DPDK patches and discussions
 help / color / mirror / Atom feed
From: Vlad Zolotarov <vladz@cloudius-systems.com>
To: "Jastrzebski, MichalX K" <michalx.k.jastrzebski@intel.com>,
	 "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe
Date: Tue, 13 Jan 2015 12:02:08 +0200	[thread overview]
Message-ID: <54B4ED20.4010905@cloudius-systems.com> (raw)
In-Reply-To: <60ABE07DBB3A454EB7FAD707B4BB1582138D2553@IRSMSX109.ger.corp.intel.com>


On 01/12/15 17:46, Jastrzebski, MichalX K wrote:
>> -----Original Message-----
>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Michal Jastrzebski
>> Sent: Monday, January 12, 2015 3:43 PM
>> To: dev@dpdk.org
>> Subject: [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe
>>
>> Date: Mon, 12 Jan 2015 15:39:40 +0100
>> Message-Id: <1421073581-6644-2-git-send-email-
>> michalx.k.jastrzebski@intel.com>
>> X-Mailer: git-send-email 2.1.1
>> In-Reply-To: <1421073581-6644-1-git-send-email-
>> michalx.k.jastrzebski@intel.com>
>> References: <1421073581-6644-1-git-send-email-
>> michalx.k.jastrzebski@intel.com>
>>
>> From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
>>
>>
>> This patch add support for DCB in SRIOV mode. When no PFC
>>
>> is enabled this feature might be used as multiple queues
>>
>> (up to 8 or 4) for VF.
>>
>>
>>
>> It incorporate following modifications:
>>
>>   - Allow zero rx/tx queues to be passed to rte_eth_dev_configure().
>>
>>     Rationale:
>>
>>     in SRIOV mode PF use first free VF to RX/TX. If VF count
>>
>>     is 16 or 32 all recources are assigned to VFs so PF can
>>
>>     be used only for configuration.
>>
>>   - split nb_q_per_pool to nb_rx_q_per_pool and nb_tx_q_per_pool
>>
>>     Rationale:
>>
>>     rx and tx number of queue might be different if RX and TX are
>>
>>     configured in different mode. This allow to inform VF about
>>
>>     proper number of queues.
>>
>>   - extern mailbox API for DCB mode
>>
>>
>>
>> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
>>
>> ---
>>
>>   lib/librte_ether/rte_ethdev.c       |   84 +++++++++++++++++++++---------
>>
>>   lib/librte_ether/rte_ethdev.h       |    5 +-
>>
>>   lib/librte_pmd_e1000/igb_pf.c       |    3 +-
>>
>>   lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   10 ++--
>>
>>   lib/librte_pmd_ixgbe/ixgbe_ethdev.h |    1 +
>>
>>   lib/librte_pmd_ixgbe/ixgbe_pf.c     |   98 ++++++++++++++++++++++++++++++--
>> ---
>>
>>   lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |    7 ++-
>>
>>   7 files changed, 159 insertions(+), 49 deletions(-)
>>
>>
>>
>> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
>>
>> index 95f2ceb..4c1a494 100644
>>
>> --- a/lib/librte_ether/rte_ethdev.c
>>
>> +++ b/lib/librte_ether/rte_ethdev.c
>>
>> @@ -333,7 +333,7 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev
>> *dev, uint16_t nb_queues)
>>
>>   		dev->data->rx_queues = rte_zmalloc("ethdev->rx_queues",
>>
>>   				sizeof(dev->data->rx_queues[0]) * nb_queues,
>>
>>   				RTE_CACHE_LINE_SIZE);
>>
>> -		if (dev->data->rx_queues == NULL) {
>>
>> +		if (dev->data->rx_queues == NULL && nb_queues > 0) {
>>
>>   			dev->data->nb_rx_queues = 0;
>>
>>   			return -(ENOMEM);
>>
>>   		}
>>
>> @@ -475,7 +475,7 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev
>> *dev, uint16_t nb_queues)
>>
>>   		dev->data->tx_queues = rte_zmalloc("ethdev->tx_queues",
>>
