* [dpdk-dev] [PATCH] net/mlx5: add bluefield device ID @ 2018-02-25 7:20 Shahaf Shuler 2018-02-26 8:11 ` Nélio Laranjeiro 2018-05-15 6:12 ` [dpdk-dev] [PATCH v2] " Shahaf Shuler 0 siblings, 2 replies; 7+ messages in thread From: Shahaf Shuler @ 2018-02-25 7:20 UTC (permalink / raw) To: adrien.mazarguil, nelio.laranjeiro, yskoh; +Cc: dev Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> --- drivers/net/mlx5/mlx5.c | 4 ++++ drivers/net/mlx5/mlx5.h | 1 + 2 files changed, 5 insertions(+) diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 61cb93101..5345bc46f 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -1027,6 +1027,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = { PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF) }, { + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, + PCI_DEVICE_ID_MELLANOX_BLUEFIELD) + }, + { .vendor_id = 0 } }; diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index 3e2d96abc..1c9845503 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -49,6 +49,7 @@ enum { PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018, PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019, PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a, + PCI_DEVICE_ID_MELLANOX_BLUEFIELD = 0xa2d2, }; struct mlx5_xstats_ctrl { -- 2.12.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx5: add bluefield device ID 2018-02-25 7:20 [dpdk-dev] [PATCH] net/mlx5: add bluefield device ID Shahaf Shuler @ 2018-02-26 8:11 ` Nélio Laranjeiro 2018-05-15 6:12 ` [dpdk-dev] [PATCH v2] " Shahaf Shuler 1 sibling, 0 replies; 7+ messages in thread From: Nélio Laranjeiro @ 2018-02-26 8:11 UTC (permalink / raw) To: Shahaf Shuler; +Cc: adrien.mazarguil, yskoh, dev On Sun, Feb 25, 2018 at 09:20:49AM +0200, Shahaf Shuler wrote: > Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> > --- > drivers/net/mlx5/mlx5.c | 4 ++++ > drivers/net/mlx5/mlx5.h | 1 + > 2 files changed, 5 insertions(+) > > diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c > index 61cb93101..5345bc46f 100644 > --- a/drivers/net/mlx5/mlx5.c > +++ b/drivers/net/mlx5/mlx5.c > @@ -1027,6 +1027,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = { > PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF) > }, > { > + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, > + PCI_DEVICE_ID_MELLANOX_BLUEFIELD) > + }, > + { > .vendor_id = 0 > } > }; > diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h > index 3e2d96abc..1c9845503 100644 > --- a/drivers/net/mlx5/mlx5.h > +++ b/drivers/net/mlx5/mlx5.h > @@ -49,6 +49,7 @@ enum { > PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018, > PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019, > PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a, > + PCI_DEVICE_ID_MELLANOX_BLUEFIELD = 0xa2d2, > }; > > struct mlx5_xstats_ctrl { > -- > 2.12.0 Please also update: - config/common_base - doc/guides/nics/mlx5.rst - doc/guides/rel_notes/release_18_05.rst In the same commit, as it was done for commit 528a9fbec6de ("net/mlx5: support ConnectX-5 devices") Thanks, -- Nélio Laranjeiro 6WIND ^ permalink raw reply [flat|nested] 7+ messages in thread
* [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID 2018-02-25 7:20 [dpdk-dev] [PATCH] net/mlx5: add bluefield device ID Shahaf Shuler 2018-02-26 8:11 ` Nélio Laranjeiro @ 2018-05-15 6:12 ` Shahaf Shuler 2018-05-15 9:28 ` Nélio Laranjeiro 1 sibling, 1 reply; 7+ messages in thread From: Shahaf Shuler @ 2018-05-15 6:12 UTC (permalink / raw) To: yskoh, nelio.laranjeiro, adrien.mazarguil; +Cc: dev Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> --- On v2: - Updated mlx5 docs to include Bluefield product. - PCI_DEVICE_ID_MELLANOX_BLUEFIELD -> PCI_DEVICE_ID_MELLANOX_CONNECTX5BF --- config/common_base | 3 ++- doc/guides/nics/mlx5.rst | 58 ++++++++++++++++++++++++++---------------------- drivers/net/mlx5/mlx5.c | 4 ++++ drivers/net/mlx5/mlx5.h | 1 + 4 files changed, 38 insertions(+), 28 deletions(-) diff --git a/config/common_base b/config/common_base index c4dba709d1..6b0d1cbbb7 100644 --- a/config/common_base +++ b/config/common_base @@ -295,7 +295,8 @@ CONFIG_RTE_LIBRTE_MLX4_DEBUG=n CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n # -# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD +# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield +# (MLX5) PMD # CONFIG_RTE_LIBRTE_MLX5_PMD=n CONFIG_RTE_LIBRTE_MLX5_DEBUG=n diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index a7d5c90bcf..f4a127b8fd 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -6,9 +6,9 @@ MLX5 poll mode driver ===================== The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support -for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** and **Mellanox -ConnectX-5** families of 10/25/40/50/100 Gb/s adapters as well as their -virtual functions (VF) in SR-IOV context. +for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox +ConnectX-5** and **Mellanox Bluefield** families of 10/25/40/50/100 Gb/s +adapters as well as their virtual functions (VF) in SR-IOV context. Information and documentation about these adapters can be found on the `Mellanox website <http://www.mellanox.com>`__. Help is also provided by the @@ -237,8 +237,8 @@ Run-time configuration Supported on: - - x86_64 with ConnectX-4, ConnectX-4 LX and ConnectX-5. - - POWER8 and ARMv8 with ConnectX-4 LX and ConnectX-5. + - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield. + - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5 and Bluefield. - ``mprq_en`` parameter [int] @@ -304,34 +304,35 @@ Run-time configuration This option should be used in combination with ``txq_inline`` above. - On ConnectX-4, ConnectX-4 LX and ConnectX-5 without Enhanced MPW: + On ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield without + Enhanced MPW: - Disabled by default. - In case ``txq_inline`` is set recommendation is 4. - On ConnectX-5 with Enhanced MPW: + On ConnectX-5 and Bluefield with Enhanced MPW: - Set to 8 by default. - ``txq_mpw_en`` parameter [int] A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and - enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the - TX burst function to pack up multiple packets in a single descriptor - session in order to save PCI bandwidth and improve performance at the - cost of a slightly higher CPU usage. When ``txq_inline`` is set along - with ``txq_mpw_en``, TX burst function tries to copy entire packet data - on to TX descriptor instead of including pointer of packet only if there - is enough room remained in the descriptor. ``txq_inline`` sets - per-descriptor space for either pointers or inlined packets. In addition, - Enhanced MPS supports hybrid mode - mixing inlined packets and pointers - in the same descriptor. + enhanced multi-packet send (Enhanced MPS) for ConnectX-5 and Bluefiled. + MPS allows the TX burst function to pack up multiple packets in a + single descriptor session in order to save PCI bandwidth and improve + performance at the cost of a slightly higher CPU usage. When + ``txq_inline`` is set along with ``txq_mpw_en``, TX burst function tries + to copy entire packet data on to TX descriptor instead of including + pointer of packet only if there is enough room remained in the + descriptor. ``txq_inline`` sets per-descriptor space for either pointers + or inlined packets. In addition, Enhanced MPS supports hybrid mode - + mixing inlined packets and pointers in the same descriptor. This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. When those