From: "Qiu, Michael" <michael.qiu@intel.com>
To: Tetsuya Mukawa <mukawa@igel.co.jp>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] FW: [PATCH v4 01/11] eal/pci, ethdev: Remove assumption that port will not be detached
Date: Mon, 19 Jan 2015 14:24:58 +0000 [thread overview]
Message-ID: <533710CFB86FA344BFBF2D6802E60286CB76AF@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <8CEF83825BEC744B83065625E567D7C2049D7C19@IRSMSX108.ger.corp.intel.com>
Hi, Tetsuya
You see lots of places have below three lines:
if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
return -EINVAL;
}
They are all the same(only few has the print log different), so can we improve it?
See below:
+static int
+rte_eth_dev_validate_port(uint8_t port_id, bool trace) {
+ if (port_id >= RTE_MAX_ETHPORTS ||
+ rte_eth_devices[port_id].attached != DEV_CONNECTED) {
+ if (trace)
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return DEV_INVALID;
+ }
+ else
+ return DEV_VALID;
+}
For normal case we just call this function use
rte_eth_dev_validate_port(port_id, 1)
here 1 could be a enmu value(Thus trace should be defined as int).
After call, we didn't need to add PMD_DEBUG_TRACE() any more.
For few cases like:
PMD_DEBUG_TRACE("set VF rate limit:invalid port id=%d\n",
port_id);
We can call the function with secondary param set to "0", and add the trace log after the function called, just as before.
I think after this enhancement, the code seems more clean and efficiency。
Thanks,
Michael
>> -----Original Message-----
>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Tetsuya Mukawa
>> Sent: Monday, January 19, 2015 10:40 AM
>> To: dev@dpdk.org
>> Subject: [dpdk-dev] [PATCH v4 01/11] eal/pci, ethdev: Remove assumption that port will not be
>> detached
>>
>> To remove assumption, do like followings.
>>
>> This patch adds "RTE_PCI_DRV_DETACHABLE" to drv_flags of rte_pci_driver structure. The flags
>> indicates the driver can detach devices at runtime.
>> Also remove assumption that port will not be detached.
>>
>> To remove the assumption.
>> - Add 'attached' member to rte_eth_dev structure.
>> This member is used for indicating the port is attached, or not.
>> - Add rte_eth_dev_allocate_new_port().
>> This function is used for allocating new port.
>>
>> v4:
>> - Use braces with 'for' loop.
>> - Fix indent of 'if' statement.
>>
>> Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
>> ---
>> lib/librte_eal/common/include/rte_pci.h | 2 +
>> lib/librte_ether/rte_ethdev.c | 248 ++++++++++++++++++--------------
>> lib/librte_ether/rte_ethdev.h | 5 +
>> 3 files changed, 151 insertions(+), 104 deletions(-)
>>
>> diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
>> index 66ed793..dd1da28 100644
>> --- a/lib/librte_eal/common/include/rte_pci.h
>> +++ b/lib/librte_eal/common/include/rte_pci.h
>> @@ -199,6 +199,8 @@ struct rte_pci_driver { #define RTE_PCI_DRV_FORCE_UNBIND 0x0004
>> /** Device driver supports link state interrupt */
>> #define RTE_PCI_DRV_INTR_LSC 0x0008
>> +/** Device driver supports detaching capability */
>> +#define RTE_PCI_DRV_DETACHABLE 0x0010
>>
>> /**< Internal use only - Macro used by pci addr parsing functions **/
>> #define GET_PCIADDR_FIELD(in, fd, lim, dlm) \
>> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c index 077d430..46cabaf
>> 100644
>> --- a/lib/librte_ether/rte_ethdev.c
>> +++ b/lib/librte_ether/rte_ethdev.c
>> @@ -175,6 +175,16 @@ enum {
>> STAT_QMAP_RX
>> };
>>
>> +enum {
>> + DEV_INVALID = 0,
>> + DEV_VALID,
>> +};
>> +
>> +enum {
>> + DEV_DISCONNECTED = 0,
>> + DEV_CONNECTED
>> +};
>> +
>> static inline void
>> rte_eth_dev_data_alloc(void)
>> {
>> @@ -201,19 +211,34 @@ rte_eth_dev_allocated(const char *name) {
>> unsigned i;
>>
>> - for (i = 0; i < nb_ports; i++) {
>> - if (strcmp(rte_eth_devices[i].data->name, name) == 0)
>> + for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
>> + if ((rte_eth_devices[i].attached == DEV_CONNECTED) &&
>> + strcmp(rte_eth_devices[i].data->name, name) == 0)
>> return &rte_eth_devices[i];
>> }
>> return NULL;
>> }
>>
>> +static uint8_t
>> +rte_eth_dev_allocate_new_port(void)
>> +{
>> + unsigned i;
