From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, Sachin Saxena <sachin.saxena@nxp.com>
Cc: Jun Yang <jun.yang@nxp.com>
Subject: [v2 26/30] dma/dpaa: improve ERRATA workaround solution
Date: Mon, 22 Jul 2024 17:28:39 +0530 [thread overview]
Message-ID: <20240722115843.1830105-27-g.singh@nxp.com> (raw)
In-Reply-To: <20240722115843.1830105-1-g.singh@nxp.com>
From: Jun Yang <jun.yang@nxp.com>
Fix issue of ERRATA 050757/050265 workaround which is not effective
in burst mode.
SDF/DDF is referred by first entry of compound frame table, move the DF to
compound frame table description which is suitable to adapt single copy
and SG/burst copy.
Fix SG issue which was caused by memset clearing phy address of SGE in
compound frame table.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
---
drivers/dma/dpaa/dpaa_qdma.c | 215 +++++++++++++++++------------------
drivers/dma/dpaa/dpaa_qdma.h | 7 +-
2 files changed, 107 insertions(+), 115 deletions(-)
diff --git a/drivers/dma/dpaa/dpaa_qdma.c b/drivers/dma/dpaa/dpaa_qdma.c
index 8492d0de5b..5d91ad2d70 100644
--- a/drivers/dma/dpaa/dpaa_qdma.c
+++ b/drivers/dma/dpaa/dpaa_qdma.c
@@ -11,7 +11,10 @@
static int s_data_validation;
static int s_hw_err_check;
-static int s_sg_disable = 1;
+static int s_sg_enable = 1;
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+static int s_pci_read = 1;
+#endif
static inline void
qdma_desc_addr_set64(struct fsl_qdma_comp_cmd_desc *ccdf, u64 addr)
@@ -126,10 +129,9 @@ fsl_qdma_pre_comp_sd_desc(struct fsl_qdma_queue *queue)
struct fsl_qdma_comp_cmd_desc *ccdf;
uint16_t i, j;
struct fsl_qdma_cmpd_ft *ft;
- struct fsl_qdma_df *df;
for (i = 0; i < queue->n_cq; i++) {
- dma_addr_t phy_ft = 0, phy_df = 0;
+ dma_addr_t phy_ft = 0;
queue->ft[i] = dma_pool_alloc(NULL,
sizeof(struct fsl_qdma_cmpd_ft),
@@ -156,25 +158,14 @@ fsl_qdma_pre_comp_sd_desc(struct fsl_qdma_queue *queue)
offsetof(struct fsl_qdma_cmpd_ft, desc_ssge);
queue->ft[i]->phy_dsge = phy_ft +
offsetof(struct fsl_qdma_cmpd_ft, desc_dsge);
-
- queue->df[i] = dma_pool_alloc(NULL,
- sizeof(struct fsl_qdma_df),
- RTE_CACHE_LINE_SIZE, &phy_df);
- if (!queue->df[i]) {
- rte_free(queue->ft[i]);
- queue->ft[i] = NULL;
- goto fail;
- }
-
- memset(queue->ft[i], 0, sizeof(struct fsl_qdma_cmpd_ft));
- memset(queue->df[i], 0, sizeof(struct fsl_qdma_df));
+ queue->ft[i]->phy_df = phy_ft +
+ offsetof(struct fsl_qdma_cmpd_ft, df);
ft = queue->ft[i];
- df = queue->df[i];
- sdf = &df->sdf;
- ddf = &df->ddf;
+ sdf = &ft->df.sdf;
+ ddf = &ft->df.ddf;
/* Compound Command Descriptor(Frame List Table) */
- qdma_desc_sge_addr_set64(&ft->desc_buf, phy_df);
+ qdma_desc_sge_addr_set64(&ft->desc_buf, ft->phy_df);
/* It must be 32 as Compound S/G Descriptor */
ft->desc_buf.length = sizeof(struct fsl_qdma_df);
@@ -198,10 +189,8 @@ fsl_qdma_pre_comp_sd_desc(struct fsl_qdma_queue *queue)
return 0;
fail:
- for (j = 0; j < i; j++) {
+ for (j = 0; j < i; j++)
rte_free(queue->ft[j]);
- rte_free(queue->df[j]);
- }
return -ENOMEM;
}
@@ -247,23 +236,12 @@ fsl_qdma_alloc_queue_resources(struct fsl_qdma_engine *fsl_qdma,
rte_free(cmd_queue->cq);
return -ENOMEM;
}
- sprintf(nm, "Descriptor Buf_%d_%d",
- block_id, queue_id);
- cmd_queue->df = rte_zmalloc(nm,
- sizeof(void *) * QDMA_QUEUE_SIZE, 0);
- if (!cmd_queue->df) {
- DPAA_QDMA_ERR("%s zmalloc failed!", nm);
- rte_free(cmd_queue->ft);
- rte_free(cmd_queue->cq);
- return -ENOMEM;
- }
sprintf(nm, "Pending_desc_%d_%d",
block_id, queue_id);
