From: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
To: dev@dpdk.org, Yongseok Koh <yskoh@mellanox.com>
Cc: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: [dpdk-dev] [PATCH v4 12/21] net/mlx5: add mark/flag flow action
Date: Thu, 12 Jul 2018 11:30:58 +0200 [thread overview]
Message-ID: <44069f47c18613ad644867a4c230666d71c79a6f.1531387413.git.nelio.laranjeiro@6wind.com> (raw)
In-Reply-To: <cover.1531387413.git.nelio.laranjeiro@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
---
drivers/net/mlx5/mlx5_flow.c | 252 +++++++++++++++++++++++++++++++++++
drivers/net/mlx5/mlx5_rxtx.h | 1 +
2 files changed, 253 insertions(+)
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index f646eee01..1280db486 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -52,6 +52,10 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
#define MLX5_FLOW_FATE_DROP (1u << 0)
#define MLX5_FLOW_FATE_QUEUE (1u << 1)
+/* Modify a packet. */
+#define MLX5_FLOW_MOD_FLAG (1u << 0)
+#define MLX5_FLOW_MOD_MARK (1u << 1)
+
/* possible L3 layers protocols filtering. */
#define MLX5_IP_PROTOCOL_TCP 6
#define MLX5_IP_PROTOCOL_UDP 17
@@ -75,6 +79,8 @@ struct rte_flow {
uint32_t l3_protocol_en:1; /**< Protocol filtering requested. */
uint32_t layers;
/**< Bit-fields of present layers see MLX5_FLOW_LAYER_*. */
+ uint32_t modifier;
+ /**< Bit-fields of present modifier see MLX5_FLOW_MOD_*. */
uint32_t fate;
/**< Bit-fields of present fate see MLX5_FLOW_FATE_*. */
uint8_t l3_protocol; /**< valid when l3_protocol_en is set. */
@@ -984,6 +990,12 @@ mlx5_flow_action_drop(const struct rte_flow_action *action,
action,
"multiple fate actions are not"
" supported");
+ if (flow->modifier & (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "drop is not compatible with"
+ " flag/mark action");
if (size < flow_size)
mlx5_flow_spec_verbs_add(flow, &drop, size);
flow->fate |= MLX5_FLOW_FATE_DROP;
@@ -1036,6 +1048,161 @@ mlx5_flow_action_queue(struct rte_eth_dev *dev,
return 0;
}
+/**
+ * Convert the @p action into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] action
+ * Action configuration.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p action has fully been
+ * converted, otherwise another call with this returned memory size should
+ * be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_action_flag(const struct rte_flow_action *action,
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
+ struct ibv_flow_spec_action_tag tag = {
+ .type = IBV_FLOW_SPEC_ACTION_TAG,
+ .size = size,
+ .tag_id = mlx5_flow_mark_set(MLX5_FLOW_MARK_DEFAULT),
+ };
+
+ if (flow->modifier & MLX5_FLOW_MOD_FLAG)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "flag action already present");
+ if (flow->fate & MLX5_FLOW_FATE_DROP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "flag is not compatible with drop"
+ " action");
+ if (flow->modifier & MLX5_FLOW_MOD_MARK)
+ return 0;
+ flow->modifier |= MLX5_FLOW_MOD_FLAG;
+ if (size <= flow_size)
+ mlx5_flow_spec_verbs_add(flow, &tag, size);
+ return size;
+}
+
+/**
+ * Update verbs specification to modify the flag to mark.
+ *
+ * @param[in, out] flow
+ * Pointer to the rte_flow structure.
+ * @param[in] mark_id
+ * Mark identifier to replace the flag.
+ */
+static void
+mlx5_flow_verbs_mark_update(struct rte_flow *flow, uint32_t mark_id)
+{
+ struct ibv_spec_header *hdr;
+ int i;
+
+ /* Update Verbs specification. */
+ hdr = (struct ibv_spec_header *)flow->verbs.specs;
+ if (!hdr)
+ return;
+ for (i = 0; i != flow->verbs.attr->num_of_specs; ++i) {
+ if (hdr->type == IBV_FLOW_SPEC_ACTION_TAG) {
+ struct ibv_flow_spec_action_tag *t =
+ (struct ibv_flow_spec_action_tag *)hdr;
+
+ t->tag_id = mlx5_flow_mark_set(mark_id);
+ }
+ hdr = (struct ibv_spec_header *)((uintptr_t)hdr + hdr->size);
+ }
+}
+
+/**
+ * Convert the @p action into @p flow (or by updating the already present
+ * Flag Verbs specification) after ensuring the NIC will understand and
+ * process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] action
+ * Action configuration.