>> +
>> + for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
>> + if (rte_eth_devices[i].attached == DEV_DISCONNECTED)
>> + return i;
>> + }
>> + return RTE_MAX_ETHPORTS;
>> +}
>> +
>> struct rte_eth_dev *
>> rte_eth_dev_allocate(const char *name)
>> {
>> + uint8_t port_id;
>> struct rte_eth_dev *eth_dev;
>>
>> - if (nb_ports == RTE_MAX_ETHPORTS) {
>> + port_id = rte_eth_dev_allocate_new_port();
>> + if (port_id == RTE_MAX_ETHPORTS) {
>> PMD_DEBUG_TRACE("Reached maximum number of Ethernet ports\n");
>> return NULL;
>> }
>> @@ -226,10 +251,12 @@ rte_eth_dev_allocate(const char *name)
>> return NULL;
>> }
>>
>> - eth_dev = &rte_eth_devices[nb_ports];
>> - eth_dev->data = &rte_eth_dev_data[nb_ports];
>> + eth_dev = &rte_eth_devices[port_id];
>> + eth_dev->data = &rte_eth_dev_data[port_id];
>> snprintf(eth_dev->data->name, sizeof(eth_dev->data->name), "%s", name);
>> - eth_dev->data->port_id = nb_ports++;
>> + eth_dev->data->port_id = port_id;
>> + eth_dev->attached = DEV_CONNECTED;
>> + nb_ports++;
>> return eth_dev;
>> }
>>
>> @@ -283,6 +310,7 @@ rte_eth_dev_init(struct rte_pci_driver *pci_drv,
>> (unsigned) pci_dev->id.device_id);
>> if (rte_eal_process_type() == RTE_PROC_PRIMARY)
>> rte_free(eth_dev->data->dev_private);
>> + eth_dev->attached = DEV_DISCONNECTED;
>> nb_ports--;
>> return diag;
>> }
>> @@ -308,10 +336,22 @@ rte_eth_driver_register(struct eth_driver *eth_drv)
>> rte_eal_pci_register(ð_drv->pci_drv);
>> }
>>
>> +static int
>> +rte_eth_dev_validate_port(uint8_t port_id) {
>> + if (port_id >= RTE_MAX_ETHPORTS)
>> + return DEV_INVALID;
>> +
>> + if (rte_eth_devices[port_id].attached == DEV_CONNECTED)
>> + return DEV_VALID;
>> + else
>> + return DEV_INVALID;
>> +}
>> +
>> int
>> rte_eth_dev_socket_id(uint8_t port_id)
>> {
>> - if (port_id >= nb_ports)
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID)
>> return -1;
>> return rte_eth_devices[port_id].pci_dev->numa_node;
>> }
>> @@ -369,7 +409,7 @@ rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -EINVAL;
>> }
>> @@ -395,7 +435,7 @@ rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -EINVAL;
>> }
>> @@ -421,7 +461,7 @@ rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -EINVAL;
>> }
>> @@ -447,7 +487,7 @@ rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -EINVAL;
>> }
>> @@ -703,7 +743,7 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports || port_id >= RTE_MAX_ETHPORTS) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-EINVAL);
>> }
>> @@ -888,7 +928,7 @@ rte_eth_dev_start(uint8_t port_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%" PRIu8 "\n", port_id);
>> return (-EINVAL);
>> }
>> @@ -923,7 +963,7 @@ rte_eth_dev_stop(uint8_t port_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_RET();
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%" PRIu8 "\n", port_id);
>> return;
>> }
>> @@ -951,7 +991,7 @@ rte_eth_dev_set_link_up(uint8_t port_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -EINVAL;
>> }
>> @@ -970,7 +1010,7 @@ rte_eth_dev_set_link_down(uint8_t port_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -EINVAL;
>> }
>> @@ -989,7 +1029,7 @@ rte_eth_dev_close(uint8_t port_id)
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_RET();
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1017,7 +1057,7 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-EINVAL);
>> }
>> @@ -1090,7 +1130,7 @@ rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
>> * in a multi-process setup*/
>> PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
>>
>> - if (port_id >= RTE_MAX_ETHPORTS || port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-EINVAL);
>> }
>> @@ -1123,7 +1163,7 @@ rte_eth_promiscuous_enable(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1139,7 +1179,7 @@ rte_eth_promiscuous_disable(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1155,7 +1195,7 @@ rte_eth_promiscuous_get(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -1;
>> }
>> @@ -1169,7 +1209,7 @@ rte_eth_allmulticast_enable(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1185,7 +1225,7 @@ rte_eth_allmulticast_disable(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1201,7 +1241,7 @@ rte_eth_allmulticast_get(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -1;