cmd_queue->pending_desc = rte_zmalloc(nm,
sizeof(struct fsl_qdma_desc) * FSL_QDMA_MAX_DESC_NUM, 0);
if (!cmd_queue->pending_desc) {
DPAA_QDMA_ERR("%s zmalloc failed!", nm);
- rte_free(cmd_queue->df);
rte_free(cmd_queue->ft);
rte_free(cmd_queue->cq);
return -ENOMEM;
@@ -278,7 +256,6 @@ fsl_qdma_alloc_queue_resources(struct fsl_qdma_engine *fsl_qdma,
rte_free(cmd_queue->pending_desc);
rte_free(cmd_queue->ft);
rte_free(cmd_queue->cq);
- rte_free(cmd_queue->df);
return -ENOMEM;
}
sprintf(nm, "complete-desc_ring_%d_%d",
@@ -292,7 +269,6 @@ fsl_qdma_alloc_queue_resources(struct fsl_qdma_engine *fsl_qdma,
rte_free(cmd_queue->pending_desc);
rte_free(cmd_queue->ft);
rte_free(cmd_queue->cq);
- rte_free(cmd_queue->df);
return -ENOMEM;
}
sprintf(nm, "complete-pool-desc_ring_%d_%d",
@@ -307,7 +283,6 @@ fsl_qdma_alloc_queue_resources(struct fsl_qdma_engine *fsl_qdma,
rte_free(cmd_queue->pending_desc);
rte_free(cmd_queue->ft);
rte_free(cmd_queue->cq);
- rte_free(cmd_queue->df);
return -ENOMEM;
}
@@ -320,7 +295,6 @@ fsl_qdma_alloc_queue_resources(struct fsl_qdma_engine *fsl_qdma,
static void
fsl_qdma_free_cmdq_res(struct fsl_qdma_queue *queue)
{
- rte_free(queue->df);
rte_free(queue->ft);
rte_free(queue->cq);
rte_free(queue->pending_desc);
@@ -664,8 +638,30 @@ fsl_qdma_enqueue_desc_single(struct fsl_qdma_queue *fsl_queue,
struct fsl_qdma_comp_sg_desc *csgf_src, *csgf_dest;
struct fsl_qdma_cmpd_ft *ft;
int ret;
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+ struct fsl_qdma_sdf *sdf;
+#endif
ft = fsl_queue->ft[fsl_queue->ci];
+
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+ if (s_pci_read) {
+ sdf = &ft->df.sdf;
+ sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050265
+ sdf->prefetch = 1;
+#endif
+ if (len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
+ sdf->ssen = 1;
+ sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
+ sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
+ } else {
+ sdf->ssen = 0;
+ sdf->sss = 0;
+ sdf->ssd = 0;
+ }
+ }
+#endif
csgf_src = &ft->desc_sbuf;
csgf_dest = &ft->desc_dbuf;
qdma_desc_sge_addr_set64(csgf_src, src);
@@ -745,7 +741,7 @@ fsl_qdma_enqueue_overflow(struct fsl_qdma_queue *fsl_queue)
}
static int
-fsl_qdma_enqueue_desc(struct fsl_qdma_queue *fsl_queue)
+fsl_qdma_enqueue_desc_sg(struct fsl_qdma_queue *fsl_queue)
{
uint8_t *block = fsl_queue->block_vir, i;
struct fsl_qdma_comp_sg_desc *csgf_src, *csgf_dest;
@@ -758,74 +754,10 @@ fsl_qdma_enqueue_desc(struct fsl_qdma_queue *fsl_queue)
struct fsl_qdma_sdf *sdf;
#endif
- ret = fsl_qdma_enqueue_overflow(fsl_queue);
- if (unlikely(ret))
- return ret;
-
ft = fsl_queue->ft[fsl_queue->ci];
csgf_src = &ft->desc_sbuf;
csgf_dest = &ft->desc_dbuf;
-#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
- sdf = &fsl_queue->df[fsl_queue->ci]->sdf;
- sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
-#ifdef RTE_DMA_DPAA_ERRATA_ERR050265
- sdf->prefetch = 1;
-#endif
-#endif
-
- if (num == 1) {
-#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
- if (fsl_queue->pending_desc[start].len >
- FSL_QDMA_CMD_SSS_DISTANCE) {
- sdf->ssen = 1;
- sdf->sss = FSL_QDMA_CMD_SSS_STRIDE;
- sdf->ssd = FSL_QDMA_CMD_SSS_DISTANCE;
- } else {
- sdf->sss = 0;
- sdf->ssd = 0;
- }
-#endif
- ret = fsl_qdma_enqueue_desc_single(fsl_queue,
- fsl_queue->pending_desc[start].dst,
- fsl_queue->pending_desc[start].src,
- fsl_queue->pending_desc[start].len);
- if (!ret) {
- fsl_queue->pending_start =
- (start + 1) & (fsl_queue->pending_max - 1);
