[PATCH 0/6] Some drivers logging cleanups

[PATCH 0/6] Some drivers logging cleanups

[David Marchand]

This series removes the last direct calls to some RTE_LOGTYPE_ coming
from libraries (EAL and CRYPTODEV) and replaces them with dedicated
macros coming from the drivers.


-- 
David Marchand

David Marchand (6):
  vdpa/sfc: remove dead code
  drivers: use dedicated log macros instead of EAL logtype
  net/sfc: remove use of EAL logtype
  vdpa/sfc: remove use of EAL logtype
  bus/pci: use a dynamic logtype
  crypto/ccp: use a dynamic logtype

 drivers/bus/auxiliary/auxiliary_common.c |   4 +-
 drivers/bus/dpaa/dpaa_bus.c              |   4 +-
 drivers/bus/fslmc/fslmc_vfio.c           |   2 +-
 drivers/bus/pci/bsd/pci.c                |  44 +++---
 drivers/bus/pci/linux/pci.c              |  52 +++----
 drivers/bus/pci/linux/pci_uio.c          |  75 ++++------
 drivers/bus/pci/linux/pci_vfio.c         | 173 ++++++++++-------------
 drivers/bus/pci/pci_common.c             |  85 +++++------
 drivers/bus/pci/pci_common_uio.c         |  15 +-
 drivers/bus/pci/pci_params.c             |   9 +-
 drivers/bus/pci/private.h                |   6 +
 drivers/bus/pci/windows/pci.c            |  13 +-
 drivers/bus/pci/windows/pci_netuio.c     |   7 +-
 drivers/common/qat/qat_device.c          |   4 +-
 drivers/crypto/ccp/ccp_crypto.c          |   4 +-
 drivers/crypto/ccp/ccp_pmd_private.h     |  15 +-
 drivers/crypto/ccp/rte_ccp_pmd.c         |   2 +
 drivers/net/cnxk/cnxk_rep_msg.c          |   2 +-
 drivers/net/cpfl/cpfl_ethdev.c           |   2 +-
 drivers/net/mlx4/mlx4.c                  |   2 +-
 drivers/net/sfc/sfc_ethdev.c             |  12 +-
 drivers/net/sfc/sfc_log.h                |   2 +-
 drivers/vdpa/sfc/sfc_vdpa.c              |   6 +-
 drivers/vdpa/sfc/sfc_vdpa_hw.c           |   2 -
 24 files changed, 226 insertions(+), 316 deletions(-)

-- 
2.45.2

[PATCH 1/6] vdpa/sfc: remove dead code

[David Marchand]

This is probably a copy/paste from the net/sfc driver.
sfc_logtype_driver is not a logtype variable from the sfc vDPA driver.
Remove it.

Fixes: 6dad9a7353d4 ("vdpa/sfc: support device initialization")
Cc: stable@dpdk.org

Signed-off-by: David Marchand <david.marchand@redhat.com>
---
 drivers/vdpa/sfc/sfc_vdpa_hw.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/vdpa/sfc/sfc_vdpa_hw.c b/drivers/vdpa/sfc/sfc_vdpa_hw.c
index edb7e35c2c..7e43719f53 100644
--- a/drivers/vdpa/sfc/sfc_vdpa_hw.c
+++ b/drivers/vdpa/sfc/sfc_vdpa_hw.c
@@ -13,8 +13,6 @@
 #include "sfc_vdpa.h"
 #include "sfc_vdpa_ops.h"
 
-extern uint32_t sfc_logtype_driver;
-
 #ifndef PAGE_SIZE
 #define PAGE_SIZE   (sysconf(_SC_PAGESIZE))
 #endif
-- 
2.45.2

[PATCH 2/6] drivers: use dedicated log macros instead of EAL logtype

[David Marchand]

Those drivers already have their own logtype and set of logging macros.
Use them instead of logging as EAL.

Signed-off-by: David Marchand <david.marchand@redhat.com>
---
 drivers/bus/auxiliary/auxiliary_common.c | 4 ++--
 drivers/bus/dpaa/dpaa_bus.c              | 4 ++--
 drivers/bus/fslmc/fslmc_vfio.c           | 2 +-
 drivers/common/qat/qat_device.c          | 4 ++--
 drivers/net/cnxk/cnxk_rep_msg.c          | 2 +-
 drivers/net/cpfl/cpfl_ethdev.c           | 2 +-
 drivers/net/mlx4/mlx4.c                  | 2 +-
 7 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/bus/auxiliary/auxiliary_common.c b/drivers/bus/auxiliary/auxiliary_common.c
index 29f99342a7..e6cbc4d356 100644
--- a/drivers/bus/auxiliary/auxiliary_common.c
+++ b/drivers/bus/auxiliary/auxiliary_common.c
@@ -106,10 +106,10 @@ rte_auxiliary_probe_one_driver(struct rte_auxiliary_driver *drv,
 	}
 
 	if (dev->device.numa_node < 0 && rte_socket_count() > 1)
-		RTE_LOG(INFO, EAL, "Device %s is not NUMA-aware\n", dev->name);
+		AUXILIARY_LOG(INFO, "Device %s is not NUMA-aware", dev->name);
 
 	if (rte_dev_is_probed(&dev->device)) {
-		RTE_LOG(DEBUG, EAL, "Device %s is already probed on auxiliary bus\n",
+		AUXILIARY_LOG(DEBUG, "Device %s is already probed on auxiliary bus",
 			dev->device.name);
 		return -EEXIST;
 	}
diff --git a/drivers/bus/dpaa/dpaa_bus.c b/drivers/bus/dpaa/dpaa_bus.c
index 5d4352bb3c..bb27daef38 100644
--- a/drivers/bus/dpaa/dpaa_bus.c
+++ b/drivers/bus/dpaa/dpaa_bus.c
@@ -499,7 +499,7 @@ rte_dpaa_bus_scan(void)
 
 	if ((access(DPAA_DEV_PATH1, F_OK) != 0) &&
 	    (access(DPAA_DEV_PATH2, F_OK) != 0)) {
-		RTE_LOG(DEBUG, EAL, "DPAA Bus not present. Skipping.\n");
+		DPAA_BUS_LOG(DEBUG, "DPAA Bus not present. Skipping.");
 		return 0;
 	}
 
@@ -578,7 +578,7 @@ rte_dpaa_bus_dev_build(void)
 		return -EINVAL;
 	}
 
-	RTE_LOG(NOTICE, EAL, "DPAA Bus Detected\n");
+	DPAA_BUS_LOG(NOTICE, "DPAA Bus Detected");
 
 	if (!dpaa_netcfg->num_ethports) {
 		DPAA_BUS_LOG(INFO, "NO DPDK mapped net interfaces available");
diff --git a/drivers/bus/fslmc/fslmc_vfio.c b/drivers/bus/fslmc/fslmc_vfio.c
index 5966776a85..43f6a630ea 100644
--- a/drivers/bus/fslmc/fslmc_vfio.c
+++ b/drivers/bus/fslmc/fslmc_vfio.c
@@ -464,7 +464,7 @@ fslmc_vfio_setup_device(const char *sysfs_base, const char *dev_addr,
 	 * isn't managed by VFIO
 	 */
 	if (vfio_group_fd == -ENOENT) {
-		RTE_LOG(WARNING, EAL, " %s not managed by VFIO driver, skipping\n",
+		DPAA2_BUS_WARN(" %s not managed by VFIO driver, skipping",
 				dev_addr);
 		return 1;
 	}
diff --git a/drivers/common/qat/qat_device.c b/drivers/common/qat/qat_device.c
index c6ac7a0015..4a972a83bd 100644
--- a/drivers/common/qat/qat_device.c
+++ b/drivers/common/qat/qat_device.c
@@ -372,8 +372,8 @@ qat_pci_device_allocate(struct rte_pci_device *pci_dev)
 		"QAT internal error! Read slice function not set, gen : %d",
 		qat_dev_gen);
 	if (ops_hw->qat_dev_get_slice_map(&qat_dev->options.slice_map, pci_dev) < 0) {
-		RTE_LOG(ERR, EAL,
-			"Cannot read slice configuration\n");
+		QAT_LOG(ERR,
+			"Cannot read slice configuration");
 		goto error;
 	}
 	rte_spinlock_init(&qat_dev->arb_csr_lock);
diff --git a/drivers/net/cnxk/cnxk_rep_msg.c b/drivers/net/cnxk/cnxk_rep_msg.c
index f3a62a805e..324ac219d0 100644
--- a/drivers/net/cnxk/cnxk_rep_msg.c
+++ b/drivers/net/cnxk/cnxk_rep_msg.c
@@ -116,7 +116,7 @@ open_socket_ctrl_channel(void)
 
 	sock_fd = socket(AF_UNIX, SOCK_STREAM, 0);
 	if (sock_fd < 0) {
-		RTE_LOG(ERR, EAL, "failed to create unix socket\n");
+		plt_err("Failed to create unix socket");
 		return -1;
 	}
 
diff --git a/drivers/net/cpfl/cpfl_ethdev.c b/drivers/net/cpfl/cpfl_ethdev.c
index 7e718e9e19..d5ded338d4 100644
--- a/drivers/net/cpfl/cpfl_ethdev.c
+++ b/drivers/net/cpfl/cpfl_ethdev.c
@@ -1579,7 +1579,7 @@ parse_repr(const char *key __rte_unused, const char *value, void *args)
 		RTE_DIM(eth_da->representor_ports));
 done:
 	if (str == NULL) {
-		RTE_LOG(ERR, EAL, "wrong representor format: %s\n", str);
+		PMD_DRV_LOG(ERR, "wrong representor format: %s", str);
 		return -1;
 	}
 
diff --git a/drivers/net/mlx4/mlx4.c b/drivers/net/mlx4/mlx4.c
index a1a7e93288..c19db5c0eb 100644
--- a/drivers/net/mlx4/mlx4.c
+++ b/drivers/net/mlx4/mlx4.c
@@ -1058,7 +1058,7 @@ mlx4_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
 		priv->intr_handle =
 			rte_intr_instance_alloc(RTE_INTR_INSTANCE_F_SHARED);
 		if (priv->intr_handle == NULL) {
-			RTE_LOG(ERR, EAL, "Fail to allocate intr_handle\n");
+			ERROR("can not allocate intr_handle");
 			goto port_error;
 		}
 
-- 
2.45.2

[PATCH 3/6] net/sfc: remove use of EAL logtype

[David Marchand]

When registering a common logtype for this driver, instead of
explicitly fall back to EAL, rely on the log registration macro to
achieve the same.

Signed-off-by: David Marchand <david.marchand@redhat.com>
---
 drivers/net/sfc/sfc_ethdev.c | 12 +-----------
 drivers/net/sfc/sfc_log.h    |  2 +-
 2 files changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/net/sfc/sfc_ethdev.c b/drivers/net/sfc/sfc_ethdev.c
index 92ca5e7a60..24686a1eaf 100644
--- a/drivers/net/sfc/sfc_ethdev.c
+++ b/drivers/net/sfc/sfc_ethdev.c
@@ -37,8 +37,6 @@
 #define SFC_XSTAT_ID_INVALID_VAL  UINT64_MAX
 #define SFC_XSTAT_ID_INVALID_NAME '\0'
 
-uint32_t sfc_logtype_driver;
-
 static struct sfc_dp_list sfc_dp_head =
 	TAILQ_HEAD_INITIALIZER(sfc_dp_head);
 
@@ -3618,12 +3616,4 @@ RTE_PMD_REGISTER_PARAM_STRING(net_sfc_efx,
 	SFC_KVARG_FW_VARIANT "=" SFC_KVARG_VALUES_FW_VARIANT " "
 	SFC_KVARG_RXD_WAIT_TIMEOUT_NS "=<long> "
 	SFC_KVARG_STATS_UPDATE_PERIOD_MS "=<long>");
-
-RTE_INIT(sfc_driver_register_logtype)
-{
-	int ret;
-
-	ret = rte_log_register_type_and_pick_level(SFC_LOGTYPE_PREFIX "driver",
-						   RTE_LOG_NOTICE);
-	sfc_logtype_driver = (ret < 0) ? RTE_LOGTYPE_EAL : ret;
-}
+RTE_LOG_REGISTER_SUFFIX(sfc_logtype_driver, "driver", NOTICE);
diff --git a/drivers/net/sfc/sfc_log.h b/drivers/net/sfc/sfc_log.h
index d54277cb7a..10a9ce6ced 100644
--- a/drivers/net/sfc/sfc_log.h
+++ b/drivers/net/sfc/sfc_log.h
@@ -11,7 +11,7 @@
 #define _SFC_LOG_H_
 
 /** Generic driver log type */
-extern uint32_t sfc_logtype_driver;
+extern int sfc_logtype_driver;
 
 /** Common log type name prefix */
 #define SFC_LOGTYPE_PREFIX	"pmd.net.sfc."
-- 
2.45.2

[PATCH 4/6] vdpa/sfc: remove use of EAL logtype

[David Marchand]

If registering a dynamic logtype fails at runtime, fall back to a
common logtype.

