* [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration @ 2020-07-09 13:47 Lijun Ou 2020-07-15 7:14 ` Phil Yang 0 siblings, 1 reply; 7+ messages in thread From: Lijun Ou @ 2020-07-09 13:47 UTC (permalink / raw) To: wenzhuo.lu, beilei.xing, bernard.iremonger, adrien.mazarguil, ferruh.yigit Cc: dev, linuxarm When an user runs a flow create cmd to configure an RSS rule without specifying the empty rss actions in testpmd, this mean that the flow gets the default RSS functions. However, the testpmd is not set the default RSS key incorrectly when RSS key is specified in flow create cmd. Now, it uses rte_eth_dev_rss_hash_conf_get to correctly the default rss key. Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API") Cc: stable@dpdk.org Signed-off-by: Lijun Ou <oulijun@huawei.com> --- app/test-pmd/cmdline_flow.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c index 4e2006c..7eddde4 100644 --- a/app/test-pmd/cmdline_flow.c +++ b/app/test-pmd/cmdline_flow.c @@ -4168,6 +4168,7 @@ parse_vc_action_rss(struct context *ctx, const struct token *token, action_rss_data->queue[i] = i; if (!port_id_is_invalid(ctx->port, DISABLED_WARN) && ctx->port != (portid_t)RTE_PORT_ALL) { + struct rte_eth_rss_conf rss_conf = {0}; struct rte_eth_dev_info info; int ret2; @@ -4178,6 +4179,13 @@ parse_vc_action_rss(struct context *ctx, const struct token *token, action_rss_data->conf.key_len = RTE_MIN(sizeof(action_rss_data->key), info.hash_key_size); + + rss_conf.rss_key_len = sizeof(action_rss_data->key); + rss_conf.rss_key = action_rss_data->key; + ret2 = rte_eth_dev_rss_hash_conf_get(ctx->port, &rss_conf); + if (ret2 != 0) + return ret2; + action_rss_data->conf.key = rss_conf.rss_key; } action->conf = &action_rss_data->conf; return ret; -- 2.7.4 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration 2020-07-09 13:47 [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration Lijun Ou @ 2020-07-15 7:14 ` Phil Yang 2020-07-15 11:40 ` oulijun 0 siblings, 1 reply; 7+ messages in thread From: Phil Yang @ 2020-07-15 7:14 UTC (permalink / raw) To: Lijun Ou, wenzhuo.lu, beilei.xing, bernard.iremonger, adrien.mazarguil, ferruh.yigit Cc: dev, linuxarm, nd, nd > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of Lijun Ou > Sent: Thursday, July 9, 2020 9:48 PM > To: wenzhuo.lu@intel.com; beilei.xing@intel.com; > bernard.iremonger@intel.com; adrien.mazarguil@6wind.com; > ferruh.yigit@intel.com > Cc: dev@dpdk.org; linuxarm@huawei.com > Subject: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key > configuration > > When an user runs a flow create cmd to configure an RSS rule > without specifying the empty rss actions in testpmd, this mean > that the flow gets the default RSS functions. However, the > testpmd is not set the default RSS key incorrectly when RSS key > is specified in flow create cmd. Hi Lijun, I think it works. When we create an RSS flow rule which doesn't specify any 'rss-hash-key', the 'rss-hash-key' will be updated with the default key. Step 1: testpmd> show port 0 rss-hash key RSS functions: all ipv4-frag ipv4-other ipv6-frag ipv6-other ip RSS key: 4439796BB54C5023B675EA5B124F9F30B8A2C03DDFDC4D02A08C9B334AF64A4C05C6FA343958D8557D99583AE138C92E81150366 Step 2: testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end Flow rule #0 created Step 3: testpmd> show port 0 rss-hash key RSS functions: all ipv4-udp udp RSS key: 74657374706D6427732064656661756C74205253532068617368206B65792C206F7665727269646520697420666F722062657474 Thanks, Phil > > Now, it uses rte_eth_dev_rss_hash_conf_get to correctly the > default rss key. > > Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API") > Cc: stable@dpdk.org > > Signed-off-by: Lijun Ou <oulijun@huawei.com> > --- > app/test-pmd/cmdline_flow.