reset reason shaibran
                   ` (14 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

The unlikely mechanism is used to reduce pipe flush,
caused by a wrong branch prediction.
Moreover, it increases readability by wrapping unexpected errors.
This commit adds unlikely to error checks that are unlikely to happen.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c     | 56 +++++++++++++++----------------
 drivers/net/ena/hal/ena_eth_com.c |  2 +-
 2 files changed, 29 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index a0c88b1a0e..d2de5e172d 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -79,7 +79,7 @@ static int ena_com_mem_addr_set(struct ena_com_dev *ena_dev,
 				       struct ena_common_mem_addr *ena_addr,
 				       dma_addr_t addr)
 {
-	if ((addr & GENMASK_ULL(ena_dev->dma_addr_bits - 1, 0)) != addr) {
+	if (unlikely((addr & GENMASK_ULL(ena_dev->dma_addr_bits - 1, 0)) != addr)) {
 		ena_trc_err(ena_dev, "DMA address has more bits than the device supports\n");
 		return ENA_COM_INVAL;
 	}
@@ -99,7 +99,7 @@ static int ena_com_admin_init_sq(struct ena_com_admin_queue *admin_queue)
 	ENA_MEM_ALLOC_COHERENT(admin_queue->q_dmadev, size, sq->entries, sq->dma_addr,
 			       sq->mem_handle);
 
-	if (!sq->entries) {
+	if (unlikely(!sq->entries)) {
 		ena_trc_err(ena_dev, "Memory allocation failed\n");
 		return ENA_COM_NO_MEM;
 	}
@@ -122,7 +122,7 @@ static int ena_com_admin_init_cq(struct ena_com_admin_queue *admin_queue)
 	ENA_MEM_ALLOC_COHERENT(admin_queue->q_dmadev, size, cq->entries, cq->dma_addr,
 			       cq->mem_handle);
 
-	if (!cq->entries)  {
+	if (unlikely(!cq->entries))  {
 		ena_trc_err(ena_dev, "Memory allocation failed\n");
 		return ENA_COM_NO_MEM;
 	}
@@ -147,7 +147,7 @@ static int ena_com_admin_init_aenq(struct ena_com_dev *ena_dev,
 			aenq->dma_addr,
 			aenq->mem_handle);
 
-	if (!aenq->entries) {
+	if (unlikely(!aenq->entries)) {
 		ena_trc_err(ena_dev, "Memory allocation failed\n");
 		return ENA_COM_NO_MEM;
 	}
@@ -233,7 +233,7 @@ static struct ena_comp_ctx *__ena_com_submit_admin_cmd(struct ena_com_admin_queu
 
 	/* In case of queue FULL */
 	cnt = (u16)ATOMIC32_READ(&admin_queue->outstanding_cmds);
-	if (cnt >= admin_queue->q_depth) {
+	if (unlikely(cnt >= admin_queue->q_depth)) {
 		ena_trc_dbg(admin_queue->ena_dev, "Admin queue is full.\n");
 		admin_queue->stats.out_of_space++;
 		return ERR_PTR(ENA_COM_NO_SPACE);
@@ -357,7 +357,7 @@ static int ena_com_init_io_sq(struct ena_com_dev *ena_dev,
 					       io_sq->desc_addr.mem_handle);
 		}
 
-		if (!io_sq->desc_addr.virt_addr) {
+		if (unlikely(!io_sq->desc_addr.virt_addr)) {
 			ena_trc_err(ena_dev, "Memory allocation failed\n");
 			return ENA_COM_NO_MEM;
 		}
@@ -382,7 +382,7 @@ static int ena_com_init_io_sq(struct ena_com_dev *ena_dev,
 		if (!io_sq->bounce_buf_ctrl.base_buffer)
 			io_sq->bounce_buf_ctrl.base_buffer = ENA_MEM_ALLOC(ena_dev->dmadev, size);
 
-		if (!io_sq->bounce_buf_ctrl.base_buffer) {
+		if (unlikely(!io_sq->bounce_buf_ctrl.base_buffer)) {
 			ena_trc_err(ena_dev, "Bounce buffer memory allocation failed\n");
 			return ENA_COM_NO_MEM;
 		}
@@ -447,7 +447,7 @@ static int ena_com_init_io_cq(struct ena_com_dev *ena_dev,
 					       ENA_CDESC_RING_SIZE_ALIGNMENT);
 	}
 
-	if (!io_cq->cdesc_addr.virt_addr) {
+	if (unlikely(!io_cq->cdesc_addr.virt_addr)) {
 		ena_trc_err(ena_dev, "Memory allocation failed\n");
 		return ENA_COM_NO_MEM;
 	}
@@ -577,7 +577,7 @@ static int ena_com_wait_and_process_admin_cq_polling(struct ena_comp_ctx *comp_c
 		if (comp_ctx->status != ENA_CMD_SUBMITTED)
 			break;
 
-		if (ENA_TIME_EXPIRE(timeout)) {
+		if (unlikely(ENA_TIME_EXPIRE(timeout))) {
 			ena_trc_err(admin_queue->ena_dev,
 				    "Wait for completion (polling) timeout\n");
 			/* ENA didn't have any completion */
@@ -776,7 +776,7 @@ static int ena_com_config_llq_info(struct ena_com_dev *ena_dev,
 			llq_default_cfg->llq_ring_entry_size_value;
 
 	rc = ena_com_set_llq(ena_dev);
-	if (rc)
+	if (unlikely(rc))
 		ena_trc_err(ena_dev, "Cannot set LLQ configuration: %d\n", rc);
 
 	return rc;
@@ -882,7 +882,7 @@ static u32 ena_com_reg_bar_read32(struct ena_com_dev *ena_dev, u16 offset)
 		goto err;
 	}
 
-	if (read_resp->reg_off != offset) {
+	if (unlikely(read_resp->reg_off != offset)) {
 		ena_trc_err(ena_dev, "Read failure: wrong offset provided\n");
 		ret = ENA_MMIO_READ_TIMEOUT;
 	} else {
@@ -1006,7 +1006,7 @@ static int wait_for_reset_state(struct ena_com_dev *ena_dev, u32 timeout,
 			exp_state)
 			return 0;
 
-		if (ENA_TIME_EXPIRE(timeout_stamp))
+		if (unlikely(ENA_TIME_EXPIRE(timeout_stamp)))
 			return ENA_COM_TIMER_EXPIRED;
 
 		ena_delay_exponential_backoff_us(exp++, ena_dev->ena_min_poll_delay_us);
@@ -1467,7 +1467,7 @@ int ena_com_get_io_handlers(struct ena_com_dev *ena_dev, u16 qid,
 			    struct ena_com_io_sq **io_sq,
 			    struct ena_com_io_cq **io_cq)
 {
-	if (qid >= ENA_TOTAL_NUM_QUEUES) {
+	if (unlikely(qid >= ENA_TOTAL_NUM_QUEUES)) {
 		ena_trc_err(ena_dev, "Invalid queue number %d but the max is %d\n",
 			    qid, ENA_TOTAL_NUM_QUEUES);
 		return ENA_COM_INVAL;
@@ -1575,7 +1575,7 @@ int ena_com_set_aenq_config(struct ena_com_dev *ena_dev, u32 groups_flag)
 	int ret;
 
 	ret = ena_com_get_feature(ena_dev, &get_resp, ENA_ADMIN_AENQ_CONFIG, 0);
-	if (ret) {
+	if (unlikely(ret)) {
 		ena_trc_info(ena_dev, "Can't get aenq configuration\n");
 		return ret;
 	}
@@ -1622,7 +1622,7 @@ int ena_com_get_dma_width(struct ena_com_dev *ena_dev)
 
 	ena_trc_dbg(ena_dev, "ENA dma width: %d\n", width);
 
-	if ((width < 32) || width > ENA_MAX_PHYS_ADDR_SIZE_BITS) {
+	if (unlikely(width < 32 || width > ENA_MAX_PHYS_ADDR_SIZE_BITS)) {
 		ena_trc_err(ena_dev, "DMA width illegal value: %d\n", width);
 		return ENA_COM_INVAL;
 	}
@@ -2092,15 +2092,15 @@ int ena_com_admin_init(struct ena_com_dev *ena_dev,
 	ENA_SPINLOCK_INIT(admin_queue->q_lock);
 
 	ret = ena_com_init_comp_ctxt(admin_queue);
-	if (ret)
+	if (unlikely(ret))
 		goto error;
 
 	ret = ena_com_admin_init_sq(admin_queue);
-	if (ret)
+	if (unlikely(ret))
 		goto error;
 
 	ret = ena_com_admin_init_cq(admin_queue);
-	if (ret)
+	if (unlikely(ret))
 		goto error;
 
 	admin_queue->sq.db_addr = (u32 __iomem *)((uintptr_t)ena_dev->reg_bar +
@@ -2133,7 +2133,7 @@ int ena_com_admin_init(struct ena_com_dev *ena_dev,
 	ENA_REG_WRITE32(ena_dev->bus, aq_caps, ena_dev->reg_bar + ENA_REGS_AQ_CAPS_OFF);
 	ENA_REG_WRITE32(ena_dev->bus, acq_caps, ena_dev->reg_bar + ENA_REGS_ACQ_CAPS_OFF);
 	ret = ena_com_admin_init_aenq(ena_dev, aenq_handlers);
-	if (ret)
+	if (unlikely(ret))
 		goto error;
 
 	admin_queue->ena_dev = ena_dev;
@@ -2153,7 +2153,7 @@ int ena_com_create_io_queue(struct ena_com_dev *ena_dev,
 	struct ena_com_io_cq *io_cq;
 	int ret;
 
