From: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
To: dev@dpdk.org
Cc: Felix Marti <felix@chelsio.com>,
Kumar Sanghvi <kumaras@chelsio.com>,
Nirranjan Kirubaharan <nirranjan@chelsio.com>
Subject: [dpdk-dev] [PATCH v3 8/9] cxgbe: add flow control functions for cxgbe PMD.
Date: Thu, 18 Jun 2015 17:47:10 +0530 [thread overview]
Message-ID: <3d907874e087bc5517d6c0c96c29cf3815efe8dd.1434628361.git.rahul.lakkireddy@chelsio.com> (raw)
In-Reply-To: <cover.1434628361.git.rahul.lakkireddy@chelsio.com>
In-Reply-To: <cover.1434628361.git.rahul.lakkireddy@chelsio.com>
Adds flow control related eth_dev_ops for cxgbe poll mode driver.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
---
v3:
- No changes.
v2:
- This patch is a subset of patch 2/5 submitted in v1.
drivers/net/cxgbe/cxgbe_ethdev.c | 54 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/net/cxgbe/cxgbe_ethdev.c b/drivers/net/cxgbe/cxgbe_ethdev.c
index c0dd5f3..478051a 100644
--- a/drivers/net/cxgbe/cxgbe_ethdev.c
+++ b/drivers/net/cxgbe/cxgbe_ethdev.c
@@ -642,6 +642,58 @@ static void cxgbe_dev_stats_reset(struct rte_eth_dev *eth_dev)
}
}
+static int cxgbe_flow_ctrl_get(struct rte_eth_dev *eth_dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct port_info *pi = (struct port_info *)(eth_dev->data->dev_private);
+ struct link_config *lc = &pi->link_cfg;
+ int rx_pause, tx_pause;
+
+ fc_conf->autoneg = lc->fc & PAUSE_AUTONEG;
+ rx_pause = lc->fc & PAUSE_RX;
+ tx_pause = lc->fc & PAUSE_TX;
+
+ if (rx_pause && tx_pause)
+ fc_conf->mode = RTE_FC_FULL;
+ else if (rx_pause)
+ fc_conf->mode = RTE_FC_RX_PAUSE;
+ else if (tx_pause)
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ else
+ fc_conf->mode = RTE_FC_NONE;
+ return 0;
+}
+
+static int cxgbe_flow_ctrl_set(struct rte_eth_dev *eth_dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct port_info *pi = (struct port_info *)(eth_dev->data->dev_private);
+ struct adapter *adapter = pi->adapter;
+ struct link_config *lc = &pi->link_cfg;
+
+ if (lc->supported & FW_PORT_CAP_ANEG) {
+ if (fc_conf->autoneg)
+ lc->requested_fc |= PAUSE_AUTONEG;
+ else
+ lc->requested_fc &= ~PAUSE_AUTONEG;
+ }
+
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_RX_PAUSE))
+ lc->requested_fc |= PAUSE_RX;
+ else
+ lc->requested_fc &= ~PAUSE_RX;
+
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_TX_PAUSE))
+ lc->requested_fc |= PAUSE_TX;
+ else
+ lc->requested_fc &= ~PAUSE_TX;
+
+ return t4_link_l1cfg(adapter, adapter->mbox, pi->tx_chan,
+ &pi->link_cfg);
+}
+
static struct eth_dev_ops cxgbe_eth_dev_ops = {
.dev_start = cxgbe_dev_start,
.dev_stop = cxgbe_dev_stop,
@@ -663,6 +715,8 @@ static struct eth_dev_ops cxgbe_eth_dev_ops = {
.rx_queue_release = cxgbe_dev_rx_queue_release,
.stats_get = cxgbe_dev_stats_get,
.stats_reset = cxgbe_dev_stats_reset,
+ .flow_ctrl_get = cxgbe_flow_ctrl_get,
+ .flow_ctrl_set = cxgbe_flow_ctrl_set,
};
/*
--
2.4.1
next prev parent reply other threads:[~2015-06-18 12:19 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 13:24 [dpdk-dev] [PATCH 0/5] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-05-22 13:24 ` [dpdk-dev] [PATCH 1/5] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-05-22 13:24 ` [dpdk-dev] [PATCH 2/5] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-05-22 16:42 ` Stephen Hemminger
2015-05-23 5:57 ` Rahul Lakkireddy
2015-05-26 17:02 ` Rahul Lakkireddy
2015-05-26 17:24 ` Stephen Hemminger
2015-05-26 18:13 ` Rahul Lakkireddy
2015-05-22 16:43 ` Stephen Hemminger
2015-05-23 5:56 ` Rahul Lakkireddy
2015-05-22 16:46 ` Stephen Hemminger
2015-05-23 5:53 ` Rahul Lakkireddy
2015-05-27 5:49 ` Thomas Monjalon
2015-05-27 11:26 ` Rahul Lakkireddy