>>   				sizeof(dev->data->tx_queues[0]) * nb_queues,
>>
>>   				RTE_CACHE_LINE_SIZE);
>>
>> -		if (dev->data->tx_queues == NULL) {
>>
>> +		if (dev->data->tx_queues == NULL && nb_queues > 0) {
>>
>>   			dev->data->nb_tx_queues = 0;
>>
>>   			return -(ENOMEM);
>>
>>   		}
>>
>> @@ -507,6 +507,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>
>>   		      const struct rte_eth_conf *dev_conf)
>>
>>   {
>>
>>   	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
>>
>> +	struct rte_eth_dev_info dev_info;
>>
>>
>>
>>   	if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
>>
>>   		/* check multi-queue mode */
>>
>> @@ -524,11 +525,33 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>
>>   			return (-EINVAL);
>>
>>   		}
>>
>>
>>
>> +		if ((dev_conf->rxmode.mq_mode ==
>> ETH_MQ_RX_VMDQ_DCB) &&
>>
>> +			(dev_conf->txmode.mq_mode ==
>> ETH_MQ_TX_VMDQ_DCB)) {
>>
>> +			enum rte_eth_nb_pools rx_pools =
>>
>> +						dev_conf-
>>> rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
>> +			enum rte_eth_nb_pools tx_pools =
>>
>> +						dev_conf-
>>> tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
>> +
>>
>> +			if (rx_pools != tx_pools) {
>>
>> +				/* Only equal number of pools is supported
>> when
>>
>> +				 * DCB+VMDq in SRIOV */
>>
>> +				PMD_DEBUG_TRACE("ethdev port_id=%"
>> PRIu8
>>
>> +						" SRIOV active, DCB+VMDQ
>> mode, "
>>
>> +						"number of rx and tx pools is
>> not eqaul\n",
>>
>> +						port_id);
>>
>> +				return (-EINVAL);
>>
>> +			}
>>
>> +		}
>>
>> +
>>
>> +		uint16_t nb_rx_q_per_pool =
>> RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool;
>>
>> +		uint16_t nb_tx_q_per_pool =
>> RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
>>
>> +
>>
>>   		switch (dev_conf->rxmode.mq_mode) {
>>
>> -		case ETH_MQ_RX_VMDQ_RSS:
>>
>>   		case ETH_MQ_RX_VMDQ_DCB:
>>
>> +			break;
>>
>> +		case ETH_MQ_RX_VMDQ_RSS:
>>
>>   		case ETH_MQ_RX_VMDQ_DCB_RSS:
>>
>> -			/* DCB/RSS VMDQ in SRIOV mode, not implement yet
>> */
>>
>> +			/* RSS, DCB+RSS VMDQ in SRIOV mode, not
>> implement yet */
>>
>>   			PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
>>
>>   					" SRIOV active, "
>>
>>   					"unsupported VMDQ mq_mode rx
>> %u\n",
>>
>> @@ -537,37 +560,32 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>
>>   		default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE
>> */
>>
>>   			/* if nothing mq mode configure, use default scheme
>> */
>>
>>   			dev->data->dev_conf.rxmode.mq_mode =
>> ETH_MQ_RX_VMDQ_ONLY;
>>
>> -			if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
>>
>> -				RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool =
>> 1;
>>
>> +			if (nb_rx_q_per_pool > 1)
>>
>> +				nb_rx_q_per_pool = 1;
>>
>>   			break;
>>
>>   		}
>>
>>
>>
>>   		switch (dev_conf->txmode.mq_mode) {
>>
>> -		case ETH_MQ_TX_VMDQ_DCB:
>>
>> -			/* DCB VMDQ in SRIOV mode, not implement yet */
>>
>> -			PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
>>
>> -					" SRIOV active, "
>>
>> -					"unsupported VMDQ mq_mode tx
>> %u\n",
>>
>> -					port_id, dev_conf-
>>> txmode.mq_mode);
>> -			return (-EINVAL);
>>
>> +		case ETH_MQ_TX_VMDQ_DCB: /* DCB VMDQ in SRIOV
>> mode*/
>>
>> +			break;
>>
>>   		default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE
>> */
>>
>>   			/* if nothing mq mode configure, use default scheme
>> */
>>
>>   			dev->data->dev_conf.txmode.mq_mode =
