From: "Gonzalez Monroy, Sergio" <sergio.gonzalez.monroy@intel.com>
To: "Wiles, Keith" <keith.wiles@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [RFC PATCH] Simplify the ifdefs in rte.app.mk.
Date: Wed, 29 Apr 2015 09:04:14 +0100 [thread overview]
Message-ID: <5540907E.8060401@intel.com> (raw)
In-Reply-To: <D16523ED.1E27C%keith.wiles@intel.com>
On 28/04/2015 17:50, Wiles, Keith wrote:
> Hi Sergio
>
> On 4/28/15, 11:25 AM, "Gonzalez Monroy, Sergio"
> <sergio.gonzalez.monroy@intel.com> wrote:
>
>> On 28/04/2015 16:21, Keith Wiles wrote:
>>> Trying to simplify the ifdefs in rte.app.mk to make the code
>>> more readable and maintainable by moving LDLIBS variable to use
>>> the same style as LDLIBS-y being used in the rest of the code.
>>>
>>> Signed-off-by: Keith Wiles <keith.wiles@intel.com>
>>> ---
>> +1
>>
>> Patch looks good, just a few nits:
>>> mk/rte.app.mk | 253
>>> ++++++++++++++----------------------------------------
>>> mk/rte.hostapp.mk | 4 +-
>>> mk/rte.shared.mk | 12 +--
>>> 3 files changed, 74 insertions(+), 195 deletions(-)
>>>
>>> diff --git a/mk/rte.app.mk b/mk/rte.app.mk
>>> index 62a76ae..af38975 100644
>>> --- a/mk/rte.app.mk
>>> +++ b/mk/rte.app.mk
>>> @@ -1,7 +1,7 @@
>>> # BSD LICENSE
>>> #
>>> -# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
>>> -# Copyright(c) 2014 6WIND S.A.
>>> +# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
>>> +# Copyright(c) 2015 6WIND S.A.
>>> # All rights reserved.
>>> #
>>> # Redistribution and use in source and binary forms, with or without
>>> @@ -51,7 +51,7 @@ LDSCRIPT = $(RTE_LDSCRIPT)
>>> endif
>>>
>>> # default path for libs
>>> -LDLIBS += -L$(RTE_SDK_BIN)/lib
>>> +LDLIBS-y = -L$(RTE_SDK_BIN)/lib
>>>
>> I think we should keep the current value of LDLIBS.
>> Some apps (ie. examples/dpdk_qat ) preset LDLIBS before including
>> rte.app.mk.
> I just modified the example apps to use a new VARIABLE called EXTRA_LDLIBS
> instead and added it towards the bottom of rte.app.mk. I think adding the
> EXTRA_LDLIBS is the right solution instead of using LDLIBS IMO.
Fair enough :)
I suppose is semantics, and I may be wrong here, but my understanding
was that EXTRA_xxxx vars were to be used from the command line to pass
additional flags and/or override certain default flags, and that
CFLAGS/LDFLAGS/LDLIBS were used from each app/example makefile to
specify their own flags.
IMO we could achieve the correct order (ie. example/app
CFLAGS/LDFLAGS/LDLIBS being added at the end to override default flags)
without using EXTRA_xxxx vars from makefiles. Regarding this patch it
would be pretty simple by just adding LDLIBS at the end of LDLIBS-y.
Sergio
>>> #
>>> # Include libraries depending on config if NO_AUTOLIBS is not set
>>> @@ -59,215 +59,94 @@ LDLIBS += -L$(RTE_SDK_BIN)/lib
>>> #
>>> ifeq ($(NO_AUTOLIBS),)
>>>
>>> -LDLIBS += --whole-archive
>>> +LDLIBS-y += --whole-archive
>>>
>>> -ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),y)
>>> -LDLIBS += -l$(RTE_LIBNAME)
>>> -endif
>>> +LDLIBS-CONFIG_RTE_BUILD_COMBINE_LIBS) += -l$(RTE_LIBNAME)
>>>
>> I think here is missing $( before CONFIG.