2015-05-22 13:24 ` [dpdk-dev] [PATCH 3/5] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-05-27 5:38 ` Thomas Monjalon
2015-05-27 11:24 ` Rahul Lakkireddy
2015-05-22 13:24 ` [dpdk-dev] [PATCH 4/5] config: enable cxgbe PMD for compilation and linking Rahul Lakkireddy
2015-05-22 13:24 ` [dpdk-dev] [PATCH 5/5] maintainers: claim responsibility for cxgbe PMD Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 00/11] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 01/11] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 02/11] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-17 12:30 ` Thomas Monjalon
2015-06-18 7:06 ` Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 03/11] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 04/11] cxgbe: add TX " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 05/11] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 06/11] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 07/11] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 08/11] cxgbe: add flow control " Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 09/11] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 10/11] config: enable cxgbe PMD for compilation and linking Rahul Lakkireddy
2015-06-01 17:30 ` [dpdk-dev] [PATCH v2 11/11] maintainers: claim responsibility for cxgbe PMD Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 1/9] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 2/9] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-28 19:32 ` Thomas Monjalon
2015-06-29 23:23 ` Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 3/9] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-28 19:34 ` Thomas Monjalon
2015-06-29 23:18 ` Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 4/9] cxgbe: add TX " Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 5/9] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 6/9] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 7/9] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-18 12:17 ` Rahul Lakkireddy [this message]
2015-06-18 12:17 ` [dpdk-dev] [PATCH v3 9/9] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-18 13:47 ` Mcnamara, John
2015-06-18 13:44 ` [dpdk-dev] [PATCH v3 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Mcnamara, John
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 1/9] cxgbe: add hardware specific api for all supported Chelsio T5 series adapters Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 2/9] cxgbe: add cxgbe poll mode driver Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 3/9] cxgbe: add device configuration and RX support for cxgbe PMD Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 4/9] cxgbe: add TX " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 5/9] cxgbe: add device related operations " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 6/9] cxgbe: add port statistics " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 7/9] cxgbe: add link related functions " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 8/9] cxgbe: add flow control " Rahul Lakkireddy
2015-06-29 23:28 ` [dpdk-dev] [PATCH v4 9/9] doc: add cxgbe PMD documentation under doc/guides/nics/cxgbe.rst Rahul Lakkireddy
2015-06-30 21:01 ` [dpdk-dev] [PATCH v4 0/9] Chelsio Terminator 5 (T5) 10G/40G Poll Mode Driver Thomas Monjalon
2015-07-01 6:35 ` Rahul Lakkireddy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d907874e087bc5517d6c0c96c29cf3815efe8dd.1434628361.git.rahul.lakkireddy@chelsio.com \
--to=rahul.lakkireddy@chelsio.com \
--cc=dev@dpdk.org \
--cc=felix@chelsio.com \
--cc=kumaras@chelsio.com \
--cc=nirranjan@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).