-	if (ctx->qid >= ENA_TOTAL_NUM_QUEUES) {
+	if (unlikely(ctx->qid >= ENA_TOTAL_NUM_QUEUES)) {
 		ena_trc_err(ena_dev, "Qid (%d) is bigger than max num of queues (%d)\n",
 			    ctx->qid, ENA_TOTAL_NUM_QUEUES);
 		return ENA_COM_INVAL;
@@ -2184,18 +2184,18 @@ int ena_com_create_io_queue(struct ena_com_dev *ena_dev,
 			ENA_MIN32(ena_dev->tx_max_header_size, SZ_256);
 
 	ret = ena_com_init_io_sq(ena_dev, ctx, io_sq);
-	if (ret)
+	if (unlikely(ret))
 		goto error;
 	ret = ena_com_init_io_cq(ena_dev, ctx, io_cq);
-	if (ret)
+	if (unlikely(ret))
 		goto error;
 
 	ret = ena_com_create_io_cq(ena_dev, io_cq);
-	if (ret)
+	if (unlikely(ret))
 		goto error;
 
 	ret = ena_com_create_io_sq(ena_dev, io_sq, io_cq->idx);
-	if (ret)
+	if (unlikely(ret))
 		goto destroy_io_cq;
 
 	return 0;
@@ -2212,7 +2212,7 @@ void ena_com_destroy_io_queue(struct ena_com_dev *ena_dev, u16 qid)
 	struct ena_com_io_sq *io_sq;
 	struct ena_com_io_cq *io_cq;
 
-	if (qid >= ENA_TOTAL_NUM_QUEUES) {
+	if (unlikely(qid >= ENA_TOTAL_NUM_QUEUES)) {
 		ena_trc_err(ena_dev, "Qid (%d) is bigger than max num of queues (%d)\n",
 			    qid, ENA_TOTAL_NUM_QUEUES);
 		return;
@@ -2513,7 +2513,7 @@ int ena_com_dev_reset(struct ena_com_dev *ena_dev,
 
 	rc = wait_for_reset_state(ena_dev, timeout,
 				  ENA_REGS_DEV_STS_RESET_IN_PROGRESS_MASK);
-	if (rc != 0) {
+	if (unlikely(rc)) {
 		ena_trc_err(ena_dev, "Reset indication didn't turn on\n");
 		return rc;
 	}
@@ -2521,7 +2521,7 @@ int ena_com_dev_reset(struct ena_com_dev *ena_dev,
 	/* reset done */
 	ENA_REG_WRITE32(ena_dev->bus, 0, ena_dev->reg_bar + ENA_REGS_DEV_CTL_OFF);
 	rc = wait_for_reset_state(ena_dev, timeout, 0);
-	if (rc != 0) {
+	if (unlikely(rc)) {
 		ena_trc_err(ena_dev, "Reset indication didn't turn off\n");
 		return rc;
 	}
@@ -3383,7 +3383,7 @@ int ena_com_config_dev_mode(struct ena_com_dev *ena_dev,
 	}
 
 	rc = ena_com_config_llq_info(ena_dev, llq_features, llq_default_cfg);
-	if (rc)
+	if (unlikely(rc))
 		return rc;
 
 	ena_dev->tx_max_header_size = llq_info->desc_list_entry_size -
diff --git a/drivers/net/ena/hal/ena_eth_com.c b/drivers/net/ena/hal/ena_eth_com.c
index 988fa013a7..b9123f84c3 100644
--- a/drivers/net/ena/hal/ena_eth_com.c
+++ b/drivers/net/ena/hal/ena_eth_com.c
@@ -455,7 +455,7 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
 	/* If the caller doesn't want to send packets */
 	if (unlikely(!num_bufs && !header_len)) {
 		rc = ena_com_close_bounce_buffer(io_sq);
-		if (rc)
+		if (unlikely(rc))
 			ena_trc_err(ena_com_io_sq_to_ena_dev(io_sq),
 				    "Failed to write buffers to LLQ\n");
 		*nb_hw_desc = io_sq->tail - start_tail;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 19/33] net/ena/hal: missing admin interrupt reset reason
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (17 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 18/33] net/ena/hal: add unlikely to error checks shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 20/33] net/ena/hal: check for existing keep alive notification shaibran
                   ` (13 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

There can be cases when we trigger reset if an admin interrupt
is missing.
In order to identify this use-case specifically,
this commit adds a new reset reason.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c                |  2 ++
 drivers/net/ena/hal/ena_com.h                | 12 ++++++++++++
 drivers/net/ena/hal/ena_defs/ena_regs_defs.h |  1 +
 3 files changed, 15 insertions(+)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index d2de5e172d..8e9c112715 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -803,6 +803,7 @@ static int ena_com_wait_and_process_admin_cq_interrupts(struct ena_comp_ctx *com
 		ENA_SPINLOCK_UNLOCK(admin_queue->q_lock, flags);
 
 		if (comp_ctx->status == ENA_CMD_COMPLETED) {
+			admin_queue->is_missing_admin_interrupt = true;
 			ena_trc_err(admin_queue->ena_dev,
 				    "The ena device sent a completion but the driver didn't receive a MSI-X interrupt (cmd %d), autopolling mode is %s\n",
 				    comp_ctx->cmd_opcode, admin_queue->auto_polling ? "ON" : "OFF");
@@ -2138,6 +2139,7 @@ int ena_com_admin_init(struct ena_com_dev *ena_dev,
 
 	admin_queue->ena_dev = ena_dev;
 	admin_queue->running_state = true;
+	admin_queue->is_missing_admin_interrupt = false;
 
 	return 0;
 error:
diff --git a/drivers/net/ena/hal/ena_com.h b/drivers/net/ena/hal/ena_com.h
index c62016cc06..c999cd2381 100644
--- a/drivers/net/ena/hal/ena_com.h
+++ b/drivers/net/ena/hal/ena_com.h
@@ -237,6 +237,8 @@ struct ena_com_admin_queue {
 	 */
 	bool running_state;
 
+	bool is_missing_admin_interrupt;
+
 	/* Count the number of outstanding admin commands */
 	ena_atomic32_t outstanding_cmds;
 
@@ -1089,6 +1091,16 @@ int ena_com_config_dev_mode(struct ena_com_dev *ena_dev,
 			    struct ena_admin_feature_llq_desc *llq_features,
 			    struct ena_llq_configurations *llq_default_config);
 
+/* ena_com_get_missing_admin_interrupt - Return if there is a missing admin interrupt
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return - true if there is a missing admin interrupt or false otherwise
+ */
+static inline bool ena_com_get_missing_admin_interrupt(struct ena_com_dev *ena_dev)
+{
+	return ena_dev->admin_queue.is_missing_admin_interrupt;
+}
+
 /* ena_com_io_sq_to_ena_dev - Extract ena_com_dev using contained field io_sq.
  * @io_sq: IO submit queue struct
  *
diff --git a/drivers/net/ena/hal/ena_defs/ena_regs_defs.h b/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
index a94025dc77..db6a97d675 100644
--- a/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
@@ -24,6 +24,7 @@ enum ena_regs_reset_reason_types {
 	ENA_REGS_RESET_SUSPECTED_POLL_STARVATION    = 15,
 	ENA_REGS_RESET_RX_DESCRIPTOR_MALFORMED	    = 16,
 	ENA_REGS_RESET_TX_DESCRIPTOR_MALFORMED	    = 17,
+	ENA_REGS_RESET_MISSING_ADMIN_INTERRUPT      = 18,
 	ENA_REGS_RESET_LAST,
 };
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 20/33] net/ena/hal: check for existing keep alive notification
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (18 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 19/33] net/ena/hal: missing admin interrupt reset reason shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 21/33] net/ena/hal: modify memory barrier comment shaibran
                   ` (12 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

This commit adds an API to query the aenq on whether
there is a pending keep alive notification.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c | 39 +++++++++++++++++++++++++++++++++++
 drivers/net/ena/hal/ena_com.h | 10 +++++++++
 2 files changed, 49 insertions(+)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index 8e9c112715..f9613f7807 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -2456,6 +2456,45 @@ void ena_com_aenq_intr_handler(struct ena_com_dev *ena_dev, void *data)
 	mmiowb();
 }
 
+bool ena_com_aenq_has_keep_alive(struct ena_com_dev *ena_dev)
+{
+	struct ena_admin_aenq_common_desc *aenq_common;
+	struct ena_com_aenq *aenq = &ena_dev->aenq;
+	struct ena_admin_aenq_entry *aenq_e;
+	u8 phase = aenq->phase;
+	u16 masked_head;
+
+	masked_head = aenq->head & (aenq->q_depth - 1);
+	aenq_e = &aenq->entries[masked_head]; /* Get first entry */
+	aenq_common = &aenq_e->aenq_common_desc;
+
+	/* Go over all the events */
+	while ((READ_ONCE8(aenq_common->flags) &
+		ENA_ADMIN_AENQ_COMMON_DESC_PHASE_MASK) == phase) {
+		/* Make sure the device finished writing the rest of the descriptor
+		 * before reading it.
+		 */
+		dma_rmb();
+
+		if (aenq_common->group == ENA_ADMIN_KEEP_ALIVE)
+			return true;
+
+		/* Get next event entry */
+		masked_head++;
+
+		if (unlikely(masked_head == aenq->q_depth)) {
+			masked_head = 0;
+			phase = !phase;
+		}
+
+		aenq_e = &aenq->entries[masked_head];
+		aenq_common = &aenq_e->aenq_common_desc;
+	}
+
+	return false;
+}
+
+
 int ena_com_dev_reset(struct ena_com_dev *ena_dev,
 		      enum ena_regs_reset_reason_types reset_reason)
 {
diff --git a/drivers/net/ena/hal/ena_com.h b/drivers/net/ena/hal/ena_com.h
index c999cd2381..737747f64b 100644
--- a/drivers/net/ena/hal/ena_com.h
+++ b/drivers/net/ena/hal/ena_com.h
@@ -639,6 +639,16 @@ void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev);
  */
 void ena_com_aenq_intr_handler(struct ena_com_dev *ena_dev, void *data);
 
