From: Zaiyu Wang <zaiyuwang@trustnetic.com>
To: dev@dpdk.org
Cc: Zaiyu Wang <zaiyuwang@trustnetic.com>,
Jiawen Wu <jiawenwu@trustnetic.com>,
Jian Wang <jianwang@trustnetic.com>
Subject: [PATCH v2 01/15] net/txgbe: add basic information for Amber-Lite 25G/40G NICs
Date: Wed, 25 Jun 2025 20:50:33 +0800 [thread overview]
Message-ID: <20250625125047.18072-2-zaiyuwang@trustnetic.com> (raw)
In-Reply-To: <20250625125047.18072-1-zaiyuwang@trustnetic.com>
Add device IDs, speed and other basic information for Wangxun's
new Amber-Lite NICs: aml (10G/25G) and aml40 (40G).
Signed-off-by: Zaiyu Wang <zaiyuwang@trustnetic.com>
---
drivers/net/txgbe/base/txgbe_devids.h | 9 +++++++
drivers/net/txgbe/base/txgbe_hw.c | 17 +++++++++++++
drivers/net/txgbe/base/txgbe_regs.h | 4 ++-
drivers/net/txgbe/base/txgbe_type.h | 3 +++
drivers/net/txgbe/txgbe_ethdev.c | 35 ++++++++++++++++++++-------
5 files changed, 58 insertions(+), 10 deletions(-)
diff --git a/drivers/net/txgbe/base/txgbe_devids.h b/drivers/net/txgbe/base/txgbe_devids.h
index a3f26eabf6..b7133c7d54 100644
--- a/drivers/net/txgbe/base/txgbe_devids.h
+++ b/drivers/net/txgbe/base/txgbe_devids.h
@@ -19,6 +19,15 @@
#define TXGBE_DEV_ID_WX1820 0x2001
#define TXGBE_DEV_ID_SP1000_VF 0x1000
#define TXGBE_DEV_ID_WX1820_VF 0x2000
+#define TXGBE_DEV_ID_AML 0x5000
+#define TXGBE_DEV_ID_AML5025 0x5025
+#define TXGBE_DEV_ID_AML5125 0x5125
+#define TXGBE_DEV_ID_AML5040 0x5040
+#define TXGBE_DEV_ID_AML5140 0x5140
+
+#define TXGBE_DEV_ID_AML_VF 0x5001
+#define TXGBE_DEV_ID_AML5024_VF 0x5024
+#define TXGBE_DEV_ID_AML5124_VF 0x5124
/*
* Subsystem IDs
diff --git a/drivers/net/txgbe/base/txgbe_hw.c b/drivers/net/txgbe/base/txgbe_hw.c
index dd5d3ea1fe..85dbbc5eff 100644
--- a/drivers/net/txgbe/base/txgbe_hw.c
+++ b/drivers/net/txgbe/base/txgbe_hw.c
@@ -2469,6 +2469,8 @@ s32 txgbe_init_shared_code(struct txgbe_hw *hw)
txgbe_init_ops_dummy(hw);
switch (hw->mac.type) {
case txgbe_mac_raptor:
+ case txgbe_mac_aml:
+ case txgbe_mac_aml40:
status = txgbe_init_ops_pf(hw);
break;
case txgbe_mac_raptor_vf:
@@ -2506,11 +2508,26 @@ s32 txgbe_set_mac_type(struct txgbe_hw *hw)
case TXGBE_DEV_ID_WX1820:
hw->mac.type = txgbe_mac_raptor;
break;
+ case TXGBE_DEV_ID_AML:
+ case TXGBE_DEV_ID_AML5025:
+ case TXGBE_DEV_ID_AML5125:
+ hw->mac.type = txgbe_mac_aml;
+ break;
+ case TXGBE_DEV_ID_AML5040:
+ case TXGBE_DEV_ID_AML5140:
+ hw->mac.type = txgbe_mac_aml40;
+ break;
case TXGBE_DEV_ID_SP1000_VF:
case TXGBE_DEV_ID_WX1820_VF:
hw->phy.media_type = txgbe_media_type_virtual;
hw->mac.type = txgbe_mac_raptor_vf;
break;
+ case TXGBE_DEV_ID_AML_VF:
+ case TXGBE_DEV_ID_AML5024_VF:
+ case TXGBE_DEV_ID_AML5124_VF:
+ hw->phy.media_type = txgbe_media_type_virtual;
+ hw->mac.type = txgbe_mac_aml_vf;
+ break;
default:
err = TXGBE_ERR_DEVICE_NOT_SUPPORTED;
DEBUGOUT("Unsupported device id: %x", hw->device_id);