Signed-off-by: David Marchand <david.marchand@redhat.com>
---
 drivers/vdpa/sfc/sfc_vdpa.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/vdpa/sfc/sfc_vdpa.c b/drivers/vdpa/sfc/sfc_vdpa.c
index 9db87fcb7d..eda111954f 100644
--- a/drivers/vdpa/sfc/sfc_vdpa.c
+++ b/drivers/vdpa/sfc/sfc_vdpa.c
@@ -181,12 +181,12 @@ sfc_vdpa_register_logtype(const struct rte_pci_addr *pci_addr,
 		++lt_prefix_str_size; /* Reserve space for prefix separator */
 		lt_str_size_max = lt_prefix_str_size + PCI_PRI_STR_SIZE + 1;
 	} else {
-		return RTE_LOGTYPE_EAL;
+		return sfc_vdpa_logtype_driver;
 	}
 
 	lt_str = rte_zmalloc("logtype_str", lt_str_size_max, 0);
 	if (lt_str == NULL)
-		return RTE_LOGTYPE_EAL;
+		return sfc_vdpa_logtype_driver;
 
 	strncpy(lt_str, lt_prefix_str, lt_prefix_str_size);
 	lt_str[lt_prefix_str_size - 1] = '.';
@@ -197,7 +197,7 @@ sfc_vdpa_register_logtype(const struct rte_pci_addr *pci_addr,
 	ret = rte_log_register_type_and_pick_level(lt_str, ll_default);
 	rte_free(lt_str);
 
-	return ret < 0 ? RTE_LOGTYPE_EAL : ret;
+	return ret < 0 ? sfc_vdpa_logtype_driver : ret;
 }
 
 static int
-- 
2.45.2

[PATCH 5/6] bus/pci: use a dynamic logtype

[David Marchand]

Register a logtype for this bus driver and stop logging as EAL.

Signed-off-by: David Marchand <david.marchand@redhat.com>
---
 drivers/bus/pci/bsd/pci.c            |  44 +++----
 drivers/bus/pci/linux/pci.c          |  52 ++++----
 drivers/bus/pci/linux/pci_uio.c      |  75 +++++-------
 drivers/bus/pci/linux/pci_vfio.c     | 173 +++++++++++----------------
 drivers/bus/pci/pci_common.c         |  85 ++++++-------
 drivers/bus/pci/pci_common_uio.c     |  15 +--
 drivers/bus/pci/pci_params.c         |   9 +-
 drivers/bus/pci/private.h            |   6 +
 drivers/bus/pci/windows/pci.c        |  13 +-
 drivers/bus/pci/windows/pci_netuio.c |   7 +-
 10 files changed, 202 insertions(+), 277 deletions(-)

diff --git a/drivers/bus/pci/bsd/pci.c b/drivers/bus/pci/bsd/pci.c
index 27f12590d4..2f88252418 100644
--- a/drivers/bus/pci/bsd/pci.c
+++ b/drivers/bus/pci/bsd/pci.c
@@ -60,8 +60,7 @@ rte_pci_map_device(struct rte_pci_device *dev)
 		ret = pci_uio_map_resource(dev);
 		break;
 	default:
-		RTE_LOG(DEBUG, EAL,
-			"  Not managed by a supported kernel driver, skipped\n");
+		PCI_LOG(DEBUG, "  Not managed by a supported kernel driver, skipped");
 		ret = 1;
 		break;
 	}
@@ -80,8 +79,7 @@ rte_pci_unmap_device(struct rte_pci_device *dev)
 		pci_uio_unmap_resource(dev);
 		break;
 	default:
-		RTE_LOG(DEBUG, EAL,
-			"  Not managed by a supported kernel driver, skipped\n");
+		PCI_LOG(DEBUG, "  Not managed by a supported kernel driver, skipped");
 		break;
 	}
 }
@@ -112,20 +110,19 @@ pci_uio_alloc_resource(struct rte_pci_device *dev,
 			dev->addr.bus, dev->addr.devid, dev->addr.function);
 
 	if (access(devname, O_RDWR) < 0) {
-		RTE_LOG(WARNING, EAL, "  "PCI_PRI_FMT" not managed by UIO driver, "
-				"skipping\n", loc->domain, loc->bus, loc->devid, loc->function);
+		PCI_LOG(WARNING, "  "PCI_PRI_FMT" not managed by UIO driver, skipping",
+			loc->domain, loc->bus, loc->devid, loc->function);
 		return 1;
 	}
 
 	/* save fd if in primary process */
 	if (rte_intr_fd_set(dev->intr_handle, open(devname, O_RDWR))) {
-		RTE_LOG(WARNING, EAL, "Failed to save fd");
+		PCI_LOG(WARNING, "Failed to save fd");
 		goto error;
 	}
 
 	if (rte_intr_fd_get(dev->intr_handle) < 0) {
-		RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
-			devname, strerror(errno));
+		PCI_LOG(ERR, "Cannot open %s: %s", devname, strerror(errno));
 		goto error;
 	}
 
@@ -135,8 +132,7 @@ pci_uio_alloc_resource(struct rte_pci_device *dev,
 	/* allocate the mapping details for secondary processes*/
 	*uio_res = rte_zmalloc("UIO_RES", sizeof(**uio_res), 0);
 	if (*uio_res == NULL) {
-		RTE_LOG(ERR, EAL,
-			"%s(): cannot store uio mmap details\n", __func__);
+		PCI_LOG(ERR, "%s(): cannot store uio mmap details", __func__);
 		goto error;
 	}
 
@@ -168,8 +164,7 @@ pci_uio_map_resource_by_index(struct rte_pci_device *dev, int res_idx,
 	/* allocate memory to keep path */
 	maps[map_idx].path = rte_malloc(NULL, strlen(devname) + 1, 0);
 	if (maps[map_idx].path == NULL) {
-		RTE_LOG(ERR, EAL, "Cannot allocate memory for path: %s\n",
-				strerror(errno));
+		PCI_LOG(ERR, "Cannot allocate memory for path: %s", strerror(errno));
 		return -1;
 	}
 
@@ -178,8 +173,7 @@ pci_uio_map_resource_by_index(struct rte_pci_device *dev, int res_idx,
 	 */
 	fd = open(devname, O_RDWR);
 	if (fd < 0) {
-		RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
-				devname, strerror(errno));
+		PCI_LOG(ERR, "Cannot open %s: %s", devname, strerror(errno));
 		goto error;
 	}
 
@@ -215,7 +209,7 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
 
 	pdev = malloc(sizeof(*pdev));
 	if (pdev == NULL) {
-		RTE_LOG(ERR, EAL, "Cannot allocate memory for internal pci device\n");
+		PCI_LOG(ERR, "Cannot allocate memory for internal pci device");
 		return -1;
 	}
 
@@ -345,15 +339,15 @@ rte_pci_scan(void)
 
 	fd = open("/dev/pci", O_RDONLY);
 	if (fd < 0) {
-		RTE_LOG(ERR, EAL, "%s(): error opening /dev/pci\n", __func__);
+		PCI_LOG(ERR, "%s(): error opening /dev/pci", __func__);
 		goto error;
 	}
 
 	do {
 		unsigned i;
 		if (ioctl(fd, PCIOCGETCONF, &conf_io) < 0) {
-			RTE_LOG(ERR, EAL, "%s(): error with ioctl on /dev/pci: %s\n",
-					__func__, strerror(errno));
+			PCI_LOG(ERR, "%s(): error with ioctl on /dev/pci: %s",
+				__func__, strerror(errno));
 			goto error;
 		}
 
@@ -375,7 +369,7 @@ rte_pci_scan(void)
 
 	close(fd);
 
-	RTE_LOG(DEBUG, EAL, "PCI scan found %u devices\n", dev_count);
+	PCI_LOG(DEBUG, "PCI scan found %u devices", dev_count);
 	return 0;
 
 error:
@@ -395,7 +389,7 @@ pci_device_iova_mode(const struct rte_pci_driver *pdrv __rte_unused,
 		     const struct rte_pci_device *pdev)
 {
 	if (pdev->kdrv != RTE_PCI_KDRV_NIC_UIO)
-		RTE_LOG(DEBUG, EAL, "Unsupported kernel driver? Defaulting to IOVA as 'PA'\n");
+		PCI_LOG(DEBUG, "Unsupported kernel driver? Defaulting to IOVA as 'PA'");
 
 	return RTE_IOVA_PA;
 }
@@ -420,7 +414,7 @@ int rte_pci_read_config(const struct rte_pci_device *dev,
 
 	fd = open("/dev/pci", O_RDWR);
 	if (fd < 0) {
-		RTE_LOG(ERR, EAL, "%s(): error opening /dev/pci\n", __func__);
+		PCI_LOG(ERR, "%s(): error opening /dev/pci", __func__);
 		goto error;
 	}
 
@@ -465,7 +459,7 @@ int rte_pci_write_config(const struct rte_pci_device *dev,
 	};
 
 	if (len == 3 || len > sizeof(pi.pi_data)) {
-		RTE_LOG(ERR, EAL, "%s(): invalid pci read length\n", __func__);
+		PCI_LOG(ERR, "%s(): invalid pci read length", __func__);
 		goto error;
 	}
 
@@ -473,7 +467,7 @@ int rte_pci_write_config(const struct rte_pci_device *dev,
 
 	fd = open("/dev/pci", O_RDWR);
 	if (fd < 0) {
-		RTE_LOG(ERR, EAL, "%s(): error opening /dev/pci\n", __func__);
+		PCI_LOG(ERR, "%s(): error opening /dev/pci", __func__);
 		goto error;
 	}
 
@@ -521,7 +515,7 @@ rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
 #if defined(RTE_ARCH_X86)
 	case RTE_PCI_KDRV_NIC_UIO:
 		if (rte_eal_iopl_init() != 0) {
-			RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
+			PCI_LOG(ERR, "%s(): insufficient ioport permissions for PCI device %s",
 				__func__, dev->name);
 			return -1;
 		}
diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
index 3d237398d9..9056035b33 100644
--- a/drivers/bus/pci/linux/pci.c
+++ b/drivers/bus/pci/linux/pci.c
@@ -75,8 +75,7 @@ rte_pci_map_device(struct rte_pci_device *dev)
 		}
 		break;
 	default:
-		RTE_LOG(DEBUG, EAL,
-			"  Not managed by a supported kernel driver, skipped\n");
+		PCI_LOG(DEBUG, "  Not managed by a supported kernel driver, skipped");
 		ret = 1;
 		break;
 	}
@@ -102,8 +101,7 @@ rte_pci_unmap_device(struct rte_pci_device *dev)
 		pci_uio_unmap_resource(dev);
 		break;
 	default:
-		RTE_LOG(DEBUG, EAL,
-			"  Not managed by a supported kernel driver, skipped\n");
+		PCI_LOG(DEBUG, "  Not managed by a supported kernel driver, skipped");
 		break;
 	}
 }
@@ -147,8 +145,7 @@ pci_parse_one_sysfs_resource(char *line, size_t len, uint64_t *phys_addr,
 	} res_info;
 
 	if (rte_strsplit(line, len, res_info.ptrs, 3, ' ') != 3) {
-		RTE_LOG(ERR, EAL,
-			"%s(): bad resource format\n", __func__);
+		PCI_LOG(ERR, "%s(): bad resource format", __func__);
 		return -1;
 	}
 	errno = 0;
@@ -156,8 +153,7 @@ pci_parse_one_sysfs_resource(char *line, size_t len, uint64_t *phys_addr,
 	*end_addr = strtoull(res_info.end_addr, NULL, 16);
 	*flags = strtoull(res_info.flags, NULL, 16);
 	if (errno != 0) {
-		RTE_LOG(ERR, EAL,
-			"%s(): bad resource format\n", __func__);
+		PCI_LOG(ERR, "%s(): bad resource format", __func__);
 		return -1;
 	}
 
@@ -175,15 +171,14 @@ pci_parse_sysfs_resource(const char *filename, struct rte_pci_device *dev)
 
 	f = fopen(filename, "r");
 	if (f == NULL) {
-		RTE_LOG(ERR, EAL, "Cannot open sysfs resource\n");
+		PCI_LOG(ERR, "Cannot open sysfs resource");
 		return -1;
 	}
 
 	for (i = 0; i<PCI_MAX_RESOURCE; i++) {
 
 		if (fgets(buf, sizeof(buf), f) == NULL) {
-			RTE_LOG(ERR, EAL,
-				"%s(): cannot read resource\n", __func__);
+			PCI_LOG(ERR, "%s(): cannot read resource", __func__);
 			goto error;
 		}
 		if (pci_parse_one_sysfs_resource(buf, sizeof(buf), &phys_addr,
@@ -218,7 +213,7 @@ pci_scan_one(const char *dirname, const struct rte_pci_addr *addr)
 
 	pdev = malloc(sizeof(*pdev));
 	if (pdev == NULL) {
-		RTE_LOG(ERR, EAL, "Cannot allocate memory for internal pci device\n");
+		PCI_LOG(ERR, "Cannot allocate memory for internal pci device");
 		return -1;
 	}
 
