From: Dean Marx <dmarx@iol.unh.edu>
To: probb@iol.unh.edu, npratte@iol.unh.edu, jspewock@iol.unh.edu,
luca.vizzarro@arm.com, yoan.picchi@foss.arm.com,
Honnappa.Nagarahalli@arm.com, paul.szczepanek@arm.com,
juraj.linkes@pantheon.tech
Cc: dev@dpdk.org, Dean Marx <dmarx@iol.unh.edu>
Subject: [PATCH v1 1/2] dts: add csum HW offload to testpmd shell
Date: Mon, 12 Aug 2024 09:39:35 -0400 [thread overview]
Message-ID: <20240812133936.26344-2-dmarx@iol.unh.edu> (raw)
In-Reply-To: <20240812133936.26344-1-dmarx@iol.unh.edu>
add csum_set_hw method to testpmd shell class. Port over
set_verbose and port start/stop from queue start/stop suite.
Signed-off-by: Dean Marx <dmarx@iol.unh.edu>
---
dts/framework/remote_session/testpmd_shell.py | 94 +++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/dts/framework/remote_session/testpmd_shell.py b/dts/framework/remote_session/testpmd_shell.py
index 43e9f56517..be8fbdc295 100644
--- a/dts/framework/remote_session/testpmd_shell.py
+++ b/dts/framework/remote_session/testpmd_shell.py
@@ -806,6 +806,100 @@ def show_port_stats(self, port_id: int) -> TestPmdPortStats:
return TestPmdPortStats.parse(output)
+ def port_stop(self, port: int, verify: bool = True):
+ """Stop specified port.
+
+ Args:
+ port: Specifies the port number to use, must be between 0-32.
+ verify: If :data:`True`, the output of the command is scanned
+ to ensure specified port is stopped. If not, it is considered
+ an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and the port
+ is not stopped."""
+ port_output = self.send_command(f"port stop {port}")
+ if verify:
+ if "Done" not in port_output:
+ self._logger.debug(f"Failed to stop port {port}: \n{port_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to stop port {port}.")
+
+ def port_start(self, port: int, verify: bool = True):
+ """Start specified port.
+
+ Args:
+ port: Specifies the port number to use, must be between 0-32.
+ verify: If :data:`True`, the output of the command is scanned
+ to ensure specified port is started. If not, it is considered
+ an error.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and the port
+ is not started."""
+ port_output = self.send_command(f"port start {port}")
+ if verify:
+ if "Done" not in port_output:
+ self._logger.debug(f"Failed to start port {port}: \n{port_output}")
+ raise InteractiveCommandExecutionError(f"Testpmd failed to start port {port}.")
+
+ def csum_set_hw(self, layer: str, port_id: int, verify: bool = True) -> None:
+ """Enables hardware checksum offloading on the specified layer.
+
+ Args:
+ layer: The layer that checksum offloading should be enabled on.
+ options: tcp, ip, udp, sctp, outer-ip, outer-udp.
+ port_id: The port number to enable checksum offloading on, should be within 0-32.
+ verify: If :data:`True` the output of the command will be scanned in an attempt to
+ verify that checksum offloading was enabled on the port.
+
+ Raises:
+ InteractiveCommandExecutionError: If checksum offload is not enabled successfully.
+ """
+ csum_output = self.send_command(f"csum set {layer} hw {port_id}")
+ if (verify and ("Bad arguments" in csum_output or f"Please stop port {port_id} first")):
+ self._logger.debug(f"Failed to set csum hw mode on port {port_id}:\n{csum_output}")
+ raise InteractiveCommandExecutionError(
+ f"Failed to set csum hw mode on port {port_id}"
+ )
+ if verify and f"checksum offload is not supported by port {port_id}" in csum_output:
+ self._logger.debug(f"Checksum {layer} offload is not supported by port {port_id}:\n{csum_output}")
+
+ success = False
+ if "outer-ip" in layer:
+ if "Outer-Ip checksum offload is hw" in csum_output:
+ success = True
+ if "outer-udp" in layer:
+ if "Outer-Udp checksum offload is hw" in csum_output:
+ success = True
+ else:
+ if f"{layer.upper} checksum offload is hw" in csum_output:
+ success = True
+ if not success and verify:
+ self._logger.debug(f"Failed to set csum hw mode on port {port_id}:\n{csum_output}")
+
+ def set_verbose(self, level: int, verify: bool = True) -> None:
+ """Set debug verbosity level.
+
+ Args:
+ level: 0 - silent except for error
+ 1 - fully verbose except for Tx packets
+ 2 - fully verbose except for Rx packets
+ >2 - fully verbose
+ verify: if :data:`True` an additional command will be sent to verify that verbose level
+ is properly set. Defaults to :data:`True`.
+
+ Raises:
+ InteractiveCommandExecutionError: If `verify` is :data:`True` and verbose level
+ is not correctly set.
+ """
+ verbose_output = self.send_command(f"set verbose {level}")
+ if verify:
+ if "Change verbose level" not in verbose_output:
+ self._logger.debug(f"Failed to set verbose level to {level}: \n{verbose_output}")
+ raise InteractiveCommandExecutionError(
+ f"Testpmd failed to set verbose level to {level}."
+ )
+
def _close(self) -> None:
"""Overrides :meth:`~.interactive_shell.close`."""
self.stop()
--
2.44.0
next prev parent reply other threads:[~2024-08-12 13:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-12 13:39 [RFC v1 0/2] dts: initial checksum offload suite Dean Marx
2024-08-12 13:39 ` Dean Marx [this message]
2024-08-12 20:32 ` [PATCH v1 1/2] dts: add csum HW offload to testpmd shell Nicholas Pratte
2024-08-12 13:39 ` [PATCH v1 2/2] dts: checksum offload test suite Dean Marx
2024-08-16 14:20 [PATCH v1 0/2] dts: port over checksum offload suite Dean Marx
2024-08-16 14:20 ` [PATCH v1 1/2] dts: add csum HW offload to testpmd shell Dean Marx
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240812133936.26344-2-dmarx@iol.unh.edu \
--to=dmarx@iol.unh.edu \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=dev@dpdk.org \
--cc=jspewock@iol.unh.edu \
--cc=juraj.linkes@pantheon.tech \
--cc=luca.vizzarro@arm.com \
--cc=npratte@iol.unh.edu \
--cc=paul.szczepanek@arm.com \
--cc=probb@iol.unh.edu \
--cc=yoan.picchi@foss.arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).