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c > index 4e2006c..7eddde4 100644 > --- a/app/test-pmd/cmdline_flow.c > +++ b/app/test-pmd/cmdline_flow.c > @@ -4168,6 +4168,7 @@ parse_vc_action_rss(struct context *ctx, const > struct token *token, > action_rss_data->queue[i] = i; > if (!port_id_is_invalid(ctx->port, DISABLED_WARN) && > ctx->port != (portid_t)RTE_PORT_ALL) { > + struct rte_eth_rss_conf rss_conf = {0}; > struct rte_eth_dev_info info; > int ret2; > > @@ -4178,6 +4179,13 @@ parse_vc_action_rss(struct context *ctx, const > struct token *token, > action_rss_data->conf.key_len = > RTE_MIN(sizeof(action_rss_data->key), > info.hash_key_size); > + > + rss_conf.rss_key_len = sizeof(action_rss_data->key); > + rss_conf.rss_key = action_rss_data->key; > + ret2 = rte_eth_dev_rss_hash_conf_get(ctx->port, > &rss_conf); > + if (ret2 != 0) > + return ret2; > + action_rss_data->conf.key = rss_conf.rss_key; > } > action->conf = &action_rss_data->conf; > return ret; > -- > 2.7.4 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration 2020-07-15 7:14 ` Phil Yang @ 2020-07-15 11:40 ` oulijun 2020-07-17 7:29 ` Phil Yang 0 siblings, 1 reply; 7+ messages in thread From: oulijun @ 2020-07-15 11:40 UTC (permalink / raw) To: Phil Yang, wenzhuo.lu, beilei.xing, bernard.iremonger, adrien.mazarguil, ferruh.yigit Cc: dev, linuxarm, nd 在 2020/7/15 15:14, Phil Yang 写道: >> -----Original Message----- >> From: dev <dev-bounces@dpdk.org> On Behalf Of Lijun Ou >> Sent: Thursday, July 9, 2020 9:48 PM >> To: wenzhuo.lu@intel.com; beilei.xing@intel.com; >> bernard.iremonger@intel.com; adrien.mazarguil@6wind.com; >> ferruh.yigit@intel.com >> Cc: dev@dpdk.org; linuxarm@huawei.com >> Subject: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key >> configuration >> >> When an user runs a flow create cmd to configure an RSS rule >> without specifying the empty rss actions in testpmd, this mean >> that the flow gets the default RSS functions. However, the >> testpmd is not set the default RSS key incorrectly when RSS key >> is specified in flow create cmd. > > Hi Lijun, > > I think it works. > When we create an RSS flow rule which doesn't specify any 'rss-hash-key', the 'rss-hash-key' will be updated with the default key. > > Step 1: > testpmd> show port 0 rss-hash key > RSS functions: > all ipv4-frag ipv4-other ipv6-frag ipv6-other ip > RSS key: > 4439796BB54C5023B675EA5B124F9F30B8A2C03DDFDC4D02A08C9B334AF64A4C05C6FA343958D8557D99583AE138C92E81150366 > > Step 2: > testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end > Flow rule #0 created > > Step 3: > testpmd> show port 0 rss-hash key > RSS functions: > all ipv4-udp udp > RSS key: > 74657374706D6427732064656661756C74205253532068617368206B65792C206F7665727269646520697420666F722062657474 > > > Thanks, > Phil >> Yes, However, it is not the default value that users use when testpmd starts. This may mislead users. When the driver is initialized, the default key used by the driver is provided for users. The key varies according to the DPDK vendor.However, after the DPDK is initialized, if the user runs the flow create command without specifying the rss key, the driver obtains another default key value, which may be different from the default value expected by the user. Thanks Lijun Ou >> Now, it uses rte_eth_dev_rss_hash_conf_get to correctly the >> default rss key. >> >> Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API") >> Cc: stable@dpdk.org >> >> Signed-off-by: Lijun Ou <oulijun@huawei.com> >> --- >> app/test-pmd/cmdline_flow.c | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c >> index 4e2006c..7eddde4 100644 >> --- a/app/test-pmd/cmdline_flow.c >> +++ b/app/test-pmd/cmdline_flow.c >> @@ -4168,6 +4168,7 @@ parse_vc_action_rss(struct context *ctx, const >> struct token *token, >> action_rss_data->queue[i] = i; >> if (!port_id_is_invalid(ctx->port, DISABLED_WARN) && >> ctx->port != (portid_t)RTE_PORT_ALL) { >> + struct rte_eth_rss_conf rss_conf = {0}; >> struct rte_eth_dev_info info; >> int ret2; >> >> @@ -4178,6 +4179,13 @@ parse_vc_action_rss(struct context *ctx, const >> struct token *token, >> action_rss_data->conf.key_len = >> RTE_MIN(sizeof(action_rss_data->key), >> info.hash_key_size); >> + >> + rss_conf.rss_key_len = sizeof(action_rss_data->key); >> + rss_conf.rss_key = action_rss_data->key; >> + ret2 = rte_eth_dev_rss_hash_conf_get(ctx->port, >> &rss_conf); >> + if (ret2 != 0) >> + return ret2; >> + action_rss_data->conf.key = rss_conf.rss_key; >> } >> action->conf = &action_rss_data->conf; >> return ret; >> -- >> 2.7.4 > > > . > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration 2020-07-15 11:40 ` oulijun @ 2020-07-17 7:29 ` Phil Yang 2020-08-04 1:28 ` oulijun 