@@ -300,7 +295,7 @@ pci_scan_one(const char *dirname, const struct rte_pci_addr *addr)
 	/* parse resources */
 	snprintf(filename, sizeof(filename), "%s/resource", dirname);
 	if (pci_parse_sysfs_resource(filename, dev) < 0) {
-		RTE_LOG(ERR, EAL, "%s(): cannot parse resource\n", __func__);
+		PCI_LOG(ERR, "%s(): cannot parse resource", __func__);
 		pci_free(pdev);
 		return -1;
 	}
@@ -309,7 +304,7 @@ pci_scan_one(const char *dirname, const struct rte_pci_addr *addr)
 	snprintf(filename, sizeof(filename), "%s/driver", dirname);
 	ret = pci_get_kernel_driver_by_path(filename, driver, sizeof(driver));
 	if (ret < 0) {
-		RTE_LOG(ERR, EAL, "Fail to get kernel driver\n");
+		PCI_LOG(ERR, "Fail to get kernel driver");
 		pci_free(pdev);
 		return -1;
 	}
@@ -371,7 +366,7 @@ pci_scan_one(const char *dirname, const struct rte_pci_addr *addr)
 						 * So we just print out the
 						 * error as an alarm.
 						 */
-						RTE_LOG(ERR, EAL, "Unexpected device scan at %s!\n",
+						PCI_LOG(ERR, "Unexpected device scan at %s!",
 							filename);
 					else if (dev2->device.devargs !=
 						 dev->device.devargs) {
@@ -454,8 +449,7 @@ rte_pci_scan(void)
 
 	dir = opendir(rte_pci_get_sysfs_path());
 	if (dir == NULL) {
-		RTE_LOG(ERR, EAL, "%s(): opendir failed: %s\n",
-			__func__, strerror(errno));
+		PCI_LOG(ERR, "%s(): opendir failed: %s", __func__, strerror(errno));
 		return -1;
 	}
 
@@ -505,14 +499,14 @@ pci_device_iommu_support_va(const struct rte_pci_device *dev)
 		if (errno == ENOENT)
 			return true;
 
-		RTE_LOG(ERR, EAL, "%s(): can't open %s: %s\n",
+		PCI_LOG(ERR, "%s(): can't open %s: %s",
 			__func__, filename, strerror(errno));
 		return false;
 	}
 
 	/* We have an Intel IOMMU */
 	if (fscanf(fp, "%" PRIx64, &vtd_cap_reg) != 1) {
-		RTE_LOG(ERR, EAL, "%s(): can't read %s\n", __func__, filename);
+		PCI_LOG(ERR, "%s(): can't read %s", __func__, filename);
 		fclose(fp);
 		return false;
 	}
@@ -556,7 +550,7 @@ pci_device_iommu_support_va(__rte_unused const struct rte_pci_device *dev)
 	bool ret = false;
 
 	if (fp == NULL) {
-		RTE_LOG(ERR, EAL, "%s(): can't open %s: %s\n",
+		PCI_LOG(ERR, "%s(): can't open %s: %s",
 			__func__, filename, strerror(errno));
 		return ret;
 	}
@@ -565,15 +559,15 @@ pci_device_iommu_support_va(__rte_unused const struct rte_pci_device *dev)
 	while (getline(&line, &len, fp) != -1) {
 		if (strstr(line, "platform") != NULL) {
 			if (strstr(line, "PowerNV") != NULL) {
-				RTE_LOG(DEBUG, EAL, "Running on a PowerNV platform\n");
+				PCI_LOG(DEBUG, "Running on a PowerNV platform");
 				powernv = true;
 			} else if (strstr(line, "pSeries") != NULL) {
-				RTE_LOG(DEBUG, EAL, "Running on a pSeries platform\n");
+				PCI_LOG(DEBUG, "Running on a pSeries platform");
 				pseries = true;
 			}
 		} else if (strstr(line, "model") != NULL) {
 			if (strstr(line, "qemu") != NULL) {
-				RTE_LOG(DEBUG, EAL, "Found qemu emulation\n");
+				PCI_LOG(DEBUG, "Found qemu emulation");
 				qemu = true;
 			}
 		}
@@ -650,8 +644,7 @@ int rte_pci_read_config(const struct rte_pci_device *device,
 	default:
 		rte_pci_device_name(&device->addr, devname,
 				    RTE_DEV_NAME_MAX_LEN);
-		RTE_LOG(ERR, EAL,
-			"Unknown driver type for %s\n", devname);
+		PCI_LOG(ERR, "Unknown driver type for %s", devname);
 		return -1;
 	}
 }
@@ -674,8 +667,7 @@ int rte_pci_write_config(const struct rte_pci_device *device,
 	default:
 		rte_pci_device_name(&device->addr, devname,
 				    RTE_DEV_NAME_MAX_LEN);
-		RTE_LOG(ERR, EAL,
-			"Unknown driver type for %s\n", devname);
+		PCI_LOG(ERR, "Unknown driver type for %s", devname);
 		return -1;
 	}
 }
@@ -697,8 +689,7 @@ int rte_pci_mmio_read(const struct rte_pci_device *device, int bar,
 	default:
 		rte_pci_device_name(&device->addr, devname,
 				    RTE_DEV_NAME_MAX_LEN);
-		RTE_LOG(ERR, EAL,
-			"Unknown driver type for %s\n", devname);
+		PCI_LOG(ERR, "Unknown driver type for %s", devname);
 		return -1;
 	}
 }
@@ -720,8 +711,7 @@ int rte_pci_mmio_write(const struct rte_pci_device *device, int bar,
 	default:
 		rte_pci_device_name(&device->addr, devname,
 				    RTE_DEV_NAME_MAX_LEN);
-		RTE_LOG(ERR, EAL,
-			"Unknown driver type for %s\n", devname);
+		PCI_LOG(ERR, "Unknown driver type for %s", devname);
 		return -1;
 	}
 }
diff --git a/drivers/bus/pci/linux/pci_uio.c b/drivers/bus/pci/linux/pci_uio.c
index 97d740dfe5..f7d990d33f 100644
--- a/drivers/bus/pci/linux/pci_uio.c
+++ b/drivers/bus/pci/linux/pci_uio.c
@@ -91,15 +91,13 @@ pci_mknod_uio_dev(const char *sysfs_uio_path, unsigned uio_num)
 
 	f = fopen(filename, "r");
 	if (f == NULL) {
-		RTE_LOG(ERR, EAL, "%s(): cannot open sysfs to get major:minor\n",
-			__func__);
+		PCI_LOG(ERR, "%s(): cannot open sysfs to get major:minor", __func__);
 		return -1;
 	}
 
 	ret = fscanf(f, "%u:%u", &major, &minor);
 	if (ret != 2) {
-		RTE_LOG(ERR, EAL, "%s(): cannot parse sysfs to get major:minor\n",
-			__func__);
+		PCI_LOG(ERR, "%s(): cannot parse sysfs to get major:minor", __func__);
 		fclose(f);
 		return -1;
 	}
@@ -110,8 +108,7 @@ pci_mknod_uio_dev(const char *sysfs_uio_path, unsigned uio_num)
 	dev = makedev(major, minor);
 	ret = mknod(filename, S_IFCHR | S_IRUSR | S_IWUSR, dev);
 	if (ret != 0) {
-		RTE_LOG(ERR, EAL, "%s(): mknod() failed %s\n",
-			__func__, strerror(errno));
+		PCI_LOG(ERR, "%s(): mknod() failed %s", __func__, strerror(errno));
 		return -1;
 	}
 
@@ -150,7 +147,7 @@ pci_get_uio_dev(struct rte_pci_device *dev, char *dstbuf,
 		dir = opendir(dirname);
 
 		if (dir == NULL) {
-			RTE_LOG(ERR, EAL, "Cannot opendir %s\n", dirname);
+			PCI_LOG(ERR, "Cannot opendir %s", dirname);
 			return -1;
 		}
 	}
@@ -191,7 +188,7 @@ pci_get_uio_dev(struct rte_pci_device *dev, char *dstbuf,
 	/* create uio device if we've been asked to */
 	if (rte_eal_create_uio_dev() && create &&
 			pci_mknod_uio_dev(dstbuf, uio_num) < 0)
-		RTE_LOG(WARNING, EAL, "Cannot create /dev/uio%u\n", uio_num);
+		PCI_LOG(WARNING, "Cannot create /dev/uio%u", uio_num);
 
 	return uio_num;
 }
@@ -231,8 +228,8 @@ pci_uio_alloc_resource(struct rte_pci_device *dev,
 	/* find uio resource */
 	uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 1);
 	if (uio_num < 0) {
-		RTE_LOG(WARNING, EAL, "  "PCI_PRI_FMT" not managed by UIO driver, "
-				"skipping\n", loc->domain, loc->bus, loc->devid, loc->function);
+		PCI_LOG(WARNING, "  "PCI_PRI_FMT" not managed by UIO driver, skipping",
+			loc->domain, loc->bus, loc->devid, loc->function);
 		return 1;
 	}
 	snprintf(devname, sizeof(devname), "/dev/uio%u", uio_num);
@@ -240,8 +237,7 @@ pci_uio_alloc_resource(struct rte_pci_device *dev,
 	/* save fd if in primary process */
 	fd = open(devname, O_RDWR);
 	if (fd < 0) {
-		RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
-			devname, strerror(errno));
+		PCI_LOG(ERR, "Cannot open %s: %s", devname, strerror(errno));
 		goto error;
 	}
 
@@ -253,8 +249,7 @@ pci_uio_alloc_resource(struct rte_pci_device *dev,
 
 	uio_cfg_fd = open(cfgname, O_RDWR);
 	if (uio_cfg_fd < 0) {
-		RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
-			cfgname, strerror(errno));
+		PCI_LOG(ERR, "Cannot open %s: %s", cfgname, strerror(errno));
 		goto error;
 	}
 
@@ -270,7 +265,7 @@ pci_uio_alloc_resource(struct rte_pci_device *dev,
 
 		/* set bus master that is not done by uio_pci_generic */
 		if (rte_pci_set_bus_master(dev, true)) {
-			RTE_LOG(ERR, EAL, "Cannot set up bus mastering!\n");
+			PCI_LOG(ERR, "Cannot set up bus mastering!");
 			goto error;
 		}
 	}
@@ -278,8 +273,7 @@ pci_uio_alloc_resource(struct rte_pci_device *dev,
 	/* allocate the mapping details for secondary processes*/
 	*uio_res = rte_zmalloc("UIO_RES", sizeof(**uio_res), 0);
 	if (*uio_res == NULL) {
-		RTE_LOG(ERR, EAL,
-			"%s(): cannot store uio mmap details\n", __func__);
+		PCI_LOG(ERR, "%s(): cannot store uio mmap details", __func__);
 		goto error;
 	}
 
@@ -313,8 +307,7 @@ pci_uio_map_resource_by_index(struct rte_pci_device *dev, int res_idx,
 	/* allocate memory to keep path */
 	maps[map_idx].path = rte_malloc(NULL, sizeof(devname), 0);
 	if (maps[map_idx].path == NULL) {
-		RTE_LOG(ERR, EAL, "Cannot allocate memory for path: %s\n",
-				strerror(errno));
+		PCI_LOG(ERR, "Cannot allocate memory for path: %s", strerror(errno));
 		return -1;
 	}
 
