DPDK patches and discussions
 help / color / mirror / Atom feed
From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, Wathsala Vithanage <wathsala.vithanage@arm.com>,
	Bruce Richardson <bruce.richardson@intel.com>,
	Sachin Saxena <sachin.saxena@nxp.com>
Subject: [v2 16/30] dma/dpaa: add workaround for ERR050757
Date: Mon, 22 Jul 2024 17:28:29 +0530	[thread overview]
Message-ID: <20240722115843.1830105-17-g.singh@nxp.com> (raw)
In-Reply-To: <20240722115843.1830105-1-g.singh@nxp.com>

ERR050757 on LS104x indicates:

For outbound PCIe read transactions, a completion buffer is used
to store the PCIe completions till the data is passed back to the
initiator. At most 16 outstanding transactions are allowed and
maximum read request is 256 bytes. The completion buffer size
inside the controller needs to be at least 4KB, but the PCIe
controller has 3 KB of buffer. In case the size of pending
outbound read transactions of more than 3KB, the PCIe controller
may drop the incoming completions without notifying the initiator
of the transaction, leaving transactions unfinished. All
subsequent outbound reads to PCIe are blocked permanently.
To avoid qDMA hang as it keeps waiting for data that was silently
dropped, set stride mode for qDMA

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
 config/arm/meson.build       |  3 ++-
 doc/guides/dmadevs/dpaa.rst  |  2 ++
 drivers/dma/dpaa/dpaa_qdma.c | 18 ++++++++++++++++++
 drivers/dma/dpaa/dpaa_qdma.h |  5 +++++
 4 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/config/arm/meson.build b/config/arm/meson.build
index 012935d5d7..f81e466318 100644
--- a/config/arm/meson.build
+++ b/config/arm/meson.build
@@ -468,7 +468,8 @@ soc_dpaa = {
         ['RTE_MACHINE', '"dpaa"'],
         ['RTE_LIBRTE_DPAA2_USE_PHYS_IOVA', false],
         ['RTE_MAX_LCORE', 16],
-        ['RTE_MAX_NUMA_NODES', 1]
+        ['RTE_MAX_NUMA_NODES', 1],
+	['RTE_DMA_DPAA_ERRATA_ERR050757', true]
     ],
     'numa': false
 }
diff --git a/doc/guides/dmadevs/dpaa.rst b/doc/guides/dmadevs/dpaa.rst
index f99bfc6087..746919ec6b 100644
--- a/doc/guides/dmadevs/dpaa.rst
+++ b/doc/guides/dmadevs/dpaa.rst
@@ -42,6 +42,8 @@ Compilation
 For builds using ``meson`` and ``ninja``, the driver will be built when the
 target platform is dpaa-based. No additional compilation steps are necessary.
 
+- ``RTE_DMA_DPAA_ERRATA_ERR050757`` - enable software workaround for Errata-A050757
+
 Initialization
 --------------
 
diff --git a/drivers/dma/dpaa/dpaa_qdma.c b/drivers/dma/dpaa/dpaa_qdma.c
index bb6b54e583..a21279293c 100644
--- a/drivers/dma/dpaa/dpaa_qdma.c
+++ b/drivers/dma/dpaa/dpaa_qdma.c
@@ -159,6 +159,10 @@ fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
 				      dma_addr_t dst, dma_addr_t src, u32 len)
 {
 	struct fsl_qdma_format *csgf_src, *csgf_dest;
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+	struct fsl_qdma_sdf *sdf;
+	u32 cfg = 0;
+#endif
 
 	/* Note: command table (fsl_comp->virt_addr) is getting filled
 	 * directly in cmd descriptors of queues while enqueuing the descriptor
@@ -171,6 +175,20 @@ fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
 	csgf_src = (struct fsl_qdma_format *)fsl_comp->virt_addr + 2;
 	csgf_dest = (struct fsl_qdma_format *)fsl_comp->virt_addr + 3;
 