- fsl_queue->pending_num = 0;
- }
- return ret;
- } else if (s_sg_disable) {
- while (fsl_queue->pending_num > 0) {
-#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
- if (fsl_queue->pending_desc[start].len >
- FSL_QDMA_CMD_SSS_DISTANCE) {
- sdf->ssen = 1;
- sdf->sss = FSL_QDMA_CMD_SSS_STRIDE;
- sdf->ssd = FSL_QDMA_CMD_SSS_DISTANCE;
- } else {
- sdf->sss = 0;
- sdf->ssd = 0;
- }
-#endif
- ret = fsl_qdma_enqueue_desc_single(fsl_queue,
- fsl_queue->pending_desc[start].dst,
- fsl_queue->pending_desc[start].src,
- fsl_queue->pending_desc[start].len);
- if (!ret) {
- start = (start + 1) &
- (fsl_queue->pending_max - 1);
- fsl_queue->pending_start = start;
- fsl_queue->pending_num--;
- } else {
- DPAA_QDMA_ERR("Eq pending desc failed(%d)",
- ret);
- return -EIO;
- }
- }
- return 0;
- }
qdma_desc_sge_addr_set64(csgf_src, ft->phy_ssge);
csgf_src->extion = 1;
qdma_desc_sge_addr_set64(csgf_dest, ft->phy_dsge);
@@ -849,13 +781,21 @@ fsl_qdma_enqueue_desc(struct fsl_qdma_queue *fsl_queue)
csgf_src->length = total_len;
csgf_dest->length = total_len;
#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
- if (total_len > FSL_QDMA_CMD_SSS_DISTANCE) {
- sdf->ssen = 1;
- sdf->sss = FSL_QDMA_CMD_SSS_STRIDE;
- sdf->ssd = FSL_QDMA_CMD_SSS_DISTANCE;
- } else {
- sdf->sss = 0;
- sdf->ssd = 0;
+ if (s_pci_read) {
+ sdf = &ft->df.sdf;
+ sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050265
+ sdf->prefetch = 1;
+#endif
+ if (total_len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
+ sdf->ssen = 1;
+ sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
+ sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
+ } else {
+ sdf->ssen = 0;
+ sdf->sss = 0;
+ sdf->ssd = 0;
+ }
}
#endif
ret = fsl_qdma_enqueue_desc_to_ring(fsl_queue, 1);
@@ -875,6 +815,51 @@ fsl_qdma_enqueue_desc(struct fsl_qdma_queue *fsl_queue)
return 0;
}
+static int
+fsl_qdma_enqueue_desc(struct fsl_qdma_queue *fsl_queue)
+{
+ uint16_t start = fsl_queue->pending_start;
+ int ret;
+
+ ret = fsl_qdma_enqueue_overflow(fsl_queue);
+ if (unlikely(ret))
+ return ret;
+
+ if (fsl_queue->pending_num == 1) {
+ ret = fsl_qdma_enqueue_desc_single(fsl_queue,
+ fsl_queue->pending_desc[start].dst,
+ fsl_queue->pending_desc[start].src,
+ fsl_queue->pending_desc[start].len);
+ if (!ret) {
+ fsl_queue->pending_start =
+ (start + 1) & (fsl_queue->pending_max - 1);
+ fsl_queue->pending_num = 0;
+ }
+ return ret;
+ } else if (!s_sg_enable) {
+ while (fsl_queue->pending_num > 0) {
+ ret = fsl_qdma_enqueue_desc_single(fsl_queue,
+ fsl_queue->pending_desc[start].dst,
+ fsl_queue->pending_desc[start].src,
+ fsl_queue->pending_desc[start].len);
+ if (!ret) {
+ start = (start + 1) &
+ (fsl_queue->pending_max - 1);
+ fsl_queue->pending_start = start;
+ fsl_queue->pending_num--;
+ } else {
+ DPAA_QDMA_ERR("Eq pending desc failed(%d)",
+ ret);
+ return -EIO;
+ }
+ }
+
+ return 0;
+ }
+
+ return fsl_qdma_enqueue_desc_sg(fsl_queue);
+}
+
static int
dpaa_info_get(const struct rte_dma_dev *dev, struct rte_dma_info *dev_info,
__rte_unused uint32_t info_sz)
@@ -1276,6 +1261,7 @@ dpaa_qdma_init(struct rte_dma_dev *dmadev)
int regs_size;
int ret;
uint32_t i, j, k;
+ char *penv;
if (getenv("DPAA_QDMA_DATA_VALIDATION"))
s_data_validation = 1;
@@ -1283,8 +1269,15 @@ dpaa_qdma_init(struct rte_dma_dev *dmadev)
if (getenv("DPAA_QDMA_HW_ERR_CHECK"))
s_hw_err_check = 1;
- if (getenv("DPAA_QDMA_SG_DISABLE"))
- s_sg_disable = 1;
+ penv = getenv("DPAA_QDMA_SG_ENABLE");