+ * @param[in, out] flow
+ * Pointer to flow structure.
+ * @param[in] flow_size
+ * Size in bytes of the available space in @p flow, if too small, nothing is
+ * written.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * On success the number of bytes consumed/necessary, if the returned value
+ * is lesser or equal to @p flow_size, the @p action has fully been
+ * converted, otherwise another call with this returned memory size should
+ * be done.
+ * On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_action_mark(const struct rte_flow_action *action,
+ struct rte_flow *flow, const size_t flow_size,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_action_mark *mark = action->conf;
+ unsigned int size = sizeof(struct ibv_flow_spec_action_tag);
+ struct ibv_flow_spec_action_tag tag = {
+ .type = IBV_FLOW_SPEC_ACTION_TAG,
+ .size = size,
+ };
+
+ if (!mark)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "configuration cannot be null");
+ if (mark->id >= MLX5_FLOW_MARK_MAX)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION_CONF,
+ &mark->id,
+ "mark id must in 0 <= id < "
+ RTE_STR(MLX5_FLOW_MARK_MAX));
+ if (flow->modifier & MLX5_FLOW_MOD_MARK)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "mark action already present");
+ if (flow->fate & MLX5_FLOW_FATE_DROP)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ action,
+ "mark is not compatible with drop"
+ " action");
+ if (flow->modifier & MLX5_FLOW_MOD_FLAG) {
+ mlx5_flow_verbs_mark_update(flow, mark->id);
+ size = 0; /**< Only an update is done in the specification. */
+ } else {
+ tag.tag_id = mlx5_flow_mark_set(mark->id);
+ if (size <= flow_size) {
+ tag.tag_id = mlx5_flow_mark_set(mark->id);
+ mlx5_flow_spec_verbs_add(flow, &tag, size);
+ }
+ }
+ flow->modifier |= MLX5_FLOW_MOD_MARK;
+ return size;
+}
+
/**
* Convert the @p action into @p flow after ensuring the NIC will understand
* and process it correctly.
@@ -1077,6 +1244,14 @@ mlx5_flow_actions(struct rte_eth_dev *dev,
switch (actions->type) {
case RTE_FLOW_ACTION_TYPE_VOID:
break;
+ case RTE_FLOW_ACTION_TYPE_FLAG:
+ ret = mlx5_flow_action_flag(actions, flow, remain,
+ error);
+ break;
+ case RTE_FLOW_ACTION_TYPE_MARK:
+ ret = mlx5_flow_action_mark(actions, flow, remain,
+ error);
+ break;
case RTE_FLOW_ACTION_TYPE_DROP:
ret = mlx5_flow_action_drop(actions, flow, remain,
error);
@@ -1170,6 +1345,79 @@ mlx5_flow_merge(struct rte_eth_dev *dev, struct rte_flow *flow,
return size;
}
+/**
+ * Mark the Rx queues mark flag if the flow has a mark or flag modifier.
+ *
+ * @param[in] dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Pointer to flow structure.
+ */
+static void
+mlx5_flow_rxq_mark_set(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ if (flow->modifier & (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK)) {
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of((*priv->rxqs)[flow->queue],
+ struct mlx5_rxq_ctrl, rxq);
+
+ rxq_ctrl->rxq.mark = 1;
+ rxq_ctrl->flow_mark_n++;
+ }
+}
+
+/**
+ * Clear the Rx queue mark associated with the @p flow if no other flow uses
+ * it with a mark request.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ * @param[in] flow
+ * Pointer to the flow.
+ */
+static void
+mlx5_flow_rxq_mark_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ if (flow->modifier & (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK)) {
+ struct mlx5_rxq_ctrl *rxq_ctrl =
+ container_of((*priv->rxqs)[flow->queue],
+ struct mlx5_rxq_ctrl, rxq);
+
+ rxq_ctrl->flow_mark_n--;
+ rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
+ }
+}
+
+/**
+ * Clear the mark bit in all Rx queues.
+ *
+ * @param dev
+ * Pointer to Ethernet device.
+ */
+static void
+mlx5_flow_rxq_mark_clear(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ unsigned int idx;
+
+ for (idx = 0, i = 0; idx != priv->rxqs_n; ++i) {
+ struct mlx5_rxq_ctrl *rxq_ctrl;
+
+ if (!(*priv->rxqs)[idx])
+ continue;
+ rxq_ctrl = container_of((*priv->rxqs)[idx],
+ struct mlx5_rxq_ctrl, rxq);
+ rxq_ctrl->flow_mark_n = 0;
+ rxq_ctrl->rxq.mark = 0;
+ ++idx;
+ }
+}
+
/**
* Validate a flow supported by the NIC.
