DPDK patches and discussions
 help / color / mirror / Atom feed
From: Dean Marx <dmarx@iol.unh.edu>
To: Honnappa.Nagarahalli@arm.com, juraj.linkes@pantheon.tech,
	probb@iol.unh.edu, paul.szczepanek@arm.com,
	yoan.picchi@foss.arm.com, jspewock@iol.unh.edu,
	bruce.richardson@intel.com, luca.vizzarro@arm.com
Cc: dev@dpdk.org, Dean Marx <dmarx@iol.unh.edu>
Subject: [PATCH v6 1/3] dts: updated testpmd shell class
Date: Mon, 24 Jun 2024 14:17:41 -0400	[thread overview]
Message-ID: <20240624181743.19567-1-dmarx@iol.unh.edu> (raw)
In-Reply-To: <20240614150238.26374-1-dmarx@iol.unh.edu>

Ported over the promisc and verbose mode functions
from v2 of the queue start/stop suite to use for the VLAN suite.
Tweaked some of the verification methods to be
more concise, changed some docstrings to be more specific.

Signed-off-by: Dean Marx <dmarx@iol.unh.edu>
---
 dts/framework/remote_session/testpmd_shell.py | 260 ++++++++++++++++++
 1 file changed, 260 insertions(+)

diff --git a/dts/framework/remote_session/testpmd_shell.py b/dts/framework/remote_session/testpmd_shell.py
index cb2ab6bd00..89c9435c17 100644
--- a/dts/framework/remote_session/testpmd_shell.py
+++ b/dts/framework/remote_session/testpmd_shell.py
@@ -225,6 +225,266 @@ def set_forward_mode(self, mode: TestPmdForwardingModes, verify: bool = True):
                 f"Test pmd failed to set fwd mode to {mode.value}"
             )
 
+    def vlan_filter_set_on(self, port: int, verify: bool = True):
+        """Set vlan filter on.
+
+        Args:
+            port: The port number to use, should be within 0-32.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                vlan filtering was enabled successfully. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the filter
+                fails to update.
+        """
+        filter_cmd_output = self.send_command(f"vlan set filter on {port}")
+        if verify:
+            if "Invalid port" in filter_cmd_output or "filter on" not in self.send_command(f"show port info {port}"):
+                self._logger.debug(f"Failed to enable vlan filter on port {port}: \n{filter_cmd_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to enable vlan filter on port {port}.")
+
+    def vlan_filter_set_off(self, port: int, verify: bool = True):
+        """Set vlan filter off.
+
+        Args:
+            port: The port number to use, should be within 0-32.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                vlan filtering was disabled successfully. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the filter
+                fails to update.
+        """
+        filter_cmd_output = self.send_command(f"vlan set filter off {port}")
+        if verify:
+            if "Invalid port" in filter_cmd_output or "filter off" not in self.send_command(f"show port info {port}"):
+                self._logger.debug(f"Failed to disable vlan filter on port {port}: \n{filter_cmd_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to disable vlan filter on port {port}.")
+
+    def rx_vlan_add(self, vlan: int, port: int, verify: bool = True):
+        """Add specified vlan tag to the filter list on a port.
+
+        Args:
+            vlan: The vlan tag to add, should be within 1-1005, 1-4094 extended.
+            port: The port number to add the tag on, should be within 0-32.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                the vlan tag was added to the filter list on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the tag
+            is not added.
+        """
+        vlan_add_output = self.send_command(f"rx_vlan add {vlan} {port}")
+        if verify:
+            if "VLAN-filtering disabled" in vlan_add_output or "Invalid vlan_id" in vlan_add_output:
+                self._logger.debug(f"Failed to add vlan tag {vlan} on port {port}: \n{vlan_add_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to add vlan tag {vlan} on port {port}.")
+
+    def rx_vlan_rm(self, vlan: int, port: int, verify: bool = True):
+        """Remove specified vlan tag from filter list on a port.
+
+        Args:
+            vlan: The vlan tag to remove, should be within 1-4094.
+            port: The port number to remove the tag from, should be within 0-32.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                the vlan tag was removed from the filter list on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the tag
+            is not removed.
+        """
+        vlan_rm_output = self.send_command(f"rx_vlan rm {vlan} {port}")
+        if verify:
+            if "VLAN-filtering disabled" in vlan_rm_output or "Invalid vlan_id" in vlan_rm_output:
+                self._logger.debug(f"Failed to remove vlan tag {vlan} on port {port}: \n{vlan_rm_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to remove vlan tag {vlan} on port {port}.")
+
+    def vlan_strip_set_on(self, port: int, verify: bool = True):
+        """Enable vlan stripping on the specified port.
