DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
@ 2021-05-26  1:51 Truring Team
  2021-05-26  4:13 ` [dpdk-dev] [dpdk-users] " Nishant Verma
  0 siblings, 1 reply; 7+ messages in thread
From: Truring Team @ 2021-05-26  1:51 UTC (permalink / raw)
  To: dev, users

Hi Team,

I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
Controller but facing following issues:

If someone can look into the following logs and help me figure out the
issue?



1. DPDK 20.11 ( Using 1 GB hugepages)

   gdb ./dpdk-testpmd

12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7

12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.

12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
http://gnu.org/licenses/gpl.html

12:45:59.349 §This is free software: you are free to change and
redistribute it.

12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.  Type
"show copying"

12:45:59.349 §and "show warranty" for details.

12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".

12:45:59.351 §For bug reporting instructions, please see:

12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...

12:45:59.415 §Reading symbols from
/home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols
found)...done.

12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i

12:46:11.493 §Starting program:
/home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i

12:46:11.717 §[Thread debugging using libthread_db enabled]

12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1".

12:46:11.768 §EAL: Detected 6 lcore(s)

12:46:11.769 §EAL: Detected 1 NUMA nodes

12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]

12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket

12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]

12:46:11.792 §EAL: Selected IOVA mode 'PA'

12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB

12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB

12:46:11.854 §EAL: Probing VFIO support...

12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]

12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]

12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]

12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]

12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]

12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
0000:65:00.0 (socket 0)

12:46:11.915 §

12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.

12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()

12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
zlib-1.2.7-19.el7_9.x86_64

12:46:14.542 §(gdb) bt

12:46:14.548 §#0  0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()

12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()

12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()

12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()

12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()

12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()

12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()

12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()

12:46:14.617 §#8  0x0000000000425db1 in main ()

12:46:17.052 §(gdb) quit

12:46:17.056 §A debugging session is active.

12:46:17.056 §

12:46:17.057 §        Inferior 1 [process 23180] will be killed.





2. *DPDK 21.05:*

   ./dpdk-testpmd -l 0-5 -n4 -- -i

12:46:46.257 §EAL: Detected 6 lcore(s)

12:46:46.257 §EAL: Detected 1 NUMA nodes

12:46:46.258 §EAL: Detected static linkage of DPDK

12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket

12:46:46.285 §EAL: Selected IOVA mode 'PA'

12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0

12:46:46.288 §EAL: No available 2048 kB hugepages reported

12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
0000:65:00.0 (socket 0)

12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP
scratch-pad is not configured

12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized

12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized!

12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
initialized

12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
information

12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed

12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
failed rc -3

12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used

12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created

12:46:46.423 §testpmd: No probed ethernet devices

12:46:46.461 §Interactive-mode selected

12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
size=2176, socket=0

12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc

12:46:46.540 §Done





System Information:

*ethtool -i p2p1*
driver: qede
version: 8.33.0.20
*firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
expansion-rom-version:
bus-info: 0000:65:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: yes



*ethtool -i p2p2 *driver: qede
version: 8.33.0.20
firmware-version: mfw 8.24.44.0 storm 8.33.11.0
expansion-rom-version:
bus-info: 0000:65:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: yes





*lspci -nn | grep Ether*

12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]

12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]

12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)

12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)



cd /lib/firmware/qed/

ls

12:48:27.269 §qed_init_values-8.10.9.0.bin
qed_init_values-8.30.12.0.bin         qed_init_values_zipped-8.10.5.0.bin
qed_init_values_zipped-8.33.11.0.bin  qed_init_values_zipped-8.7.3.0.bin

12:48:27.272 §qed_init_values-8.14.6.0.bin
qed_init_values-8.33.12.0.bin         qed_init_values_zipped-8.15.3.0.bin
qed_init_values_zipped-8.37.2.0.bin

12:48:27.273 §qed_init_values-8.18.9.0.bin
qed_init_values-8.40.33.0.bin         qed_init_values_zipped-8.20.0.0.bin
qed_init_values_zipped-8.37.7.0.bin

12:48:27.275 §qed_init_values-8.20.0.0.bin
qed_init_values_zipped-8.10.10.0.bin  qed_init_values_zipped-8.33.1.0.bin
qed_init_values_zipped-8.4.2.0.bin


Best Regards

Puneet

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
  2021-05-26  1:51 [dpdk-dev] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 Truring Team
@ 2021-05-26  4:13 ` Nishant Verma
  2021-05-26  4:20   ` Truring Team
  0 siblings, 1 reply; 7+ messages in thread
From: Nishant Verma @ 2021-05-26  4:13 UTC (permalink / raw)
  To: Truring Team; +Cc: dev, USERS

Can you paste output of /proc/meminfo ?



Regards,
NV

On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> wrote:

> Hi Team,
>
> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
> Controller but facing following issues:
>
> If someone can look into the following logs and help me figure out the
> issue?
>
>
>
> 1. DPDK 20.11 ( Using 1 GB hugepages)
>
>    gdb ./dpdk-testpmd
>
> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>
> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>
> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
> http://gnu.org/licenses/gpl.html
>
> 12:45:59.349 §This is free software: you are free to change and
> redistribute it.
>
> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.  Type
> "show copying"
>
> 12:45:59.349 §and "show warranty" for details.
>
> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>
> 12:45:59.351 §For bug reporting instructions, please see:
>
> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
>
> 12:45:59.415 §Reading symbols from
> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols
> found)...done.
>
> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>
> 12:46:11.493 §Starting program:
> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i
>
> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>
> 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1".
>
> 12:46:11.768 §EAL: Detected 6 lcore(s)
>
> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>
> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>
> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>
> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>
> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>
> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>
> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
>
> 12:46:11.854 §EAL: Probing VFIO support...
>
> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>
> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>
> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>
> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>
> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>
> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
> 0000:65:00.0 (socket 0)
>
> 12:46:11.915 §
>
> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>
> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>
> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
> zlib-1.2.7-19.el7_9.x86_64
>
> 12:46:14.542 §(gdb) bt
>
> 12:46:14.548 §#0  0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>
> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
>
> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
>
> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
>
> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>
> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
>
> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
>
> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
>
> 12:46:14.617 §#8  0x0000000000425db1 in main ()
>
> 12:46:17.052 §(gdb) quit
>
> 12:46:17.056 §A debugging session is active.
>
> 12:46:17.056 §
>
> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
>
>
>
>
>
> 2. *DPDK 21.05:*
>
>    ./dpdk-testpmd -l 0-5 -n4 -- -i
>
> 12:46:46.257 §EAL: Detected 6 lcore(s)
>
> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>
> 12:46:46.258 §EAL: Detected static linkage of DPDK
>
> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>
> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>
> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>
> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>
> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
> 0000:65:00.0 (socket 0)
>
> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP
> scratch-pad is not configured
>
> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
>
> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized!
>
> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
> initialized
>
> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
> information
>
> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>
> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
> failed rc -3
>
> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>
> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created
>
> 12:46:46.423 §testpmd: No probed ethernet devices
>
> 12:46:46.461 §Interactive-mode selected
>
> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
> size=2176, socket=0
>
> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>
> 12:46:46.540 §Done
>
>
>
>
>
> System Information:
>
> *ethtool -i p2p1*
> driver: qede
> version: 8.33.0.20
> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
> expansion-rom-version:
> bus-info: 0000:65:00.0
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: no
> supports-register-dump: yes
> supports-priv-flags: yes
>
>
>
> *ethtool -i p2p2 *driver: qede
> version: 8.33.0.20
> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
> expansion-rom-version:
> bus-info: 0000:65:00.1
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: no
> supports-register-dump: yes
> supports-priv-flags: yes
>
>
>
>
>
> *lspci -nn | grep Ether*
>
> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>
> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>
> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>
> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>
>
>
> cd /lib/firmware/qed/
>
> ls
>
> 12:48:27.269 §qed_init_values-8.10.9.0.bin
> qed_init_values-8.30.12.0.bin         qed_init_values_zipped-8.10.5.0.bin
> qed_init_values_zipped-8.33.11.0.bin  qed_init_values_zipped-8.7.3.0.bin
>
> 12:48:27.272 §qed_init_values-8.14.6.0.bin
> qed_init_values-8.33.12.0.bin         qed_init_values_zipped-8.15.3.0.bin
> qed_init_values_zipped-8.37.2.0.bin
>
> 12:48:27.273 §qed_init_values-8.18.9.0.bin
> qed_init_values-8.40.33.0.bin         qed_init_values_zipped-8.20.0.0.bin
> qed_init_values_zipped-8.37.7.0.bin
>
> 12:48:27.275 §qed_init_values-8.20.0.0.bin
> qed_init_values_zipped-8.10.10.0.bin  qed_init_values_zipped-8.33.1.0.bin
> qed_init_values_zipped-8.4.2.0.bin
>
>
> Best Regards
>
> Puneet
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
  2021-05-26  4:13 ` [dpdk-dev] [dpdk-users] " Nishant Verma
@ 2021-05-26  4:20   ` Truring Team
  2021-05-26  4:35     ` Nishant Verma
  0 siblings, 1 reply; 7+ messages in thread
From: Truring Team @ 2021-05-26  4:20 UTC (permalink / raw)
  To: Nishant Verma; +Cc: dev, USERS