+/* ena_com_aenq_has_keep_alive - Retrieve if there is a keep alive notification in the aenq
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method goes over the async event notification queue and returns if there
+ * is a keep alive notification.
+ *
+ * @return - true if there is a keep alive notification in the aenq or false otherwise
+ */
+bool ena_com_aenq_has_keep_alive(struct ena_com_dev *ena_dev);
+
 /* ena_com_abort_admin_commands - Abort all the outstanding admin commands.
  * @ena_dev: ENA communication layer struct
  *
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 21/33] net/ena/hal: modify memory barrier comment
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (19 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 20/33] net/ena/hal: check for existing keep alive notification shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 22/33] net/ena/hal: rework Rx ring submission queue shaibran
                   ` (11 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

The dma_rmb() memory barrier guarantees that the device set the
phase bit before continuing to read the rest of the descriptor.
Because the phase bit and the rest of the descriptor are in the same
cache line this ensures coherency of the data from the descriptor.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index f9613f7807..053e095585 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -2412,8 +2412,8 @@ void ena_com_aenq_intr_handler(struct ena_com_dev *ena_dev, void *data)
 	/* Go over all the events */
 	while ((READ_ONCE8(aenq_common->flags) &
 		ENA_ADMIN_AENQ_COMMON_DESC_PHASE_MASK) == phase) {
-		/* Make sure the phase bit (ownership) is as expected before
-		 * reading the rest of the descriptor.
+		/* Make sure the device finished writing the rest of the descriptor
+		 * before reading it.
 		 */
 		dma_rmb();
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 22/33] net/ena/hal: rework Rx ring submission queue
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (20 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 21/33] net/ena/hal: modify memory barrier comment shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 23/33] net/ena/hal: remove operating system type enum shaibran
                   ` (10 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

RX ring submission queue descriptors are always located in host memory
This optimization replaces the generic update tail method with a
tailored method for host memory type descriptors to avoid unnecessary if
statement.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_eth_com.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ena/hal/ena_eth_com.c b/drivers/net/ena/hal/ena_eth_com.c
index b9123f84c3..ebad38d15a 100644
--- a/drivers/net/ena/hal/ena_eth_com.c
+++ b/drivers/net/ena/hal/ena_eth_com.c
@@ -210,11 +210,8 @@ static int ena_com_sq_update_llq_tail(struct ena_com_io_sq *io_sq)
 	return ENA_COM_OK;
 }
 
-static int ena_com_sq_update_tail(struct ena_com_io_sq *io_sq)
+static int ena_com_sq_update_reqular_queue_tail(struct ena_com_io_sq *io_sq)
 {
-	if (io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV)
-		return ena_com_sq_update_llq_tail(io_sq);
-
 	io_sq->tail++;
 
 	/* Switch phase bit in case of wrap around */
@@ -224,6 +221,14 @@ static int ena_com_sq_update_tail(struct ena_com_io_sq *io_sq)
 	return ENA_COM_OK;
 }
 
+static int ena_com_sq_update_tail(struct ena_com_io_sq *io_sq)
+{
+	if (io_sq->mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV)
+		return ena_com_sq_update_llq_tail(io_sq);
+
+	return ena_com_sq_update_reqular_queue_tail(io_sq);
+}
+
 static struct ena_eth_io_rx_cdesc_base *
 	ena_com_rx_cdesc_idx_to_ptr(struct ena_com_io_cq *io_cq, u16 idx)
 {
@@ -662,7 +667,7 @@ int ena_com_add_single_rx_desc(struct ena_com_io_sq *io_sq,
 	desc->buff_addr_hi =
 		((ena_buf->paddr & GENMASK_ULL(io_sq->dma_addr_bits - 1, 32)) >> 32);
 
-	return ena_com_sq_update_tail(io_sq);
+	return ena_com_sq_update_reqular_queue_tail(io_sq);
 }
 
 bool ena_com_cq_empty(struct ena_com_io_cq *io_cq)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 23/33] net/ena/hal: remove operating system type enum
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (21 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 22/33] net/ena/hal: rework Rx ring submission queue shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 24/33] net/ena/hal: handle command abort shaibran
                   ` (9 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

remove all other operating system enumeration as they
are unrelated to DPDK. Use a constant value instead.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_defs/ena_admin_defs.h | 13 +------------
 drivers/net/ena/hal/ena_plat_dpdk.h           |  1 +
 2 files changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
index ce8a26721e..c3910c50cc 100644
--- a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
@@ -933,19 +933,8 @@ struct ena_admin_feature_rss_flow_hash_input {
 	uint16_t enabled_input_sort;
 };
 
-enum ena_admin_os_type {
-	ENA_ADMIN_OS_LINUX                          = 1,
-	ENA_ADMIN_OS_WIN                            = 2,
-	ENA_ADMIN_OS_DPDK                           = 3,
-	ENA_ADMIN_OS_FREEBSD                        = 4,
-	ENA_ADMIN_OS_IPXE                           = 5,
-	ENA_ADMIN_OS_ESXI                           = 6,
-	ENA_ADMIN_OS_MACOS                          = 7,
-	ENA_ADMIN_OS_GROUPS_NUM                     = 7,
-};
-
 struct ena_admin_host_info {
-	/* defined in enum ena_admin_os_type */
+	/* Host OS type defined as ENA_ADMIN_OS_* */
 	uint32_t os_type;
 
 	/* os distribution string format */
diff --git a/drivers/net/ena/hal/ena_plat_dpdk.h b/drivers/net/ena/hal/ena_plat_dpdk.h
index 5f7cbd1ee7..aa8fbb0cd9 100644
--- a/drivers/net/ena/hal/ena_plat_dpdk.h
+++ b/drivers/net/ena/hal/ena_plat_dpdk.h
@@ -341,5 +341,6 @@ static __rte_always_inline int ena_bits_per_u64(uint64_t bitmap)
 	return count;
 }
 
+#define ENA_ADMIN_OS_DPDK 3
 
 #endif /* DPDK_ENA_COM_ENA_PLAT_DPDK_H_ */
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 24/33] net/ena/hal: handle command abort
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (22 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 23/33] net/ena/hal: remove operating system type enum shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 25/33] net/ena/hal: add support for device reset request shaibran
                   ` (8 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Currently admin_queue->stats.aborted_cmd counter is incremented if an
admin command status is ENA_CMD_ABORTED and only if the admin queue is
in polling mode.
This commit fixes handling the case of incrementing
admin_queue->stats.aborted_cmd if the admin queue is in interrupt
mode as well.
Also added a verification that the command status is a valid
completion status which is currently verified only if the admin queue
is in polling mode.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index 053e095585..b98540ba63 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -824,8 +824,19 @@ static int ena_com_wait_and_process_admin_cq_interrupts(struct ena_comp_ctx *com
 			ret = ENA_COM_TIMER_EXPIRED;
 			goto err;
 		}
+	} else if (unlikely(comp_ctx->status == ENA_CMD_ABORTED)) {
+		ena_trc_err(admin_queue->ena_dev, "Command was aborted\n");
+		ENA_SPINLOCK_LOCK(admin_queue->q_lock, flags);
+		admin_queue->stats.aborted_cmd++;
+		ENA_SPINLOCK_UNLOCK(admin_queue->q_lock, flags);
+		ret = ENA_COM_NO_DEVICE;
+		goto err;
 	}
 
+	ENA_WARN(comp_ctx->status != ENA_CMD_COMPLETED,
+		 admin_queue->ena_dev, "Invalid comp status %d\n",
+		 comp_ctx->status);
+
 	ret = ena_com_comp_status_to_errno(admin_queue, comp_ctx->comp_status);
 err:
 	comp_ctxt_release(admin_queue, comp_ctx);
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 25/33] net/ena/hal: add support for device reset request
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (23 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 24/33] net/ena/hal: handle command abort shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 26/33] net/ena: cosmetic changes shaibran
                   ` (7 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Adds support for reset request message from the device to the driver,
over AENQ, which in turn should cause the driver to trigger reset.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_defs/ena_admin_defs.h | 3 ++-
 drivers/net/ena/hal/ena_defs/ena_regs_defs.h  | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
index c3910c50cc..2adce75ed3 100644
--- a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
@@ -1213,7 +1213,8 @@ enum ena_admin_aenq_group {
 	ENA_ADMIN_KEEP_ALIVE                        = 4,
 	ENA_ADMIN_REFRESH_CAPABILITIES              = 5,
 	ENA_ADMIN_CONF_NOTIFICATIONS                = 6,
-	ENA_ADMIN_AENQ_GROUPS_NUM                   = 7,
+	ENA_ADMIN_DEVICE_REQUEST_RESET              = 7,
+	ENA_ADMIN_AENQ_GROUPS_NUM                   = 8,
 };
 
 enum ena_admin_aenq_notification_syndrome {
diff --git a/drivers/net/ena/hal/ena_defs/ena_regs_defs.h b/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
index db6a97d675..dd9b629f10 100644
--- a/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_regs_defs.h
@@ -25,6 +25,7 @@ enum ena_regs_reset_reason_types {
 	ENA_REGS_RESET_RX_DESCRIPTOR_MALFORMED	    = 16,
 	ENA_REGS_RESET_TX_DESCRIPTOR_MALFORMED	    = 17,
 	ENA_REGS_RESET_MISSING_ADMIN_INTERRUPT      = 18,
+	ENA_REGS_RESET_DEVICE_REQUEST               = 19,
 	ENA_REGS_RESET_LAST,
 };
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 26/33] net/ena: cosmetic changes
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (24 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 25/33] net/ena/hal: add support for device reset request shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 27/33] net/ena/hal: modify customer metrics memory management shaibran
                   ` (6 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