0 siblings, 1 reply; 7+ messages in thread From: Phil Yang @ 2020-07-17 7:29 UTC (permalink / raw) To: oulijun, wenzhuo.lu, beilei.xing, bernard.iremonger, adrien.mazarguil, ferruh.yigit Cc: dev, linuxarm, nd, nd <snip> > >> Subject: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key > >> configuration > >> > >> When an user runs a flow create cmd to configure an RSS rule > >> without specifying the empty rss actions in testpmd, this mean > >> that the flow gets the default RSS functions. However, the > >> testpmd is not set the default RSS key incorrectly when RSS key > >> is specified in flow create cmd. > > > > Hi Lijun, > > > > I think it works. > > When we create an RSS flow rule which doesn't specify any 'rss-hash-key', > the 'rss-hash-key' will be updated with the default key. > > > > Step 1: > > testpmd> show port 0 rss-hash key > > RSS functions: > > all ipv4-frag ipv4-other ipv6-frag ipv6-other ip > > RSS key: > > > 4439796BB54C5023B675EA5B124F9F30B8A2C03DDFDC4D02A08C9B334AF64A4 > C05C6FA343958D8557D99583AE138C92E81150366 > > > > Step 2: > > testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss > types ipv4-udp end queues end / end > > Flow rule #0 created > > > > Step 3: > > testpmd> show port 0 rss-hash key > > RSS functions: > > all ipv4-udp udp > > RSS key: > > > 74657374706D6427732064656661756C74205253532068617368206B65792C206F > 7665727269646520697420666F722062657474 > > > > > > Thanks, > > Phil > >> > Yes, However, it is not the default value that users use when testpmd > starts. This may mislead users. When the driver is initialized, the > default key used by the driver is provided for users. The key varies > according to the DPDK vendor.However, after the DPDK is initialized, if > the user runs the flow create command without specifying the rss key, > the driver obtains another default key value, which may be different > from the default value expected by the user. It needs a dummy key. a4391f8bae85 - app/testpmd: set default RSS key as null ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration 2020-07-17 7:29 ` Phil Yang @ 2020-08-04 1:28 ` oulijun 2020-08-04 9:36 ` Phil Yang 0 siblings, 1 reply; 7+ messages in thread From: oulijun @ 2020-08-04 1:28 UTC (permalink / raw) To: Phil Yang, wenzhuo.lu, beilei.xing, bernard.iremonger, adrien.mazarguil, ferruh.yigit Cc: dev, linuxarm, nd 在 2020/7/17 15:29, Phil Yang 写道: > <snip> > >>>> Subject: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key >>>> configuration >>>> >>>> When an user runs a flow create cmd to configure an RSS rule >>>> without specifying the empty rss actions in testpmd, this mean >>>> that the flow gets the default RSS functions. However, the >>>> testpmd is not set the default RSS key incorrectly when RSS key >>>> is specified in flow create cmd. >>> Hi Lijun, >>> >>> I think it works. >>> When we create an RSS flow rule which doesn't specify any 'rss-hash-key', >> the 'rss-hash-key' will be updated with the default key. >>> Step 1: >>> testpmd> show port 0 rss-hash key >>> RSS functions: >>> all ipv4-frag ipv4-other ipv6-frag ipv6-other ip >>> RSS key: >>> >> 4439796BB54C5023B675EA5B124F9F30B8A2C03DDFDC4D02A08C9B334AF64A4 >> C05C6FA343958D8557D99583AE138C92E81150366 >>> Step 2: >>> testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss >> types ipv4-udp end queues end / end >>> Flow rule #0 created >>> >>> Step 3: >>> testpmd> show port 0 rss-hash key >>> RSS functions: >>> all ipv4-udp udp >>> RSS key: >>> >> 74657374706D6427732064656661756C74205253532068617368206B65792C206F >> 7665727269646520697420666F722062657474 >>> >>> Thanks, >>> Phil >> Yes, However, it is not the default value that users use when testpmd >> starts. This may mislead users. When the driver is initialized, the >> default key used by the driver is provided for users. The key varies >> according to the DPDK vendor.However, after the DPDK is initialized, if >> the user runs the flow create command without specifying the rss key, >> the driver obtains another default key value, which may be different >> from the default value expected by the user. > It needs a dummy key. > a4391f8bae85 - app/testpmd: set default RSS key as null Hi, Phil Yang Yes, I've reviewed the