Hi Nishant,

cat /proc/meminfo
11:59:29.200 §MemTotal:       23101672 kB
11:59:29.200 §MemFree:        15254764 kB
11:59:29.200 §MemAvailable:   19243184 kB
11:59:29.200 §Buffers:            6792 kB
11:59:29.201 §Cached:          4084844 kB
11:59:29.201 §SwapCached:            0 kB
11:59:29.201 §Active:          3609016 kB
11:59:29.201 §Inactive:        1175160 kB
11:59:29.201 §Active(anon):     695644 kB
11:59:29.202 §Inactive(anon):    19716 kB
11:59:29.202 §Active(file):    2913372 kB
11:59:29.202 §Inactive(file):  1155444 kB
11:59:29.202 §Unevictable:           0 kB
11:59:29.202 §Mlocked:               0 kB
11:59:29.203 §SwapTotal:      11665404 kB
11:59:29.204 §SwapFree:       11665404 kB
11:59:29.204 §Dirty:                32 kB
11:59:29.204 §Writeback:             0 kB
11:59:29.204 §AnonPages:        694764 kB
11:59:29.205 §Mapped:           140220 kB
11:59:29.205 §Shmem:             22800 kB
11:59:29.205 §Slab:             445016 kB
11:59:29.205 §SReclaimable:     289968 kB
11:59:29.205 §SUnreclaim:       155048 kB
11:59:29.206 §KernelStack:       16624 kB
11:59:29.206 §PageTables:        35892 kB
11:59:29.206 §NFS_Unstable:          0 kB
11:59:29.206 §Bounce:                0 kB
11:59:29.206 §WritebackTmp:          0 kB
11:59:29.207 §CommitLimit:    22167664 kB
11:59:29.207 §Committed_AS:    4342668 kB
11:59:29.207 §VmallocTotal:   34359738367 kB
11:59:29.207 §VmallocUsed:      463188 kB
11:59:29.207 §VmallocChunk:   34358835196 kB
11:59:29.208 §HardwareCorrupted:     0 kB
11:59:29.208 §AnonHugePages:    329728 kB
11:59:29.208 §CmaTotal:              0 kB
11:59:29.209 §CmaFree:               0 kB
11:59:29.209 §HugePages_Total:    1024
11:59:29.209 §HugePages_Free:     1019
11:59:29.209 §HugePages_Rsvd:        0
11:59:29.209 §HugePages_Surp:        0
11:59:29.209 §Hugepagesize:       2048 kB
11:59:29.209 §DirectMap4k:      381760 kB
11:59:29.209 §DirectMap2M:    13973504 kB
11:59:29.215 §DirectMap1G:    11534336 kB

Regards


On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote:

> Can you paste output of /proc/meminfo ?
>
>
>
> Regards,
> NV
>
> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> wrote:
>
>> Hi Team,
>>
>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
>> Controller but facing following issues:
>>
>> If someone can look into the following logs and help me figure out the
>> issue?
>>
>>
>>
>> 1. DPDK 20.11 ( Using 1 GB hugepages)
>>
>>    gdb ./dpdk-testpmd
>>
>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>>
>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>>
>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
>> http://gnu.org/licenses/gpl.html
>>
>> 12:45:59.349 §This is free software: you are free to change and
>> redistribute it.
>>
>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.  Type
>> "show copying"
>>
>> 12:45:59.349 §and "show warranty" for details.
>>
>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>>
>> 12:45:59.351 §For bug reporting instructions, please see:
>>
>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
>>
>> 12:45:59.415 §Reading symbols from
>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols
>> found)...done.
>>
>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>>
>> 12:46:11.493 §Starting program:
>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i
>>
>> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>>
>> 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1".
>>
>> 12:46:11.768 §EAL: Detected 6 lcore(s)
>>
>> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>>
>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>>
>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>
>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>>
>> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>>
>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>>
>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
>>
>> 12:46:11.854 §EAL: Probing VFIO support...
>>
>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>>
>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>>
>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>>
>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>>
>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>>
>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>> 0000:65:00.0 (socket 0)
>>
>> 12:46:11.915 §
>>
>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>>
>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>
>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
>> zlib-1.2.7-19.el7_9.x86_64
>>
>> 12:46:14.542 §(gdb) bt
>>
>> 12:46:14.548 §#0  0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>
>> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
>>
>> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
>>
>> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
>>
>> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>>
>> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
>>
>> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
>>
>> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
>>
>> 12:46:14.617 §#8  0x0000000000425db1 in main ()
>>
>> 12:46:17.052 §(gdb) quit
>>
>> 12:46:17.056 §A debugging session is active.
>>
>> 12:46:17.056 §
>>
>> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
>>
>>
>>
>>
>>
>> 2. *DPDK 21.05:*
>>
>>    ./dpdk-testpmd -l 0-5 -n4 -- -i
>>
>> 12:46:46.257 §EAL: Detected 6 lcore(s)
>>
>> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>>
>> 12:46:46.258 §EAL: Detected static linkage of DPDK
>>
>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>
>> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>>
>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>>
>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>>
>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>> 0000:65:00.0 (socket 0)
>>
>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP
>> scratch-pad is not configured
>>
>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
>>
>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not
>> initialized!
>>
>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
>> initialized
>>
>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
>> information
>>
>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>>
>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
>> failed rc -3
>>
>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>>
>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created
>>
>> 12:46:46.423 §testpmd: No probed ethernet devices
>>
>> 12:46:46.461 §Interactive-mode selected
>>
>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
>> size=2176, socket=0
>>
>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>>
>> 12:46:46.540 §Done
>>
>>
>>
>>
>>
>> System Information:
>>
>> *ethtool -i p2p1*
>> driver: qede
>> version: 8.33.0.20
>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
>> expansion-rom-version:
>> bus-info: 0000:65:00.0
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: no
>> supports-register-dump: yes
>> supports-priv-flags: yes
>>
>>
>>
>> *ethtool -i p2p2 *driver: qede
>> version: 8.33.0.20
>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
>> expansion-rom-version:
>> bus-info: 0000:65:00.1
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: no
>> supports-register-dump: yes
>> supports-priv-flags: yes
>>
>>
>>
>>
>>
>> *lspci -nn | grep Ether*
>>
>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>
>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>
>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>
>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>
>>
>>
>> cd /lib/firmware/qed/
>>
>> ls
>>
>> 12:48:27.269 §qed_init_values-8.10.9.0.bin
>> qed_init_values-8.30.12.0.bin         qed_init_values_zipped-8.10.5.0.bin
>> qed_init_values_zipped-8.33.11.0.bin  qed_init_values_zipped-8.7.3.0.bin
>>
>> 12:48:27.272 §qed_init_values-8.14.6.0.bin
>> qed_init_values-8.33.12.0.bin         qed_init_values_zipped-8.15.3.0.bin
>> qed_init_values_zipped-8.37.2.0.bin
>>
>> 12:48:27.273 §qed_init_values-8.18.9.0.bin
>> qed_init_values-8.40.33.0.bin         qed_init_values_zipped-8.20.0.0.bin
>> qed_init_values_zipped-8.37.7.0.bin
>>
>> 12:48:27.275 §qed_init_values-8.20.0.0.bin
>> qed_init_values_zipped-8.10.10.0.bin  qed_init_values_zipped-8.33.1.0.bin
>> qed_init_values_zipped-8.4.2.0.bin
>>
>>
>> Best Regards
>>
>> Puneet
>>
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
  2021-05-26  4:20   ` Truring Team
@ 2021-05-26  4:35     ` Nishant Verma
  2021-05-26  4:41       ` Truring Team
  0 siblings, 1 reply; 7+ messages in thread
From: Nishant Verma @ 2021-05-26  4:35 UTC (permalink / raw)
  To: Truring Team; +Cc: dev, USERS

