DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages
@ 2019-07-01 18:25 Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 01/30] lpm: fix spelling errors Stephen Hemminger
                   ` (31 more replies)
  0 siblings, 32 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Ran the codespell tool against the lib and examples.
Lots of little repeated errors fixed.

Stephen Hemminger (30):
  lpm: fix spelling errors
  eal/windows: fix comment about fnmatch
  bsd/eal: fix spelling error
  eal: fix spelling errors
  bpf: fix spelling errors
  power: fix spelling errors
  ipsec: fix spelling errors
  acl: fix spelling errors
  bbdev: fix spelling error
  eventdev: fix spelling error
  ethdev: fix spelling error
  ip_frag: fix spelling error
  examples/multi_process: fix spelling errors
  examples/l3fwd: fix misspelling of destination
  examples/performance-thread: fix spelling errors
  examples/ethtool: fix spelling errors
  examples/vmdq: fix spelling errors
  examples/bond: fix spelling errors
  examples/l3fwd-power: fix spelling errors
  examples/netmap_compat: fix spelling errors
  examples/packet_ordering: fix spelling errors
  examples/service_cores: fix spelling errors
  examples/vhost: fix spelling errors
  examples/vhost_scsi: fix spelling errors
  examples/tep_termination: fix spelling errors
  examples/vm_power_manager: fix spelling errors
  test-pmd: fix spelling errors
  test: fix multiple spelling errors
  proc-info: fix spelling error
  test-compress-perf: fix spelling errors

 app/proc-info/main.c                               |  2 +-
 app/test-compress-perf/main.c                      |  4 ++--
 app/test-pmd/cmdline.c                             | 11 ++++++-----
 app/test-pmd/config.c                              |  4 ++--
 app/test-pmd/csumonly.c                            |  2 +-
 app/test-pmd/softnicfwd.c                          |  2 +-
 app/test/test_barrier.c                            |  2 +-
 app/test/test_func_reentrancy.c                    |  6 +++---
 app/test/test_ipsec.c                              |  2 +-
 app/test/test_kni.c                                |  2 +-
 app/test/test_link_bonding.c                       |  2 +-
 app/test/test_lpm.c                                |  6 +++---
 app/test/test_lpm6.c                               | 14 +++++++-------
 app/test/test_mbuf.c                               |  2 +-
 app/test/test_mempool.c                            |  2 +-
 app/test/test_mempool_perf.c                       |  2 +-
 app/test/test_meter.c                              |  6 +++---
 app/test/test_pmd_perf.c                           |  2 +-
 app/test/test_ring.c                               |  2 +-
 app/test/test_rwlock.c                             |  2 +-
 examples/bbdev_app/main.c                          |  2 +-
 examples/bond/main.c                               |  2 +-
 examples/ethtool/lib/rte_ethtool.c                 |  2 +-
 examples/ethtool/lib/rte_ethtool.h                 |  4 ++--
 examples/ip_fragmentation/main.c                   |  2 +-
 examples/ipsec-secgw/parser.c                      |  2 +-
 examples/ipsec-secgw/test/linux_test4.sh           |  4 ++--
 examples/ipsec-secgw/test/linux_test6.sh           |  4 ++--
 examples/l3fwd-power/main.c                        |  2 +-
 examples/l3fwd/l3fwd_common.h                      |  2 +-
 examples/l3fwd/l3fwd_neon.h                        |  2 +-
 examples/l3fwd/l3fwd_sse.h                         |  2 +-
 examples/multi_process/hotplug_mp/commands.c       |  2 +-
 examples/multi_process/simple_mp/main.c            |  2 +-
 examples/multi_process/symmetric_mp/main.c         |  2 +-
 examples/netmap_compat/lib/compat_netmap.c         |  2 +-
 examples/packet_ordering/main.c                    |  2 +-
 examples/performance-thread/common/lthread_tls.c   |  2 +-
 examples/performance-thread/l3fwd-thread/main.c    |  4 ++--
 examples/service_cores/main.c                      |  2 +-
 examples/tep_termination/main.c                    |  6 +++---
 examples/vhost/main.c                              |  6 +++---
 examples/vhost_scsi/scsi.c                         |  2 +-
 examples/vhost_scsi/vhost_scsi.c                   |  2 +-
 examples/vm_power_manager/channel_monitor.c        |  2 +-
 examples/vmdq/main.c                               |  2 +-
 examples/vmdq_dcb/main.c                           |  2 +-
 lib/librte_acl/acl.h                               |  4 ++--
 lib/librte_acl/acl_bld.c                           |  2 +-
 lib/librte_acl/acl_run_avx2.h                      |  2 +-
 lib/librte_bbdev/rte_bbdev.c                       |  2 +-
 lib/librte_bpf/bpf_jit_x86.c                       |  2 +-
 lib/librte_bpf/bpf_validate.c                      |  2 +-
 lib/librte_eal/common/eal_common_fbarray.c         |  2 +-
 lib/librte_eal/common/eal_common_log.c             |  2 +-
 lib/librte_eal/common/eal_common_proc.c            |  2 +-
 lib/librte_eal/common/eal_hugepages.h              |  2 +-
 .../common/include/arch/arm/rte_cycles_32.h        |  2 +-
 .../common/include/arch/x86/rte_atomic.h           |  2 +-
 lib/librte_eal/common/include/rte_dev.h            |  2 +-
 lib/librte_eal/common/malloc_elem.c                |  2 +-
 lib/librte_eal/freebsd/eal/eal_memory.c            |  2 +-
 lib/librte_eal/linux/eal/eal_vfio.c                |  6 +++---
 lib/librte_eal/windows/eal/include/fnmatch.h       |  2 +-
 lib/librte_ethdev/rte_ethdev.c                     |  2 +-
 lib/librte_eventdev/rte_event_timer_adapter.c      |  2 +-
 lib/librte_ip_frag/rte_ipv4_reassembly.c           |  2 +-
 lib/librte_ipsec/esp_inb.c                         |  2 +-
 lib/librte_ipsec/sa.c                              |  2 +-
 lib/librte_ipsec/sa.h                              |  4 ++--
 lib/librte_lpm/rte_lpm6.c                          |  6 +++---
 lib/librte_power/power_acpi_cpufreq.c              |  6 +++---
 lib/librte_power/power_pstate_cpufreq.c            |  6 +++---
 lib/librte_power/rte_power.h                       |  2 +-
 74 files changed, 111 insertions(+), 110 deletions(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 01/30] lpm: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 02/30] eal/windows: fix comment about fnmatch Stephen Hemminger
                   ` (30 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Fix small spelling errors (found by codespell)

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_lpm/rte_lpm6.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lib/librte_lpm/rte_lpm6.c b/lib/librte_lpm/rte_lpm6.c
index a91803113649..c8bd21c8b24a 100644
--- a/lib/librte_lpm/rte_lpm6.c
+++ b/lib/librte_lpm/rte_lpm6.c
@@ -824,7 +824,7 @@ VERSION_SYMBOL(rte_lpm6_add, _v20, 2.0);
  *
  *	Returns:
  *    0 on success
- *    -ENOSPC not enought tbl8 left
+ *    -ENOSPC not enough tbl8 left
  */
 static int
 simulate_add(struct rte_lpm6 *lpm, const uint8_t *masked_ip, uint8_t depth)
@@ -854,7 +854,7 @@ simulate_add(struct rte_lpm6 *lpm, const uint8_t *masked_ip, uint8_t depth)
 	}
 
 	if (tbl8_available(lpm) < total_need_tbl_nb)
-		/* not enought tbl8 to add a rule */
+		/* not enough tbl8 to add a rule */
 		return -ENOSPC;
 
 	return 0;
@@ -1314,7 +1314,7 @@ rule_find_range(struct rte_lpm6 *lpm, const uint8_t *ip, uint8_t depth,
 		/* minus top level */
 		depth -= 24;
 
-		/* interate through levels (tbl8s)
+		/* iterate through levels (tbl8s)
 		 * until we reach the last one
 		 */
 		while (depth > 8) {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 02/30] eal/windows: fix comment about fnmatch
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 01/30] lpm: fix spelling errors Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 03/30] bsd/eal: fix spelling error Stephen Hemminger
                   ` (29 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Fix spelling error in comment, and clarify that pattern
is supposed to be shell wildcare (not regex) in case someone
ever decides to implement proper code for this.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_eal/windows/eal/include/fnmatch.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_eal/windows/eal/include/fnmatch.h b/lib/librte_eal/windows/eal/include/fnmatch.h
index 41b574312cde..b57b731e8aba 100644
--- a/lib/librte_eal/windows/eal/include/fnmatch.h
+++ b/lib/librte_eal/windows/eal/include/fnmatch.h
@@ -21,7 +21,7 @@ extern "C" {
  * with the given regular expression pattern.
  *
  * @param pattern
- *	regular expression notation decribing the pattern to match
+ *	shell wildcard describing the pattern to match
  *
  * @param string
  *	source string to searcg for the pattern
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 03/30] bsd/eal: fix spelling error
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 01/30] lpm: fix spelling errors Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 02/30] eal/windows: fix comment about fnmatch Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 04/30] eal: fix spelling errors Stephen Hemminger
                   ` (28 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Minor spelling error found by codespell

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_eal/freebsd/eal/eal_memory.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_eal/freebsd/eal/eal_memory.c b/lib/librte_eal/freebsd/eal/eal_memory.c
index 4b092e1f2122..406bbb8656fb 100644
--- a/lib/librte_eal/freebsd/eal/eal_memory.c
+++ b/lib/librte_eal/freebsd/eal/eal_memory.c
@@ -435,7 +435,7 @@ memseg_primary_init(void)
 		 *
 		 * we need (N*2)-1 segments because we cannot guarantee that
 		 * each segment will be IOVA-contiguous with the previous one,
-		 * so we will allocate more and put spaces inbetween segments
+		 * so we will allocate more and put spaces in between segments
 		 * that are non-contiguous.
 		 */
 		avail_segs = (hpi->num_pages[0] * 2) - 1;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 04/30] eal: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (2 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 03/30] bsd/eal: fix spelling error Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 05/30] bpf: " Stephen Hemminger
                   ` (27 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Lots of little spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_eal/common/eal_common_fbarray.c             | 2 +-
 lib/librte_eal/common/eal_common_log.c                 | 2 +-
 lib/librte_eal/common/eal_common_proc.c                | 2 +-
 lib/librte_eal/common/eal_hugepages.h                  | 2 +-
 lib/librte_eal/common/include/arch/arm/rte_cycles_32.h | 2 +-
 lib/librte_eal/common/include/arch/x86/rte_atomic.h    | 2 +-
 lib/librte_eal/common/include/rte_dev.h                | 2 +-
 lib/librte_eal/common/malloc_elem.c                    | 2 +-
 lib/librte_eal/linux/eal/eal_vfio.c                    | 6 +++---
 9 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/lib/librte_eal/common/eal_common_fbarray.c b/lib/librte_eal/common/eal_common_fbarray.c
index b7ddb66e9ca3..9f747e530132 100644
--- a/lib/librte_eal/common/eal_common_fbarray.c
+++ b/lib/librte_eal/common/eal_common_fbarray.c
@@ -1334,7 +1334,7 @@ fbarray_find_biggest(struct rte_fbarray *arr, unsigned int start, bool used,
 	 */
 
 	/* the API's called are thread-safe, but something may still happen
-	 * inbetween the API calls, so lock the fbarray. all other API's are
+	 * in between the API calls, so lock the fbarray. all other API's are
 	 * read-locking the fbarray, so read lock here is OK.
 	 */
 	rte_rwlock_read_lock(&arr->rwlock);
diff --git a/lib/librte_eal/common/eal_common_log.c b/lib/librte_eal/common/eal_common_log.c
index 4f6f22708379..c8f4213222cd 100644
--- a/lib/librte_eal/common/eal_common_log.c
+++ b/lib/librte_eal/common/eal_common_log.c
@@ -45,7 +45,7 @@ static struct rte_eal_opt_loglevel_list opt_loglevel_list =
 static FILE *default_log_stream;
 