patch("a4391f8bae85 - app/testpmd: set default RSS key as null") and read all other people's comments. However, the patch has been reverted in V2 and restored to the orginal states. The link as follows: https://patches.dpdk.org/patch/47961/ I also don't think the key_len parameter is very profitable for users to configure. Others say that other optimizations will be considered later. Do you have any plans? Best regards, Liju Ou > > > . > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration 2020-08-04 1:28 ` oulijun @ 2020-08-04 9:36 ` Phil Yang 2020-08-18 3:54 ` oulijun 0 siblings, 1 reply; 7+ messages in thread From: Phil Yang @ 2020-08-04 9:36 UTC (permalink / raw) To: oulijun, wenzhuo.lu, beilei.xing, bernard.iremonger, adrien.mazarguil, ferruh.yigit Cc: dev, linuxarm, nd, nd > -----Original Message----- > From: oulijun <oulijun@huawei.com> > Sent: Tuesday, August 4, 2020 9:29 AM > To: Phil Yang <Phil.Yang@arm.com>; wenzhuo.lu@intel.com; > beilei.xing@intel.com; bernard.iremonger@intel.com; > adrien.mazarguil@6wind.com; ferruh.yigit@intel.com > Cc: dev@dpdk.org; linuxarm@huawei.com; nd <nd@arm.com> > Subject: Re: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key > configuration > > > > 在 2020/7/17 15:29, Phil Yang 写道: > > <snip> > > > >>>> Subject: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key > >>>> configuration > >>>> > >>>> When an user runs a flow create cmd to configure an RSS rule > >>>> without specifying the empty rss actions in testpmd, this mean > >>>> that the flow gets the default RSS functions. However, the > >>>> testpmd is not set the default RSS key incorrectly when RSS key > >>>> is specified in flow create cmd. > >>> Hi Lijun, > >>> > >>> I think it works. > >>> When we create an RSS flow rule which doesn't specify any 'rss-hash- > key', > >> the 'rss-hash-key' will be updated with the default key. > >>> Step 1: > >>> testpmd> show port 0 rss-hash key > >>> RSS functions: > >>> all ipv4-frag ipv4-other ipv6-frag ipv6-other ip > >>> RSS key: > >>> > >> > 4439796BB54C5023B675EA5B124F9F30B8A2C03DDFDC4D02A08C9B334AF64A4 > >> C05C6FA343958D8557D99583AE138C92E81150366 > >>> Step 2: > >>> testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss > >> types ipv4-udp end queues end / end > >>> Flow rule #0 created > >>> > >>> Step 3: > >>> testpmd> show port 0 rss-hash key > >>> RSS functions: > >>> all ipv4-udp udp > >>> RSS key: > >>> > >> > 74657374706D6427732064656661756C74205253532068617368206B65792C206F > >> 7665727269646520697420666F722062657474 > >>> > >>> Thanks, > >>> Phil > >> Yes, However, it is not the default value that users use when testpmd > >> starts. This may mislead users. When the driver is initialized, the > >> default key used by the driver is provided for users. The key varies > >> according to the DPDK vendor.However, after the DPDK is initialized, if > >> the user runs the flow create command without specifying the rss key, > >> the driver obtains another default key value, which may be different > >> from the default value expected by the user. > > It needs a dummy key. > > a4391f8bae85 - app/testpmd: set default RSS key as null > Hi, Phil Yang > Yes, I've reviewed the patch("a4391f8bae85 - app/testpmd: set > default RSS key as null") and read all other people's comments. > However, the patch has been reverted in V2 and restored to the orginal > states. The link as follows: > https://patches.dpdk.org/patch/47961/ I got your point now. Your patch makes testpmd using the valid NIC default RSS hash key as the flow rule default RSS, is that right? The patch looks good to me. Please fix the typo in your commit message and make it more accurate. For example, you can put the cmd line and the expected output in the commit message. > I also don't think the key_len parameter is very profitable > for users to configure. Others say that other optimizations will be > considered later. Do you have any plans? I have no plans for it now. Thanks, Phil ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration 2020-08-04 9:36 ` Phil Yang @ 2020-08-18 3:54 ` oulijun 0 siblings, 0 replies; 7+ messages in thread From: oulijun @ 2020-08-18 3:54 UTC (permalink / raw) To: Phil Yang, wenzhuo.lu, beilei.xing, bernard.iremonger, adrien.mazarguil, ferruh.yigit