> Ooops :-)
>>> ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_DISTRIBUTOR),y)
>>> -LDLIBS += -lrte_distributor
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_REORDER),y)
>>> -LDLIBS += -lrte_reorder
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
>>> -ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
>>> -LDLIBS += -lrte_kni
>>> -endif
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_IVSHMEM),y)
>>> -ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
>>> -LDLIBS += -lrte_ivshmem
>>> -endif
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PIPELINE),y)
>>> -LDLIBS += -lrte_pipeline
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_TABLE),y)
>>> -LDLIBS += -lrte_table
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PORT),y)
>>> -LDLIBS += -lrte_port
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_TIMER),y)
>>> -LDLIBS += -lrte_timer
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_HASH),y)
>>> -LDLIBS += -lrte_hash
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_JOBSTATS),y)
>>> -LDLIBS += -lrte_jobstats
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_LPM),y)
>>> -LDLIBS += -lrte_lpm
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_POWER),y)
>>> -LDLIBS += -lrte_power
>>> -endif
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += -lrte_distributor
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER) += -lrte_reorder
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_ACL),y)
>>> -LDLIBS += -lrte_acl
>>> +ifeq ($( CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_IVSHMEM) += -lrte_ivshmem
>>> endif
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_METER),y)
>>> -LDLIBS += -lrte_meter
>>> -endif
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_TIMER) += -lrte_timer
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_HASH) += -lrte_hash
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += -lrte_jobstats
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_LPM) += -lrte_lpm
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_POWER) += -lrte_power
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_ACL) += -lrte_acl
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_METER) += -lrte_meter
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_SCHED),y)
>>> -LDLIBS += -lrte_sched
>>> -LDLIBS += -lm
>>> -LDLIBS += -lrt
>>> -endif
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrte_sched
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lm
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_SCHED) += -lrt
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_VHOST), y)
>>> -LDLIBS += -lrte_vhost
>>> -endif
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lrte_vhost
>>>
>>> endif # ! CONFIG_RTE_BUILD_COMBINE_LIBS
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PMD_PCAP),y)
>>> -LDLIBS += -lpcap
>>> -endif
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lpcap
>>>
>>> ifeq ($(CONFIG_RTE_LIBRTE_VHOST)$(CONFIG_RTE_LIBRTE_VHOST_USER),yn)
>>> -LDLIBS += -lfuse
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_VHOST) += -lfuse
>>> endif
>> We could remove $(CONFIG_RTE_LIBRTE_VHOST) from the ifeq.
> OK, fine with me.
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_MLX4_PMD),y)
>>> -LDLIBS += -libverbs
>>> -endif
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -libverbs
>>>
>>> -LDLIBS += --start-group
>>> +LDLIBS-y += --start-group
>>>
>>> ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_KVARGS),y)
>>> -LDLIBS += -lrte_kvargs
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_MBUF),y)
>>> -LDLIBS += -lrte_mbuf
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_IP_FRAG),y)
>>> -LDLIBS += -lrte_ip_frag
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_ETHER),y)
>>> -LDLIBS += -lethdev
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_MALLOC),y)
>>> -LDLIBS += -lrte_malloc
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_MEMPOOL),y)
>>> -LDLIBS += -lrte_mempool
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_RING),y)
>>> -LDLIBS += -lrte_ring
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_EAL),y)
>>> -LDLIBS += -lrte_eal
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_CMDLINE),y)
>>> -LDLIBS += -lrte_cmdline
