Re: [dpdk-dev] [PATCH 1/2] pmd: add DCB for VF for ixgbe

[Vlad Zolotarov <vladz@cloudius-systems.com>]

On 01/12/15 17:50, Michal Jastrzebski wrote:
> From: Pawel Wodkowski <pawelx.wodkowski@intel.com>
>
> This patch add support for DCB in SRIOV mode. When no PFC
> is enabled this feature might be used as multiple queues
> (up to 8 or 4) for VF.
>
> It incorporate following modifications:
>   - Allow zero rx/tx queues to be passed to rte_eth_dev_configure().
>     Rationale:
>     in SRIOV mode PF use first free VF to RX/TX. If VF count
>     is 16 or 32 all recources are assigned to VFs so PF can
>     be used only for configuration.
>   - split nb_q_per_pool to nb_rx_q_per_pool and nb_tx_q_per_pool
>     Rationale:
>     rx and tx number of queue might be different if RX and TX are
>     configured in different mode. This allow to inform VF about
>     proper number of queues.
>   - extern mailbox API for DCB mode

IMHO each bullet above is worth a separate patch. ;)
It would be much easier to review.

thanks,
vlad

>
> Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
> ---
>   lib/librte_ether/rte_ethdev.c       |   84 +++++++++++++++++++++---------
>   lib/librte_ether/rte_ethdev.h       |    5 +-
>   lib/librte_pmd_e1000/igb_pf.c       |    3 +-
>   lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   10 ++--
>   lib/librte_pmd_ixgbe/ixgbe_ethdev.h |    1 +
>   lib/librte_pmd_ixgbe/ixgbe_pf.c     |   98 ++++++++++++++++++++++++++++++-----
>   lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |    7 ++-
>   7 files changed, 159 insertions(+), 49 deletions(-)
>
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index 95f2ceb..4c1a494 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -333,7 +333,7 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
>   		dev->data->rx_queues = rte_zmalloc("ethdev->rx_queues",
>   				sizeof(dev->data->rx_queues[0]) * nb_queues,
>   				RTE_CACHE_LINE_SIZE);
> -		if (dev->data->rx_queues == NULL) {
> +		if (dev->data->rx_queues == NULL && nb_queues > 0) {
>   			dev->data->nb_rx_queues = 0;
>   			return -(ENOMEM);
>   		}
> @@ -475,7 +475,7 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
>   		dev->data->tx_queues = rte_zmalloc("ethdev->tx_queues",
>   				sizeof(dev->data->tx_queues[0]) * nb_queues,
>   				RTE_CACHE_LINE_SIZE);
> -		if (dev->data->tx_queues == NULL) {
> +		if (dev->data->tx_queues == NULL && nb_queues > 0) {
>   			dev->data->nb_tx_queues = 0;
>   			return -(ENOMEM);
>   		}
> @@ -507,6 +507,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   		      const struct rte_eth_conf *dev_conf)
>   {
>   	struct rte_eth_dev *dev = &rte_eth_devices[port_id];
> +	struct rte_eth_dev_info dev_info;
>   
>   	if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
>   		/* check multi-queue mode */
> @@ -524,11 +525,33 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   			return (-EINVAL);
>   		}
>   
> +		if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB) &&
> +			(dev_conf->txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)) {
> +			enum rte_eth_nb_pools rx_pools =
> +						dev_conf->rx_adv_conf.vmdq_dcb_conf.nb_queue_pools;
> +			enum rte_eth_nb_pools tx_pools =
> +						dev_conf->tx_adv_conf.vmdq_dcb_tx_conf.nb_queue_pools;
> +
> +			if (rx_pools != tx_pools) {
> +				/* Only equal number of pools is supported when
> +				 * DCB+VMDq in SRIOV */
> +				PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
> +						" SRIOV active, DCB+VMDQ mode, "
> +						"number of rx and tx pools is not eqaul\n",
> +						port_id);
> +				return (-EINVAL);
> +			}
> +		}
> +
> +		uint16_t nb_rx_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool;
> +		uint16_t nb_tx_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