meminfo states: Hugepagesize:    1048576 kB
But  in your initial mail you state Hugepage size is 1G.

have you configured HugePage via grub.... ?


Thanks.

Regards,
NV

On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com> wrote:

> Hi Nishant,
>
> cat /proc/meminfo
> 11:59:29.200 §MemTotal:       23101672 kB
> 11:59:29.200 §MemFree:        15254764 kB
> 11:59:29.200 §MemAvailable:   19243184 kB
> 11:59:29.200 §Buffers:            6792 kB
> 11:59:29.201 §Cached:          4084844 kB
> 11:59:29.201 §SwapCached:            0 kB
> 11:59:29.201 §Active:          3609016 kB
> 11:59:29.201 §Inactive:        1175160 kB
> 11:59:29.201 §Active(anon):     695644 kB
> 11:59:29.202 §Inactive(anon):    19716 kB
> 11:59:29.202 §Active(file):    2913372 kB
> 11:59:29.202 §Inactive(file):  1155444 kB
> 11:59:29.202 §Unevictable:           0 kB
> 11:59:29.202 §Mlocked:               0 kB
> 11:59:29.203 §SwapTotal:      11665404 kB
> 11:59:29.204 §SwapFree:       11665404 kB
> 11:59:29.204 §Dirty:                32 kB
> 11:59:29.204 §Writeback:             0 kB
> 11:59:29.204 §AnonPages:        694764 kB
> 11:59:29.205 §Mapped:           140220 kB
> 11:59:29.205 §Shmem:             22800 kB
> 11:59:29.205 §Slab:             445016 kB
> 11:59:29.205 §SReclaimable:     289968 kB
> 11:59:29.205 §SUnreclaim:       155048 kB
> 11:59:29.206 §KernelStack:       16624 kB
> 11:59:29.206 §PageTables:        35892 kB
> 11:59:29.206 §NFS_Unstable:          0 kB
> 11:59:29.206 §Bounce:                0 kB
> 11:59:29.206 §WritebackTmp:          0 kB
> 11:59:29.207 §CommitLimit:    22167664 kB
> 11:59:29.207 §Committed_AS:    4342668 kB
> 11:59:29.207 §VmallocTotal:   34359738367 kB
> 11:59:29.207 §VmallocUsed:      463188 kB
> 11:59:29.207 §VmallocChunk:   34358835196 kB
> 11:59:29.208 §HardwareCorrupted:     0 kB
> 11:59:29.208 §AnonHugePages:    329728 kB
> 11:59:29.208 §CmaTotal:              0 kB
> 11:59:29.209 §CmaFree:               0 kB
> 11:59:29.209 §HugePages_Total:    1024
> 11:59:29.209 §HugePages_Free:     1019
> 11:59:29.209 §HugePages_Rsvd:        0
> 11:59:29.209 §HugePages_Surp:        0
> 11:59:29.209 §Hugepagesize:       2048 kB
> 11:59:29.209 §DirectMap4k:      381760 kB
> 11:59:29.209 §DirectMap2M:    13973504 kB
> 11:59:29.215 §DirectMap1G:    11534336 kB
>
> Regards
>
>
> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote:
>
>> Can you paste output of /proc/meminfo ?
>>
>>
>>
>> Regards,
>> NV
>>
>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> wrote:
>>
>>> Hi Team,
>>>
>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
>>> Controller but facing following issues:
>>>
>>> If someone can look into the following logs and help me figure out the
>>> issue?
>>>
>>>
>>>
>>> 1. DPDK 20.11 ( Using 1 GB hugepages)
>>>
>>>    gdb ./dpdk-testpmd
>>>
>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>>>
>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>>>
>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
>>> http://gnu.org/licenses/gpl.html
>>>
>>> 12:45:59.349 §This is free software: you are free to change and
>>> redistribute it.
>>>
>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.  Type
>>> "show copying"
>>>
>>> 12:45:59.349 §and "show warranty" for details.
>>>
>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>>>
>>> 12:45:59.351 §For bug reporting instructions, please see:
>>>
>>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
>>>
>>> 12:45:59.415 §Reading symbols from
>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols
>>> found)...done.
>>>
>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>>>
>>> 12:46:11.493 §Starting program:
>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i
>>>
>>> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>>>
>>> 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1".
>>>
>>> 12:46:11.768 §EAL: Detected 6 lcore(s)
>>>
>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>>>
>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>>>
>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>
>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>>>
>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>>>
>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>>>
>>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
>>>
>>> 12:46:11.854 §EAL: Probing VFIO support...
>>>
>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>>>
>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>>>
>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>>>
>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>>>
>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>>>
>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>> 0000:65:00.0 (socket 0)
>>>
>>> 12:46:11.915 §
>>>
>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>>>
>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>
>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
>>> zlib-1.2.7-19.el7_9.x86_64
>>>
>>> 12:46:14.542 §(gdb) bt
>>>
>>> 12:46:14.548 §#0  0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>
>>> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
>>>
>>> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
>>>
>>> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
>>>
>>> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>>>
>>> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
>>>
>>> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
>>>
>>> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
>>>
>>> 12:46:14.617 §#8  0x0000000000425db1 in main ()
>>>
>>> 12:46:17.052 §(gdb) quit
>>>
>>> 12:46:17.056 §A debugging session is active.
>>>
>>> 12:46:17.056 §
>>>
>>> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
>>>
>>>
>>>
>>>
>>>
>>> 2. *DPDK 21.05:*
>>>
>>>    ./dpdk-testpmd -l 0-5 -n4 -- -i
>>>
>>> 12:46:46.257 §EAL: Detected 6 lcore(s)
>>>
>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>>>
>>> 12:46:46.258 §EAL: Detected static linkage of DPDK
>>>
>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>
>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>>>
>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>>>
>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>>>
>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>> 0000:65:00.0 (socket 0)
>>>
>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP
>>> scratch-pad is not configured
>>>
>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
>>>
>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not
>>> initialized!
>>>
>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
>>> initialized
>>>
>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
>>> information
>>>
>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>>>
>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
>>> failed rc -3
>>>
>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>>>
>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created
>>>
>>> 12:46:46.423 §testpmd: No probed ethernet devices
>>>
>>> 12:46:46.461 §Interactive-mode selected
>>>
>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
>>> size=2176, socket=0
>>>
>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>>>
>>> 12:46:46.540 §Done
>>>
>>>
>>>
>>>
>>>
>>> System Information:
>>>
>>> *ethtool -i p2p1*
>>> driver: qede
>>> version: 8.33.0.20
>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
>>> expansion-rom-version:
>>> bus-info: 0000:65:00.0
>>> supports-statistics: yes
>>> supports-test: yes
>>> supports-eeprom-access: no
>>> supports-register-dump: yes
>>> supports-priv-flags: yes
>>>
>>>
>>>
>>> *ethtool -i p2p2 *driver: qede
>>> version: 8.33.0.20
>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
>>> expansion-rom-version:
>>> bus-info: 0000:65:00.1
>>> supports-statistics: yes
>>> supports-test: yes
>>> supports-eeprom-access: no
>>> supports-register-dump: yes
>>> supports-priv-flags: yes
>>>
>>>
>>>
>>>
>>>
>>> *lspci -nn | grep Ether*
>>>
>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>
>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>
>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>
>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>
>>>
>>>
>>> cd /lib/firmware/qed/
>>>
>>> ls
>>>
>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin
>>> qed_init_values-8.30.12.0.bin         qed_init_values_zipped-8.10.5.0.bin
>>> qed_init_values_zipped-8.33.11.0.bin  qed_init_values_zipped-8.7.3.0.bin
>>>
>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin
>>> qed_init_values-8.33.12.0.bin         qed_init_values_zipped-8.15.3.0.bin
>>> qed_init_values_zipped-8.37.2.0.bin
>>>
>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin
>>> qed_init_values-8.40.33.0.bin         qed_init_values_zipped-8.20.0.0.bin
>>> qed_init_values_zipped-8.37.7.0.bin
>>>
>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin
>>> qed_init_values_zipped-8.10.10.0.bin  qed_init_values_zipped-8.33.1.0.bin
>>> qed_init_values_zipped-8.4.2.0.bin
>>>
>>>
>>> Best Regards
>>>
>>> Puneet
>>>
>>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
  2021-05-26  4:35     ` Nishant Verma
@ 2021-05-26  4:41       ` Truring Team
  2021-05-26  9:57         ` Varghese, Vipin
  0 siblings, 1 reply; 7+ messages in thread
From: Truring Team @ 2021-05-26  4:41 UTC (permalink / raw)
  To: Nishant Verma; +Cc: dev, USERS