+ if (penv)
+ s_sg_enable = atoi(penv);
+
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+ penv = getenv("DPAA_QDMA_PCI_READ");
+ if (penv)
+ s_pci_read = atoi(penv);
+#endif
fsl_qdma->n_queues = QDMA_QUEUES * QDMA_BLOCKS;
fsl_qdma->num_blocks = QDMA_BLOCKS;
diff --git a/drivers/dma/dpaa/dpaa_qdma.h b/drivers/dma/dpaa/dpaa_qdma.h
index 9d8d9e865d..753ac6973d 100644
--- a/drivers/dma/dpaa/dpaa_qdma.h
+++ b/drivers/dma/dpaa/dpaa_qdma.h
@@ -88,9 +88,7 @@
#define FSL_QDMA_CMD_RWTTYPE 0x4
#define FSL_QDMA_CMD_LWC 0x2
-#define FSL_QDMA_CFG_SSS_OFFSET 12
-#define FSL_QDMA_CMD_SSS_STRIDE 128
-#define FSL_QDMA_CMD_SSS_DISTANCE 128
+#define FSL_QDMA_CMD_SS_ERR050757_LEN 128
/* qdma engine attribute */
#define QDMA_QUEUE_SIZE FSL_QDMA_CIRCULAR_DESC_SIZE_MIN
@@ -192,8 +190,10 @@ struct fsl_qdma_cmpd_ft {
uint64_t cache_align[2];
struct fsl_qdma_comp_sg_desc desc_ssge[FSL_QDMA_SG_MAX_ENTRY];
struct fsl_qdma_comp_sg_desc desc_dsge[FSL_QDMA_SG_MAX_ENTRY];
+ struct fsl_qdma_df df;
uint64_t phy_ssge;
uint64_t phy_dsge;
+ uint64_t phy_df;
} __rte_packed;
#define FSL_QDMA_ERR_REG_STATUS_OFFSET 0xe00
@@ -273,7 +273,6 @@ struct fsl_qdma_queue {
uint8_t pending_num;
uint16_t complete_start;
dma_addr_t bus_addr;
- struct fsl_qdma_df **df;
void *engine;
};
--
2.25.1
next prev parent reply other threads:[~2024-07-22 12:02 UTC|newest]
Thread overview: 173+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-19 10:00 [PATCH 01/30] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-07-19 10:00 ` [PATCH 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-19 10:00 ` [PATCH 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-19 10:01 ` [PATCH 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-19 10:01 ` [PATCH 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-19 10:01 ` [PATCH 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-19 10:01 ` [PATCH 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-19 10:01 ` [PATCH 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-19 10:01 ` [PATCH 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-19 10:01 ` [PATCH 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-19 10:01 ` [PATCH 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-19 10:01 ` [PATCH 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-19 10:01 ` [PATCH 16/30] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-07-19 10:01 ` [PATCH 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-19 10:01 ` [PATCH 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-19 10:01 ` [PATCH 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-19 10:01 ` [PATCH 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-19 10:01 ` [PATCH 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-19 10:01 ` [PATCH 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-19 10:01 ` [PATCH 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-19 10:01 ` [PATCH 26/30] dma/dpaa: improve ERRATA workaround solution Gagandeep Singh
2024-07-19 10:01 ` [PATCH 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-19 10:01 ` [PATCH 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-19 10:01 ` [PATCH 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-19 10:01 ` [PATCH 30/30] bus/dpaa: add port bmi stats Gagandeep Singh