>> ETH_MQ_TX_VMDQ_ONLY;
>>
>> -			if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
>>
>> -				RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool =
>> 1;
>>
>> +			if (nb_tx_q_per_pool > 1)
>>
>> +				nb_tx_q_per_pool = 1;
>>
>>   			break;
>>
>>   		}
>>
>>
>>
>>   		/* check valid queue number */
>>
>> -		if ((nb_rx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) ||
>>
>> -		    (nb_tx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)) {
>>
>> +		if (nb_rx_q > nb_rx_q_per_pool || nb_tx_q >
>> nb_tx_q_per_pool) {
>>
>>   			PMD_DEBUG_TRACE("ethdev port_id=%d SRIOV
>> active, "
>>
>> -				    "queue number must less equal to %d\n",
>>
>> -					port_id,
>> RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool);
>>
>> +				    "rx/tx queue number must less equal to
>> %d/%d\n",
>>
>> +					port_id,
>> RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool,
>>
>> +
>> 	RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool);
>>
>>   			return (-EINVAL);
>>
>>   		}
>>
>>   	} else {
>>
>> -		/* For vmdb+dcb mode check our configuration before we go
>> further */
>>
>> +		/* For vmdq+dcb mode check our configuration before we go
>> further */
>>
>>   		if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
>> {
>>
>>   			const struct rte_eth_vmdq_dcb_conf *conf;
>>
>>
>>
>> @@ -606,11 +624,20 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>
>>   			}
>>
>>   		}
>>
>>
>>
>> +		/* For DCB we need to obtain maximum number of queues
>> dinamically,
>>
>> +		 * as this depends on max VF exported in PF */
>>
>> +		if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
>>
>> +			(dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB))
>> {
>>
>> +
>>
>> +				FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
>>> dev_infos_get, -ENOTSUP);
>> +				(*dev->dev_ops->dev_infos_get)(dev,
>> &dev_info);
>>
>> +		}
>>
>> +
>>
>>   		/* For DCB mode check our configuration before we go further
>> */
>>
>>   		if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) {
>>
>>   			const struct rte_eth_dcb_rx_conf *conf;
>>
>>
>>
>> -			if (nb_rx_q != ETH_DCB_NUM_QUEUES) {
>>
>> +			if (nb_rx_q != dev_info.max_rx_queues) {
>>
>>   				PMD_DEBUG_TRACE("ethdev port_id=%d
>> DCB, nb_rx_q "
>>
>>   						"!= %d\n",
>>
>>   						port_id,
>> ETH_DCB_NUM_QUEUES);
>>
>> @@ -630,7 +657,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id,
>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>
>>   		if (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB) {
>>
>>   			const struct rte_eth_dcb_tx_conf *conf;
>>
>>
>>
>> -			if (nb_tx_q != ETH_DCB_NUM_QUEUES) {
>>
>> +			if (nb_tx_q != dev_info.max_tx_queues) {
>>
>>   				PMD_DEBUG_TRACE("ethdev port_id=%d
>> DCB, nb_tx_q "
>>
>>   						"!= %d\n",
>>
>>   						port_id,
>> ETH_DCB_NUM_QUEUES);
>>
>> @@ -690,7 +717,10 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t
>> nb_rx_q, uint16_t nb_tx_q,
>>
>>   	}
>>
>>   	if (nb_rx_q == 0) {
>>
>>   		PMD_DEBUG_TRACE("ethdev port_id=%d nb_rx_q == 0\n",
>> port_id);
>>
>> -		return (-EINVAL);
>>
>> +		/* In SRIOV there can be no free resource for PF. So permit use
>> only
>>
>> +		 * for configuration. */
>>
>> +		if (RTE_ETH_DEV_SRIOV(dev).active == 0)
>>
>> +			return (-EINVAL);
>>
>>   	}
>>
>>
>>
>>   	if (nb_tx_q > dev_info.max_tx_queues) {
>>