Yes , I have configured it via grub.

Grub:
"default_hugepagesz=1G hugepagesz=1G hugepages=2"
grub2-mkconfig -o /boot/grub2/grub.cfg

Manual:
mkdir /dev/hugepages1G
mount -t hugetlbfs -o pagesize=1G none /dev/hugepages1G
echo 2 >
/sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages

Regards
Puneet

On Wed, 26 May 2021 at 10:05, Nishant Verma <vnish11@gmail.com> wrote:

> meminfo states: Hugepagesize:    1048576 kB
> But  in your initial mail you state Hugepage size is 1G.
>
> have you configured HugePage via grub.... ?
>
>
> Thanks.
>
> Regards,
> NV
>
> On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com> wrote:
>
>> Hi Nishant,
>>
>> cat /proc/meminfo
>> 11:59:29.200 §MemTotal:       23101672 kB
>> 11:59:29.200 §MemFree:        15254764 kB
>> 11:59:29.200 §MemAvailable:   19243184 kB
>> 11:59:29.200 §Buffers:            6792 kB
>> 11:59:29.201 §Cached:          4084844 kB
>> 11:59:29.201 §SwapCached:            0 kB
>> 11:59:29.201 §Active:          3609016 kB
>> 11:59:29.201 §Inactive:        1175160 kB
>> 11:59:29.201 §Active(anon):     695644 kB
>> 11:59:29.202 §Inactive(anon):    19716 kB
>> 11:59:29.202 §Active(file):    2913372 kB
>> 11:59:29.202 §Inactive(file):  1155444 kB
>> 11:59:29.202 §Unevictable:           0 kB
>> 11:59:29.202 §Mlocked:               0 kB
>> 11:59:29.203 §SwapTotal:      11665404 kB
>> 11:59:29.204 §SwapFree:       11665404 kB
>> 11:59:29.204 §Dirty:                32 kB
>> 11:59:29.204 §Writeback:             0 kB
>> 11:59:29.204 §AnonPages:        694764 kB
>> 11:59:29.205 §Mapped:           140220 kB
>> 11:59:29.205 §Shmem:             22800 kB
>> 11:59:29.205 §Slab:             445016 kB
>> 11:59:29.205 §SReclaimable:     289968 kB
>> 11:59:29.205 §SUnreclaim:       155048 kB
>> 11:59:29.206 §KernelStack:       16624 kB
>> 11:59:29.206 §PageTables:        35892 kB
>> 11:59:29.206 §NFS_Unstable:          0 kB
>> 11:59:29.206 §Bounce:                0 kB
>> 11:59:29.206 §WritebackTmp:          0 kB
>> 11:59:29.207 §CommitLimit:    22167664 kB
>> 11:59:29.207 §Committed_AS:    4342668 kB
>> 11:59:29.207 §VmallocTotal:   34359738367 kB
>> 11:59:29.207 §VmallocUsed:      463188 kB
>> 11:59:29.207 §VmallocChunk:   34358835196 kB
>> 11:59:29.208 §HardwareCorrupted:     0 kB
>> 11:59:29.208 §AnonHugePages:    329728 kB
>> 11:59:29.208 §CmaTotal:              0 kB
>> 11:59:29.209 §CmaFree:               0 kB
>> 11:59:29.209 §HugePages_Total:    1024
>> 11:59:29.209 §HugePages_Free:     1019
>> 11:59:29.209 §HugePages_Rsvd:        0
>> 11:59:29.209 §HugePages_Surp:        0
>> 11:59:29.209 §Hugepagesize:       2048 kB
>> 11:59:29.209 §DirectMap4k:      381760 kB
>> 11:59:29.209 §DirectMap2M:    13973504 kB
>> 11:59:29.215 §DirectMap1G:    11534336 kB
>>
>> Regards
>>
>>
>> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote:
>>
>>> Can you paste output of /proc/meminfo ?
>>>
>>>
>>>
>>> Regards,
>>> NV
>>>
>>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com>
>>> wrote:
>>>
>>>> Hi Team,
>>>>
>>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
>>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
>>>> Controller but facing following issues:
>>>>
>>>> If someone can look into the following logs and help me figure out the
>>>> issue?
>>>>
>>>>
>>>>
>>>> 1. DPDK 20.11 ( Using 1 GB hugepages)
>>>>
>>>>    gdb ./dpdk-testpmd
>>>>
>>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>>>>
>>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>>>>
>>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
>>>> http://gnu.org/licenses/gpl.html
>>>>
>>>> 12:45:59.349 §This is free software: you are free to change and
>>>> redistribute it.
>>>>
>>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.
>>>> Type
>>>> "show copying"
>>>>
>>>> 12:45:59.349 §and "show warranty" for details.
>>>>
>>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>>>>
>>>> 12:45:59.351 §For bug reporting instructions, please see:
>>>>
>>>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
>>>>
>>>> 12:45:59.415 §Reading symbols from
>>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging
>>>> symbols
>>>> found)...done.
>>>>
>>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>>>>
>>>> 12:46:11.493 §Starting program:
>>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i
>>>>
>>>> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>>>>
>>>> 12:46:11.719 §Using host libthread_db library
>>>> "/lib64/libthread_db.so.1".
>>>>
>>>> 12:46:11.768 §EAL: Detected 6 lcore(s)
>>>>
>>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>>>>
>>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>>>>
>>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>>
>>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>>>>
>>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>>>>
>>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>>>>
>>>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
>>>>
>>>> 12:46:11.854 §EAL: Probing VFIO support...
>>>>
>>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>>>>
>>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>>>>
>>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>>>>
>>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>>>>
>>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>>>>
>>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>>> 0000:65:00.0 (socket 0)
>>>>
>>>> 12:46:11.915 §
>>>>
>>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>>>>
>>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>>
>>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
>>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
>>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
>>>> zlib-1.2.7-19.el7_9.x86_64
>>>>
>>>> 12:46:14.542 §(gdb) bt
>>>>
>>>> 12:46:14.548 §#0  0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>>
>>>> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
>>>>
>>>> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
>>>>
>>>> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
>>>>
>>>> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>>>>
>>>> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
>>>>
>>>> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
>>>>
>>>> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
>>>>
>>>> 12:46:14.617 §#8  0x0000000000425db1 in main ()
>>>>
>>>> 12:46:17.052 §(gdb) quit
>>>>
>>>> 12:46:17.056 §A debugging session is active.
>>>>
>>>> 12:46:17.056 §
>>>>
>>>> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> 2. *DPDK 21.05:*
>>>>
>>>>    ./dpdk-testpmd -l 0-5 -n4 -- -i
>>>>
>>>> 12:46:46.257 §EAL: Detected 6 lcore(s)
>>>>
>>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>>>>
>>>> 12:46:46.258 §EAL: Detected static linkage of DPDK
>>>>
>>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>>
>>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>>>>
>>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>>>>
>>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>>>>
>>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>>> 0000:65:00.0 (socket 0)
>>>>
>>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the
>>>> MCP
>>>> scratch-pad is not configured
>>>>
>>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
>>>>
>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not
>>>> initialized!
>>>>
>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
>>>> initialized
>>>>
>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
>>>> information
>>>>
>>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>>>>
>>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
>>>> failed rc -3
>>>>
>>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>>>>
>>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created
>>>>
>>>> 12:46:46.423 §testpmd: No probed ethernet devices
>>>>
>>>> 12:46:46.461 §Interactive-mode selected
>>>>
>>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
>>>> size=2176, socket=0
>>>>
>>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>>>>
>>>> 12:46:46.540 §Done
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> System Information:
>>>>
>>>> *ethtool -i p2p1*
>>>> driver: qede
>>>> version: 8.33.0.20
>>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
>>>> expansion-rom-version:
>>>> bus-info: 0000:65:00.0
>>>> supports-statistics: yes
>>>> supports-test: yes
>>>> supports-eeprom-access: no
>>>> supports-register-dump: yes
>>>> supports-priv-flags: yes
>>>>
>>>>
>>>>
>>>> *ethtool -i p2p2 *driver: qede
>>>> version: 8.33.0.20
>>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
>>>> expansion-rom-version:
>>>> bus-info: 0000:65:00.1
>>>> supports-statistics: yes
>>>> supports-test: yes
>>>> supports-eeprom-access: no
>>>> supports-register-dump: yes
>>>> supports-priv-flags: yes
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *lspci -nn | grep Ether*
>>>>
>>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
>>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>>
>>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
>>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>>
>>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
>>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>>
>>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
>>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>>
>>>>
>>>>
>>>> cd /lib/firmware/qed/
>>>>
>>>> ls
>>>>
>>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin
>>>> qed_init_values-8.30.12.0.bin
>>>>  qed_init_values_zipped-8.10.5.0.bin
>>>> qed_init_values_zipped-8.33.11.0.bin  qed_init_values_zipped-8.7.3.0.bin
>>>>
>>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin
>>>> qed_init_values-8.33.12.0.bin
>>>>  qed_init_values_zipped-8.15.3.0.bin
>>>> qed_init_values_zipped-8.37.2.0.bin
>>>>
>>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin
>>>> qed_init_values-8.40.33.0.bin
>>>>  qed_init_values_zipped-8.20.0.0.bin
>>>> qed_init_values_zipped-8.37.7.0.bin
>>>>
>>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin
>>>> qed_init_values_zipped-8.10.10.0.bin
>>>> qed_init_values_zipped-8.33.1.0.bin
>>>> qed_init_values_zipped-8.4.2.0.bin
>>>>
>>>>
>>>> Best Regards
>>>>
>>>> Puneet
>>>>
>>>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
  2021-05-26  4:41       ` Truring Team
@ 2021-05-26  9:57         ` Varghese, Vipin
  2021-06-01 13:00           ` [dpdk-dev] [EXT] " Igor Russkikh
  0 siblings, 1 reply; 7+ messages in thread
From: Varghese, Vipin @ 2021-05-26  9:57 UTC (permalink / raw)
  To: Truring Team, Nishant Verma; +Cc: dev, USERS