2024-07-22 11:58 ` [v2 00/30] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-07-22 11:58 ` [v2 01/30] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-07-22 11:58 ` [v2 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-22 11:58 ` [v2 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-22 11:58 ` [v2 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-22 11:58 ` [v2 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-22 11:58 ` [v2 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-22 11:58 ` [v2 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-22 11:58 ` [v2 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-22 11:58 ` [v2 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-22 11:58 ` [v2 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-22 11:58 ` [v2 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-22 11:58 ` [v2 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-22 11:58 ` [v2 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-22 11:58 ` [v2 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-22 11:58 ` [v2 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-22 11:58 ` [v2 16/30] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-07-22 11:58 ` [v2 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-22 11:58 ` [v2 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-22 11:58 ` [v2 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-22 11:58 ` [v2 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-22 11:58 ` [v2 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-22 11:58 ` [v2 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-22 11:58 ` [v2 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-22 11:58 ` [v2 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-22 11:58 ` [v2 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-22 11:58 ` Gagandeep Singh [this message]
2024-07-22 11:58 ` [v2 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-22 11:58 ` [v2 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-22 11:58 ` [v2 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-22 11:58 ` [v2 30/30] bus/dpaa: add port bmi stats Gagandeep Singh
2024-07-22 16:39 ` [v3 00/30] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-07-22 16:39 ` [v3 01/30] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-08 7:22 ` [v4 00/15] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-10-08 7:22 ` [v4 01/15] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-08 10:57 ` [v5 00/15] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-10-08 10:57 ` [v5 01/15] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-14 9:36 ` [v6 00/15] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-10-14 9:36 ` [v6 01/15] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-14 9:36 ` [v6 02/15] dma/dpaa2: refactor driver code Gagandeep Singh
2024-10-14 9:36 ` [v6 03/15] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-10-14 9:36 ` [v6 04/15] dma/dpaa2: add short FD support Gagandeep Singh
2024-10-14 9:36 ` [v6 05/15] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-10-14 9:36 ` [v6 06/15] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-10-14 9:36 ` [v6 07/15] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-10-14 9:36 ` [v6 08/15] dma/dpaa: refactor driver Gagandeep Singh
2024-10-15 2:59 ` Stephen Hemminger
2024-10-14 9:36 ` [v6 09/15] dma/dpaa: support burst capacity API Gagandeep Singh
2024-10-14 9:36 ` [v6 10/15] dma/dpaa: add silent mode support Gagandeep Singh
2024-10-14 9:36 ` [v6 11/15] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-10-14 9:36 ` [v6 12/15] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-10-14 9:36 ` [v6 13/15] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-10-14 9:36 ` [v6 14/15] dma/dpaa: add DMA error checks Gagandeep Singh