@@ -331,8 +324,7 @@ pci_uio_map_resource_by_index(struct rte_pci_device *dev, int res_idx,
 
 		fd = open(devname, O_RDWR);
 		if (fd < 0 && errno != ENOENT) {
-			RTE_LOG(INFO, EAL, "%s cannot be mapped. "
-				"Fall-back to non prefetchable mode.\n",
+			PCI_LOG(INFO, "%s cannot be mapped. Fall-back to non prefetchable mode.",
 				devname);
 		}
 	}
@@ -347,8 +339,7 @@ pci_uio_map_resource_by_index(struct rte_pci_device *dev, int res_idx,
 		/* then try to map resource file */
 		fd = open(devname, O_RDWR);
 		if (fd < 0) {
-			RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
-				devname, strerror(errno));
+			PCI_LOG(ERR, "Cannot open %s: %s", devname, strerror(errno));
 			goto error;
 		}
 	}
@@ -403,14 +394,13 @@ pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 		dev->addr.devid, dev->addr.function);
 	f = fopen(filename, "r");
 	if (f == NULL) {
-		RTE_LOG(ERR, EAL, "%s(): Cannot open sysfs resource: %s\n",
-			__func__, strerror(errno));
+		PCI_LOG(ERR, "%s(): Cannot open sysfs resource: %s", __func__, strerror(errno));
 		return -1;
 	}
 
 	for (i = 0; i < bar + 1; i++) {
 		if (fgets(buf, sizeof(buf), f) == NULL) {
-			RTE_LOG(ERR, EAL, "%s(): Cannot read sysfs resource\n", __func__);
+			PCI_LOG(ERR, "%s(): Cannot read sysfs resource", __func__);
 			goto error;
 		}
 	}
@@ -420,23 +410,23 @@ pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 
 	if (flags & IORESOURCE_IO) {
 		if (rte_eal_iopl_init()) {
-			RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
+			PCI_LOG(ERR, "%s(): insufficient ioport permissions for PCI device %s",
 				__func__, dev->name);
 			goto error;
 		}
 
 		base = (unsigned long)phys_addr;
 		if (base > PIO_MAX) {
-			RTE_LOG(ERR, EAL, "%s(): %08lx too large PIO resource\n", __func__, base);
+			PCI_LOG(ERR, "%s(): %08lx too large PIO resource", __func__, base);
 			goto error;
 		}
 
-		RTE_LOG(DEBUG, EAL, "%s(): PIO BAR %08lx detected\n", __func__, base);
+		PCI_LOG(DEBUG, "%s(): PIO BAR %08lx detected", __func__, base);
 	} else if (flags & IORESOURCE_MEM) {
 		base = (unsigned long)dev->mem_resource[bar].addr;
-		RTE_LOG(DEBUG, EAL, "%s(): MMIO BAR %08lx detected\n", __func__, base);
+		PCI_LOG(DEBUG, "%s(): MMIO BAR %08lx detected", __func__, base);
 	} else {
-		RTE_LOG(ERR, EAL, "%s(): unknown BAR type\n", __func__);
+		PCI_LOG(ERR, "%s(): unknown BAR type", __func__);
 		goto error;
 	}
 
@@ -445,16 +435,14 @@ pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 					RTE_INTR_HANDLE_UNKNOWN) {
 		int uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
 		if (uio_num < 0) {
-			RTE_LOG(ERR, EAL, "cannot open %s: %s\n",
-				dirname, strerror(errno));
+			PCI_LOG(ERR, "cannot open %s: %s", dirname, strerror(errno));
 			goto error;
 		}
 
 		snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num);
 		fd = open(filename, O_RDWR);
 		if (fd < 0) {
-			RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
-				filename, strerror(errno));
+			PCI_LOG(ERR, "Cannot open %s: %s", filename, strerror(errno));
 			goto error;
 		}
 		if (rte_intr_fd_set(dev->intr_handle, fd))
@@ -464,7 +452,7 @@ pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 			goto error;
 	}
 
-	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", base);
+	PCI_LOG(DEBUG, "PCI Port IO found start=0x%lx", base);
 
 	p->base = base;
 	p->len = 0;
@@ -493,13 +481,12 @@ pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 		dev->addr.devid, dev->addr.function);
 	f = fopen(filename, "r");
 	if (f == NULL) {
-		RTE_LOG(ERR, EAL, "Cannot open sysfs resource: %s\n",
-			strerror(errno));
+		PCI_LOG(ERR, "Cannot open sysfs resource: %s", strerror(errno));
 		return -1;
 	}
 	for (i = 0; i < bar + 1; i++) {
 		if (fgets(buf, sizeof(buf), f) == NULL) {
-			RTE_LOG(ERR, EAL, "Cannot read sysfs resource\n");
+			PCI_LOG(ERR, "Cannot read sysfs resource");
 			goto error;
 		}
 	}
@@ -507,7 +494,7 @@ pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 			&end_addr, &flags) < 0)
 		goto error;
 	if ((flags & IORESOURCE_IO) == 0) {
-		RTE_LOG(ERR, EAL, "BAR %d is not an IO resource\n", bar);
+		PCI_LOG(ERR, "BAR %d is not an IO resource", bar);
 		goto error;
 	}
 	snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource%d",
@@ -517,23 +504,21 @@ pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 	/* mmap the pci resource */
 	fd = open(filename, O_RDWR);
 	if (fd < 0) {
-		RTE_LOG(ERR, EAL, "Cannot open %s: %s\n", filename,
-			strerror(errno));
+		PCI_LOG(ERR, "Cannot open %s: %s", filename, strerror(errno));
 		goto error;
 	}
 	addr = mmap(NULL, end_addr + 1, PROT_READ | PROT_WRITE,
 		MAP_SHARED, fd, 0);
 	close(fd);
 	if (addr == MAP_FAILED) {
-		RTE_LOG(ERR, EAL, "Cannot mmap IO port resource: %s\n",
-			strerror(errno));
+		PCI_LOG(ERR, "Cannot mmap IO port resource: %s", strerror(errno));
 		goto error;
 	}
 
 	/* strangely, the base address is mmap addr + phys_addr */
 	p->base = (uintptr_t)addr + phys_addr;
 	p->len = end_addr + 1;
-	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%"PRIx64"\n", p->base);
+	PCI_LOG(DEBUG, "PCI Port IO found start=0x%"PRIx64, p->base);
 	fclose(f);
 
 	return 0;
diff --git a/drivers/bus/pci/linux/pci_vfio.c b/drivers/bus/pci/linux/pci_vfio.c
index 05b03a9667..adc34a5c51 100644
--- a/drivers/bus/pci/linux/pci_vfio.c
+++ b/drivers/bus/pci/linux/pci_vfio.c
@@ -121,15 +121,13 @@ pci_vfio_get_msix_bar(const struct rte_pci_device *dev,
 
 		if (rte_pci_read_config(dev, &reg, sizeof(reg), cap_offset +
 				RTE_PCI_MSIX_TABLE) < 0) {
-			RTE_LOG(ERR, EAL,
-				"Cannot read MSIX table from PCI config space!\n");
+			PCI_LOG(ERR, "Cannot read MSIX table from PCI config space!");
 			return -1;
 		}
 
 		if (rte_pci_read_config(dev, &flags, sizeof(flags), cap_offset +
 				RTE_PCI_MSIX_FLAGS) < 0) {
-			RTE_LOG(ERR, EAL,
-				"Cannot read MSIX flags from PCI config space!\n");
+			PCI_LOG(ERR, "Cannot read MSIX flags from PCI config space!");
 			return -1;
 		}
 
@@ -151,14 +149,14 @@ pci_vfio_enable_bus_memory(struct rte_pci_device *dev, int dev_fd)
 
 	if (pci_vfio_get_region(dev, VFIO_PCI_CONFIG_REGION_INDEX,
 		&size, &offset) != 0) {
-		RTE_LOG(ERR, EAL, "Cannot get offset of CONFIG region.\n");
+		PCI_LOG(ERR, "Cannot get offset of CONFIG region.");
 		return -1;
 	}
 
 	ret = pread(dev_fd, &cmd, sizeof(cmd), offset + RTE_PCI_COMMAND);
 
 	if (ret != sizeof(cmd)) {
-		RTE_LOG(ERR, EAL, "Cannot read command from PCI config space!\n");
+		PCI_LOG(ERR, "Cannot read command from PCI config space!");
 		return -1;
 	}
 
@@ -169,7 +167,7 @@ pci_vfio_enable_bus_memory(struct rte_pci_device *dev, int dev_fd)
 	ret = pwrite(dev_fd, &cmd, sizeof(cmd), offset + RTE_PCI_COMMAND);
 
 	if (ret != sizeof(cmd)) {
-		RTE_LOG(ERR, EAL, "Cannot write command to PCI config space!\n");
+		PCI_LOG(ERR, "Cannot write command to PCI config space!");
 		return -1;
 	}
 
@@ -206,7 +204,7 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
 	case RTE_INTR_MODE_NONE:
 		break;
 	default:
-		RTE_LOG(ERR, EAL, "Unknown default interrupt type!\n");
+		PCI_LOG(ERR, "Unknown default interrupt type!");
 		return -1;
 	}
 
@@ -224,8 +222,8 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
 
 		ret = ioctl(vfio_dev_fd, VFIO_DEVICE_GET_IRQ_INFO, &irq);
 		if (ret < 0) {
-			RTE_LOG(ERR, EAL, "Cannot get VFIO IRQ info, error "
-					"%i (%s)\n", errno, strerror(errno));
+			PCI_LOG(ERR, "Cannot get VFIO IRQ info, error %i (%s)",
+				errno, strerror(errno));
 			return -1;
 		}
 
@@ -233,8 +231,7 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
 		 * specified interrupt type, otherwise continue */
 		if ((irq.flags & VFIO_IRQ_INFO_EVENTFD) == 0) {
 			if (intr_mode != RTE_INTR_MODE_NONE) {
-				RTE_LOG(ERR, EAL,
-					"Interrupt vector does not support eventfd!\n");
+				PCI_LOG(ERR, "Interrupt vector does not support eventfd!");
 				return -1;
 			} else
 				continue;
@@ -251,8 +248,8 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
 		/* set up an eventfd for interrupts */
 		fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
 		if (fd < 0) {
-			RTE_LOG(ERR, EAL, "Cannot set up eventfd, error "
-					"%i (%s)\n", errno, strerror(errno));
+			PCI_LOG(ERR, "Cannot set up eventfd, error %i (%s)",
+				errno, strerror(errno));
 			return -1;
 		}
 
@@ -276,7 +273,7 @@ pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
 						 RTE_INTR_HANDLE_VFIO_LEGACY);
 			break;
 		default:
-			RTE_LOG(ERR, EAL, "Unknown interrupt type!\n");
+			PCI_LOG(ERR, "Unknown interrupt type!");
 			return -1;
 		}
 
@@ -306,8 +303,7 @@ pci_vfio_req_handler(void *param)
 	rte_spinlock_lock(&failure_handle_lock);
 	bus = rte_bus_find_by_device(device);
 	if (bus == NULL) {
-		RTE_LOG(ERR, EAL, "Cannot find bus for device (%s)\n",
-			device->name);
+		PCI_LOG(ERR, "Cannot find bus for device (%s)", device->name);
 		goto handle_end;
 	}
 
@@ -318,9 +314,7 @@ pci_vfio_req_handler(void *param)
 	 */
 	ret = bus->hot_unplug_handler(device);
 	if (ret)
-		RTE_LOG(ERR, EAL,
-			"Can not handle hot-unplug for device (%s)\n",
-			device->name);
+		PCI_LOG(ERR, "Can not handle hot-unplug for device (%s)", device->name);
 handle_end:
 	rte_spinlock_unlock(&failure_handle_lock);
 }
@@ -335,7 +329,7 @@ pci_vfio_enable_notifier(struct rte_pci_device *dev, int vfio_dev_fd)
 	/* set up an eventfd for req notifier */
 	fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
 	if (fd < 0) {
-		RTE_LOG(ERR, EAL, "Cannot set up eventfd, error %i (%s)\n",
+		PCI_LOG(ERR, "Cannot set up eventfd, error %i (%s)",
 			errno, strerror(errno));
 		return -1;
 	}
@@ -353,19 +347,18 @@ pci_vfio_enable_notifier(struct rte_pci_device *dev, int vfio_dev_fd)
 					 pci_vfio_req_handler,
 					 (void *)&dev->device);
 	if (ret) {
-		RTE_LOG(ERR, EAL, "Fail to register req notifier handler.\n");
+		PCI_LOG(ERR, "Fail to register req notifier handler.");
 		goto error;
 	}
 
 	ret = rte_intr_enable(dev->vfio_req_intr_handle);
 	if (ret) {
-		RTE_LOG(ERR, EAL, "Fail to enable req notifier.\n");
+		PCI_LOG(ERR, "Fail to enable req notifier.");
 		ret = rte_intr_callback_unregister(dev->vfio_req_intr_handle,
 						 pci_vfio_req_handler,
 						 (void *)&dev->device);
 		if (ret < 0)
-			RTE_LOG(ERR, EAL,
-				"Fail to unregister req notifier handler.\n");
+			PCI_LOG(ERR, "Fail to unregister req notifier handler.");
 		goto error;
 	}
 
@@ -388,7 +381,7 @@ pci_vfio_disable_notifier(struct rte_pci_device *dev)
 
 	ret = rte_intr_disable(dev->vfio_req_intr_handle);
 	if (ret) {
-		RTE_LOG(ERR, EAL, "fail to disable req notifier.\n");
+		PCI_LOG(ERR, "fail to disable req notifier.");
 		return -1;
 	}
 
