DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] doc: revise sample testpmd flow commands
@ 2017-04-18 14:20 Bernard Iremonger
  2017-04-26 15:04 ` Mcnamara, John
  0 siblings, 1 reply; 3+ messages in thread
From: Bernard Iremonger @ 2017-04-18 14:20 UTC (permalink / raw)
  To: dev; +Cc: john.mcnamara, wenzhuo.lu, beilei.xing, yulong.pei, Bernard Iremonger

Stop port before enabling QinQ.
Add commands to set inner and outer TPID's and start port.
Remove TPID's from flow validate and and flow create commands.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 ++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 12 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index ddd1d9257..bc949b755 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2834,16 +2834,29 @@ Output can be limited to specific groups::
 Sample QinQ flow rules
 ~~~~~~~~~~~~~~~~~~~~~~
 
+Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
+
+   testpmd> port stop 0
+   testpmd> vlan set qinq on 0
+
+The above command sets the inner and outer TPID's to 0x8100.
+
+To change the TPID's the following commands should be used::
+
+   testpmd> vlan set outer tpid 0xa100 0
+   testpmd> vlan set inner tpid 0x9100 0
+   testpmd> port start 0
+
 Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
 
 ::
 
-   testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
-       vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+   testpmd> flow validate 0 ingress pattern eth / vlan tci is 123 /
+       vlan tci is 456 / end actions vf id 1 / queue index 0 / end
    Flow rule #0 validated
 
-   testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
-       vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+   testpmd> flow create 0 ingress pattern eth / vlan tci is 4 /
+       vlan tci is 456 / end actions vf id 123 / queue index 0 / end
    Flow rule #0 created
 
    testpmd> flow list 0
@@ -2854,12 +2867,12 @@ Validate and create a QinQ rule on port 0 to steer traffic to a queue on the hos
 
 ::
 
-   testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
-        vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 0 / end
+   testpmd> flow validate 0 ingress pattern eth / vlan tci is 321 /
+        vlan tci is 654 / end actions pf / queue index 0 / end
    Flow rule #1 validated
 
-   testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
-        vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 1 / end
+   testpmd> flow create 0 ingress pattern eth / vlan tci is 321 /
+        vlan tci is 654 / end actions pf / queue index 1 / end
    Flow rule #1 created
 
    testpmd> flow list 0
@@ -2867,7 +2880,3 @@ Validate and create a QinQ rule on port 0 to steer traffic to a queue on the hos
    0       0       0       i-      ETH VLAN VLAN=>VF QUEUE
    1       0       0       i-      ETH VLAN VLAN=>PF QUEUE
 
-After creating QinQ rule(s) the following command should be issued to enable QinQ::
-
-   testpmd> vlan set qinq on 0
-
-- 
2.11.0

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-dev] [PATCH] doc: revise sample testpmd flow commands
  2017-04-18 14:20 [dpdk-dev] [PATCH] doc: revise sample testpmd flow commands Bernard Iremonger
@ 2017-04-26 15:04 ` Mcnamara, John
  2017-05-01 20:39   ` Thomas Monjalon
  0 siblings, 1 reply; 3+ messages in thread
From: Mcnamara, John @ 2017-04-26 15:04 UTC (permalink / raw)
  To: Iremonger, Bernard, dev; +Cc: Lu, Wenzhuo, Xing, Beilei, Pei, Yulong



> -----Original Message-----
> From: Iremonger, Bernard
> Sent: Tuesday, April 18, 2017 3:21 PM
> To: dev@dpdk.org
> Cc: Mcnamara, John <john.mcnamara@intel.com>; Lu, Wenzhuo
> <wenzhuo.lu@intel.com>; Xing, Beilei <beilei.xing@intel.com>; Pei, Yulong
> <yulong.pei@intel.com>; Iremonger, Bernard <bernard.iremonger@intel.com>
> Subject: [PATCH] doc: revise sample testpmd flow commands
> 
> Stop port before enabling QinQ.
> Add commands to set inner and outer TPID's and start port.
> Remove TPID's from flow validate and and flow create commands.
> 
> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>

Acked-by: John McNamara <john.mcnamara@intel.com>

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-dev] [PATCH] doc: revise sample testpmd flow commands
  2017-04-26 15:04 ` Mcnamara, John
@ 2017-05-01 20:39   ` Thomas Monjalon
  0 siblings, 0 replies; 3+ messages in thread
From: Thomas Monjalon @ 2017-05-01 20:39 UTC (permalink / raw)
  To: Iremonger, Bernard
  Cc: dev, Mcnamara, John, Lu, Wenzhuo, Xing, Beilei, Pei, Yulong

> > Stop port before enabling QinQ.
> > Add commands to set inner and outer TPID's and start port.
> > Remove TPID's from flow validate and and flow create commands.
> > 
> > Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
> 
> Acked-by: John McNamara <john.mcnamara@intel.com>

Applied, thanks

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2017-05-01 20:39 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-18 14:20 [dpdk-dev] [PATCH] doc: revise sample testpmd flow commands Bernard Iremonger
2017-04-26 15:04 ` Mcnamara, John
2017-05-01 20:39   ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).