diff --git a/drivers/net/txgbe/base/txgbe_regs.h b/drivers/net/txgbe/base/txgbe_regs.h
index 7a9ba6976f..a27860ac84 100644
--- a/drivers/net/txgbe/base/txgbe_regs.h
+++ b/drivers/net/txgbe/base/txgbe_regs.h
@@ -97,7 +97,9 @@
#define TXGBE_LINK_SPEED_2_5GB_FULL 0x0400
#define TXGBE_LINK_SPEED_5GB_FULL 0x0800
#define TXGBE_LINK_SPEED_10GB_FULL 0x0080
-#define TXGBE_LINK_SPEED_40GB_FULL 0x0100
+#define TXGBE_LINK_SPEED_25GB_FULL 0x0100
+#define TXGBE_LINK_SPEED_40GB_FULL 0x0040
+#define TXGBE_LINK_SPEED_50GB_FULL 0x0200
#define TXGBE_AUTOC_AUTONEG MS64(63, 0x1)
diff --git a/drivers/net/txgbe/base/txgbe_type.h b/drivers/net/txgbe/base/txgbe_type.h
index 4371876649..1a5e4326a7 100644
--- a/drivers/net/txgbe/base/txgbe_type.h
+++ b/drivers/net/txgbe/base/txgbe_type.h
@@ -148,7 +148,10 @@ enum txgbe_eeprom_type {
enum txgbe_mac_type {
txgbe_mac_unknown = 0,
txgbe_mac_raptor,
+ txgbe_mac_aml,
+ txgbe_mac_aml40,
txgbe_mac_raptor_vf,
+ txgbe_mac_aml_vf,
txgbe_num_macs
};
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index ea9faba2c0..2431057485 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -145,6 +145,11 @@ static void txgbe_l2_tunnel_conf(struct rte_eth_dev *dev);
static const struct rte_pci_id pci_id_txgbe_map[] = {
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, TXGBE_DEV_ID_SP1000) },
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, TXGBE_DEV_ID_WX1820) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, TXGBE_DEV_ID_AML) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, TXGBE_DEV_ID_AML5025) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, TXGBE_DEV_ID_AML5125) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, TXGBE_DEV_ID_AML5040) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_WANGXUN, TXGBE_DEV_ID_AML5140) },
{ .vendor_id = 0, /* sentinel */ },
};
@@ -1829,8 +1834,13 @@ txgbe_dev_start(struct rte_eth_dev *dev)
if (err)
goto error;
- allowed_speeds = RTE_ETH_LINK_SPEED_100M | RTE_ETH_LINK_SPEED_1G |
- RTE_ETH_LINK_SPEED_10G;
+ if (hw->mac.type == txgbe_mac_aml40)
+ allowed_speeds = RTE_ETH_LINK_SPEED_40G;
+ else if (hw->mac.type == txgbe_mac_aml)
+ allowed_speeds = RTE_ETH_LINK_SPEED_10G | RTE_ETH_LINK_SPEED_25G;
+ else
+ allowed_speeds = RTE_ETH_LINK_SPEED_100M | RTE_ETH_LINK_SPEED_1G |
+ RTE_ETH_LINK_SPEED_10G;
link_speeds = &dev->data->dev_conf.link_speeds;
if (((*link_speeds) >> 1) & ~(allowed_speeds >> 1)) {
@@ -1840,17 +1850,24 @@ txgbe_dev_start(struct rte_eth_dev *dev)
speed = 0x0;
if (*link_speeds == RTE_ETH_LINK_SPEED_AUTONEG) {
- speed = (TXGBE_LINK_SPEED_100M_FULL |
- TXGBE_LINK_SPEED_1GB_FULL |
- TXGBE_LINK_SPEED_10GB_FULL);
+ if (hw->mac.type == txgbe_mac_aml40) {
+ speed = TXGBE_LINK_SPEED_40GB_FULL;
+ } else if (hw->mac.type == txgbe_mac_aml) {
+ speed = (TXGBE_LINK_SPEED_10GB_FULL |
+ TXGBE_LINK_SPEED_25GB_FULL);
+ } else {
+ speed = (TXGBE_LINK_SPEED_100M_FULL |