> +
>   		switch (dev_conf->rxmode.mq_mode) {
> -		case ETH_MQ_RX_VMDQ_RSS:
>   		case ETH_MQ_RX_VMDQ_DCB:
> +			break;
> +		case ETH_MQ_RX_VMDQ_RSS:
>   		case ETH_MQ_RX_VMDQ_DCB_RSS:
> -			/* DCB/RSS VMDQ in SRIOV mode, not implement yet */
> +			/* RSS, DCB+RSS VMDQ in SRIOV mode, not implement yet */
>   			PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
>   					" SRIOV active, "
>   					"unsupported VMDQ mq_mode rx %u\n",
> @@ -537,37 +560,32 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   		default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE */
>   			/* if nothing mq mode configure, use default scheme */
>   			dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_ONLY;
> -			if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
> -				RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
> +			if (nb_rx_q_per_pool > 1)
> +				nb_rx_q_per_pool = 1;
>   			break;
>   		}
>   
>   		switch (dev_conf->txmode.mq_mode) {
> -		case ETH_MQ_TX_VMDQ_DCB:
> -			/* DCB VMDQ in SRIOV mode, not implement yet */
> -			PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
> -					" SRIOV active, "
> -					"unsupported VMDQ mq_mode tx %u\n",
> -					port_id, dev_conf->txmode.mq_mode);
> -			return (-EINVAL);
> +		case ETH_MQ_TX_VMDQ_DCB: /* DCB VMDQ in SRIOV mode*/
> +			break;
>   		default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */
>   			/* if nothing mq mode configure, use default scheme */
>   			dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_ONLY;
> -			if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
> -				RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
> +			if (nb_tx_q_per_pool > 1)
> +				nb_tx_q_per_pool = 1;
>   			break;
>   		}
>   
>   		/* check valid queue number */
> -		if ((nb_rx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) ||
> -		    (nb_tx_q > RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)) {
> +		if (nb_rx_q > nb_rx_q_per_pool || nb_tx_q > nb_tx_q_per_pool) {
>   			PMD_DEBUG_TRACE("ethdev port_id=%d SRIOV active, "
> -				    "queue number must less equal to %d\n",
> -					port_id, RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool);
> +				    "rx/tx queue number must less equal to %d/%d\n",
> +					port_id, RTE_ETH_DEV_SRIOV(dev).nb_rx_q_per_pool,
> +					RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool);
>   			return (-EINVAL);
>   		}
>   	} else {
> -		/* For vmdb+dcb mode check our configuration before we go further */
> +		/* For vmdq+dcb mode check our configuration before we go further */
>   		if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB) {
>   			const struct rte_eth_vmdq_dcb_conf *conf;
>   
> @@ -606,11 +624,20 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   			}
>   		}
>   
> +		/* For DCB we need to obtain maximum number of queues dinamically,
> +		 * as this depends on max VF exported in PF */
> +		if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
> +			(dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB)) {
> +
> +				FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
> +				(*dev->dev_ops->dev_infos_get)(dev, &dev_info);
> +		}
> +
>   		/* For DCB mode check our configuration before we go further */
>   		if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) {
>   			const struct rte_eth_dcb_rx_conf *conf;
>   
> -			if (nb_rx_q != ETH_DCB_NUM_QUEUES) {
> +			if (nb_rx_q != dev_info.max_rx_queues) {
>   				PMD_DEBUG_TRACE("ethdev port_id=%d DCB, nb_rx_q "
>   						"!= %d\n",
>   						port_id, ETH_DCB_NUM_QUEUES);
> @@ -630,7 +657,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   		if (dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB) {
>   			const struct rte_eth_dcb_tx_conf *conf;
>   