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+	sdf = (struct fsl_qdma_sdf *)fsl_comp->desc_virt_addr;
+	sdf->cmd = rte_cpu_to_le_32(FSL_QDMA_CMD_RWTTYPE <<
+				FSL_QDMA_CMD_RWTTYPE_OFFSET);
+	if (len > FSL_QDMA_CMD_SSS_DISTANCE) {
+		sdf->cmd |= rte_cpu_to_le_32(FSL_QDMA_CMD_SSEN);
+		cfg |= rte_cpu_to_le_32(FSL_QDMA_CMD_SSS_STRIDE <<
+					FSL_QDMA_CFG_SSS_OFFSET |
+					FSL_QDMA_CMD_SSS_DISTANCE);
+		sdf->cfg = cfg;
+	} else
+		sdf->cfg = 0;
+#endif
+
 	/* Status notification is enqueued to status queue. */
 	qdma_desc_addr_set64(csgf_src, src);
 	qdma_csgf_set_len(csgf_src, len);
diff --git a/drivers/dma/dpaa/dpaa_qdma.h b/drivers/dma/dpaa/dpaa_qdma.h
index 2092fb39f5..361f88856b 100644
--- a/drivers/dma/dpaa/dpaa_qdma.h
+++ b/drivers/dma/dpaa/dpaa_qdma.h
@@ -81,6 +81,11 @@
 #define FSL_QDMA_CMD_RWTTYPE_OFFSET	28
 #define FSL_QDMA_CMD_LWC_OFFSET		16
 
+#define FSL_QDMA_CMD_SSEN		BIT(19)
+#define FSL_QDMA_CFG_SSS_OFFSET		12
+#define FSL_QDMA_CMD_SSS_STRIDE		128
+#define FSL_QDMA_CMD_SSS_DISTANCE	128
+
 #define QDMA_CCDF_STATUS		20
 #define QDMA_CCDF_OFFSET		20
 #define QDMA_CCDF_MASK			GENMASK(28, 20)
-- 
2.25.1


  parent reply	other threads:[~2024-07-22 12:01 UTC|newest]

