DPDK patches and discussions
 help / color / mirror / Atom feed
From: Amiya Ranjan Mohakud <amiyaranjan.mohakud@gmail.com>
To: dev@dpdk.org
Cc: amiyaranjan.mohakud@gmail.com, stable@dpdk.org
Subject: [PATCH] net/iavf: fix VLAN offload strip flag
Date: Sat, 21 Jun 2025 07:26:24 +0530	[thread overview]
Message-ID: <20250621015624.35284-1-amiyaranjan.mohakud@gmail.com> (raw)

 For i40e kernel drivers which support either vlan(v1) or vlan(v2)
 VIRTCHNL OP,it will set strip on when setting filter on. But dpdk
 side will not change strip flag. To be consistent with dpdk side,
 explicitly disable strip again.

Bugzilla ID:1725
Cc: stable@dpdk.org

Signed-off-by: Amiya Ranjan Mohakud <amiyaranjan.mohakud@gmail.com>
---
 drivers/net/intel/iavf/iavf_ethdev.c | 48 +++++++++++++++++-----------
 1 file changed, 29 insertions(+), 19 deletions(-)

diff --git a/drivers/net/intel/iavf/iavf_ethdev.c b/drivers/net/intel/iavf/iavf_ethdev.c
index b3dacbef84..f93e7bf9ae 100644
--- a/drivers/net/intel/iavf/iavf_ethdev.c
+++ b/drivers/net/intel/iavf/iavf_ethdev.c
@@ -1378,13 +1378,38 @@ iavf_dev_del_mac_addr(struct rte_eth_dev *dev, uint32_t index)
 	vf->mac_num--;
 }
 
+static int
+iavf_disable_vlan_strip_ex(struct rte_eth_dev *dev, int on)
+{
+	/* For i40e kernel drivers which supports both vlan(v1 & v2) VIRTCHNL OP,
+	 * it will set strip on when setting filter on but dpdk side will not
+	 * change strip flag. To be consistent with dpdk side, explicitly disable
+	 * strip again.
+	 *
+	 */
+	struct iavf_adapter *adapter =
+		IAVF_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
+	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
+	int err;
+
+	if (adapter->hw.mac.type == IAVF_MAC_XL710 ||
+	    adapter->hw.mac.type == IAVF_MAC_VF ||
+	    adapter->hw.mac.type == IAVF_MAC_X722_VF) {
+		if (on && !(dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)) {
+			err = iavf_disable_vlan_strip(adapter);
+			if (err)
+				return -EIO;
+		}
+	}
+	return 0;
+}
+
 static int
 iavf_dev_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 {
 	struct iavf_adapter *adapter =
 		IAVF_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
 	struct iavf_info *vf = IAVF_DEV_PRIVATE_TO_VF(adapter);
-	struct rte_eth_conf *dev_conf = &dev->data->dev_conf;
 	int err;
 
 	if (adapter->closed)
@@ -1394,7 +1419,8 @@ iavf_dev_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 		err = iavf_add_del_vlan_v2(adapter, vlan_id, on);
 		if (err)
 			return -EIO;
-		return 0;
+
+		return iavf_disable_vlan_strip_ex(dev, on);
 	}
 
 	if (!(vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
@@ -1404,23 +1430,7 @@ iavf_dev_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
 	if (err)
 		return -EIO;
 
-	/* For i40e kernel driver which only supports vlan(v1) VIRTCHNL OP,
-	 * it will set strip on when setting filter on but dpdk side will not
-	 * change strip flag. To be consistent with dpdk side, disable strip
-	 * again.
-	 *
-	 * For i40e kernel driver which supports vlan v2, dpdk will invoke vlan v2
-	 * related function, so it won't go through here.
-	 */
-	if (adapter->hw.mac.type == IAVF_MAC_XL710 ||
-	    adapter->hw.mac.type == IAVF_MAC_X722_VF) {
-		if (on && !(dev_conf->rxmode.offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP)) {
-			err = iavf_disable_vlan_strip(adapter);
-			if (err)
-				return -EIO;
-		}
-	}
-	return 0;
+	return iavf_disable_vlan_strip_ex(dev, on);
 }
 
 static void
-- 
2.39.5 (Apple Git-154)


             reply	other threads:[~2025-06-21  1:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-21  1:56 Amiya Ranjan Mohakud [this message]
  -- strict thread matches above, loose matches on Subject: below --
2025-06-20 18:33 Amiya Ranjan Mohakud

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250621015624.35284-1-amiyaranjan.mohakud@gmail.com \
    --to=amiyaranjan.mohakud@gmail.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).