>> @@ -698,9 +728,13 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t
>> nb_rx_q, uint16_t nb_tx_q,
>>
>>   				port_id, nb_tx_q, dev_info.max_tx_queues);
>>
>>   		return (-EINVAL);
>>
>>   	}
>>
>> +
>>
>>   	if (nb_tx_q == 0) {
>>
>>   		PMD_DEBUG_TRACE("ethdev port_id=%d nb_tx_q == 0\n",
>> port_id);
>>
>> -		return (-EINVAL);
>>
>> +		/* In SRIOV there can be no free resource for PF. So permit use
>> only
>>
>> +		 * for configuration. */
>>
>> +		if (RTE_ETH_DEV_SRIOV(dev).active == 0)
>>
>> +			return (-EINVAL);
>>
>>   	}
>>
>>
>>
>>   	/* Copy the dev_conf parameter into the dev structure */
>>
>> @@ -750,7 +784,7 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t
>> nb_rx_q, uint16_t nb_tx_q,
>>
>>   							ETHER_MAX_LEN;
>>
>>   	}
>>
>>
>>
>> -	/* multipe queue mode checking */
>>
>> +	/* multiple queue mode checking */
>>
>>   	diag = rte_eth_dev_check_mq_mode(port_id, nb_rx_q, nb_tx_q,
>> dev_conf);
>>
>>   	if (diag != 0) {
>>
>>   		PMD_DEBUG_TRACE("port%d rte_eth_dev_check_mq_mode =
>> %d\n",
>>
>> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
>>
>> index ce0528f..04fda83 100644
>>
>> --- a/lib/librte_ether/rte_ethdev.h
>>
>> +++ b/lib/librte_ether/rte_ethdev.h
>>
>> @@ -299,7 +299,7 @@ enum rte_eth_rx_mq_mode {
>>
>>   enum rte_eth_tx_mq_mode {
>>
>>   	ETH_MQ_TX_NONE    = 0,  /**< It is in neither DCB nor VT mode. */
>>
>>   	ETH_MQ_TX_DCB,          /**< For TX side,only DCB is on. */
>>
>> -	ETH_MQ_TX_VMDQ_DCB,	/**< For TX side,both DCB and VT is
>> on. */
>>
>> +	ETH_MQ_TX_VMDQ_DCB,     /**< For TX side,both DCB and VT is on.
>> */
>>
>>   	ETH_MQ_TX_VMDQ_ONLY,    /**< Only VT on, no DCB */
>>
>>   };
>>
>>
>>
>> @@ -1569,7 +1569,8 @@ struct rte_eth_dev {
>>
>>
>>
>>   struct rte_eth_dev_sriov {
>>
>>   	uint8_t active;               /**< SRIOV is active with 16, 32 or 64 pools */
>>
>> -	uint8_t nb_q_per_pool;        /**< rx queue number per pool */
>>
>> +	uint8_t nb_rx_q_per_pool;        /**< rx queue number per pool */
>>
>> +	uint8_t nb_tx_q_per_pool;        /**< tx queue number per pool */
>>
>>   	uint16_t def_vmdq_idx;        /**< Default pool num used for PF */
>>
>>   	uint16_t def_pool_q_idx;      /**< Default pool queue start reg index */
>>
>>   };
>>
>> diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
>>
>> index bc3816a..9d2f858 100644
>>
>> --- a/lib/librte_pmd_e1000/igb_pf.c
>>
>> +++ b/lib/librte_pmd_e1000/igb_pf.c
>>
>> @@ -115,7 +115,8 @@ void igb_pf_host_init(struct rte_eth_dev *eth_dev)
>>
>>   		rte_panic("Cannot allocate memory for private VF data\n");
>>
>>
>>
>>   	RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_8_POOLS;
>>
>> -	RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
>>
>> +	RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
>>
>> +	RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
>>
>>   	RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
>>
>>   	RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num *
>> nb_queue);
>>
>>
>>
>> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
>> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
>>
>> index 3fc3738..347f03c 100644
>>
>> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
>>
>> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
>>
>> @@ -3555,14 +3555,14 @@ static int ixgbe_set_vf_rate_limit(struct
>> rte_eth_dev *dev, uint16_t vf,
>>
>>   	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
