Re: [dpdk-dev] Unusable interfaces although apparently attached to IGB_UIO

["Ananyev, Konstantin" <konstantin.ananyev@intel.com>]

Hi,

Probably try to rebuild with CONFIG_RTE_LIBRTE_IXGBE_DEBUG_*=y and rerun?
Might be it would give you some insight what is going wrong.

Konstantin

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Marc Sune
Sent: Tuesday, February 25, 2014 12:20 PM
To: <dev@dpdk.org>
Subject: [dpdk-dev] Unusable interfaces although apparently attached to IGB_UIO

Dear all,

We've been experiencing problems with interfaces being recognised by DPDK since some time now, I think since the very begining we started using DPDK (aprox. 1.3). Randomly, even on a fresh reboot (after 
modprobe->attach->launch dpdk_app), and properly attached to the IGB_UIO
kmod [0], interfaces do appear in the "probe stage" of the respective driver during RTE* initialization, but DPDK complains there are no DPDK-enabled interfaces [1].

It even happens with the examples provided [1]. Once they enter in this "zombie state", there is no way to recover them unless a reboot is performed. Attaching igb_uio -> igb -> gb_uio does not solve it either. 
This happens also with 1G copper ports.

Any ideas?

Thanks and regards
marc

p.s. Using 1.5.2 branch right now

-------------------------

[0] setup.sh

Option: 10


Network devices using IGB_UIO driver
====================================
0000:06:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' 
drv=igb_uio unused=
0000:06:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' 
drv=igb_uio unused=

Network devices using kernel driver
===================================
0000:08:00.1 'DH8900CC Series Gigabit Network Connection' if=eth3 drv=igb unused=igb_uio
0000:08:00.2 'DH8900CC Series Gigabit Network Connection' if=eth5 drv=igb unused=igb_uio
0000:08:00.3 'DH8900CC Series Gigabit Network Connection' if=eth6 drv=igb unused=igb_uio
0000:08:00.4 'DH8900CC Series Gigabit Network Connection' if=eth7 drv=igb unused=igb_uio
0000:09:00.0 'I350 Gigabit Network Connection' if=eth8 drv=igb unused=igb_uio *Active*
0000:09:00.1 'I350 Gigabit Network Connection' if=eth9 drv=igb unused=igb_uio *Active*
0000:09:00.2 'I350 Gigabit Network Connection' if=eth10 drv=igb unused=igb_uio
0000:09:00.3 'I350 Gigabit Network Connection' if=eth11 drv=igb unused=igb_uio
0000:85:00.0 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth2 drv=ixgbe unused=igb_uio
0000:85:00.1 '82599EB 10-Gigabit SFI/SFP+ Network Connection' if=eth4 drv=ixgbe unused=igb_uio

Other network devices
=====================
<none>

Enter PCI address of device to bind to IGB UIO driver:


