From: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
To: dev@dpdk.org
Cc: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>,
Ajit Khaparde <ajit.khaparde@broadcom.com>
Subject: [RFC 2/2] testpmd: Add speed lanes to testpmd config and show command
Date: Fri, 22 Mar 2024 15:25:43 -0700 [thread overview]
Message-ID: <20240322222543.23548-3-damodharam.ammepalli@broadcom.com> (raw)
In-Reply-To: <20240322222543.23548-1-damodharam.ammepalli@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 9534 bytes --]
Add speed lanes configuration and display commands support
to testpmd. Also provide display the lanes info show device info.
testpmd>
testpmd> port stop 0
testpmd> port config 0 speed_lanes 4
testpmd> port config 0 speed 200000 duplex full
testpmd> port start 0
testpmd> show port summary 0
Number of available ports: 2
Port MAC Address Name Driver Status Link Lanes
0 14:23:F2:C3:BA:D2 0000:b1:00.0 net_bnxt up 200 Gbps 4
testpmd>
testpmd> show port info 0
********************* Infos for port 0 *********************
MAC address: 14:23:F2:C3:BA:D2
Device name: 0000:b1:00.0
Driver name: net_bnxt
Firmware-version: 228.9.115.0
Connect to socket: 2
memory allocation on the socket: 2
Link status: up
Link speed: 200 Gbps
Lanes: 4
Link duplex: full-duplex
Autoneg status: Off
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
app/test-pmd/cmdline.c | 142 +++++++++++++++++++++++++++++++++++++++++
app/test-pmd/config.c | 13 ++--
2 files changed, 151 insertions(+), 4 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index b7759e38a8..785e5dd4de 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1361,6 +1361,27 @@ struct cmd_config_speed_all {
cmdline_fixed_string_t value2;
};
+static int
+cmd_validate_lanes(portid_t pid, uint32_t *lanes)
+{
+ struct rte_eth_speed_lanes_capa spd_lanes = {0};
+ int ret;
+
+ ret = rte_eth_speed_lanes_get(pid, &spd_lanes);
+ /* if not supported default lanes to 0 */
+ if (ret == -ENOTSUP) {
+ *lanes = 0;
+ return 0;
+ }
+
+ if (*lanes > spd_lanes.max_lanes_cap) {
+ fprintf(stderr, "Invalid lanes %d configuration\n", *lanes);
+ return -1;
+ }
+
+ return 0;
+}
+
static int
parse_and_check_speed_duplex(char *speedstr, char *duplexstr, uint32_t *speed)
{
@@ -1676,6 +1697,125 @@ static cmdline_parse_inst_t cmd_config_loopback_specific = {
},
};
+/* *** configure speed_lanes for all ports *** */
+struct cmd_config_speed_lanes_all {
+ cmdline_fixed_string_t port;
+ cmdline_fixed_string_t keyword;
+ cmdline_fixed_string_t all;
+ cmdline_fixed_string_t item;
+ uint32_t lanes;
+};
+
+static void
+cmd_config_speed_lanes_all_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_config_speed_lanes_all *res = parsed_result;
+ portid_t pid;
+
+ if (!all_ports_stopped()) {
+ fprintf(stderr, "Please stop all ports first\n");
+ return;
+ }
+
+ RTE_ETH_FOREACH_DEV(pid) {
+ if (cmd_validate_lanes(pid, &res->lanes))
+ return;
+ rte_eth_speed_lanes_set(pid, res->lanes);
+ }
+
+ cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
+}
+
+static cmdline_parse_token_string_t cmd_config_speed_lanes_all_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_speed_lanes_all, port, "port");
+static cmdline_parse_token_string_t cmd_config_speed_lanes_all_keyword =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_speed_lanes_all, keyword,
+ "config");
+static cmdline_parse_token_string_t cmd_config_speed_lanes_all_all =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_speed_lanes_all, all, "all");
+static cmdline_parse_token_string_t cmd_config_speed_lanes_all_item =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_speed_lanes_all, item,
+ "speed_lanes");
+static cmdline_parse_token_num_t cmd_config_speed_lanes_all_lanes =
+ TOKEN_NUM_INITIALIZER(struct cmd_config_speed_lanes_all, lanes, RTE_UINT32);
+
+static cmdline_parse_inst_t cmd_config_speed_lanes_all = {
+ .f = cmd_config_speed_lanes_all_parsed,
+ .data = NULL,
+ .help_str = "port config all speed_lanes <value>",
+ .tokens = {
+ (void *)&cmd_config_speed_lanes_all_port,
+ (void *)&cmd_config_speed_lanes_all_keyword,
+ (void *)&cmd_config_speed_lanes_all_all,
+ (void *)&cmd_config_speed_lanes_all_item,
+ (void *)&cmd_config_speed_lanes_all_lanes,
+ NULL,
+ },
+};
+
+/* *** configure speed_lanes for specific port *** */
+struct cmd_config_speed_lanes_specific {
+ cmdline_fixed_string_t port;
+ cmdline_fixed_string_t keyword;
+ uint16_t port_id;
+ cmdline_fixed_string_t item;
+ uint32_t lanes;
+};
+
+static void
+cmd_config_speed_lanes_specific_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_config_speed_lanes_specific *res = parsed_result;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+
+ if (!port_is_stopped(res->port_id)) {