Based on the logs shared from `Turing Team`, the observation is as follows

1. 1GB huge pages are used in the application

```logs
12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
```

2. Issue comes right at `device porbe to initialize`

```logs
12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: 0000:65:00.0 (socket 0)
12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP scratch-pad is not configured
12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized!
12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not initialized
12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW information
12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-> 0)]qede probe failed rc -3
```

Hence in my opinion this is related to NIC in use and how it is getting initialized. So please try to debug driver 

> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Truring Team
> Sent: Wednesday, May 26, 2021 10:12 AM
> To: Nishant Verma <vnish11@gmail.com>
> Cc: dev@dpdk.org; USERS <users@dpdk.org>
> Subject: Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic
> Corp. FastLinQ QL41000
> 
> Yes , I have configured it via grub.
> 
> Grub:
> "default_hugepagesz=1G hugepagesz=1G hugepages=2"
> grub2-mkconfig -o /boot/grub2/grub.cfg
> 
> Manual:
> mkdir /dev/hugepages1G
> mount -t hugetlbfs -o pagesize=1G none /dev/hugepages1G echo 2 >
> /sys/devices/system/node/node1/hugepages/hugepages-
> 1048576kB/nr_hugepages
> 
> Regards
> Puneet
> 
> On Wed, 26 May 2021 at 10:05, Nishant Verma <vnish11@gmail.com> wrote:
> 
> > meminfo states: Hugepagesize:    1048576 kB
> > But  in your initial mail you state Hugepage size is 1G.
> >
> > have you configured HugePage via grub.... ?
> >
> >
> > Thanks.
> >
> > Regards,
> > NV
> >
> > On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com>
> wrote:
> >
> >> Hi Nishant,
> >>
> >> cat /proc/meminfo
> >> 11:59:29.200 §MemTotal:       23101672 kB
> >> 11:59:29.200 §MemFree:        15254764 kB
> >> 11:59:29.200 §MemAvailable:   19243184 kB
> >> 11:59:29.200 §Buffers:            6792 kB
> >> 11:59:29.201 §Cached:          4084844 kB
> >> 11:59:29.201 §SwapCached:            0 kB
> >> 11:59:29.201 §Active:          3609016 kB
> >> 11:59:29.201 §Inactive:        1175160 kB
> >> 11:59:29.201 §Active(anon):     695644 kB
> >> 11:59:29.202 §Inactive(anon):    19716 kB
> >> 11:59:29.202 §Active(file):    2913372 kB
> >> 11:59:29.202 §Inactive(file):  1155444 kB
> >> 11:59:29.202 §Unevictable:           0 kB
> >> 11:59:29.202 §Mlocked:               0 kB
> >> 11:59:29.203 §SwapTotal:      11665404 kB
> >> 11:59:29.204 §SwapFree:       11665404 kB
> >> 11:59:29.204 §Dirty:                32 kB
> >> 11:59:29.204 §Writeback:             0 kB
> >> 11:59:29.204 §AnonPages:        694764 kB
> >> 11:59:29.205 §Mapped:           140220 kB
> >> 11:59:29.205 §Shmem:             22800 kB
> >> 11:59:29.205 §Slab:             445016 kB
> >> 11:59:29.205 §SReclaimable:     289968 kB
> >> 11:59:29.205 §SUnreclaim:       155048 kB
> >> 11:59:29.206 §KernelStack:       16624 kB
> >> 11:59:29.206 §PageTables:        35892 kB
> >> 11:59:29.206 §NFS_Unstable:          0 kB
> >> 11:59:29.206 §Bounce:                0 kB
> >> 11:59:29.206 §WritebackTmp:          0 kB
> >> 11:59:29.207 §CommitLimit:    22167664 kB
> >> 11:59:29.207 §Committed_AS:    4342668 kB
> >> 11:59:29.207 §VmallocTotal:   34359738367 kB
> >> 11:59:29.207 §VmallocUsed:      463188 kB
> >> 11:59:29.207 §VmallocChunk:   34358835196 kB
> >> 11:59:29.208 §HardwareCorrupted:     0 kB
> >> 11:59:29.208 §AnonHugePages:    329728 kB
> >> 11:59:29.208 §CmaTotal:              0 kB
> >> 11:59:29.209 §CmaFree:               0 kB
> >> 11:59:29.209 §HugePages_Total:    1024
> >> 11:59:29.209 §HugePages_Free:     1019
> >> 11:59:29.209 §HugePages_Rsvd:        0
> >> 11:59:29.209 §HugePages_Surp:        0
> >> 11:59:29.209 §Hugepagesize:       2048 kB
> >> 11:59:29.209 §DirectMap4k:      381760 kB
> >> 11:59:29.209 §DirectMap2M:    13973504 kB
> >> 11:59:29.215 §DirectMap1G:    11534336 kB
> >>
> >> Regards
> >>
> >>
> >> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com>
> wrote:
> >>
> >>> Can you paste output of /proc/meminfo ?
> >>>
> >>>
> >>>
> >>> Regards,
> >>> NV
> >>>
> >>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com>
> >>> wrote:
> >>>
> >>>> Hi Team,
> >>>>
> >>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and
> >>>> DPDK
> >>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
> >>>> Controller but facing following issues:
> >>>>
> >>>> If someone can look into the following logs and help me figure out
> >>>> the issue?
> >>>>
> >>>>
> >>>>
> >>>> 1. DPDK 20.11 ( Using 1 GB hugepages)
> >>>>
> >>>>    gdb ./dpdk-testpmd
> >>>>
> >>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
> >>>>
> >>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
> >>>>
> >>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
> >>>> http://gnu.org/licenses/gpl.html
> >>>>
> >>>> 12:45:59.349 §This is free software: you are free to change and
> >>>> redistribute it.
> >>>>
> >>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.
> >>>> Type
> >>>> "show copying"
> >>>>
> >>>> 12:45:59.349 §and "show warranty" for details.
> >>>>
> >>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
> >>>>
> >>>> 12:45:59.351 §For bug reporting instructions, please see:
> >>>>
> >>>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
> >>>>
> >>>> 12:45:59.415 §Reading symbols from
> >>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no
> debugging
> >>>> symbols found)...done.
> >>>>
> >>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
> >>>>
> >>>> 12:46:11.493 §Starting program:
> >>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 --
> >>>> -i
> >>>>
> >>>> 12:46:11.717 §[Thread debugging using libthread_db enabled]
> >>>>
> >>>> 12:46:11.719 §Using host libthread_db library
> >>>> "/lib64/libthread_db.so.1".
> >>>>
> >>>> 12:46:11.768 §EAL: Detected 6 lcore(s)
> >>>>
> >>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes
> >>>>
> >>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
> >>>>
> >>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> >>>>
> >>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
> >>>>
> >>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
> >>>>
