From: "Qiu, Michael" <michael.qiu@intel.com>
To: Tetsuya Mukawa <mukawa@igel.co.jp>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v4 06/11] eal/linux/pci: Add functions for unmapping igb_uio resources
Date: Tue, 20 Jan 2015 09:23:05 +0000 [thread overview]
Message-ID: <533710CFB86FA344BFBF2D6802E60286CB7D11@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1421664027-17971-7-git-send-email-mukawa@igel.co.jp>
On 1/19/2015 6:42 PM, Tetsuya Mukawa wrote:
> The patch adds functions for unmapping igb_uio resources. The patch is only
> for Linux and igb_uio environment. VFIO and BSD are not supported.
>
> v4:
> - Add paramerter checking.
> - Add header file to determine if hotplug can be enabled.
>
> Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
> ---
> lib/librte_eal/common/Makefile | 1 +
> lib/librte_eal/common/include/rte_dev_hotplug.h | 44 +++++++++++++++++
> lib/librte_eal/linuxapp/eal/eal_pci.c | 38 +++++++++++++++
> lib/librte_eal/linuxapp/eal/eal_pci_init.h | 8 +++
> lib/librte_eal/linuxapp/eal/eal_pci_uio.c | 65 +++++++++++++++++++++++++
> 5 files changed, 156 insertions(+)
> create mode 100644 lib/librte_eal/common/include/rte_dev_hotplug.h
>
> diff --git a/lib/librte_eal/common/Makefile b/lib/librte_eal/common/Makefile
> index 52c1a5f..db7cc93 100644
> --- a/lib/librte_eal/common/Makefile
> +++ b/lib/librte_eal/common/Makefile
> @@ -41,6 +41,7 @@ INC += rte_eal_memconfig.h rte_malloc_heap.h
> INC += rte_hexdump.h rte_devargs.h rte_dev.h
> INC += rte_common_vect.h
> INC += rte_pci_dev_feature_defs.h rte_pci_dev_features.h
> +INC += rte_dev_hotplug.h
>
> ifeq ($(CONFIG_RTE_INSECURE_FUNCTION_WARNING),y)
> INC += rte_warnings.h
> diff --git a/lib/librte_eal/common/include/rte_dev_hotplug.h b/lib/librte_eal/common/include/rte_dev_hotplug.h
> new file mode 100644
> index 0000000..b333e0f
> --- /dev/null
> +++ b/lib/librte_eal/common/include/rte_dev_hotplug.h
> @@ -0,0 +1,44 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2015 IGEL Co.,LTd.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of IGEL Co.,Ltd. nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef _RTE_DEV_HOTPLUG_H_
> +#define _RTE_DEV_HOTPLUG_H_
> +
> +/*
> + * determine if hotplug can be enabled on the system
> + */
> +#if defined(RTE_LIBRTE_EAL_HOTPLUG) && defined(RTE_LIBRTE_EAL_LINUXAPP)
As you said, VFIO should not work with it, so does it need to add the
vfio check here?
Thanks,
Michael
> +#define ENABLE_HOTPLUG
> +#endif /* RTE_LIBRTE_EAL_HOTPLUG & RTE_LIBRTE_EAL_LINUXAPP */
> +
> +#endif /* _RTE_DEV_HOTPLUG_H_ */
> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
> index 3d2d93c..52c464c 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_pci.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
> @@ -137,6 +137,25 @@ pci_map_resource(void *requested_addr, int fd, off_t offset, size_t size)
> return mapaddr;
> }
>
> +#ifdef ENABLE_HOTPLUG
> +/* unmap a particular resource */
> +void
> +pci_unmap_resource(void *requested_addr, size_t size)
> +{
> + if (requested_addr == NULL)
> + return;
> +
> + /* Unmap the PCI memory resource of device */
> + if (munmap(requested_addr, size)) {
> + RTE_LOG(ERR, EAL, "%s(): cannot munmap(%p, 0x%lx): %s\n",
> + __func__, requested_addr, (unsigned long)size,
> + strerror(errno));
> + } else
> + RTE_LOG(DEBUG, EAL, " PCI memory mapped at %p\n",
> + requested_addr);
> +}
> +#endif /* ENABLE_HOTPLUG */
> +
> /* parse the "resource" sysfs file */
> #define IORESOURCE_MEM 0x00000200
>
> @@ -510,6 +529,25 @@ pci_map_device(struct rte_pci_device *dev)
> return 0;
> }
>
> +#ifdef ENABLE_HOTPLUG
> +static void
> +pci_unmap_device(struct rte_pci_device *dev)
> +{
> + if (dev == NULL)
> + return;
> +
> + /* try unmapping the NIC resources using VFIO if it exists */
> +#ifdef VFIO_PRESENT
> + if (pci_vfio_is_enabled()) {
> + RTE_LOG(ERR, EAL, "%s() doesn't support vfio yet.\n",
> + __func__);
> + return;
> + }
> +#endif
> + pci_uio_unmap_resource(dev);
> +}
> +#endif /* ENABLE_HOTPLUG */
> +
> /*
> * If vendor/device ID match, call the devinit() function of the
> * driver.
> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_init.h b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
> index 1070eb8..5152a0b 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_pci_init.h
> +++ b/lib/librte_eal/linuxapp/eal/eal_pci_init.h
> @@ -34,6 +34,7 @@
> #ifndef EAL_PCI_INIT_H_
> #define EAL_PCI_INIT_H_
>
> +#include <rte_dev_hotplug.h>
> #include "eal_vfio.h"
>
> struct pci_map {
> @@ -71,6 +72,13 @@ void *pci_map_resource(void *requested_addr, int fd, off_t offset,
> /* map IGB_UIO resource prototype */
> int pci_uio_map_resource(struct rte_pci_device *dev);
>
> +#ifdef ENABLE_HOTPLUG
> +void pci_unmap_resource(void *requested_addr, size_t size);
> +
> +/* unmap IGB_UIO resource prototype */
> +void pci_uio_unmap_resource(struct rte_pci_device *dev);
> +#endif /* ENABLE_HOTPLUG */
> +
> #ifdef VFIO_PRESENT
>
> #define VFIO_MAX_GROUPS 64
> diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
> index 1da3507..81830d1 100644
> --- a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
> +++ b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
> @@ -404,6 +404,71 @@ pci_uio_map_resource(struct rte_pci_device *dev)
> return 0;
> }
>
> +#ifdef ENABLE_HOTPLUG
> +static void
> +pci_uio_unmap(struct mapped_pci_resource *uio_res)
> +{
> + int i;
> +
> + if (uio_res == NULL)
> + return;
> +
> + for (i = 0; i != uio_res->nb_maps; i++)
> + pci_unmap_resource(uio_res->maps[i].addr,
> + (size_t)uio_res->maps[i].size);
> +}
> +
> +static struct mapped_pci_resource *
> +pci_uio_find_resource(struct rte_pci_device *dev)
> +{
> + struct mapped_pci_resource *uio_res;
> +
> + if (dev == NULL)
> + return NULL;
> +
> + TAILQ_FOREACH(uio_res, pci_res_list, next) {
> +
> + /* skip this element if it doesn't match our PCI address */
> + if (!eal_compare_pci_addr(&uio_res->pci_addr, &dev->addr))
> + return uio_res;
> + }
> + return NULL;
> +}
> +
> +/* unmap the PCI resource of a PCI device in virtual memory */
> +void
> +pci_uio_unmap_resource(struct rte_pci_device *dev)
> +{
> + struct mapped_pci_resource *uio_res;
> +
> + if (dev == NULL)
> + return;
> +
> + /* find an entry for the device */
> + uio_res = pci_uio_find_resource(dev);
> + if (uio_res == NULL)
> + return;
> +
> + /* secondary processes - just free maps */
> + if (rte_eal_process_type() != RTE_PROC_PRIMARY)
> + return pci_uio_unmap(uio_res);
> +
> + TAILQ_REMOVE(pci_res_list, uio_res, next);
> +
> + /* unmap all resources */
> + pci_uio_unmap(uio_res);
> +
> + /* free uio resource */
> + rte_free(uio_res);
> +
> + /* close fd if in primary process */
> + close(dev->intr_handle.fd);
> +
> + dev->intr_handle.fd = -1;
> + dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
> +}
> +#endif /* ENABLE_HOTPLUG */
> +
> /*
> * parse a sysfs file containing one integer value
> * different to the eal version, as it needs to work with 64-bit values
next prev parent reply other threads:[~2015-01-20 9:23 UTC|newest]
Thread overview: 362+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1418106629-22227-2-git-send-email-mukawa@igel.co.j>
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 00/11] Port Hotplug Framework Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 01/11] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
[not found] ` <8CEF83825BEC744B83065625E567D7C2049D7C19@IRSMSX108.ger.corp.intel.com>
2015-01-19 14:24 ` [dpdk-dev] FW: " Qiu, Michael
2015-01-20 2:02 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 02/11] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 03/11] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 04/11] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 05/11] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-01-21 2:40 ` Qiu, Michael
2015-01-21 9:02 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 06/11] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-01-20 9:23 ` Qiu, Michael [this message]
2015-01-21 0:17 ` Tetsuya Mukawa
2015-01-21 10:01 ` Tetsuya Mukawa
2015-01-22 8:12 ` Qiu, Michael
2015-01-22 10:15 ` Tetsuya Mukawa
2015-01-23 2:54 ` Qiu, Michael
2015-01-23 3:20 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 07/11] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-01-21 2:55 ` Qiu, Michael
2015-01-21 6:33 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 08/11] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 01/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 02/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 03/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 04/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 05/13] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 06/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 07/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 09/13] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 10/13] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 11/13] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5 13/13] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-01-30 5:42 ` [dpdk-dev] [PATCH v5] testpmd: " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 01/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 02/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 03/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 01/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 01/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-16 16:14 ` Iremonger, Bernard
