[PATCH 20/24] net/axgbe: replace mii generic macro for c45 with AXGBE

[Venkat Kumar Ande <VenkatKumar.Ande@amd.com>]

The axgbe driver reuses MII_ADDR_C45 for its own purpose. The values
derived with it are never passed to phylib or a linux MDIO bus driver.
In order that MII_ADDR_C45 can be removed, add an AXGBE specific

Signed-off-by: Venkat Kumar Ande <VenkatKumar.Ande@amd.com>
---
 drivers/net/axgbe/axgbe_common.h | 4 ++--
 drivers/net/axgbe/axgbe_dev.c    | 8 ++++----
 drivers/net/axgbe/axgbe_phy.h    | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_common.h b/drivers/net/axgbe/axgbe_common.h
index 51532fb34a..1a43192630 100644
--- a/drivers/net/axgbe/axgbe_common.h
+++ b/drivers/net/axgbe/axgbe_common.h
@@ -1732,14 +1732,14 @@ do {									\
  */
 #define XMDIO_READ(_pdata, _mmd, _reg)					\
 	((_pdata)->hw_if.read_mmd_regs((_pdata), 0,			\
-		MII_ADDR_C45 | ((_mmd) << 16) | ((_reg) & 0xffff)))
+		AXGBE_ADDR_C45 | ((_mmd) << 16) | ((_reg) & 0xffff)))
 
 #define XMDIO_READ_BITS(_pdata, _mmd, _reg, _mask)			\
 	(XMDIO_READ((_pdata), _mmd, _reg) & _mask)
 
 #define XMDIO_WRITE(_pdata, _mmd, _reg, _val)				\
 	((_pdata)->hw_if.write_mmd_regs((_pdata), 0,			\
-		MII_ADDR_C45 | ((_mmd) << 16) | ((_reg) & 0xffff), (_val)))
+		AXGBE_ADDR_C45 | ((_mmd) << 16) | ((_reg) & 0xffff), (_val)))
 
 #define XMDIO_WRITE_BITS(_pdata, _mmd, _reg, _mask, _val)		\
 do {									\
diff --git a/drivers/net/axgbe/axgbe_dev.c b/drivers/net/axgbe/axgbe_dev.c
index fa7324efa7..ebe64295aa 100644
--- a/drivers/net/axgbe/axgbe_dev.c
+++ b/drivers/net/axgbe/axgbe_dev.c
@@ -207,8 +207,8 @@ static int axgbe_read_mmd_regs_v2(struct axgbe_port *pdata,
 	unsigned int mmd_address, index, offset;
 	int mmd_data;
 
-	if (mmd_reg & MII_ADDR_C45)
-		mmd_address = mmd_reg & ~MII_ADDR_C45;
+	if (mmd_reg & AXGBE_ADDR_C45)
+		mmd_address = mmd_reg & ~AXGBE_ADDR_C45;
 	else
 		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
 
@@ -241,8 +241,8 @@ static void axgbe_write_mmd_regs_v2(struct axgbe_port *pdata,
 {
 	unsigned int mmd_address, index, offset;
 
-	if (mmd_reg & MII_ADDR_C45)
-		mmd_address = mmd_reg & ~MII_ADDR_C45;
+	if (mmd_reg & AXGBE_ADDR_C45)
+		mmd_address = mmd_reg & ~AXGBE_ADDR_C45;
 	else
 		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
 
diff --git a/drivers/net/axgbe/axgbe_phy.h b/drivers/net/axgbe/axgbe_phy.h
index 5b844e81cd..eee3afc370 100644
--- a/drivers/net/axgbe/axgbe_phy.h
+++ b/drivers/net/axgbe/axgbe_phy.h
@@ -16,7 +16,7 @@
 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
  * IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips.
  */
-#define MII_ADDR_C45 (1 << 30)
+#define AXGBE_ADDR_C45  (1 << 30)
 
 /* Basic mode status register. */
 #define BMSR_LSTATUS            0x0004  /* Link status */
-- 
2.34.1