 /**
- * This global structure stores some informations about the message
+ * This global structure stores some information about the message
  * that is currently being processed by one lcore
  */
 struct log_cur_msg {
diff --git a/lib/librte_eal/common/eal_common_proc.c b/lib/librte_eal/common/eal_common_proc.c
index cbe8d10fcfee..e456ae2de8da 100644
--- a/lib/librte_eal/common/eal_common_proc.c
+++ b/lib/librte_eal/common/eal_common_proc.c
@@ -1071,7 +1071,7 @@ rte_mp_request_async(struct rte_mp_msg *req, const struct timespec *ts,
 	}
 
 	if (gettimeofday(&now, NULL) < 0) {
-		RTE_LOG(ERR, EAL, "Faile to get current time\n");
+		RTE_LOG(ERR, EAL, "Failed to get current time\n");
 		rte_errno = errno;
 		return -1;
 	}
diff --git a/lib/librte_eal/common/eal_hugepages.h b/lib/librte_eal/common/eal_hugepages.h
index 4582f19cfb20..1b560d3379da 100644
--- a/lib/librte_eal/common/eal_hugepages.h
+++ b/lib/librte_eal/common/eal_hugepages.h
@@ -12,7 +12,7 @@
 #define MAX_HUGEPAGE_PATH PATH_MAX
 
 /**
- * Structure used to store informations about hugepages that we mapped
+ * Structure used to store information about hugepages that we mapped
  * through the files in hugetlbfs.
  */
 struct hugepage_file {
diff --git a/lib/librte_eal/common/include/arch/arm/rte_cycles_32.h b/lib/librte_eal/common/include/arch/arm/rte_cycles_32.h
index 859b09748c56..f79718ce8ca7 100644
--- a/lib/librte_eal/common/include/arch/arm/rte_cycles_32.h
+++ b/lib/librte_eal/common/include/arch/arm/rte_cycles_32.h
@@ -57,7 +57,7 @@ __rte_rdtsc_syscall(void)
  *      asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(29));
  *      asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r"(0x8000000f));
  *
- * which is possible only from the priviledged mode (kernel space).
+ * which is possible only from the privileged mode (kernel space).
  */
 static inline uint64_t
 __rte_rdtsc_pmccntr(void)
diff --git a/lib/librte_eal/common/include/arch/x86/rte_atomic.h b/lib/librte_eal/common/include/arch/x86/rte_atomic.h
index 148398f50ab7..b9dcd30aba9a 100644
--- a/lib/librte_eal/common/include/arch/x86/rte_atomic.h
+++ b/lib/librte_eal/common/include/arch/x86/rte_atomic.h
@@ -55,7 +55,7 @@ extern "C" {
  *
  * As pointed by Java guys, that makes possible to use lock-prefixed
  * instructions to get the same effect as mfence and on most modern HW
- * that gives a better perfomance then using mfence:
+ * that gives a better performance then using mfence:
  * https://shipilev.net/blog/2014/on-the-fence-with-dependencies/
  * Basic idea is to use lock prefixed add with some dummy memory location
  * as the destination. From their experiments 128B(2 cache lines) below
diff --git a/lib/librte_eal/common/include/rte_dev.h b/lib/librte_eal/common/include/rte_dev.h
index a01c4ad92b95..2feee78c4299 100644
--- a/lib/librte_eal/common/include/rte_dev.h
+++ b/lib/librte_eal/common/include/rte_dev.h
@@ -231,7 +231,7 @@ __attribute__((used)) = str
  *   "pci:v8086:d*:sv*:sd*"  all PCI devices supported by this driver
  *                           whose vendor id is 0x8086.
  *
- * The format of the kernel modules list is a parenthesed expression
+ * The format of the kernel modules list is a parenthesized expression
  * containing logical-and (&) and logical-or (|).
  *
  * The device pattern and the kmod expression are separated by a space.
diff --git a/lib/librte_eal/common/malloc_elem.c b/lib/librte_eal/common/malloc_elem.c
index 658c9b5b7993..2458dad413d1 100644
--- a/lib/librte_eal/common/malloc_elem.c
+++ b/lib/librte_eal/common/malloc_elem.c
@@ -171,7 +171,7 @@ malloc_elem_insert(struct malloc_elem *elem)
 		next_elem = NULL;
 		heap->last = elem;
 	} else {
-		/* the new memory is somewhere inbetween start and end */
+		/* the new memory is somewhere in between start and end */
 		uint64_t dist_from_start, dist_from_end;
 
 		dist_from_end = RTE_PTR_DIFF(heap->last, elem);
diff --git a/lib/librte_eal/linux/eal/eal_vfio.c b/lib/librte_eal/linux/eal/eal_vfio.c
index feada64c0178..60b0be76817f 100644
--- a/lib/librte_eal/linux/eal/eal_vfio.c
+++ b/lib/librte_eal/linux/eal/eal_vfio.c
@@ -1272,7 +1272,7 @@ vfio_type1_dma_mem_map(int vfio_container_fd, uint64_t vaddr, uint64_t iova,
 			 */
 			if (errno == EEXIST) {
 				RTE_LOG(DEBUG, EAL,
-					" Memory segment is allready mapped,"
+					" Memory segment is already mapped,"
 					" skipping");
 			} else {
 				RTE_LOG(ERR, EAL,
@@ -1345,7 +1345,7 @@ vfio_spapr_dma_do_map(int vfio_container_fd, uint64_t vaddr, uint64_t iova,
 			 */
 			if (errno == EBUSY) {
 				RTE_LOG(DEBUG, EAL,
-					" Memory segment is allready mapped,"
+					" Memory segment is already mapped,"
 					" skipping");
 			} else {
 				RTE_LOG(ERR, EAL,
@@ -1632,7 +1632,7 @@ vfio_dma_mem_map(struct vfio_config *vfio_cfg, uint64_t vaddr, uint64_t iova,
 
 	if (!t->dma_user_map_func) {
 		RTE_LOG(ERR, EAL,
-			"  VFIO custom DMA region maping not supported by IOMMU %s\n",
+			"  VFIO custom DMA region mapping not supported by IOMMU %s\n",
 			t->name);
 		rte_errno = ENOTSUP;
 		return -1;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 05/30] bpf: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (3 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 04/30] eal: fix spelling errors Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 06/30] power: " Stephen Hemminger
                   ` (26 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Minor typo's found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_bpf/bpf_jit_x86.c  | 2 +-
 lib/librte_bpf/bpf_validate.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/librte_bpf/bpf_jit_x86.c b/lib/librte_bpf/bpf_jit_x86.c
index f70cd6be5180..885e8d5c2b97 100644
--- a/lib/librte_bpf/bpf_jit_x86.c
+++ b/lib/librte_bpf/bpf_jit_x86.c
@@ -1074,7 +1074,7 @@ emit_epilog(struct bpf_jit_state *st)
 	uint32_t i;
 	int32_t spil, ofs;
 
-	/* if we allready have an epilog generate a jump to it */
+	/* if we already have an epilog generate a jump to it */
 	if (st->exit.num++ != 0) {
 		emit_abs_jmp(st, st->exit.off);
 		return;
diff --git a/lib/librte_bpf/bpf_validate.c b/lib/librte_bpf/bpf_validate.c
index d0e683b5b21f..17a76137818b 100644
--- a/lib/librte_bpf/bpf_validate.c
+++ b/lib/librte_bpf/bpf_validate.c
@@ -1901,7 +1901,7 @@ validate(struct bpf_verifier *bvf)
 
 		/*
 		 * construct CFG, jcc nodes have to outgoing edges,
-		 * 'exit' nodes - none, all others nodes have exaclty one
+		 * 'exit' nodes - none, all others nodes have exactly one
 		 * outgoing edge.
 		 */
 		switch (ins->code) {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 06/30] power: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (4 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 05/30] bpf: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 07/30] ipsec: " Stephen Hemminger
                   ` (25 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Minor typo's found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_power/power_acpi_cpufreq.c   | 6 +++---
 lib/librte_power/power_pstate_cpufreq.c | 6 +++---
 lib/librte_power/rte_power.h            | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/lib/librte_power/power_acpi_cpufreq.c b/lib/librte_power/power_acpi_cpufreq.c
index 7c386f891ebd..be24c2915344 100644
--- a/lib/librte_power/power_acpi_cpufreq.c
+++ b/lib/librte_power/power_acpi_cpufreq.c
@@ -30,7 +30,7 @@
 
 #define FOPEN_OR_ERR_RET(f, retval) do { \
 		if ((f) == NULL) { \
-			RTE_LOG(ERR, POWER, "File not openned\n"); \
+			RTE_LOG(ERR, POWER, "File not opened\n"); \
 			return retval; \
 		} \
 } while (0)
@@ -109,7 +109,7 @@ set_freq_internal(struct rte_power_info *pi, uint32_t idx)
 	if (idx == pi->curr_idx)
 		return 0;
 
-	POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
+	POWER_DEBUG_TRACE("Frequency[%u] %u to be set for lcore %u\n",
 			idx, pi->freqs[idx], pi->lcore_id);
 	if (fseek(pi->f, 0, SEEK_SET) < 0) {
 		RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
@@ -225,7 +225,7 @@ power_get_available_freqs(struct rte_power_info *pi)
 		goto out;
 	}
 
-	/* Store the available frequncies into power context */
+	/* Store the available frequencies into power context */
 	for (i = 0, pi->nb_freqs = 0; i < count; i++) {
 		POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
 				i, freqs[i]);
diff --git a/lib/librte_power/power_pstate_cpufreq.c b/lib/librte_power/power_pstate_cpufreq.c
index ecbcb3ac9952..8f095e0ab1bc 100644
--- a/lib/librte_power/power_pstate_cpufreq.c
+++ b/lib/librte_power/power_pstate_cpufreq.c
@@ -33,7 +33,7 @@
 
 #define FOPEN_OR_ERR_RET(f, retval) do { \
 		if ((f) == NULL) { \
-			RTE_LOG(ERR, POWER, "File not openned\n"); \
+			RTE_LOG(ERR, POWER, "File not opened\n"); \
 			return retval; \
 		} \
 } while (0)
@@ -287,7 +287,7 @@ set_freq_internal(struct pstate_power_info *pi, uint32_t idx)
 			return -1;
 		}
 
-		POWER_DEBUG_TRACE("Freqency '%u' to be set for lcore %u\n",
+		POWER_DEBUG_TRACE("Frequency '%u' to be set for lcore %u\n",
 				  target_freq, pi->lcore_id);
 
 		fflush(pi->f_cur_min);
@@ -310,7 +310,7 @@ set_freq_internal(struct pstate_power_info *pi, uint32_t idx)
 			return -1;
 		}
 
-		POWER_DEBUG_TRACE("Freqency '%u' to be set for lcore %u\n",
+		POWER_DEBUG_TRACE("Frequency '%u' to be set for lcore %u\n",
 				  target_freq, pi->lcore_id);
 
 		fflush(pi->f_cur_max);
diff --git a/lib/librte_power/rte_power.h b/lib/librte_power/rte_power.h
index 01f88588b5cf..427058b8118c 100644
--- a/lib/librte_power/rte_power.h
+++ b/lib/librte_power/rte_power.h
@@ -26,7 +26,7 @@ enum power_management_env {PM_ENV_NOT_SET, PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM,
 /**
  * Set the default power management implementation. If this is not called prior
  * to rte_power_init(), then auto-detect of the environment will take place.
- * It is thread safe. New env can be set only in unitialized state
+ * It is thread safe. New env can be set only in uninitialized state
  * (thus rte_power_unset_env must be called if different env was already set).
  *
  * @param env
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 07/30] ipsec: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (5 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 06/30] power: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 08/30] acl: " Stephen Hemminger
                   ` (24 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling error found by codespell