> >>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
> >>>>
> >>>> 12:46:11.792 §EAL: No available hugepages reported in
> >>>> hugepages-2048kB
> >>>>
> >>>> 12:46:11.854 §EAL: Probing VFIO support...
> >>>>
> >>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
> >>>>
> >>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
> >>>>
> >>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
> >>>>
> >>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
> >>>>
> >>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
> >>>>
> >>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
> >>>> 0000:65:00.0 (socket 0)
> >>>>
> >>>> 12:46:11.915 §
> >>>>
> >>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
> >>>>
> >>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
> >>>>
> >>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
> >>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
> >>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
> >>>> zlib-1.2.7-19.el7_9.x86_64
> >>>>
> >>>> 12:46:14.542 §(gdb) bt
> >>>>
> >>>> 12:46:14.548 §#0  0x0000000000ec5b20 in
> ecore_fw_overlay_mem_alloc
> >>>> ()
> >>>>
> >>>> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
> >>>>
> >>>> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
> >>>>
> >>>> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
> >>>>
> >>>> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
> >>>>
> >>>> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
> >>>>
> >>>> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
> >>>>
> >>>> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
> >>>>
> >>>> 12:46:14.617 §#8  0x0000000000425db1 in main ()
> >>>>
> >>>> 12:46:17.052 §(gdb) quit
> >>>>
> >>>> 12:46:17.056 §A debugging session is active.
> >>>>
> >>>> 12:46:17.056 §
> >>>>
> >>>> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> 2. *DPDK 21.05:*
> >>>>
> >>>>    ./dpdk-testpmd -l 0-5 -n4 -- -i
> >>>>
> >>>> 12:46:46.257 §EAL: Detected 6 lcore(s)
> >>>>
> >>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes
> >>>>
> >>>> 12:46:46.258 §EAL: Detected static linkage of DPDK
> >>>>
> >>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> >>>>
> >>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
> >>>>
> >>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
> >>>>
> >>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
> >>>>
> >>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
> >>>> 0000:65:00.0 (socket 0)
> >>>>
> >>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of
> >>>> the MCP scratch-pad is not configured
> >>>>
> >>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not
> >>>> initialized
> >>>>
> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not
> >>>> initialized!
> >>>>
> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared
> memory not
> >>>> initialized
> >>>>
> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get
> >>>> HW information
> >>>>
> >>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
> >>>>
> >>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-
> 0)]qede
> >>>> probe failed rc -3
> >>>>
> >>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
> >>>>
> >>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not
> >>>> created
> >>>>
> >>>> 12:46:46.423 §testpmd: No probed ethernet devices
> >>>>
> >>>> 12:46:46.461 §Interactive-mode selected
> >>>>
> >>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>:
> >>>> n=187456, size=2176, socket=0
> >>>>
> >>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
> >>>>
> >>>> 12:46:46.540 §Done
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> System Information:
> >>>>
> >>>> *ethtool -i p2p1*
> >>>> driver: qede
> >>>> version: 8.33.0.20
> >>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
> >>>> expansion-rom-version:
> >>>> bus-info: 0000:65:00.0
> >>>> supports-statistics: yes
> >>>> supports-test: yes
> >>>> supports-eeprom-access: no
> >>>> supports-register-dump: yes
> >>>> supports-priv-flags: yes
> >>>>
> >>>>
> >>>>
> >>>> *ethtool -i p2p2 *driver: qede
> >>>> version: 8.33.0.20
> >>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
> >>>> expansion-rom-version:
> >>>> bus-info: 0000:65:00.1
> >>>> supports-statistics: yes
> >>>> supports-test: yes
> >>>> supports-eeprom-access: no
> >>>> supports-register-dump: yes
> >>>> supports-priv-flags: yes
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> *lspci -nn | grep Ether*
> >>>>
> >>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
> >>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
> >>>>
> >>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
> >>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
> >>>>
> >>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp.
> >>>> FastLinQ
> >>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
> >>>>
> >>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp.
> >>>> FastLinQ
> >>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
> >>>>
> >>>>
> >>>>
> >>>> cd /lib/firmware/qed/
> >>>>
> >>>> ls
> >>>>
> >>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin
> >>>> qed_init_values-8.30.12.0.bin  qed_init_values_zipped-8.10.5.0.bin
> >>>> qed_init_values_zipped-8.33.11.0.bin
> >>>> qed_init_values_zipped-8.7.3.0.bin
> >>>>
> >>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin
> >>>> qed_init_values-8.33.12.0.bin  qed_init_values_zipped-8.15.3.0.bin
> >>>> qed_init_values_zipped-8.37.2.0.bin
> >>>>
> >>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin
> >>>> qed_init_values-8.40.33.0.bin  qed_init_values_zipped-8.20.0.0.bin
> >>>> qed_init_values_zipped-8.37.7.0.bin
> >>>>
> >>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin
> >>>> qed_init_values_zipped-8.10.10.0.bin
> >>>> qed_init_values_zipped-8.33.1.0.bin
> >>>> qed_init_values_zipped-8.4.2.0.bin
> >>>>
> >>>>
> >>>> Best Regards
> >>>>
> >>>> Puneet
> >>>>
> >>>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [dpdk-dev] [EXT] Re: [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
  2021-05-26  9:57         ` Varghese, Vipin
@ 2021-06-01 13:00           ` Igor Russkikh
  0 siblings, 0 replies; 7+ messages in thread
From: Igor Russkikh @ 2021-06-01 13:00 UTC (permalink / raw)
  To: Varghese, Vipin, Truring Team, Nishant Verma
  Cc: dev, USERS, Devendra Singh Rawat, Rasesh Mody