>>> dev_private);
>>   	struct ixgbe_vf_info *vfinfo =
>>
>>   		*(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
>>> dev_private));
>> -	uint8_t  nb_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
>>
>> +	uint8_t  nb_tx_q_per_pool =
>> RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
>>
>>   	uint32_t queue_stride =
>>
>>   		IXGBE_MAX_RX_QUEUE_NUM /
>> RTE_ETH_DEV_SRIOV(dev).active;
>>
>>   	uint32_t queue_idx = vf * queue_stride, idx = 0, vf_idx;
>>
>> -	uint32_t queue_end = queue_idx + nb_q_per_pool - 1;
>>
>> +	uint32_t tx_queue_end = queue_idx + nb_tx_q_per_pool - 1;
>>
>>   	uint16_t total_rate = 0;
>>
>>
>>
>> -	if (queue_end >= hw->mac.max_tx_queues)
>>
>> +	if (tx_queue_end >= hw->mac.max_tx_queues)
>>
>>   		return -EINVAL;
>>
>>
>>
>>   	if (vfinfo != NULL) {
>>
>> @@ -3577,7 +3577,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev
>> *dev, uint16_t vf,
>>
>>   		return -EINVAL;
>>
>>
>>
>>   	/* Store tx_rate for this vf. */
>>
>> -	for (idx = 0; idx < nb_q_per_pool; idx++) {
>>
>> +	for (idx = 0; idx < nb_tx_q_per_pool; idx++) {
>>
>>   		if (((uint64_t)0x1 << idx) & q_msk) {
>>
>>   			if (vfinfo[vf].tx_rate[idx] != tx_rate)
>>
>>   				vfinfo[vf].tx_rate[idx] = tx_rate;
>>
>> @@ -3595,7 +3595,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev
>> *dev, uint16_t vf,
>>
>>   	}
>>
>>
>>
>>   	/* Set RTTBCNRC of each queue/pool for vf X  */
>>
>> -	for (; queue_idx <= queue_end; queue_idx++) {
>>
>> +	for (; queue_idx <= tx_queue_end; queue_idx++) {
>>
>>   		if (0x1 & q_msk)
>>
>>   			ixgbe_set_queue_rate_limit(dev, queue_idx, tx_rate);
>>
>>   		q_msk = q_msk >> 1;
>>
>> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
>> b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
>>
>> index ca99170..ebf16e9 100644
>>
>> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
>>
>> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
>>
>> @@ -159,6 +159,7 @@ struct ixgbe_vf_info {
>>
>>   	uint16_t tx_rate[IXGBE_MAX_QUEUE_NUM_PER_VF];
>>
>>   	uint16_t vlan_count;
>>
>>   	uint8_t spoofchk_enabled;
>>
>> +	unsigned int vf_api;
>>
>>   };
>>
>>
>>
>>   /*
>>
>> diff --git a/lib/librte_pmd_ixgbe/ixgbe_pf.c b/lib/librte_pmd_ixgbe/ixgbe_pf.c
>>
>> index 51da1fd..4d30bcf 100644
>>
>> --- a/lib/librte_pmd_ixgbe/ixgbe_pf.c
>>
>> +++ b/lib/librte_pmd_ixgbe/ixgbe_pf.c
>>
>> @@ -127,7 +127,8 @@ void ixgbe_pf_host_init(struct rte_eth_dev *eth_dev)
>>
>>   		RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_16_POOLS;
>>
>>   	}
>>
>>
>>
>> -	RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
>>
>> +	RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
>>
>> +	RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
>>
>>   	RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
>>
>>   	RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num *
>> nb_queue);
>>
>>
>>
>> @@ -189,7 +190,7 @@ int ixgbe_pf_host_configure(struct rte_eth_dev
>> *eth_dev)
>>
>>   	hw->mac.ops.set_vmdq(hw, 0,
>> RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx);
>>
>>
>>
>>   	/*
>>
>> -	 * SW msut set GCR_EXT.VT_Mode the same as GPIE.VT_Mode
>>
>> +	 * SW must set GCR_EXT.VT_Mode the same as GPIE.VT_Mode
>>
>>   	 */
>>
>>   	gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
>>
>>   	gcr_ext &= ~IXGBE_GCR_EXT_VT_MODE_MASK;
>>
