DPDK patches and discussions
 help / color / mirror / Atom feed
From: Olivier MATZ <olivier.matz@6wind.com>
To: Alex Markuze <alex@weka.io>, "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] UDP Checksum
Date: Thu, 06 Nov 2014 17:15:00 +0100
Message-ID: <545B9E84.2090701@6wind.com> (raw)
In-Reply-To: <CAKfHP0WWCrftSR=z=jvUsHCLtTZdBwch0ZvadiLa9nMfcbpW-Q@mail.gmail.com>


On 11/06/2014 05:05 PM, Alex Markuze wrote:
> I'm seeing "UDP: bad checksum." messages(dmesg) for packets sent by my dpdk
> app to a socket on a remote machine.
> Looking at the packets the scum value is set, its just not what wireshark
> expects.
> When sending I'm setting these fields in the egress packets.
>         pkt->pkt.vlan_macip.f.l2_len = sizeof(struct ether_hdr);
>         pkt->pkt.vlan_macip.f.l3_len = sizeof(struct ipv4_hdr);
>         pkt->ol_flags |= (PKT_TX_IP_CKSUM | PKT_TX_L4_MASK);

I think you need to do:

 pkt->pkt.vlan_macip.f.l2_len = sizeof(struct ether_hdr);
 pkt->pkt.vlan_macip.f.l3_len = sizeof(struct ipv4_hdr);
 pkt->ol_flags |= (PKT_TX_IP_CKSUM | PKT_TX_UDP_CKSUM);
 ipv4_hdr->hdr_checksum = 0;
 udp_hdr->dgram_cksum = 0;
 udp_hdr->dgram_cksum = get_ipv4_psd_sum(ipv4_hdr); /* see csumonly.c */


  reply	other threads:[~2014-11-06 16:05 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-06 16:05 Alex Markuze
2014-11-06 16:15 ` Olivier MATZ [this message]
2014-11-06 16:15 ` Ananyev, Konstantin
2014-11-06 16:26   ` Alex Markuze
     [not found]     ` <2601191342CEEE43887BDE71AB977258213A2EC5@IRSMSX105.ger.corp.intel.com>
2014-11-06 17:07       ` Ananyev, Konstantin
2019-09-24 15:11 [dpdk-dev] udp checksum Khoussi, Siham (IntlAssoc)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=545B9E84.2090701@6wind.com \
    --to=olivier.matz@6wind.com \
    --cc=alex@weka.io \
    --cc=dev@dpdk.org \


* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git