offloads are requested the MPS send function will not be used. - It is currently only supported on the ConnectX-4 Lx and ConnectX-5 + It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield families of adapters. Enabled by default. - ``txq_mpw_hdr_dseg_en`` parameter [int] @@ -352,14 +353,14 @@ Run-time configuration - ``tx_vec_en`` parameter [int] - A nonzero value enables Tx vector on ConnectX-5 only NIC if the number of + A nonzero value enables Tx vector on ConnectX-5 and Bluefield NICs if the number of global Tx queues on the port is lesser than MLX5_VPMD_MIN_TXQS. This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. When those offloads are requested the MPS send function will not be used. - Enabled by default on ConnectX-5. + Enabled by default on ConnectX-5 and Bluefield. - ``rx_vec_en`` parameter [int] @@ -422,8 +423,9 @@ DPDK and must be installed separately: - **libmlx5** - Low-level user space driver library for Mellanox ConnectX-4/ConnectX-5 - devices, it is automatically loaded by libibverbs. + Low-level user space driver library for Mellanox + ConnectX-4/ConnectX-5/Bluefield devices, it is automatically loaded + by libibverbs. This library basically implements send/receive calls to the hardware queues. @@ -437,15 +439,16 @@ DPDK and must be installed separately: Unlike most other PMDs, these modules must remain loaded and bound to their devices: - - mlx5_core: hardware driver managing Mellanox ConnectX-4/ConnectX-5 - devices and related Ethernet kernel network devices. + - mlx5_core: hardware driver managing Mellanox + ConnectX-4/ConnectX-5/Bluefield devices and related Ethernet kernel + network devices. - mlx5_ib: InifiniBand device driver. - ib_uverbs: user space driver for Verbs (entry point for libibverbs). - **Firmware update** - Mellanox OFED releases include firmware updates for ConnectX-4/ConnectX-5 - adapters. + Mellanox OFED releases include firmware updates for + ConnectX-4/ConnectX-5/Bluefield adapters. Because each release provides new features, these updates must be applied to match the kernel modules and libraries they come with. @@ -482,6 +485,7 @@ Mellanox OFED - ConnectX-4 Lx: **14.21.1000** and above. - ConnectX-5: **16.21.1000** and above. - ConnectX-5 Ex: **16.21.1000** and above. + - Bluefield: **18.23.1000** and above. While these libraries and kernel modules are available on OpenFabrics Alliance's `website <https://www.openfabrics.org/>`__ and provided by package @@ -699,7 +703,7 @@ Usage example ------------- This section demonstrates how to launch **testpmd** with Mellanox -ConnectX-4/ConnectX-5 devices managed by librte_pmd_mlx5. +ConnectX-4/ConnectX-5/Bluefield devices managed by librte_pmd_mlx5. #. Load the kernel modules: diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 8aa91cc8ed..0ce45eb852 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -1248,6 +1248,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = { PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF) }, { + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, + PCI_DEVICE_ID_MELLANOX_CONNECTX5BF) + }, + { .vendor_id = 0 } }; diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index c4c962b92d..a9c692555e 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -50,6 +50,7 @@ enum { PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018, PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019, PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a, + PCI_DEVICE_ID_MELLANOX_CONNECTX5BF = 0xa2d2, }; LIST_HEAD(mlx5_dev_list, priv); -- 2.12.0 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID 2018-05-15 6:12 ` [dpdk-dev] [PATCH v2] " Shahaf Shuler @ 2018-05-15 9:28 ` Nélio Laranjeiro 2018-05-15 10:00 ` Shahaf Shuler 2018-05-17 10:48 ` Ferruh Yigit 0 