DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Guo, Jia" <jia.guo@intel.com>
To: "Zhang, AlvinX" <alvinx.zhang@intel.com>,
	"Xie, WeiX" <weix.xie@intel.com>,
	"Wang, Haiyue" <haiyue.wang@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	"Zhang, AlvinX" <alvinx.zhang@intel.com>,
	"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v6] net/ixgbe: fix configuration of max frame size
Date: Mon, 18 Jan 2021 08:37:08 +0000	[thread overview]
Message-ID: <2178d7258751463abd729ba76054565a@intel.com> (raw)
In-Reply-To: <20210118083507.13544-1-alvinx.zhang@intel.com>

Acked-by: Jeff Guo <jia.guo@intel.com>

> -----Original Message-----
> From: Zhang,Alvin <alvinx.zhang@intel.com>
> Sent: Monday, January 18, 2021 4:35 PM
> To: Guo, Jia <jia.guo@intel.com>; Xie, WeiX <weix.xie@intel.com>; Wang,
> Haiyue <haiyue.wang@intel.com>
> Cc: dev@dpdk.org; Zhang, AlvinX <alvinx.zhang@intel.com>;
> stable@dpdk.org
> Subject: [PATCH v6] net/ixgbe: fix configuration of max frame size
> 
> From: Alvin Zhang <alvinx.zhang@intel.com>
> 
> For some types of NIC, jumbo frame is not supported in IOV mode, so if a VF
> requests to configure the frame size to not bigger than
> RTE_ETHER_MAX_LEN, the kernel driver returns 0, but the DPDK ixgbe PMD
> returens -1, this will cause the VF to fail to start when the PF driven by DPDK
> ixgbe PMD.
> 
> This patch keeps ixgbe PMD's handling mode consistent with kernel driver in
> above situation.
> 
> In addition, the value set by the command IXGBE_VF_SET_LPE represents
> the max frame size, not the mtu.
> 
> Fixes: 1b9ea09c067b ("ixgbe: support X550")
> Fixes: 95a27b3ba5f5 ("net/ixgbe: enable jumbo frame for VF")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
> ---
> 
> V3: Restore variable name from cur_frame_size to max_frs.
> V4: Update git log and add notes.
> V5: Add check for VF api version.
> V6: Update notes.
> ---
>  drivers/net/ixgbe/ixgbe_pf.c | 43
> +++++++++++++++++++++++++++++++++++--------
>  1 file changed, 35 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/ixgbe/ixgbe_pf.c b/drivers/net/ixgbe/ixgbe_pf.c
> index 833863a..2762995 100644
> --- a/drivers/net/ixgbe/ixgbe_pf.c
> +++ b/drivers/net/ixgbe/ixgbe_pf.c
> @@ -552,20 +552,47 @@ int ixgbe_pf_host_configure(struct rte_eth_dev
> *eth_dev)  }
> 
>  static int
> -ixgbe_set_vf_lpe(struct rte_eth_dev *dev, __rte_unused uint32_t vf,
> uint32_t *msgbuf)
> +ixgbe_set_vf_lpe(struct rte_eth_dev *dev, uint32_t vf, uint32_t
> +*msgbuf)
>  {
>  	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> -	uint32_t new_mtu = msgbuf[1];
> +	uint32_t max_frame = msgbuf[1];
>  	uint32_t max_frs;
>  	uint32_t hlreg0;
> -	int max_frame = new_mtu + RTE_ETHER_HDR_LEN +
> RTE_ETHER_CRC_LEN;
> 
>  	/* X540 and X550 support jumbo frames in IOV mode */
>  	if (hw->mac.type != ixgbe_mac_X540 &&
>  		hw->mac.type != ixgbe_mac_X550 &&
>  		hw->mac.type != ixgbe_mac_X550EM_x &&
> -		hw->mac.type != ixgbe_mac_X550EM_a)
> -		return -1;
> +		hw->mac.type != ixgbe_mac_X550EM_a) {
> +		struct ixgbe_vf_info *vfinfo =
> +			*IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
> >dev_private);
> +
> +		switch (vfinfo[vf].api_version) {
> +		case ixgbe_mbox_api_11:
> +		case ixgbe_mbox_api_12:
> +		case ixgbe_mbox_api_13:
> +			 /**
> +			  * Version 1.1&1.2&1.3 supports jumbo frames on
> VFs
> +			  * if PF has jumbo frames enabled which means
> legacy
> +			  * VFs are disabled.
> +			  */
> +			if (dev->data->dev_conf.rxmode.max_rx_pkt_len >
> +			    RTE_ETHER_MAX_LEN)
> +				break;
> +			/* fall through */
> +		default:
> +			/**
> +			 * If the PF or VF are running w/ jumbo frames
> enabled,
> +			 * we return -1 as we cannot support jumbo frames
> on
> +			 * legacy VFs.
> +			 */
> +			if (max_frame > RTE_ETHER_MAX_LEN ||
> +			    dev->data->dev_conf.rxmode.max_rx_pkt_len >
> +			    RTE_ETHER_MAX_LEN)
> +				return -1;
> +			break;
> +		}
> +	}
> 
>  	if (max_frame < RTE_ETHER_MIN_LEN ||
>  			max_frame >
> RTE_ETHER_MAX_JUMBO_FRAME_LEN) @@ -573,9 +600,9 @@ int
> ixgbe_pf_host_configure(struct rte_eth_dev *eth_dev)
> 
>  	max_frs = (IXGBE_READ_REG(hw, IXGBE_MAXFRS) &
>  		   IXGBE_MHADD_MFS_MASK) >>
> IXGBE_MHADD_MFS_SHIFT;
> -	if (max_frs < new_mtu) {
> +	if (max_frs < max_frame) {
>  		hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
> -		if (new_mtu > RTE_ETHER_MAX_LEN) {
> +		if (max_frame > RTE_ETHER_MAX_LEN) {
>  			dev->data->dev_conf.rxmode.offloads |=
>  				DEV_RX_OFFLOAD_JUMBO_FRAME;
>  			hlreg0 |= IXGBE_HLREG0_JUMBOEN;
> @@ -586,7 +613,7 @@ int ixgbe_pf_host_configure(struct rte_eth_dev
> *eth_dev)
>  		}
>  		IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
> 
> -		max_frs = new_mtu << IXGBE_MHADD_MFS_SHIFT;
> +		max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT;
>  		IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
>  	}
> 
> --
> 1.8.3.1