>> @@ -214,19 +215,19 @@ int ixgbe_pf_host_configure(struct rte_eth_dev
>> *eth_dev)
>>
>>   	}
>>
>>
>>
>>   	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
>>
>> -        IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
>>
>> +	IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
>>
>>
>>
>> -        /*
>>
>> +	/*
>>
>>   	 * enable vlan filtering and allow all vlan tags through
>>
>>   	 */
>>
>> -        vlanctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
>>
>> -        vlanctrl |= IXGBE_VLNCTRL_VFE ; /* enable vlan filters */
>>
>> -        IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlanctrl);
>>
>> +	vlanctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
>>
>> +	vlanctrl |= IXGBE_VLNCTRL_VFE ; /* enable vlan filters */
>>
>> +	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlanctrl);
>>
>>
>>
>> -        /* VFTA - enable all vlan filters */
>>
>> -        for (i = 0; i < IXGBE_MAX_VFTA; i++) {
>>
>> -                IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), 0xFFFFFFFF);
>>
>> -        }
>>
>> +	/* VFTA - enable all vlan filters */
>>
>> +	for (i = 0; i < IXGBE_MAX_VFTA; i++) {
>>
>> +		IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), 0xFFFFFFFF);
>>
>> +	}
>>
>>
>>
>>   	/* Enable MAC Anti-Spoofing */
>>
>>   	hw->mac.ops.set_mac_anti_spoofing(hw, FALSE, vf_num);
>>
>> @@ -369,6 +370,73 @@ ixgbe_vf_reset(struct rte_eth_dev *dev, uint16_t vf,
>> uint32_t *msgbuf)
>>
>>   }
>>
>>
>>
>>   static int
>>
>> +ixgbe_negotiate_vf_api(struct rte_eth_dev *dev, uint32_t vf, uint32_t
>> *msgbuf)
>>
>> +{
>>
>> +	struct ixgbe_vf_info *vfinfo =
>>
>> +		*(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
>>> dev_private));
>> +	int api = msgbuf[1];
>>
>> +
>>
>> +	switch (api) {
>>
>> +	case ixgbe_mbox_api_10:
>>
>> +	case ixgbe_mbox_api_11:
>>
>> +		vfinfo[vf].vf_api = api;
>>
>> +		return 0;
>>
>> +	default:
>>
>> +		break;
>>
>> +	}
>>
>> +
>>
>> +	RTE_LOG(DEBUG, PMD, "VF %d requested invalid api version %u\n", vf,
>> api);
>>
>> +	return -1;
>>
>> +}
>>
>> +
>>
>> +static int
>>
>> +ixgbe_get_vf_queues(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
>>
>> +{
>>
>> +	struct ixgbe_vf_info *vfinfo =
>>
>> +		*(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data-
>>> dev_private));
>> +	struct ixgbe_dcb_config *dcb_cfg =
>>
>> +			IXGBE_DEV_PRIVATE_TO_DCB_CFG(dev->data-
>>> dev_private);
>> +
>>
>> +	uint8_t num_tcs = dcb_cfg->num_tcs.pg_tcs;
>>
>> +
>>
>> +	/* verify the PF is supporting the correct APIs */
>>
>> +	switch (vfinfo[vf].vf_api) {
>>
>> +	case ixgbe_mbox_api_10:
>>
>> +	case ixgbe_mbox_api_11:
>>
>> +		break;
>>
>> +	default:
>>
>> +		return -1;
>>
>> +	}
>>
>> +
>>
>> +	if (RTE_ETH_DEV_SRIOV(dev).active) {
>>
>> +		if (dev->data->dev_conf.rxmode.mq_mode ==
>> ETH_MQ_RX_VMDQ_DCB)
>>
>> +			msgbuf[IXGBE_VF_TX_QUEUES] = num_tcs;
>>
>> +		else
>>
>> +			msgbuf[IXGBE_VF_TX_QUEUES] = 1;
>>
>> +
>>
>> +		if (dev->data->dev_conf.txmode.mq_mode ==
>> ETH_MQ_TX_VMDQ_DCB)
>>
>> +			msgbuf[IXGBE_VF_RX_QUEUES] = num_tcs;
>>
>> +		else
>>
>> +			msgbuf[IXGBE_VF_RX_QUEUES] = 1;
>>
>> +	}	else {
>>
>> +		/* only allow 1 Tx queue for bandwidth limiting */
>>
>> +		msgbuf[IXGBE_VF_TX_QUEUES] = 1;
>>
>> +		msgbuf[IXGBE_VF_RX_QUEUES] = 1;
>>
>> +	}
>>
>> +
>>
>> +	/* notify VF of need for VLAN tag stripping, and correct queue */
>>
>> +	if (num_tcs)
>>