*
@@ -1329,6 +1577,7 @@ mlx5_flow_list_create(struct rte_eth_dev *dev,
if (ret < 0)
goto error;
}
+ mlx5_flow_rxq_mark_set(dev, flow);
TAILQ_INSERT_TAIL(list, flow, next);
return flow;
error:
@@ -1373,6 +1622,7 @@ mlx5_flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
{
mlx5_flow_remove(dev, flow);
TAILQ_REMOVE(list, flow, next);
+ mlx5_flow_rxq_mark_trim(dev, flow);
rte_free(flow);
}
@@ -1410,6 +1660,7 @@ mlx5_flow_stop(struct rte_eth_dev *dev, struct mlx5_flows *list)
TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next)
mlx5_flow_remove(dev, flow);
+ mlx5_flow_rxq_mark_clear(dev);
}
/**
@@ -1434,6 +1685,7 @@ mlx5_flow_start(struct rte_eth_dev *dev, struct mlx5_flows *list)
ret = mlx5_flow_apply(dev, flow, &error);
if (ret < 0)
goto error;
+ mlx5_flow_rxq_mark_set(dev, flow);
}
return 0;
error:
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 708fdd4fa..99b769d8a 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -138,6 +138,7 @@ struct mlx5_rxq_ctrl {
unsigned int socket; /* CPU socket ID for allocations. */
unsigned int irq:1; /* Whether IRQ is enabled. */
uint16_t idx; /* Queue index. */
+ uint32_t flow_mark_n; /* Number of Mark/Flag flows using this Queue. */
};
/* Indirection table. */
--
2.18.0
next prev parent reply other threads:[~2018-07-12 9:31 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-28 11:21 [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 01/12] net/mlx5: remove flow support Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 02/12] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 03/12] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 04/12] net/mlx5: add flow queue action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 05/12] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 06/12] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 07/12] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 08/12] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 09/12] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 10/12] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 11/12] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 12/12] net/mlx5: add RSS " Nelio Laranjeiro
2018-05-28 13:32 ` [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Wiles, Keith
2018-05-28 13:47 ` Ferruh Yigit
2018-05-28 13:50 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 00/20] " Nelio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 01/20] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-02 21:53 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 02/20] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-07-03 1:07 ` Yongseok Koh
2018-07-03 7:17 ` Nélio Laranjeiro
2018-07-03 17:05 ` Yongseok Koh
2018-07-04 6:44 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 03/20] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-03 1:40 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 04/20] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-07-03 22:27 ` Yongseok Koh
2018-07-04 9:24 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 05/20] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-03 23:00 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 06/20] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-03 23:08 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 07/20] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-03 23:56 ` Yongseok Koh
2018-07-04 12:03 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 08/20] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-04 0:12 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 09/20] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-04 0:16 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 10/20] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-04 0:17 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 11/20] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-04 0:18 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 12/20] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-04 8:34 ` Yongseok Koh
2018-07-05 8:47 ` Nélio Laranjeiro
2018-07-05 19:56 ` Yongseok Koh
2018-07-06 8:23 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 13/20] net/mlx5: add RSS " Nelio Laranjeiro
2018-07-06 2:16 ` Yongseok Koh
2018-07-06 15:59 ` Nélio Laranjeiro
2018-07-06 17:35 ` Yongseok Koh
2018-07-09 13:09 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 14/20] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-06 2:18 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 15/20] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-06 8:16 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 16/20] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-06 23:14 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 17/20] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-06 23:23 ` Yongseok Koh
2018-07-09 14:53 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 18/20] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-06 23:46 ` Yongseok Koh
2018-07-09 13:58 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 19/20] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-07 0:11 ` Yongseok Koh
2018-07-09 15:00 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 20/20] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-07 1:08 ` Yongseok Koh
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-11 19:57 ` Yongseok Koh
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-11 20:00 ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Yongseok Koh
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 " Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-12 9:30 ` Nelio Laranjeiro [this message]
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-12 10:44 ` [dpdk-dev] [PATCH v4 00/21] net/mlx5: flow rework Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44069f47c18613ad644867a4c230666d71c79a6f.1531387413.git.nelio.laranjeiro@6wind.com \
--to=nelio.laranjeiro@6wind.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).