siblings, 2 replies; 7+ messages in thread From: Nélio Laranjeiro @ 2018-05-15 9:28 UTC (permalink / raw) To: Shahaf Shuler; +Cc: yskoh, adrien.mazarguil, dev On Tue, May 15, 2018 at 09:12:50AM +0300, Shahaf Shuler wrote: > Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> > --- > > On v2: > - Updated mlx5 docs to include Bluefield product. > - PCI_DEVICE_ID_MELLANOX_BLUEFIELD -> PCI_DEVICE_ID_MELLANOX_CONNECTX5BF > > --- > config/common_base | 3 ++- > doc/guides/nics/mlx5.rst | 58 ++++++++++++++++++++++++++---------------------- > drivers/net/mlx5/mlx5.c | 4 ++++ > drivers/net/mlx5/mlx5.h | 1 + > 4 files changed, 38 insertions(+), 28 deletions(-) > > diff --git a/config/common_base b/config/common_base > index c4dba709d1..6b0d1cbbb7 100644 > --- a/config/common_base > +++ b/config/common_base > @@ -295,7 +295,8 @@ CONFIG_RTE_LIBRTE_MLX4_DEBUG=n > CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n > > # > -# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD > +# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield > +# (MLX5) PMD > # > CONFIG_RTE_LIBRTE_MLX5_PMD=n > CONFIG_RTE_LIBRTE_MLX5_DEBUG=n > diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst > index a7d5c90bcf..f4a127b8fd 100644 > --- a/doc/guides/nics/mlx5.rst > +++ b/doc/guides/nics/mlx5.rst > @@ -6,9 +6,9 @@ MLX5 poll mode driver > ===================== > > The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support > -for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** and **Mellanox > -ConnectX-5** families of 10/25/40/50/100 Gb/s adapters as well as their > -virtual functions (VF) in SR-IOV context. > +for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** , **Mellanox > +ConnectX-5** and **Mellanox Bluefield** families of 10/25/40/50/100 Gb/s > +adapters as well as their virtual functions (VF) in SR-IOV context. > > Information and documentation about these adapters can be found on the > `Mellanox website <http://www.mellanox.com>`__. Help is also provided by the > @@ -237,8 +237,8 @@ Run-time configuration > > Supported on: > > - - x86_64 with ConnectX-4, ConnectX-4 LX and ConnectX-5. > - - POWER8 and ARMv8 with ConnectX-4 LX and ConnectX-5. > + - x86_64 with ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield. > + - POWER8 and ARMv8 with ConnectX-4 LX, ConnectX-5 and Bluefield. > > - ``mprq_en`` parameter [int] > > @@ -304,34 +304,35 @@ Run-time configuration > > This option should be used in combination with ``txq_inline`` above. > > - On ConnectX-4, ConnectX-4 LX and ConnectX-5 without Enhanced MPW: > + On ConnectX-4, ConnectX-4 LX, ConnectX-5 and Bluefield without > + Enhanced MPW: > > - Disabled by default. > - In case ``txq_inline`` is set recommendation is 4. > > - On ConnectX-5 with Enhanced MPW: > + On ConnectX-5 and Bluefield with Enhanced MPW: > > - Set to 8 by default. > > - ``txq_mpw_en`` parameter [int] > > A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and > - enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the > - TX burst function to pack up multiple packets in a single descriptor > - session in order to save PCI bandwidth and improve performance at the > - cost of a slightly higher CPU usage. When ``txq_inline`` is set along > - with ``txq_mpw_en``, TX burst function tries to copy entire packet data > - on to TX descriptor instead of including pointer of packet only if there > - is enough room remained in the descriptor. ``txq_inline`` sets > - per-descriptor space for either pointers or inlined packets. In addition, > - Enhanced MPS supports hybrid mode - mixing inlined packets and pointers > - in the same descriptor. > + enhanced multi-packet send (Enhanced MPS) for ConnectX-5 and Bluefiled. > + MPS allows the TX burst function to pack up multiple