This patch makes several changes to improve
the style and readability of the code.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index b98540ba63..2db21e7895 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -1914,15 +1914,14 @@ int ena_com_phc_get_timestamp(struct ena_com_dev *ena_dev, u64 *timestamp)
 
 		/* PHC is in active state, update statistics according to req_id and error_flags */
 		if ((READ_ONCE16(read_resp->req_id) != phc->req_id) ||
-		    (read_resp->error_flags & ENA_PHC_ERROR_FLAGS)) {
+		    (read_resp->error_flags & ENA_PHC_ERROR_FLAGS))
 			/* Device didn't update req_id during blocking time or timestamp is invalid,
 			 * this indicates on a device error
 			 */
 			phc->stats.phc_err++;
-		} else {
+		else
 			/* Device updated req_id during blocking time with valid timestamp */
 			phc->stats.phc_exp++;
-		}
 	}
 
 	/* Setting relative timeouts */
@@ -2431,7 +2430,7 @@ void ena_com_aenq_intr_handler(struct ena_com_dev *ena_dev, void *data)
 		timestamp = (u64)aenq_common->timestamp_low |
 			((u64)aenq_common->timestamp_high << 32);
 
-		ena_trc_dbg(ena_dev, "AENQ! Group[%x] Syndrome[%x] timestamp: [%" ENA_PRIU64 "s]\n",
+		ena_trc_dbg(ena_dev, "AENQ! Group[%x] Syndrome[%x] timestamp: [%" ENA_PRIu64 "s]\n",
 			    aenq_common->group,
 			    aenq_common->syndrome,
 			    timestamp);
@@ -3233,16 +3232,15 @@ int ena_com_allocate_customer_metrics_buffer(struct ena_com_dev *ena_dev)
 {
 	struct ena_customer_metrics *customer_metrics = &ena_dev->customer_metrics;
 
+	customer_metrics->buffer_len = ENA_CUSTOMER_METRICS_BUFFER_SIZE;
 	ENA_MEM_ALLOC_COHERENT(ena_dev->dmadev,
 			       customer_metrics->buffer_len,
 			       customer_metrics->buffer_virt_addr,
 			       customer_metrics->buffer_dma_addr,
 			       customer_metrics->buffer_dma_handle);
-	if (unlikely(customer_metrics->buffer_virt_addr == NULL))
+	if (unlikely(!customer_metrics->buffer_virt_addr))
 		return ENA_COM_NO_MEM;
 
-	customer_metrics->buffer_len = ENA_CUSTOMER_METRICS_BUFFER_SIZE;
-
 	return 0;
 }
 
@@ -3285,7 +3283,6 @@ void ena_com_delete_customer_metrics_buffer(struct ena_com_dev *ena_dev)
 				      customer_metrics->buffer_dma_addr,
 				      customer_metrics->buffer_dma_handle);
 		customer_metrics->buffer_virt_addr = NULL;
-		customer_metrics->buffer_len = 0;
 	}
 }
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 27/33] net/ena/hal: modify customer metrics memory management
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (25 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 26/33] net/ena: cosmetic changes shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 28/33] net/ena/hal: cosmetic changes shaibran
                   ` (5 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

1. Set buffer length to zero in case memory allocation failed
   and after memory is released.
2. The driver checks buffer_virt_addr for customer allocation
   success. In case the allocation fails, buffer_virt_addr
   may not necessarily be NULL.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_com.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ena/hal/ena_com.c b/drivers/net/ena/hal/ena_com.c
index 2db21e7895..24756e5e76 100644
--- a/drivers/net/ena/hal/ena_com.c
+++ b/drivers/net/ena/hal/ena_com.c
@@ -3233,13 +3233,17 @@ int ena_com_allocate_customer_metrics_buffer(struct ena_com_dev *ena_dev)
 	struct ena_customer_metrics *customer_metrics = &ena_dev->customer_metrics;
 
 	customer_metrics->buffer_len = ENA_CUSTOMER_METRICS_BUFFER_SIZE;
+	customer_metrics->buffer_virt_addr = NULL;
+
 	ENA_MEM_ALLOC_COHERENT(ena_dev->dmadev,
 			       customer_metrics->buffer_len,
 			       customer_metrics->buffer_virt_addr,
 			       customer_metrics->buffer_dma_addr,
 			       customer_metrics->buffer_dma_handle);
-	if (unlikely(!customer_metrics->buffer_virt_addr))
+	if (unlikely(!customer_metrics->buffer_virt_addr)) {
+		customer_metrics->buffer_len = 0;
 		return ENA_COM_NO_MEM;
+	}
 
 	return 0;
 }
@@ -3283,6 +3287,7 @@ void ena_com_delete_customer_metrics_buffer(struct ena_com_dev *ena_dev)
 				      customer_metrics->buffer_dma_addr,
 				      customer_metrics->buffer_dma_handle);
 		customer_metrics->buffer_virt_addr = NULL;
+		customer_metrics->buffer_len = 0;
 	}
 }
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 28/33] net/ena/hal: cosmetic changes
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (26 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 27/33] net/ena/hal: modify customer metrics memory management shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 29/33] net/ena: update device-preferred size of rings shaibran
                   ` (4 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

1. modify log prints to use correct format specifier
   for unsigned variables.
2. removed line breaks for lines that do not exceed
   maximal line length.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/hal/ena_eth_com.c   | 22 +++++++++++-----------
 drivers/net/ena/hal/ena_plat_dpdk.h |  5 ++---
 2 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ena/hal/ena_eth_com.c b/drivers/net/ena/hal/ena_eth_com.c
index ebad38d15a..87a2dbfba1 100644
--- a/drivers/net/ena/hal/ena_eth_com.c
+++ b/drivers/net/ena/hal/ena_eth_com.c
@@ -64,7 +64,7 @@ static int ena_com_write_bounce_buffer_to_dev(struct ena_com_io_sq *io_sq,
 
 		io_sq->entries_in_tx_burst_left--;
 		ena_trc_dbg(ena_com_io_sq_to_ena_dev(io_sq),
-			    "Decreasing entries_in_tx_burst_left of queue %d to %d\n",
+			    "Decreasing entries_in_tx_burst_left of queue %u to %u\n",
 			    io_sq->qid, io_sq->entries_in_tx_burst_left);
 	}
 
@@ -259,7 +259,7 @@ static int ena_com_cdesc_rx_pkt_get(struct ena_com_io_cq *io_cq,
 		if (unlikely((status & ENA_ETH_IO_RX_CDESC_BASE_FIRST_MASK) >>
 		    ENA_ETH_IO_RX_CDESC_BASE_FIRST_SHIFT && count != 0)) {
 			ena_trc_err(dev,
-				    "First bit is on in descriptor #%d on q_id: %d, req_id: %u\n",
+				    "First bit is on in descriptor #%u on q_id: %u, req_id: %u\n",
 				    count, io_cq->qid, cdesc->req_id);
 			return ENA_COM_FAULT;
 		}
@@ -268,7 +268,7 @@ static int ena_com_cdesc_rx_pkt_get(struct ena_com_io_cq *io_cq,
 					ENA_ETH_IO_RX_CDESC_BASE_MBZ17_MASK)) &&
 			      ena_com_get_cap(dev, ENA_ADMIN_CDESC_MBZ))) {
 			ena_trc_err(dev,
-				    "Corrupted RX descriptor #%d on q_id: %d, req_id: %u\n",
+				    "Corrupted RX descriptor #%u on q_id: %u, req_id: %u\n",
 				    count, io_cq->qid, cdesc->req_id);
 			return ENA_COM_FAULT;
 		}
@@ -288,7 +288,7 @@ static int ena_com_cdesc_rx_pkt_get(struct ena_com_io_cq *io_cq,
 		io_cq->cur_rx_pkt_cdesc_start_idx = head_masked;
 
 		ena_trc_dbg(ena_com_io_cq_to_ena_dev(io_cq),
-			    "ENA q_id: %d packets were completed. first desc idx %u descs# %d\n",
+			    "ENA q_id: %u packets were completed. first desc idx %u descs# %u\n",
 			    io_cq->qid, *first_cdesc_idx, count);
 	} else {
 		io_cq->cur_rx_pkt_cdesc_count = count;
@@ -394,7 +394,7 @@ static void ena_com_rx_set_flags(struct ena_com_io_cq *io_cq,
 		ENA_ETH_IO_RX_CDESC_BASE_IPV4_FRAG_SHIFT;
 
 	ena_trc_dbg(ena_com_io_cq_to_ena_dev(io_cq),
-		    "l3_proto %d l4_proto %d l3_csum_err %d l4_csum_err %d hash %d frag %d cdesc_status %x\n",
+		    "l3_proto %d l4_proto %d l3_csum_err %d l4_csum_err %d hash %u frag %d cdesc_status %x\n",
 		    ena_rx_ctx->l3_proto,
 		    ena_rx_ctx->l4_proto,
 		    ena_rx_ctx->l3_csum_err,
@@ -434,7 +434,7 @@ int ena_com_prepare_tx(struct ena_com_io_sq *io_sq,
 
