DPDK patches and discussions
 help / color / mirror / Atom feed
From: Zoltan Kiss <zoltan.kiss@linaro.org>
To: Cunming Liang <cunming.liang@intel.com>, dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v3] ixgbe: remove vector pmd burst size restriction
Date: Tue, 04 Aug 2015 17:26:07 +0100	[thread overview]
Message-ID: <55C0E79F.4030404@linaro.org> (raw)
In-Reply-To: <1438688832-15396-1-git-send-email-cunming.liang@intel.com>



On 04/08/15 12:47, Cunming Liang wrote:
> On receive side, the burst size now floor aligns to RTE_IXGBE_DESCS_PER_LOOP power of 2.
> According to this rule, the burst size less than 4 still won't receive anything.
> (Before this change, the burst size less than 32 can't receive anything.)
> _recv_*_pkts_vec returns no more than 32(RTE_IXGBE_RXQ_REARM_THRESH) packets.
>
> On transmit side, the max burst size no longer bind with a constant, however it still
> require to check the cross tx_rs_thresh violation.
>
> There's no obvious performance drop found on both recv_pkts_vec
> and recv_scattered_pkts_vec on burst size 32.
>
> Signed-off-by: Cunming Liang <cunming.liang@intel.com>
> ---
>   v3 change:
>    - reword the init print log
>
>   v2 change:
>    - keep max rx burst size in 32
>    - reword some comments
>
>   drivers/net/ixgbe/ixgbe_rxtx.c     |  4 +++-
>   drivers/net/ixgbe/ixgbe_rxtx.h     |  5 ++---
>   drivers/net/ixgbe/ixgbe_rxtx_vec.c | 39 +++++++++++++++++++++-----------------
>   3 files changed, 27 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
> index 91023b9..03eb45d 100644
> --- a/drivers/net/ixgbe/ixgbe_rxtx.c
> +++ b/drivers/net/ixgbe/ixgbe_rxtx.c
> @@ -4008,7 +4008,9 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev)
>   	 */
>   	} else if (adapter->rx_vec_allowed) {
>   		PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make sure RX "
> -				   "burst size no less than 32.");
> +				    "burst size no less than %d (port=%d).",
> +			     RTE_IXGBE_DESCS_PER_LOOP,
> +			     dev->data->port_id);

A tab seems to be missing from the indentation, otherwise:

Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>

>
>   		dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
>   	} else if (adapter->rx_bulk_alloc_allowed) {
> diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h
> index 113682a..b9eca67 100644
> --- a/drivers/net/ixgbe/ixgbe_rxtx.h
> +++ b/drivers/net/ixgbe/ixgbe_rxtx.h
> @@ -47,9 +47,8 @@
>   	(uint64_t) ((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM)
>
>   #ifdef RTE_IXGBE_INC_VECTOR
> -#define RTE_IXGBE_VPMD_RX_BURST         32
> -#define RTE_IXGBE_VPMD_TX_BURST         32
> -#define RTE_IXGBE_RXQ_REARM_THRESH      RTE_IXGBE_VPMD_RX_BURST
> +#define RTE_IXGBE_RXQ_REARM_THRESH      32
> +#define RTE_IXGBE_MAX_RX_BURST          RTE_IXGBE_RXQ_REARM_THRESH
>   #define RTE_IXGBE_TX_MAX_FREE_BUF_SZ    64
>   #endif
>
> diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec.c b/drivers/net/ixgbe/ixgbe_rxtx_vec.c
> index cf25a53..2ca0e4c 100644
> --- a/drivers/net/ixgbe/ixgbe_rxtx_vec.c
> +++ b/drivers/net/ixgbe/ixgbe_rxtx_vec.c
> @@ -245,13 +245,13 @@ desc_to_olflags_v(__m128i descs[4], struct rte_mbuf **rx_pkts)
>   #endif
>
>   /*
> - * vPMD receive routine, now only accept (nb_pkts == RTE_IXGBE_VPMD_RX_BURST)
> - * in one loop
> + * vPMD raw receive routine, only accept(nb_pkts >= RTE_IXGBE_DESCS_PER_LOOP)
>    *
>    * Notice:
> - * - nb_pkts < RTE_IXGBE_VPMD_RX_BURST, just return no packet
> - * - nb_pkts > RTE_IXGBE_VPMD_RX_BURST, only scan RTE_IXGBE_VPMD_RX_BURST
> + * - nb_pkts < RTE_IXGBE_DESCS_PER_LOOP, just return no packet
> + * - nb_pkts > RTE_IXGBE_MAX_RX_BURST, only scan RTE_IXGBE_MAX_RX_BURST
>    *   numbers of DD bit
> + * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two
>    * - don't support ol_flags for rss and csum err
>    */
>   static inline uint16_t
> @@ -286,8 +286,11 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
>   	__m128i dd_check, eop_check;
>   #endif /* RTE_NEXT_ABI */
>
> -	if (unlikely(nb_pkts < RTE_IXGBE_VPMD_RX_BURST))
> -		return 0;
> +	/* nb_pkts shall be less equal than RTE_IXGBE_MAX_RX_BURST */
> +	nb_pkts = RTE_MIN(nb_pkts, RTE_IXGBE_MAX_RX_BURST);
> +
> +	/* nb_pkts has to be floor-aligned to RTE_IXGBE_DESCS_PER_LOOP */
> +	nb_pkts = RTE_ALIGN_FLOOR(nb_pkts, RTE_IXGBE_DESCS_PER_LOOP);
>
>   	/* Just the act of getting into the function from the application is
>   	 * going to cost about 7 cycles */
> @@ -356,7 +359,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
>   	 * D. fill info. from desc to mbuf
>   	 */
>   #endif /* RTE_NEXT_ABI */
> -	for (pos = 0, nb_pkts_recd = 0; pos < RTE_IXGBE_VPMD_RX_BURST;
> +	for (pos = 0, nb_pkts_recd = 0; pos < nb_pkts;
>   			pos += RTE_IXGBE_DESCS_PER_LOOP,
>   			rxdp += RTE_IXGBE_DESCS_PER_LOOP) {
>   #ifdef RTE_NEXT_ABI
> @@ -518,13 +521,13 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
>   }
>
>   /*
> - * vPMD receive routine, now only accept (nb_pkts == RTE_IXGBE_VPMD_RX_BURST)
> - * in one loop
> + * vPMD receive routine, only accept(nb_pkts >= RTE_IXGBE_DESCS_PER_LOOP)
>    *
>    * Notice:
> - * - nb_pkts < RTE_IXGBE_VPMD_RX_BURST, just return no packet
> - * - nb_pkts > RTE_IXGBE_VPMD_RX_BURST, only scan RTE_IXGBE_VPMD_RX_BURST
> + * - nb_pkts < RTE_IXGBE_DESCS_PER_LOOP, just return no packet
> + * - nb_pkts > RTE_IXGBE_MAX_RX_BURST, only scan RTE_IXGBE_MAX_RX_BURST
>    *   numbers of DD bit
> + * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two
>    * - don't support ol_flags for rss and csum err
>    */
>   uint16_t
> @@ -538,12 +541,11 @@ static inline uint16_t
>   reassemble_packets(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_bufs,
>   		uint16_t nb_bufs, uint8_t *split_flags)
>   {
> -	struct rte_mbuf *pkts[RTE_IXGBE_VPMD_RX_BURST]; /*finished pkts*/
> +	struct rte_mbuf *pkts[nb_bufs]; /*finished pkts*/
>   	struct rte_mbuf *start = rxq->pkt_first_seg;
>   	struct rte_mbuf *end =  rxq->pkt_last_seg;
>   	unsigned pkt_idx, buf_idx;
>
> -
>   	for (buf_idx = 0, pkt_idx = 0; buf_idx < nb_bufs; buf_idx++) {
>   		if (end != NULL) {
>   			/* processing a split packet */
> @@ -603,14 +605,17 @@ reassemble_packets(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_bufs,
>    *
>    * Notice:
>    * - don't support ol_flags for rss and csum err
> - * - now only accept (nb_pkts == RTE_IXGBE_VPMD_RX_BURST)
> + * - nb_pkts < RTE_IXGBE_DESCS_PER_LOOP, just return no packet
> + * - nb_pkts > RTE_IXGBE_MAX_RX_BURST, only scan RTE_IXGBE_MAX_RX_BURST
> + *   numbers of DD bit
> + * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two
>    */
>   uint16_t
>   ixgbe_recv_scattered_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
>   		uint16_t nb_pkts)
>   {
>   	struct ixgbe_rx_queue *rxq = rx_queue;
> -	uint8_t split_flags[RTE_IXGBE_VPMD_RX_BURST] = {0};
> +	uint8_t split_flags[RTE_IXGBE_MAX_RX_BURST] = {0};
>
>   	/* get some new buffers */
>   	uint16_t nb_bufs = _recv_raw_pkts_vec(rxq, rx_pkts, nb_pkts,
> @@ -735,8 +740,8 @@ ixgbe_xmit_pkts_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
>   	uint64_t rs = IXGBE_ADVTXD_DCMD_RS|DCMD_DTYP_FLAGS;
>   	int i;
>
> -	if (unlikely(nb_pkts > RTE_IXGBE_VPMD_TX_BURST))
> -		nb_pkts = RTE_IXGBE_VPMD_TX_BURST;
> +	/* cross rx_thresh boundary is not allowed */
> +	nb_pkts = RTE_MIN(nb_pkts, txq->tx_rs_thresh);
>
>   	if (txq->nb_tx_free < txq->tx_free_thresh)
>   		ixgbe_tx_free_bufs(txq);
>

  reply	other threads:[~2015-08-04 16:26 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-31  8:17 [dpdk-dev] [PATCH v1] " Cunming Liang
2015-07-31  9:21 ` Ananyev, Konstantin
2015-07-31 10:03 ` Zoltan Kiss
2015-07-31 10:21   ` Ananyev, Konstantin
2015-07-31 11:57     ` Zoltan Kiss
2015-07-31 14:49       ` Zoltan Kiss
2015-08-03  7:41     ` Liang, Cunming
2015-08-03  9:59       ` Liang, Cunming
2015-08-03  2:40   ` Liang, Cunming
2015-08-04  7:32 ` [dpdk-dev] [PATCH v2] " Cunming Liang
2015-08-04  9:02   ` Zoltan Kiss
2015-08-04 11:15     ` Liang, Cunming
2015-08-04 11:47   ` [dpdk-dev] [PATCH v3] " Cunming Liang
2015-08-04 16:26     ` Zoltan Kiss [this message]
2015-08-05  6:28       ` Liang, Cunming
2015-08-05 15:59         ` Zoltan Kiss
2015-08-05  9:31     ` Ananyev, Konstantin
2015-09-09 13:16       ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55C0E79F.4030404@linaro.org \
    --to=zoltan.kiss@linaro.org \
    --cc=cunming.liang@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).