packets in a > + single descriptor session in order to save PCI bandwidth and improve > + performance at the cost of a slightly higher CPU usage. When > + ``txq_inline`` is set along with ``txq_mpw_en``, TX burst function tries > + to copy entire packet data on to TX descriptor instead of including > + pointer of packet only if there is enough room remained in the > + descriptor. ``txq_inline`` sets per-descriptor space for either pointers > + or inlined packets. In addition, Enhanced MPS supports hybrid mode - > + mixing inlined packets and pointers in the same descriptor. > > This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, > DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. > When those offloads are requested the MPS send function will not be used. > > - It is currently only supported on the ConnectX-4 Lx and ConnectX-5 > + It is currently only supported on the ConnectX-4 Lx, ConnectX-5 and Bluefield > families of adapters. Enabled by default. > > - ``txq_mpw_hdr_dseg_en`` parameter [int] > @@ -352,14 +353,14 @@ Run-time configuration > > - ``tx_vec_en`` parameter [int] > > - A nonzero value enables Tx vector on ConnectX-5 only NIC if the number of > + A nonzero value enables Tx vector on ConnectX-5 and Bluefield NICs if the number of > global Tx queues on the port is lesser than MLX5_VPMD_MIN_TXQS. > > This option cannot be used with certain offloads such as ``DEV_TX_OFFLOAD_TCP_TSO, > DEV_TX_OFFLOAD_VXLAN_TNL_TSO, DEV_TX_OFFLOAD_GRE_TNL_TSO, DEV_TX_OFFLOAD_VLAN_INSERT``. > When those offloads are requested the MPS send function will not be used. > > - Enabled by default on ConnectX-5. > + Enabled by default on ConnectX-5 and Bluefield. > > - ``rx_vec_en`` parameter [int] > > @@ -422,8 +423,9 @@ DPDK and must be installed separately: > > - **libmlx5** > > - Low-level user space driver library for Mellanox ConnectX-4/ConnectX-5 > - devices, it is automatically loaded by libibverbs. > + Low-level user space driver library for Mellanox > + ConnectX-4/ConnectX-5/Bluefield devices, it is automatically loaded > + by libibverbs. > > This library basically implements send/receive calls to the hardware > queues. > @@ -437,15 +439,16 @@ DPDK and must be installed separately: > Unlike most other PMDs, these modules must remain loaded and bound to > their devices: > > - - mlx5_core: hardware driver managing Mellanox ConnectX-4/ConnectX-5 > - devices and related Ethernet kernel network devices. > + - mlx5_core: hardware driver managing Mellanox > + ConnectX-4/ConnectX-5/Bluefield devices and related Ethernet kernel > + network devices. > - mlx5_ib: InifiniBand device driver. > - ib_uverbs: user space driver for Verbs (entry point for libibverbs). > > - **Firmware update** > > - Mellanox OFED releases include firmware updates for ConnectX-4/ConnectX-5 > - adapters. > + Mellanox OFED releases include firmware updates for > + ConnectX-4/ConnectX-5/Bluefield adapters. > > Because each release provides new features, these updates must be applied to > match the kernel modules and libraries they come with. > @@ -482,6 +485,7 @@ Mellanox OFED > - ConnectX-4 Lx: **14.21.1000** and above. > - ConnectX-5: **16.21.1000** and above. > - ConnectX-5 Ex: **16.21.1000** and above. > + - Bluefield: **18.23.1000** and above. > > While these libraries and kernel modules are available on OpenFabrics > Alliance's `website <https://www.openfabrics.org/>`__ and provided by package > @@ -699,7 +703,7 @@ Usage example > ------------- > > This section demonstrates how to launch **testpmd** with Mellanox > -ConnectX-4/ConnectX-5 devices managed by librte_pmd_mlx5. > +ConnectX-4/ConnectX-5/Bluefield devices managed by librte_pmd_mlx5. > > #. Load the kernel modules: > > diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c > index 8aa91cc8ed..0ce45eb852 100644 > --- a/drivers/net/mlx5/mlx5.c > +++ b/drivers/net/mlx5/mlx5.c > @@ -1248,6 +1248,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = { > PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF) > }, > { > + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, > + PCI_DEVICE_ID_MELLANOX_CONNECTX5BF) > + }, > + { > .vendor_id = 0 > } > }; > diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h > index c4c962b92d..a9c692555e 100644 > --- a/drivers/net/mlx5/mlx5.h > +++ b/drivers/net/mlx5/mlx5.h > @@ -50,6 +50,7 @@ enum { > PCI_DEVICE_ID_MELLANOX_CONNECTX5VF = 0x1018, > PCI_DEVICE_ID_MELLANOX_CONNECTX5EX = 0x1019, > PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF = 0x101a, > + PCI_DEVICE_ID_MELLANOX_CONNECTX5BF = 0xa2d2, > }; > > LIST_HEAD(mlx5_dev_list, priv); > -- > 2.12.0 > -- Nélio Laranjeiro 6WIND ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID 2018-05-15 9:28 ` Nélio Laranjeiro @ 2018-05-15 10:00 ` Shahaf Shuler 2018-05-17 10:48 ` Ferruh Yigit 1 sibling, 0 replies; 7+ messages in thread From: Shahaf Shuler @ 2018-05-15 10:00 UTC (permalink / raw) To: Nélio Laranjeiro; +Cc: Yongseok Koh, Adrien Mazarguil, dev Tuesday, May 15, 2018 12:29 PM, Nélio Laranjeiro: > Subject: Re: [PATCH v2] net/mlx5: add bluefield device ID > > On Tue, May 15, 2018 at 09:12:50AM +0300, Shahaf Shuler wrote: > > Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> > > Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Applied to next-net-mlx, thanks. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID 2018-05-15 9:28 ` Nélio Laranjeiro 2018-05-15 10:00 ` Shahaf Shuler @ 2018-05-17 10:48 ` Ferruh Yigit 2018-05-17 12:36 ` Shahaf Shuler 1 sibling, 1 reply; 7+ messages in thread From: Ferruh Yigit @ 2018-05-17 10:48 UTC (permalink / raw) To: Nélio Laranjeiro, Shahaf Shuler; +Cc: yskoh, adrien.mazarguil, dev On 5/15/2018 10:28 AM, Nélio Laranjeiro wrote: > On Tue, May 15, 2018 at 09:12:50AM +0300, Shahaf Shuler wrote: >> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> > > Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Is web patch coming to introduce the device support in https://dpdk.org/doc/nics? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID 2018-05-17 10:48 ` Ferruh Yigit @ 2018-05-17 12:36 ` Shahaf Shuler 0 siblings, 0 replies; 7+ messages in thread From: Shahaf Shuler @ 2018-05-17 12:36 UTC (permalink / raw) To: Ferruh Yigit, Nélio Laranjeiro; +Cc: Yongseok Koh, Adrien Mazarguil, dev Thursday, May 17, 2018 1:49 PM, Ferruh Yigit: > Subject: Re: [dpdk-dev] [PATCH v2] net/mlx5: add bluefield device ID > > On 5/15/2018 10:28 AM, Nélio Laranjeiro wrote: > > On Tue, May 15, 2018 at 09:12:50AM +0300, Shahaf Shuler wrote: > >> Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> > > > > Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> > > Is web patch coming to introduce the device support in > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdp > dk.org%2Fdoc%2Fnics&data=02%7C01%7Cshahafs%40mellanox.com%7Cb55 > 153d4e8ff4131d05608d5bbe3c08b%7Ca652971c7d2e4d9ba6a4d149256f461b% > 7C0%7C0%7C636621509233305840&sdata=j3AVrlQByWOrWslubG1MJyBRhuf > LuBYFjf9C1ExkQsw%3D&reserved=0? Done http://dpdk.org/ml/archives/web/2018-May/000725.html ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-05-17 12:36 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-02-25 7:20 [dpdk-dev] [PATCH] net/mlx5: add bluefield device ID Shahaf Shuler 2018-02-26 8:11 ` Nélio Laranjeiro 2018-05-15 6:12 ` [dpdk-dev] [PATCH v2] " Shahaf Shuler 2018-05-15 9:28 ` Nélio Laranjeiro 2018-05-15 10:00 ` Shahaf Shuler 2018-05-17 10:48 ` Ferruh Yigit 2018-05-17 12:36 ` Shahaf Shuler
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).