From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga14.intel.com (mga14.intel.com [192.55.52.115]) by dpdk.org (Postfix) with ESMTP id 8FC71B40B for ; Fri, 13 Feb 2015 10:54:13 +0100 (CET) Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by fmsmga103.fm.intel.com with ESMTP; 13 Feb 2015 01:46:41 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.09,570,1418112000"; d="scan'208";a="665898952" Received: from irsmsx103.ger.corp.intel.com ([163.33.3.157]) by fmsmga001.fm.intel.com with ESMTP; 13 Feb 2015 01:53:52 -0800 Received: from irsmsx105.ger.corp.intel.com ([169.254.7.81]) by IRSMSX103.ger.corp.intel.com ([169.254.3.247]) with mapi id 14.03.0195.001; Fri, 13 Feb 2015 09:53:52 +0000 From: "Ananyev, Konstantin" To: "Zhou, Danny" , "Liang, Cunming" , "dev@dpdk.org" Thread-Topic: [dpdk-dev] [PATCH v2 3/5] igb: enable rx queue interrupts for PF Thread-Index: AQHQP4oqVWoh+mFZ1U+ZfQHB7LjQe5zs1ngAgAADK6CAARZDgIAATDuAgAAqllA= Date: Fri, 13 Feb 2015 09:53:52 +0000 Message-ID: <2601191342CEEE43887BDE71AB977258213E61A6@irsmsx105.ger.corp.intel.com> References: <1422951511-28143-1-git-send-email-danny.zhou@intel.com> <1422951511-28143-4-git-send-email-danny.zhou@intel.com> <2601191342CEEE43887BDE71AB977258213E52E4@irsmsx105.ger.corp.intel.com> In-Reply-To: Accept-Language: en-IE, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [163.33.239.182] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Subject: Re: [dpdk-dev] [PATCH v2 3/5] igb: enable rx queue interrupts for PF X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 13 Feb 2015 09:54:14 -0000 > -----Original Message----- > From: Zhou, Danny > Sent: Friday, February 13, 2015 7:21 AM > To: Ananyev, Konstantin; Liang, Cunming; dev@dpdk.org > Subject: RE: [dpdk-dev] [PATCH v2 3/5] igb: enable rx queue interrupts fo= r PF >=20 >=20 > > -----Original Message----- > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zhou, Danny > > Sent: Friday, February 13, 2015 10:48 AM > > To: Ananyev, Konstantin; Liang, Cunming; dev@dpdk.org > > Subject: Re: [dpdk-dev] [PATCH v2 3/5] igb: enable rx queue interrupts = for PF > > > > > > > > > -----Original Message----- > > > From: Ananyev, Konstantin > > > Sent: Thursday, February 12, 2015 6:29 PM > > > To: Liang, Cunming; Zhou, Danny; dev@dpdk.org > > > Subject: RE: [dpdk-dev] [PATCH v2 3/5] igb: enable rx queue interrupt= s for PF > > > > > > > > > > > > > -----Original Message----- > > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Liang, Cunming > > > > Sent: Thursday, February 12, 2015 10:01 AM > > > > To: Zhou, Danny; dev@dpdk.org > > > > Subject: Re: [dpdk-dev] [PATCH v2 3/5] igb: enable rx queue interru= pts for PF > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zhou Danny > > > > > Sent: Tuesday, February 03, 2015 4:18 PM > > > > > To: dev@dpdk.org > > > > > Subject: [dpdk-dev] [PATCH v2 3/5] igb: enable rx queue interrupt= s for PF > > > > > > > > > > v2 changes > > > > > - Consolidate review comments related to coding style > > > > > > > > > > The patch does below for igb PF: > > > > > - Setup NIC to generate MSI-X interrupts > > > > > - Set the IVAR register to map interrupt causes to vectors > > > > > - Implement interrupt enable/disable functions > > > > > > > > > > Signed-off-by: Danny Zhou > > > > > Tested-by: Yong Liu > > > > > --- > > > > > lib/librte_pmd_e1000/e1000/e1000_hw.h | 3 + > > > > > lib/librte_pmd_e1000/e1000_ethdev.h | 6 + > > > > > lib/librte_pmd_e1000/igb_ethdev.c | 230 > > > > > ++++++++++++++++++++++++++++++---- > > > > > 3 files changed, 214 insertions(+), 25 deletions(-) > > > > > > > > > > diff --git a/lib/librte_pmd_e1000/e1000/e1000_hw.h > > > > > b/lib/librte_pmd_e1000/e1000/e1000_hw.h > > > > > index 4dd92a3..9b999ec 100644 > > > > > --- a/lib/librte_pmd_e1000/e1000/e1000_hw.h > > > > > +++ b/lib/librte_pmd_e1000/e1000/e1000_hw.h > > > > > @@ -780,6 +780,9 @@ struct e1000_mac_info { > > > > > u16 mta_reg_count; > > > > > u16 uta_reg_count; > > > > > > > > > > + u32 max_rx_queues; > > > > > + u32 max_tx_queues; > > > > > + > > > > [LCM] It can be avoid to define new things in share code. > > > > The max_rx/tx_queues in mac info only used by eth_igb_configure_msi= x_intr(). > > > > It the input param won't be limit to 'hw'. If using rte_eth_dev as = input, you can get all the info from dev_info. > > > > The risk in share code is, on next time code merging, it won't care= the change here do. > > > > > > > Will move those two parameters to dev_info struct. > > > > > +1 > > > > > > > > BTW, another question, do we really need a spin_lock here (and in ixg= be as I remember)? > > > Usually we trying to avoid locks inside PMD code, just marking API ca= ll as 'not thread safe'. > > > Konstantin > > > > > > > Will replace spin_lock with rte_atomic32_cmpset(), and return failure i= f interrupt enable/disable > > does not take effect. Then it is decision of caller(e.g. l3fwd_power) i= n application rather > > than PMD to spin or not depending on if it really needs to enable/disab= le interrupt before doing > > following stuff. > > >=20 > Looks this is not best way to make these two functions "thread safe", wil= l remove any check and > Mark them as "thread unsafe". In addition, move spin_lock stuff to L3fwd_= power. Tests shows we > have to introduce locks to ensure correct per-queue interrupt and polling= mode switch control, especially > when lots of queues are enabled. Sounds good to me. Thanks Konstantin >=20 > > > > > > > > > /* Maximum size of the MTA register table in all supported adap= ters */ > > > > > #define MAX_MTA_REG 128 > > > > > u32 mta_shadow[MAX_MTA_REG]; > > > > > diff --git a/lib/librte_pmd_e1000/e1000_ethdev.h > > > > > b/lib/librte_pmd_e1000/e1000_ethdev.h > > > > > index d155e77..713ca11 100644 > > > > > --- a/lib/librte_pmd_e1000/e1000_ethdev.h > > > > > +++ b/lib/librte_pmd_e1000/e1000_ethdev.h > > > > > @@ -34,6 +34,8 @@ > > > > > #ifndef _E1000_ETHDEV_H_ > > > > > #define _E1000_ETHDEV_H_ > > > > > > > > > > +#include > > > > > + > > > > > /* need update link, bit flag */ > > > > > #define E1000_FLAG_NEED_LINK_UPDATE (uint32_t)(1 << 0) > > > > > #define E1000_FLAG_MAILBOX (uint32_t)(1 << 1) > > > > > @@ -105,10 +107,14 @@ > > > > > #define E1000_FTQF_QUEUE_SHIFT 16 > > > > > #define E1000_FTQF_QUEUE_ENABLE 0x00000100 > > > > > > > > > > +/* maximum number of other interrupts besides Rx & Tx interrupts= */ > > > > > +#define E1000_MAX_OTHER_INTR 1 > > > > > + > > > > > /* structure for interrupt relative data */ > > > > > struct e1000_interrupt { > > > > > uint32_t flags; > > > > > uint32_t mask; > > > > > + rte_spinlock_t lock; > > > > > }; > > > > > > > > > > /* local vfta copy */ > > > > > diff --git a/lib/librte_pmd_e1000/igb_ethdev.c > > > > > b/lib/librte_pmd_e1000/igb_ethdev.c > > > > > index 2a268b8..7d9b103 100644 > > > > > --- a/lib/librte_pmd_e1000/igb_ethdev.c > > > > > +++ b/lib/librte_pmd_e1000/igb_ethdev.c > > > > > @@ -97,6 +97,7 @@ static int eth_igb_flow_ctrl_get(struct rte_et= h_dev *dev, > > > > > static int eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, > > > > > struct rte_eth_fc_conf *fc_conf); > > > > > static int eth_igb_lsc_interrupt_setup(struct rte_eth_dev *dev); > > > > > +static int eth_igb_rxq_interrupt_setup(struct rte_eth_dev *dev); > > > > > static int eth_igb_interrupt_get_status(struct rte_eth_dev *dev)= ; > > > > > static int eth_igb_interrupt_action(struct rte_eth_dev *dev); > > > > > static void eth_igb_interrupt_handler(struct rte_intr_handle *ha= ndle, > > > > > @@ -191,6 +192,14 @@ static int eth_igb_filter_ctrl(struct rte_et= h_dev *dev, > > > > > enum rte_filter_op filter_op, > > > > > void *arg); > > > > > > > > > > +static int eth_igb_rx_queue_intr_enable(struct rte_eth_dev *dev,= uint16_t > > > > > queue_id); > > > > > +static int eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev= , uint16_t > > > > > queue_id); > > > > > +static void eth_igb_assign_msix_vector(struct e1000_hw *hw, int8= _t direction, > > > > > + uint8_t queue, uint8_t msix_vector); > > > > > +static void eth_igb_configure_msix_intr(struct e1000_hw *hw); > > > > > +static void eth_igb_write_ivar(struct e1000_hw *hw, uint8_t msix= _vector, > > > > > + uint8_t index, uint8_t offset); > > > > > + > > > > > /* > > > > > * Define VF Stats MACRO for Non "cleared on read" register > > > > > */ > > > > > @@ -250,6 +259,8 @@ static struct eth_dev_ops eth_igb_ops =3D { > > > > > .vlan_tpid_set =3D eth_igb_vlan_tpid_set, > > > > > .vlan_offload_set =3D eth_igb_vlan_offload_set, > > > > > .rx_queue_setup =3D eth_igb_rx_queue_setup, > > > > > + .rx_queue_intr_enable =3D eth_igb_rx_queue_intr_enable, > > > > > + .rx_queue_intr_disable =3D eth_igb_rx_queue_intr_disable, > > > > > .rx_queue_release =3D eth_igb_rx_queue_release, > > > > > .rx_queue_count =3D eth_igb_rx_queue_count, > > > > > .rx_descriptor_done =3D eth_igb_rx_descriptor_done, > > > > > @@ -592,6 +603,16 @@ eth_igb_dev_init(__attribute__((unused)) str= uct > > > > > eth_driver *eth_drv, > > > > > eth_dev->data->port_id, pci_dev->id.vendor_id, > > > > > pci_dev->id.device_id); > > > > > > > > > > + /* set max interrupt vfio request */ > > > > > + struct rte_eth_dev_info dev_info; > > > > > + > > > > > + memset(&dev_info, 0, sizeof(dev_info)); > > > > > + eth_igb_infos_get(eth_dev, &dev_info); > > > > > + > > > > > + hw->mac.max_rx_queues =3D dev_info.max_rx_queues; > > > > > + > > > > > + pci_dev->intr_handle.max_intr =3D hw->mac.max_rx_queues + > > > > > E1000_MAX_OTHER_INTR; > > > > > + > > > > > rte_intr_callback_register(&(pci_dev->intr_handle), > > > > > eth_igb_interrupt_handler, (void *)eth_dev); > > > > > > > > > > @@ -754,7 +775,7 @@ eth_igb_start(struct rte_eth_dev *dev) > > > > > { > > > > > struct e1000_hw *hw =3D > > > > > E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private); > > > > > - int ret, i, mask; > > > > > + int ret, mask; > > > > > uint32_t ctrl_ext; > > > > > > > > > > PMD_INIT_FUNC_TRACE(); > > > > > @@ -794,6 +815,9 @@ eth_igb_start(struct rte_eth_dev *dev) > > > > > /* configure PF module if SRIOV enabled */ > > > > > igb_pf_host_configure(dev); > > > > > > > > > > + /* confiugre msix for