2015-02-17 0:12 ` Thomas Monjalon
2015-02-17 3:09 ` Qiu, Michael
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 01/14] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 02/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 03/14] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 04/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 05/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-23 11:01 ` Iremonger, Bernard
2015-02-23 11:32 ` Tetsuya Mukawa
2015-02-23 11:39 ` Iremonger, Bernard
2015-02-23 11:40 ` Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-23 13:29 ` Maxime Leroy
2015-02-24 4:48 ` Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-23 5:09 ` [dpdk-dev] [PATCH v11] testpmd: " Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 06/14] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 07/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 08/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 09/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 10/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 11/14] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 12/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 13/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-20 10:14 ` Maxime Leroy
2015-02-20 10:32 ` Tetsuya Mukawa
2015-02-20 15:20 ` Maxime Leroy
2015-02-21 3:49 ` Tetsuya Mukawa
2015-02-21 12:49 ` Maxime Leroy
2015-02-22 3:04 ` Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-20 6:39 ` [dpdk-dev] [PATCH v10] testpmd: " Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-23 12:45 ` [dpdk-dev] [PATCH v12 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-23 12:46 ` [dpdk-dev] [PATCH v12] testpmd: " Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-24 13:25 ` Maxime Leroy
2015-02-24 14:29 ` Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-24 4:49 ` [dpdk-dev] [PATCH v13] testpmd: " Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 08/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 09/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 10/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 11/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-25 11:21 ` Thomas Monjalon
2015-02-25 12:32 ` Tetsuya Mukawa
2015-02-25 14:00 ` Thomas Monjalon
2015-02-25 14:56 ` Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 00/13] Port Hotplug Framework Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 01/13] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 02/13] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 03/13] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 04/13] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 05/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 06/13] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 07/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 09/13] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 10/13] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 11/13] eal/pci: Add vdev driver initialization and uninitialization functions Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 12/13] ethdev: Add rte_eth_dev_attach/detach() functions Tetsuya Mukawa
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-03-02 19:03 ` Butler, Siobhan A
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-25 23:27 ` Thomas Monjalon
2015-02-25 19:32 ` [dpdk-dev] [PATCH v15] testpmd: " Tetsuya Mukawa
2015-02-25 23:27 ` Thomas Monjalon
2015-02-26 18:49 ` De Lara Guarch, Pablo
2015-02-27 6:14 ` Tetsuya Mukawa
2015-02-27 23:32 ` Thomas Monjalon
2015-03-03 15:54 ` De Lara Guarch, Pablo
2015-03-05 6:23 ` Tetsuya Mukawa
2015-02-25 23:26 ` [dpdk-dev] [PATCH v15 00/13] Port Hotplug Framework Thomas Monjalon
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14 13/13] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-25 4:04 ` [dpdk-dev] [PATCH v14] testpmd: " Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 02/14] eal_pci: pci memory map work with driver type Tetsuya Mukawa
2015-02-16 16:15 ` Iremonger, Bernard
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 03/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-16 16:17 ` Iremonger, Bernard
2015-02-17 0:36 ` Thomas Monjalon
2015-02-17 6:14 ` Tetsuya Mukawa
2015-02-18 0:31 ` Thomas Monjalon
2015-02-18 1:54 ` Tetsuya Mukawa
2015-02-18 6:10 ` Tetsuya Mukawa