 	if (unlikely(header_len > io_sq->tx_max_header_size)) {
 		ena_trc_err(ena_com_io_sq_to_ena_dev(io_sq),
-			    "Header size is too large %d max header: %d\n",
+			    "Header size is too large %u max header: %u\n",
 			    header_len, io_sq->tx_max_header_size);
 		return ENA_COM_INVAL;
 	}
@@ -592,12 +592,12 @@ int ena_com_rx_pkt(struct ena_com_io_cq *io_cq,
 	}
 
 	ena_trc_dbg(ena_com_io_cq_to_ena_dev(io_cq),
-		    "Fetch rx packet: queue %d completed desc: %d\n",
+		    "Fetch rx packet: queue %u completed desc: %u\n",
 		    io_cq->qid, nb_hw_desc);
 
 	if (unlikely(nb_hw_desc > ena_rx_ctx->max_bufs)) {
 		ena_trc_err(ena_com_io_cq_to_ena_dev(io_cq),
-			    "Too many RX cdescs (%d) > MAX(%d)\n",
+			    "Too many RX cdescs (%u) > MAX(%u)\n",
 			    nb_hw_desc, ena_rx_ctx->max_bufs);
 		return ENA_COM_NO_SPACE;
 	}
@@ -622,7 +622,7 @@ int ena_com_rx_pkt(struct ena_com_io_cq *io_cq,
 	io_sq->next_to_comp += nb_hw_desc;
 
 	ena_trc_dbg(ena_com_io_cq_to_ena_dev(io_cq),
-		    "[%s][QID#%d] Updating SQ head to: %d\n", __func__,
+		    "Updating Queue %u, SQ head to: %u\n",
 		    io_sq->qid, io_sq->next_to_comp);
 
 	/* Get rx flags from the last pkt */
@@ -660,8 +660,8 @@ int ena_com_add_single_rx_desc(struct ena_com_io_sq *io_sq,
 	desc->req_id = req_id;
 
 	ena_trc_dbg(ena_com_io_sq_to_ena_dev(io_sq),
-		    "[%s] Adding single RX desc, Queue: %u, req_id: %u\n",
-		    __func__, io_sq->qid, req_id);
+		    "Adding single RX desc, Queue: %u, req_id: %u\n",
+		    io_sq->qid, req_id);
 
 	desc->buff_addr_lo = (u32)ena_buf->paddr;
 	desc->buff_addr_hi =
diff --git a/drivers/net/ena/hal/ena_plat_dpdk.h b/drivers/net/ena/hal/ena_plat_dpdk.h
index aa8fbb0cd9..fc602971d5 100644
--- a/drivers/net/ena/hal/ena_plat_dpdk.h
+++ b/drivers/net/ena/hal/ena_plat_dpdk.h
@@ -40,7 +40,7 @@ typedef uint64_t dma_addr_t;
 #define ETIME ETIMEDOUT
 #endif
 
-#define ENA_PRIU64 PRIu64
+#define ENA_PRIu64 PRIu64
 #define ena_atomic32_t rte_atomic32_t
 #define ena_mem_handle_t const struct rte_memzone *
 
@@ -73,8 +73,7 @@ typedef uint64_t dma_addr_t;
 /* Redefine memcpy with caution: rte_memcpy can be simply aliased to memcpy, so
  * make the redefinition only if it's safe (and beneficial) to do so.
  */
-#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64_MEMCPY) || \
-	defined(RTE_ARCH_ARM_NEON_MEMCPY)
+#if defined(RTE_ARCH_X86) || defined(RTE_ARCH_ARM64_MEMCPY) || defined(RTE_ARCH_ARM_NEON_MEMCPY)
 #undef memcpy
 #define memcpy rte_memcpy
 #endif
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 29/33] net/ena: update device-preferred size of rings
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (27 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 28/33] net/ena/hal: cosmetic changes shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 30/33] net/ena: exhaust interrupt callbacks in device close shaibran
                   ` (3 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Update the device-preferred size of the Tx ring to fall within the
valid range when a large LLQ is enabled. For consistency, align the
device-preferred size of the Rx ring accordingly.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/ena_ethdev.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index 2414f631c8..2a7b7c0cba 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -2595,8 +2595,10 @@ static int ena_infos_get(struct rte_eth_dev *dev,
 	dev_info->tx_desc_lim.nb_mtu_seg_max = RTE_MIN(ENA_PKT_MAX_BUFS,
 					adapter->max_tx_sgl_size);
 
-	dev_info->default_rxportconf.ring_size = ENA_DEFAULT_RING_SIZE;
-	dev_info->default_txportconf.ring_size = ENA_DEFAULT_RING_SIZE;
+	dev_info->default_rxportconf.ring_size = RTE_MIN(ENA_DEFAULT_RING_SIZE,
+							 dev_info->rx_desc_lim.nb_max);
+	dev_info->default_txportconf.ring_size = RTE_MIN(ENA_DEFAULT_RING_SIZE,
+							 dev_info->tx_desc_lim.nb_max);
 
 	dev_info->err_handle_mode = RTE_ETH_ERROR_HANDLE_MODE_PASSIVE;
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 30/33] net/ena: exhaust interrupt callbacks in device close
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (28 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 29/33] net/ena: update device-preferred size of rings shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 31/33] net/ena: support max large llq depth from the device shaibran
                   ` (2 subsequent siblings)
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Change rte_intr_callback_unregister to its synchronous variant to
ensure all active interrupt callbacks are completed before proceeding
with the flow. Relocate the interrupt deregistration to precede the
release of stats memory, thereby preventing the interrupt handler
from accessing memory that has already been freed.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/ena_ethdev.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index 2a7b7c0cba..d73e321d0f 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -871,6 +871,7 @@ static int ena_close(struct rte_eth_dev *dev)
 	struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
 	struct ena_adapter *adapter = dev->data->dev_private;
 	int ret = 0;
+	int rc;
 
 	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
 		return 0;
@@ -879,17 +880,17 @@ static int ena_close(struct rte_eth_dev *dev)
 		ret = ena_stop(dev);
 	adapter->state = ENA_ADAPTER_STATE_CLOSED;
 
+	rte_intr_disable(intr_handle);
+	rc = rte_intr_callback_unregister_sync(intr_handle, ena_interrupt_handler_rte, dev);
+	if (unlikely(rc != 0))
+		PMD_INIT_LOG(ERR, "Failed to unregister interrupt handler\n");
+
 	ena_rx_queue_release_all(dev);
 	ena_tx_queue_release_all(dev);
 
 	rte_free(adapter->drv_stats);
 	adapter->drv_stats = NULL;
 
-	rte_intr_disable(intr_handle);
-	rte_intr_callback_unregister(intr_handle,
-				     ena_interrupt_handler_rte,
-				     dev);
-
 	/*
 	 * MAC is not allocated dynamically. Setting NULL should prevent from
 	 * release of the resource in the rte_eth_dev_release_port().
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 31/33] net/ena: support max large llq depth from the device
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (29 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 30/33] net/ena: exhaust interrupt callbacks in device close shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 32/33] net/ena: control path pure polling mode shaibran
  2024-03-04 12:29 ` [PATCH v2 33/33] net/ena: upgrade driver version to 2.9.0 shaibran
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

Selected AWS instances from later generations enable
large LLQ by default, allowing the transmission of
packets with headers exceeding 96 bytes.

Due to the overall ENA memory BAR size limitation,
large LLQ has the side effect of halving the maximum
number of LLQ entries (from 1024 to 512).

ENA-Express, powered by AWS Scalable Reliable Datagram
(SRD) technology, requires Tx queue with 1024 entries.
Selected AWS instances from upcoming generations will
have double the size of the ENA memory BAR, enabling ENA-Express
to work with a large LLQ of 1024 entries.

The initial default large LLQ size will remain 512.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 doc/guides/rel_notes/release_24_03.rst        |  2 +
 drivers/net/ena/ena_ethdev.c                  | 38 ++++++++++++-------
 drivers/net/ena/hal/ena_defs/ena_admin_defs.h |  4 +-
 3 files changed, 29 insertions(+), 15 deletions(-)

diff --git a/doc/guides/rel_notes/release_24_03.rst b/doc/guides/rel_notes/release_24_03.rst
index 2a22bb07ed..9823616eeb 100644
--- a/doc/guides/rel_notes/release_24_03.rst
+++ b/doc/guides/rel_notes/release_24_03.rst
@@ -107,6 +107,8 @@ New Features
   * Added support for sub-optimal configuration notifications from the device.
   * Restructured fast release of mbufs when RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE optimization is enabled.
   * Replaced `enable_llq` and `large_llq_hdr` devargs with a new devarg `llq_policy`.
+  * Added support for LLQ header size recommendation from the device.
+  * Allowed large LLQ with 1024 entries when the device supports enlarged memory BAR.
 