  reply	other threads:[~2021-01-18  8:37 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-14 10:14 [dpdk-dev] [PATCH] " Zhang,Alvin
2021-01-15  2:31 ` [dpdk-dev] [PATCH v2] " Zhang,Alvin
2021-01-15  6:43   ` Xie, WeiX
2021-01-15  7:00   ` [dpdk-dev] [PATCH v3] " Zhang,Alvin
2021-01-15  7:34     ` Xie, WeiX
2021-01-15  8:15     ` Guo, Jia
2021-01-15  9:50       ` Zhang, AlvinX
2021-01-15 10:08     ` [dpdk-dev] [PATCH v4] " Zhang,Alvin
2021-01-18  5:03       ` [dpdk-dev] [PATCH v5] " Zhang,Alvin
2021-01-18  5:58         ` Xie, WeiX
2021-01-18  8:35         ` [dpdk-dev] [PATCH v6] " Zhang,Alvin
2021-01-18  8:37           ` Guo, Jia [this message]
2021-01-19  5:25           ` [dpdk-dev] [PATCH v7] " Zhang,Alvin
2021-01-19  6:30             ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2178d7258751463abd729ba76054565a@intel.com \
    --to=jia.guo@intel.com \
    --cc=alvinx.zhang@intel.com \
    --cc=dev@dpdk.org \
    --cc=haiyue.wang@intel.com \
    --cc=stable@dpdk.org \
    --cc=weix.xie@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).