Adding my team members for that.

Strangely, even if by any reason we would get OOM condition - driver should reject load gracefully.

Is there any possibility FW image could be corrupted/of bad size?

Regards, 
  Igor

On 5/26/2021 11:57 AM, Varghese, Vipin wrote:
> External Email
> 
> ----------------------------------------------------------------------
> Based on the logs shared from `Turing Team`, the observation is as follows
> 
> 1. 1GB huge pages are used in the application
> 
> ```logs
> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
> ```
> 
> 2. Issue comes right at `device porbe to initialize`
> 
> ```logs
> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: 
> 0000:65:00.0 (socket 0)
> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP 
> scratch-pad is not configured
> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized!
> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not 
> initialized
> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW 
> information
> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-> 0)]qede probe 
> failed rc -3
> ```
> 
> Hence in my opinion this is related to NIC in use and how it is getting 
> initialized. So please try to debug driver
> 
>> -----Original Message-----
>> From: dev <dev-bounces@dpdk.org> On Behalf Of Truring Team
>> Sent: Wednesday, May 26, 2021 10:12 AM
>> To: Nishant Verma <vnish11@gmail.com>
>> Cc: dev@dpdk.org; USERS <users@dpdk.org>
>> Subject: Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic
>> Corp. FastLinQ QL41000
>>
>> Yes , I have configured it via grub.
>>
>> Grub:
>> "default_hugepagesz=1G hugepagesz=1G hugepages=2"
>> grub2-mkconfig -o /boot/grub2/grub.cfg
>>
>> Manual:
>> mkdir /dev/hugepages1G
>> mount -t hugetlbfs -o pagesize=1G none /dev/hugepages1G echo 2 >
>> /sys/devices/system/node/node1/hugepages/hugepages-
>> 1048576kB/nr_hugepages
>>
>> Regards
>> Puneet
>>
>> On Wed, 26 May 2021 at 10:05, Nishant Verma <vnish11@gmail.com> wrote:
>>
>>> meminfo states: Hugepagesize:    1048576 kB
>>> But  in your initial mail you state Hugepage size is 1G.
>>>
>>> have you configured HugePage via grub.... ?
>>>
>>>
>>> Thanks.
>>>
>>> Regards,
>>> NV
>>>
>>> On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com>
>> wrote:
>>>
>>>> Hi Nishant,
>>>>
>>>> cat /proc/meminfo
>>>> 11:59:29.200 §MemTotal:       23101672 kB
>>>> 11:59:29.200 §MemFree:        15254764 kB
>>>> 11:59:29.200 §MemAvailable:   19243184 kB
>>>> 11:59:29.200 §Buffers:            6792 kB
>>>> 11:59:29.201 §Cached:          4084844 kB
>>>> 11:59:29.201 §SwapCached:            0 kB
>>>> 11:59:29.201 §Active:          3609016 kB
>>>> 11:59:29.201 §Inactive:        1175160 kB
>>>> 11:59:29.201 §Active(anon):     695644 kB
>>>> 11:59:29.202 §Inactive(anon):    19716 kB
>>>> 11:59:29.202 §Active(file):    2913372 kB
>>>> 11:59:29.202 §Inactive(file):  1155444 kB
>>>> 11:59:29.202 §Unevictable:           0 kB
>>>> 11:59:29.202 §Mlocked:               0 kB
>>>> 11:59:29.203 §SwapTotal:      11665404 kB
>>>> 11:59:29.204 §SwapFree:       11665404 kB
>>>> 11:59:29.204 §Dirty:                32 kB
>>>> 11:59:29.204 §Writeback:             0 kB
>>>> 11:59:29.204 §AnonPages:        694764 kB
>>>> 11:59:29.205 §Mapped:           140220 kB
>>>> 11:59:29.205 §Shmem:             22800 kB
>>>> 11:59:29.205 §Slab:             445016 kB
>>>> 11:59:29.205 §SReclaimable:     289968 kB
>>>> 11:59:29.205 §SUnreclaim:       155048 kB
>>>> 11:59:29.206 §KernelStack:       16624 kB
>>>> 11:59:29.206 §PageTables:        35892 kB
>>>> 11:59:29.206 §NFS_Unstable:          0 kB
>>>> 11:59:29.206 §Bounce:                0 kB
>>>> 11:59:29.206 §WritebackTmp:          0 kB
>>>> 11:59:29.207 §CommitLimit:    22167664 kB
>>>> 11:59:29.207 §Committed_AS:    4342668 kB
>>>> 11:59:29.207 §VmallocTotal:   34359738367 kB
>>>> 11:59:29.207 §VmallocUsed:      463188 kB
>>>> 11:59:29.207 §VmallocChunk:   34358835196 kB
>>>> 11:59:29.208 §HardwareCorrupted:     0 kB
>>>> 11:59:29.208 §AnonHugePages:    329728 kB
>>>> 11:59:29.208 §CmaTotal:              0 kB
>>>> 11:59:29.209 §CmaFree:               0 kB
>>>> 11:59:29.209 §HugePages_Total:    1024
>>>> 11:59:29.209 §HugePages_Free:     1019
>>>> 11:59:29.209 §HugePages_Rsvd:        0
>>>> 11:59:29.209 §HugePages_Surp:        0
>>>> 11:59:29.209 §Hugepagesize:       2048 kB
>>>> 11:59:29.209 §DirectMap4k:      381760 kB
>>>> 11:59:29.209 §DirectMap2M:    13973504 kB
>>>> 11:59:29.215 §DirectMap1G:    11534336 kB
>>>>
>>>> Regards
>>>>
>>>>
>>>> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com>
>> wrote:
>>>>
>>>>> Can you paste output of /proc/meminfo ?
>>>>>
>>>>>
>>>>>
>>>>> Regards,
>>>>> NV
>>>>>
>>>>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Team,
>>>>>>
>>>>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and
>>>>>> DPDK
>>>>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
>>>>>> Controller but facing following issues:
>>>>>>
>>>>>> If someone can look into the following logs and help me figure out
>>>>>> the issue?
>>>>>>
>>>>>>
>>>>>>
>>>>>> 1. DPDK 20.11 ( Using 1 GB hugepages)
>>>>>>
>>>>>>    gdb ./dpdk-testpmd
>>>>>>
>>>>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>>>>>>
>>>>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>>>>>>
>>>>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
>>>>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__gnu.org_licenses_gpl.html&d=DwIGaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=3kUjVPjrPMvlbd3rzgP63W0eewvCq4D-kzQRqaXHOqU&m=XPT-odmQXtSC6Yu2ao1h1I9z-Lzp3iTY8Er77XRkORc&s=_ge-P-H6ALF17WiCqG3NOsjp15Nbk8ptb-RpqVIpLrE&e=
>>>>>>
>>>>>> 12:45:59.349 §This is free software: you are free to change and
>>>>>> redistribute it.
>>>>>>
>>>>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.
>>>>>> Type
>>>>>> "show copying"
>>>>>>
>>>>>> 12:45:59.349 §and "show warranty" for details.
>>>>>>
>>>>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>>>>>>
>>>>>> 12:45:59.351 §For bug reporting instructions, please see:
>>>>>>
>>>>>> 12:45:59.351 
>>>>>> §https://urldefense.proofpoint.com/v2/url?u=http-3A__www.gnu.org_software_gdb_bugs_&d=DwIGaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=3kUjVPjrPMvlbd3rzgP63W0eewvCq4D-kzQRqaXHOqU&m=XPT-odmQXtSC6Yu2ao1h1I9z-Lzp3iTY8Er77XRkORc&s=eGKKc0q8qdyW4CSbWUdq2X6ShOHrSYguXKRC6qpG-RQ&e= 
>>>>>> ...
>>>>>>
>>>>>> 12:45:59.415 §Reading symbols from
>>>>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no
>> debugging
>>>>>> symbols found)...done.
>>>>>>
>>>>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>>>>>>
>>>>>> 12:46:11.493 §Starting program:
>>>>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 --
>>>>>> -i
>>>>>>
>>>>>> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>>>>>>
>>>>>> 12:46:11.719 §Using host libthread_db library