 * **Updated Atomic Rules' Arkville driver.**
 
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index d73e321d0f..43693ee2ee 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -42,6 +42,8 @@
 
 #define DECIMAL_BASE 10
 
+#define MAX_WIDE_LLQ_DEPTH_UNSUPPORTED 0
+
 /*
  * We should try to keep ENA_CLEANUP_BUF_SIZE lower than
  * RTE_MEMPOOL_CACHE_MAX_SIZE, so we can fit this in mempool local cache.
@@ -1071,7 +1073,7 @@ static int
 ena_calc_io_queue_size(struct ena_calc_queue_size_ctx *ctx,
 		       bool use_large_llq_hdr)
 {
-	struct ena_admin_feature_llq_desc *llq = &ctx->get_feat_ctx->llq;
+	struct ena_admin_feature_llq_desc *dev = &ctx->get_feat_ctx->llq;
 	struct ena_com_dev *ena_dev = ctx->ena_dev;
 	uint32_t max_tx_queue_size;
 	uint32_t max_rx_queue_size;
@@ -1086,7 +1088,7 @@ ena_calc_io_queue_size(struct ena_calc_queue_size_ctx *ctx,
 		if (ena_dev->tx_mem_queue_type ==
 		    ENA_ADMIN_PLACEMENT_POLICY_DEV) {
 			max_tx_queue_size = RTE_MIN(max_tx_queue_size,
-				llq->max_llq_depth);
+				dev->max_llq_depth);
 		} else {
 			max_tx_queue_size = RTE_MIN(max_tx_queue_size,
 				max_queue_ext->max_tx_sq_depth);
@@ -1106,7 +1108,7 @@ ena_calc_io_queue_size(struct ena_calc_queue_size_ctx *ctx,
 		if (ena_dev->tx_mem_queue_type ==
 		    ENA_ADMIN_PLACEMENT_POLICY_DEV) {
 			max_tx_queue_size = RTE_MIN(max_tx_queue_size,
-				llq->max_llq_depth);
+				dev->max_llq_depth);
 		} else {
 			max_tx_queue_size = RTE_MIN(max_tx_queue_size,
 				max_queues->max_sq_depth);
@@ -1122,18 +1124,28 @@ ena_calc_io_queue_size(struct ena_calc_queue_size_ctx *ctx,
 	max_rx_queue_size = rte_align32prevpow2(max_rx_queue_size);
 	max_tx_queue_size = rte_align32prevpow2(max_tx_queue_size);
 
-	if (use_large_llq_hdr) {
-		if ((llq->entry_size_ctrl_supported &
-		     ENA_ADMIN_LIST_ENTRY_SIZE_256B) &&
-		    (ena_dev->tx_mem_queue_type ==
-		     ENA_ADMIN_PLACEMENT_POLICY_DEV)) {
-			max_tx_queue_size /= 2;
-			PMD_INIT_LOG(INFO,
-				"Forcing large headers and decreasing maximum Tx queue size to %d\n",
+	if (ena_dev->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV && use_large_llq_hdr) {
+		/* intersection between driver configuration and device capabilities */
+		if (dev->entry_size_ctrl_supported & ENA_ADMIN_LIST_ENTRY_SIZE_256B) {
+			if (dev->max_wide_llq_depth == MAX_WIDE_LLQ_DEPTH_UNSUPPORTED) {
+				/* Devices that do not support the double-sized ENA memory BAR will
+				 * report max_wide_llq_depth as 0. In such case, driver halves the
+				 * queue depth when working in large llq policy.
+				 */
+				max_tx_queue_size >>= 1;
+				PMD_INIT_LOG(INFO,
+					"large LLQ policy requires limiting Tx queue size to %u entries\n",
 				max_tx_queue_size);
+			} else if (dev->max_wide_llq_depth < max_tx_queue_size) {
+				/* In case the queue depth that the driver calculated exceeds
+				 * the maximal value that the device allows, it will be limited
+				 * to that maximal value
+				 */
+				max_tx_queue_size = dev->max_wide_llq_depth;
+			}
 		} else {
-			PMD_INIT_LOG(ERR,
-				"Forcing large headers failed: LLQ is disabled or device does not support large headers\n");
+			PMD_INIT_LOG(INFO,
+				"Forcing large LLQ headers failed since device lacks this support\n");
 		}
 	}
 
diff --git a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
index 2adce75ed3..cff6451c96 100644
--- a/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
+++ b/drivers/net/ena/hal/ena_defs/ena_admin_defs.h
@@ -696,8 +696,8 @@ struct ena_admin_feature_llq_desc {
 	 */
 	uint8_t entry_size_recommended;
 
-	/* reserved */
-	uint8_t reserved1[2];
+	/* max depth of wide llq, or 0 for N/A */
+	uint16_t max_wide_llq_depth;
 
 	/* accelerated low latency queues requirement. driver needs to
 	 * support those requirements in order to use accelerated llq
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 32/33] net/ena: control path pure polling mode
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (30 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 31/33] net/ena: support max large llq depth from the device shaibran
@ 2024-03-04 12:29 ` shaibran
  2024-03-04 12:29 ` [PATCH v2 33/33] net/ena: upgrade driver version to 2.9.0 shaibran
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

This commit implements a new operation mode that enables purely
polling-based functionality, eliminating the need for interrupts in
the control path. This mode is not activated by default and can be
toggled using the "control_poll_interval" devarg. When operating in
this mode, periodic alarms are used to monitor the control queues.

A non-zero value for this devarg is mandatory for control path
functionality when binding ports to uio_pci_generic kernel module which
lacks interrupt support.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 doc/guides/nics/ena.rst                |  52 +++++++++---
 doc/guides/rel_notes/release_24_03.rst |   2 +
 drivers/net/ena/ena_ethdev.c           | 108 ++++++++++++++++++++-----
 drivers/net/ena/ena_ethdev.h           |   5 ++
 4 files changed, 133 insertions(+), 34 deletions(-)

diff --git a/doc/guides/nics/ena.rst b/doc/guides/nics/ena.rst
index 53c9341859..d2dd4fa4a0 100644
--- a/doc/guides/nics/ena.rst
+++ b/doc/guides/nics/ena.rst
@@ -109,12 +109,16 @@ Runtime Configuration
 
    * **llq_policy** (default 1)
 
-     Controls whether use device recommended header policy or override it.
+     Controls whether use device recommended header policy or override it:
+
      0 - Disable LLQ.
-         **Use with extreme caution as it leads to a huge performance
-         degradation on AWS instances from 6th generation onwards.**
+     **Use with extreme caution as it leads to a huge performance
+     degradation on AWS instances from 6th generation onwards.**
+
      1 - Accept device recommended LLQ policy (Default).
+
      2 - Enforce normal LLQ policy.
+
      3 - Enforce large LLQ policy.
 
    * **miss_txc_to** (default 5)
@@ -126,6 +130,18 @@ Runtime Configuration
      timer service. Setting this parameter to 0 disables this feature. Maximum
      allowed value is 60 seconds.
 
+   * **control_poll_interval** (default 0)
+
+     Enable polling-based functionality of the admin queues, eliminating the
+     need for interrupts in the control-path:
+
+     0 - Disable (Admin queue will work in interrupt mode).
+
+     [1..1000] - Number of milliseconds to wait between periodic inspection of the admin queues.
+
+     **A non-zero value for this devarg is mandatory for control path functionality
+     when binding ports to uio_pci_generic kernel module which lacks interrupt support.**
+
 ENA Configuration Parameters
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
@@ -164,23 +180,23 @@ Prerequisites
 #. Prepare the system as recommended by DPDK suite.  This includes environment
    variables, hugepages configuration, tool-chains and configuration.
 
-#. ENA PMD can operate with ``vfio-pci``(*) or ``igb_uio`` driver.
+#. ENA PMD can operate with ``vfio-pci`` (*), ``igb_uio``, or ``uio_pci_generic`` driver.
 
    (*) ENAv2 hardware supports Low Latency Queue v2 (LLQv2). This feature
    reduces the latency of the packets by pushing the header directly through
    the PCI to the device, before the DMA is even triggered. For proper work
-   kernel PCI driver must support write combining (WC).
+   kernel PCI driver must support write-combining (WC).
    In DPDK ``igb_uio`` it must be enabled by loading module with
    ``wc_activate=1`` flag (example below). However, mainline's vfio-pci
-   driver in kernel doesn't have WC support yet (planed to be added).
+   driver in kernel doesn't have WC support yet (planned to be added).
    If vfio-pci is used user should follow `AWS ENA PMD documentation
    <https://github.com/amzn/amzn-drivers/tree/master/userspace/dpdk/README.md>`_.
 
-#. Insert ``vfio-pci`` or ``igb_uio`` kernel module using the command
-   ``modprobe vfio-pci`` or ``modprobe uio; insmod igb_uio.ko wc_activate=1``
-   respectively.
+#. For ``igb_uio``:
+   Insert ``igb_uio`` kernel module using the command ``modprobe uio; insmod igb_uio.ko wc_activate=1``
 
-#. For ``vfio-pci`` users only:
+#. For ``vfio-pci``:
+   Insert ``vfio-pci`` kernel module using the command ``modprobe vfio-pci``
    Please make sure that ``IOMMU`` is enabled in your system,
    or use ``vfio`` driver in ``noiommu`` mode::
 
@@ -189,7 +205,17 @@ Prerequisites
    To use ``noiommu`` mode, the ``vfio-pci`` must be built with flag
    ``CONFIG_VFIO_NOIOMMU``.
 
-#. Bind the intended ENA device to ``vfio-pci`` or ``igb_uio`` module.
+#. For ``uio_pci_generic``:
+   Insert ``uio_pci_generic`` kernel module using the command ``modprobe uio_pci_generic``.
+   Make sure that the IOMMU is disabled or is in passthrough mode.
+   For example: ``modprobe uio_pci_generic intel_iommu=off``.
+
+   Note that when launching the application, the ``control_poll_interval`` devarg must be used with a non-zero value (1000 is recommended)
+   as ``uio_pci_generic`` lacks interrupt support. The control-path (admin queues) of the ENA require poll-mode
+   to process command completion and asynchronous notification from the device.
+   For example: ``dpdk-app -a "00:06.0,control_path_poll_interval=1000"``.
+
+#. Bind the intended ENA device to ``vfio-pci``, ``igb_uio``, or ``uio_pci_generic`` module.
 