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/ipsec-secgw/parser.c            | 2 +-
 examples/ipsec-secgw/test/linux_test4.sh | 4 ++--
 examples/ipsec-secgw/test/linux_test6.sh | 4 ++--
 lib/librte_ipsec/esp_inb.c               | 2 +-
 lib/librte_ipsec/sa.c                    | 2 +-
 lib/librte_ipsec/sa.h                    | 4 ++--
 6 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/examples/ipsec-secgw/parser.c b/examples/ipsec-secgw/parser.c
index fc8c238fe5a5..6dd3081ffcf4 100644
--- a/examples/ipsec-secgw/parser.c
+++ b/examples/ipsec-secgw/parser.c
@@ -506,7 +506,7 @@ cfg_parse_neigh(void *parsed_result, __rte_unused struct cmdline *cl,
 	rc = parse_mac(res->mac, &mac);
 	APP_CHECK(rc == 0, st, "invalid ether addr:%s", res->mac);
 	rc = add_dst_ethaddr(res->port, &mac);
-	APP_CHECK(rc == 0, st, "invalid port numer:%hu", res->port);
+	APP_CHECK(rc == 0, st, "invalid port number:%hu", res->port);
 	if (st->status < 0)
 		return;
 }
diff --git a/examples/ipsec-secgw/test/linux_test4.sh b/examples/ipsec-secgw/test/linux_test4.sh
index d636f560482d..01a2bea4050d 100644
--- a/examples/ipsec-secgw/test/linux_test4.sh
+++ b/examples/ipsec-secgw/test/linux_test4.sh
@@ -5,7 +5,7 @@
 # ipsec-secgw (IPv4 mode) functional test script.
 #
 # Note that for most of them you required appropriate crypto PMD/device
-# to be avaialble.
+# to be available.
 # Also user has to setup properly the following environment variables:
 #  SGW_PATH - path to the ipsec-secgw binary to test
 #  REMOTE_HOST - ip/hostname of the DUT
@@ -33,7 +33,7 @@
 # I.E:
 # DUT OS(NIC1)--(ipsec)-->(NIC1)ipsec-secgw(TAP)--(plain)-->(TAP)SUT OS
 # SUT OS(TAP)--(plain)-->(TAP)psec-secgw(NIC1)--(ipsec)-->(NIC1)DUT OS
-# Then tries to perorm some data transfer using the scheme decribed above.
+# Then tries to perform some data transfer using the scheme described above.
 #
 
 DIR=`dirname $0`
diff --git a/examples/ipsec-secgw/test/linux_test6.sh b/examples/ipsec-secgw/test/linux_test6.sh
index e30f607d8c1b..66655006a336 100644
--- a/examples/ipsec-secgw/test/linux_test6.sh
+++ b/examples/ipsec-secgw/test/linux_test6.sh
@@ -5,7 +5,7 @@
 # ipsec-secgw (IPv6 mode) functional test script.
 #
 # Note that for most of them you required appropriate crypto PMD/device
-# to be avaialble.
+# to be available.
 # Also user has to setup properly the following environment variables:
 #  SGW_PATH - path to the ipsec-secgw binary to test
 #  REMOTE_HOST - ip/hostname of the DUT
@@ -34,7 +34,7 @@
 # I.E:
 # DUT OS(NIC1)--(ipsec)-->(NIC1)ipsec-secgw(TAP)--(plain)-->(TAP)SUT OS
 # SUT OS(TAP)--(plain)-->(TAP)psec-secgw(NIC1)--(ipsec)-->(NIC1)DUT OS
-# Then tries to perorm some data transfer using the scheme decribed above.
+# Then tries to perform some data transfer using the scheme described above.
 #
 
 DIR=`dirname $0`
diff --git a/lib/librte_ipsec/esp_inb.c b/lib/librte_ipsec/esp_inb.c
index 3e12ca1030f0..7f296cd247dd 100644
--- a/lib/librte_ipsec/esp_inb.c
+++ b/lib/librte_ipsec/esp_inb.c
@@ -359,7 +359,7 @@ trs_process_step3(struct rte_mbuf *mb)
 static inline void
 tun_process_step3(struct rte_mbuf *mb, uint64_t txof_msk, uint64_t txof_val)
 {
-	/* reset mbuf metatdata: L2/L3 len, packet type */
+	/* reset mbuf metadata: L2/L3 len, packet type */
 	mb->packet_type = RTE_PTYPE_UNKNOWN;
 	mb->tx_offload = (mb->tx_offload & txof_msk) | txof_val;
 
diff --git a/lib/librte_ipsec/sa.c b/lib/librte_ipsec/sa.c
index 81e3437bb5e4..cede034bb8af 100644
--- a/lib/librte_ipsec/sa.c
+++ b/lib/librte_ipsec/sa.c
@@ -126,7 +126,7 @@ ipsec_sa_size(uint64_t type, uint32_t *wnd_sz, uint32_t *nb_bucket)
 		/*
 		 * RFC 4303 recommends 64 as minimum window size.
 		 * there is no point to use ESN mode without SQN window,
-		 * so make sure we have at least 64 window when ESN is enalbed.
+		 * so make sure we have at least 64 window when ESN is enabled.
 		 */
 		wsz = ((type & RTE_IPSEC_SATP_ESN_MASK) ==
 			RTE_IPSEC_SATP_ESN_DISABLE) ?
diff --git a/lib/librte_ipsec/sa.h b/lib/librte_ipsec/sa.h
index ffb5fb4f8c32..b142e61d65a4 100644
--- a/lib/librte_ipsec/sa.h
+++ b/lib/librte_ipsec/sa.h
@@ -111,8 +111,8 @@ struct rte_ipsec_sa {
 	 * sqn and replay window
 	 * In case of SA handled by multiple threads *sqn* cacheline
 	 * could be shared by multiple cores.
-	 * To minimise perfomance impact, we try to locate in a separate
-	 * place from other frequently accesed data.
+	 * To minimize performance impact, we try to locate in a separate
+	 * place from other frequently accessed data.
 	 */
 	union {
 		union {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 08/30] acl: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (6 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 07/30] ipsec: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 09/30] bbdev: fix spelling error Stephen Hemminger
                   ` (23 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Minor typos in comments.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_acl/acl.h          | 4 ++--
 lib/librte_acl/acl_bld.c      | 2 +-
 lib/librte_acl/acl_run_avx2.h | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/lib/librte_acl/acl.h b/lib/librte_acl/acl.h
index 39d45a0c2b68..6f77b10ecfed 100644
--- a/lib/librte_acl/acl.h
+++ b/lib/librte_acl/acl.h
@@ -45,7 +45,7 @@ struct rte_acl_bitset {
  * Each transition is 64 bit value with the following format:
  * | node_type_specific : 32 | node_type : 3 | node_addr : 29 |
  * For all node types except RTE_ACL_NODE_MATCH, node_addr is an index
- * to the start of the node in the transtions array.
+ * to the start of the node in the transitions array.
  * Few different node types are used:
  * RTE_ACL_NODE_MATCH:
  * node_addr value is and index into an array that contains the return value
@@ -66,7 +66,7 @@ struct rte_acl_bitset {
  * RTE_ACL_NODE_SINGLE:
  * always transitions to the same node regardless of the input value.
  * RTE_ACL_NODE_DFA:
- * that node consits of up to 256 transitions.
+ * that node consists of up to 256 transitions.
  * In attempt to conserve space all transitions are divided into 4 consecutive
  * groups, by 64 transitions per group:
  * group64[i] contains transitions[i * 64, .. i * 64 + 63].
diff --git a/lib/librte_acl/acl_bld.c b/lib/librte_acl/acl_bld.c
index b82191f4278d..5b277db28021 100644
--- a/lib/librte_acl/acl_bld.c
+++ b/lib/librte_acl/acl_bld.c
@@ -1430,7 +1430,7 @@ acl_set_data_indexes(struct rte_acl_ctx *ctx)
 /*
  * Internal routine, performs 'build' phase of trie generation:
  * - setups build context.
- * - analizes given set of rules.
+ * - analyzes given set of rules.
  * - builds internal tree(s).
  */
 static int
diff --git a/lib/librte_acl/acl_run_avx2.h b/lib/librte_acl/acl_run_avx2.h
index d06d2e8782d6..0b8967f22e70 100644
--- a/lib/librte_acl/acl_run_avx2.h
+++ b/lib/librte_acl/acl_run_avx2.h
@@ -125,7 +125,7 @@ acl_process_matches_avx2x8(const struct rte_acl_ctx *ctx,
 	/* For each transition: put low 32 into tr_lo and high 32 into tr_hi */
 	ACL_TR_HILO(mm256, __m256, t0, t1, lo, hi);
 
-	/* Keep transitions wth NOMATCH intact. */
+	/* Keep transitions with NOMATCH intact. */
 	*tr_lo = _mm256_blendv_epi8(*tr_lo, lo, matches);
 	*tr_hi = _mm256_blendv_epi8(*tr_hi, hi, matches);
 }
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 09/30] bbdev: fix spelling error
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (7 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 08/30] acl: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 10/30] eventdev: " Stephen Hemminger
                   ` (22 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/bbdev_app/main.c    | 2 +-
 lib/librte_bbdev/rte_bbdev.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/examples/bbdev_app/main.c b/examples/bbdev_app/main.c
index 9acf666dc93d..f2f827a8d807 100644
--- a/examples/bbdev_app/main.c
+++ b/examples/bbdev_app/main.c
@@ -361,7 +361,7 @@ add_awgn(struct rte_mbuf **mbufs, uint16_t num_pkts)
 /* Encoder output to Decoder input adapter. The Decoder accepts only soft input
  * so each bit of the encoder output must be translated into one byte of LLR. If
  * Sub-block Deinterleaver is bypassed, which is the case, the padding bytes
- * must additionally be insterted at the end of each sub-block.
+ * must additionally be inserted at the end of each sub-block.
  */
 static inline void
 transform_enc_out_dec_in(struct rte_mbuf **mbufs, uint8_t *temp_buf,
diff --git a/lib/librte_bbdev/rte_bbdev.c b/lib/librte_bbdev/rte_bbdev.c
index 0c354804d106..02e52f3bd05c 100644
--- a/lib/librte_bbdev/rte_bbdev.c
+++ b/lib/librte_bbdev/rte_bbdev.c
@@ -139,7 +139,7 @@ rte_bbdev_data_alloc(void)
 }
 
 /*
- * Find data alocated for the device or if not found return first unused bbdev
+ * Find data allocated for the device or if not found return first unused bbdev
  * data. If all structures are in use and none is used by the device return
  * NULL.
  */
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 10/30] eventdev: fix spelling error
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (8 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 09/30] bbdev: fix spelling error Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 11/30] ethdev: " Stephen Hemminger
                   ` (21 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_eventdev/rte_event_timer_adapter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_eventdev/rte_event_timer_adapter.c b/lib/librte_eventdev/rte_event_timer_adapter.c
index 2f7a760ae4e1..e31fc6af6452 100644
--- a/lib/librte_eventdev/rte_event_timer_adapter.c
+++ b/lib/librte_eventdev/rte_event_timer_adapter.c
@@ -484,7 +484,7 @@ event_buffer_flush(struct event_buffer *bufp, uint8_t dev_id, uint8_t port_id,
 	head_idx = bufp->head & EVENT_BUFFER_MASK;
 	tail_idx = bufp->tail & EVENT_BUFFER_MASK;
 