Cc: dev, linuxarm, nd 在 2020/8/4 17:36, Phil Yang 写道: >> -----Original Message----- >> From: oulijun <oulijun@huawei.com> >> Sent: Tuesday, August 4, 2020 9:29 AM >> To: Phil Yang <Phil.Yang@arm.com>; wenzhuo.lu@intel.com; >> beilei.xing@intel.com; bernard.iremonger@intel.com; >> adrien.mazarguil@6wind.com; ferruh.yigit@intel.com >> Cc: dev@dpdk.org; linuxarm@huawei.com; nd <nd@arm.com> >> Subject: Re: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key >> configuration >> >> >> >> 在 2020/7/17 15:29, Phil Yang 写道: >>> <snip> >>> >>>>>> Subject: [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key >>>>>> configuration >>>>>> >>>>>> When an user runs a flow create cmd to configure an RSS rule >>>>>> without specifying the empty rss actions in testpmd, this mean >>>>>> that the flow gets the default RSS functions. However, the >>>>>> testpmd is not set the default RSS key incorrectly when RSS key >>>>>> is specified in flow create cmd. >>>>> Hi Lijun, >>>>> >>>>> I think it works. >>>>> When we create an RSS flow rule which doesn't specify any 'rss-hash- >> key', >>>> the 'rss-hash-key' will be updated with the default key. >>>>> Step 1: >>>>> testpmd> show port 0 rss-hash key >>>>> RSS functions: >>>>> all ipv4-frag ipv4-other ipv6-frag ipv6-other ip >>>>> RSS key: >>>>> >>>> >> 4439796BB54C5023B675EA5B124F9F30B8A2C03DDFDC4D02A08C9B334AF64A4 >>>> C05C6FA343958D8557D99583AE138C92E81150366 >>>>> Step 2: >>>>> testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss >>>> types ipv4-udp end queues end / end >>>>> Flow rule #0 created >>>>> >>>>> Step 3: >>>>> testpmd> show port 0 rss-hash key >>>>> RSS functions: >>>>> all ipv4-udp udp >>>>> RSS key: >>>>> >>>> >> 74657374706D6427732064656661756C74205253532068617368206B65792C206F >>>> 7665727269646520697420666F722062657474 >>>>> >>>>> Thanks, >>>>> Phil >>>> Yes, However, it is not the default value that users use when testpmd >>>> starts. This may mislead users. When the driver is initialized, the >>>> default key used by the driver is provided for users. The key varies >>>> according to the DPDK vendor.However, after the DPDK is initialized, if >>>> the user runs the flow create command without specifying the rss key, >>>> the driver obtains another default key value, which may be different >>>> from the default value expected by the user. >>> It needs a dummy key. >>> a4391f8bae85 - app/testpmd: set default RSS key as null >> Hi, Phil Yang >> Yes, I've reviewed the patch("a4391f8bae85 - app/testpmd: set >> default RSS key as null") and read all other people's comments. >> However, the patch has been reverted in V2 and restored to the orginal >> states. The link as follows: >> https://patches.dpdk.org/patch/47961/ > > I got your point now. > Your patch makes testpmd using the valid NIC default RSS hash key as the flow rule default RSS, is that right? > Yes. Recently, I've been further testing the patch. I found the other question. When I create a flow with RSS by used the following cmd. testpmd>flow create 0 ingress pattern end actions rss types ipv4-tcp end / end next, I run flow flush 0 and re-create a flow with RSS testpmd> flow flush 0 testpmd> flow create 0 ingress pattern end actions rss types ipv4-tcp end As a result, the key is 0 by show port rss-hash key because it needs to memset 0 for rss_info when flush Thanks Lijun Ou > The patch looks good to me. Please fix the typo in your commit message and make it more accurate. > For example, you can put the cmd line and the expected output in the commit message. > >> I also don't think the key_len parameter is very profitable >> for users to configure. Others say that other optimizations will be >> considered later. Do you have any plans? > > I have no plans for it now. > > Thanks, > Phil > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-08-18 3:54 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-09 13:47 [dpdk-dev] [PATCH] app/testpmd: fix the default RSS key configuration Lijun Ou 2020-07-15 7:14 ` Phil Yang 2020-07-15 11:40 ` oulijun 2020-07-17 7:29 ` Phil Yang 2020-08-04 1:28 ` oulijun 2020-08-04 9:36 ` Phil Yang 2020-08-18 3:54 ` oulijun
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).