* [RFC PATCH 1/1] Initial Implementation For Jumbo Frames Test Suite
2024-05-24 18:06 [RFC PATCH 0/1] Initial Implementation For Jumbo Frames Nicholas Pratte
@ 2024-05-24 18:06 ` Nicholas Pratte
2024-05-24 18:13 ` [RFC PATCH 0/1] Initial Implementation For Jumbo Frames Nicholas Pratte
1 sibling, 0 replies; 4+ messages in thread
From: Nicholas Pratte @ 2024-05-24 18:06 UTC (permalink / raw)
To: paul.szczepanek, jspewock, luca.vizzarro, thomas, juraj.linkes,
bruce.richardson, Honnappa.Nagarahalli, probb, yoan.picchi
Cc: dev, Nicholas Pratte
The following test suite reflects the fundamental outline for how the
jumbo frames test suite may be designed. The test suite consists of five
individual test cases, each of which assesses the behavior of packet
transmissions for both 1518 byte and 9000 byte frames.
The edge cases are ripped from the old DTS framework, and the general
methodology is the same as well. The process, at this point, has been
refactored to operate within the new DTS framework.
Bugzilla ID: 1421
Signed-off-by: Nicholas Pratte <npratte@iol.unh.edu>
---
dts/framework/config/conf_yaml_schema.json | 3 +-
dts/framework/test_suite.py | 8 +
dts/tests/TestSuite_jumboframes.py | 210 +++++++++++++++++++++
3 files changed, 220 insertions(+), 1 deletion(-)
create mode 100644 dts/tests/TestSuite_jumboframes.py
diff --git a/dts/framework/config/conf_yaml_schema.json b/dts/framework/config/conf_yaml_schema.json
index 4731f4511d..6b9d749022 100644
--- a/dts/framework/config/conf_yaml_schema.json
+++ b/dts/framework/config/conf_yaml_schema.json
@@ -187,7 +187,8 @@
"enum": [
"hello_world",
"os_udp",
- "pmd_buffer_scatter"
+ "pmd_buffer_scatter",
+ "jumboframes"
]
},
"test_target": {
diff --git a/dts/framework/test_suite.py b/dts/framework/test_suite.py
index 9c3b516002..c6bf66605e 100644
--- a/dts/framework/test_suite.py
+++ b/dts/framework/test_suite.py
@@ -19,6 +19,7 @@
from scapy.layers.inet import IP # type: ignore[import]
from scapy.layers.l2 import Ether # type: ignore[import]
from scapy.packet import Packet, Padding # type: ignore[import]
+from scapy.packet import Raw
from .exception import TestCaseVerifyError
from .logger import DTSLogger, get_dts_logger
@@ -180,6 +181,8 @@ def send_packet_and_capture(
packet: Packet,
filter_config: PacketFilteringConfig = PacketFilteringConfig(),
duration: float = 1,
+ define_payload: bool = False,
+ payload: str = "D" * 80,
) -> list[Packet]:
"""Send and receive `packet` using the associated TG.
@@ -190,11 +193,16 @@ def send_packet_and_capture(
packet: The packet to send.
filter_config: The filter to use when capturing packets.
duration: Capture traffic for this amount of time after sending `packet`.
+ define_payload: Enabling true adds a payload to packet's layer 2.
+ payload: user may use default payload or set their own.
Returns:
A list of received packets.
"""
packet = self._adjust_addresses(packet)
+ if define_payload:
+ packet = packet / Raw(load=payload)
+
return self.tg_node.send_packet_and_capture(
packet,
self._tg_port_egress,
diff --git a/dts/tests/TestSuite_jumboframes.py b/dts/tests/TestSuite_jumboframes.py
new file mode 100644
index 0000000000..e24edaf4e4
--- /dev/null
+++ b/dts/tests/TestSuite_jumboframes.py
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2023-2024 University of New Hampshire
+"""Jumbo frame consistency and compatibility test suite.
+
+The test suite ensures the consistency of jumbo frames transmission within
+Poll Mode Drivers using a series of individual test cases. If a Poll Mode
+Driver receives a packet that is greater than its assigned MTU length, then
+that packet will be dropped, and thus not received. Likewise, if a Poll Mode Driver
+receives a packet that is less than or equal to a its designated MTU length, then the
+packet should be tranmitted by the Poll Mode Driver, completeing a cycle within the
+testbed and getting received by the traffic generator. Thus, the following test suite
+evaulates the behavior within all possible edge cases, ensuring that a test Poll
+Mode Driver strictly abides by the above implications.