-	/* Determine the largest contigous run we can attempt to enqueue to the
+	/* Determine the largest contiguous run we can attempt to enqueue to the
 	 * event device.
 	 */
 	if (head_idx > tail_idx)
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 11/30] ethdev: fix spelling error
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (9 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 10/30] eventdev: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 12/30] ip_frag: " Stephen Hemminger
                   ` (20 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 lib/librte_ethdev/rte_ethdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 31f02ec2ba3b..281bba2e2a17 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -3903,7 +3903,7 @@ rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id,
 	cb->param = user_param;
 
 	rte_spinlock_lock(&rte_eth_rx_cb_lock);
-	/* Add the callbacks at fisrt position*/
+	/* Add the callbacks at first position*/
 	cb->next = rte_eth_devices[port_id].post_rx_burst_cbs[queue_id];
 	rte_smp_wmb();
 	rte_eth_devices[port_id].post_rx_burst_cbs[queue_id] = cb;
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 12/30] ip_frag: fix spelling error
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (10 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 11/30] ethdev: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-02 15:07   ` Trybula, ArturX
  2019-07-02 15:14   ` Trybula, ArturX
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 13/30] examples/multi_process: fix spelling errors Stephen Hemminger
                   ` (19 subsequent siblings)
  31 siblings, 2 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/ip_fragmentation/main.c         | 2 +-
 lib/librte_ip_frag/rte_ipv4_reassembly.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index 85c0100f792d..eb6ca097aa7e 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -635,7 +635,7 @@ check_all_ports_link_status(uint32_t port_mask)
 	}
 }
 
-/* Check L3 packet type detection capablity of the NIC port */
+/* Check L3 packet type detection capability of the NIC port */
 static int
 check_ptype(int portid)
 {
diff --git a/lib/librte_ip_frag/rte_ipv4_reassembly.c b/lib/librte_ip_frag/rte_ipv4_reassembly.c
index b7b92ed28549..28003e42af63 100644
--- a/lib/librte_ip_frag/rte_ipv4_reassembly.c
+++ b/lib/librte_ip_frag/rte_ipv4_reassembly.c
@@ -83,7 +83,7 @@ ipv4_frag_reassemble(struct ip_frag_pkt *fp)
 
 /*
  * Process new mbuf with fragment of IPV4 packet.
- * Incoming mbuf should have it's l2_len/l3_len fields setuped correclty.
+ * Incoming mbuf should have it's l2_len/l3_len fields setuped correctly.
  * @param tbl
  *   Table where to lookup/add the fragmented packet.
  * @param mb
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 13/30] examples/multi_process: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (11 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 12/30] ip_frag: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 14/30] examples/l3fwd: fix misspelling of destination Stephen Hemminger
                   ` (18 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Minor typos caught by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/multi_process/hotplug_mp/commands.c | 2 +-
 examples/multi_process/simple_mp/main.c      | 2 +-
 examples/multi_process/symmetric_mp/main.c   | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/examples/multi_process/hotplug_mp/commands.c b/examples/multi_process/hotplug_mp/commands.c
index b068593939d8..aaf04bd5e9fa 100644
--- a/examples/multi_process/hotplug_mp/commands.c
+++ b/examples/multi_process/hotplug_mp/commands.c
@@ -178,7 +178,7 @@ static void cmd_dev_detach_parsed(void *parsed_result,
 		cmdline_printf(cl, "detached device %s\n",
 			da.name);
 	else
-		cmdline_printf(cl, "failed to dettach device %s\n",
+		cmdline_printf(cl, "failed to detach device %s\n",
 			da.name);
 }
 
diff --git a/examples/multi_process/simple_mp/main.c b/examples/multi_process/simple_mp/main.c
index e6c69d6a33a9..e27d77eafb4d 100644
--- a/examples/multi_process/simple_mp/main.c
+++ b/examples/multi_process/simple_mp/main.c
@@ -4,7 +4,7 @@
 
 /*
  * This sample application is a simple multi-process application which
- * demostrates sharing of queues and memory pools between processes, and
+ * demonstrates sharing of queues and memory pools between processes, and
  * using those queues/pools for communication between the processes.
  *
  * Application is designed to run with two processes, a primary and a
diff --git a/examples/multi_process/symmetric_mp/main.c b/examples/multi_process/symmetric_mp/main.c
index 62771e036cd7..0003dd01e2c2 100644
--- a/examples/multi_process/symmetric_mp/main.c
+++ b/examples/multi_process/symmetric_mp/main.c
@@ -3,7 +3,7 @@
  */
 
 /*
- * Sample application demostrating how to do packet I/O in a multi-process
+ * Sample application demonstrating how to do packet I/O in a multi-process
  * environment. The same code can be run as a primary process and as a
  * secondary process, just with a different proc-id parameter in each case
  * (apart from the EAL flag to indicate a secondary process).
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 14/30] examples/l3fwd: fix misspelling of destination
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (12 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 13/30] examples/multi_process: fix spelling errors Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 15/30] examples/performance-thread: fix spelling errors Stephen Hemminger
                   ` (17 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/l3fwd/l3fwd_common.h | 2 +-
 examples/l3fwd/l3fwd_neon.h   | 2 +-
 examples/l3fwd/l3fwd_sse.h    | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/examples/l3fwd/l3fwd_common.h b/examples/l3fwd/l3fwd_common.h
index 7d83ff641a24..9a695a9190b2 100644
--- a/examples/l3fwd/l3fwd_common.h
+++ b/examples/l3fwd/l3fwd_common.h
@@ -51,7 +51,7 @@ rfc1812_process(struct rte_ipv4_hdr *ipv4_hdr, uint16_t *dp, uint32_t ptype)
 #endif /* DO_RFC_1812_CHECKS */
 
 /*
- * We group consecutive packets with the same destionation port into one burst.
+ * We group consecutive packets with the same destination port into one burst.
  * To avoid extra latency this is done together with some other packet
  * processing, but after we made a final decision about packet's destination.
  * To do this we maintain:
diff --git a/examples/l3fwd/l3fwd_neon.h b/examples/l3fwd/l3fwd_neon.h
index 86ac5971d7f2..e3d33a52298a 100644
--- a/examples/l3fwd/l3fwd_neon.h
+++ b/examples/l3fwd/l3fwd_neon.h
@@ -64,7 +64,7 @@ processx4_step3(struct rte_mbuf *pkt[FWDSTEP], uint16_t dst_port[FWDSTEP])
 
 /*
  * Group consecutive packets with the same destination port in bursts of 4.
- * Suppose we have array of destionation ports:
+ * Suppose we have array of destination ports:
  * dst_port[] = {a, b, c, d,, e, ... }
  * dp1 should contain: <a, b, c, d>, dp2: <b, c, d, e>.
  * We doing 4 comparisons at once and the result is 4 bit mask.
diff --git a/examples/l3fwd/l3fwd_sse.h b/examples/l3fwd/l3fwd_sse.h
index bb565ed54632..d5a717e18cbd 100644
--- a/examples/l3fwd/l3fwd_sse.h
+++ b/examples/l3fwd/l3fwd_sse.h
@@ -64,7 +64,7 @@ processx4_step3(struct rte_mbuf *pkt[FWDSTEP], uint16_t dst_port[FWDSTEP])
 
 /*
  * Group consecutive packets with the same destination port in bursts of 4.
- * Suppose we have array of destionation ports:
+ * Suppose we have array of destination ports:
  * dst_port[] = {a, b, c, d,, e, ... }
  * dp1 should contain: <a, b, c, d>, dp2: <b, c, d, e>.
  * We doing 4 comparisons at once and the result is 4 bit mask.
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 15/30] examples/performance-thread: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (13 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 14/30] examples/l3fwd: fix misspelling of destination Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 16/30] examples/ethtool: " Stephen Hemminger
                   ` (16 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/performance-thread/common/lthread_tls.c | 2 +-
 examples/performance-thread/l3fwd-thread/main.c  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/examples/performance-thread/common/lthread_tls.c b/examples/performance-thread/common/lthread_tls.c
index 07de6cafabf5..21515829895c 100644
--- a/examples/performance-thread/common/lthread_tls.c
+++ b/examples/performance-thread/common/lthread_tls.c
@@ -214,7 +214,7 @@ void _lthread_tls_alloc(struct lthread *lt)
 	tls->root_sched = (THIS_SCHED);
 	lt->tls = tls;
 
-	/* allocate data for TLS varaiables using RTE_PER_LTHREAD macros */
+	/* allocate data for TLS variables using RTE_PER_LTHREAD macros */
 	if (sizeof(void *) < (uint64_t)RTE_PER_LTHREAD_SECTION_SIZE) {
 		lt->per_lthread_data =
 		    _lthread_objcache_alloc((THIS_SCHED)->per_lthread_cache);
diff --git a/examples/performance-thread/l3fwd-thread/main.c b/examples/performance-thread/l3fwd-thread/main.c
index dd468958aa62..641e289838af 100644
--- a/examples/performance-thread/l3fwd-thread/main.c
+++ b/examples/performance-thread/l3fwd-thread/main.c
@@ -1523,7 +1523,7 @@ processx4_step3(struct rte_mbuf *pkt[FWDSTEP], uint16_t dst_port[FWDSTEP])
 }
 
 /*
- * We group consecutive packets with the same destionation port into one burst.
+ * We group consecutive packets with the same destination port into one burst.
  * To avoid extra latency this is done together with some other packet
  * processing, but after we made a final decision about packet's destination.
  * To do this we maintain:
@@ -1548,7 +1548,7 @@ processx4_step3(struct rte_mbuf *pkt[FWDSTEP], uint16_t dst_port[FWDSTEP])
 
 /*
  * Group consecutive packets with the same destination port in bursts of 4.
- * Suppose we have array of destionation ports:
+ * Suppose we have array of destination ports:
  * dst_port[] = {a, b, c, d,, e, ... }
  * dp1 should contain: <a, b, c, d>, dp2: <b, c, d, e>.
  * We doing 4 comparisons at once and the result is 4 bit mask.
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 16/30] examples/ethtool: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (14 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 15/30] examples/performance-thread: fix spelling errors Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-02 15:42   ` Trybula, ArturX
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 17/30] examples/vmdq: " Stephen Hemminger
                   ` (15 subsequent siblings)
  31 siblings, 1 reply; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/ethtool/lib/rte_ethtool.c | 2 +-
 examples/ethtool/lib/rte_ethtool.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c
index 571c4e5aa52c..ec543055e483 100644
--- a/examples/ethtool/lib/rte_ethtool.c
+++ b/examples/ethtool/lib/rte_ethtool.c
@@ -376,7 +376,7 @@ rte_ethtool_net_set_rx_mode(uint16_t port_id)
 	rte_eth_dev_info_get(port_id, &dev_info);
 	num_vfs = dev_info.max_vfs;
 
-	/* Set VF vf_rx_mode, VF unsupport status is discard */
+	/* Set VF vf_rx_mode, VF unsupported status is discard */
 	for (vf = 0; vf < num_vfs; vf++) {
 #ifdef RTE_LIBRTE_IXGBE_PMD
 		rte_pmd_ixgbe_set_vf_rxmode(port_id, vf,
diff --git a/examples/ethtool/lib/rte_ethtool.h b/examples/ethtool/lib/rte_ethtool.h
index f17709663644..d27e0102b1ca 100644
--- a/examples/ethtool/lib/rte_ethtool.h
+++ b/examples/ethtool/lib/rte_ethtool.h
@@ -189,7 +189,7 @@ int rte_ethtool_get_module_eeprom(uint16_t port_id,
 
 /**
  * Retrieve the Ethernet device pause frame configuration according to
- * parameter attributes desribed by ethtool data structure,
+ * parameter attributes described by ethtool data structure,
  * ethtool_pauseparam.
  *
  * @param port_id
@@ -209,7 +209,7 @@ int rte_ethtool_get_pauseparam(uint16_t port_id,
 
 /**
  * Setting the Ethernet device pause frame configuration according to
- * parameter attributes desribed by ethtool data structure, ethtool_pauseparam.
+ * parameter attributes described by ethtool data structure, ethtool_pauseparam.
  *
  * @param port_id
  *   The port identifier of the Ethernet device.
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 17/30] examples/vmdq: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (15 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 16/30] examples/ethtool: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 18/30] examples/bond: " Stephen Hemminger
                   ` (14 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/vmdq/main.c     | 2 +-
 examples/vmdq_dcb/main.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/examples/vmdq/main.c b/examples/vmdq/main.c
index 7281ffd7fb14..63d5f85bbc8a 100644
--- a/examples/vmdq/main.c
+++ b/examples/vmdq/main.c
@@ -60,7 +60,7 @@ static uint32_t enabled_port_mask;
 static uint32_t num_queues = 8;
 static uint32_t num_pools = 8;
 