2015-02-18 9:27 ` Iremonger, Bernard
2015-02-18 9:57 ` Thomas Monjalon
2015-02-18 10:03 ` Bruce Richardson
2015-02-18 10:58 ` Tetsuya Mukawa
2015-02-18 12:23 ` Bruce Richardson
2015-02-18 12:38 ` Tetsuya Mukawa
2015-02-18 12:33 ` Iremonger, Bernard
2015-02-18 12:41 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 04/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-16 16:19 ` Iremonger, Bernard
2015-02-17 0:44 ` Thomas Monjalon
2015-02-17 6:14 ` Tetsuya Mukawa
2015-02-18 1:02 ` Thomas Monjalon
2015-02-18 1:55 ` Tetsuya Mukawa
2015-02-18 10:26 ` Iremonger, Bernard
2015-02-18 10:32 ` Thomas Monjalon
2015-02-18 11:39 ` Iremonger, Bernard
2015-02-18 12:20 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 05/14] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-16 16:20 ` Iremonger, Bernard
2015-02-17 0:46 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 06/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-16 16:22 ` Iremonger, Bernard
2015-02-17 0:56 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 07/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-16 12:41 ` Neil Horman
2015-02-17 5:54 ` Tetsuya Mukawa
2015-02-16 16:23 ` Iremonger, Bernard
2015-02-17 1:04 ` Thomas Monjalon
2015-02-17 8:50 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 08/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-16 12:45 ` Neil Horman
2015-02-17 5:53 ` Tetsuya Mukawa
2015-02-16 16:25 ` Iremonger, Bernard
2015-02-17 1:11 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-18 1:09 ` Thomas Monjalon
2015-02-18 9:37 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 09/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-16 16:26 ` Iremonger, Bernard
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 10/14] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-16 16:27 ` Iremonger, Bernard
2015-02-17 1:18 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 11/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-16 16:28 ` Iremonger, Bernard
2015-02-17 1:24 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 00/14] Port Hotplug Framework Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 01/14] eal: Enable port Hotplug framework in Linux Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 02/14] eal_pci: Add flag to hold kernel driver type Tetsuya Mukawa
2015-02-19 11:17 ` Thomas Monjalon
2015-02-19 13:29 ` Tetsuya Mukawa
2015-02-20 5:18 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 03/14] eal_pci: pci memory map work with " Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 04/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 05/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 06/14] ethdev: Add rte_eth_dev_release_port to release specified port Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 07/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-19 14:31 ` Iremonger, Bernard
2015-02-20 1:17 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 08/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-19 11:24 ` Thomas Monjalon
2015-02-19 13:29 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 09/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 10/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 11/14] eal/pci: Add probe and close functions of pci driver Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 12/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-19 14:51 ` Iremonger, Bernard
2015-02-20 1:18 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 13/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-19 12:10 ` Thomas Monjalon
2015-02-19 13:30 ` Tetsuya Mukawa
2015-02-19 13:37 ` Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-19 2:49 ` [dpdk-dev] [PATCH v9] testpmd: " Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 12/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-16 16:30 ` Iremonger, Bernard
2015-02-17 1:48 ` Thomas Monjalon
2015-02-17 8:51 ` Tetsuya Mukawa
2015-02-17 9:23 ` Thomas Monjalon
2015-02-17 10:26 ` Tetsuya Mukawa
2015-02-18 1:17 ` Thomas Monjalon
2015-02-18 1:55 ` Tetsuya Mukawa
2015-02-17 16:15 ` Maxime Leroy
2015-02-18 1:54 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 13/14] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-16 16:30 ` Iremonger, Bernard
2015-02-17 1:25 ` Thomas Monjalon
2015-02-17 6:15 ` Tetsuya Mukawa
2015-02-16 4:14 ` [dpdk-dev] [PATCH v8 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-16 16:32 ` Iremonger, Bernard
2015-02-16 5:13 ` [dpdk-dev] [PATCH v8 00/14] Port Hotplug Framework Qiu, Michael
2015-02-16 4:15 ` [dpdk-dev] [PATCH v8] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-16 16:36 ` Iremonger, Bernard
2015-02-16 4:15 ` [dpdk-dev] [PATCH v8] testpmd: " Tetsuya Mukawa