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_CFGFILE),y)
>>> -LDLIBS += -lrte_cfgfile
>>> -endif
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_KVARGS) += -lrte_kvargs
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_MBUF) += -lrte_mbuf
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += -lrte_ip_frag
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_ETHER) += -lethdev
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_MALLOC) += -lrte_malloc
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_RING) += -lrte_ring
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrte_eal
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE) += -lrte_cmdline
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_CFGFILE) += -lrte_cfgfile
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += -lrte_pmd_bond
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PMD_BOND),y)
>>> -LDLIBS += -lrte_pmd_bond
>>> -endif
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT) += -lrte_pmd_xenvirt
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT) += -lxenstore
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PMD_XENVIRT),y)
>>> -LDLIBS += -lrte_pmd_xenvirt
>>> -LDLIBS += -lxenstore
>>> -endif
>>>
>>> ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
>>> -# plugins (link only if static libraries)
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_VMXNET3_PMD),y)
>>> -LDLIBS += -lrte_pmd_vmxnet3_uio
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_VIRTIO_PMD),y)
>>> -LDLIBS += -lrte_pmd_virtio
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_ENIC_PMD),y)
>>> -LDLIBS += -lrte_pmd_enic
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_I40E_PMD),y)
>>> -LDLIBS += -lrte_pmd_i40e
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_FM10K_PMD),y)
>>> -LDLIBS += -lrte_pmd_fm10k
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_IXGBE_PMD),y)
>>> -LDLIBS += -lrte_pmd_ixgbe
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_E1000_PMD),y)
>>> -LDLIBS += -lrte_pmd_e1000
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_MLX4_PMD),y)
>>> -LDLIBS += -lrte_pmd_mlx4
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PMD_RING),y)
>>> -LDLIBS += -lrte_pmd_ring
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PMD_PCAP),y)
>>> -LDLIBS += -lrte_pmd_pcap
>>> -endif
>>> -
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PMD_AF_PACKET),y)
>>> -LDLIBS += -lrte_pmd_af_packet
>>> -endif
>>>
>>> -ifeq ($(CONFIG_RTE_LIBRTE_PMD_NULL),y)
>>> -LDLIBS += -lrte_pmd_null
>>> -endif
>>> -
>>> -endif # plugins
>>> +# plugins (link only if static libraries)
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_VMXNET3_PMD) += -lrte_pmd_vmxnet3_uio
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_VIRTIO_PMD) += -lrte_pmd_virtio
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_RING) += -lrte_pmd_ring
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP) += -lrte_pmd_pcap
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AF_PACKET) += -lrte_pmd_af_packet
>>> +LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL) += -lrte_pmd_null
>>> +
>>> +endif # ! $(CONFIG_RTE_BUILD_SHARED_LIB)
>>>
>>> endif # ! CONFIG_RTE_BUILD_COMBINE_LIBS
>>>
>>> -LDLIBS += $(EXECENV_LDLIBS)
>>> -
>>> -LDLIBS += --end-group
>>> -
>>> -LDLIBS += --no-whole-archive
>>> +LDLIBS-y += $(EXECENV_LDLIBS)
>>> +LDLIBS-y += --end-group
>>> +LDLIBS-y += --no-whole-archive
>>>
>>> endif # ifeq ($(NO_AUTOLIBS),)
>>>
>>> -LDLIBS += $(CPU_LDLIBS)
>>> +LDLIBS-y += $(CPU_LDLIBS)
>>>
>>> .PHONY: all
>>> all: install
>>> @@ -286,10 +165,10 @@ ifeq ($(LINK_USING_CC),1)
>>> override EXTRA_LDFLAGS := $(call linkerprefix,$(EXTRA_LDFLAGS))
>>> O_TO_EXE = $(CC) $(CFLAGS) $(LDFLAGS_$(@)) \
>>> -Wl,-Map=$(@).map,--cref -o $@ $(OBJS-y) $(call
>>> linkerprefix,$(LDFLAGS)) \
>>> - $(EXTRA_LDFLAGS) $(call linkerprefix,$(LDLIBS))
>>> + $(EXTRA_LDFLAGS) $(call linkerprefix,$(LDLIBS-y))
>>> else
>>> O_TO_EXE = $(LD) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
>>> - -Map=$(@).map --cref -o $@ $(OBJS-y) $(LDLIBS)
>>> + -Map=$(@).map --cref -o $@ $(OBJS-y) $(LDLIBS-y)
>>> endif
>>> O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight
>>> O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)"," LD $(@)")
