[PATCH v2 4/6] net/hns3: use parse link mode info function

[Dengdui Huang <huangdengdui@huawei.com>]

This patch use the framework public function to
replace the driver's private function.

Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c | 51 +++++++---------------------------
 1 file changed, 10 insertions(+), 41 deletions(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index ecd3b2ef64..1b380ac75f 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -4810,45 +4810,6 @@ hns3_check_port_speed(struct hns3_hw *hw, uint32_t link_speeds)
 	return 0;
 }
 
-static uint32_t
-hns3_get_link_speed(uint32_t link_speeds)
-{
-	uint32_t speed = RTE_ETH_SPEED_NUM_NONE;
-
-	if (link_speeds & RTE_ETH_LINK_SPEED_10M ||
-	    link_speeds & RTE_ETH_LINK_SPEED_10M_HD)
-		speed = RTE_ETH_SPEED_NUM_10M;
-	if (link_speeds & RTE_ETH_LINK_SPEED_100M ||
-	    link_speeds & RTE_ETH_LINK_SPEED_100M_HD)
-		speed = RTE_ETH_SPEED_NUM_100M;
-	if (link_speeds & RTE_ETH_LINK_SPEED_1G)
-		speed = RTE_ETH_SPEED_NUM_1G;
-	if (link_speeds & RTE_ETH_LINK_SPEED_10G)
-		speed = RTE_ETH_SPEED_NUM_10G;
-	if (link_speeds & RTE_ETH_LINK_SPEED_25G)
-		speed = RTE_ETH_SPEED_NUM_25G;
-	if (link_speeds & RTE_ETH_LINK_SPEED_40G)
-		speed = RTE_ETH_SPEED_NUM_40G;
-	if (link_speeds & RTE_ETH_LINK_SPEED_50G)
-		speed = RTE_ETH_SPEED_NUM_50G;
-	if (link_speeds & RTE_ETH_LINK_SPEED_100G)
-		speed = RTE_ETH_SPEED_NUM_100G;
-	if (link_speeds & RTE_ETH_LINK_SPEED_200G)
-		speed = RTE_ETH_SPEED_NUM_200G;
-
-	return speed;
-}
-
-static uint8_t
-hns3_get_link_duplex(uint32_t link_speeds)
-{
-	if ((link_speeds & RTE_ETH_LINK_SPEED_10M_HD) ||
-	    (link_speeds & RTE_ETH_LINK_SPEED_100M_HD))
-		return RTE_ETH_LINK_HALF_DUPLEX;
-	else
-		return RTE_ETH_LINK_FULL_DUPLEX;
-}
-
 static int
 hns3_set_copper_port_link_speed(struct hns3_hw *hw,
 				struct hns3_set_link_speed_cfg *cfg)
@@ -4980,14 +4941,22 @@ static int
 hns3_apply_link_speed(struct hns3_hw *hw)
 {
 	struct rte_eth_conf *conf = &hw->data->dev_conf;
+	struct rte_eth_link_mode_info mode_info = {0};
 	struct hns3_set_link_speed_cfg cfg;
+	int ret;
 
 	memset(&cfg, 0, sizeof(struct hns3_set_link_speed_cfg));
 	cfg.autoneg = (conf->link_speeds == RTE_ETH_LINK_SPEED_AUTONEG) ?
 			RTE_ETH_LINK_AUTONEG : RTE_ETH_LINK_FIXED;
 	if (cfg.autoneg != RTE_ETH_LINK_AUTONEG) {
-		cfg.speed = hns3_get_link_speed(conf->link_speeds);
-		cfg.duplex = hns3_get_link_duplex(conf->link_speeds);
+		ret = rte_eth_link_mode_parse(conf->link_speeds, &mode_info);
+		if (ret) {
+			hns3_err(hw, "failed to parse link mode, ret = %d", ret);
+			return ret;
+		}
+		cfg.speed = mode_onfo.speed_num;
+		cfg.speed = mode_info.speed_num;
+		cfg.duplex = mode_info.duplex;
 	}
 
 	return hns3_set_port_link_speed(hw, &cfg);
-- 
2.33.0