>> }
>> @@ -1229,7 +1269,7 @@ rte_eth_link_get(uint8_t port_id, struct rte_eth_link *eth_link) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1249,7 +1289,7 @@ rte_eth_link_get_nowait(uint8_t port_id, struct rte_eth_link *eth_link) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1269,7 +1309,7 @@ rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1286,7 +1326,7 @@ rte_eth_stats_reset(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1307,7 +1347,7 @@ rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstats *xstats,
>> uint64_t val;
>> char *stats_ptr;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -1;
>> }
>> @@ -1376,7 +1416,7 @@ rte_eth_xstats_reset(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1398,7 +1438,7 @@ set_queue_stats_mapping(uint8_t port_id, uint16_t queue_id, uint8_t
>> stat_idx, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -1433,7 +1473,7 @@ rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info)
>> {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1453,7 +1493,7 @@ rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return;
>> }
>> @@ -1467,7 +1507,7 @@ rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1483,7 +1523,7 @@ rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu)
>> int ret;
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1503,7 +1543,7 @@ rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1528,7 +1568,7 @@ rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t
>> rx_queue_id, int o {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1550,7 +1590,7 @@ rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tpid) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1570,7 +1610,7 @@ rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask)
>> int mask = 0;
>> int cur, org = 0;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1615,7 +1655,7 @@ rte_eth_dev_get_vlan_offload(uint8_t port_id)
>> struct rte_eth_dev *dev;
>> int ret = 0;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1639,7 +1679,7 @@ rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1657,7 +1697,7 @@ rte_eth_dev_fdir_add_signature_filter(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1691,7 +1731,7 @@ rte_eth_dev_fdir_update_signature_filter(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1725,7 +1765,7 @@ rte_eth_dev_fdir_remove_signature_filter(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1756,7 +1796,7 @@ rte_eth_dev_fdir_get_infos(uint8_t port_id, struct rte_eth_fdir *fdir) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1781,7 +1821,7 @@ rte_eth_dev_fdir_add_perfect_filter(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1821,7 +1861,7 @@ rte_eth_dev_fdir_update_perfect_filter(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1859,7 +1899,7 @@ rte_eth_dev_fdir_remove_perfect_filter(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1895,7 +1935,7 @@ rte_eth_dev_fdir_set_masks(uint8_t port_id, struct rte_fdir_masks
>> *fdir_mask) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1915,7 +1955,7 @@ rte_eth_dev_flow_ctrl_get(uint8_t port_id, struct rte_eth_fc_conf
>> *fc_conf) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1931,7 +1971,7 @@ rte_eth_dev_flow_ctrl_set(uint8_t port_id, struct rte_eth_fc_conf
>> *fc_conf) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -1951,7 +1991,7 @@ rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id, struct
>> rte_eth_pfc_conf *pfc {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2030,7 +2070,7 @@ rte_eth_dev_rss_reta_update(uint8_t port_id,
>> struct rte_eth_dev *dev;
>> int ret;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -2081,7 +2121,7 @@ rte_eth_dev_rss_hash_update(uint8_t port_id, struct rte_eth_rss_conf
>> *rss_conf)
>> struct rte_eth_dev *dev;