> -			if (nb_tx_q != ETH_DCB_NUM_QUEUES) {
> +			if (nb_tx_q != dev_info.max_tx_queues) {
>   				PMD_DEBUG_TRACE("ethdev port_id=%d DCB, nb_tx_q "
>   						"!= %d\n",
>   						port_id, ETH_DCB_NUM_QUEUES);
> @@ -690,7 +717,10 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   	}
>   	if (nb_rx_q == 0) {
>   		PMD_DEBUG_TRACE("ethdev port_id=%d nb_rx_q == 0\n", port_id);
> -		return (-EINVAL);
> +		/* In SRIOV there can be no free resource for PF. So permit use only
> +		 * for configuration. */
> +		if (RTE_ETH_DEV_SRIOV(dev).active == 0)
> +			return (-EINVAL);
>   	}
>   
>   	if (nb_tx_q > dev_info.max_tx_queues) {
> @@ -698,9 +728,13 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   				port_id, nb_tx_q, dev_info.max_tx_queues);
>   		return (-EINVAL);
>   	}
> +
>   	if (nb_tx_q == 0) {
>   		PMD_DEBUG_TRACE("ethdev port_id=%d nb_tx_q == 0\n", port_id);
> -		return (-EINVAL);
> +		/* In SRIOV there can be no free resource for PF. So permit use only
> +		 * for configuration. */
> +		if (RTE_ETH_DEV_SRIOV(dev).active == 0)
> +			return (-EINVAL);
>   	}
>   
>   	/* Copy the dev_conf parameter into the dev structure */
> @@ -750,7 +784,7 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   							ETHER_MAX_LEN;
>   	}
>   
> -	/* multipe queue mode checking */
> +	/* multiple queue mode checking */
>   	diag = rte_eth_dev_check_mq_mode(port_id, nb_rx_q, nb_tx_q, dev_conf);
>   	if (diag != 0) {
>   		PMD_DEBUG_TRACE("port%d rte_eth_dev_check_mq_mode = %d\n",
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> index ce0528f..04fda83 100644
> --- a/lib/librte_ether/rte_ethdev.h
> +++ b/lib/librte_ether/rte_ethdev.h
> @@ -299,7 +299,7 @@ enum rte_eth_rx_mq_mode {
>   enum rte_eth_tx_mq_mode {
>   	ETH_MQ_TX_NONE    = 0,  /**< It is in neither DCB nor VT mode. */
>   	ETH_MQ_TX_DCB,          /**< For TX side,only DCB is on. */
> -	ETH_MQ_TX_VMDQ_DCB,	/**< For TX side,both DCB and VT is on. */
> +	ETH_MQ_TX_VMDQ_DCB,     /**< For TX side,both DCB and VT is on. */
>   	ETH_MQ_TX_VMDQ_ONLY,    /**< Only VT on, no DCB */
>   };
>   
> @@ -1569,7 +1569,8 @@ struct rte_eth_dev {
>   
>   struct rte_eth_dev_sriov {
>   	uint8_t active;               /**< SRIOV is active with 16, 32 or 64 pools */
> -	uint8_t nb_q_per_pool;        /**< rx queue number per pool */
> +	uint8_t nb_rx_q_per_pool;        /**< rx queue number per pool */
> +	uint8_t nb_tx_q_per_pool;        /**< tx queue number per pool */
>   	uint16_t def_vmdq_idx;        /**< Default pool num used for PF */
>   	uint16_t def_pool_q_idx;      /**< Default pool queue start reg index */
>   };
> diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
> index bc3816a..9d2f858 100644
> --- a/lib/librte_pmd_e1000/igb_pf.c
> +++ b/lib/librte_pmd_e1000/igb_pf.c
> @@ -115,7 +115,8 @@ void igb_pf_host_init(struct rte_eth_dev *eth_dev)
>   		rte_panic("Cannot allocate memory for private VF data\n");
>   
>   	RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_8_POOLS;
> -	RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
> +	RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
> +	RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
>   	RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
>   	RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num * nb_queue);
>   
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> index 3fc3738..347f03c 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> @@ -3555,14 +3555,14 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev *dev, uint16_t vf,
>   	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>   	struct ixgbe_vf_info *vfinfo =
>   		*(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
> -	uint8_t  nb_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool;