-/* empty vmdq configuration structure. Filled in programatically */
+/* empty vmdq configuration structure. Filled in programmatically */
 static const struct rte_eth_conf vmdq_conf_default = {
 	.rxmode = {
 		.mq_mode        = ETH_MQ_RX_VMDQ_ONLY,
diff --git a/examples/vmdq_dcb/main.c b/examples/vmdq_dcb/main.c
index 389000327685..74de72ca2fae 100644
--- a/examples/vmdq_dcb/main.c
+++ b/examples/vmdq_dcb/main.c
@@ -66,7 +66,7 @@ static uint16_t num_queues, num_vmdq_queues;
 static uint16_t vmdq_pool_base, vmdq_queue_base;
 static uint8_t rss_enable;
 
-/* empty vmdq+dcb configuration structure. Filled in programatically */
+/* empty vmdq+dcb configuration structure. Filled in programmatically */
 static const struct rte_eth_conf vmdq_dcb_conf_default = {
 	.rxmode = {
 		.mq_mode        = ETH_MQ_RX_VMDQ_DCB,
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 18/30] examples/bond: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (16 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 17/30] examples/vmdq: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 19/30] examples/l3fwd-power: " Stephen Hemminger
                   ` (13 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/bond/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/examples/bond/main.c b/examples/bond/main.c
index 1c0df9d46797..9d81c269b7f8 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -375,7 +375,7 @@ static int lcore_main(__attribute__((unused)) void *arg1)
 						struct rte_ether_hdr *);
 			ether_type = eth_hdr->ether_type;
 			if (ether_type == rte_cpu_to_be_16(RTE_ETHER_TYPE_VLAN))
-				printf("VLAN taged frame, offset:");
+				printf("VLAN tagged frame, offset:");
 			offset = get_vlan_offset(eth_hdr, &ether_type);
 			if (offset > 0)
 				printf("%d\n", offset);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 19/30] examples/l3fwd-power: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (17 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 18/30] examples/bond: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 20/30] examples/netmap_compat: " Stephen Hemminger
                   ` (12 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/l3fwd-power/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index 99c1208ce14c..15522b2f6a9e 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -469,7 +469,7 @@ signal_exit_now(int sigtype)
 		rte_exit(EXIT_SUCCESS, "User forced exit\n");
 }
 
-/*  Freqency scale down timer callback */
+/*  Frequency scale down timer callback */
 static void
 power_timer_cb(__attribute__((unused)) struct rte_timer *tim,
 			  __attribute__((unused)) void *arg)
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 20/30] examples/netmap_compat: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (18 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 19/30] examples/l3fwd-power: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 21/30] examples/packet_ordering: " Stephen Hemminger
                   ` (11 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/netmap_compat/lib/compat_netmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/examples/netmap_compat/lib/compat_netmap.c b/examples/netmap_compat/lib/compat_netmap.c
index 10a43794383c..12988410db75 100644
--- a/examples/netmap_compat/lib/compat_netmap.c
+++ b/examples/netmap_compat/lib/compat_netmap.c
@@ -700,7 +700,7 @@ rte_netmap_init_port(uint16_t portid, const struct rte_netmap_port_conf *conf)
 
 	if (ret < 0) {
 		RTE_LOG(ERR, USER1,
-			"Couldn't ot adjust number of descriptors for port %u\n",
+			"Couldn't adjust number of descriptors for port %u\n",
 			portid);
 		return ret;
 	}
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 21/30] examples/packet_ordering: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (19 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 20/30] examples/netmap_compat: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 22/30] examples/service_cores: " Stephen Hemminger
                   ` (10 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/packet_ordering/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/examples/packet_ordering/main.c b/examples/packet_ordering/main.c
index ca312029e219..d4827382bfb9 100644
--- a/examples/packet_ordering/main.c
+++ b/examples/packet_ordering/main.c
@@ -631,7 +631,7 @@ main(int argc, char **argv)
 	if (ret < 0)
 		return -1;
 
-	/* Check if we have enought cores */
+	/* Check if we have enough cores */
 	if (rte_lcore_count() < 3)
 		rte_exit(EXIT_FAILURE, "Error, This application needs at "
 				"least 3 logical cores to run:\n"
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 22/30] examples/service_cores: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (20 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 21/30] examples/packet_ordering: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-02 15:51   ` Trybula, ArturX
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 23/30] examples/vhost: " Stephen Hemminger
                   ` (9 subsequent siblings)
  31 siblings, 1 reply; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/service_cores/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/examples/service_cores/main.c b/examples/service_cores/main.c
index c7c792810d99..7642127d3a85 100644
--- a/examples/service_cores/main.c
+++ b/examples/service_cores/main.c
@@ -119,7 +119,7 @@ apply_profile(int profile_id)
 	const uint8_t core_off = 1;
 
 	if (p->num_cores > rte_lcore_count() + 1) {
-		printf("insufficent cores to run (%s)",
+		printf("insufficient cores to run (%s)",
 			p->name);
 		return;
 	}
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 23/30] examples/vhost: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (21 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 22/30] examples/service_cores: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 24/30] examples/vhost_scsi: " Stephen Hemminger
                   ` (8 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/vhost/main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 0961db0803b9..62c33138d2f3 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -105,7 +105,7 @@ static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
 static char *socket_files;
 static int nb_sockets;
 
-/* empty vmdq configuration structure. Filled in programatically */
+/* empty vmdq configuration structure. Filled in programmatically */
 static struct rte_eth_conf vmdq_conf_default = {
 	.rxmode = {
 		.mq_mode        = ETH_MQ_RX_VMDQ_ONLY,
@@ -1109,7 +1109,7 @@ switch_worker(void *arg __rte_unused)
 	struct vhost_dev *vdev;
 	struct mbuf_table *tx_q;
 
-	RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+	RTE_LOG(INFO, VHOST_DATA, "Processing on Core %u started\n", lcore_id);
 
 	tx_q = &lcore_tx_queue[lcore_id];
 	for (i = 0; i < rte_lcore_count(); i++) {
@@ -1153,7 +1153,7 @@ switch_worker(void *arg __rte_unused)
 
 /*
  * Remove a device from the specific data core linked list and from the
- * main linked list. Synchonization  occurs through the use of the
+ * main linked list. Synchronization  occurs through the use of the
  * lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
  * of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
  */
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 24/30] examples/vhost_scsi: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (22 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 23/30] examples/vhost: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-02 16:01   ` Trybula, ArturX
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 25/30] examples/tep_termination: " Stephen Hemminger
                   ` (7 subsequent siblings)
  31 siblings, 1 reply; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/vhost_scsi/scsi.c       | 2 +-
 examples/vhost_scsi/vhost_scsi.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/examples/vhost_scsi/scsi.c b/examples/vhost_scsi/scsi.c
index b1529afdccb4..060c3b61bcd2 100644
--- a/examples/vhost_scsi/scsi.c
+++ b/examples/vhost_scsi/scsi.c
@@ -70,7 +70,7 @@ vhost_bdev_scsi_set_naa_ieee_extended(const char *name, uint8_t *buf)
 	local_value = *(uint64_t *)buf;
 	/*
 	 * see spc3r23 7.6.3.6.2,
-	 *  NAA IEEE Extended identifer format
+	 *  NAA IEEE Extended identiifier format
 	 */
 	local_value &= 0x0fff000000ffffffull;
 	/* NAA 02, and 00 03 47 for IEEE Intel */
diff --git a/examples/vhost_scsi/vhost_scsi.c b/examples/vhost_scsi/vhost_scsi.c
index 513af0cca4bc..14385be56ae2 100644
--- a/examples/vhost_scsi/vhost_scsi.c
+++ b/examples/vhost_scsi/vhost_scsi.c
@@ -191,7 +191,7 @@ vhost_scsi_bdev_construct(const char *bdev_name, const char *bdev_serial,
 	/* use memory as disk storage space */
 	bdev->data = rte_zmalloc(NULL, blk_cnt * blk_size, 0);
 	if (!bdev->data) {
-		fprintf(stderr, "no enough reseverd huge memory for disk\n");
+		fprintf(stderr, "no enough reserved huge memory for disk\n");
 		return NULL;
 	}
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 25/30] examples/tep_termination: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (23 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 24/30] examples/vhost_scsi: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 26/30] examples/vm_power_manager: " Stephen Hemminger
                   ` (6 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/tep_termination/main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index 9d8ab17ddc86..57e65a8822ca 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -596,7 +596,7 @@ switch_worker(__rte_unused void *arg)
 	uint16_t tx_count;
 	uint32_t retry = 0;
 
-	RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+	RTE_LOG(INFO, VHOST_DATA, "Processing on Core %u started\n", lcore_id);
 	lcore_ll = lcore_info[lcore_id].lcore_ll;
 	prev_tsc = 0;
 
@@ -872,7 +872,7 @@ init_data_ll(void)
 
 /**
  * Remove a device from the specific data core linked list and
- * from the main linked list. Synchonization occurs through the use
+ * from the main linked list. Synchronization occurs through the use
  * of the lcore dev_removal_flag.
  */
 static void
@@ -1150,7 +1150,7 @@ main(int argc, char *argv[])
 		if (rte_lcore_is_enabled(lcore_id))
 			lcore_ids[core_id++] = lcore_id;
 
-	/* set the number of swithcing cores available */
+	/* set the number of switching cores available */
 	nb_switching_cores = rte_lcore_count()-1;
 
 	/* Get the number of physical ports. */
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 26/30] examples/vm_power_manager: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (24 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 25/30] examples/tep_termination: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 27/30] test-pmd: " Stephen Hemminger
                   ` (5 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/vm_power_manager/channel_monitor.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
index aab19ba57112..5d85ee1c6f36 100644
--- a/examples/vm_power_manager/channel_monitor.c
+++ b/examples/vm_power_manager/channel_monitor.c
@@ -368,7 +368,7 @@ get_pcpu_to_control(struct policy *pol)
 
 	/*
 	 * So now that we're handling virtual and physical cores, we need to
-	 * differenciate between them when adding them to the branch monitor.
+	 * differentiate between them when adding them to the branch monitor.
 	 * Virtual cores need to be converted to physical cores.
 	 */
 	if (pol->pkt.core_type == CORE_TYPE_VIRTUAL) {
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 27/30] test-pmd: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (25 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 26/30] examples/vm_power_manager: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 28/30] test: fix multiple " Stephen Hemminger
                   ` (4 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Multiple spelling problems found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/test-pmd/cmdline.c    | 11 ++++++-----
 app/test-pmd/config.c     |  4 ++--
 app/test-pmd/csumonly.c   |  2 +-
 app/test-pmd/softnicfwd.c |  2 +-
 4 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index d1e0d4402c94..85db61e0033c 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -100,7 +100,7 @@ static void cmd_help_brief_parsed(__attribute__((unused)) void *parsed_result,
 		"    help ports                      : Configuring ports.\n"
 		"    help registers                  : Reading and setting port registers.\n"
 		"    help filters                    : Filters configuration help.\n"
-		"    help traffic_management         : Traffic Management commmands.\n"
+		"    help traffic_management         : Traffic Management commands.\n"
 		"    help all                        : All of the above sections.\n\n"
 	);
 
@@ -3503,7 +3503,7 @@ parse_item_list(char* str, const char* item_name, unsigned int max_items,
 		return nb_item;
 