 At this point the system should be ready to run DPDK applications. Once the
 application runs to completion, the ENA can be detached from attached module if
@@ -198,7 +224,7 @@ necessary.
 **Rx interrupts support**
 
 ENA PMD supports Rx interrupts, which can be used to wake up lcores waiting for
-input. Please note that it won't work with ``igb_uio``, so to use this feature,
+input. Please note that it won't work with ``igb_uio`` and ``uio_pci_generic`` so to use this feature,
 the ``vfio-pci`` should be used.
 
 ENA handles admin interrupts and AENQ notifications on separate interrupt.
@@ -209,7 +235,7 @@ will fail.
 **Note about usage on \*.metal instances**
 
 On AWS, the metal instances are supporting IOMMU for both arm64 and x86_64
-hosts.
+hosts. Note that ``uio_pci_generic`` lacks IOMMU support and cannot be used for metal instances.
 
 * x86_64 (e.g. c5.metal, i3.metal):
    IOMMU should be disabled by default. In that situation, the ``igb_uio`` can
diff --git a/doc/guides/rel_notes/release_24_03.rst b/doc/guides/rel_notes/release_24_03.rst
index 9823616eeb..d01236097a 100644
--- a/doc/guides/rel_notes/release_24_03.rst
+++ b/doc/guides/rel_notes/release_24_03.rst
@@ -109,6 +109,8 @@ New Features
   * Replaced `enable_llq` and `large_llq_hdr` devargs with a new devarg `llq_policy`.
   * Added support for LLQ header size recommendation from the device.
   * Allowed large LLQ with 1024 entries when the device supports enlarged memory BAR.
+  * Added `control_poll_interval` devarg that configure control-path to work in poll-mode.
+  * Added support for binding ports to `uio_pci_generic` kernel module.
 
 * **Updated Atomic Rules' Arkville driver.**
 
diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index 43693ee2ee..af1f6d6d05 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -3,6 +3,7 @@
  * All rights reserved.
  */
 
+#include <rte_alarm.h>
 #include <rte_string_fns.h>
 #include <rte_errno.h>
 #include <rte_version.h>
@@ -36,6 +37,8 @@
 
 #define ENA_MIN_RING_DESC	128
 
+#define USEC_PER_MSEC		1000UL
+
 #define BITS_PER_BYTE 8
 
 #define BITS_PER_TYPE(type) (sizeof(type) * BITS_PER_BYTE)
@@ -95,6 +98,14 @@ struct ena_stats {
  * considered as a missing.
  */
 #define ENA_DEVARG_MISS_TXC_TO "miss_txc_to"
+/*
+ * Controls the period of time (in milliseconds) between two consecutive inspections of
+ * the control queues when the driver is in poll mode and not using interrupts.
+ * By default, this value is zero, indicating that the driver will not be in poll mode and will
+ * use interrupts. A non-zero value for this argument is mandatory when using uio_pci_generic
+ * driver.
+ */
+#define ENA_DEVARG_CONTROL_PATH_POLL_INTERVAL "control_path_poll_interval"
 
 /*
  * Each rte_memzone should have unique name.
@@ -271,7 +282,8 @@ static uint64_t ena_get_rx_queue_offloads(struct ena_adapter *adapter);
 static uint64_t ena_get_tx_queue_offloads(struct ena_adapter *adapter);
 static int ena_infos_get(struct rte_eth_dev *dev,
 			 struct rte_eth_dev_info *dev_info);
-static void ena_interrupt_handler_rte(void *cb_arg);
+static void ena_control_path_handler(void *cb_arg);
+static void ena_control_path_poll_handler(void *cb_arg);
 static void ena_timer_wd_callback(struct rte_timer *timer, void *arg);
 static void ena_destroy_device(struct rte_eth_dev *eth_dev);
 static int eth_ena_dev_init(struct rte_eth_dev *eth_dev);
@@ -882,10 +894,14 @@ static int ena_close(struct rte_eth_dev *dev)
 		ret = ena_stop(dev);
 	adapter->state = ENA_ADAPTER_STATE_CLOSED;
 
-	rte_intr_disable(intr_handle);
-	rc = rte_intr_callback_unregister_sync(intr_handle, ena_interrupt_handler_rte, dev);
-	if (unlikely(rc != 0))
-		PMD_INIT_LOG(ERR, "Failed to unregister interrupt handler\n");
+	if (!adapter->control_path_poll_interval) {
+		rte_intr_disable(intr_handle);
+		rc = rte_intr_callback_unregister_sync(intr_handle, ena_control_path_handler, dev);
+		if (unlikely(rc != 0))
+			PMD_INIT_LOG(ERR, "Failed to unregister interrupt handler\n");
+	} else {
+		rte_eal_alarm_cancel(ena_control_path_poll_handler, dev);
+	}
 
 	ena_rx_queue_release_all(dev);
 	ena_tx_queue_release_all(dev);
@@ -1889,15 +1905,33 @@ static int ena_device_init(struct ena_adapter *adapter,
 	return rc;
 }
 
-static void ena_interrupt_handler_rte(void *cb_arg)
+static void ena_control_path_handler(void *cb_arg)
 {
 	struct rte_eth_dev *dev = cb_arg;
 	struct ena_adapter *adapter = dev->data->dev_private;
 	struct ena_com_dev *ena_dev = &adapter->ena_dev;
 
-	ena_com_admin_q_comp_intr_handler(ena_dev);
-	if (likely(adapter->state != ENA_ADAPTER_STATE_CLOSED))
+	if (likely(adapter->state != ENA_ADAPTER_STATE_CLOSED)) {
+		ena_com_admin_q_comp_intr_handler(ena_dev);
 		ena_com_aenq_intr_handler(ena_dev, dev);
+	}
+}
+
+static void ena_control_path_poll_handler(void *cb_arg)
+{
+	struct rte_eth_dev *dev = cb_arg;
+	struct ena_adapter *adapter = dev->data->dev_private;
+	int rc;
+
+	if (likely(adapter->state != ENA_ADAPTER_STATE_CLOSED)) {
+		ena_control_path_handler(cb_arg);
+		rc = rte_eal_alarm_set(adapter->control_path_poll_interval,
+				       ena_control_path_poll_handler, cb_arg);
+		if (unlikely(rc != 0)) {
+			PMD_DRV_LOG(ERR, "Failed to retrigger control path alarm\n");
+			ena_trigger_reset(adapter, ENA_REGS_RESET_GENERIC);
+		}
+	}
 }
 
 static void check_for_missing_keep_alive(struct ena_adapter *adapter)
@@ -2362,20 +2396,28 @@ static int eth_ena_dev_init(struct rte_eth_dev *eth_dev)
 
 	rte_spinlock_init(&adapter->admin_lock);
 
-	rte_intr_callback_register(intr_handle,
-				   ena_interrupt_handler_rte,
-				   eth_dev);
+	if (!adapter->control_path_poll_interval) {
+		/* Control path interrupt mode */
+		rte_intr_callback_register(intr_handle, ena_control_path_handler, eth_dev);
 	rte_intr_enable(intr_handle);
 	ena_com_set_admin_polling_mode(ena_dev, false);
 	ena_com_admin_aenq_enable(ena_dev);
-
+	} else {  /* Control path polling mode */
+		rc = rte_eal_alarm_set(adapter->control_path_poll_interval,
+				       ena_control_path_poll_handler, eth_dev);
+		if (unlikely(rc != 0)) {
+			PMD_DRV_LOG(ERR, "Failed to set control path alarm\n");
+			goto err_control_path_destroy;
+		}
+	}
 	rte_timer_init(&adapter->timer_wd);
 
 	adapters_found++;
 	adapter->state = ENA_ADAPTER_STATE_INIT;
 
 	return 0;
-
+err_control_path_destroy:
+	rte_free(adapter->drv_stats);
 err_rss_destroy:
 	ena_com_rss_destroy(ena_dev);
 err_delete_debug_area:
@@ -3656,9 +3698,9 @@ static int ena_process_uint_devarg(const char *key,
 {
 	struct ena_adapter *adapter = opaque;
 	char *str_end;
-	uint64_t uint_value;
+	uint64_t uint64_value;
 
-	uint_value = strtoull(value, &str_end, DECIMAL_BASE);
+	uint64_value = strtoull(value, &str_end, DECIMAL_BASE);
 	if (value == str_end) {
 		PMD_INIT_LOG(ERR,
 			"Invalid value for key '%s'. Only uint values are accepted.\n",
@@ -3667,12 +3709,12 @@ static int ena_process_uint_devarg(const char *key,
 	}
 
 	if (strcmp(key, ENA_DEVARG_MISS_TXC_TO) == 0) {
-		if (uint_value > ENA_MAX_TX_TIMEOUT_SECONDS) {
+		if (uint64_value > ENA_MAX_TX_TIMEOUT_SECONDS) {
 			PMD_INIT_LOG(ERR,
 				"Tx timeout too high: %" PRIu64 " sec. Maximum allowed: %d sec.\n",
-				uint_value, ENA_MAX_TX_TIMEOUT_SECONDS);
+				uint64_value, ENA_MAX_TX_TIMEOUT_SECONDS);
 			return -EINVAL;
-		} else if (uint_value == 0) {
+		} else if (uint64_value == 0) {
 			PMD_INIT_LOG(INFO,
 				"Check for missing Tx completions has been disabled.\n");
 			adapter->missing_tx_completion_to =
@@ -3680,9 +3722,27 @@ static int ena_process_uint_devarg(const char *key,
 		} else {
 			PMD_INIT_LOG(INFO,
 				"Tx packet completion timeout set to %" PRIu64 " seconds.\n",
-				uint_value);
+				uint64_value);
 			adapter->missing_tx_completion_to =
-				uint_value * rte_get_timer_hz();
+				uint64_value * rte_get_timer_hz();
+		}
+	} else if (strcmp(key, ENA_DEVARG_CONTROL_PATH_POLL_INTERVAL) == 0) {
+		if (uint64_value > ENA_MAX_CONTROL_PATH_POLL_INTERVAL_MSEC) {
+			PMD_INIT_LOG(ERR,
+				"Control path polling interval is too long: %" PRIu64 " msecs. "
+				"Maximum allowed: %d msecs.\n",
+				uint64_value, ENA_MAX_CONTROL_PATH_POLL_INTERVAL_MSEC);
+			return -EINVAL;
+		} else if (uint64_value == 0) {
+			PMD_INIT_LOG(INFO,
+				"Control path polling interval is set to zero. Operating in "
+				"interrupt mode.\n");
+				adapter->control_path_poll_interval = 0;
+		} else {
+			PMD_INIT_LOG(INFO,
+				"Control path polling interval is set to %" PRIu64 " msecs.\n",
+				uint64_value);
+				adapter->control_path_poll_interval = uint64_value * USEC_PER_MSEC;
 		}
 	}
 
