DPDK patches and discussions
 help / color / mirror / Atom feed
From: Vlad Zolotarov <vladz@cloudius-systems.com>
To: "dev@dpdk.org" <dev@dpdk.org>,
	 "Ouyang, Changchun" <changchun.ouyang@intel.com>
Subject: Re: [dpdk-dev] [PATCH 5/6] ixgbe: Config VF RSS
Date: Thu, 18 Dec 2014 12:08:51 +0200	[thread overview]
Message-ID: <5492A7B3.3000806@cloudius-systems.com> (raw)
In-Reply-To: <1418896722-19236-1-git-send-email-vladz@cloudius-systems.com>


On 12/18/14 11:58, Vlad Zolotarov wrote:
> From: Changchun Ouyang <changchun.ouyang@intel.com>
>
> It needs config RSS and IXGBE_MRQC and IXGBE_VFPSRTYPE to enable VF RSS.
>
> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
> ---
>   lib/librte_pmd_ixgbe/ixgbe_pf.c   | 15 +++++++++
>   lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 66 +++++++++++++++++++++++++++++++++------
>   2 files changed, 71 insertions(+), 10 deletions(-)
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_pf.c b/lib/librte_pmd_ixgbe/ixgbe_pf.c
> index cbb0145..9c9dad8 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_pf.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_pf.c
> @@ -187,6 +187,21 @@ int ixgbe_pf_host_configure(struct rte_eth_dev *eth_dev)
>   	IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(hw->mac.num_rar_entries), 0);
>   	IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(hw->mac.num_rar_entries), 0);
>
> +	/*
> +	 * VF RSS can support at most 4 queues for each VF, even if
> +	 * 8 queues are available for each VF, it need refine to 4
> +	 * queues here due to this limitation, otherwise no queue
> +	 * will receive any packet even RSS is enabled.
> +	 */
> +	if (eth_dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_RSS) {
> +		if (RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool == 8) {
> +			RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_32_POOLS;
> +			RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = 4;
> +			RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx =
> +				dev_num_vf(eth_dev) * 4;
> +		}
> +	}
> +
>   	/* set VMDq map to default PF pool */
>   	hw->mac.ops.set_vmdq(hw, 0, RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx);
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> index f58f98e..5d071b4 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> @@ -3327,6 +3327,39 @@ ixgbe_alloc_rx_queue_mbufs(struct igb_rx_queue *rxq)
>   }
>
>   static int
> +ixgbe_config_vf_rss(struct rte_eth_dev *dev)
> +{
> +	struct ixgbe_hw *hw;
> +	uint32_t mrqc;
> +
> +	ixgbe_rss_configure(dev);
> +
> +	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +
> +	/* MRQC: enable VF RSS */
> +	mrqc = IXGBE_READ_REG(hw, IXGBE_MRQC);
> +	mrqc &= ~IXGBE_MRQC_MRQE_MASK;
> +	switch (RTE_ETH_DEV_SRIOV(dev).active) {
> +	case ETH_64_POOLS:
> +		mrqc |= IXGBE_MRQC_VMDQRSS64EN;
> +		break;
> +
> +	case ETH_32_POOLS:
> +	case ETH_16_POOLS:
> +		mrqc |= IXGBE_MRQC_VMDQRSS32EN;
> +		break;
> +
> +	default:
> +		PMD_INIT_LOG(ERR, "Invalid pool number in IOV mode");
> +		return -EINVAL;
> +	}
> +
> +	IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
> +
> +	return 0;
> +}
> +
> +static int
>   ixgbe_dev_mq_rx_configure(struct rte_eth_dev *dev)
>   {
>   	struct ixgbe_hw *hw =
> @@ -3358,24 +3391,34 @@ ixgbe_dev_mq_rx_configure(struct rte_eth_dev *dev)
>   			default: ixgbe_rss_disable(dev);
>   		}
>   	} else {
> -		switch (RTE_ETH_DEV_SRIOV(dev).active) {
>   		/*
>   		 * SRIOV active scheme
>   		 * FIXME if support DCB/RSS together with VMDq & SRIOV
>   		 */
> -		case ETH_64_POOLS:
> -			IXGBE_WRITE_REG(hw, IXGBE_MRQC, IXGBE_MRQC_VMDQEN);
> +		switch (dev->data->dev_conf.rxmode.mq_mode) {
> +		case ETH_MQ_RX_RSS:
> +		case ETH_MQ_RX_VMDQ_RSS:
> +			ixgbe_config_vf_rss(dev);
>   			break;
>
> -		case ETH_32_POOLS:
> -			IXGBE_WRITE_REG(hw, IXGBE_MRQC, IXGBE_MRQC_VMDQRT4TCEN);
> -			break;
> +		default:
> +			switch (RTE_ETH_DEV_SRIOV(dev).active) {
> +			case ETH_64_POOLS:
> +				IXGBE_WRITE_REG(hw, IXGBE_MRQC, IXGBE_MRQC_VMDQEN);
> +				break;
>
> -		case ETH_16_POOLS:
> -			IXGBE_WRITE_REG(hw, IXGBE_MRQC, IXGBE_MRQC_VMDQRT8TCEN);
> +			case ETH_32_POOLS:
> +				IXGBE_WRITE_REG(hw, IXGBE_MRQC, IXGBE_MRQC_VMDQRT4TCEN);
> +				break;
> +
> +			case ETH_16_POOLS:
> +				IXGBE_WRITE_REG(hw, IXGBE_MRQC, IXGBE_MRQC_VMDQRT8TCEN);
> +				break;
> +			default:
> +				PMD_INIT_LOG(ERR, "invalid pool number in IOV mode");
> +				break;
> +			}
>   			break;
> -		default:
> -			PMD_INIT_LOG(ERR, "invalid pool number in IOV mode");
>   		}
>   	}
>
> @@ -4094,6 +4137,9 @@ ixgbevf_dev_rx_init(struct rte_eth_dev *dev)
>   			IXGBE_PSRTYPE_IPV6HDR;
>   #endif
>
> +	/* Set RQPL for VF RSS according to max Rx queue */
> +	psrtype |= (hw->mac.max_rx_queues >> 1) <<
> +			IXGBE_PSRTYPE_RQPL_SHIFT;

Don't u have to take a dev->data->nb_rx_queues into an account here as 
well? What if a user has requested less than maximum allowed number of 
Rx queues?

>   	IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, psrtype);
>
>   	if (dev->data->dev_conf.rxmode.enable_scatter) {
> --

       reply	other threads:[~2014-12-18 10:08 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1418896722-19236-1-git-send-email-vladz@cloudius-systems.com>
2014-12-18 10:08 ` Vlad Zolotarov [this message]
2014-12-19  1:13   ` Ouyang, Changchun
2014-12-15  2:56 [dpdk-dev] [PATCH 0/6] Enable VF RSS for Niantic Ouyang Changchun
2014-12-15  2:57 ` [dpdk-dev] [PATCH 5/6] ixgbe: Config VF RSS Ouyang Changchun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5492A7B3.3000806@cloudius-systems.com \
    --to=vladz@cloudius-systems.com \
    --cc=changchun.ouyang@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).