>> +		msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
>>
>> +	else
>>
>> +		msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
>>
>> +
>>
>> +	/* notify VF of default queue */
>>
>> +	msgbuf[IXGBE_VF_DEF_QUEUE] = 0;
>>
>> +
>>
>> +	return 0;
>>
>> +}
>>
>> +
>>
>> +static int
>>
>>   ixgbe_vf_set_mac_addr(struct rte_eth_dev *dev, uint32_t vf, uint32_t
>> *msgbuf)
>>
>>   {
>>
>>   	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
>>> dev_private);
>> @@ -512,6 +580,12 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev,
>> uint16_t vf)
>>
>>   	case IXGBE_VF_SET_VLAN:
>>
>>   		retval = ixgbe_vf_set_vlan(dev, vf, msgbuf);
>>
>>   		break;
>>
>> +	case IXGBE_VF_API_NEGOTIATE:
>>
>> +		retval = ixgbe_negotiate_vf_api(dev, vf, msgbuf);
>>
>> +		break;
>>
>> +	case IXGBE_VF_GET_QUEUES:
>>
>> +		retval = ixgbe_get_vf_queues(dev, vf, msgbuf);
>>
>> +		break;
>>
>>   	default:
>>
>>   		PMD_DRV_LOG(DEBUG, "Unhandled Msg %8.8x",
>> (unsigned)msgbuf[0]);
>>
>>   		retval = IXGBE_ERR_MBX;
>>
>> @@ -526,7 +600,7 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev,
>> uint16_t vf)
>>
>>
>>
>>   	msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
>>
>>
>>
>> -	ixgbe_write_mbx(hw, msgbuf, 1, vf);
>>
>> +	ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
>>
>>
>>
>>   	return retval;
>>
>>   }
>>
>> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>> b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>>
>> index e10d6a2..49b44fe 100644
>>
>> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>>
>> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>>
>> @@ -3166,10 +3166,9 @@ void ixgbe_configure_dcb(struct rte_eth_dev *dev)
>>
>>
>>
>>   	/* check support mq_mode for DCB */
>>
>>   	if ((dev_conf->rxmode.mq_mode != ETH_MQ_RX_VMDQ_DCB) &&
>>
>> -	    (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB))
>>
>> -		return;
>>
>> -
>>
>> -	if (dev->data->nb_rx_queues != ETH_DCB_NUM_QUEUES)
>>
>> +	    (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB) &&
>>
>> +	    (dev_conf->txmode.mq_mode != ETH_MQ_TX_VMDQ_DCB) &&
>>
>> +	    (dev_conf->txmode.mq_mode != ETH_MQ_TX_DCB))
>>
>>   		return;
>>
>>
>>
>>   	/** Configure DCB hardware **/
>>
>> --
>>
>> 1.7.9.5
>>
>>
> Self nacked - because of wrong message format.

Yeah, there is something really wrong with this email formatting.... ;) 
Note that since u (i guess) haven't used 'git send-email' for this 
series - it doesn't look like a series (at least in my thunderbird).

  reply	other threads:[~2015-01-13 10:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-12 14:43 Michal Jastrzebski
2015-01-12 15:46 ` Jastrzebski, MichalX K
2015-01-13 10:02   ` Vlad Zolotarov [this message]
2015-01-13 10:08 ` Vlad Zolotarov
2015-01-14  0:51   ` Ouyang, Changchun
2015-01-14  9:46     ` Wodkowski, PawelX
2015-01-12 15:50 [dpdk-dev] [PATCH 0/2] Enable DCB in SRIOV mode for ixgbe driver Michal Jastrzebski
2015-01-12 15:50 ` [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe Michal Jastrzebski
2015-01-13 10:14   ` Vlad Zolotarov
2015-01-13 11:00     ` Wodkowski, PawelX
2015-01-14  1:00     ` Ouyang, Changchun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54B4ED20.4010905@cloudius-systems.com \
    --to=vladz@cloudius-systems.com \
    --cc=dev@dpdk.org \
    --cc=michalx.k.jastrzebski@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).