@@ -396,8 +389,7 @@ pci_vfio_disable_notifier(struct rte_pci_device *dev)
 					   pci_vfio_req_handler,
 					   (void *)&dev->device);
 	if (ret < 0) {
-		RTE_LOG(ERR, EAL,
-			 "fail to unregister req notifier handler.\n");
+		PCI_LOG(ERR, "fail to unregister req notifier handler.");
 		return -1;
 	}
 
@@ -421,14 +413,14 @@ pci_vfio_is_ioport_bar(const struct rte_pci_device *dev, int vfio_dev_fd,
 
 	if (pci_vfio_get_region(dev, VFIO_PCI_CONFIG_REGION_INDEX,
 		&size, &offset) != 0) {
-		RTE_LOG(ERR, EAL, "Cannot get offset of CONFIG region.\n");
+		PCI_LOG(ERR, "Cannot get offset of CONFIG region.");
 		return -1;
 	}
 
 	ret = pread(vfio_dev_fd, &ioport_bar, sizeof(ioport_bar),
 			  offset + RTE_PCI_BASE_ADDRESS_0 + bar_index * 4);
 	if (ret != sizeof(ioport_bar)) {
-		RTE_LOG(ERR, EAL, "Cannot read command (%x) from config space!\n",
+		PCI_LOG(ERR, "Cannot read command (%x) from config space!",
 			RTE_PCI_BASE_ADDRESS_0 + bar_index*4);
 		return -1;
 	}
@@ -440,17 +432,17 @@ static int
 pci_rte_vfio_setup_device(struct rte_pci_device *dev, int vfio_dev_fd)
 {
 	if (pci_vfio_setup_interrupts(dev, vfio_dev_fd) != 0) {
-		RTE_LOG(ERR, EAL, "Error setting up interrupts!\n");
+		PCI_LOG(ERR, "Error setting up interrupts!");
 		return -1;
 	}
 
 	if (pci_vfio_enable_bus_memory(dev, vfio_dev_fd)) {
-		RTE_LOG(ERR, EAL, "Cannot enable bus memory!\n");
+		PCI_LOG(ERR, "Cannot enable bus memory!");
 		return -1;
 	}
 
 	if (rte_pci_set_bus_master(dev, true)) {
-		RTE_LOG(ERR, EAL, "Cannot set up bus mastering!\n");
+		PCI_LOG(ERR, "Cannot set up bus mastering!");
 		return -1;
 	}
 
@@ -459,8 +451,7 @@ pci_rte_vfio_setup_device(struct rte_pci_device *dev, int vfio_dev_fd)
 	 * then it updates errno as EINVAL.
 	 */
 	if (ioctl(vfio_dev_fd, VFIO_DEVICE_RESET) && errno != EINVAL) {
-		RTE_LOG(ERR, EAL, "Unable to reset device! Error: %d (%s)\n",
-				errno, strerror(errno));
+		PCI_LOG(ERR, "Unable to reset device! Error: %d (%s)", errno, strerror(errno));
 		return -1;
 	}
 
@@ -480,7 +471,7 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
 	struct pci_map *bar = &vfio_res->maps[bar_index];
 
 	if (bar->size == 0) {
-		RTE_LOG(DEBUG, EAL, "Bar size is 0, skip BAR%d\n", bar_index);
+		PCI_LOG(DEBUG, "Bar size is 0, skip BAR%d", bar_index);
 		return 0;
 	}
 
@@ -503,7 +494,7 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
 
 		if (table_start == 0 && table_end >= bar->size) {
 			/* Cannot map this BAR */
-			RTE_LOG(DEBUG, EAL, "Skipping BAR%d\n", bar_index);
+			PCI_LOG(DEBUG, "Skipping BAR%d", bar_index);
 			bar->size = 0;
 			bar->addr = 0;
 			return 0;
@@ -523,10 +514,8 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
 			memreg[1].size = bar->size - table_end;
 		}
 
-		RTE_LOG(DEBUG, EAL,
-			"Trying to map BAR%d that contains the MSI-X "
-			"table. Trying offsets: "
-			"0x%04" PRIx64 ":0x%04zx, 0x%04" PRIx64 ":0x%04zx\n",
+		PCI_LOG(DEBUG, "Trying to map BAR%d that contains the MSI-X table. "
+			"Trying offsets: 0x%04" PRIx64 ":0x%04zx, 0x%04" PRIx64 ":0x%04zx",
 			bar_index,
 			memreg[0].offset, memreg[0].size,
 			memreg[1].offset, memreg[1].size);
@@ -576,14 +565,11 @@ pci_vfio_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
 		if (map_addr == NULL) {
 			munmap(bar_addr, bar->size);
 			bar_addr = MAP_FAILED;
-			RTE_LOG(ERR, EAL, "Failed to map pci BAR%d\n",
-					bar_index);
+			PCI_LOG(ERR, "Failed to map pci BAR%d", bar_index);
 			return -1;
 		}
 	} else {
-		RTE_LOG(ERR, EAL,
-				"Failed to create inaccessible mapping for BAR%d\n",
-				bar_index);
+		PCI_LOG(ERR, "Failed to create inaccessible mapping for BAR%d", bar_index);
 		return -1;
 	}
 
@@ -601,7 +587,7 @@ pci_vfio_sparse_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
 	uint32_t i;
 
 	if (bar->size == 0) {
-		RTE_LOG(DEBUG, EAL, "Bar size is 0, skip BAR%d\n", bar_index);
+		PCI_LOG(DEBUG, "Bar size is 0, skip BAR%d", bar_index);
 		return 0;
 	}
 
@@ -619,15 +605,13 @@ pci_vfio_sparse_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
 					RTE_MAP_FORCE_ADDRESS);
 				if (map_addr == NULL) {
 					munmap(bar_addr, bar->size);
-					RTE_LOG(ERR, EAL, "Failed to map pci BAR%d\n",
-						bar_index);
+					PCI_LOG(ERR, "Failed to map pci BAR%d", bar_index);
 					goto err_map;
 				}
 			}
 		}
 	} else {
-		RTE_LOG(ERR, EAL, "Failed to create inaccessible mapping for BAR%d\n",
-			bar_index);
+		PCI_LOG(ERR, "Failed to create inaccessible mapping for BAR%d", bar_index);
 		goto err_map;
 	}
 
@@ -653,8 +637,7 @@ pci_vfio_get_region_info(int vfio_dev_fd, struct vfio_region_info **info,
 
 	ri = malloc(sizeof(*ri));
 	if (ri == NULL) {
-		RTE_LOG(ERR, EAL,
-			"Cannot allocate memory for VFIO region info\n");
+		PCI_LOG(ERR, "Cannot allocate memory for VFIO region info");
 		return -1;
 	}
 again:
@@ -676,8 +659,7 @@ pci_vfio_get_region_info(int vfio_dev_fd, struct vfio_region_info **info,
 		if (tmp == NULL) {
 			/* realloc failed but the ri is still there */
 			free(ri);
-			RTE_LOG(ERR, EAL,
-				"Cannot reallocate memory for VFIO region info\n");
+			PCI_LOG(ERR, "Cannot reallocate memory for VFIO region info");
 			return -1;
 		}
 		ri = tmp;
@@ -741,7 +723,7 @@ pci_vfio_fill_regions(struct rte_pci_device *dev, int vfio_dev_fd,
 	for (i = 0; i < nb_maps; i++) {
 		ret = pci_vfio_get_region_info(vfio_dev_fd, &reg, i);
 		if (ret < 0) {
-			RTE_LOG(DEBUG, EAL, "%s cannot get device region info error %i (%s)\n",
+			PCI_LOG(DEBUG, "%s cannot get device region info error %i (%s)",
 				dev->name, errno, strerror(errno));
 			return -1;
 		}
@@ -794,8 +776,7 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 	/* allocate vfio_res and get region info */
 	vfio_res = rte_zmalloc("VFIO_RES", sizeof(*vfio_res), 0);
 	if (vfio_res == NULL) {
-		RTE_LOG(ERR, EAL,
-			"Cannot store VFIO mmap details\n");
+		PCI_LOG(ERR, "Cannot store VFIO mmap details");
 		goto err_vfio_dev_fd;
 	}
 	memcpy(&vfio_res->pci_addr, &dev->addr, sizeof(vfio_res->pci_addr));
@@ -810,7 +791,7 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 	ret = pci_vfio_get_region_info(vfio_dev_fd, &reg,
 		VFIO_PCI_CONFIG_REGION_INDEX);
 	if (ret < 0) {
-		RTE_LOG(ERR, EAL, "%s cannot get device region info error %i (%s)\n",
+		PCI_LOG(ERR, "%s cannot get device region info error %i (%s)",
 			dev->name, errno, strerror(errno));
 		goto err_vfio_res;
 	}
@@ -824,8 +805,7 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 	 */
 	ret = pci_vfio_get_msix_bar(dev, &vfio_res->msix_table);
 	if (ret < 0) {
-		RTE_LOG(ERR, EAL, "%s cannot get MSI-X BAR number!\n",
-				pci_addr);
+		PCI_LOG(ERR, "%s cannot get MSI-X BAR number!", pci_addr);
 		goto err_vfio_res;
 	}
 	/* if we found our MSI-X BAR region, check if we can mmap it */
@@ -833,11 +813,11 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 		int ret = pci_vfio_msix_is_mappable(vfio_dev_fd,
 				vfio_res->msix_table.bar_index);
 		if (ret < 0) {
-			RTE_LOG(ERR, EAL, "Couldn't check if MSI-X BAR is mappable\n");
+			PCI_LOG(ERR, "Couldn't check if MSI-X BAR is mappable");
 			goto err_vfio_res;
 		} else if (ret != 0) {
 			/* we can map it, so we don't care where it is */
-			RTE_LOG(DEBUG, EAL, "VFIO reports MSI-X BAR as mappable\n");
+			PCI_LOG(DEBUG, "VFIO reports MSI-X BAR as mappable");
 			vfio_res->msix_table.bar_index = -1;
 		}
 	}
@@ -849,9 +829,8 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 
 		ret = pci_vfio_get_region_info(vfio_dev_fd, &reg, i);
 		if (ret < 0) {
-			RTE_LOG(ERR, EAL,
-				"%s cannot get device region info error "
-				"%i (%s)\n", pci_addr, errno, strerror(errno));
+			PCI_LOG(ERR, "%s cannot get device region info error %i (%s)",
+				pci_addr, errno, strerror(errno));
 			goto err_map;
 		}
 
@@ -864,8 +843,7 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 			free(reg);
 			goto err_map;
 		} else if (ret) {
-			RTE_LOG(INFO, EAL, "Ignore mapping IO port bar(%d)\n",
-					i);
+			PCI_LOG(INFO, "Ignore mapping IO port bar(%d)", i);
 			free(reg);
 			continue;
 		}
@@ -901,8 +879,7 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 				maps[i].areas = rte_zmalloc(NULL,
 					sizeof(*maps[i].areas) * maps[i].nr_areas, 0);
 				if (maps[i].areas == NULL) {
-					RTE_LOG(ERR, EAL,
-						"Cannot alloc memory for sparse map areas\n");
+					PCI_LOG(ERR, "Cannot alloc memory for sparse map areas");
 					goto err_map;
 				}
 				memcpy(maps[i].areas, sparse->areas,
@@ -913,16 +890,16 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 		if (maps[i].nr_areas > 0) {
 			ret = pci_vfio_sparse_mmap_bar(vfio_dev_fd, vfio_res, i, 0);
 			if (ret < 0) {
-				RTE_LOG(ERR, EAL, "%s sparse mapping BAR%i failed: %s\n",
-						pci_addr, i, strerror(errno));
+				PCI_LOG(ERR, "%s sparse mapping BAR%i failed: %s",
+					pci_addr, i, strerror(errno));
 				free(reg);
 				goto err_map;
 			}
 		} else {
 			ret = pci_vfio_mmap_bar(vfio_dev_fd, vfio_res, i, 0);
 			if (ret < 0) {
-				RTE_LOG(ERR, EAL, "%s mapping BAR%i failed: %s\n",
-						pci_addr, i, strerror(errno));
+				PCI_LOG(ERR, "%s mapping BAR%i failed: %s",
+					pci_addr, i, strerror(errno));
 				free(reg);
 				goto err_map;
 			}
@@ -934,13 +911,13 @@ pci_vfio_map_resource_primary(struct rte_pci_device *dev)
 	}
 
 	if (pci_rte_vfio_setup_device(dev, vfio_dev_fd) < 0) {
-		RTE_LOG(ERR, EAL, "%s setup device failed\n", pci_addr);
+		PCI_LOG(ERR, "%s setup device failed", pci_addr);
 		goto err_map;
 	}
 
 #ifdef HAVE_VFIO_DEV_REQ_INTERFACE
 	if (pci_vfio_enable_notifier(dev, vfio_dev_fd) != 0) {
-		RTE_LOG(ERR, EAL, "Error setting up notifier!\n");
+		PCI_LOG(ERR, "Error setting up notifier!");
 		goto err_map;
 	}
 