>>>>>> "/lib64/libthread_db.so.1".
>>>>>>
>>>>>> 12:46:11.768 §EAL: Detected 6 lcore(s)
>>>>>>
>>>>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>>>>>>
>>>>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>>>>>>
>>>>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>>>>
>>>>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>>>>>>
>>>>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>>>>>>
>>>>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>>>>>>
>>>>>> 12:46:11.792 §EAL: No available hugepages reported in
>>>>>> hugepages-2048kB
>>>>>>
>>>>>> 12:46:11.854 §EAL: Probing VFIO support...
>>>>>>
>>>>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>>>>>>
>>>>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>>>>>>
>>>>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>>>>>>
>>>>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>>>>>>
>>>>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>>>>>>
>>>>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>>>>> 0000:65:00.0 (socket 0)
>>>>>>
>>>>>> 12:46:11.915 §
>>>>>>
>>>>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>>>>>>
>>>>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>>>>>
>>>>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
>>>>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
>>>>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
>>>>>> zlib-1.2.7-19.el7_9.x86_64
>>>>>>
>>>>>> 12:46:14.542 §(gdb) bt
>>>>>>
>>>>>> 12:46:14.548 §#0  0x0000000000ec5b20 in
>> ecore_fw_overlay_mem_alloc
>>>>>> ()
>>>>>>
>>>>>> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
>>>>>>
>>>>>> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
>>>>>>
>>>>>> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
>>>>>>
>>>>>> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>>>>>>
>>>>>> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
>>>>>>
>>>>>> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
>>>>>>
>>>>>> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
>>>>>>
>>>>>> 12:46:14.617 §#8  0x0000000000425db1 in main ()
>>>>>>
>>>>>> 12:46:17.052 §(gdb) quit
>>>>>>
>>>>>> 12:46:17.056 §A debugging session is active.
>>>>>>
>>>>>> 12:46:17.056 §
>>>>>>
>>>>>> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2. *DPDK 21.05:*
>>>>>>
>>>>>>    ./dpdk-testpmd -l 0-5 -n4 -- -i
>>>>>>
>>>>>> 12:46:46.257 §EAL: Detected 6 lcore(s)
>>>>>>
>>>>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>>>>>>
>>>>>> 12:46:46.258 §EAL: Detected static linkage of DPDK
>>>>>>
>>>>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>>>>>
>>>>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>>>>>>
>>>>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>>>>>>
>>>>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>>>>>>
>>>>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>>>>>> 0000:65:00.0 (socket 0)
>>>>>>
>>>>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of
>>>>>> the MCP scratch-pad is not configured
>>>>>>
>>>>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not
>>>>>> initialized
>>>>>>
>>>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not
>>>>>> initialized!
>>>>>>
>>>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared
>> memory not
>>>>>> initialized
>>>>>>
>>>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get
>>>>>> HW information
>>>>>>
>>>>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>>>>>>
>>>>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-
>> 0)]qede
>>>>>> probe failed rc -3
>>>>>>
>>>>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>>>>>>
>>>>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not
>>>>>> created
>>>>>>
>>>>>> 12:46:46.423 §testpmd: No probed ethernet devices
>>>>>>
>>>>>> 12:46:46.461 §Interactive-mode selected
>>>>>>
>>>>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>:
>>>>>> n=187456, size=2176, socket=0
>>>>>>
>>>>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>>>>>>
>>>>>> 12:46:46.540 §Done
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> System Information:
>>>>>>
>>>>>> *ethtool -i p2p1*
>>>>>> driver: qede
>>>>>> version: 8.33.0.20
>>>>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
>>>>>> expansion-rom-version:
>>>>>> bus-info: 0000:65:00.0
>>>>>> supports-statistics: yes
>>>>>> supports-test: yes
>>>>>> supports-eeprom-access: no
>>>>>> supports-register-dump: yes
>>>>>> supports-priv-flags: yes
>>>>>>
>>>>>>
>>>>>>
>>>>>> *ethtool -i p2p2 *driver: qede
>>>>>> version: 8.33.0.20
>>>>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
>>>>>> expansion-rom-version:
>>>>>> bus-info: 0000:65:00.1
>>>>>> supports-statistics: yes
>>>>>> supports-test: yes
>>>>>> supports-eeprom-access: no
>>>>>> supports-register-dump: yes
>>>>>> supports-priv-flags: yes
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> *lspci -nn | grep Ether*
>>>>>>
>>>>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
>>>>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>>>>
>>>>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
>>>>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>>>>>
>>>>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp.
>>>>>> FastLinQ
>>>>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>>>>
>>>>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp.
>>>>>> FastLinQ
>>>>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>>>>>
>>>>>>
>>>>>>
>>>>>> cd /lib/firmware/qed/
>>>>>>
>>>>>> ls
>>>>>>
>>>>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin
>>>>>> qed_init_values-8.30.12.0.bin  qed_init_values_zipped-8.10.5.0.bin
>>>>>> qed_init_values_zipped-8.33.11.0.bin
>>>>>> qed_init_values_zipped-8.7.3.0.bin
>>>>>>
>>>>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin
>>>>>> qed_init_values-8.33.12.0.bin  qed_init_values_zipped-8.15.3.0.bin
>>>>>> qed_init_values_zipped-8.37.2.0.bin
>>>>>>
>>>>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin
>>>>>> qed_init_values-8.40.33.0.bin  qed_init_values_zipped-8.20.0.0.bin
>>>>>> qed_init_values_zipped-8.37.7.0.bin
>>>>>>
>>>>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin
>>>>>> qed_init_values_zipped-8.10.10.0.bin
>>>>>> qed_init_values_zipped-8.33.1.0.bin
>>>>>> qed_init_values_zipped-8.4.2.0.bin
>>>>>>
>>>>>>
>>>>>> Best Regards
>>>>>>
>>>>>> Puneet
>>>>>>
>>>>>

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2021-06-01 13:01 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-26  1:51 [dpdk-dev] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 Truring Team
2021-05-26  4:13 ` [dpdk-dev] [dpdk-users] " Nishant Verma
2021-05-26  4:20   ` Truring Team
2021-05-26  4:35     ` Nishant Verma
2021-05-26  4:41       ` Truring Team
2021-05-26  9:57         ` Varghese, Vipin
2021-06-01 13:00           ` [dpdk-dev] [EXT] " Igor Russkikh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).