+ fprintf(stderr, "Please stop port %u first\n", res->port_id);
+ return;
+ }
+
+ if (cmd_validate_lanes(res->port_id, &res->lanes))
+ return;
+ rte_eth_speed_lanes_set(res->port_id, res->lanes);
+
+ cmd_reconfig_device_queue(res->port_id, 1, 1);
+}
+
+static cmdline_parse_token_string_t cmd_config_speed_lanes_specific_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_speed_lanes_specific, port,
+ "port");
+static cmdline_parse_token_string_t cmd_config_speed_lanes_specific_keyword =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_speed_lanes_specific, keyword,
+ "config");
+static cmdline_parse_token_num_t cmd_config_speed_lanes_specific_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_config_speed_lanes_specific, port_id,
+ RTE_UINT16);
+static cmdline_parse_token_string_t cmd_config_speed_lanes_specific_item =
+ TOKEN_STRING_INITIALIZER(struct cmd_config_speed_lanes_specific, item,
+ "speed_lanes");
+static cmdline_parse_token_num_t cmd_config_speed_lanes_specific_lanes =
+ TOKEN_NUM_INITIALIZER(struct cmd_config_speed_lanes_specific, lanes,
+ RTE_UINT32);
+
+static cmdline_parse_inst_t cmd_config_speed_lanes_specific = {
+ .f = cmd_config_speed_lanes_specific_parsed,
+ .data = NULL,
+ .help_str = "port config <port_id> speed_lanes <value>",
+ .tokens = {
+ (void *)&cmd_config_speed_lanes_specific_port,
+ (void *)&cmd_config_speed_lanes_specific_keyword,
+ (void *)&cmd_config_speed_lanes_specific_id,
+ (void *)&cmd_config_speed_lanes_specific_item,
+ (void *)&cmd_config_speed_lanes_specific_lanes,
+ NULL,
+ },
+};
+
/* *** configure txq/rxq, txd/rxd *** */
struct cmd_config_rx_tx {
cmdline_fixed_string_t port;
@@ -13381,6 +13521,8 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
(cmdline_parse_inst_t *)&cmd_show_port_cman_config,
(cmdline_parse_inst_t *)&cmd_set_port_cman_config,
(cmdline_parse_inst_t *)&cmd_config_tx_affinity_map,
+ (cmdline_parse_inst_t *)&cmd_config_speed_lanes_all,
+ (cmdline_parse_inst_t *)&cmd_config_speed_lanes_specific,
NULL,
};
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index ba1007ace6..9f846c5e84 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -779,6 +779,7 @@ port_infos_display(portid_t port_id)
struct rte_ether_addr mac_addr;
struct rte_eth_link link;
struct rte_eth_dev_info dev_info;
+ struct rte_eth_speed_lanes_capa spd_lanes = {0};
int vlan_offload;
struct rte_mempool * mp;
static const char *info_border = "*********************";
@@ -828,6 +829,8 @@ port_infos_display(portid_t port_id)
printf("\nLink status: %s\n", (link.link_status) ? ("up") : ("down"));
printf("Link speed: %s\n", rte_eth_link_speed_to_str(link.link_speed));
+ rte_eth_speed_lanes_get(port_id, &spd_lanes);
+ printf("Lanes: %d\n", spd_lanes.active_lanes);
printf("Link duplex: %s\n", (link.link_duplex == RTE_ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex"));
printf("Autoneg status: %s\n", (link.link_autoneg == RTE_ETH_LINK_AUTONEG) ?
@@ -962,8 +965,8 @@ port_summary_header_display(void)
port_number = rte_eth_dev_count_avail();
printf("Number of available ports: %i\n", port_number);
- printf("%-4s %-17s %-12s %-14s %-8s %s\n", "Port", "MAC Address", "Name",
- "Driver", "Status", "Link");
+ printf("%-4s %-17s %-12s %-14s %-8s %-8s %s\n", "Port", "MAC Address", "Name",
+ "Driver", "Status", "Link", "Lanes");
}
void
@@ -972,6 +975,7 @@ port_summary_display(portid_t port_id)
struct rte_ether_addr mac_addr;
struct rte_eth_link link;
struct rte_eth_dev_info dev_info;
+ struct rte_eth_speed_lanes_capa spd_lanes = {0};
char name[RTE_ETH_NAME_MAX_LEN];
int ret;
@@ -993,10 +997,11 @@ port_summary_display(portid_t port_id)
if (ret != 0)
return;
- printf("%-4d " RTE_ETHER_ADDR_PRT_FMT " %-12s %-14s %-8s %s\n",
+ rte_eth_speed_lanes_get(port_id, &spd_lanes);
+ printf("%-4d " RTE_ETHER_ADDR_PRT_FMT " %-12s %-14s %-8s %-8s %d\n",
port_id, RTE_ETHER_ADDR_BYTES(&mac_addr), name,
dev_info.driver_name, (link.link_status) ? ("up") : ("down"),
- rte_eth_link_speed_to_str(link.link_speed));
+ rte_eth_link_speed_to_str(link.link_speed), spd_lanes.active_lanes);
}
void
--
2.39.3
--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4233 bytes --]
prev parent reply other threads:[~2024-03-22 22:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-22 22:25 [RFC 0/2] Add support for link speed lanes Damodharam Ammepalli
2024-03-22 22:25 ` [RFC 1/2] lib/ethdev: Add link_speed lanes support into rte lib Damodharam Ammepalli
2024-03-22 22:25 ` Damodharam Ammepalli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240322222543.23548-3-damodharam.ammepalli@broadcom.com \
--to=damodharam.ammepalli@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=dev@dpdk.org \
--cc=kalesh-anakkur.purayil@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).