>> uint16_t rss_hash_protos;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2103,7 +2143,7 @@ rte_eth_dev_rss_hash_conf_get(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2118,7 +2158,7 @@ rte_eth_dev_udp_tunnel_add(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -2144,7 +2184,7 @@ rte_eth_dev_udp_tunnel_delete(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -2169,7 +2209,7 @@ rte_eth_led_on(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2184,7 +2224,7 @@ rte_eth_led_off(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2224,7 +2264,7 @@ rte_eth_dev_mac_addr_add(uint8_t port_id, struct ether_addr *addr,
>> int index;
>> uint64_t pool_mask;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2275,7 +2315,7 @@ rte_eth_dev_mac_addr_remove(uint8_t port_id, struct ether_addr *addr)
>> struct rte_eth_dev *dev;
>> int index;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2309,7 +2349,7 @@ rte_eth_dev_set_vf_rxmode(uint8_t port_id, uint16_t vf,
>> struct rte_eth_dev *dev;
>> struct rte_eth_dev_info dev_info;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("set VF RX mode:Invalid port_id=%d\n",
>> port_id);
>> return (-ENODEV);
>> @@ -2364,7 +2404,7 @@ rte_eth_dev_uc_hash_table_set(uint8_t port_id, struct ether_addr *addr,
>> int ret;
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("unicast hash setting:Invalid port_id=%d\n",
>> port_id);
>> return (-ENODEV);
>> @@ -2417,7 +2457,7 @@ rte_eth_dev_uc_all_hash_table_set(uint8_t port_id, uint8_t on) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("unicast hash setting:Invalid port_id=%d\n",
>> port_id);
>> return (-ENODEV);
>> @@ -2436,7 +2476,7 @@ rte_eth_dev_set_vf_rx(uint8_t port_id,uint16_t vf, uint8_t on)
>> struct rte_eth_dev *dev;
>> struct rte_eth_dev_info dev_info;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2462,7 +2502,7 @@ rte_eth_dev_set_vf_tx(uint8_t port_id,uint16_t vf, uint8_t on)
>> struct rte_eth_dev *dev;
>> struct rte_eth_dev_info dev_info;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("set pool tx:Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2487,7 +2527,7 @@ rte_eth_dev_set_vf_vlan_filter(uint8_t port_id, uint16_t vlan_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("VF VLAN filter:invalid port id=%d\n",
>> port_id);
>> return (-ENODEV);
>> @@ -2518,7 +2558,7 @@ int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
>> struct rte_eth_dev_info dev_info;
>> struct rte_eth_link link;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("set queue rate limit:invalid port id=%d\n",
>> port_id);
>> return -ENODEV;
>> @@ -2555,7 +2595,7 @@ int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, uint16_t tx_rate,
>> if (q_msk == 0)
>> return 0;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("set VF rate limit:invalid port id=%d\n",
>> port_id);
>> return -ENODEV;
>> @@ -2589,7 +2629,7 @@ rte_eth_mirror_rule_set(uint8_t port_id, {
>> struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2630,7 +2670,7 @@ rte_eth_mirror_rule_reset(uint8_t port_id, uint8_t rule_id) {
>> struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2655,7 +2695,7 @@ rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return 0;
>> }
>> @@ -2675,7 +2715,7 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return 0;
>> }
>> @@ -2695,7 +2735,7 @@ rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return 0;
>> }
>> @@ -2709,7 +2749,7 @@ rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t
>> offset) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2730,7 +2770,7 @@ rte_eth_dev_callback_register(uint8_t port_id,
>>
>> if (!cb_fn)
>> return (-EINVAL);
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-EINVAL);
>> }
>> @@ -2770,7 +2810,7 @@ rte_eth_dev_callback_unregister(uint8_t port_id,
>>
>> if (!cb_fn)
>> return (-EINVAL);
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-EINVAL);
>> }
>> @@ -2830,7 +2870,7 @@ int rte_eth_dev_bypass_init(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2850,7 +2890,7 @@ rte_eth_dev_bypass_state_show(uint8_t port_id, uint32_t *state) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2869,7 +2909,7 @@ rte_eth_dev_bypass_state_set(uint8_t port_id, uint32_t *new_state) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2889,7 +2929,7 @@ rte_eth_dev_bypass_event_show(uint8_t port_id, uint32_t event, uint32_t
