From: Venkat Kumar Ande <venkatkumar.ande@amd.com>
To: <dev@dpdk.org>
Cc: <Selwin.Sebastian@amd.com>,
Venkat Kumar Ande <VenkatKumar.Ande@amd.com>,
Selwin Sebastian <selwin.sebastian@amd.com>
Subject: [PATCH v3 22/25] net/axgbe: add 2.5GbE support to 10G BaseT mode
Date: Tue, 4 Jun 2024 17:41:54 +0530 [thread overview]
Message-ID: <20240604121157.3052-22-venkatkumar.ande@amd.com> (raw)
In-Reply-To: <20240604121157.3052-1-venkatkumar.ande@amd.com>
From: Venkat Kumar Ande <VenkatKumar.Ande@amd.com>
Add support to the driver to fully recognize and enable 2.5GbE speed in
10GBaseT mode.
Signed-off-by: Venkat Kumar Ande <VenkatKumar.Ande@amd.com>
Acked-by: Selwin Sebastian <selwin.sebastian@amd.com>
---
drivers/net/axgbe/axgbe_phy_impl.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index 1f45e955c4..140c9f609b 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -1392,9 +1392,11 @@ static enum axgbe_mode axgbe_phy_switch_baset_mode(struct axgbe_port *pdata)
case AXGBE_MODE_SGMII_100:
case AXGBE_MODE_SGMII_1000:
return AXGBE_MODE_KR;
+ case AXGBE_MODE_KX_2500:
+ return AXGBE_MODE_SGMII_1000;
case AXGBE_MODE_KR:
default:
- return AXGBE_MODE_SGMII_1000;
+ return AXGBE_MODE_KX_2500;
}
}
@@ -1883,6 +1885,7 @@ static bool axgbe_phy_port_mode_mismatch(struct axgbe_port *pdata)
if ((phy_data->port_speeds & AXGBE_PHY_PORT_SPEED_10) ||
(phy_data->port_speeds & AXGBE_PHY_PORT_SPEED_100) ||
(phy_data->port_speeds & AXGBE_PHY_PORT_SPEED_1000) ||
+ (phy_data->port_speeds & AXGBE_PHY_PORT_SPEED_2500) ||
(phy_data->port_speeds & AXGBE_PHY_PORT_SPEED_10000))
return false;
break;
@@ -2270,6 +2273,10 @@ static int axgbe_phy_init(struct axgbe_port *pdata)
pdata->phy.supported |= SUPPORTED_1000baseT_Full;
phy_data->start_mode = AXGBE_MODE_SGMII_1000;
}
+ if (phy_data->port_speeds & AXGBE_PHY_PORT_SPEED_2500) {
+ pdata->phy.supported |= SUPPORTED_2500baseX_Full;
+ phy_data->start_mode = AXGBE_MODE_KX_2500;
+ }
if (phy_data->port_speeds & AXGBE_PHY_PORT_SPEED_10000) {
pdata->phy.supported |= SUPPORTED_10000baseT_Full;
phy_data->start_mode = AXGBE_MODE_KR;
--
2.34.1
next prev parent reply other threads:[~2024-06-04 12:15 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240507124305.2318-1-VenkatKumar.Ande@amd.com>
2024-06-04 12:11 ` [PATCH v3 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 02/25] net/axgbe: reset link when the link never comes back Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 03/25] net/axgbe: fix fluctuations for 1G BELFUSE SFP Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 04/25] net/axgbe: update DMA coherency values Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 05/25] net/axgbe: disable interrupts during device removal Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 06/25] net/axgbe: yellow carp devices do not need rrc Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 07/25] net/axgbe: enable PLL control for fixed PHY modes only Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 08/25] net/axgbe: fix the SFP codes check for DAC cables Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 09/25] net/axgbe: fix logic around active and passive cables Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 10/25] net/axgbe: check only the minimum speed for cables Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 11/25] net/axgbe: flow Tx Ctrl Registers are h/w version dependent Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 12/25] net/axgbe: delay AN timeout during KR training Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 13/25] net/axgbe: fix the false linkup in axgbe PHY status Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 14/25] net/axgbe: remove use of comm owned field Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 15/25] net/axgbe: remove field of SFP diagnostic support Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 16/25] net/axgbe: improve SFP 100Mbps auto-negotiation Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 17/25] net/axgbe: remove unnecessary conversion to bool Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 18/25] net/axgbe: use definitions for mailbox commands Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 19/25] net/axgbe: add support for 10 Mbps speed Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 20/25] net/axgbe: separate C22 and C45 transactions Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 21/25] net/axgbe: replace mii generic macro for c45 with AXGBE Venkat Kumar Ande
2024-06-04 12:11 ` Venkat Kumar Ande [this message]
2024-06-04 12:11 ` [PATCH v3 23/25] net/axgbe: add support for Rx adaptation Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 24/25] net/axgbe: extend 10Mbps support to MAC version 21H Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 25/25] net/axgbe: modify debug messages Venkat Kumar Ande
2024-06-05 17:07 ` [PATCH v3 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240604121157.3052-22-venkatkumar.ande@amd.com \
--to=venkatkumar.ande@amd.com \
--cc=Selwin.Sebastian@amd.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).