+"""
+
+from framework.test_suite import TestSuite
+from framework.remote_session.testpmd_shell import TestPmdShell
+
+from scapy.layers.inet import IP # type: ignore[import]
+from scapy.layers.l2 import Ether # type: ignore[import]
+from scapy.packet import Raw # type: ignore[import]
+
+ETHER_HEADER_LEN = 18
+IP_HEADER_LEN = 20
+ETHER_STANDARD_MTU = 1518
+ETHER_JUMBO_FRAME_MTU = 9000
+
+
+class TestJumboframes(TestSuite):
+ """DPDK PMD jumbo frames test suite.
+
+ Asserts the expected behavior of frames greater than, less then, or equal to
+ a designated MTU size in the testpmd application. If a packet size greater
+ than the designated testpmd MTU length is retrieved, the test fails. If a
+ packet size less than or equal to the designated testpmd MTU length is retrieved,
+ the test passes.
+ """
+
+ def set_up_suite(self) -> None:
+ """Set up the test suite.
+
+ Setup:
+ Set traffic generator MTU lengths to a size greater than scope of all
+ test cases.
+ """
+ self.tg_node.main_session.configure_port_mtu(
+ ETHER_JUMBO_FRAME_MTU + 200, self._tg_port_egress
+ )
+ self.tg_node.main_session.configure_port_mtu(
+ ETHER_JUMBO_FRAME_MTU + 200, self._tg_port_ingress
+ )
+
+ def send_packet_and_verify(self, pktsize: int, should_receive: bool = True) -> None:
+ """Generate, send, and capture packets to verify that the sent packet was received or not.
+
+ Generates a packet based on a specified size and sends it to the SUT. The desired packet's
+ payload size is calculated, and arbitrary, byte-sized characters are inserted into the
+ packet before sending. Packets are captured, and depending on the test case, packet
+ payloads are checked to determine if the sent payload was received.
+
+ Args:
+ pktsize: Size of packet to be generated and sent.
+ should_receive: Indicate whether the test case expects to receive the packet or not.
+ """
+ pktlength = pktsize - ETHER_HEADER_LEN
+ padding = pktlength - IP_HEADER_LEN
+
+ packet = Ether() / IP(len=pktlength) / Raw(load="\x50" * padding)
+ received_packets = self.send_packet_and_capture(packet)
+
+ found = any(
+ ("\x50" * padding) in str(packets.load)
+ for packets in received_packets
+ if hasattr(packets, "load")
+ )
+
+ print(found)
+ if should_receive:
+ self.verify(found, "Packet pass assert error")
+ else:
+ self.verify(not found, "Packet drop assert error")
+
+ def test_jumboframes_normal_nojumbo(self) -> None:
+ """Assess the boundaries of packets sent less than or equal to the standard MTU length.
+
+ PMDs are set to the standard MTU length of 1518 to assess behavior of sent packets less than
+ or equal to this size. Sends two packets: one that is less than 1518 bytes, and another that
+ is equal to 1518 bytes. The test case expects to receive both packets.
+
+ Test:
+ Start testpmd and send packets of sizes 1517 and 1518.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_STANDARD_MTU) + "--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_STANDARD_MTU - 1)
+ self.send_packet_and_verify(ETHER_STANDARD_MTU)
+ testpmd.close()
+
+ def test_jumboframes_jumbo_nojumbo(self) -> None:
+ """Assess the boundaries of packets sent greater than standard MTU length.
+
+ PMDs are set to the standard MTU length of 1518 bytes to assess behavior of sent packets
+ greater than this size. Sends one packet with a frame size of 1519. The test cases does
+ not expect to receive this packet.
+
+ Test:
+ Start testpmd with standard MTU size of 1518. Send a packet of 1519 and verify it was
+ not received.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_STANDARD_MTU) + "--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_STANDARD_MTU + 1, False)
+ testpmd.close()
+
+ def test_jumboframes_normal_jumbo(self) -> None:
+ """Assess the consistency of standard 1518 byte packets using a 9000 byte jumbo MTU length.
+
+ PMDs are set to a jumbo frame size of 9000 bytes. Packets of sizes 1517 and 1518 are sent
+ to assess the boundaries of packets less than or equal to the standard MTU length of 1518.
+ The test case expects to receive both packets.
+
+ Test:
+ Start testpmd with a jumbo frame size of 9000 bytes. Send a packet of 1517 and 1518
+ and verify they were received.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_JUMBO_FRAME_MTU) + "--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_STANDARD_MTU - 1)
+ self.send_packet_and_verify(ETHER_STANDARD_MTU)
+ testpmd.close()
+
+ def test_jumboframes_jumbo_jumbo(self) -> None:
+ """Assess the boundaries packets sent at an MTU size of 9000 bytes.
+
+ PMDs are set to a jumbo frames size of 9000 bytes. Packets of size 1519, 8999, and 9000
+ are sent. The test expects to receive all packets.
