From: "Qiu, Michael" <michael.qiu@intel.com>
To: "He, Shaopeng" <shaopeng.he@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking
Date: Thu, 22 Oct 2015 01:23:50 +0000 [thread overview]
Message-ID: <533710CFB86FA344BFBF2D6802E6028621B501A8@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <FB82FCC69332B84596FE0CEC3C131094AEA381@shsmsx102.ccr.corp.intel.com>
On 2015/10/15 19:07, He, Shaopeng wrote:
> Hi, Michael
>
>> -----Original Message-----
>> From: Qiu, Michael
>> Sent: Thursday, October 15, 2015 2:28 PM
>> To: He, Shaopeng; dev@dpdk.org
>> Subject: Re: [dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking
>>
>> On 2015/9/30 15:29, Shaopeng He wrote:
>>> Add multi-queue checking in device configure process.
>>> Currently, VMDQ and RSS are supported.
>>>
>>> Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
>>> ---
>>> drivers/net/fm10k/fm10k_ethdev.c | 44
>>> ++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 44 insertions(+)
>>>
>>> diff --git a/drivers/net/fm10k/fm10k_ethdev.c
>>> b/drivers/net/fm10k/fm10k_ethdev.c
>>> index a69c990..082937d 100644
>>> --- a/drivers/net/fm10k/fm10k_ethdev.c
>>> +++ b/drivers/net/fm10k/fm10k_ethdev.c
>>> @@ -283,12 +283,56 @@ tx_queue_disable(struct fm10k_hw *hw,
>> uint16_t
>>> qnum) }
>>>
>>> static int
>>> +fm10k_check_mq_mode(struct rte_eth_dev *dev) {
>>> + enum rte_eth_rx_mq_mode rx_mq_mode = dev->data-
>>> dev_conf.rxmode.mq_mode;
>>> + struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data-
>>> dev_private);
>>> + struct rte_eth_vmdq_rx_conf *vmdq_conf;
>>> + uint16_t nb_rx_q = dev->data->nb_rx_queues;
>>> +
>>> + vmdq_conf = &dev->data->dev_conf.rx_adv_conf.vmdq_rx_conf;
>>> +
>>> + if (rx_mq_mode & ETH_MQ_RX_DCB_FLAG) {
>>> + PMD_INIT_LOG(ERR, "DCB mode is not supported.");
>>> + return -EINVAL;
>>> + }
>>> +
>>> + if (!(rx_mq_mode & ETH_MQ_RX_VMDQ_FLAG))
>>> + return 0;
>>> +
>>> + if (hw->mac.type == fm10k_mac_vf) {
>>> + PMD_INIT_LOG(ERR, "VMDQ mode is not supported in VF.");
>>> + return -EINVAL;
>>> + }
>> I think vf check should be the first one, then we do not need check dcb and
>> VMDq flag.
>>
>> Thanks,
>> Michael
> Thanks for the comments. There is a case of RSS support on VF, if vf check be
> the first one, it will return fail, which is not correct.
OK, you are right.