@@ -997,8 +974,7 @@ pci_vfio_map_resource_secondary(struct rte_pci_device *dev)
 	}
 	/* if we haven't found our tailq entry, something's wrong */
 	if (vfio_res == NULL) {
-		RTE_LOG(ERR, EAL, "%s cannot find TAILQ entry for PCI device!\n",
-				pci_addr);
+		PCI_LOG(ERR, "%s cannot find TAILQ entry for PCI device!", pci_addr);
 		return -1;
 	}
 
@@ -1018,15 +994,15 @@ pci_vfio_map_resource_secondary(struct rte_pci_device *dev)
 		if (maps[i].nr_areas > 0) {
 			ret = pci_vfio_sparse_mmap_bar(vfio_dev_fd, vfio_res, i, MAP_FIXED);
 			if (ret < 0) {
-				RTE_LOG(ERR, EAL, "%s sparse mapping BAR%i failed: %s\n",
-						pci_addr, i, strerror(errno));
+				PCI_LOG(ERR, "%s sparse mapping BAR%i failed: %s",
+					pci_addr, i, strerror(errno));
 				goto err_vfio_dev_fd;
 			}
 		} else {
 			ret = pci_vfio_mmap_bar(vfio_dev_fd, vfio_res, i, MAP_FIXED);
 			if (ret < 0) {
-				RTE_LOG(ERR, EAL, "%s mapping BAR%i failed: %s\n",
-						pci_addr, i, strerror(errno));
+				PCI_LOG(ERR, "%s mapping BAR%i failed: %s",
+					pci_addr, i, strerror(errno));
 				goto err_vfio_dev_fd;
 			}
 		}
@@ -1085,8 +1061,7 @@ find_and_unmap_vfio_resource(struct mapped_pci_res_list *vfio_res_list,
 	if (vfio_res == NULL)
 		return vfio_res;
 
-	RTE_LOG(INFO, EAL, "Releasing PCI mapped resource for %s\n",
-		pci_addr);
+	PCI_LOG(INFO, "Releasing PCI mapped resource for %s", pci_addr);
 
 	maps = vfio_res->maps;
 	for (i = 0; i < vfio_res->nb_maps; i++) {
@@ -1096,7 +1071,7 @@ find_and_unmap_vfio_resource(struct mapped_pci_res_list *vfio_res_list,
 		 * when mapping. Just using current maps array is enough
 		 */
 		if (maps[i].addr) {
-			RTE_LOG(INFO, EAL, "Calling pci_unmap_resource for %s at %p\n",
+			PCI_LOG(INFO, "Calling pci_unmap_resource for %s at %p",
 				pci_addr, maps[i].addr);
 			pci_unmap_resource(maps[i].addr, maps[i].size);
 		}
@@ -1124,7 +1099,7 @@ pci_vfio_unmap_resource_primary(struct rte_pci_device *dev)
 #ifdef HAVE_VFIO_DEV_REQ_INTERFACE
 	ret = pci_vfio_disable_notifier(dev);
 	if (ret) {
-		RTE_LOG(ERR, EAL, "fail to disable req notifier.\n");
+		PCI_LOG(ERR, "fail to disable req notifier.");
 		return -1;
 	}
 
@@ -1133,8 +1108,7 @@ pci_vfio_unmap_resource_primary(struct rte_pci_device *dev)
 		return -1;
 
 	if (close(rte_intr_fd_get(dev->intr_handle)) < 0) {
-		RTE_LOG(INFO, EAL, "Error when closing eventfd file descriptor for %s\n",
-			pci_addr);
+		PCI_LOG(INFO, "Error when closing eventfd file descriptor for %s", pci_addr);
 		return -1;
 	}
 
@@ -1143,15 +1117,14 @@ pci_vfio_unmap_resource_primary(struct rte_pci_device *dev)
 		return -1;
 
 	if (rte_pci_set_bus_master(dev, false)) {
-		RTE_LOG(ERR, EAL, "%s cannot unset bus mastering for PCI device!\n",
-				pci_addr);
+		PCI_LOG(ERR, "%s cannot unset bus mastering for PCI device!", pci_addr);
 		return -1;
 	}
 
 	ret = rte_vfio_release_device(rte_pci_get_sysfs_path(), pci_addr,
 				      vfio_dev_fd);
 	if (ret < 0) {
-		RTE_LOG(ERR, EAL, "Cannot release VFIO device\n");
+		PCI_LOG(ERR, "Cannot release VFIO device");
 		return ret;
 	}
 
@@ -1161,8 +1134,7 @@ pci_vfio_unmap_resource_primary(struct rte_pci_device *dev)
 
 	/* if we haven't found our tailq entry, something's wrong */
 	if (vfio_res == NULL) {
-		RTE_LOG(ERR, EAL, "%s cannot find TAILQ entry for PCI device!\n",
-				pci_addr);
+		PCI_LOG(ERR, "%s cannot find TAILQ entry for PCI device!", pci_addr);
 		return -1;
 	}
 
@@ -1191,7 +1163,7 @@ pci_vfio_unmap_resource_secondary(struct rte_pci_device *dev)
 	ret = rte_vfio_release_device(rte_pci_get_sysfs_path(), pci_addr,
 				      vfio_dev_fd);
 	if (ret < 0) {
-		RTE_LOG(ERR, EAL, "Cannot release VFIO device\n");
+		PCI_LOG(ERR, "Cannot release VFIO device");
 		return ret;
 	}
 
@@ -1201,8 +1173,7 @@ pci_vfio_unmap_resource_secondary(struct rte_pci_device *dev)
 
 	/* if we haven't found our tailq entry, something's wrong */
 	if (vfio_res == NULL) {
-		RTE_LOG(ERR, EAL, "%s cannot find TAILQ entry for PCI device!\n",
-				pci_addr);
+		PCI_LOG(ERR, "%s cannot find TAILQ entry for PCI device!", pci_addr);
 		return -1;
 	}
 
@@ -1226,7 +1197,7 @@ pci_vfio_ioport_map(struct rte_pci_device *dev, int bar,
 
 	if (bar < VFIO_PCI_BAR0_REGION_INDEX ||
 	    bar > VFIO_PCI_BAR5_REGION_INDEX) {
-		RTE_LOG(ERR, EAL, "invalid bar (%d)!\n", bar);
+		PCI_LOG(ERR, "invalid bar (%d)!", bar);
 		return -1;
 	}
 
@@ -1257,7 +1228,7 @@ pci_vfio_ioport_map(struct rte_pci_device *dev, int bar,
 	}
 
 	if (pci_vfio_get_region(dev, bar, &size, &offset) != 0) {
-		RTE_LOG(ERR, EAL, "Cannot get offset of region %d.\n", bar);
+		PCI_LOG(ERR, "Cannot get offset of region %d.", bar);
 		return -1;
 	}
 
@@ -1278,8 +1249,7 @@ pci_vfio_ioport_read(struct rte_pci_ioport *p,
 
 	if (pread(vfio_dev_fd, data,
 		    len, p->base + offset) <= 0)
-		RTE_LOG(ERR, EAL,
-			"Can't read from PCI bar (%" PRIu64 ") : offset (%x)\n",
+		PCI_LOG(ERR, "Can't read from PCI bar (%" PRIu64 ") : offset (%x)",
 			VFIO_GET_REGION_IDX(p->base), (int)offset);
 }
 
@@ -1295,8 +1265,7 @@ pci_vfio_ioport_write(struct rte_pci_ioport *p,
 
 	if (pwrite(vfio_dev_fd, data,
 		     len, p->base + offset) <= 0)
-		RTE_LOG(ERR, EAL,
-			"Can't write to PCI bar (%" PRIu64 ") : offset (%x)\n",
+		PCI_LOG(ERR, "Can't write to PCI bar (%" PRIu64 ") : offset (%x)",
 			VFIO_GET_REGION_IDX(p->base), (int)offset);
 }
 
diff --git a/drivers/bus/pci/pci_common.c b/drivers/bus/pci/pci_common.c
index 889a48d2af..1173f0887c 100644
--- a/drivers/bus/pci/pci_common.c
+++ b/drivers/bus/pci/pci_common.c
@@ -141,13 +141,12 @@ pci_map_resource(void *requested_addr, int fd, off_t offset, size_t size,
 		RTE_PROT_READ | RTE_PROT_WRITE,
 		RTE_MAP_SHARED | additional_flags, fd, offset);
 	if (mapaddr == NULL) {
-		RTE_LOG(ERR, EAL,
-			"%s(): cannot map resource(%d, %p, 0x%zx, 0x%llx): %s (%p)\n",
+		PCI_LOG(ERR, "%s(): cannot map resource(%d, %p, 0x%zx, 0x%llx): %s (%p)",
 			__func__, fd, requested_addr, size,
 			(unsigned long long)offset,
 			rte_strerror(rte_errno), mapaddr);
 	} else
-		RTE_LOG(DEBUG, EAL, "  PCI memory mapped at %p\n", mapaddr);
+		PCI_LOG(DEBUG, "  PCI memory mapped at %p", mapaddr);
 
 	return mapaddr;
 }
@@ -161,12 +160,11 @@ pci_unmap_resource(void *requested_addr, size_t size)
 
 	/* Unmap the PCI memory resource of device */
 	if (rte_mem_unmap(requested_addr, size)) {
-		RTE_LOG(ERR, EAL, "%s(): cannot mem unmap(%p, %#zx): %s\n",
+		PCI_LOG(ERR, "%s(): cannot mem unmap(%p, %#zx): %s",
 			__func__, requested_addr, size,
 			rte_strerror(rte_errno));
 	} else
-		RTE_LOG(DEBUG, EAL, "  PCI memory unmapped at %p\n",
-				requested_addr);
+		PCI_LOG(DEBUG, "  PCI memory unmapped at %p", requested_addr);
 }
 /*
  * Match the PCI Driver and Device using the ID Table
@@ -226,28 +224,27 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
 		/* Match of device and driver failed */
 		return 1;
 
-	RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
-			loc->domain, loc->bus, loc->devid, loc->function,
-			dev->device.numa_node);
+	PCI_LOG(DEBUG, "PCI device "PCI_PRI_FMT" on NUMA socket %i",
+		loc->domain, loc->bus, loc->devid, loc->function,
+		dev->device.numa_node);
 
 	/* no initialization when marked as blocked, return without error */
 	if (dev->device.devargs != NULL &&
 		dev->device.devargs->policy == RTE_DEV_BLOCKED) {
-		RTE_LOG(INFO, EAL, "  Device is blocked, not initializing\n");
+		PCI_LOG(INFO, "  Device is blocked, not initializing");
 		return 1;
 	}
 
 	if (dev->device.numa_node < 0 && rte_socket_count() > 1)
-		RTE_LOG(INFO, EAL, "Device %s is not NUMA-aware\n", dev->name);
+		PCI_LOG(INFO, "Device %s is not NUMA-aware", dev->name);
 
 	already_probed = rte_dev_is_probed(&dev->device);
 	if (already_probed && !(dr->drv_flags & RTE_PCI_DRV_PROBE_AGAIN)) {
-		RTE_LOG(DEBUG, EAL, "Device %s is already probed\n",
-				dev->device.name);
+		PCI_LOG(DEBUG, "Device %s is already probed", dev->device.name);
 		return -EEXIST;
 	}
 
-	RTE_LOG(DEBUG, EAL, "  probe driver: %x:%x %s\n", dev->id.vendor_id,
+	PCI_LOG(DEBUG, "  probe driver: %x:%x %s", dev->id.vendor_id,
 		dev->id.device_id, dr->driver.name);
 
 	if (!already_probed) {
@@ -258,7 +255,7 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
 		iova_mode = rte_eal_iova_mode();
 		if (dev_iova_mode != RTE_IOVA_DC &&
 		    dev_iova_mode != iova_mode) {
-			RTE_LOG(ERR, EAL, "  Expecting '%s' IOVA mode but current mode is '%s', not initializing\n",
+			PCI_LOG(ERR, "  Expecting '%s' IOVA mode but current mode is '%s', not initializing",
 				dev_iova_mode == RTE_IOVA_PA ? "PA" : "VA",
 				iova_mode == RTE_IOVA_PA ? "PA" : "VA");
 			return -EINVAL;
@@ -268,8 +265,7 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
 		dev->intr_handle =
 			rte_intr_instance_alloc(RTE_INTR_INSTANCE_F_PRIVATE);
 		if (dev->intr_handle == NULL) {
-			RTE_LOG(ERR, EAL,
-				"Failed to create interrupt instance for %s\n",
+			PCI_LOG(ERR, "Failed to create interrupt instance for %s",
 				dev->device.name);
 			return -ENOMEM;
 		}
@@ -279,8 +275,7 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
 		if (dev->vfio_req_intr_handle == NULL) {
 			rte_intr_instance_free(dev->intr_handle);
 			dev->intr_handle = NULL;
-			RTE_LOG(ERR, EAL,
-				"Failed to create vfio req interrupt instance for %s\n",
+			PCI_LOG(ERR, "Failed to create vfio req interrupt instance for %s",
 				dev->device.name);
 			return -ENOMEM;
 		}
@@ -304,10 +299,10 @@ rte_pci_probe_one_driver(struct rte_pci_driver *dr,
 		}
 	}
 