>> *state) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2909,7 +2949,7 @@ rte_eth_dev_bypass_event_store(uint8_t port_id, uint32_t event, uint32_t
>> state) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2929,7 +2969,7 @@ rte_eth_dev_wd_timeout_store(uint8_t port_id, uint32_t timeout) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2949,7 +2989,7 @@ rte_eth_dev_bypass_ver_show(uint8_t port_id, uint32_t *ver) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2969,7 +3009,7 @@ rte_eth_dev_bypass_wd_timeout_show(uint8_t port_id, uint32_t
>> *wd_timeout) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -2989,7 +3029,7 @@ rte_eth_dev_bypass_wd_reset(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return (-ENODEV);
>> }
>> @@ -3011,7 +3051,7 @@ rte_eth_dev_add_syn_filter(uint8_t port_id, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3026,7 +3066,7 @@ rte_eth_dev_remove_syn_filter(uint8_t port_id) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3045,7 +3085,7 @@ rte_eth_dev_get_syn_filter(uint8_t port_id,
>> if (filter == NULL || rx_queue == NULL)
>> return -EINVAL;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3061,7 +3101,7 @@ rte_eth_dev_add_ethertype_filter(uint8_t port_id, uint16_t index, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3082,7 +3122,7 @@ rte_eth_dev_remove_ethertype_filter(uint8_t port_id, uint16_t index) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3101,7 +3141,7 @@ rte_eth_dev_get_ethertype_filter(uint8_t port_id, uint16_t index,
>> if (filter == NULL || rx_queue == NULL)
>> return -EINVAL;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3118,7 +3158,7 @@ rte_eth_dev_add_2tuple_filter(uint8_t port_id, uint16_t index, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3140,7 +3180,7 @@ rte_eth_dev_remove_2tuple_filter(uint8_t port_id, uint16_t index) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3159,7 +3199,7 @@ rte_eth_dev_get_2tuple_filter(uint8_t port_id, uint16_t index,
>> if (filter == NULL || rx_queue == NULL)
>> return -EINVAL;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3175,7 +3215,7 @@ rte_eth_dev_add_5tuple_filter(uint8_t port_id, uint16_t index, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3198,7 +3238,7 @@ rte_eth_dev_remove_5tuple_filter(uint8_t port_id, uint16_t index) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3217,7 +3257,7 @@ rte_eth_dev_get_5tuple_filter(uint8_t port_id, uint16_t index,
>> if (filter == NULL || rx_queue == NULL)
>> return -EINVAL;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3234,7 +3274,7 @@ rte_eth_dev_add_flex_filter(uint8_t port_id, uint16_t index, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3249,7 +3289,7 @@ rte_eth_dev_remove_flex_filter(uint8_t port_id, uint16_t index) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3268,7 +3308,7 @@ rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
>> if (filter == NULL || rx_queue == NULL)
>> return -EINVAL;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3284,7 +3324,7 @@ rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type
>> filter_type) {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> @@ -3301,7 +3341,7 @@ rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type, {
>> struct rte_eth_dev *dev;
>>
>> - if (port_id >= nb_ports) {
>> + if (rte_eth_dev_validate_port(port_id) == DEV_INVALID) {
>> PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
>> return -ENODEV;
>> }
>> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index ce0528f..616a44a
>> 100644
>> --- a/lib/librte_ether/rte_ethdev.h
>> +++ b/lib/librte_ether/rte_ethdev.h
>> @@ -1565,6 +1565,7 @@ struct rte_eth_dev {
>> struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
>> struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
>> struct rte_eth_dev_cb_list callbacks; /**< User application callbacks */
>> + uint8_t attached; /**< Flag indicating the port is attached */
>> };
>>
>> struct rte_eth_dev_sriov {
>> @@ -1630,6 +1631,10 @@ extern struct rte_eth_dev rte_eth_devices[];
>> * initialized by the [matching] Ethernet driver during the PCI probing phase.