 	/*
-	 * Then, check that all values in the list are differents.
+	 * Then, check that all values in the list are different.
 	 * No optimization here...
 	 */
 	for (i = 0; i < nb_item; i++) {
@@ -5010,7 +5010,7 @@ cmd_gso_size_parsed(void *parsed_result,
 
 	if (test_done == 0) {
 		printf("Before setting GSO segsz, please first"
-				" stop fowarding\n");
+				" stop forwarding\n");
 		return;
 	}
 
@@ -6942,7 +6942,7 @@ cmd_link_flow_ctrl_set_parsed(void *parsed_result,
 
 	ret = rte_eth_dev_flow_ctrl_set(res->port_id, &fc_conf);
 	if (ret != 0)
-		printf("bad flow contrl parameter, return code = %d \n", ret);
+		printf("bad flow control parameter, return code = %d\n", ret);
 }
 
 /* *** SETUP ETHERNET PRIORITY FLOW CONTROL *** */
@@ -6990,7 +6990,8 @@ cmd_priority_flow_ctrl_set_parsed(void *parsed_result,
 
 	ret = rte_eth_dev_priority_flow_ctrl_set(res->port_id, &pfc_conf);
 	if (ret != 0)
-		printf("bad priority flow contrl parameter, return code = %d \n", ret);
+		printf("bad priority flow control parameter, return code = %d\n",
+		       ret);
 }
 
 cmdline_parse_token_string_t cmd_pfc_set_set =
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index ab458c8d2837..5ab71d1eaf45 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1745,7 +1745,7 @@ port_rss_reta_info(portid_t port_id,
 }
 
 /*
- * Displays the RSS hash functions of a port, and, optionaly, the RSS hash
+ * Displays the RSS hash functions of a port, and, optionally, the RSS hash
  * key of the port.
  */
 void
@@ -3492,7 +3492,7 @@ mcast_addr_pool_remove(struct rte_port *port, uint32_t addr_idx)
 {
 	port->mc_addr_nb--;
 	if (addr_idx == port->mc_addr_nb) {
-		/* No need to recompact the set of multicast addressses. */
+		/* No need to recompact the set of multicast addresses. */
 		if (port->mc_addr_nb == 0) {
 			/* free the pool of multicast addresses. */
 			free(port->mc_addr_pool);
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index e1cb7fb708b7..1ec2d8f62712 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -685,7 +685,7 @@ pkt_copy_split(const struct rte_mbuf *pkt)
  *
  * The testpmd command line for this forward engine sets the flags
  * TESTPMD_TX_OFFLOAD_* in ports[tx_port].tx_ol_flags. They control
- * wether a checksum must be calculated in software or in hardware. The
+ * whether a checksum must be calculated in software or in hardware. The
  * IP, UDP, TCP and SCTP flags always concern the inner layer. The
  * OUTER_IP is only useful for tunnel packets.
  */
diff --git a/app/test-pmd/softnicfwd.c b/app/test-pmd/softnicfwd.c
index 94e6669d3852..1890ab96938b 100644
--- a/app/test-pmd/softnicfwd.c
+++ b/app/test-pmd/softnicfwd.c
@@ -277,7 +277,7 @@ softport_tm_subport_node_add(portid_t port_id,
 		snp.nonleaf.n_sp_priorities = 1;
 		snp.stats_mask = STATS_MASK_DEFAULT;
 
-		/* Add Node to TM Hiearchy */
+		/* Add Node to TM Hierarchy */
 		if (rte_tm_node_add(port_id,
 				h->subport_node_id[i],
 				subport_parent_node_id,
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 28/30] test: fix multiple spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (26 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 27/30] test-pmd: " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 29/30] proc-info: fix spelling error Stephen Hemminger
                   ` (3 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/test/test_barrier.c         |  2 +-
 app/test/test_func_reentrancy.c |  6 +++---
 app/test/test_ipsec.c           |  2 +-
 app/test/test_kni.c             |  2 +-
 app/test/test_link_bonding.c    |  2 +-
 app/test/test_lpm.c             |  6 +++---
 app/test/test_lpm6.c            | 14 +++++++-------
 app/test/test_mbuf.c            |  2 +-
 app/test/test_mempool.c         |  2 +-
 app/test/test_mempool_perf.c    |  2 +-
 app/test/test_meter.c           |  6 +++---
 app/test/test_pmd_perf.c        |  2 +-
 app/test/test_ring.c            |  2 +-
 app/test/test_rwlock.c          |  2 +-
 14 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/app/test/test_barrier.c b/app/test/test_barrier.c
index 43b5f6232c6d..1ef2b6e45228 100644
--- a/app/test/test_barrier.c
+++ b/app/test/test_barrier.c
@@ -66,7 +66,7 @@ struct plock_test {
 struct lcore_plock_test {
 	struct plock_test *pt[2]; /* shared, lock-protected data */
 	uint64_t sum[2];          /* local copy of the shared data */
-	uint64_t iter;            /* number of iterations to perfom */
+	uint64_t iter;            /* number of iterations to perform */
 	uint32_t lc;              /* given lcore id */
 };
 
diff --git a/app/test/test_func_reentrancy.c b/app/test/test_func_reentrancy.c
index 99ad902a2488..4767c0cfad9a 100644
--- a/app/test/test_func_reentrancy.c
+++ b/app/test/test_func_reentrancy.c
@@ -242,7 +242,7 @@ hash_create_free(__attribute__((unused)) void *arg)
 			rte_atomic32_inc(&obj_count);
 	}
 
-	/* create mutiple times simultaneously */
+	/* create multiple times simultaneously */
 	for (i = 0; i < MAX_ITER_MULTI; i++) {
 		snprintf(hash_name, sizeof(hash_name), "fr_test_%d_%d", lcore_self, i);
 		hash_params.name = hash_name;
@@ -306,7 +306,7 @@ fbk_create_free(__attribute__((unused)) void *arg)
 			rte_atomic32_inc(&obj_count);
 	}
 
-	/* create mutiple fbk tables simultaneously */
+	/* create multiple fbk tables simultaneously */
 	for (i = 0; i < MAX_ITER_MULTI; i++) {
 		snprintf(fbk_name, sizeof(fbk_name), "fr_test_%d_%d", lcore_self, i);
 		fbk_params.name = fbk_name;
@@ -368,7 +368,7 @@ lpm_create_free(__attribute__((unused)) void *arg)
 			rte_atomic32_inc(&obj_count);
 	}
 
-	/* create mutiple fbk tables simultaneously */
+	/* create multiple fbk tables simultaneously */
 	for (i = 0; i < MAX_LPM_ITER_TIMES; i++) {
 		snprintf(lpm_name, sizeof(lpm_name), "fr_test_%d_%d", lcore_self, i);
 		lpm = rte_lpm_create(lpm_name, SOCKET_ID_ANY, &config);
diff --git a/app/test/test_ipsec.c b/app/test/test_ipsec.c
index 83f789508fe5..f3792c2ade23 100644
--- a/app/test/test_ipsec.c
+++ b/app/test/test_ipsec.c
@@ -650,7 +650,7 @@ create_crypto_session(struct ipsec_unitest_params *ut,
 	if (s == NULL)
 		return -ENOMEM;
 
-	/* initiliaze SA crypto session for device */
+	/* initialaze SA crypto session for device */
 	rc = rte_cryptodev_sym_session_init(dev_id, s,
 			ut->crypto_xforms, qp->mp_session_private);
 	if (rc == 0) {
diff --git a/app/test/test_kni.c b/app/test/test_kni.c
index 7a65de179b17..6ea8df675e6b 100644
--- a/app/test/test_kni.c
+++ b/app/test/test_kni.c
@@ -556,7 +556,7 @@ test_kni(void)
 	}
 	closedir(dir);
 
-	/* Initialize KNI subsytem */
+	/* Initialize KNI subsystem */
 	rte_kni_init(KNI_TEST_MAX_PORTS);
 
 	if (test_kni_allocate_lcores() < 0) {
diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index 938fafca3a95..754dede86e27 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -2920,7 +2920,7 @@ test_balance_tx_burst_slave_tx_fail(void)
 	first_tx_fail_idx = TEST_BAL_SLAVE_TX_FAIL_BURST_SIZE_1 -
 			TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT;
 
-	/* copy mbuf referneces for expected transmission failures */
+	/* copy mbuf references for expected transmission failures */
 	for (i = 0; i < TEST_BAL_SLAVE_TX_FAIL_PACKETS_COUNT; i++)
 		expected_fail_pkts[i] = pkts_burst_1[i + first_tx_fail_idx];
 
diff --git a/app/test/test_lpm.c b/app/test/test_lpm.c
index e969fe05100c..88a12fba3454 100644
--- a/app/test/test_lpm.c
+++ b/app/test/test_lpm.c
@@ -173,7 +173,7 @@ test3(void)
 	status = rte_lpm_add(NULL, ip, depth, next_hop);
 	TEST_LPM_ASSERT(status < 0);
 
-	/*Create vaild lpm to use in rest of test. */
+	/*Create valid lpm to use in rest of test. */
 	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, &config);
 	TEST_LPM_ASSERT(lpm != NULL);
 
@@ -211,7 +211,7 @@ test4(void)
 	status = rte_lpm_delete(NULL, ip, depth);
 	TEST_LPM_ASSERT(status < 0);
 
-	/*Create vaild lpm to use in rest of test. */
+	/*Create valid lpm to use in rest of test. */
 	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, &config);
 	TEST_LPM_ASSERT(lpm != NULL);
 
@@ -249,7 +249,7 @@ test5(void)
 	status = rte_lpm_lookup(NULL, ip, &next_hop_return);
 	TEST_LPM_ASSERT(status < 0);
 
-	/*Create vaild lpm to use in rest of test. */
+	/*Create valid lpm to use in rest of test. */
 	lpm = rte_lpm_create(__func__, SOCKET_ID_ANY, &config);
 	TEST_LPM_ASSERT(lpm != NULL);
 
diff --git a/app/test/test_lpm6.c b/app/test/test_lpm6.c
index 670aadb40eb3..1b788386a083 100644
--- a/app/test/test_lpm6.c
+++ b/app/test/test_lpm6.c
@@ -262,7 +262,7 @@ test4(void)
 	status = rte_lpm6_add(NULL, ip, depth, next_hop);
 	TEST_LPM_ASSERT(status < 0);
 
-	/*Create vaild lpm to use in rest of test. */
+	/*Create valid lpm to use in rest of test. */
 	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
 	TEST_LPM_ASSERT(lpm != NULL);
 
@@ -300,7 +300,7 @@ test5(void)
 	status = rte_lpm6_delete(NULL, ip, depth);
 	TEST_LPM_ASSERT(status < 0);
 
-	/*Create vaild lpm to use in rest of test. */
+	/*Create valid lpm to use in rest of test. */
 	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
 	TEST_LPM_ASSERT(lpm != NULL);
 
@@ -338,7 +338,7 @@ test6(void)
 	status = rte_lpm6_lookup(NULL, ip, &next_hop_return);
 	TEST_LPM_ASSERT(status < 0);
 
-	/*Create vaild lpm to use in rest of test. */
+	/*Create valid lpm to use in rest of test. */
 	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
 	TEST_LPM_ASSERT(lpm != NULL);
 
@@ -376,7 +376,7 @@ test7(void)
 	status = rte_lpm6_lookup_bulk_func(NULL, ip, next_hop_return, 10);
 	TEST_LPM_ASSERT(status < 0);
 
-	/*Create vaild lpm to use in rest of test. */
+	/*Create valid lpm to use in rest of test. */
 	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
 	TEST_LPM_ASSERT(lpm != NULL);
 
@@ -414,7 +414,7 @@ test8(void)
 	status = rte_lpm6_delete_bulk_func(NULL, ip, depth, 10);
 	TEST_LPM_ASSERT(status < 0);
 
-	/*Create vaild lpm to use in rest of test. */
+	/*Create valid lpm to use in rest of test. */
 	lpm = rte_lpm6_create(__func__, SOCKET_ID_ANY, &config);
 	TEST_LPM_ASSERT(lpm != NULL);
 