2024-10-14 9:36 ` [v6 15/15] bus/dpaa: add port bmi stats Gagandeep Singh
2024-10-15 7:13 ` [v7 00/15] NXP DMA driver fixes and Enhancements Gagandeep Singh
2024-10-15 7:13 ` [v7 01/15] dma/dpaa2: configure route by port by PCIe port param Gagandeep Singh
2024-10-15 7:13 ` [v7 02/15] dma/dpaa2: refactor driver code Gagandeep Singh
2024-10-15 22:11 ` Stephen Hemminger
2024-10-16 5:09 ` Hemant Agrawal
2024-10-16 5:13 ` Stephen Hemminger
2024-10-16 5:15 ` Hemant Agrawal
2024-11-09 13:37 ` Thomas Monjalon
2024-11-09 13:51 ` Thomas Monjalon
2024-11-09 15:13 ` Thomas Monjalon
2024-10-15 7:13 ` [v7 03/15] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-10-15 7:13 ` [v7 04/15] dma/dpaa2: add short FD support Gagandeep Singh
2024-10-15 7:13 ` [v7 05/15] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-10-15 7:13 ` [v7 06/15] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-10-15 7:13 ` [v7 07/15] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-11-09 15:19 ` Thomas Monjalon
2024-10-15 7:13 ` [v7 08/15] dma/dpaa: refactor driver Gagandeep Singh
2024-11-09 14:27 ` Thomas Monjalon
2024-10-15 7:13 ` [v7 09/15] dma/dpaa: support burst capacity API Gagandeep Singh
2024-10-15 7:13 ` [v7 10/15] dma/dpaa: add silent mode support Gagandeep Singh
2024-10-15 7:13 ` [v7 11/15] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-11-09 15:10 ` Thomas Monjalon
2024-10-15 7:14 ` [v7 12/15] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-10-15 7:14 ` [v7 13/15] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-10-15 7:14 ` [v7 14/15] dma/dpaa: add DMA error checks Gagandeep Singh
2024-10-15 7:14 ` [v7 15/15] bus/dpaa: add port bmi stats Gagandeep Singh
2024-11-09 15:01 ` Thomas Monjalon
2024-11-09 15:34 ` [v7 00/15] NXP DMA driver fixes and Enhancements Thomas Monjalon
2024-10-08 10:57 ` [v5 02/15] dma/dpaa2: refactor driver code Gagandeep Singh
2024-10-08 10:57 ` [v5 03/15] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-10-08 10:57 ` [v5 04/15] dma/dpaa2: add short FD support Gagandeep Singh
2024-10-08 10:58 ` [v5 05/15] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-10-08 10:58 ` [v5 06/15] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-10-08 10:58 ` [v5 07/15] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-10-08 10:58 ` [v5 08/15] dma/dpaa: refactor driver Gagandeep Singh
2024-10-08 10:58 ` [v5 09/15] dma/dpaa: support burst capacity API Gagandeep Singh
2024-10-08 10:58 ` [v5 10/15] dma/dpaa: add silent mode support Gagandeep Singh
2024-10-08 10:58 ` [v5 11/15] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-10-08 10:58 ` [v5 12/15] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-10-08 10:58 ` [v5 13/15] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-10-08 10:58 ` [v5 14/15] dma/dpaa: add DMA error checks Gagandeep Singh
2024-10-08 10:58 ` [v5 15/15] bus/dpaa: add port bmi stats Gagandeep Singh
2024-10-09 18:02 ` Stephen Hemminger
2024-10-08 7:22 ` [v4 02/15] dma/dpaa2: refactor driver code Gagandeep Singh
2024-10-08 7:22 ` [v4 03/15] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-10-08 7:22 ` [v4 04/15] dma/dpaa2: add short FD support Gagandeep Singh
2024-10-08 7:22 ` [v4 05/15] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-10-08 7:22 ` [v4 06/15] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-10-08 7:22 ` [v4 07/15] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-10-08 7:22 ` [v4 08/15] dma/dpaa: refactor driver Gagandeep Singh
