* [dpdk-dev] 答复: [PATCH] config: support 16 sockets server
@ 2017-04-19 6:23 caihe
2017-04-19 9:49 ` Ananyev, Konstantin
0 siblings, 1 reply; 5+ messages in thread
From: caihe @ 2017-04-19 6:23 UTC (permalink / raw)
To: Zhang, Jerry, wangyunjian, thomas.monjalon, zhangsha (A)
Cc: dev, Lilijun (Jerry), Zhoujingbin
We has already test on 16 node server, everything is fine, without any issue.
Testcase as follows:
I. with dpdk args -c 0xf, test pass
II. with 32 forward-lcores, each node with 2 lcores(total 16 nodes), test pass
III. with forward lcore id greater than 128, test pass
IV. with forward and master lcore on node 15, test pass
BRs
Herny
-----邮件原件-----
发件人: Zhang, Jerry [mailto:jerry.zhang@intel.com]
发送时间: 2017年4月11日 16:49
收件人: wangyunjian; thomas.monjalon@6wind.com
抄送: dev@dpdk.org; Lilijun (Jerry); Zhoujingbin; caihe
主题: RE: [PATCH] config: support 16 sockets server
On 4/7/2017 9:30 PM, Yunjian Wang wrote:
>Support 16 sockets server, such as HPE AH337A, Huawei kunlun server etc.
>Signed-off-by: Henry Cai <caihe@huawei.com>
>--
> config/common_base | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>diff --git a/config/common_base b/config/common_base index 5bdba1d..38561b6 100644
>--- a/config/common_base
>+++ b/config/common_base
>@@ -88,8 +88,8 @@ CONFIG_RTE_CACHE_LINE_SIZE=64 # Compile Environment Abstraction Layer # CONFIG_RTE_LIBRTE_EAL=y
>-CONFIG_RTE_MAX_LCORE=128
>-CONFIG_RTE_MAX_NUMA_NODES=8
>+CONFIG_RTE_MAX_LCORE=1024
>+CONFIG_RTE_MAX_NUMA_NODES=16
> CONFIG_RTE_MAX_MEMSEG=256
> CONFIG_RTE_MAX_MEMZONE=2560
> CONFIG_RTE_MAX_TAILQ=32
>--
Did you test it and make sure that there is no issue on 16 node servers?
BRs,
Jerry
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] 答复: [PATCH] config: support 16 sockets server
2017-04-19 6:23 [dpdk-dev] 答复: [PATCH] config: support 16 sockets server caihe
@ 2017-04-19 9:49 ` Ananyev, Konstantin
2017-04-30 21:01 ` Thomas Monjalon
0 siblings, 1 reply; 5+ messages in thread
From: Ananyev, Konstantin @ 2017-04-19 9:49 UTC (permalink / raw)
To: caihe, Zhang, Jerry, wangyunjian, thomas.monjalon, zhangsha (A)
Cc: dev, Lilijun (Jerry), Zhoujingbin
>
> We has already test on 16 node server, everything is fine, without any issue.
>
> Testcase as follows:
> I. with dpdk args -c 0xf, test pass
> II. with 32 forward-lcores, each node with 2 lcores(total 16 nodes), test pass
> III. with forward lcore id greater than 128, test pass
> IV. with forward and master lcore on node 15, test pass
>
That's really great to hear, but why default config have to be updated?
Most people don't run dpdk on such powerful boxes, so for them
increasing these config values would be just waste of space.
Why not create your own config instead?
Konstantin
> BRs
> Herny
>
> -----邮件原件-----
> 发件人: Zhang, Jerry [mailto:jerry.zhang@intel.com]
> 发送时间: 2017年4月11日 16:49
> 收件人: wangyunjian; thomas.monjalon@6wind.com
> 抄送: dev@dpdk.org; Lilijun (Jerry); Zhoujingbin; caihe
> 主题: RE: [PATCH] config: support 16 sockets server
>
> On 4/7/2017 9:30 PM, Yunjian Wang wrote:
> >Support 16 sockets server, such as HPE AH337A, Huawei kunlun server etc.
>
> >Signed-off-by: Henry Cai <caihe@huawei.com>
> >--
> > config/common_base | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
>
> >diff --git a/config/common_base b/config/common_base index 5bdba1d..38561b6 100644
> >--- a/config/common_base
> >+++ b/config/common_base
> >@@ -88,8 +88,8 @@ CONFIG_RTE_CACHE_LINE_SIZE=64 # Compile Environment Abstraction Layer # CONFIG_RTE_LIBRTE_EAL=y
> >-CONFIG_RTE_MAX_LCORE=128
> >-CONFIG_RTE_MAX_NUMA_NODES=8
> >+CONFIG_RTE_MAX_LCORE=1024
> >+CONFIG_RTE_MAX_NUMA_NODES=16
> > CONFIG_RTE_MAX_MEMSEG=256
> > CONFIG_RTE_MAX_MEMZONE=2560
> > CONFIG_RTE_MAX_TAILQ=32
> >--
>
> Did you test it and make sure that there is no issue on 16 node servers?