[1] l2fwd

marc@bertha-dpdk:~/dpdk/examples/l2fwd/build$ sudo ./l2fwd -c 0xFF -n 2
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Detected lcore 8 as core 0 on socket 1
EAL: Detected lcore 9 as core 1 on socket 1
EAL: Detected lcore 10 as core 2 on socket 1
EAL: Detected lcore 11 as core 3 on socket 1
EAL: Detected lcore 12 as core 4 on socket 1
EAL: Detected lcore 13 as core 5 on socket 1
EAL: Detected lcore 14 as core 6 on socket 1
EAL: Detected lcore 15 as core 7 on socket 1
EAL: Skip lcore 16 (not detected)
EAL: Skip lcore 17 (not detected)
EAL: Skip lcore 18 (not detected)
EAL: Skip lcore 19 (not detected)
EAL: Skip lcore 20 (not detected)
EAL: Skip lcore 21 (not detected)
EAL: Skip lcore 22 (not detected)
EAL: Skip lcore 23 (not detected)
EAL: Skip lcore 24 (not detected)
EAL: Skip lcore 25 (not detected)
EAL: Skip lcore 26 (not detected)
EAL: Skip lcore 27 (not detected)
EAL: Skip lcore 28 (not detected)
EAL: Skip lcore 29 (not detected)
EAL: Skip lcore 30 (not detected)
EAL: Skip lcore 31 (not detected)
EAL: Skip lcore 32 (not detected)
EAL: Skip lcore 33 (not detected)
EAL: Skip lcore 34 (not detected)
EAL: Skip lcore 35 (not detected)
EAL: Skip lcore 36 (not detected)
EAL: Skip lcore 37 (not detected)
EAL: Skip lcore 38 (not detected)
EAL: Skip lcore 39 (not detected)
EAL: Skip lcore 40 (not detected)
EAL: Skip lcore 41 (not detected)
EAL: Skip lcore 42 (not detected)
EAL: Skip lcore 43 (not detected)
EAL: Skip lcore 44 (not detected)
EAL: Skip lcore 45 (not detected)
EAL: Skip lcore 46 (not detected)
EAL: Skip lcore 47 (not detected)
EAL: Skip lcore 48 (not detected)
EAL: Skip lcore 49 (not detected)
EAL: Skip lcore 50 (not detected)
EAL: Skip lcore 51 (not detected)
EAL: Skip lcore 52 (not detected)
EAL: Skip lcore 53 (not detected)
EAL: Skip lcore 54 (not detected)
EAL: Skip lcore 55 (not detected)
EAL: Skip lcore 56 (not detected)
EAL: Skip lcore 57 (not detected)
EAL: Skip lcore 58 (not detected)
EAL: Skip lcore 59 (not detected)
EAL: Skip lcore 60 (not detected)
EAL: Skip lcore 61 (not detected)
EAL: Skip lcore 62 (not detected)
EAL: Skip lcore 63 (not detected)
EAL: Setting up memory...
EAL: Ask a virtual area of 0x1073741824 bytes
EAL: Virtual area found at 0x7f7dff000000 (size = 0x40000000)
EAL: Ask a virtual area of 0x1073741824 bytes
EAL: Virtual area found at 0x7f7dbee00000 (size = 0x40000000)
EAL: Requesting 512 pages of size 2MB from socket 0
EAL: Requesting 512 pages of size 2MB from socket 1
EAL: TSC frequency is ~1200000 KHz
EAL: Master core 0 is ready (tid=4025a840)
EAL: Core 1 is ready (tid=be1f2700)
EAL: Core 4 is ready (tid=bc9ef700)
EAL: Core 6 is ready (tid=bb9ed700)
EAL: Core 3 is ready (tid=bd1f0700)
EAL: Core 7 is ready (tid=bb1ec700)
EAL: Core 5 is ready (tid=bc1ee700)
EAL: Core 2 is ready (tid=bd9f1700)
EAL: PCI device 0000:06:00.0 on NUMA socket 0
EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
EAL:   PCI memory mapped at 0x7f7e401a7000
EAL:   PCI memory mapped at 0x7f7e4026d000
EAL: PCI device 0000:06:00.1 on NUMA socket 0
EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
EAL:   PCI memory mapped at 0x7f7e40127000
EAL:   PCI memory mapped at 0x7f7e40269000
EAL: PCI device 0000:08:00.1 on NUMA socket 0
EAL:   probe driver: 8086:438 rte_igb_pmd
EAL:   0000:08:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:08:00.2 on NUMA socket 0
EAL:   probe driver: 8086:438 rte_igb_pmd
EAL:   0000:08:00.2 not managed by UIO driver, skipping
EAL: PCI device 0000:08:00.3 on NUMA socket 0
EAL:   probe driver: 8086:438 rte_igb_pmd
EAL:   0000:08:00.3 not managed by UIO driver, skipping
EAL: PCI device 0000:08:00.4 on NUMA socket 0
EAL:   probe driver: 8086:438 rte_igb_pmd
EAL:   0000:08:00.4 not managed by UIO driver, skipping
EAL: PCI device 0000:09:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 rte_igb_pmd
EAL:   0000:09:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:09:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 rte_igb_pmd
EAL:   0000:09:00.1 not managed by UIO driver, skipping
EAL: PCI device 0000:09:00.2 on NUMA socket 0
EAL:   probe driver: 8086:1521 rte_igb_pmd
EAL:   0000:09:00.2 not managed by UIO driver, skipping
EAL: PCI device 0000:09:00.3 on NUMA socket 0
EAL:   probe driver: 8086:1521 rte_igb_pmd
EAL:   0000:09:00.3 not managed by UIO driver, skipping
EAL: PCI device 0000:85:00.0 on NUMA socket 1
EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
EAL:   0000:85:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:85:00.1 on NUMA socket 1
EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
EAL:   0000:85:00.1 not managed by UIO driver, skipping
EAL: Error - exiting with code: 1
   Cause: No Ethernet ports - bye

--------------------------------------------------------------
Intel Shannon Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263
Business address: Dromore House, East Park, Shannon, Co. Clare

This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.