>> * All devices whose port identifier is in the range
>> * [0, rte_eth_dev_count() - 1] can be operated on by network applications.
>> + * immediately after invoking rte_eal_init().
>> + * If the application unplugs a port using hotplug function, The
>> + enabled port
>> + * numbers may be noncontiguous. In the case, the applications need to
>> + manage
>> + * enabled port by themselves.
>> *
>> * @return
>> * - The total number of usable Ethernet devices.
>> --
>> 1.9.1
>
next prev parent reply other threads:[~2015-01-19 14:25 UTC|newest]
Thread overview: 362+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1418106629-22227-2-git-send-email-mukawa@igel.co.j>
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 00/11] Port Hotplug Framework Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 01/11] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
[not found] ` <8CEF83825BEC744B83065625E567D7C2049D7C19@IRSMSX108.ger.corp.intel.com>
2015-01-19 14:24 ` Qiu, Michael [this message]
2015-01-20 2:02 ` [dpdk-dev] FW: " Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 02/11] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 03/11] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 04/11] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 05/11] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-01-21 2:40 ` Qiu, Michael
2015-01-21 9:02 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 06/11] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-01-20 9:23 ` Qiu, Michael
2015-01-21 0:17 ` Tetsuya Mukawa
2015-01-21 10:01 ` Tetsuya Mukawa
2015-01-22 8:12 ` Qiu, Michael
2015-01-22 10:15 ` Tetsuya Mukawa
2015-01-23 2:54 ` Qiu, Michael
2015-01-23 3:20 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 07/11] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-01-21 2:55 ` Qiu, Michael
2015-01-21 6:33 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 08/11] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 01/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 02/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 03/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 04/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 05/13] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 06/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 07/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 09/13] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 10/13] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 11/13] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 13/13] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5] testpmd: " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 01/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 02/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 03/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 01/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 01/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-16 16:14 ` Iremonger, Bernard
2015-02-17 0:12 ` Thomas Monjalon
2015-02-17 3:09 ` Qiu, Michael
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 01/14] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 02/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 03/14] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 04/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 05/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-23 11:01 ` Iremonger, Bernard
2015-02-23 11:32 ` Tetsuya Mukawa
2015-02-23 11:39 ` Iremonger, Bernard
2015-02-23 11:40 ` Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-23 13:29 ` Maxime Leroy
2015-02-24 4:48 ` Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11] testpmd: " Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 06/14] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 07/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 08/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 09/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 10/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 11/14] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 12/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 13/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-20 10:14 ` Maxime Leroy
2015-02-20 10:32 ` Tetsuya Mukawa
2015-02-20 15:20 ` Maxime Leroy
2015-02-21 3:49 ` Tetsuya Mukawa
2015-02-21 12:49 ` Maxime Leroy
2015-02-22 3:04 ` Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10] testpmd: " Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12] testpmd: " Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-24 13:25 ` Maxime Leroy
2015-02-24 14:29 ` Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13] testpmd: " Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-25 11:21 ` Thomas Monjalon
2015-02-25 12:32 ` Tetsuya Mukawa
2015-02-25 14:00 ` Thomas Monjalon