@@ -3712,6 +3772,7 @@ static int ena_parse_devargs(struct ena_adapter *adapter, struct rte_devargs *de
 	static const char * const allowed_args[] = {
 		ENA_DEVARG_LLQ_POLICY,
 		ENA_DEVARG_MISS_TXC_TO,
+		ENA_DEVARG_CONTROL_PATH_POLL_INTERVAL,
 		NULL,
 	};
 	struct rte_kvargs *kvlist;
@@ -3734,6 +3795,10 @@ static int ena_parse_devargs(struct ena_adapter *adapter, struct rte_devargs *de
 		ena_process_uint_devarg, adapter);
 	if (rc != 0)
 		goto exit;
+	rc = rte_kvargs_process(kvlist, ENA_DEVARG_CONTROL_PATH_POLL_INTERVAL,
+		ena_process_uint_devarg, adapter);
+	if (rc != 0)
+		goto exit;
 
 exit:
 	rte_kvargs_free(kvlist);
@@ -3954,7 +4019,8 @@ RTE_PMD_REGISTER_PCI_TABLE(net_ena, pci_id_ena_map);
 RTE_PMD_REGISTER_KMOD_DEP(net_ena, "* igb_uio | uio_pci_generic | vfio-pci");
 RTE_PMD_REGISTER_PARAM_STRING(net_ena,
 	ENA_DEVARG_LLQ_POLICY "=<0|1|2|3> "
-	ENA_DEVARG_MISS_TXC_TO "=<uint>");
+	ENA_DEVARG_MISS_TXC_TO "=<uint>"
+	ENA_DEVARG_CONTROL_PATH_POLL_INTERVAL "=<0-1000>");
 RTE_LOG_REGISTER_SUFFIX(ena_logtype_init, init, NOTICE);
 RTE_LOG_REGISTER_SUFFIX(ena_logtype_driver, driver, NOTICE);
 #ifdef RTE_ETHDEV_DEBUG_RX
diff --git a/drivers/net/ena/ena_ethdev.h b/drivers/net/ena/ena_ethdev.h
index 6716f01ba5..85e816ae72 100644
--- a/drivers/net/ena/ena_ethdev.h
+++ b/drivers/net/ena/ena_ethdev.h
@@ -44,6 +44,8 @@
 #define ENA_MONITORED_TX_QUEUES		3
 #define ENA_DEFAULT_MISSING_COMP	256U
 
+#define ENA_MAX_CONTROL_PATH_POLL_INTERVAL_MSEC 1000
+
 /* While processing submitted and completed descriptors (rx and tx path
  * respectively) in a loop it is desired to:
  *  - perform batch submissions while populating submission queue
@@ -346,6 +348,9 @@ struct ena_adapter {
 
 	uint64_t memzone_cnt;
 
+	/* Time (in microseconds) of the control path queues monitoring interval */
+	uint64_t control_path_poll_interval;
+
 	/*
 	 * Helper variables for holding the information about the supported
 	 * metrics.
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

* [PATCH v2 33/33] net/ena: upgrade driver version to 2.9.0
  2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
                   ` (31 preceding siblings ...)
  2024-03-04 12:29 ` [PATCH v2 32/33] net/ena: control path pure polling mode shaibran
@ 2024-03-04 12:29 ` shaibran
  32 siblings, 0 replies; 34+ messages in thread
From: shaibran @ 2024-03-04 12:29 UTC (permalink / raw)
  To: ferruh.yigit; +Cc: dev, Shai Brandes

From: Shai Brandes <shaibran@amazon.com>

upgrade driver version to 2.9.0.

Signed-off-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
---
 drivers/net/ena/ena_ethdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ena/ena_ethdev.c b/drivers/net/ena/ena_ethdev.c
index af1f6d6d05..f47f585611 100644
--- a/drivers/net/ena/ena_ethdev.c
+++ b/drivers/net/ena/ena_ethdev.c
@@ -22,7 +22,7 @@
 #include <ena_eth_io_defs.h>
 
 #define DRV_MODULE_VER_MAJOR	2
-#define DRV_MODULE_VER_MINOR	8
+#define DRV_MODULE_VER_MINOR	9
 #define DRV_MODULE_VER_SUBMINOR	0
 
 #define __MERGE_64B_H_L(h, l) (((uint64_t)h << 32) | l)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 34+ messages in thread

end of thread, other threads:[~2024-03-04 12:34 UTC | newest]

Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-04 12:29 [PATCH v2 00/33] net/ena: v2.9.0 driver release shaibran
2024-03-04 12:29 ` [PATCH v2 01/33] net/ena: rework the metrics multi-process functions shaibran
2024-03-04 12:29 ` [PATCH v2 02/33] net/ena: report new supported link speed capabilities shaibran
2024-03-04 12:29 ` [PATCH v2 03/33] net/ena: update imissed stat with Rx overruns shaibran
2024-03-04 12:29 ` [PATCH v2 04/33] net/ena: sub-optimal configuration notifications support shaibran
2024-03-04 12:29 ` [PATCH v2 05/33] net/ena: fix fast mbuf free shaibran
2024-03-04 12:29 ` [PATCH v2 06/33] net/ena: rename base folder to hal shaibran
2024-03-04 12:29 ` [PATCH v2 07/33] net/ena: restructure the llq policy setting process shaibran
2024-03-04 12:29 ` [PATCH v2 08/33] net/ena/hal: exponential backoff exp limit shaibran
2024-03-04 12:29 ` [PATCH v2 09/33] net/ena/hal: add a new csum offload bit shaibran
2024-03-04 12:29 ` [PATCH v2 10/33] net/ena/hal: added a bus parameter to ena memcpy macro shaibran
2024-03-04 12:29 ` [PATCH v2 11/33] net/ena/hal: optimize Rx ring submission queue shaibran
2024-03-04 12:29 ` [PATCH v2 12/33] net/ena/hal: rename fields in completion descriptors shaibran
2024-03-04 12:29 ` [PATCH v2 13/33] net/ena/hal: use correct read once on u8 field shaibran
2024-03-04 12:29 ` [PATCH v2 14/33] net/ena/hal: add completion descriptor corruption check shaibran
2024-03-04 12:29 ` [PATCH v2 15/33] net/ena/hal: malformed Tx descriptor error reason shaibran
2024-03-04 12:29 ` [PATCH v2 16/33] net/ena/hal: phc feature modifications shaibran
2024-03-04 12:29 ` [PATCH v2 17/33] net/ena/hal: restructure interrupt handling shaibran
2024-03-04 12:29 ` [PATCH v2 18/33] net/ena/hal: add unlikely to error checks shaibran
2024-03-04 12:29 ` [PATCH v2 19/33] net/ena/hal: missing admin interrupt reset reason shaibran
2024-03-04 12:29 ` [PATCH v2 20/33] net/ena/hal: check for existing keep alive notification shaibran
2024-03-04 12:29 ` [PATCH v2 21/33] net/ena/hal: modify memory barrier comment shaibran
2024-03-04 12:29 ` [PATCH v2 22/33] net/ena/hal: rework Rx ring submission queue shaibran
2024-03-04 12:29 ` [PATCH v2 23/33] net/ena/hal: remove operating system type enum shaibran
2024-03-04 12:29 ` [PATCH v2 24/33] net/ena/hal: handle command abort shaibran
2024-03-04 12:29 ` [PATCH v2 25/33] net/ena/hal: add support for device reset request shaibran
2024-03-04 12:29 ` [PATCH v2 26/33] net/ena: cosmetic changes shaibran
2024-03-04 12:29 ` [PATCH v2 27/33] net/ena/hal: modify customer metrics memory management shaibran
2024-03-04 12:29 ` [PATCH v2 28/33] net/ena/hal: cosmetic changes shaibran
2024-03-04 12:29 ` [PATCH v2 29/33] net/ena: update device-preferred size of rings shaibran
2024-03-04 12:29 ` [PATCH v2 30/33] net/ena: exhaust interrupt callbacks in device close shaibran
2024-03-04 12:29 ` [PATCH v2 31/33] net/ena: support max large llq depth from the device shaibran
2024-03-04 12:29 ` [PATCH v2 32/33] net/ena: control path pure polling mode shaibran
2024-03-04 12:29 ` [PATCH v2 33/33] net/ena: upgrade driver version to 2.9.0 shaibran

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).