Thread overview: 173+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-19 10:00 [PATCH 01/30] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-07-19 10:00 ` [PATCH 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-19 10:00 ` [PATCH 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-19 10:01 ` [PATCH 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-19 10:01 ` [PATCH 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-19 10:01 ` [PATCH 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-19 10:01 ` [PATCH 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-19 10:01 ` [PATCH 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-19 10:01 ` [PATCH 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-19 10:01 ` [PATCH 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-19 10:01 ` [PATCH 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-19 10:01 ` [PATCH 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-19 10:01 ` [PATCH 16/30] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-07-19 10:01 ` [PATCH 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-19 10:01 ` [PATCH 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-19 10:01 ` [PATCH 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-19 10:01 ` [PATCH 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-19 10:01 ` [PATCH 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-19 10:01 ` [PATCH 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-19 10:01 ` [PATCH 26/30] dma/dpaa: improve ERRATA workaround solution Gagandeep Singh
2024-07-19 10:01 ` [PATCH 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-19 10:01 ` [PATCH 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-19 10:01 ` [PATCH 30/30] bus/dpaa: add port bmi stats Gagandeep Singh
2024-07-22 11:58 ` [v2 00/30] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-07-22 11:58   ` [v2 01/30] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-07-22 11:58   ` [v2 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-22 11:58   ` [v2 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-22 11:58   ` [v2 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-22 11:58   ` [v2 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-22 11:58   ` [v2 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-22 11:58   ` [v2 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-22 11:58   ` [v2 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-22 11:58   ` [v2 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-22 11:58   ` [v2 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-22 11:58   ` [v2 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-22 11:58   ` [v2 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-22 11:58   ` [v2 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-22 11:58   ` [v2 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-22 11:58   ` [v2 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-22 11:58   ` Gagandeep Singh [this message]
2024-07-22 11:58   ` [v2 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-22 11:58   ` [v2 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-22 11:58   ` [v2 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-22 11:58   ` [v2 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-22 11:58   ` [v2 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-22 11:58   ` [v2 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-22 11:58   ` [v2 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-22 11:58   ` [v2 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-22 11:58   ` [v2 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-22 11:58   ` [v2 26/30] dma/dpaa: improve ERRATA workaround solution Gagandeep Singh
2024-07-22 11:58   ` [v2 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-22 11:58   ` [v2 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-22 11:58   ` [v2 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-22 11:58   ` [v2 30/30] bus/dpaa: add port bmi stats Gagandeep Singh
2024-07-22 16:39   ` [v3 00/30] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-07-22 16:39     ` [v3 01/30] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-08  7:22       ` [v4 00/15] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-10-08  7:22         ` [v4 01/15] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-08 10:57           ` [v5 00/15] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-10-08 10:57             ` [v5 01/15] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-14  9:36               ` [v6 00/15] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-10-14  9:36                 ` [v6 01/15] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-14  9:36                 ` [v6 02/15] dma/dpaa2: refactor driver code Gagandeep Singh
2024-10-14  9:36                 ` [v6 03/15] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-10-14  9:36                 ` [v6 04/15] dma/dpaa2: add short FD support Gagandeep Singh
2024-10-14  9:36                 ` [v6 05/15] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-10-14  9:36                 ` [v6 06/15] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-10-14  9:36                 ` [v6 07/15] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-10-14  9:36                 ` [v6 08/15] dma/dpaa: refactor driver Gagandeep Singh
2024-10-15  2:59                   ` Stephen Hemminger
2024-10-14  9:36                 ` [v6 09/15] dma/dpaa: support burst capacity API Gagandeep Singh
2024-10-14  9:36                 ` [v6 10/15] dma/dpaa: add silent mode support Gagandeep Singh
2024-10-14  9:36                 ` [v6 11/15] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-10-14  9:36                 ` [v6 12/15] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-10-14  9:36                 ` [v6 13/15] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-10-14  9:36                 ` [v6 14/15] dma/dpaa: add DMA error checks Gagandeep Singh
2024-10-14  9:36                 ` [v6 15/15] bus/dpaa: add port bmi stats Gagandeep Singh
2024-10-15  7:13                 ` [v7 00/15] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-10-15  7:13                   ` [v7 01/15] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-15  7:13                   ` [v7 02/15] dma/dpaa2: refactor driver code Gagandeep Singh
2024-10-15 22:11                     ` Stephen Hemminger
2024-10-16  5:09                       ` Hemant Agrawal
2024-10-16  5:13                         ` Stephen Hemminger
2024-10-16  5:15                           ` Hemant Agrawal
2024-11-09 13:37                     ` Thomas Monjalon
2024-11-09 13:51                       ` Thomas Monjalon