2024-10-08 7:23 ` [v4 09/15] dma/dpaa: support burst capacity API Gagandeep Singh
2024-10-08 7:23 ` [v4 10/15] dma/dpaa: add silent mode support Gagandeep Singh
2024-10-08 7:23 ` [v4 11/15] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-10-08 7:23 ` [v4 12/15] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-10-08 7:23 ` [v4 13/15] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-10-08 7:23 ` [v4 14/15] dma/dpaa: add DMA error checks Gagandeep Singh
2024-10-08 7:23 ` [v4 15/15] bus/dpaa: add port bmi stats Gagandeep Singh
2024-07-22 16:39 ` [v3 02/30] dma/dpaa2: support multiple HW queues Gagandeep Singh
2024-07-22 20:19 ` Stephen Hemminger
2024-10-07 20:51 ` Stephen Hemminger
2024-07-22 16:39 ` [v3 03/30] dma/dpaa2: adapt DMA driver API Gagandeep Singh
2024-07-22 16:39 ` [v3 04/30] dma/dpaa2: multiple process support Gagandeep Singh
2024-07-22 16:39 ` [v3 05/30] dma/dpaa2: add sanity check for SG entry Gagandeep Singh
2024-07-22 20:21 ` Stephen Hemminger
2024-07-22 16:39 ` [v3 06/30] dma/dpaa2: include DPAA2 specific header files Gagandeep Singh
2024-07-22 16:39 ` [v3 07/30] dma/dpaa2: borrow flags of DMA operation to pass job context Gagandeep Singh
2024-07-22 16:39 ` [v3 08/30] bus/fslmc: enhance the qbman dq storage logic Gagandeep Singh
2024-07-22 16:39 ` [v3 09/30] dma/dpaa2: add short FD support Gagandeep Singh
2024-07-22 16:39 ` [v3 10/30] dma/dpaa2: limit the max descriptor number Gagandeep Singh
2024-07-22 16:39 ` [v3 11/30] dma/dpaa2: change the DMA copy return value Gagandeep Singh
2024-07-22 16:39 ` [v3 12/30] dma/dpaa2: move the qdma header to common place Gagandeep Singh
2024-07-22 16:39 ` [v3 13/30] dma/dpaa: support multi channels Gagandeep Singh
2024-07-22 16:39 ` [v3 14/30] dma/dpaa: fix job enqueue Gagandeep Singh
2024-07-22 16:39 ` [v3 15/30] dma/dpaa: add burst capacity API Gagandeep Singh
2024-07-22 16:39 ` [v3 16/30] dma/dpaa: add workaround for ERR050757 Gagandeep Singh
2024-07-22 16:39 ` [v3 17/30] dma/dpaa: qdma stall workaround for ERR050265 Gagandeep Singh
2024-07-22 16:39 ` [v3 18/30] dma/dpaa: remove unwanted desc Gagandeep Singh
2024-07-22 16:39 ` [v3 19/30] dma/dpaa: data path optimization Gagandeep Singh
2024-07-22 16:39 ` [v3 20/30] dma/dpaa: refactor driver Gagandeep Singh
2024-07-22 16:39 ` [v3 21/30] dma/dpaa: dequeue status queue Gagandeep Singh
2024-07-22 16:39 ` [v3 22/30] dma/dpaa: add Scatter Gather support Gagandeep Singh
2024-07-22 16:39 ` [v3 23/30] dma/dpaa: block dequeue Gagandeep Singh
2024-07-22 16:39 ` [v3 24/30] dma/dpaa: improve congestion handling Gagandeep Singh
2024-07-22 16:39 ` [v3 25/30] dma/dpaa: disable SG descriptor as default Gagandeep Singh
2024-07-22 16:39 ` [v3 26/30] dma/dpaa: improve ERRATA workaround solution Gagandeep Singh
2024-07-22 16:39 ` [v3 27/30] dma/dpaa: improve silent mode support Gagandeep Singh
2024-07-22 16:39 ` [v3 28/30] dma/dpaa: support multiple SG copies Gagandeep Singh
2024-07-22 16:39 ` [v3 29/30] dma/dpaa: support max SG entry size Gagandeep Singh
2024-07-22 16:39 ` [v3 30/30] bus/dpaa: add port bmi stats Gagandeep Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240722115843.1830105-27-g.singh@nxp.com \
--to=g.singh@nxp.com \
--cc=dev@dpdk.org \
--cc=jun.yang@nxp.com \
--cc=sachin.saxena@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).