+
+        Args:
+            port: The port number to use, should be within 0-32.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                vlan stripping was enabled on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and stripping
+                fails to update.
+        """
+        vlan_strip_output = self.send_command(f"vlan set strip on {port}")
+        if verify:
+            if "strip on" not in self.send_command(f"show port info {port}"):
+                self._logger.debug(f"Failed to set vlan filter on for port {port}: \n{vlan_strip_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to set vlan filter on for port {port}.")
+
+    def vlan_strip_set_off(self, port: int, verify: bool = True):
+        """Disable vlan stripping on the specified port.
+
+        Args:
+            port: The port number to use, should be within 0-32
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                vlan stripping was disabled on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and stripping
+                fails to update.
+        """
+        vlan_strip_output = self.send_command(f"vlan set strip off {port}")
+        if verify:
+            if "strip off" not in self.send_command(f"show port info {port}"):
+                self._logger.debug(f"Failed to disable vlan stripping on port {port}: \n{vlan_strip_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to disable vlan stripping on port {port}.")
+
+    def port_stop_all(self, verify: bool = True):
+        """Stop all ports.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and all ports
+                fail to stop."""
+        port_output = self.send_command("port stop all")
+        if verify:
+            if "Done" not in port_output:
+                self._logger.debug(f"Failed to stop all ports: \n{port_output}")
+                raise InteractiveCommandExecutionError("Testpmd failed to stop all ports.")
+
+    def port_stop(self, port: int, verify: bool = True):
+        """Stop all ports.
+
+        Args:
+            port: specifies the port number to use, must be between 0-32
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the port
+                is not stopped."""
+        port_output = self.send_command(f"port stop {port}")
+        if verify:
+            if "Done" not in port_output:
+                self._logger.debug(f"Failed to stop port {port}: \n{port_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to stop port {port}.")
+
+    def port_start_all(self, verify: bool = True):
+        """Start all ports.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and all ports
+            fail to start."""
+        port_output = self.send_command("port start all")
+        if verify:
+            if "Done" not in port_output:
+                self._logger.debug(f"Failed to start all ports: \n{port_output}")
+                raise InteractiveCommandExecutionError("Testpmd failed to start all ports.")
+
+    def port_start(self, port: int, verify: bool = True):
+        """Stop all ports.
+
+        Args:
+            port: specifies the port number to use, must be between 0-32
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the port
+                is not started."""
+        port_output = self.send_command(f"port start {port}")
+        if verify:
+            if "Done" not in port_output:
+                self._logger.debug(f"Failed to start port {port}: \n{port_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to start port {port}.")
+
+
+    def tx_vlan_set(self, port: int, vlan: int, verify: bool = True):
+        """Set hardware insertion of vlan tags in packets sent on a port.
+
+        Args:
+            port: The port number to use, should be within 0-32.
+            vlan: The vlan tag to insert, should be within 1-4094.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                vlan insertion was enabled on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the insertion
+            tag is not set.
+        """
+        vlan_insert_output = self.send_command(f"tx_vlan set {port} {vlan}")
+        if verify:
+            if ("Please stop port" in vlan_insert_output or "Invalid vlan_id" in vlan_insert_output
+            or "Invalid port" in vlan_insert_output):
+                self._logger.debug(f"Failed to set vlan insertion tag {vlan} on port {port}: \n{vlan_insert_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to set vlan insertion tag {vlan} on port {port}.")
+
+    def tx_vlan_reset(self, port: int, verify: bool = True):
+        """Disable hardware insertion of vlan tags in packets sent on a port.
+
+        Args:
+            port: The port number to use, should be within 0-32.
+            verify: If :data:`True`, the output of the command is scanned to verify that
+                vlan insertion was disabled on the specified port. If not, it is
+                considered an error.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and the insertion
+                tag is not reset.
+        """
+        vlan_insert_output = self.send_command(f"tx_vlan set {port}")
+        if verify:
+            if "Please stop port" in vlan_insert_output or "Invalid port" in vlan_insert_output:
+                self._logger.debug(f"Failed to reset vlan insertion on port {port}: \n{vlan_insert_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to reset vlan insertion on port {port}.")
+
+    def set_promisc(self, port: int, on: bool, verify: bool = True):
+        """Turns promiscuous mode on/off for the specified port
+
+        Args:
+            port: port number to use, should be within 0-32.
+            on: if :data:`True`, turn promisc mode on, otherwise turn off.
+            verify: if :data:`True` an additional command will be sent to verify that promisc mode
+                is properly set. Defaults to :data:`True`.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and promisc mode
+            is not correctly set.
