From: Tetsuya Mukawa <mukawa@igel.co.jp>
To: Bruce Richardson <bruce.richardson@intel.com>
Cc: dev@dpdk.org, ann.zhuangyanying@huawei.com
Subject: Re: [dpdk-dev] [RFC PATCH v3 2/2] vhost: Add VHOST PMD
Date: Fri, 23 Oct 2015 12:48:13 +0900 [thread overview]
Message-ID: <5629ADFD.9030202@igel.co.jp> (raw)
In-Reply-To: <20151022124921.GA20740@bricha3-MOBL3>
On 2015/10/22 21:49, Bruce Richardson wrote:
> On Thu, Oct 22, 2015 at 06:45:50PM +0900, Tetsuya Mukawa wrote:
>> The patch introduces a new PMD. This PMD is implemented as thin wrapper
>> of librte_vhost. It means librte_vhost is also needed to compile the PMD.
>> The vhost messages will be handled only when a port is started. So start
>> a port first, then invoke QEMU.
>>
>> The PMD has 2 parameters.
>> - iface: The parameter is used to specify a path connect to a
>> virtio-net device.
>> - queues: The parameter is used to specify the number of the queues
>> virtio-net device has.
>> (Default: 1)
>>
>> Here is an example.
>> $ ./testpmd -c f -n 4 --vdev 'eth_vhost0,iface=/tmp/sock0,queues=3' -- -i
>>
>> To connect above testpmd, here is qemu command example.
>>
>> $ qemu-system-x86_64 \
>> <snip>
>> -chardev socket,id=chr0,path=/tmp/sock0 \
>> -netdev vhost-user,id=net0,chardev=chr0,vhostforce \
>> -device virtio-net-pci,netdev=net0
>>
>> Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
> Hi Tetsuya,
>
> a few comments inline below.
>
> /Bruce
>
>> ---
>> config/common_linuxapp | 6 +
> <snip>
>> index 0000000..66bfc2b
>> --- /dev/null
>> +++ b/drivers/net/vhost/rte_eth_vhost.c
>> @@ -0,0 +1,735 @@
>> +/*-
>> + * BSD LICENSE
>> + *
>> + * Copyright (c) 2010-2015 Intel Corporation.
> This is probably not the copyright line you want on your new files.
Hi Bruce,
I appreciate your comments.
Yes, I will change above.
>> +
>> +static uint16_t
>> +eth_vhost_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs)
>> +{
>> + struct vhost_queue *r = q;
>> + uint16_t nb_rx = 0;
>> +
>> + if (unlikely(r->internal == NULL))
>> + return 0;
>> +
>> + if (unlikely(rte_atomic32_read(&r->allow_queuing) == 0))
>> + return 0;
>> +
>> + rte_atomic32_set(&r->while_queuing, 1);
>> +
>> + if (unlikely(rte_atomic32_read(&r->allow_queuing) == 0))
>> + goto out;
>> +
>> + /* Dequeue packets from guest TX queue */
>> + nb_rx = (uint16_t)rte_vhost_dequeue_burst(r->device,
>> + VIRTIO_TXQ, r->mb_pool, bufs, nb_bufs);
>> +
>> + rte_atomic64_add(&(r->rx_pkts), nb_rx);
> Do we really need to use atomics here? It will slow things down a lot. For
> other PMDs the assumption is always that only a single thread can access each
> queue at a time - it's up to the app to use locks to enforce that restriction
> if necessary.
I agree we don't need to use atomic here.
I will change it in next patches.
>> +static int
>> +new_device(struct virtio_net *dev)
>> +{
>> + struct rte_eth_dev *eth_dev;
>> + struct pmd_internal *internal;
>> + struct vhost_queue *vq;
>> + uint16_t queues;
>> + unsigned i;
>> +
>> + if (dev == NULL) {
>> + RTE_LOG(INFO, PMD, "invalid argument\n");
>> + return -1;
>> + }
>> +
>> + internal = find_internal_resource(dev->ifname);
>> + if (internal == NULL) {
>> + RTE_LOG(INFO, PMD, "invalid device name\n");
>> + return -1;
>> + }
>> +
>> + /*
>> + * Todo: To support multi queue, get the number of queues here.
>> + * So far, vhost provides only one queue.
>> + */
>> + queues = 1;
>> +
>> + if ((queues < internal->nb_rx_queues) ||
>> + (queues < internal->nb_tx_queues)) {
>> + RTE_LOG(INFO, PMD, "Not enough queues\n");
>> + return -1;
>> + }
>> +
>> + eth_dev = rte_eth_dev_allocated(internal->dev_name);
>> + if (eth_dev == NULL) {
>> + RTE_LOG(INFO, PMD, "failuer to find ethdev\n");
> typo "failure". Probably shoudl also be written just as "Failed to find ethdev".
Thanks, I will fix it.
>> +static struct eth_driver rte_vhost_pmd = {
>> + .pci_drv = {
>> + .name = "rte_vhost_pmd",
>> + .drv_flags = RTE_PCI_DRV_DETACHABLE,
>> + },
>> +};
> If you base this patchset on top of Bernard's patchset to remove the PCI devices
> then you shouldn't need these pci_dev and id_table structures.
Sure, I will check him latest patches. And will rebase on it.