+
+ Test:
+ Start testpmd with an MTU length of 9000 bytes. Send packets of size 1519, 8999,
+ and 9000 and verify that all packets were received.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_JUMBO_FRAME_MTU) + "--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_STANDARD_MTU + 1)
+ self.send_packet_and_verify(ETHER_JUMBO_FRAME_MTU - 1)
+ self.send_packet_and_verify(ETHER_JUMBO_FRAME_MTU)
+ testpmd.close()
+
+ def test_jumboframes_bigger_jumbo(self) -> None:
+ """Assess the behavior of packets send greater than a specified MTU length of 9000 bytes.
+
+ PMDs are set to a jumbo frames size of 9000 bytes. A packet of size 9001 is sent to the SUT.
+ The test case does not expect to receive the packet.
+
+ Test:
+ Start testpmd with an MTU length of 9000 bytes. Send a packet of 9001 bytes and verify
+ it was not received.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--max-pkt-len=%s " % (ETHER_JUMBO_FRAME_MTU) + "--port-topology=paired "
+ "--tx-offloads=0x8000 "
+ ),
+ privileged=True,
+ )
+ testpmd.start()
+ self.send_packet_and_verify(ETHER_JUMBO_FRAME_MTU + 1, False)
+ testpmd.close()
+
+ def tear_down_suite(self) -> None:
+ """Tear down the test suite.
+
+ Teardown:
+ Set the MTU size of the traffic generator back to the standard 1518 byte size.
+ """
+ self.tg_node.main_session.configure_port_mtu(
+ ETHER_STANDARD_MTU - ETHER_HEADER_LEN, self._tg_port_egress
+ )
+ self.tg_node.main_session.configure_port_mtu(
+ ETHER_STANDARD_MTU - ETHER_HEADER_LEN, self._tg_port_ingress
+ )
--
2.44.0
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [RFC PATCH 0/1] Initial Implementation For Jumbo Frames
2024-05-24 18:06 [RFC PATCH 0/1] Initial Implementation For Jumbo Frames Nicholas Pratte
2024-05-24 18:06 ` [RFC PATCH 1/1] Initial Implementation For Jumbo Frames Test Suite Nicholas Pratte
@ 2024-05-24 18:13 ` Nicholas Pratte
1 sibling, 0 replies; 4+ messages in thread
From: Nicholas Pratte @ 2024-05-24 18:13 UTC (permalink / raw)
To: paul.szczepanek, jspewock, luca.vizzarro, thomas, juraj.linkes,
bruce.richardson, Honnappa.Nagarahalli, probb, yoan.picchi
Cc: dev
This is being superseded, ignore this submission.
Thanks.
On Fri, May 24, 2024 at 2:07 PM Nicholas Pratte <npratte@iol.unh.edu> wrote:
>
> The following is a rough design for the implementation of the jumbo
> frames test suite in new DTS. The test suite uses the same
> testing methodology from the test suite implementation in old
> DTS. In doing so, much of the logic in this implementation has been
> stripped away for the sake of maintaining an OS-agnostic design
> philosopgy. Thus, there are some concerns here that need further
> discussion.
>
> All test cases behave accordingly on lab hardware. However, issues with
> the testpmd shell, all of which will be fixed with the upcoming context
> manager, prevent the test suite from functioning properly if all test
> cases are run sequentially. Thus, for testing, each test case needs to
> be run individually. So, expect issues if attempting to test.
>
> Old DTS implements some basic logic that detects 1GB NICs, specifically
> when testing jumbo frame packets greater than the specified MTU length.
> This is because, according to a commit message from 2016, 1GB NICs will
> automatically adjust their size to +4 bytes, meaning that when setting
> an MTU of 9000, testpmd adjust the MTU size to 9004. To compensate, some
> logic was inserted in the old suite to adjust packet sizes accordingly.
> Given that Juraj's capabilities patch is in development, it would be
> possible to set a restriction on this test suite to remove the support
> of 1GB NICs, which could be determined from testpmd outputs; it could
> also be possible that this problem is entirely null and void today,
> essentially allowing us to forget about it.
>
> The current implementation is not developed with both the capabilities
> patch and the params patch in mind; however, the current design can and
> will be refactored to do so.
>
> Nicholas Pratte (1):
> Initial Implementation For Jumbo Frames Test Suite
>
> dts/framework/config/conf_yaml_schema.json | 3 +-
> dts/framework/test_suite.py | 8 +
> dts/tests/TestSuite_jumboframes.py | 210 +++++++++++++++++++++
> 3 files changed, 220 insertions(+), 1 deletion(-)
> create mode 100644 dts/tests/TestSuite_jumboframes.py
>
> --
> 2.44.0
>
^ permalink raw reply [flat|nested] 4+ messages in thread