Re: [dpdk-dev] DPDK Performance issue with l2fwd

[<Zachary.Jen@cas-well.com>]

Hi Bruce:

Thanks for your suggestion.
I have tried to use testpmd to test 16 ports today.
The result is so Interested. It can work, although some ports get low
performance (only get 80%).

Besides, I also do another test in l2fwd.
I tried to use 82580 * 16 ports in the same platform with l2fwd test.
The same situation happened again.
So, it seems a big bug hidden in the l2fwd.

Have someone get the similar case?

BTW, may this issue relate with DPDK version?


On 07/10/2014 11:53 PM, Richardson, Bruce wrote:
> Hi,
>
> Have you tried running a test with 16 ports using any other applications, for example testpmd?
>
> Regards,
> /Bruce
>
>> -----Original Message-----
>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zachary.Jen@cas-
>> well.com
>> Sent: Thursday, July 10, 2014 2:29 AM
>> To: dev@dpdk.org
>> Cc: Alan.Yu@cas-well.com
>> Subject: Re: [dpdk-dev] DPDK Performance issue with l2fwd
>>
>> Hi Alex:
>>
>> Thanks for your help.
>>
>> I forget to describe some criteria in my original post.
>>
>> At first, I has confirmed my 82599 has connected by PCIe Gen3 (Gen3 x8) speed.
>> The theoretical bandwidth can support over 160G in total.
>> Hence, It should get full speed in my test.
>>
>> Second, I have ever check the performance w/o DPDK in packet size 1518 in the
>> same environment, and indeed it can get 160G totally (by IRQ balance method).
>> So, I was so surprised to get this kinds of result in DPDK (I also use size 1518 to
>> test DPDK).
>>
>> BTW, I can get 120G throughput in 12 ports already. But when I add more than
>> 12 ports, I only can get 100G.
>> Why the performance gets less than 120G? Why only 10 ports works fine and NO
>> Tx and Rx in the others?
>> Is it bugs or limitations in DPDK?
>>
>> Has anyone every do the similar or the same test?
>>
>>
>> On 07/10/2014 04:40 PM, Alex Markuze wrote:
>> Hi Zachary,
>> Your issue may be with the PCI-e 3, with 16 lanes Each slot is limited to
>> 128Gb/s[3].
>> Now, AFAIK[1] the CPU is connected to the  I/O with a single PCI-E slot.
>>
>> Several thoughts that may help you:
>>
>> 1. You can figure out the max b/w by running netsurf over the kernel interfaces
>> (w/o DPDK). Each CPU can handle the Netperf and the Completion interrupts
>> with grace (packets of 64K and all offloads on) for 10Gb nics.
>> With more then 10 Nics I would disable the IRQ balancer and make sure
>> interrupts are spread evenly by setting the  IRQ affinity manually [2].
>> As long as you have a physical core(NO hyperthreading) per NIC port you can
>> figure out the MAX B/W you can get with all the nics.
>>
>> 2. You can try using (If available to you , obviously) 40Gb and 56Gb Nics
>> (Mellanox), In this case for each Netperf flow you will need to separate each
>> Netperf Stream and the interrupts to different Cores to Reach wire speed as
>> long as both cores are on the same NUMA node(lscpu).
>>
>> Hope this helps.
>>
>> [1]http://komposter.com.ua/documents/PCI_Express_Base_Specification_Revis
>> ion_3.0.pdf
>> [2]http://h50146.www5.hp.com/products/software/oe/linux/mainstream/supp
>> ort/whitepaper/pdfs/4AA4-9294ENW.pdf
>> [3]http://en.wikipedia.org/wiki/PCI_Express#PCI_Express_3.x
>>
>>
>> On Thu, Jul 10, 2014 at 11:07 AM, <Zachary.Jen@cas-
>> well.com<mailto:Zachary.Jen@cas-well.com>> wrote:
>> Hey Guys,
>>
>> Recently, I have used l2fwd to test 160G (82599 10G * 16 ports), but I
>> got a strange pheromone in my test.
>>
>> When I used 12 ports to test the performance of l2fwd, it can work fine
>> and achieve 120G.
>> But it got abnormal when I using over than 12 port. Part of ports seems
>> something wrong and no any Tx/Rx.
>> Has anyone know about this?
>>
>> My testing Environment.
>> 1. E5-2658 v2 (10 cores) * 2
>> http://ark.intel.com/zh-tw/products/76160/Intel-Xeon-Processor-E5-2658-v2-
>> 25M-Cache-2_40-GHz
>> 2. one core handle one port. (In order to get best performance.)
>> 3. No any QPI crossing  issue.
>> 4. l2fwd parameters
>>       4.1 -c 0xF0FF -- -P 0xF00FF  => 120G get!
>>       4.2 -c 0xFF0FF -- -P 0xFF0FF => Failed! Only first 10 ports can
>> work well.
>>       4.3 -c 0x3F3FF -- -P 0x3F3FF => Failed! Only first 10 ports can
>> work well.
>>
>> BTW, I have tried lots of parameter sets and if I set the ports number
>> over than 12 ports, it only first 10 ports got work.
>> Else, everything got well.
>>
>> Can anyone help me to solve the issue? Or DPDK only can set less equal
>> than 12 ports?
>> Or DPDK max throughput is 120G?
>>
>> 本信件可能包含瑞祺電通機密資訊，非指定之收件者，請勿使用或揭露本
>> 信件內容，並請銷毀此信件。 This email may contain confidential
>> information. Please do not use or disclose it in any way and delete it if you are
>> not the intended recipient.
>>
>>
>>
>> --
>> Best Regards,
>> Zachary Jen
>>
>> Software RD
>> CAS-WELL Inc.
>> 8th Floor, No. 242, Bo-Ai St., Shu-Lin City, Taipei County 238, Taiwan
>> Tel: +886-2-7705-8888#6305
>> Fax: +886-2-7731-9988
>>
>> 本信件可能包含瑞祺電通機密資訊，非指定之收件者，請勿使用或揭露本
>> 信件內容，並請銷毀此信件。 This email may contain confidential
>> information. Please do not use or disclose it in any way and delete it if you are
>> not the intended recipient.

--
Best Regards,
Zachary Jen

Software RD
CAS-WELL Inc.
8th Floor, No. 242, Bo-Ai St., Shu-Lin City, Taipei County 238, Taiwan
Tel: +886-2-7705-8888#6305
Fax: +886-2-7731-9988
本信件可能包含瑞祺電通機密資訊，非指定之收件者，請勿使用或揭露本信件內容，並請銷毀此信件。 This email may contain confidential information. Please do not use or disclose it in any way and delete it if you are not the intended recipient.