@@ -434,7 +434,7 @@ test8(void)
 /*
  * Call add, lookup and delete for a single rule with depth < 24.
  * Check all the combinations for the first three bytes that result in a hit.
- * Delete the rule and check that the same test returs a miss.
+ * Delete the rule and check that the same test returns a miss.
  */
 int32_t
 test9(void)
@@ -1739,7 +1739,7 @@ test27(void)
  * Call add, lookup and delete for a single rule with maximum 21bit next_hop
  * size.
  * Check that next_hop returned from lookup is equal to provisioned value.
- * Delete the rule and check that the same test returs a miss.
+ * Delete the rule and check that the same test returns a miss.
  */
 int32_t
 test28(void)
diff --git a/app/test/test_mbuf.c b/app/test/test_mbuf.c
index 2a97afe2044a..b81ebe346b55 100644
--- a/app/test/test_mbuf.c
+++ b/app/test/test_mbuf.c
@@ -803,7 +803,7 @@ test_refcnt_mbuf(void)
 		tref += refcnt_lcore[slave];
 
 	if (tref != refcnt_lcore[master])
-		rte_panic("refernced mbufs: %u, freed mbufs: %u\n",
+		rte_panic("referenced mbufs: %u, freed mbufs: %u\n",
 		          tref, refcnt_lcore[master]);
 
 	rte_mempool_dump(stdout, refcnt_pool);
diff --git a/app/test/test_mempool.c b/app/test/test_mempool.c
index 7738c73dbe72..b45b627b3fb2 100644
--- a/app/test/test_mempool.c
+++ b/app/test/test_mempool.c
@@ -561,7 +561,7 @@ test_mempool(void)
 	if (test_mempool_basic_ex(mp_nocache) < 0)
 		goto err;
 
-	/* mempool operation test based on single producer and single comsumer */
+	/* mempool operation test based on single producer and single consumer */
 	if (test_mempool_sp_sc() < 0)
 		goto err;
 
diff --git a/app/test/test_mempool_perf.c b/app/test/test_mempool_perf.c
index 4c877834e7b8..2586c69a8ec4 100644
--- a/app/test/test_mempool_perf.c
+++ b/app/test/test_mempool_perf.c
@@ -89,7 +89,7 @@ static rte_atomic32_t synchro;
 static unsigned n_get_bulk;
 static unsigned n_put_bulk;
 
-/* number of objects retrived from mempool before putting them back */
+/* number of objects retrieved from mempool before putting them back */
 static unsigned n_keep;
 
 /* number of enqueues / dequeues */
diff --git a/app/test/test_meter.c b/app/test/test_meter.c
index f6fe6494ab63..15d5a4839b4b 100644
--- a/app/test/test_meter.c
+++ b/app/test/test_meter.c
@@ -444,7 +444,7 @@ tm_test_srtcm_color_aware_check(void)
 	  * if using blind check
 	  */
 
-	/* previouly have a green, test points should keep unchanged */
+	/* previously have a green, test points should keep unchanged */
 	in[0] = in[1] = in[2] = in[3] = RTE_COLOR_GREEN;
 	out[0] = RTE_COLOR_GREEN;
 	out[1] = RTE_COLOR_YELLOW;
@@ -551,7 +551,7 @@ tm_test_trtcm_color_aware_check(void)
 	  * if using blind check
 	  */
 
-	/* previouly have a green, test points should keep unchanged */
+	/* previously have a green, test points should keep unchanged */
 	in[0] = in[1] = in[2] = in[3] = RTE_COLOR_GREEN;
 	out[0] = RTE_COLOR_GREEN;
 	out[1] = RTE_COLOR_YELLOW;
@@ -648,7 +648,7 @@ tm_test_trtcm_rfc4115_color_aware_check(void)
 	  * if using blind check
 	  */
 
-	/* previouly have a green, test points should keep unchanged */
+	/* previously have a green, test points should keep unchanged */
 	in[0] = in[1] = in[2] = in[3] = RTE_COLOR_GREEN;
 	out[0] = RTE_COLOR_GREEN;
 	out[1] = RTE_COLOR_YELLOW;
diff --git a/app/test/test_pmd_perf.c b/app/test/test_pmd_perf.c
index 4f9fc0d876f7..2b33bdd7f5ad 100644
--- a/app/test/test_pmd_perf.c
+++ b/app/test/test_pmd_perf.c
@@ -744,7 +744,7 @@ test_pmd_perf(void)
 				"rte_eth_dev_start: err=%d, port=%d\n",
 				ret, portid);
 
-		/* always eanble promiscuous */
+		/* always enable promiscuous */
 		rte_eth_promiscuous_enable(portid);
 
 		lcore_conf[slave_id].portlist[num++] = portid;
diff --git a/app/test/test_ring.c b/app/test/test_ring.c
index aaf1e70ad841..7f60857dc7e4 100644
--- a/app/test/test_ring.c
+++ b/app/test/test_ring.c
@@ -655,7 +655,7 @@ test_lookup_null(void)
 	struct rte_ring *rlp = rte_ring_lookup("ring_not_found");
 	if (rlp ==NULL)
 	if (rte_errno != ENOENT){
-		printf( "test failed to returnn error on null pointer\n");
+		printf("test failed to return error on null pointer\n");
 		return -1;
 	}
 	return 0;
diff --git a/app/test/test_rwlock.c b/app/test/test_rwlock.c
index 40f91759c269..2f4ff1d27462 100644
--- a/app/test/test_rwlock.c
+++ b/app/test/test_rwlock.c
@@ -461,7 +461,7 @@ try_rwlock_test_rda(void)
 {
 	try_test_reset();
 
-	/* start read test on all avaialble lcores */
+	/* start read test on all available lcores */
 	rte_eal_mp_remote_launch(try_read_lcore, NULL, CALL_MASTER);
 	rte_eal_mp_wait_lcore();
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 29/30] proc-info: fix spelling error
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (27 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 28/30] test: fix multiple " Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 30/30] test-compress-perf: fix spelling errors Stephen Hemminger
                   ` (2 subsequent siblings)
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/proc-info/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/app/proc-info/main.c b/app/proc-info/main.c
index a89b51bb3fa2..cc7f69a50b8c 100644
--- a/app/proc-info/main.c
+++ b/app/proc-info/main.c
@@ -714,7 +714,7 @@ show_port(void)
 			}
 		}
 
-		printf("  - cyrpto context\n");
+		printf("  - crypto context\n");
 		void *p_ctx = rte_eth_dev_get_sec_ctx(i);
 		printf("\t  -- security context - %p\n", p_ctx);
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [dpdk-dev] [PATCH 30/30] test-compress-perf: fix spelling errors
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (28 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 29/30] proc-info: fix spelling error Stephen Hemminger
@ 2019-07-01 18:25 ` Stephen Hemminger
  2019-07-01 18:53 ` [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages David Marchand
  2019-07-16 11:07 ` Thomas Monjalon
  31 siblings, 0 replies; 39+ messages in thread
From: Stephen Hemminger @ 2019-07-01 18:25 UTC (permalink / raw)
  To: dev; +Cc: Stephen Hemminger

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 app/test-compress-perf/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/app/test-compress-perf/main.c b/app/test-compress-perf/main.c
index c2a45d130145..0081ff38b076 100644
--- a/app/test-compress-perf/main.c
+++ b/app/test-compress-perf/main.c
@@ -68,7 +68,7 @@ comp_perf_check_capabilities(struct comp_test_data *test_data)
 
 	uint64_t comp_flags = cap->comp_feature_flags;
 
-	/* Huffman enconding */
+	/* Huffman encoding */
 	if (test_data->huffman_enc == RTE_COMP_HUFFMAN_FIXED &&
 			(comp_flags & RTE_COMP_FF_HUFFMAN_FIXED) == 0) {
 		RTE_LOG(ERR, USER1,
@@ -124,7 +124,7 @@ find_buf_size(uint32_t input_size)
 	 * power of 2 but also should be enough to store incompressible data
 	 */
 
-	/* We're looking for nearest power of 2 buffer size, which is greather
+	/* We're looking for nearest power of 2 buffer size, which is greater
 	 * than input_size
 	 */
 	uint32_t size =
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (29 preceding siblings ...)
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 30/30] test-compress-perf: fix spelling errors Stephen Hemminger
@ 2019-07-01 18:53 ` David Marchand
  2019-07-16 11:07 ` Thomas Monjalon
  31 siblings, 0 replies; 39+ messages in thread
From: David Marchand @ 2019-07-01 18:53 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: dev

On Mon, Jul 1, 2019 at 8:26 PM Stephen Hemminger <stephen@networkplumber.org>
wrote:

> Ran the codespell tool against the lib and examples.
> Lots of little repeated errors fixed.
>
> Stephen Hemminger (30):
>   lpm: fix spelling errors
>   eal/windows: fix comment about fnmatch
>   bsd/eal: fix spelling error
>   eal: fix spelling errors
>   bpf: fix spelling errors
>   power: fix spelling errors
>   ipsec: fix spelling errors
>   acl: fix spelling errors
>   bbdev: fix spelling error
>   eventdev: fix spelling error
>   ethdev: fix spelling error
>   ip_frag: fix spelling error
>   examples/multi_process: fix spelling errors
>   examples/l3fwd: fix misspelling of destination
>   examples/performance-thread: fix spelling errors
>   examples/ethtool: fix spelling errors
>   examples/vmdq: fix spelling errors
>   examples/bond: fix spelling errors
>   examples/l3fwd-power: fix spelling errors
>   examples/netmap_compat: fix spelling errors
>   examples/packet_ordering: fix spelling errors
>   examples/service_cores: fix spelling errors
>   examples/vhost: fix spelling errors
>   examples/vhost_scsi: fix spelling errors
>   examples/tep_termination: fix spelling errors
>   examples/vm_power_manager: fix spelling errors
>   test-pmd: fix spelling errors
>   test: fix multiple spelling errors
>   proc-info: fix spelling error
>   test-compress-perf: fix spelling errors
>

If we are not going to backport those, we might as well squash this as a
single patch.

-- 
David Marchand

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [dpdk-dev] [PATCH 12/30] ip_frag: fix spelling error
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 12/30] ip_frag: " Stephen Hemminger
@ 2019-07-02 15:07   ` Trybula, ArturX
  2019-07-02 15:14   ` Trybula, ArturX
  1 sibling, 0 replies; 39+ messages in thread
From: Trybula, ArturX @ 2019-07-02 15:07 UTC (permalink / raw)
  To: Stephen Hemminger, dev; +Cc: Trahe, Fiona



-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Stephen Hemminger
Sent: Monday, July 1, 2019 20:25
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH 12/30] ip_frag: fix spelling error

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/ip_fragmentation/main.c         | 2 +-
 lib/librte_ip_frag/rte_ipv4_reassembly.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index 85c0100f792d..eb6ca097aa7e 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -635,7 +635,7 @@ check_all_ports_link_status(uint32_t port_mask)
 	}
 }
 
-/* Check L3 packet type detection capablity of the NIC port */
+/* Check L3 packet type detection capability of the NIC port */
 static int
 check_ptype(int portid)
 {
diff --git a/lib/librte_ip_frag/rte_ipv4_reassembly.c b/lib/librte_ip_frag/rte_ipv4_reassembly.c
index b7b92ed28549..28003e42af63 100644
--- a/lib/librte_ip_frag/rte_ipv4_reassembly.c
+++ b/lib/librte_ip_frag/rte_ipv4_reassembly.c
@@ -83,7 +83,7 @@ ipv4_frag_reassemble(struct ip_frag_pkt *fp)
 
 /*
  * Process new mbuf with fragment of IPV4 packet.
- * Incoming mbuf should have it's l2_len/l3_len fields setuped correclty.
+ * Incoming mbuf should have it's l2_len/l3_len fields setuped correctly.

[Artur] should be without apostrophe:  "... have its ...." 