2015-02-25 14:56 ` Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 09/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 10/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 11/13] eal/pci: Add vdev driver initialization and uninitialization functions Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 12/13] ethdev: Add rte_eth_dev_attach/detach() functions Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-03-02 19:03 ` Butler, Siobhan A
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-25 23:27 ` Thomas Monjalon
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15] testpmd: " Tetsuya Mukawa
2015-02-25 23:27 ` Thomas Monjalon
2015-02-26 18:49 ` De Lara Guarch, Pablo
2015-02-27 6:14 ` Tetsuya Mukawa
2015-02-27 23:32 ` Thomas Monjalon
2015-03-03 15:54 ` De Lara Guarch, Pablo
2015-03-05 6:23 ` Tetsuya Mukawa
2015-02-25 23:26 ` [dpdk-dev] [PATCH v15 00/13] Port Hotplug Framework Thomas Monjalon
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14] testpmd: " Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 02/14] eal_pci: pci memory map work with driver type Tetsuya Mukawa
2015-02-16 16:15 ` Iremonger, Bernard
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 03/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-16 16:17 ` Iremonger, Bernard
2015-02-17 0:36 ` Thomas Monjalon
2015-02-17 6:14 ` Tetsuya Mukawa
2015-02-18 0:31 ` Thomas Monjalon
2015-02-18 1:54 ` Tetsuya Mukawa
2015-02-18 6:10 ` Tetsuya Mukawa
2015-02-18 9:27 ` Iremonger, Bernard
2015-02-18 9:57 ` Thomas Monjalon
2015-02-18 10:03 ` Bruce Richardson
2015-02-18 10:58 ` Tetsuya Mukawa
2015-02-18 12:23 ` Bruce Richardson
2015-02-18 12:38 ` Tetsuya Mukawa
2015-02-18 12:33 ` Iremonger, Bernard
2015-02-18 12:41 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 04/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-16 16:19 ` Iremonger, Bernard
2015-02-17 0:44 ` Thomas Monjalon
2015-02-17 6:14 ` Tetsuya Mukawa
2015-02-18 1:02 ` Thomas Monjalon
2015-02-18 1:55 ` Tetsuya Mukawa
2015-02-18 10:26 ` Iremonger, Bernard
2015-02-18 10:32 ` Thomas Monjalon
2015-02-18 11:39 ` Iremonger, Bernard
2015-02-18 12:20 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 05/14] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-16 16:20 ` Iremonger, Bernard
2015-02-17 0:46 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 06/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-16 16:22 ` Iremonger, Bernard
2015-02-17 0:56 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 07/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-16 12:41 ` Neil Horman
2015-02-17 5:54 ` Tetsuya Mukawa
2015-02-16 16:23 ` Iremonger, Bernard
2015-02-17 1:04 ` Thomas Monjalon
2015-02-17 8:50 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 08/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-16 12:45 ` Neil Horman
2015-02-17 5:53 ` Tetsuya Mukawa
2015-02-16 16:25 ` Iremonger, Bernard
2015-02-17 1:11 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-18 1:09 ` Thomas Monjalon
2015-02-18 9:37 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 09/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-16 16:26 ` Iremonger, Bernard
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 10/14] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-16 16:27 ` Iremonger, Bernard
2015-02-17 1:18 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 11/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-16 16:28 ` Iremonger, Bernard
2015-02-17 1:24 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 01/14] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 02/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-19 11:17 ` Thomas Monjalon
2015-02-19 13:29 ` Tetsuya Mukawa
2015-02-20 5:18 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 03/14] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 04/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 05/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 06/14] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 07/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-19 14:31 ` Iremonger, Bernard
2015-02-20 1:17 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 08/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-19 11:24 ` Thomas Monjalon
2015-02-19 13:29 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 09/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 10/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 11/14] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 12/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-19 14:51 ` Iremonger, Bernard
2015-02-20 1:18 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 13/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-19 12:10 ` Thomas Monjalon
2015-02-19 13:30 ` Tetsuya Mukawa
2015-02-19 13:37 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9] testpmd: " Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 12/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-16 16:30 ` Iremonger, Bernard