rx interrupt */ > > > > > + eth_igb_configure_msix_intr(hw); > > > > > + > > > > > /* Configure for OS presence */ > > > > > igb_init_manageability(hw); > > > > > > > > > > @@ -821,33 +845,9 @@ eth_igb_start(struct rte_eth_dev *dev) > > > > > igb_vmdq_vlan_hw_filter_enable(dev); > > > > > } > > > > > > > > > > - /* > > > > > - * Configure the Interrupt Moderation register (EITR) with the = maximum > > > > > - * possible value (0xFFFF) to minimize "System Partial Write" i= ssued by > > > > > - * spurious [DMA] memory updates of RX and TX ring descriptors. > > > > > - * > > > > > - * With a EITR granularity of 2 microseconds in the 82576, only= 7/8 > > > > > - * spurious memory updates per second should be expected. > > > > > - * ((65535 * 2) / 1000.1000 ~=3D 0.131 second). > > > > > - * > > > > > - * Because interrupts are not used at all, the MSI-X is not act= ivated > > > > > - * and interrupt moderation is controlled by EITR[0]. > > > > > - * > > > > > - * Note that having [almost] disabled memory updates of RX and = TX ring > > > > > - * descriptors through the Interrupt Moderation mechanism, memo= ry > > > > > - * updates of ring descriptors are now moderated by the configu= rable > > > > > - * value of Write-Back Threshold registers. > > > > > - */ > > > > > if ((hw->mac.type =3D=3D e1000_82576) || (hw->mac.type =3D=3D e= 1000_82580) > > > > > || > > > > > (hw->mac.type =3D=3D e1000_i350) || (hw->mac.type =3D=3D e1000= _i210) > > > > > || > > > > > (hw->mac.type =3D=3D e1000_i211)) { > > > > > - uint32_t ivar; > > > > > - > > > > > - /* Enable all RX & TX queues in the IVAR registers */ > > > > > - ivar =3D (uint32_t) ((E1000_IVAR_VALID << 16) | > > > > > E1000_IVAR_VALID); > > > > > - for (i =3D 0; i < 8; i++) > > > > > - E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, i, ivar); > > > > > - > > > > > /* Configure EITR with the maximum possible value (0xFFFF) */ > > > > > E1000_WRITE_REG(hw, E1000_EITR(0), 0xFFFF); > > > > > } > > > > > @@ -901,6 +901,10 @@ eth_igb_start(struct rte_eth_dev *dev) > > > > > if (dev->data->dev_conf.intr_conf.lsc !=3D 0) > > > > > ret =3D eth_igb_lsc_interrupt_setup(dev); > > > > > > > > > > + /* check if rxq interrupt is enabled */ > > > > > + if (dev->data->dev_conf.intr_conf.rxq !=3D 0) > > > > > + eth_igb_rxq_interrupt_setup(dev); > > > > > + > > > > > /* resume enabled intr since hw reset */ > > > > > igb_intr_enable(dev); > > > > > > > > > > @@ -1791,6 +1795,35 @@ eth_igb_lsc_interrupt_setup(struct rte_eth= _dev *dev) > > > > > E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private); > > > > > > > > > > intr->mask |=3D E1000_ICR_LSC; > > > > > + rte_spinlock_init(&(intr->lock)); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +/* > > > > > + * It clears the interrupt causes and enables the interrupt. > > > > > + * It will be called once only during nic initialized. > > > > > + * > > > > > + * @param dev > > > > > + * Pointer to struct rte_eth_dev. > > > > > + * > > > > > + * @return > > > > > + * - On success, zero. > > > > > + * - On failure, a negative value. > > > > > + */ > > > > > +static int eth_igb_rxq_interrupt_setup(struct rte_eth_dev *dev) > > > > > +{ > > > > > + uint32_t mask, regval; > > > > > + struct e1000_hw *hw =3D > > > > > + E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private); > > > > > + struct rte_eth_dev_info