+        """
+        if on:
+            promisc_output = self.send_command(f"set promisc {port} on")
+        else:
+            promisc_output = self.send_command(f"set promisc {port} off")
+        if verify:
+            if (on and "Promiscuous mode: enabled" not in
+            self.send_command(f"show port info {port}")):
+                self._logger.debug(f"Failed to set promisc mode on port {port}: \n{promisc_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to set promisc mode on port {port}.")
+            elif (not on and "Promiscuous mode: disabled" not in
+            self.send_command(f"show port info {port}")):
+                self._logger.debug(f"Failed to set promisc mode on port {port}: \n{promisc_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to set promisc mode on port {port}.")
+
+
+    def set_verbose(self, level: int, verify: bool = True):
+        """Set debug verbosity level.
+
+        Args:
+            level: 0 - silent except for error
+            1 - fully verbose except for Tx packets
+            2 - fully verbose except for Rx packets
+            >2 - fully verbose
+            verify: if :data:`True` an additional command will be sent to verify that verbose level
+                is properly set. Defaults to :data:`True`.
+
+        Raises:
+            InteractiveCommandExecutionError: If `verify` is :data:`True` and verbose level
+            is not correctly set.
+        """
+        verbose_output = self.send_command(f"set verbose {level}")
+        if verify:
+            if "Change verbose level" not in verbose_output:
+                self._logger.debug(f"Failed to set verbose level to {level}: \n{verbose_output}")
+                raise InteractiveCommandExecutionError(f"Testpmd failed to set verbose level to {level}.")
+
     def close(self) -> None:
         """Overrides :meth:`~.interactive_shell.close`."""
         self.send_command("quit", "")
-- 
2.44.0


  parent reply	other threads:[~2024-06-24 18:18 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-11 16:15 [PATCH v2 0/2] VLAN test suite Dean Marx
2024-06-11 16:15 ` [PATCH v2 1/2] Initial implementation for " Dean Marx
2024-06-11 16:15 ` [PATCH v2 2/2] conf schema Dean Marx
2024-06-14 15:02 ` [PATCH v3 0/3] VLAN Test Suite Dean Marx
2024-06-14 15:02   ` [PATCH v3 1/3] Added VLAN commands to testpmd_shell class Dean Marx
2024-06-14 15:59     ` Patrick Robb
2024-06-14 20:29       ` Jeremy Spewock
2024-06-14 21:24         ` Patrick Robb
2024-06-17 14:37     ` Jeremy Spewock
2024-06-14 15:02   ` [PATCH v3 2/3] Initial implementation for VLAN test suite Dean Marx
2024-06-14 16:19     ` Patrick Robb
2024-06-17 14:56     ` Jeremy Spewock
2024-06-14 15:02   ` [PATCH v3 3/3] Config schema Dean Marx
2024-06-17 14:59     ` Jeremy Spewock
2024-06-17 14:35   ` [PATCH v3 0/3] VLAN Test Suite Jeremy Spewock
2024-06-17 17:50   ` Patrick Robb
2024-06-18 15:20   ` [PATCH v4 1/3] dts: refactored VLAN test suite Dean Marx
2024-06-18 15:20     ` [PATCH v4 2/3] dts: updated testpmd shell class Dean Marx
2024-06-18 15:20     ` [PATCH v4 3/3] dts: config schema Dean Marx
2024-06-18 16:29   ` [PATCH v5 1/3] dts: updated testpmd shell class Dean Marx
2024-06-18 16:29     ` [PATCH v5 2/3] dts: refactored VLAN test suite Dean Marx
2024-06-21 20:53       ` Jeremy Spewock
2024-06-18 16:29     ` [PATCH v5 3/3] dts: config schema Dean Marx
2024-06-21 20:53       ` Jeremy Spewock
2024-06-21 20:50     ` [PATCH v5 1/3] dts: updated testpmd shell class Jeremy Spewock
2024-06-24 18:17   ` Dean Marx [this message]
2024-06-24 18:17     ` [PATCH v6 2/3] dts: refactored VLAN test suite Dean Marx
2024-06-24 18:17     ` [PATCH v6 3/3] dts: config schema Dean Marx
2024-06-25 15:33   ` [PATCH v7 1/3] dts: VLAN test suite implementation Dean Marx
2024-06-25 15:33     ` [PATCH v7 2/3] dts: add VLAN methods to testpmd shell Dean Marx