2015-02-17 1:48 ` Thomas Monjalon
2015-02-17 8:51 ` Tetsuya Mukawa
2015-02-17 9:23 ` Thomas Monjalon
2015-02-17 10:26 ` Tetsuya Mukawa
2015-02-18 1:17 ` Thomas Monjalon
2015-02-18 1:55 ` Tetsuya Mukawa
2015-02-17 16:15 ` Maxime Leroy
2015-02-18 1:54 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 13/14] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-16 16:30 ` Iremonger, Bernard
2015-02-17 1:25 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-16 16:32 ` Iremonger, Bernard
2015-02-16 5:13 ` [dpdk-dev] [PATCH v8 00/14] Port Hotplug Framework Qiu, Michael
2015-02-16 4:15 ` [dpdk-dev] [PATCH v8] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-16 16:36 ` Iremonger, Bernard
2015-02-16 4:15 ` [dpdk-dev] [PATCH v8] testpmd: " Tetsuya Mukawa
2015-02-16 16:35 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 02/14] eal_pci: pci memory map work with driver type Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 03/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-09 8:52 ` Qiu, Michael
2015-02-09 15:16 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 04/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-09 13:10 ` Qiu, Michael
2015-02-10 15:08 ` Iremonger, Bernard
2015-02-11 2:51 ` Tetsuya Mukawa
2015-02-11 3:27 ` Qiu, Michael
2015-02-11 4:53 ` Tetsuya Mukawa
2015-02-11 4:57 ` Tetsuya Mukawa
2015-02-11 6:29 ` Qiu, Michael
2015-02-11 8:14 ` Tetsuya Mukawa
2015-02-11 12:13 ` Qiu, Michael
2015-02-12 1:44 ` Tetsuya Mukawa
2015-02-12 13:55 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 05/14] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 06/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 07/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-09 15:34 ` Iremonger, Bernard
2015-02-10 1:30 ` Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 08/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-09 13:44 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 09/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 10/14] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 11/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-09 15:03 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 12/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 13/14] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7] testpmd: " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 04/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 05/13] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 06/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 07/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-03 2:37 ` Qiu, Michael
2015-02-03 4:07 ` Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 09/13] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 10/13] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-03 2:35 ` Qiu, Michael
2015-02-03 4:07 ` Tetsuya Mukawa
2015-02-03 5:05 ` Qiu, Michael
2015-02-03 8:00 ` Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 11/13] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-02 5:42 ` Qiu, Michael
2015-02-02 6:22 ` Qiu, Michael
2015-02-03 1:28 ` Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6 13/13] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6] testpmd: " Tetsuya Mukawa
[not found] ` <8CEF83825BEC744B83065625E567D7C2049DCAD2@IRSMSX108.ger.corp.intel.com>
2015-02-03 1:32 ` Tetsuya Mukawa
2015-02-03 10:03 ` Iremonger, Bernard
2015-02-03 10:31 ` Tetsuya Mukawa
[not found] ` <1688512.MY7Nexz1BF@xps13>
2015-02-03 1:34 ` Tetsuya Mukawa
2015-02-03 6:15 ` Qiu, Michael
2015-02-03 9:14 ` Qiu, Michael
2015-02-03 10:29 ` Tetsuya Mukawa
2015-02-04 1:44 ` Qiu, Michael
2015-02-05 1:37 ` Tetsuya Mukawa
2015-02-03 6:59 ` Qiu, Michael
2015-02-03 10:26 ` Tetsuya Mukawa
2015-02-03 13:03 ` [dpdk-dev] [PATCH v6 00/13] Port Hotplug Framework Iremonger, Bernard
2015-02-05 1:32 ` Tetsuya Mukawa
2015-02-03 18:35 ` Iremonger, Bernard
2015-02-05 1:34 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 09/11] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 10/11] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-01-21 3:49 ` Qiu, Michael
2015-01-21 6:34 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 11/11] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-01-19 13:15 ` [dpdk-dev] [PATCH v4 00/11] Port Hotplug Framework Qiu, Michael
2015-01-27 3:00 ` Qiu, Michael
2015-01-27 5:01 ` Tetsuya Mukawa
2015-01-27 5:50 ` Qiu, Michael
2015-01-27 7:24 ` Tetsuya Mukawa
2015-01-19 10:41 ` [dpdk-dev] [PATCH v4] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-01-19 10:42 ` [dpdk-dev] [PATCH v4] testpmd: " Tetsuya Mukawa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533710CFB86FA344BFBF2D6802E60286CB76AF@SHSMSX101.ccr.corp.intel.com \
--to=michael.qiu@intel.com \
--cc=dev@dpdk.org \
--cc=mukawa@igel.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).