From: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
To: dev@dpdk.org
Cc: david.marchand@redhat.com, carlosmn@weg.net,
mingjinx.ye@intel.com, stable@dpdk.org
Subject: [PATCH] net/ice: fix vlan stripping in double VLAN mode
Date: Wed, 27 Mar 2024 18:44:13 +0000 [thread overview]
Message-ID: <20240327184413.3192526-1-vladimir.medvedkin@intel.com> (raw)
The ICE hardware can operate in two modes - single vlan mode
or double vlan mode. Depending on the operating mode the hardware
handles vlan header with single vlan tag differently.
When double vlan enabled, a packet with a single VLAN is treated
as a packet with outer VLAN only. Otherwise, a single VLAN in a
packet is treated as inner VLAN.
This patch fixes the logic of how vlan stripping is programmed.
Bugzilla ID: 1402
Fixes: de5da9d16430 ("net/ice: support double VLAN")
Cc: mingjinx.ye@intel.com
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
---
drivers/net/ice/ice_ethdev.c | 45 +++++++++++++++++++++++++-----------
1 file changed, 32 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 87385d2649..205c5f5f43 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -3826,7 +3826,10 @@ ice_dev_start(struct rte_eth_dev *dev)
ice_set_tx_function(dev);
mask = RTE_ETH_VLAN_STRIP_MASK | RTE_ETH_VLAN_FILTER_MASK |
- RTE_ETH_VLAN_EXTEND_MASK | RTE_ETH_QINQ_STRIP_MASK;
+ RTE_ETH_VLAN_EXTEND_MASK;
+ if (ice_is_dvm_ena(hw))
+ mask |= RTE_ETH_QINQ_STRIP_MASK;
+
ret = ice_vlan_offload_set(dev, mask);
if (ret) {
PMD_INIT_LOG(ERR, "Unable to set VLAN offload");
@@ -4896,19 +4899,35 @@ ice_vlan_offload_set(struct rte_eth_dev *dev, int mask)
ice_vsi_config_vlan_filter(vsi, false);
}
- if (mask & RTE_ETH_VLAN_STRIP_MASK) {
- if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
- ice_vsi_config_vlan_stripping(vsi, true);
- else
- ice_vsi_config_vlan_stripping(vsi, false);
- }
+ struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
+ if (!ice_is_dvm_ena(hw)) {
+ if (mask & RTE_ETH_VLAN_STRIP_MASK) {
+ if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)
+ ice_vsi_config_vlan_stripping(vsi, true);
+ else
+ ice_vsi_config_vlan_stripping(vsi, false);
+ }
- if (mask & RTE_ETH_QINQ_STRIP_MASK) {
- /* Enable or disable outer VLAN stripping */
- if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_QINQ_STRIP)
- ice_vsi_config_outer_vlan_stripping(vsi, true);
- else
- ice_vsi_config_outer_vlan_stripping(vsi, false);
+ if (mask & RTE_ETH_QINQ_STRIP_MASK) {
+ PMD_DRV_LOG(ERR, "Single VLAN mode (SVM) does not support qinq");
+ return -ENOTSUP;
+ }
+ } else {
+ if ((mask & RTE_ETH_VLAN_STRIP_MASK) |
+ (mask & RTE_ETH_QINQ_STRIP_MASK)) {
+ if (rxmode->offloads & (RTE_ETH_RX_OFFLOAD_VLAN_STRIP |
+ RTE_ETH_RX_OFFLOAD_QINQ_STRIP))
+ ice_vsi_config_outer_vlan_stripping(vsi, true);
+ else
+ ice_vsi_config_outer_vlan_stripping(vsi, false);
+ }
+
+ if (mask & RTE_ETH_QINQ_STRIP_MASK) {
+ if (rxmode->offloads & RTE_ETH_RX_OFFLOAD_QINQ_STRIP)
+ ice_vsi_config_vlan_stripping(vsi, true);
+ else
+ ice_vsi_config_vlan_stripping(vsi, false);
+ }
}
return 0;
--
2.34.1
next reply other threads:[~2024-03-27 18:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-27 18:44 Vladimir Medvedkin [this message]
2024-03-28 11:16 ` David Marchand
2024-04-03 14:03 ` RES: " Carlos de Souza Moraes Neto
2024-04-04 10:43 ` Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240327184413.3192526-1-vladimir.medvedkin@intel.com \
--to=vladimir.medvedkin@intel.com \
--cc=carlosmn@weg.net \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=mingjinx.ye@intel.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).