>>> @@ -302,12 +181,12 @@ O_TO_EXE_DO = @set -e; \
>>> -include .$(APP).cmd
>>>
>>> # path where libraries are retrieved
>>> -LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter
>>> -Wl$(comma)-L%,$(LDLIBS)))
>>> -LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS)))
>>> +LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter
>>> -Wl$(comma)-L%,$(LDLIBS-y)))
>>> +LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS-y)))
>>>
>>> # list of .a files that are linked to this application
>>> -LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS)))
>>> -LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter
>>> -Wl$(comma)-l%,$(LDLIBS)))
>>> +LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS-y)))
>>> +LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter
>>> -Wl$(comma)-l%,$(LDLIBS-y)))
>>>
>>> # list of found libraries files (useful for deps). If not found, the
>>> # library is silently ignored and dep won't be checked
>>> diff --git a/mk/rte.hostapp.mk b/mk/rte.hostapp.mk
>>> index c44d0f8..51e8c1d 100644
>>> --- a/mk/rte.hostapp.mk
>>> +++ b/mk/rte.hostapp.mk
>>> @@ -58,7 +58,7 @@ build: _postbuild
>>> exe2cmd = $(strip $(call dotfile,$(patsubst %,%.cmd,$(1))))
>>>
>>> O_TO_EXE = $(HOSTCC) $(HOST_LDFLAGS) $(LDFLAGS_$(@)) \
>>> - $(EXTRA_HOST_LDFLAGS) -o $@ $(OBJS-y) $(LDLIBS)
>>> + $(EXTRA_HOST_LDFLAGS) -o $@ $(OBJS-y) $(LDLIBS-y)
>>> O_TO_EXE_STR = $(subst ','\'',$(O_TO_EXE)) #'# fix syntax highlight
>>> O_TO_EXE_DISP = $(if $(V),"$(O_TO_EXE_STR)"," HOSTLD $(@)")
>>> O_TO_EXE_CMD = "cmd_$@ = $(O_TO_EXE_STR)"
>>> @@ -72,7 +72,7 @@ O_TO_EXE_DO = @set -e; \
>>> # list of .a files that are linked to this application
>>> LDLIBS_FILES := $(wildcard \
>>> $(addprefix $(RTE_OUTPUT)/lib/, \
>>> - $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS)))))
>>> + $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS-y)))))
>>>
>>> #
>>> # Compile executable file if needed
>>> diff --git a/mk/rte.shared.mk b/mk/rte.shared.mk
>>> index fc6b0b4..56f20bb 100644
>>> --- a/mk/rte.shared.mk
>>> +++ b/mk/rte.shared.mk
>>> @@ -60,10 +60,10 @@ exe2cmd = $(strip $(call dotfile,$(patsubst
>>> %,%.cmd,$(1))))
>>> ifeq ($(LINK_USING_CC),1)
>>> override EXTRA_LDFLAGS := $(call linkerprefix,$(EXTRA_LDFLAGS))
>>> O_TO_SO = $(CC) $(call linkerprefix,$(LDFLAGS)) $(LDFLAGS_$(@))
>>> $(EXTRA_LDFLAGS) \
>>> - -shared -o $@ $(OBJS-y) $(call linkerprefix,$(LDLIBS))
>>> + -shared -o $@ $(OBJS-y) $(call linkerprefix,$(LDLIBS-y))
>>> else
>>> O_TO_SO = $(LD) $(LDFLAGS) $(LDFLAGS_$(@)) $(EXTRA_LDFLAGS) \
>>> - -shared -o $@ $(OBJS-y) $(LDLIBS)
>>> + -shared -o $@ $(OBJS-y) $(LDLIBS-y)
>>> endif
>>>
>>> O_TO_SO_STR = $(subst ','\'',$(O_TO_SO)) #'# fix syntax highlight
>>> @@ -77,12 +77,12 @@ O_TO_SO_DO = @set -e; \
>>> -include .$(SHARED).cmd
>>>
>>> # path where libraries are retrieved
>>> -LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter
>>> -Wl$(comma)-L%,$(LDLIBS)))
>>> -LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS)))
>>> +LDLIBS_PATH := $(subst -Wl$(comma)-L,,$(filter
>>> -Wl$(comma)-L%,$(LDLIBS-y)))
>>> +LDLIBS_PATH += $(subst -L,,$(filter -L%,$(LDLIBS-y)))
>>>
>>> # list of .a files that are linked to this application
>>> -LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS)))
>>> -LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter
>>> -Wl$(comma)-l%,$(LDLIBS)))
>>> +LDLIBS_NAMES := $(patsubst -l%,lib%.a,$(filter -l%,$(LDLIBS-y)))
>>> +LDLIBS_NAMES += $(patsubst -Wl$(comma)-l%,lib%.a,$(filter
>>> -Wl$(comma)-l%,$(LDLIBS-y)))
>>>
>>> # list of found libraries files (useful for deps). If not found, the
>>> # library is silently ignored and dep won't be checked
>> Sergio
next prev parent reply other threads:[~2015-04-29 8:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-28 15:21 Keith Wiles
2015-04-28 15:28 ` Wiles, Keith
2015-04-28 16:25 ` Gonzalez Monroy, Sergio
2015-04-28 16:50 ` Wiles, Keith
2015-04-29 8:04 ` Gonzalez Monroy, Sergio [this message]
2015-04-29 14:09 ` Wiles, Keith
2015-04-29 14:25 ` Wiles, Keith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5540907E.8060401@intel.com \
--to=sergio.gonzalez.monroy@intel.com \
--cc=dev@dpdk.org \
--cc=keith.wiles@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).