  * @param tbl
  *   Table where to lookup /add the fragmented packet.
  * @param mb
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [dpdk-dev] [PATCH 12/30] ip_frag: fix spelling error
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 12/30] ip_frag: " Stephen Hemminger
  2019-07-02 15:07   ` Trybula, ArturX
@ 2019-07-02 15:14   ` Trybula, ArturX
  1 sibling, 0 replies; 39+ messages in thread
From: Trybula, ArturX @ 2019-07-02 15:14 UTC (permalink / raw)
  To: Stephen Hemminger, dev; +Cc: Trahe, Fiona



-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Stephen Hemminger
Sent: Monday, July 1, 2019 20:25
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH 12/30] ip_frag: fix spelling error

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/ip_fragmentation/main.c         | 2 +-
 lib/librte_ip_frag/rte_ipv4_reassembly.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index 85c0100f792d..eb6ca097aa7e 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -635,7 +635,7 @@ check_all_ports_link_status(uint32_t port_mask)
 	}
 }
 
-/* Check L3 packet type detection capablity of the NIC port */
+/* Check L3 packet type detection capability of the NIC port */
 static int
 check_ptype(int portid)
 {
diff --git a/lib/librte_ip_frag/rte_ipv4_reassembly.c b/lib/librte_ip_frag/rte_ipv4_reassembly.c
index b7b92ed28549..28003e42af63 100644
--- a/lib/librte_ip_frag/rte_ipv4_reassembly.c
+++ b/lib/librte_ip_frag/rte_ipv4_reassembly.c
@@ -83,7 +83,7 @@ ipv4_frag_reassemble(struct ip_frag_pkt *fp)
 
 /*
  * Process new mbuf with fragment of IPV4 packet.
- * Incoming mbuf should have it's l2_len/l3_len fields setuped correclty.
+ * Incoming mbuf should have it's l2_len/l3_len fields setuped correctly.

[Artur] "Incoming mbuf should have its l2_len/l3_len fields set up correctly." Isn't it better?

  * @param tbl
  *   Table where to lookup/add the fragmented packet.
  * @param mb
-- 
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [dpdk-dev] [PATCH 16/30] examples/ethtool: fix spelling errors
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 16/30] examples/ethtool: " Stephen Hemminger
@ 2019-07-02 15:42   ` Trybula, ArturX
  0 siblings, 0 replies; 39+ messages in thread
From: Trybula, ArturX @ 2019-07-02 15:42 UTC (permalink / raw)
  To: Stephen Hemminger, dev; +Cc: Trahe, Fiona



-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Stephen Hemminger
Sent: Monday, July 1, 2019 20:25
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH 16/30] examples/ethtool: fix spelling errors

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/ethtool/lib/rte_ethtool.c | 2 +-  examples/ethtool/lib/rte_ethtool.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/examples/ethtool/lib/rte_ethtool.c b/examples/ethtool/lib/rte_ethtool.c
index 571c4e5aa52c..ec543055e483 100644
--- a/examples/ethtool/lib/rte_ethtool.c
+++ b/examples/ethtool/lib/rte_ethtool.c
@@ -376,7 +376,7 @@ rte_ethtool_net_set_rx_mode(uint16_t port_id)
 	rte_eth_dev_info_get(port_id, &dev_info);
 	num_vfs = dev_info.max_vfs;
 
-	/* Set VF vf_rx_mode, VF unsupport status is discard */
+	/* Set VF vf_rx_mode, VF unsupported status is discard */

[Artur] "... is discarded"?

 	for (vf = 0; vf < num_vfs; vf++) {
 #ifdef RTE_LIBRTE_IXGBE_PMD
 		rte_pmd_ixgbe_set_vf_rxmode(port_id, vf, diff --git a/examples/ethtool/lib/rte_ethtool.h b/examples/ethtool/lib/rte_ethtool.h
index f17709663644..d27e0102b1ca 100644
--- a/examples/ethtool/lib/rte_ethtool.h
+++ b/examples/ethtool/lib/rte_ethtool.h
@@ -189,7 +189,7 @@ int rte_ethtool_get_module_eeprom(uint16_t port_id,
 
 /**
  * Retrieve the Ethernet device pause frame configuration according to
- * parameter attributes desribed by ethtool data structure,
+ * parameter attributes described by ethtool data structure,
  * ethtool_pauseparam.
  *
  * @param port_id
@@ -209,7 +209,7 @@ int rte_ethtool_get_pauseparam(uint16_t port_id,
 
 /**
  * Setting the Ethernet device pause frame configuration according to
- * parameter attributes desribed by ethtool data structure, ethtool_pauseparam.
+ * parameter attributes described by ethtool data structure, ethtool_pauseparam.
  *
  * @param port_id
  *   The port identifier of the Ethernet device.
--
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [dpdk-dev] [PATCH 22/30] examples/service_cores: fix spelling errors
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 22/30] examples/service_cores: " Stephen Hemminger
@ 2019-07-02 15:51   ` Trybula, ArturX
  0 siblings, 0 replies; 39+ messages in thread
From: Trybula, ArturX @ 2019-07-02 15:51 UTC (permalink / raw)
  To: Stephen Hemminger, dev; +Cc: Trahe, Fiona



-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Stephen Hemminger
Sent: Monday, July 1, 2019 20:25
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH 22/30] examples/service_cores: fix spelling errors

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/service_cores/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/examples/service_cores/main.c b/examples/service_cores/main.c index c7c792810d99..7642127d3a85 100644
--- a/examples/service_cores/main.c
+++ b/examples/service_cores/main.c
@@ -119,7 +119,7 @@ apply_profile(int profile_id)
 	const uint8_t core_off = 1;
 
 	if (p->num_cores > rte_lcore_count() + 1) {
-		printf("insufficent cores to run (%s)",
+		printf("insufficient cores to run (%s)",

[Artur] "insufficient number of cores..." ?

 			p->name);
 		return;
 	}
--
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [dpdk-dev] [PATCH 24/30] examples/vhost_scsi: fix spelling errors
  2019-07-01 18:25 ` [dpdk-dev] [PATCH 24/30] examples/vhost_scsi: " Stephen Hemminger
@ 2019-07-02 16:01   ` Trybula, ArturX
  0 siblings, 0 replies; 39+ messages in thread
From: Trybula, ArturX @ 2019-07-02 16:01 UTC (permalink / raw)
  To: Stephen Hemminger, dev; +Cc: Trahe, Fiona



-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Stephen Hemminger
Sent: Monday, July 1, 2019 20:26
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>
Subject: [dpdk-dev] [PATCH 24/30] examples/vhost_scsi: fix spelling errors

Spelling errors found by codespell.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 examples/vhost_scsi/scsi.c       | 2 +-
 examples/vhost_scsi/vhost_scsi.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/examples/vhost_scsi/scsi.c b/examples/vhost_scsi/scsi.c index b1529afdccb4..060c3b61bcd2 100644
--- a/examples/vhost_scsi/scsi.c
+++ b/examples/vhost_scsi/scsi.c
@@ -70,7 +70,7 @@ vhost_bdev_scsi_set_naa_ieee_extended(const char *name, uint8_t *buf)
 	local_value = *(uint64_t *)buf;
 	/*
 	 * see spc3r23 7.6.3.6.2,
-	 *  NAA IEEE Extended identifer format
+	 *  NAA IEEE Extended identiifier format

[Artur] "... identifier format"?

 	 */
 	local_value &= 0x0fff000000ffffffull;
 	/* NAA 02, and 00 03 47 for IEEE Intel */ diff --git a/examples/vhost_scsi/vhost_scsi.c b/examples/vhost_scsi/vhost_scsi.c
index 513af0cca4bc..14385be56ae2 100644
--- a/examples/vhost_scsi/vhost_scsi.c
+++ b/examples/vhost_scsi/vhost_scsi.c
@@ -191,7 +191,7 @@ vhost_scsi_bdev_construct(const char *bdev_name, const char *bdev_serial,
 	/* use memory as disk storage space */
 	bdev->data = rte_zmalloc(NULL, blk_cnt * blk_size, 0);
 	if (!bdev->data) {
-		fprintf(stderr, "no enough reseverd huge memory for disk\n");
+		fprintf(stderr, "no enough reserved huge memory for disk\n");

[Artur] "Not enough huge memory reserved for disk" ?

 		return NULL;
 	}
 
--
2.20.1


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages
  2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
                   ` (30 preceding siblings ...)
  2019-07-01 18:53 ` [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages David Marchand
@ 2019-07-16 11:07 ` Thomas Monjalon
  2019-07-31 14:11   ` Thomas Monjalon
  31 siblings, 1 reply; 39+ messages in thread
From: Thomas Monjalon @ 2019-07-16 11:07 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: dev

01/07/2019 20:25, Stephen Hemminger:
> Ran the codespell tool against the lib and examples.
> Lots of little repeated errors fixed.

Please could you send a v2 addresing comments?
I think it can be only all squashed in one patch.




^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages
  2019-07-16 11:07 ` Thomas Monjalon
@ 2019-07-31 14:11   ` Thomas Monjalon
  0 siblings, 0 replies; 39+ messages in thread
From: Thomas Monjalon @ 2019-07-31 14:11 UTC (permalink / raw)
  To: Stephen Hemminger; +Cc: dev

16/07/2019 13:07, Thomas Monjalon:
> 01/07/2019 20:25, Stephen Hemminger:
> > Ran the codespell tool against the lib and examples.
> > Lots of little repeated errors fixed.
> 
> Please could you send a v2 addresing comments?
> I think it can be only all squashed in one patch.

Stephen, is it the right time for it?
Please squash all in one patch for v2.
Thanks



^ permalink raw reply	[flat|nested] 39+ messages in thread

end of thread, other threads:[~2019-07-31 14:11 UTC | newest]

Thread overview: 39+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-01 18:25 [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 01/30] lpm: fix spelling errors Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 02/30] eal/windows: fix comment about fnmatch Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 03/30] bsd/eal: fix spelling error Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 04/30] eal: fix spelling errors Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 05/30] bpf: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 06/30] power: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 07/30] ipsec: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 08/30] acl: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 09/30] bbdev: fix spelling error Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 10/30] eventdev: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 11/30] ethdev: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 12/30] ip_frag: " Stephen Hemminger
2019-07-02 15:07   ` Trybula, ArturX
2019-07-02 15:14   ` Trybula, ArturX
2019-07-01 18:25 ` [dpdk-dev] [PATCH 13/30] examples/multi_process: fix spelling errors Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 14/30] examples/l3fwd: fix misspelling of destination Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 15/30] examples/performance-thread: fix spelling errors Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 16/30] examples/ethtool: " Stephen Hemminger
2019-07-02 15:42   ` Trybula, ArturX
2019-07-01 18:25 ` [dpdk-dev] [PATCH 17/30] examples/vmdq: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 18/30] examples/bond: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 19/30] examples/l3fwd-power: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 20/30] examples/netmap_compat: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 21/30] examples/packet_ordering: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 22/30] examples/service_cores: " Stephen Hemminger
2019-07-02 15:51   ` Trybula, ArturX
2019-07-01 18:25 ` [dpdk-dev] [PATCH 23/30] examples/vhost: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 24/30] examples/vhost_scsi: " Stephen Hemminger
2019-07-02 16:01   ` Trybula, ArturX
2019-07-01 18:25 ` [dpdk-dev] [PATCH 25/30] examples/tep_termination: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 26/30] examples/vm_power_manager: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 27/30] test-pmd: " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 28/30] test: fix multiple " Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 29/30] proc-info: fix spelling error Stephen Hemminger
2019-07-01 18:25 ` [dpdk-dev] [PATCH 30/30] test-compress-perf: fix spelling errors Stephen Hemminger
2019-07-01 18:53 ` [dpdk-dev] [PATCH 00/30] fix spelling errors in comments and messages David Marchand
2019-07-16 11:07 ` Thomas Monjalon
2019-07-31 14:11   ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).