-	RTE_LOG(INFO, EAL, "Probe PCI driver: %s (%x:%04x) device: "PCI_PRI_FMT" (socket %i)\n",
-			dr->driver.name, dev->id.vendor_id, dev->id.device_id,
-			loc->domain, loc->bus, loc->devid, loc->function,
-			dev->device.numa_node);
+	PCI_LOG(INFO, "Probe PCI driver: %s (%x:%04x) device: "PCI_PRI_FMT" (socket %i)",
+		dr->driver.name, dev->id.vendor_id, dev->id.device_id,
+		loc->domain, loc->bus, loc->devid, loc->function,
+		dev->device.numa_node);
 	/* call the driver probe() function */
 	ret = dr->probe(dr, dev);
 	if (already_probed)
@@ -349,12 +344,12 @@ rte_pci_detach_dev(struct rte_pci_device *dev)
 	dr = dev->driver;
 	loc = &dev->addr;
 
-	RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
-			loc->domain, loc->bus, loc->devid,
-			loc->function, dev->device.numa_node);
+	PCI_LOG(DEBUG, "PCI device "PCI_PRI_FMT" on NUMA socket %i",
+		loc->domain, loc->bus, loc->devid,
+		loc->function, dev->device.numa_node);
 
-	RTE_LOG(DEBUG, EAL, "  remove driver: %x:%x %s\n", dev->id.vendor_id,
-			dev->id.device_id, dr->driver.name);
+	PCI_LOG(DEBUG, "  remove driver: %x:%x %s", dev->id.vendor_id,
+		dev->id.device_id, dr->driver.name);
 
 	if (dr->remove) {
 		ret = dr->remove(dev);
@@ -423,8 +418,7 @@ pci_probe(void)
 		ret = pci_probe_all_drivers(dev);
 		if (ret < 0) {
 			if (ret != -EEXIST) {
-				RTE_LOG(ERR, EAL, "Requested device "
-					PCI_PRI_FMT " cannot be used\n",
+				PCI_LOG(ERR, "Requested device " PCI_PRI_FMT " cannot be used",
 					dev->addr.domain, dev->addr.bus,
 					dev->addr.devid, dev->addr.function);
 				rte_errno = errno;
@@ -592,8 +586,8 @@ pci_find_device_by_addr(const void *failure_addr)
 			len = pdev->mem_resource[i].len;
 			end = start + len;
 			if (check_point >= start && check_point < end) {
-				RTE_LOG(DEBUG, EAL, "Failure address %16.16"
-					PRIx64" belongs to device %s!\n",
+				PCI_LOG(DEBUG, "Failure address %16.16"
+					PRIx64" belongs to device %s!",
 					check_point, pdev->device.name);
 				return pdev;
 			}
@@ -632,8 +626,7 @@ pci_hot_unplug_handler(struct rte_device *dev)
 		ret = pci_uio_remap_resource(pdev);
 		break;
 	default:
-		RTE_LOG(DEBUG, EAL,
-			"Not managed by a supported kernel driver, skipped\n");
+		PCI_LOG(DEBUG, "Not managed by a supported kernel driver, skipped");
 		ret = -1;
 		break;
 	}
@@ -655,8 +648,7 @@ pci_sigbus_handler(const void *failure_addr)
 		/* The sigbus error is caused of hot-unplug. */
 		ret = pci_hot_unplug_handler(&pdev->device);
 		if (ret) {
-			RTE_LOG(ERR, EAL,
-				"Failed to handle hot-unplug for device %s",
+			PCI_LOG(ERR, "Failed to handle hot-unplug for device %s",
 				pdev->name);
 			ret = -1;
 		}
@@ -780,8 +772,7 @@ rte_pci_get_iommu_class(void)
 				continue;
 
 			dev_iova_mode = pci_device_iova_mode(drv, dev);
-			RTE_LOG(DEBUG, EAL, "PCI driver %s for device "
-				PCI_PRI_FMT " wants IOVA as '%s'\n",
+			PCI_LOG(DEBUG, "PCI driver %s for device "PCI_PRI_FMT" wants IOVA as '%s'",
 				drv->driver.name,
 				dev->addr.domain, dev->addr.bus,
 				dev->addr.devid, dev->addr.function,
@@ -796,8 +787,8 @@ rte_pci_get_iommu_class(void)
 	if (iommu_no_va == 1) {
 		iova_mode = RTE_IOVA_PA;
 		if (devices_want_va) {
-			RTE_LOG(WARNING, EAL, "Some devices want 'VA' but IOMMU does not support 'VA'.\n");
-			RTE_LOG(WARNING, EAL, "The devices that want 'VA' won't initialize.\n");
+			PCI_LOG(WARNING, "Some devices want 'VA' but IOMMU does not support 'VA'.");
+			PCI_LOG(WARNING, "The devices that want 'VA' won't initialize.");
 		}
 	} else if (devices_want_va && !devices_want_pa) {
 		iova_mode = RTE_IOVA_VA;
@@ -806,8 +797,8 @@ rte_pci_get_iommu_class(void)
 	} else {
 		iova_mode = RTE_IOVA_DC;
 		if (devices_want_va) {
-			RTE_LOG(WARNING, EAL, "Some devices want 'VA' but forcing 'DC' because other devices want 'PA'.\n");
-			RTE_LOG(WARNING, EAL, "Depending on the final decision by the EAL, not all devices may be able to initialize.\n");
+			PCI_LOG(WARNING, "Some devices want 'VA' but forcing 'DC' because other devices want 'PA'.");
+			PCI_LOG(WARNING, "Depending on the final decision by the EAL, not all devices may be able to initialize.");
 		}
 	}
 	return iova_mode;
@@ -878,7 +869,7 @@ rte_pci_find_ext_capability(const struct rte_pci_device *dev, uint32_t cap)
 	ttl = (RTE_PCI_CFG_SPACE_EXP_SIZE - RTE_PCI_CFG_SPACE_SIZE) / 8;
 
 	if (rte_pci_read_config(dev, &header, 4, offset) < 0) {
-		RTE_LOG(ERR, EAL, "error in reading extended capabilities\n");
+		PCI_LOG(ERR, "error in reading extended capabilities");
 		return -1;
 	}
 
@@ -899,8 +890,7 @@ rte_pci_find_ext_capability(const struct rte_pci_device *dev, uint32_t cap)
 			break;
 
 		if (rte_pci_read_config(dev, &header, 4, offset) < 0) {
-			RTE_LOG(ERR, EAL,
-				"error in reading extended capabilities\n");
+			PCI_LOG(ERR, "error in reading extended capabilities");
 			return -1;
 		}
 
@@ -917,7 +907,7 @@ rte_pci_set_bus_master(const struct rte_pci_device *dev, bool enable)
 
 	if (rte_pci_read_config(dev, &old_cmd, sizeof(old_cmd),
 				RTE_PCI_COMMAND) < 0) {
-		RTE_LOG(ERR, EAL, "error in reading PCI command register\n");
+		PCI_LOG(ERR, "error in reading PCI command register");
 		return -1;
 	}
 
@@ -931,7 +921,7 @@ rte_pci_set_bus_master(const struct rte_pci_device *dev, bool enable)
 
 	if (rte_pci_write_config(dev, &cmd, sizeof(cmd),
 				 RTE_PCI_COMMAND) < 0) {
-		RTE_LOG(ERR, EAL, "error in writing PCI command register\n");
+		PCI_LOG(ERR, "error in writing PCI command register");
 		return -1;
 	}
 
@@ -969,3 +959,4 @@ struct rte_pci_bus rte_pci_bus = {
 };
 
 RTE_REGISTER_BUS(pci, rte_pci_bus.bus);
+RTE_LOG_REGISTER_DEFAULT(pci_bus_logtype, NOTICE);
diff --git a/drivers/bus/pci/pci_common_uio.c b/drivers/bus/pci/pci_common_uio.c
index 76c661f054..ff1b02b6bd 100644
--- a/drivers/bus/pci/pci_common_uio.c
+++ b/drivers/bus/pci/pci_common_uio.c
@@ -43,7 +43,7 @@ pci_uio_map_secondary(struct rte_pci_device *dev)
 			 */
 			fd = open(uio_res->maps[i].path, O_RDWR);
 			if (fd < 0) {
-				RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
+				PCI_LOG(ERR, "Cannot open %s: %s",
 					uio_res->maps[i].path, strerror(errno));
 				return -1;
 			}
@@ -55,8 +55,7 @@ pci_uio_map_secondary(struct rte_pci_device *dev)
 			/* fd is not needed in secondary process, close it */
 			close(fd);
 			if (mapaddr != uio_res->maps[i].addr) {
-				RTE_LOG(ERR, EAL,
-					"Cannot mmap device resource file %s to address: %p\n",
+				PCI_LOG(ERR, "Cannot mmap device resource file %s to address: %p",
 					uio_res->maps[i].path,
 					uio_res->maps[i].addr);
 				if (mapaddr != NULL) {
@@ -76,7 +75,7 @@ pci_uio_map_secondary(struct rte_pci_device *dev)
 		return 0;
 	}
 
-	RTE_LOG(ERR, EAL, "Cannot find resource for device\n");
+	PCI_LOG(ERR, "Cannot find resource for device");
 	return 1;
 }
 
@@ -171,14 +170,10 @@ pci_uio_remap_resource(struct rte_pci_device *dev)
 				PROT_READ | PROT_WRITE,
 				MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
 		if (map_address == MAP_FAILED) {
-			RTE_LOG(ERR, EAL,
-				"Cannot remap resource for device %s\n",
-				dev->name);
+			PCI_LOG(ERR, "Cannot remap resource for device %s", dev->name);
 			return -1;
 		}
-		RTE_LOG(INFO, EAL,
-			"Successful remap resource for device %s\n",
-			dev->name);
+		PCI_LOG(INFO, "Successful remap resource for device %s", dev->name);
 	}
 
 	return 0;
diff --git a/drivers/bus/pci/pci_params.c b/drivers/bus/pci/pci_params.c
index d24cc201b8..087ec38bb9 100644
--- a/drivers/bus/pci/pci_params.c
+++ b/drivers/bus/pci/pci_params.c
@@ -70,7 +70,7 @@ rte_pci_dev_iterate(const void *start,
 	if (str != NULL) {
 		kvargs = rte_kvargs_parse(str, pci_params_keys);
 		if (kvargs == NULL) {
-			RTE_LOG(ERR, EAL, "cannot parse argument list\n");
+			PCI_LOG(ERR, "cannot parse argument list");
 			rte_errno = EINVAL;
 			return NULL;
 		}
@@ -94,22 +94,21 @@ rte_pci_devargs_parse(struct rte_devargs *da)
 
 	kvargs = rte_kvargs_parse(da->bus_str, NULL);
 	if (kvargs == NULL) {
-		RTE_LOG(ERR, EAL, "cannot parse argument list: %s\n",
-			da->bus_str);
+		PCI_LOG(ERR, "cannot parse argument list: %s", da->bus_str);
 		ret = -ENODEV;
 		goto out;
 	}
 
 	addr_str = rte_kvargs_get(kvargs, pci_params_keys[RTE_PCI_PARAM_ADDR]);
 	if (addr_str == NULL) {
-		RTE_LOG(DEBUG, EAL, "No PCI address specified using '%s=<id>' in: %s\n",
+		PCI_LOG(DEBUG, "No PCI address specified using '%s=<id>' in: %s",
 			pci_params_keys[RTE_PCI_PARAM_ADDR], da->bus_str);
 		goto out;
 	}
 
 	ret = rte_pci_addr_parse(addr_str, &addr);
 	if (ret != 0) {
-		RTE_LOG(ERR, EAL, "PCI address invalid: %s\n", da->bus_str);
+		PCI_LOG(ERR, "PCI address invalid: %s", da->bus_str);
 		ret = -EINVAL;
 		goto out;
 	}
diff --git a/drivers/bus/pci/private.h b/drivers/bus/pci/private.h
index 8b0ce73533..38109844b9 100644
--- a/drivers/bus/pci/private.h
+++ b/drivers/bus/pci/private.h
@@ -10,9 +10,15 @@
 
 #include <bus_driver.h>
 #include <bus_pci_driver.h>
+#include <rte_log.h>
 #include <rte_os_shim.h>
 #include <rte_pci.h>
 