2015-02-16 16:35 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 02/14] eal_pci: pci memory map work with driver type Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 03/14] eal/pci, ethdev: Remove assumption that port will not be detached Tetsuya Mukawa
2015-02-09 8:52 ` Qiu, Michael
2015-02-09 15:16 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 04/14] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-09 13:10 ` Qiu, Michael
2015-02-10 15:08 ` Iremonger, Bernard
2015-02-11 2:51 ` Tetsuya Mukawa
2015-02-11 3:27 ` Qiu, Michael
2015-02-11 4:53 ` Tetsuya Mukawa
2015-02-11 4:57 ` Tetsuya Mukawa
2015-02-11 6:29 ` Qiu, Michael
2015-02-11 8:14 ` Tetsuya Mukawa
2015-02-11 12:13 ` Qiu, Michael
2015-02-12 1:44 ` Tetsuya Mukawa
2015-02-12 13:55 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 05/14] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 06/14] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 07/14] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-09 15:34 ` Iremonger, Bernard
2015-02-10 1:30 ` Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 08/14] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-09 13:44 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 09/14] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 10/14] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 11/14] ethdev: Add one dev_type parameter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-09 15:03 ` Iremonger, Bernard
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 12/14] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 13/14] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7 14/14] doc: Add port hotplug framework section to programmers guide Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-09 8:30 ` [dpdk-dev] [PATCH v7] testpmd: " Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 04/13] eal/pci: Consolidate pci address comparison APIs Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 05/13] ethdev: Add rte_eth_dev_free to free specified device Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 06/13] eal, ethdev: Add a function and function pointers to close ether device Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 07/13] ethdev: Add functions that will be used by port hotplug functions Tetsuya Mukawa
2015-02-03 2:37 ` Qiu, Michael
2015-02-03 4:07 ` Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 08/13] eal/linux/pci: Add functions for unmapping igb_uio resources Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 09/13] eal/pci: Add a function to remove the entry of devargs list Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 10/13] eal/pci: Cleanup pci driver initialization code Tetsuya Mukawa
2015-02-03 2:35 ` Qiu, Michael
2015-02-03 4:07 ` Tetsuya Mukawa
2015-02-03 5:05 ` Qiu, Michael
2015-02-03 8:00 ` Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 11/13] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-02-01 4:01 ` [dpdk-dev] [PATCH v6 12/13] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-02-02 5:42 ` Qiu, Michael
2015-02-02 6:22 ` Qiu, Michael
2015-02-03 1:28 ` Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6 13/13] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-02-01 4:02 ` [dpdk-dev] [PATCH v6] testpmd: " Tetsuya Mukawa
[not found] ` <8CEF83825BEC744B83065625E567D7C2049DCAD2@IRSMSX108.ger.corp.intel.com>
2015-02-03 1:32 ` Tetsuya Mukawa
2015-02-03 10:03 ` Iremonger, Bernard
2015-02-03 10:31 ` Tetsuya Mukawa
[not found] ` <1688512.MY7Nexz1BF@xps13>
2015-02-03 1:34 ` Tetsuya Mukawa
2015-02-03 6:15 ` Qiu, Michael
2015-02-03 9:14 ` Qiu, Michael
2015-02-03 10:29 ` Tetsuya Mukawa
2015-02-04 1:44 ` Qiu, Michael
2015-02-05 1:37 ` Tetsuya Mukawa
2015-02-03 6:59 ` Qiu, Michael
2015-02-03 10:26 ` Tetsuya Mukawa
2015-02-03 13:03 ` [dpdk-dev] [PATCH v6 00/13] Port Hotplug Framework Iremonger, Bernard
2015-02-05 1:32 ` Tetsuya Mukawa
2015-02-03 18:35 ` Iremonger, Bernard
2015-02-05 1:34 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 09/11] ethdev: Add one dev_type paramerter to rte_eth_dev_allocate Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 10/11] eal/pci: Add rte_eal_dev_attach/detach() functions Tetsuya Mukawa
2015-01-21 3:49 ` Qiu, Michael
2015-01-21 6:34 ` Tetsuya Mukawa
2015-01-19 10:40 ` [dpdk-dev] [PATCH v4 11/11] eal: Enable port hotplug framework in Linux Tetsuya Mukawa
2015-01-19 13:15 ` [dpdk-dev] [PATCH v4 00/11] Port Hotplug Framework Qiu, Michael
2015-01-27 3:00 ` Qiu, Michael
2015-01-27 5:01 ` Tetsuya Mukawa
2015-01-27 5:50 ` Qiu, Michael
2015-01-27 7:24 ` Tetsuya Mukawa
2015-01-19 10:41 ` [dpdk-dev] [PATCH v4] librte_pmd_pcap: Add port hotplug support Tetsuya Mukawa
2015-01-19 10:42 ` [dpdk-dev] [PATCH v4] testpmd: " Tetsuya Mukawa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533710CFB86FA344BFBF2D6802E60286CB7D11@SHSMSX101.ccr.corp.intel.com \
--to=michael.qiu@intel.com \
--cc=dev@dpdk.org \
--cc=mukawa@igel.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).