From: Venkat Kumar Ande <venkatkumar.ande@amd.com>
To: <dev@dpdk.org>
Cc: <Selwin.Sebastian@amd.com>,
Venkat Kumar Ande <VenkatKumar.Ande@amd.com>, <stable@dpdk.org>,
Selwin Sebastian <selwin.sebastian@amd.com>
Subject: [PATCH v3 05/25] net/axgbe: disable interrupts during device removal
Date: Tue, 4 Jun 2024 17:41:37 +0530 [thread overview]
Message-ID: <20240604121157.3052-5-venkatkumar.ande@amd.com> (raw)
In-Reply-To: <20240604121157.3052-1-venkatkumar.ande@amd.com>
From: Venkat Kumar Ande <VenkatKumar.Ande@amd.com>
Hardware interrupts are enabled during the init, however,
they are not disabled during close.
Disable all hardware interrupts during close operation to avoid any
issues.
Fixes: 9e890103267e ("net/axgbe: add Rx/Tx setup")
Cc: stable@dpdk.org
Signed-off-by: Venkat Kumar Ande <VenkatKumar.Ande@amd.com>
Acked-by: Selwin Sebastian <selwin.sebastian@amd.com>
---
drivers/net/axgbe/axgbe_ethdev.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index dd681f15a0..e5d8f7db02 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -2411,12 +2411,14 @@ static int
axgbe_dev_close(struct rte_eth_dev *eth_dev)
{
struct rte_pci_device *pci_dev;
+ struct axgbe_port *pdata;
PMD_INIT_FUNC_TRACE();
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
+ pdata = eth_dev->data->dev_private;
pci_dev = RTE_DEV_TO_PCI(eth_dev->device);
axgbe_dev_clear_queues(eth_dev);
@@ -2426,6 +2428,9 @@ axgbe_dev_close(struct rte_eth_dev *eth_dev)
axgbe_dev_interrupt_handler,
(void *)eth_dev);
+ /* Disable all interrupts in the hardware */
+ XP_IOWRITE(pdata, XP_INT_EN, 0x0);
+
return 0;
}
--
2.34.1
next prev parent reply other threads:[~2024-06-04 12:12 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240507124305.2318-1-VenkatKumar.Ande@amd.com>
2024-06-04 12:11 ` [PATCH v3 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 02/25] net/axgbe: reset link when the link never comes back Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 03/25] net/axgbe: fix fluctuations for 1G BELFUSE SFP Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 04/25] net/axgbe: update DMA coherency values Venkat Kumar Ande
2024-06-04 12:11 ` Venkat Kumar Ande [this message]
2024-06-04 12:11 ` [PATCH v3 06/25] net/axgbe: yellow carp devices do not need rrc Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 07/25] net/axgbe: enable PLL control for fixed PHY modes only Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 08/25] net/axgbe: fix the SFP codes check for DAC cables Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 09/25] net/axgbe: fix logic around active and passive cables Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 10/25] net/axgbe: check only the minimum speed for cables Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 11/25] net/axgbe: flow Tx Ctrl Registers are h/w version dependent Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 12/25] net/axgbe: delay AN timeout during KR training Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 13/25] net/axgbe: fix the false linkup in axgbe PHY status Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 14/25] net/axgbe: remove use of comm owned field Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 15/25] net/axgbe: remove field of SFP diagnostic support Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 16/25] net/axgbe: improve SFP 100Mbps auto-negotiation Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 17/25] net/axgbe: remove unnecessary conversion to bool Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 18/25] net/axgbe: use definitions for mailbox commands Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 19/25] net/axgbe: add support for 10 Mbps speed Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 20/25] net/axgbe: separate C22 and C45 transactions Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 21/25] net/axgbe: replace mii generic macro for c45 with AXGBE Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 22/25] net/axgbe: add 2.5GbE support to 10G BaseT mode Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 23/25] net/axgbe: add support for Rx adaptation Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 24/25] net/axgbe: extend 10Mbps support to MAC version 21H Venkat Kumar Ande
2024-06-04 12:11 ` [PATCH v3 25/25] net/axgbe: modify debug messages Venkat Kumar Ande
2024-06-05 17:07 ` [PATCH v3 01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240604121157.3052-5-venkatkumar.ande@amd.com \
--to=venkatkumar.ande@amd.com \
--cc=Selwin.Sebastian@amd.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).