2024-06-26 18:22       ` Jeremy Spewock
2024-06-25 15:33     ` [PATCH v7 3/3] dts: config schema Dean Marx
2024-06-26 18:23       ` Jeremy Spewock
2024-06-26 18:21     ` [PATCH v7 1/3] dts: VLAN test suite implementation Jeremy Spewock
2024-06-28 14:00   ` [PATCH v8 1/3] dts: add VLAN methods to testpmd shell Dean Marx
2024-06-28 14:00     ` [PATCH v8 2/3] dts: VLAN test suite implementation Dean Marx
2024-07-01 19:52       ` Jeremy Spewock
2024-06-28 14:00     ` [PATCH v8 3/3] dts: config schema Dean Marx
2024-07-01 19:48     ` [PATCH v8 1/3] dts: add VLAN methods to testpmd shell Jeremy Spewock
2024-07-03 16:47   ` [PATCH v9 1/3] dts: config schema Dean Marx
2024-07-03 16:47     ` [PATCH v9 2/3] dts: VLAN test suite implementation Dean Marx
2024-07-03 16:47     ` [PATCH v9 3/3] dts: add VLAN methods to testpmd shell Dean Marx
2024-07-09 21:22       ` Jeremy Spewock
2024-07-03 16:50   ` [PATCH v10 1/3] " Dean Marx
2024-07-03 16:50     ` [PATCH v10 2/3] dts: VLAN test suite implementation Dean Marx
2024-07-09 21:22       ` Jeremy Spewock
2024-07-03 16:50     ` [PATCH v10 3/3] dts: config schema Dean Marx
2024-07-05 15:55       ` Patrick Robb
2024-07-10 15:38       ` Jeremy Spewock
2024-07-17 20:31   ` [PATCH v11 1/3] dts: add VLAN methods to testpmd shell Dean Marx
2024-07-17 20:31     ` [PATCH v11 2/3] dts: VLAN test suite implementation Dean Marx
2024-07-19 15:35       ` Jeremy Spewock
2024-07-17 20:31     ` [PATCH v11 3/3] dts: config schema Dean Marx
2024-07-19 15:35       ` Jeremy Spewock
2024-07-19 15:35     ` [PATCH v11 1/3] dts: add VLAN methods to testpmd shell Jeremy Spewock
2024-07-24 16:30 ` [PATCH v12 0/3] dts: refactored VLAN test suite Dean Marx
2024-07-24 16:30   ` [PATCH v12 1/3] dts: add VLAN methods to testpmd shell Dean Marx
2024-07-24 16:30   ` [PATCH v12 2/3] dts: VLAN test suite implementation Dean Marx
2024-07-24 16:30   ` [PATCH v12 3/3] dts: config schema Dean Marx
2024-08-07 19:43   ` [PATCH v13 0/2] dts: refactored VLAN test suite Dean Marx
2024-08-07 19:43     ` [PATCH v13 1/2] dts: add VLAN methods to testpmd shell Dean Marx
2024-08-09 17:23       ` Jeremy Spewock
2024-08-07 19:43     ` [PATCH v13 2/2] dts: VLAN test suite implementation Dean Marx
2024-08-09 17:23       ` Jeremy Spewock
2024-08-23 21:16     ` [PATCH v14 0/2] dts: port over VLAN test suite Dean Marx
2024-08-23 21:16       ` [PATCH v14 1/2] dts: add VLAN methods to testpmd shell Dean Marx
2024-09-04 19:49         ` Jeremy Spewock
2024-08-23 21:16       ` [PATCH v14 2/2] dts: VLAN test suite implementation Dean Marx
2024-09-04 19:49         ` Jeremy Spewock
2024-09-11 17:43     ` [PATCH v14 0/1] dts: port over VLAN test suite Dean Marx
2024-09-11 17:43       ` [PATCH v14 1/1] dts: VLAN test suite implementation Dean Marx
2024-09-18 20:38       ` [PATCH v15 0/1] dts: port over VLAN test suite Dean Marx
2024-09-18 20:38         ` [PATCH v15 1/1] dts: VLAN test suite implementation Dean Marx
2024-09-18 20:49       ` [PATCH v15 0/1] dts: port over VLAN test suite Dean Marx
2024-09-18 20:49         ` [PATCH v15] dts: VLAN test suite implementation Dean Marx
2024-10-08 17:20           ` [PATCH v16 0/1] dts: port over VLAN test suite Dean Marx
2024-10-08 17:20             ` [PATCH v16] dts: VLAN test suite implementation Dean Marx
2024-10-08 19:18               ` [PATCH v17 0/1] port over VLAN test suite Dean Marx
2024-10-08 19:18                 ` [PATCH v17 1/1] dts: VLAN test suite implementation Dean Marx

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240624181743.19567-1-dmarx@iol.unh.edu \
    --to=dmarx@iol.unh.edu \
    --cc=Honnappa.Nagarahalli@arm.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=jspewock@iol.unh.edu \
    --cc=juraj.linkes@pantheon.tech \
    --cc=luca.vizzarro@arm.com \
    --cc=paul.szczepanek@arm.com \
    --cc=probb@iol.unh.edu \
    --cc=yoan.picchi@foss.arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).