+extern int pci_bus_logtype;
+#define RTE_LOGTYPE_PCI_BUS pci_bus_logtype
+#define PCI_LOG(level, ...) \
+	RTE_LOG_LINE(level, PCI_BUS, "" __VA_ARGS__)
+
 #define RTE_MAX_PCI_REGIONS    9
 
 /*
diff --git a/drivers/bus/pci/windows/pci.c b/drivers/bus/pci/windows/pci.c
index 45a12bcb52..36e6f89093 100644
--- a/drivers/bus/pci/windows/pci.c
+++ b/drivers/bus/pci/windows/pci.c
@@ -246,8 +246,7 @@ get_device_resource_info(HDEVINFO dev_info,
 		/* get device info from NetUIO kernel driver */
 		ret = get_netuio_device_info(dev_info, dev_info_data, dev);
 		if (ret != 0) {
-			RTE_LOG(DEBUG, EAL,
-				"Could not retrieve device info for PCI device "
+			PCI_LOG(DEBUG, "Could not retrieve device info for PCI device "
 				PCI_PRI_FMT,
 				dev->addr.domain, dev->addr.bus,
 				dev->addr.devid, dev->addr.function);
@@ -256,9 +255,7 @@ get_device_resource_info(HDEVINFO dev_info,
 		break;
 	default:
 		/* kernel driver type is unsupported */
-		RTE_LOG(DEBUG, EAL,
-			"Kernel driver type for PCI device " PCI_PRI_FMT ","
-			" is unsupported",
+		PCI_LOG(DEBUG, "Kernel driver type for PCI device " PCI_PRI_FMT ", is unsupported",
 			dev->addr.domain, dev->addr.bus,
 			dev->addr.devid, dev->addr.function);
 		return -1;
@@ -397,7 +394,7 @@ pci_scan_one(HDEVINFO dev_info, PSP_DEVINFO_DATA device_info_data)
 
 	pdev = malloc(sizeof(*pdev));
 	if (pdev == NULL) {
-		RTE_LOG(ERR, EAL, "Cannot allocate memory for internal pci device\n");
+		PCI_LOG(ERR, "Cannot allocate memory for internal pci device");
 		goto end;
 	}
 
@@ -470,7 +467,7 @@ rte_pci_scan(void)
 		DIGCF_PRESENT | DIGCF_ALLCLASSES);
 	if (dev_info == INVALID_HANDLE_VALUE) {
 		RTE_LOG_WIN32_ERR("SetupDiGetClassDevs(pci_scan)");
-		RTE_LOG(ERR, EAL, "Unable to enumerate PCI devices.\n");
+		PCI_LOG(ERR, "Unable to enumerate PCI devices.");
 		goto end;
 	}
 
@@ -495,7 +492,7 @@ rte_pci_scan(void)
 		device_info_data.cbSize = sizeof(SP_DEVINFO_DATA);
 	}
 
-	RTE_LOG(DEBUG, EAL, "PCI scan found %lu devices\n", found_device);
+	PCI_LOG(DEBUG, "PCI scan found %lu devices", found_device);
 	ret = 0;
 end:
 	if (dev_info != INVALID_HANDLE_VALUE)
diff --git a/drivers/bus/pci/windows/pci_netuio.c b/drivers/bus/pci/windows/pci_netuio.c
index 314bbcf547..346b2f4c0a 100644
--- a/drivers/bus/pci/windows/pci_netuio.c
+++ b/drivers/bus/pci/windows/pci_netuio.c
@@ -96,7 +96,7 @@ get_netuio_device_interface_detail(HDEVINFO di_set)
 
 	dev_ifx_detail = malloc(required_size);
 	if (!dev_ifx_detail) {
-		RTE_LOG(ERR, EAL, "Could not allocate memory for dev interface.\n");
+		PCI_LOG(ERR, "Could not allocate memory for dev interface.");
 		goto end;
 	}
 	dev_ifx_detail->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA);
@@ -148,15 +148,14 @@ get_netuio_device_info(HDEVINFO dev_info, PSP_DEVINFO_DATA dev_info_data,
 		NULL);
 	if (netuio == INVALID_HANDLE_VALUE) {
 		RTE_LOG_WIN32_ERR("CreateFile");
-		RTE_LOG(ERR, EAL, "Unable to open driver file \"%s\".\n",
-			dev_ifx_detail->DevicePath);
+		PCI_LOG(ERR, "Unable to open driver file \"%s\".", dev_ifx_detail->DevicePath);
 		goto end;
 	}
 
 	/* send ioctl to retrieve device information */
 	if (send_ioctl(netuio, IOCTL_NETUIO_MAP_HW_INTO_USERSPACE, NULL, 0,
 		&hw_info, sizeof(hw_info)) != ERROR_SUCCESS) {
-		RTE_LOG(ERR, EAL, "Unable to send ioctl to driver.\n");
+		PCI_LOG(ERR, "Unable to send ioctl to driver.");
 		goto end;
 	}
 
-- 
2.45.2

[PATCH 6/6] crypto/ccp: use a dynamic logtype

[David Marchand]

Register a logtype for this bus driver and stop logging as CRYPTODEV.

Signed-off-by: David Marchand <david.marchand@redhat.com>
---
 drivers/crypto/ccp/ccp_crypto.c      |  4 ++--
 drivers/crypto/ccp/ccp_pmd_private.h | 15 +++++----------
 drivers/crypto/ccp/rte_ccp_pmd.c     |  2 ++
 3 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/ccp/ccp_crypto.c b/drivers/crypto/ccp/ccp_crypto.c
index 4b84b3303e..5899d83bae 100644
--- a/drivers/crypto/ccp/ccp_crypto.c
+++ b/drivers/crypto/ccp/ccp_crypto.c
@@ -1829,7 +1829,7 @@ ccp_perform_sha3_hmac(struct rte_crypto_op *op,
 	append_ptr = (uint8_t *)rte_pktmbuf_append(op->sym->m_src,
 						session->auth.ctx_len);
 	if (!append_ptr) {
-		CCP_LOG_ERR("CCP MBUF append failed\n");
+		CCP_LOG_ERR("CCP MBUF append failed");
 		return -1;
 	}
 	dest_addr = (phys_addr_t)rte_mem_virt2iova((void *)append_ptr);
@@ -1966,7 +1966,7 @@ ccp_perform_sha3(struct rte_crypto_op *op,
 	append_ptr = (uint8_t *)rte_pktmbuf_append(op->sym->m_src,
 						session->auth.ctx_len);
 	if (!append_ptr) {
-		CCP_LOG_ERR("CCP MBUF append failed\n");
+		CCP_LOG_ERR("CCP MBUF append failed");
 		return -1;
 	}
 	dest_addr = (phys_addr_t)rte_mem_virt2iova((void *)append_ptr);
diff --git a/drivers/crypto/ccp/ccp_pmd_private.h b/drivers/crypto/ccp/ccp_pmd_private.h
index 390442ff19..94c8fec46d 100644
--- a/drivers/crypto/ccp/ccp_pmd_private.h
+++ b/drivers/crypto/ccp/ccp_pmd_private.h
@@ -8,23 +8,18 @@
 #include <rte_cryptodev.h>
 #include "ccp_crypto.h"
 
-#define CRYPTODEV_NAME_CCP_PMD crypto_ccp
+extern int crypto_ccp_logtype;
+#define RTE_LOGTYPE_CRYPTO_CCP crypto_ccp_logtype
 
 #define CCP_LOG_ERR(fmt, args...) \
-	RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n",  \
-			RTE_STR(CRYPTODEV_NAME_CCP_PMD), \
-			__func__, __LINE__, ## args)
+	RTE_LOG_LINE(ERR, CRYPTO_CCP, "%s() line %u: " fmt, __func__, __LINE__, ## args)
 
 #ifdef RTE_LIBRTE_CCP_DEBUG
 #define CCP_LOG_INFO(fmt, args...) \
-	RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
-			RTE_STR(CRYPTODEV_NAME_CCP_PMD), \
-			__func__, __LINE__, ## args)
+	RTE_LOG_LINE(INFO, CRYPTO_CCP, "%s() line %u: " fmt, __func__, __LINE__, ## args)
 
 #define CCP_LOG_DBG(fmt, args...) \
-	RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
-			RTE_STR(CRYPTODEV_NAME_CCP_PMD), \
-			__func__, __LINE__, ## args)
+	RTE_LOG_LINE(DEBUG, CRYPTO_CCP, "%s() line %u: " fmt, __func__, __LINE__, ## args)
 #else
 #define CCP_LOG_INFO(fmt, args...)
 #define CCP_LOG_DBG(fmt, args...)
diff --git a/drivers/crypto/ccp/rte_ccp_pmd.c b/drivers/crypto/ccp/rte_ccp_pmd.c
index 869399597e..022c1df182 100644
--- a/drivers/crypto/ccp/rte_ccp_pmd.c
+++ b/drivers/crypto/ccp/rte_ccp_pmd.c
@@ -22,6 +22,7 @@
 static unsigned int ccp_pmd_init_done;
 uint8_t ccp_cryptodev_driver_id;
 uint8_t cryptodev_cnt;
+int crypto_ccp_logtype;
 
 struct ccp_pmd_init_params {
 	struct rte_cryptodev_pmd_init_params def_p;
@@ -320,3 +321,4 @@ RTE_PMD_REGISTER_PARAM_STRING(CRYPTODEV_NAME_CCP_PMD,
 	"ccp_auth_opt=<int>");
 RTE_PMD_REGISTER_CRYPTO_DRIVER(ccp_crypto_drv, cryptodev_ccp_pmd_drv.driver,
 			       ccp_cryptodev_driver_id);
+RTE_LOG_REGISTER_DEFAULT(crypto_ccp_logtype, NOTICE);
-- 
2.45.2

Re: [PATCH 1/6] vdpa/sfc: remove dead code

[Andrew Rybchenko]

On 6/25/24 15:24, David Marchand wrote:
> This is probably a copy/paste from the net/sfc driver.
> sfc_logtype_driver is not a logtype variable from the sfc vDPA driver.
> Remove it.
> 
> Fixes: 6dad9a7353d4 ("vdpa/sfc: support device initialization")
> Cc: stable@dpdk.org
> 
> Signed-off-by: David Marchand <david.marchand@redhat.com>

Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

Re: [PATCH 3/6] net/sfc: remove use of EAL logtype

[Andrew Rybchenko]

On 6/25/24 15:24, David Marchand wrote:
> When registering a common logtype for this driver, instead of
> explicitly fall back to EAL, rely on the log registration macro to
> achieve the same.
> 
> Signed-off-by: David Marchand <david.marchand@redhat.com>

Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>

Thanks

Re: [PATCH 5/6] bus/pci: use a dynamic logtype

[Chenbo Xia]

On Jun 25, 2024, at 20:24, David Marchand <david.marchand@redhat.com> wrote:
> 
> External email: Use caution opening links or attachments
> 
> 
> Register a logtype for this bus driver and stop logging as EAL.
> 
> Signed-off-by: David Marchand <david.marchand@redhat.com>
> ---
> drivers/bus/pci/bsd/pci.c            |  44 +++----
> drivers/bus/pci/linux/pci.c          |  52 ++++----
> drivers/bus/pci/linux/pci_uio.c      |  75 +++++-------
> drivers/bus/pci/linux/pci_vfio.c     | 173 +++++++++++----------------
> drivers/bus/pci/pci_common.c         |  85 ++++++-------
> drivers/bus/pci/pci_common_uio.c     |  15 +--
> drivers/bus/pci/pci_params.c         |   9 +-
> drivers/bus/pci/private.h            |   6 +
> drivers/bus/pci/windows/pci.c        |  13 +-
> drivers/bus/pci/windows/pci_netuio.c |   7 +-
> 10 files changed, 202 insertions(+), 277 deletions(-)

Reviewed-by: Chenbo Xia <chenbox@nvidia.com>

Re: [PATCH 6/6] crypto/ccp: use a dynamic logtype

[David Marchand]

On Tue, Jun 25, 2024 at 2:25 PM David Marchand
<david.marchand@redhat.com> wrote:
> diff --git a/drivers/crypto/ccp/rte_ccp_pmd.c b/drivers/crypto/ccp/rte_ccp_pmd.c
> index 869399597e..022c1df182 100644
> --- a/drivers/crypto/ccp/rte_ccp_pmd.c
> +++ b/drivers/crypto/ccp/rte_ccp_pmd.c
> @@ -22,6 +22,7 @@
>  static unsigned int ccp_pmd_init_done;
>  uint8_t ccp_cryptodev_driver_id;
>  uint8_t cryptodev_cnt;
> +int crypto_ccp_logtype;

This declaration is unneeded as RTE_LOG_REGISTER_DEFAULT declares the
logtype var.
I will fix in a new revision if one is needed, otherwise, I will fix
when applying.

>
>  struct ccp_pmd_init_params {
>         struct rte_cryptodev_pmd_init_params def_p;


-- 
David Marchand