2024-11-09 15:13                     ` Thomas Monjalon
2024-10-15  7:13                   ` [v7 03/15] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-10-15  7:13                   ` [v7 04/15] dma/dpaa2: add short FD support Gagandeep Singh
2024-10-15  7:13                   ` [v7 05/15] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-10-15  7:13                   ` [v7 06/15] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-10-15  7:13                   ` [v7 07/15] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-11-09 15:19                     ` Thomas Monjalon
2024-10-15  7:13                   ` [v7 08/15] dma/dpaa: refactor driver Gagandeep Singh
2024-11-09 14:27                     ` Thomas Monjalon
2024-10-15  7:13                   ` [v7 09/15] dma/dpaa: support burst capacity API Gagandeep Singh
2024-10-15  7:13                   ` [v7 10/15] dma/dpaa: add silent mode support Gagandeep Singh
2024-10-15  7:13                   ` [v7 11/15] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-11-09 15:10                     ` Thomas Monjalon
2024-10-15  7:14                   ` [v7 12/15] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-10-15  7:14                   ` [v7 13/15] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-10-15  7:14                   ` [v7 14/15] dma/dpaa: add DMA error checks Gagandeep Singh
2024-10-15  7:14                   ` [v7 15/15] bus/dpaa: add port bmi stats Gagandeep Singh
2024-11-09 15:01                     ` Thomas Monjalon
2024-11-09 15:34                   ` [v7 00/15] NXP DMA driver fixes and Enhancements Thomas Monjalon
2024-10-08 10:57             ` [v5 02/15] dma/dpaa2: refactor driver code Gagandeep Singh
2024-10-08 10:57             ` [v5 03/15] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-10-08 10:57             ` [v5 04/15] dma/dpaa2: add short FD support Gagandeep Singh
2024-10-08 10:58             ` [v5 05/15] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-10-08 10:58             ` [v5 06/15] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-10-08 10:58             ` [v5 07/15] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-10-08 10:58             ` [v5 08/15] dma/dpaa: refactor driver Gagandeep Singh
2024-10-08 10:58             ` [v5 09/15] dma/dpaa: support burst capacity API Gagandeep Singh
2024-10-08 10:58             ` [v5 10/15] dma/dpaa: add silent mode support Gagandeep Singh
2024-10-08 10:58             ` [v5 11/15] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-10-08 10:58             ` [v5 12/15] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-10-08 10:58             ` [v5 13/15] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-10-08 10:58             ` [v5 14/15] dma/dpaa: add DMA error checks Gagandeep Singh
2024-10-08 10:58             ` [v5 15/15] bus/dpaa: add port bmi stats Gagandeep Singh
2024-10-09 18:02               ` Stephen Hemminger
2024-10-08  7:22         ` [v4 02/15] dma/dpaa2: refactor driver code Gagandeep Singh
2024-10-08  7:22         ` [v4 03/15] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-10-08  7:22         ` [v4 04/15] dma/dpaa2: add short FD support Gagandeep Singh
2024-10-08  7:22         ` [v4 05/15] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-10-08  7:22         ` [v4 06/15] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-10-08  7:22         ` [v4 07/15] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-10-08  7:22         ` [v4 08/15] dma/dpaa: refactor driver Gagandeep Singh
2024-10-08  7:23         ` [v4 09/15] dma/dpaa: support burst capacity API Gagandeep Singh
2024-10-08  7:23         ` [v4 10/15] dma/dpaa: add silent mode support Gagandeep Singh
2024-10-08  7:23         ` [v4 11/15] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-10-08  7:23         ` [v4 12/15] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-10-08  7:23         ` [v4 13/15] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-10-08  7:23         ` [v4 14/15] dma/dpaa: add DMA error checks Gagandeep Singh
2024-10-08  7:23         ` [v4 15/15] bus/dpaa: add port bmi stats Gagandeep Singh
2024-07-22 16:39     ` [v3 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-22 20:19       ` Stephen Hemminger
2024-10-07 20:51       ` Stephen Hemminger
2024-07-22 16:39     ` [v3 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-22 16:39     ` [v3 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-22 16:39     ` [v3 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-22 20:21       ` Stephen Hemminger
2024-07-22 16:39     ` [v3 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-22 16:39     ` [v3 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-22 16:39     ` [v3 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-22 16:39     ` [v3 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-22 16:39     ` [v3 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-22 16:39     ` [v3 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-22 16:39     ` [v3 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-22 16:39     ` [v3 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-22 16:39     ` [v3 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-22 16:39     ` [v3 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-22 16:39     ` [v3 16/30] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-07-22 16:39     ` [v3 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-22 16:39     ` [v3 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-22 16:39     ` [v3 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-22 16:39     ` [v3 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-22 16:39     ` [v3 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-22 16:39     ` [v3 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-22 16:39     ` [v3 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-22 16:39     ` [v3 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-22 16:39     ` [v3 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-22 16:39     ` [v3 26/30] dma/dpaa: improve ERRATA workaround solution Gagandeep Singh
2024-07-22 16:39     ` [v3 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-22 16:39     ` [v3 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-22 16:39     ` [v3 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-22 16:39     ` [v3 30/30] bus/dpaa: add port bmi stats Gagandeep Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240722115843.1830105-17-g.singh@nxp.com \
    --to=g.singh@nxp.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=sachin.saxena@nxp.com \
    --cc=wathsala.vithanage@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).