> +	uint8_t  nb_tx_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_tx_q_per_pool;
>   	uint32_t queue_stride =
>   		IXGBE_MAX_RX_QUEUE_NUM / RTE_ETH_DEV_SRIOV(dev).active;
>   	uint32_t queue_idx = vf * queue_stride, idx = 0, vf_idx;
> -	uint32_t queue_end = queue_idx + nb_q_per_pool - 1;
> +	uint32_t tx_queue_end = queue_idx + nb_tx_q_per_pool - 1;
>   	uint16_t total_rate = 0;
>   
> -	if (queue_end >= hw->mac.max_tx_queues)
> +	if (tx_queue_end >= hw->mac.max_tx_queues)
>   		return -EINVAL;
>   
>   	if (vfinfo != NULL) {
> @@ -3577,7 +3577,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev *dev, uint16_t vf,
>   		return -EINVAL;
>   
>   	/* Store tx_rate for this vf. */
> -	for (idx = 0; idx < nb_q_per_pool; idx++) {
> +	for (idx = 0; idx < nb_tx_q_per_pool; idx++) {
>   		if (((uint64_t)0x1 << idx) & q_msk) {
>   			if (vfinfo[vf].tx_rate[idx] != tx_rate)
>   				vfinfo[vf].tx_rate[idx] = tx_rate;
> @@ -3595,7 +3595,7 @@ static int ixgbe_set_vf_rate_limit(struct rte_eth_dev *dev, uint16_t vf,
>   	}
>   
>   	/* Set RTTBCNRC of each queue/pool for vf X  */
> -	for (; queue_idx <= queue_end; queue_idx++) {
> +	for (; queue_idx <= tx_queue_end; queue_idx++) {
>   		if (0x1 & q_msk)
>   			ixgbe_set_queue_rate_limit(dev, queue_idx, tx_rate);
>   		q_msk = q_msk >> 1;
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> index ca99170..ebf16e9 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.h
> @@ -159,6 +159,7 @@ struct ixgbe_vf_info {
>   	uint16_t tx_rate[IXGBE_MAX_QUEUE_NUM_PER_VF];
>   	uint16_t vlan_count;
>   	uint8_t spoofchk_enabled;
> +	unsigned int vf_api;
>   };
>   
>   /*
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_pf.c b/lib/librte_pmd_ixgbe/ixgbe_pf.c
> index 51da1fd..4d30bcf 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_pf.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_pf.c
> @@ -127,7 +127,8 @@ void ixgbe_pf_host_init(struct rte_eth_dev *eth_dev)
>   		RTE_ETH_DEV_SRIOV(eth_dev).active = ETH_16_POOLS;
>   	}
>   
> -	RTE_ETH_DEV_SRIOV(eth_dev).nb_q_per_pool = nb_queue;
> +	RTE_ETH_DEV_SRIOV(eth_dev).nb_rx_q_per_pool = nb_queue;
> +	RTE_ETH_DEV_SRIOV(eth_dev).nb_tx_q_per_pool = nb_queue;
>   	RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx = vf_num;
>   	RTE_ETH_DEV_SRIOV(eth_dev).def_pool_q_idx = (uint16_t)(vf_num * nb_queue);
>   
> @@ -189,7 +190,7 @@ int ixgbe_pf_host_configure(struct rte_eth_dev *eth_dev)
>   	hw->mac.ops.set_vmdq(hw, 0, RTE_ETH_DEV_SRIOV(eth_dev).def_vmdq_idx);
>   
>   	/*
> -	 * SW msut set GCR_EXT.VT_Mode the same as GPIE.VT_Mode
> +	 * SW must set GCR_EXT.VT_Mode the same as GPIE.VT_Mode
>   	 */
>   	gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
>   	gcr_ext &= ~IXGBE_GCR_EXT_VT_MODE_MASK;
> @@ -214,19 +215,19 @@ int ixgbe_pf_host_configure(struct rte_eth_dev *eth_dev)
>   	}
>   
>   	IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
> -        IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
> +	IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
>   
> -        /*
> +	/*
>   	 * enable vlan filtering and allow all vlan tags through
>   	 */
> -        vlanctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
> -        vlanctrl |= IXGBE_VLNCTRL_VFE ; /* enable vlan filters */
> -        IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlanctrl);
> +	vlanctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
> +	vlanctrl |= IXGBE_VLNCTRL_VFE ; /* enable vlan filters */
> +	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlanctrl);
>   
> -        /* VFTA - enable all vlan filters */
> -        for (i = 0; i < IXGBE_MAX_VFTA; i++) {
> -                IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), 0xFFFFFFFF);
> -        }
> +	/* VFTA - enable all vlan filters */