>
> BRs,
> Jerry
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] 答复: [PATCH] config: support 16 sockets server
2017-04-19 9:49 ` Ananyev, Konstantin
@ 2017-04-30 21:01 ` Thomas Monjalon
0 siblings, 0 replies; 5+ messages in thread
From: Thomas Monjalon @ 2017-04-30 21:01 UTC (permalink / raw)
To: caihe
Cc: dev, Ananyev, Konstantin, Zhang, Jerry, wangyunjian, zhangsha (A),
Lilijun (Jerry),
Zhoujingbin
19/04/2017 11:49, Ananyev, Konstantin:
>
> >
> > We has already test on 16 node server, everything is fine, without any issue.
> >
> > Testcase as follows:
> > I. with dpdk args -c 0xf, test pass
> > II. with 32 forward-lcores, each node with 2 lcores(total 16 nodes), test pass
> > III. with forward lcore id greater than 128, test pass
> > IV. with forward and master lcore on node 15, test pass
> >
>
> That's really great to hear, but why default config have to be updated?
> Most people don't run dpdk on such powerful boxes, so for them
> increasing these config values would be just waste of space.
> Why not create your own config instead?
I agree.
The default config should not set the maximum values
for the biggest machines.
Rejected
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dpdk-dev] [PATCH] config: support 16 sockets server
@ 2017-04-07 13:29 Yunjian Wang
2017-04-11 8:49 ` Zhang, Jerry
0 siblings, 1 reply; 5+ messages in thread
From: Yunjian Wang @ 2017-04-07 13:29 UTC (permalink / raw)
To: thomas.monjalon, jerry.zhang; +Cc: dev, jerry.lilijun, zhoujingbin, caihe
From: Henry Cai <caihe@huawei.com>
Support 16 sockets server, such as HPE AH337A,
Huawei kunlun server etc.
Signed-off-by: Henry Cai <caihe@huawei.com>
---
config/common_base | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/config/common_base b/config/common_base
index 5bdba1d..38561b6 100644
--- a/config/common_base
+++ b/config/common_base
@@ -88,8 +88,8 @@ CONFIG_RTE_CACHE_LINE_SIZE=64
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
-CONFIG_RTE_MAX_LCORE=128
-CONFIG_RTE_MAX_NUMA_NODES=8
+CONFIG_RTE_MAX_LCORE=1024
+CONFIG_RTE_MAX_NUMA_NODES=16
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
--
1.8.3.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] [PATCH] config: support 16 sockets server
2017-04-07 13:29 [dpdk-dev] " Yunjian Wang
@ 2017-04-11 8:49 ` Zhang, Jerry
0 siblings, 0 replies; 5+ messages in thread
From: Zhang, Jerry @ 2017-04-11 8:49 UTC (permalink / raw)
To: Yunjian Wang, thomas.monjalon; +Cc: dev, jerry.lilijun, zhoujingbin, caihe
On 4/7/2017 9:30 PM, Yunjian Wang wrote:
>Support 16 sockets server, such as HPE AH337A, Huawei kunlun server etc.
>Signed-off-by: Henry Cai <caihe@huawei.com>
>--
> config/common_base | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>diff --git a/config/common_base b/config/common_base index 5bdba1d..38561b6 100644
>--- a/config/common_base
>+++ b/config/common_base
>@@ -88,8 +88,8 @@ CONFIG_RTE_CACHE_LINE_SIZE=64 # Compile Environment Abstraction Layer # CONFIG_RTE_LIBRTE_EAL=y
>-CONFIG_RTE_MAX_LCORE=128
>-CONFIG_RTE_MAX_NUMA_NODES=8
>+CONFIG_RTE_MAX_LCORE=1024
>+CONFIG_RTE_MAX_NUMA_NODES=16
> CONFIG_RTE_MAX_MEMSEG=256
> CONFIG_RTE_MAX_MEMZONE=2560
> CONFIG_RTE_MAX_TAILQ=32
>--
Did you test it and make sure that there is no issue on 16 node servers?
BRs,
Jerry
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-04-30 21:01 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-19 6:23 [dpdk-dev] 答复: [PATCH] config: support 16 sockets server caihe
2017-04-19 9:49 ` Ananyev, Konstantin
2017-04-30 21:01 ` Thomas Monjalon
-- strict thread matches above, loose matches on Subject: below --
2017-04-07 13:29 [dpdk-dev] " Yunjian Wang
2017-04-11 8:49 ` Zhang, Jerry
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).