Thanks,
Michael
> Thanks,
> --Shaopeng
>>> +
>>> + /* Check VMDQ queue pool number */
>>> + if (vmdq_conf->nb_queue_pools >
>>> + sizeof(vmdq_conf->pool_map[0].pools) * CHAR_BIT
>> ||
>>> + vmdq_conf->nb_queue_pools > nb_rx_q) {
>>> + PMD_INIT_LOG(ERR, "Too many of queue pools: %d",
>>> + vmdq_conf->nb_queue_pools);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int
>>> fm10k_dev_configure(struct rte_eth_dev *dev) {
>>> + int ret;
>>> +
>>> PMD_INIT_FUNC_TRACE();
>>>
>>> if (dev->data->dev_conf.rxmode.hw_strip_crc == 0)
>>> PMD_INIT_LOG(WARNING, "fm10k always strip CRC");
>>> + /* multipe queue mode checking */
>>> + ret = fm10k_check_mq_mode(dev);
>>> + if (ret != 0) {
>>> + PMD_DRV_LOG(ERR, "fm10k_check_mq_mode fails
>> with %d.",
>>> + ret);
>>> + return ret;
>>> + }
>>>
>>> return 0;
>>> }
>
next prev parent reply other threads:[~2015-10-22 1:24 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-30 7:28 [dpdk-dev] [PATCH 0/3] fm10k: add VMDQ support Shaopeng He
2015-09-30 7:28 ` [dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking Shaopeng He
2015-10-15 6:27 ` Qiu, Michael
2015-10-15 11:07 ` He, Shaopeng
2015-10-22 1:23 ` Qiu, Michael [this message]
2015-09-30 7:28 ` [dpdk-dev] [PATCH 2/3] fm10k: add VMDQ support in MAC/VLAN filter Shaopeng He
2015-09-30 7:28 ` [dpdk-dev] [PATCH 3/3] fm10k: add VMDQ support in multi-queue configure Shaopeng He
2015-10-10 3:22 ` [dpdk-dev] [PATCH v2 0/4] fm10k: add VMDQ support Shaopeng He
2015-10-10 3:22 ` [dpdk-dev] [PATCH v2 1/4] fm10k: add multi-queue checking Shaopeng He
2015-10-10 3:22 ` [dpdk-dev] [PATCH v2 2/4] fm10k: add VMDQ support in MAC/VLAN filter Shaopeng He
2015-10-10 3:22 ` [dpdk-dev] [PATCH v2 3/4] fm10k: add VMDQ support in multi-queue configure Shaopeng He
2015-10-10 3:22 ` [dpdk-dev] [PATCH v2 4/4] doc: update release note for fm10k VMDQ support Shaopeng He
2015-10-27 9:21 ` [dpdk-dev] [PATCH v3 0/4] fm10k: add " Shaopeng He
2015-10-27 9:21 ` [dpdk-dev] [PATCH v3 1/4] fm10k: add multi-queue checking Shaopeng He
2015-10-27 9:21 ` [dpdk-dev] [PATCH v3 2/4] fm10k: add VMDQ support in MAC/VLAN filter Shaopeng He
2015-10-30 16:17 ` Thomas Monjalon
2015-10-31 2:22 ` He, Shaopeng
2015-10-27 9:21 ` [dpdk-dev] [PATCH v3 3/4] fm10k: add VMDQ support in multi-queue configure Shaopeng He
2015-10-27 9:21 ` [dpdk-dev] [PATCH v3 4/4] doc: update release note for fm10k VMDQ support Shaopeng He
2015-10-30 4:42 ` [dpdk-dev] [PATCH v3 0/4] fm10k: add " Wu, Jingjing
2015-10-30 14:07 ` Qiu, Michael
2015-10-31 2:44 ` [dpdk-dev] [PATCH v4 " Shaopeng He
2015-10-31 2:44 ` [dpdk-dev] [PATCH v4 1/4] fm10k: add multi-queue checking Shaopeng He
2015-10-31 2:44 ` [dpdk-dev] [PATCH v4 2/4] fm10k: add VMDQ support in MAC/VLAN filter Shaopeng He
2015-10-31 2:44 ` [dpdk-dev] [PATCH v4 3/4] fm10k: add VMDQ support in multi-queue configure Shaopeng He
2015-10-31 2:44 ` [dpdk-dev] [PATCH v4 4/4] doc: update release note for fm10k VMDQ support Shaopeng He
2015-11-01 15:15 ` [dpdk-dev] [PATCH v4 0/4] fm10k: add " Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533710CFB86FA344BFBF2D6802E6028621B501A8@SHSMSX101.ccr.corp.intel.com \
--to=michael.qiu@intel.com \
--cc=dev@dpdk.org \
--cc=shaopeng.he@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).