+ TXGBE_LINK_SPEED_1GB_FULL |
+ TXGBE_LINK_SPEED_10GB_FULL);
+ }
hw->autoneg = true;
} else {
+ if (*link_speeds & RTE_ETH_LINK_SPEED_40G)
+ speed |= TXGBE_LINK_SPEED_40GB_FULL;
+ if (*link_speeds & RTE_ETH_LINK_SPEED_25G)
+ speed |= TXGBE_LINK_SPEED_25GB_FULL;
if (*link_speeds & RTE_ETH_LINK_SPEED_10G)
speed |= TXGBE_LINK_SPEED_10GB_FULL;
- if (*link_speeds & RTE_ETH_LINK_SPEED_5G)
- speed |= TXGBE_LINK_SPEED_5GB_FULL;
- if (*link_speeds & RTE_ETH_LINK_SPEED_2_5G)
- speed |= TXGBE_LINK_SPEED_2_5GB_FULL;
if (*link_speeds & RTE_ETH_LINK_SPEED_1G)
speed |= TXGBE_LINK_SPEED_1GB_FULL;
if (*link_speeds & RTE_ETH_LINK_SPEED_100M)
--
2.21.0.windows.1
next prev parent reply other threads:[~2025-06-25 12:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-18 9:41 [PATCH 0/2] *** Wangxun new NIC support *** Zaiyu Wang
2025-04-18 9:41 ` [PATCH 1/2] net/txgbe: add support for Wangxun new NIC Amber-Lite 25g/40g Zaiyu Wang
2025-04-18 9:41 ` [PATCH 2/2] net/txgbe: add basic code for Amber-Liter NIC configuration Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 00/15] Wangxun new NIC support Zaiyu Wang
2025-06-25 12:50 ` Zaiyu Wang [this message]
2025-06-25 12:50 ` [PATCH v2 02/15] net/txgbe: add new SW-FW mailbox interface Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 03/15] net/txgbe: add identification support for new SFP/QSFP modules Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 04/15] net/txgbe: add basic link configuration for Amber-Lite NICs Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 05/15] net/txgbe: add support for PHY configuration via SW-FW mailbox Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 06/15] net/txgbe: add RX&TX support for Amber-Lite NICs Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 07/15] net/txgbe: add hardware reset change " Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 08/15] net/txgbe: add MAC reconfiguration to avoid packet loss Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 09/15] net/txgbe: add TX head Write-Back mode for Amber-Lite NICs Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 10/15] net/txgbe: add RX desc merge " Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 11/15] net/txgbe: add FEC support for Amber-Lite 25G NICs Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 12/15] net/txgbe: add GPIO configuration Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 13/15] net/txgbe: disable unstable features Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 14/15] net/txgbe: add other hardware-related changes Zaiyu Wang
2025-06-25 12:50 ` [PATCH v2 15/15] doc: update for txgbe Zaiyu Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250625125047.18072-2-zaiyuwang@trustnetic.com \
--to=zaiyuwang@trustnetic.com \
--cc=dev@dpdk.org \
--cc=jianwang@trustnetic.com \
--cc=jiawenwu@trustnetic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).