dev_info; > > > > > + > > > > > + memset(&dev_info, 0, sizeof(dev_info)); > > > > > + eth_igb_infos_get(dev, &dev_info); > > > > > + > > > > > + mask =3D 0xFFFFFFFF >> (32 - dev_info.max_rx_queues); > > > > > + regval =3D E1000_READ_REG(hw, E1000_EIMS); > > > > > + E1000_WRITE_REG(hw, E1000_EIMS, regval | mask); > > > > > > > > > > return 0; > > > > > } > > > > > @@ -3256,5 +3289,152 @@ static struct rte_driver pmd_igbvf_drv = =3D { > > > > > .init =3D rte_igbvf_pmd_init, > > > > > }; > > > > > > > > > > +static int > > > > > +eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t = queue_id) > > > > > +{ > > > > > + struct e1000_hw *hw =3D > > > > > + E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private); > > > > > + struct e1000_interrupt *intr =3D > > > > > + E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private); > > > > > + uint32_t mask =3D 1 << queue_id; > > > > > + > > > > > + rte_spinlock_lock(&(intr->lock)); > > > > > + E1000_WRITE_REG(hw, E1000_EIMC, mask); > > > > > + E1000_WRITE_FLUSH(hw); > > > > > + rte_spinlock_unlock(&(intr->lock)); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static int > > > > > +eth_igb_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t q= ueue_id) > > > > > +{ > > > > > + struct e1000_hw *hw =3D > > > > > + E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private); > > > > > + struct e1000_interrupt *intr =3D > > > > > + E1000_DEV_PRIVATE_TO_INTR(dev->data->dev_private); > > > > > + uint32_t mask =3D 1 << queue_id; > > > > > + uint32_t regval; > > > > > + > > > > > + rte_spinlock_lock(&(intr->lock)); > > > > > + regval =3D E1000_READ_REG(hw, E1000_EIMS); > > > > > + E1000_WRITE_REG(hw, E1000_EIMS, regval | mask); > > > > > + E1000_WRITE_FLUSH(hw); > > > > > + rte_spinlock_unlock(&(intr->lock)); > > > > > + > > > > > + return 0; > > > > > +} > > > > > + > > > > > +static void > > > > > +eth_igb_write_ivar(struct e1000_hw *hw, uint8_t msix_vector, > > > > > + uint8_t index, uint8_t offset) > > > > > +{ > > > > > + uint32_t val =3D E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); > > > > > + > > > > > + /* clear bits */ > > > > > + val &=3D ~((uint32_t)0xFF << offset); > > > > > + > > > > > + /* write vector and valid bit */ > > > > > + val |=3D (msix_vector | E1000_IVAR_VALID) << offset; > > > > > + > > > > > + E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, val); > > > > > +} > > > > > + > > > > > +static void > > > > > +eth_igb_assign_msix_vector(struct e1000_hw *hw, int8_t direction= , > > > > > + uint8_t queue, uint8_t msix_vector) > > > > > +{ > > > > > + uint32_t tmp =3D 0; > > > > > + if (hw->mac.type =3D=3D e1000_82575) { > > > > > + if (direction =3D=3D 0) > > > > > + tmp =3D E1000_EICR_RX_QUEUE0 << queue; > > > > > + else if (direction =3D=3D 1) > > > > > + tmp =3D E1000_EICR_TX_QUEUE0 << queue; > > > > > + E1000_WRITE_REG(hw, E1000_MSIXBM(msix_vector), tmp); > > > > > + } else if (hw->mac.type =3D=3D e1000_82576) { > > > > > + if ((direction =3D=3D 0) || (direction =3D=3D 1)) > > > > > + eth_igb_write_ivar(hw, msix_vector, queue & 0x7, > > > > > + ((queue & 0x8) << 1) + 8 * direction); > > > > > + } else if ((hw->mac.type =3D=3D e1000_82580) || > > > > > + (hw->mac.type =3D=3D e1000_i350) || > > > > > + (hw->mac.type =3D=3D e1000_i354) || > > > > > + (hw->mac.type =3D=3D e1000_i210) || > > > > > + (hw->mac.type =3D=3D e1000_i211)) { > > > > > + if ((direction =3D=3D 0) || (direction =3D=3D 1)) > > > > > + eth_igb_write_ivar(hw, msix_vector, > > > > > + queue >> 1, > > > > > + ((queue & 0x1) << 4) + 8 * direction); > > > > > + } > > > > > +} > > > > > + > > > > > +/* > > > > > + * Sets up the hardware to generate MSI-X interrupts properly > > > > > + * @hw > > > > > + * board private structure > > > > > + */ > > > > > +static void > > > > > +eth_igb_configure_msix_intr(struct e1000_hw *hw) > > > > > +{ > > > > > + int queue_id; > > > > > + uint32_t tmpval, regval, intr_mask; > > > > > + uint32_t max_rx_queues =3D hw->mac.max_rx_queues; > > > > > + > > > > > + /* set interrupt vector for other causes */ > > > > > + if (hw->mac.type =3D=3D e1000_82575) { > > > > > + tmpval =3D E1000_READ_REG(hw, E1000_CTRL_EXT); > > > > > + /* enable MSI-X PBA support */ > > > > > + tmpval |=3D E1000_CTRL_EXT_PBA_CLR; > > > > > + > > > > > + /* Auto-Mask interrupts upon ICR read */ > > > > > + tmpval |=3D E1000_CTRL_EXT_EIAME; > > > > > + tmpval |=3D E1000_CTRL_EXT_IRCA; > > > > > + > > > > > + E1000_WRITE_REG(hw, E1000_CTRL_EXT, tmpval); > > > > > + > > > > > + /* enable msix_other interrupt */ > > > > > + E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), 0, > > > > > E1000_EIMS_OTHER); > > > > > + regval =3D E1000_READ_REG(hw, E1000_EIAC); > > > > > + E1000_WRITE_REG(hw, E1000_EIAC, regval | > > > > > E1000_EIMS_OTHER); > > > > > + regval =3D E1000_READ_REG(hw, E1000_EIAM); > > > > > + E1000_WRITE_REG(hw, E1000_EIMS, regval | > > > > > E1000_EIMS_OTHER); > > > > > + } else if ((hw->mac.type =3D=3D e1000_82576) || > > > > > + (hw->mac.type =3D=3D e1000_82580) || > > > > > + (hw->mac.type =3D=3D e1000_i350) || > > > > > + (hw->mac.type =3D=3D e1000_i354) || > > > > > + (hw->mac.type =3D=3D e1000_i210) || > > > > > + (hw->mac.type =3D=3D e1000_i211)) { > > > > > + /* turn on MSI-X capability first */ > > > > > + E1000_WRITE_REG(hw, E1000_GPIE, E1000_GPIE_MSIX_MODE | > > > > > + E1000_GPIE_PBA | > > > > > E1000_GPIE_EIAME | > > > > > + E1000_GPIE_NSICR); > > > > > + > > > > > + /* enable msix_other interrupt */ > > > > > + intr_mask =3D 1 << max_rx_queues; > > > > > + regval =3D E1000_READ_REG(hw, E1000_EIAC); > > > > > + E1000_WRITE_REG(hw, E1000_EIAC, regval | intr_mask); > > > > > + regval =3D E1000_READ_REG(hw, E1000_EIMS); > > > > > + E1000_WRITE_REG(hw, E1000_EIMS, regval | intr_mask); > > > > > + tmpval =3D (max_rx_queues | E1000_IVAR_VALID) << 8; > > > > > + > > > > > + E1000_WRITE_REG(hw, E1000_IVAR_MISC, tmpval); > > > > > + } > > > > > + > > > > > + /* > > > > > + * use EIAM and EIAC to auto-mask and auto-clear when MSI-X inte= rrupt > > > > > is asserted > > > > > + * this saves a register write for every interrupt > > > > > + */ > > > > > + intr_mask =3D 0xFFFFFFFF >> (32 - max_rx_queues); > > > > > + regval =3D E1000_READ_REG(hw, E1000_EIAC); > > > > > + E1000_WRITE_REG(hw, E1000_EIAC, regval | intr_mask); > > > > > + regval =3D E1000_READ_REG(hw, E1000_EIAM); > > > > > + E1000_WRITE_REG(hw, E1000_EIAM, regval | intr_mask); > > > > > + > > > > > + for (queue_id =3D 0; queue_id < VFIO_MAX_QUEUE_ID; queue_id++) > > > > > + eth_igb_assign_msix_vector(hw, 0, queue_id, queue_id); > > > > > + > > > > > + E1000_WRITE_FLUSH(hw); > > > > > +} > > > > > + > > > > > + > > > > > PMD_REGISTER_DRIVER(pmd_igb_drv); > > > > > PMD_REGISTER_DRIVER(pmd_igbvf_drv); > > > > > -- > > > > > 1.8.1.4