> +	for (i = 0; i < IXGBE_MAX_VFTA; i++) {
> +		IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), 0xFFFFFFFF);
> +	}
>   
>   	/* Enable MAC Anti-Spoofing */
>   	hw->mac.ops.set_mac_anti_spoofing(hw, FALSE, vf_num);
> @@ -369,6 +370,73 @@ ixgbe_vf_reset(struct rte_eth_dev *dev, uint16_t vf, uint32_t *msgbuf)
>   }
>   
>   static int
> +ixgbe_negotiate_vf_api(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
> +{
> +	struct ixgbe_vf_info *vfinfo =
> +		*(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
> +	int api = msgbuf[1];
> +
> +	switch (api) {
> +	case ixgbe_mbox_api_10:
> +	case ixgbe_mbox_api_11:
> +		vfinfo[vf].vf_api = api;
> +		return 0;
> +	default:
> +		break;
> +	}
> +
> +	RTE_LOG(DEBUG, PMD, "VF %d requested invalid api version %u\n", vf, api);
> +	return -1;
> +}
> +
> +static int
> +ixgbe_get_vf_queues(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
> +{
> +	struct ixgbe_vf_info *vfinfo =
> +		*(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
> +	struct ixgbe_dcb_config *dcb_cfg =
> +			IXGBE_DEV_PRIVATE_TO_DCB_CFG(dev->data->dev_private);
> +
> +	uint8_t num_tcs = dcb_cfg->num_tcs.pg_tcs;
> +
> +	/* verify the PF is supporting the correct APIs */
> +	switch (vfinfo[vf].vf_api) {
> +	case ixgbe_mbox_api_10:
> +	case ixgbe_mbox_api_11:
> +		break;
> +	default:
> +		return -1;
> +	}
> +
> +	if (RTE_ETH_DEV_SRIOV(dev).active) {
> +		if (dev->data->dev_conf.rxmode.mq_mode == ETH_MQ_RX_VMDQ_DCB)
> +			msgbuf[IXGBE_VF_TX_QUEUES] = num_tcs;
> +		else
> +			msgbuf[IXGBE_VF_TX_QUEUES] = 1;
> +
> +		if (dev->data->dev_conf.txmode.mq_mode == ETH_MQ_TX_VMDQ_DCB)
> +			msgbuf[IXGBE_VF_RX_QUEUES] = num_tcs;
> +		else
> +			msgbuf[IXGBE_VF_RX_QUEUES] = 1;
> +	}	else {
> +		/* only allow 1 Tx queue for bandwidth limiting */
> +		msgbuf[IXGBE_VF_TX_QUEUES] = 1;
> +		msgbuf[IXGBE_VF_RX_QUEUES] = 1;
> +	}
> +
> +	/* notify VF of need for VLAN tag stripping, and correct queue */
> +	if (num_tcs)
> +		msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
> +	else
> +		msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
> +
> +	/* notify VF of default queue */
> +	msgbuf[IXGBE_VF_DEF_QUEUE] = 0;
> +
> +	return 0;
> +}
> +
> +static int
>   ixgbe_vf_set_mac_addr(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
>   {
>   	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> @@ -512,6 +580,12 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
>   	case IXGBE_VF_SET_VLAN:
>   		retval = ixgbe_vf_set_vlan(dev, vf, msgbuf);
>   		break;
> +	case IXGBE_VF_API_NEGOTIATE:
> +		retval = ixgbe_negotiate_vf_api(dev, vf, msgbuf);
> +		break;
> +	case IXGBE_VF_GET_QUEUES:
> +		retval = ixgbe_get_vf_queues(dev, vf, msgbuf);
> +		break;
>   	default:
>   		PMD_DRV_LOG(DEBUG, "Unhandled Msg %8.8x", (unsigned)msgbuf[0]);
>   		retval = IXGBE_ERR_MBX;
> @@ -526,7 +600,7 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
>   
>   	msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
>   
> -	ixgbe_write_mbx(hw, msgbuf, 1, vf);
> +	ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
>   
>   	return retval;
>   }
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> index e10d6a2..49b44fe 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> @@ -3166,10 +3166,9 @@ void ixgbe_configure_dcb(struct rte_eth_dev *dev)
>   
>   	/* check support mq_mode for DCB */
>   	if ((dev_conf->rxmode.mq_mode != ETH_MQ_RX_VMDQ_DCB) &&
> -	    (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB))
> -		return;
> -
> -	if (dev->data->nb_rx_queues != ETH_DCB_NUM_QUEUES)
> +	    (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB) &&
> +	    (dev_conf->txmode.mq_mode != ETH_MQ_TX_VMDQ_DCB) &&
> +	    (dev_conf->txmode.mq_mode != ETH_MQ_TX_DCB))
>   		return;
>   
>   	/** Configure DCB hardware **/