Regards,
Tetsuya
next prev parent reply other threads:[~2015-10-23 3:48 UTC|newest]
Thread overview: 199+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-31 3:55 [dpdk-dev] [RFC PATCH v2] " Tetsuya Mukawa
2015-08-31 3:55 ` [dpdk-dev] [RFC PATCH v2] vhost: " Tetsuya Mukawa
2015-09-23 17:47 ` Loftus, Ciara
2015-10-16 8:40 ` Tetsuya Mukawa
2015-10-20 14:13 ` Loftus, Ciara
2015-10-21 4:30 ` Tetsuya Mukawa
2015-10-21 10:09 ` Bruce Richardson
2015-10-16 12:52 ` Bruce Richardson
2015-10-19 1:51 ` Tetsuya Mukawa
2015-10-19 9:32 ` Loftus, Ciara
2015-10-19 9:45 ` Bruce Richardson
2015-10-19 10:50 ` Tetsuya Mukawa
2015-10-19 13:26 ` Panu Matilainen
2015-10-19 13:27 ` Richardson, Bruce
2015-10-21 4:35 ` Tetsuya Mukawa
2015-10-21 6:25 ` Panu Matilainen
2015-10-21 10:22 ` Bruce Richardson
2015-10-22 9:50 ` Tetsuya Mukawa
2015-10-27 13:44 ` Traynor, Kevin
2015-10-28 2:24 ` Tetsuya Mukawa
2015-10-22 9:45 ` [dpdk-dev] [RFC PATCH v3 0/2] " Tetsuya Mukawa
2015-10-22 9:45 ` [dpdk-dev] [RFC PATCH v3 1/2] vhost: Add callback and private data for vhost PMD Tetsuya Mukawa
2015-10-27 6:12 ` [dpdk-dev] [PATCH 0/3] Add VHOST PMD Tetsuya Mukawa
2015-10-27 6:12 ` [dpdk-dev] [PATCH 1/3] vhost: Fix wrong handling of virtqueue array index Tetsuya Mukawa
2015-10-27 6:29 ` Yuanhan Liu
2015-10-27 6:33 ` Yuanhan Liu
2015-10-27 6:47 ` Yuanhan Liu
2015-10-27 7:28 ` Tetsuya Mukawa
2015-10-27 7:34 ` Yuanhan Liu
2015-10-27 6:12 ` [dpdk-dev] [PATCH 2/3] vhost: Add callback and private data for vhost PMD Tetsuya Mukawa
2015-10-30 17:49 ` Loftus, Ciara
2015-11-02 3:15 ` Tetsuya Mukawa
2015-10-27 6:12 ` [dpdk-dev] [PATCH 3/3] vhost: Add VHOST PMD Tetsuya Mukawa
2015-11-02 3:58 ` [dpdk-dev] [PATCH v2 0/2] " Tetsuya Mukawa
2015-11-02 3:58 ` [dpdk-dev] [PATCH v2 1/2] vhost: Add callback and private data for vhost PMD Tetsuya Mukawa
2015-11-09 5:16 ` [dpdk-dev] [PATCH v3 0/2] Add VHOST PMD Tetsuya Mukawa
2015-11-09 5:17 ` [dpdk-dev] [PATCH v3 1/2] vhost: Add callback and private data for vhost PMD Tetsuya Mukawa
2015-11-09 18:16 ` Aaron Conole
2015-11-10 3:13 ` Tetsuya Mukawa
2015-11-10 7:16 ` Panu Matilainen
2015-11-10 9:48 ` Tetsuya Mukawa
2015-11-10 10:05 ` Panu Matilainen
2015-11-10 10:15 ` Tetsuya Mukawa
2015-11-09 5:17 ` [dpdk-dev] [PATCH v3 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2015-11-09 6:21 ` Yuanhan Liu
2015-11-09 6:27 ` Tetsuya Mukawa
2015-11-09 22:22 ` Stephen Hemminger
2015-11-10 3:14 ` Tetsuya Mukawa
2015-11-12 12:52 ` Wang, Zhihong
2015-11-13 3:09 ` Tetsuya Mukawa
2015-11-13 3:50 ` Wang, Zhihong
2015-11-13 4:03 ` Rich Lane
2015-11-13 4:29 ` Tetsuya Mukawa
2015-11-13 5:20 ` [dpdk-dev] [PATCH v4 0/2] " Tetsuya Mukawa
2015-11-13 5:20 ` [dpdk-dev] [PATCH v4 1/2] vhost: Add callback and private data for vhost PMD Tetsuya Mukawa
2015-11-17 13:29 ` Yuanhan Liu
2015-11-19 2:03 ` Tetsuya Mukawa
2015-11-19 2:18 ` Yuanhan Liu
2015-11-19 3:13 ` Tetsuya Mukawa
2015-11-19 3:33 ` Yuanhan Liu
2015-11-19 5:14 ` Tetsuya Mukawa
2015-11-19 5:45 ` Yuanhan Liu
2015-11-19 5:58 ` Tetsuya Mukawa
[not found] ` <20151119063137.GJ2326@yliu-dev.sh.intel.com>
2015-11-19 6:37 ` Tetsuya Mukawa
2015-11-13 5:20 ` [dpdk-dev] [PATCH v4 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2015-11-16 1:57 ` Wang, Zhihong
2015-11-20 11:43 ` Yuanhan Liu
2015-11-24 2:48 ` Tetsuya Mukawa
2015-11-24 3:40 ` Yuanhan Liu
2015-11-24 3:44 ` Tetsuya Mukawa
2015-11-21 0:15 ` Rich Lane
2015-11-24 4:41 ` Tetsuya Mukawa
2015-11-24 9:00 ` [dpdk-dev] [PATCH v5 0/3] " Tetsuya Mukawa
2015-11-24 9:00 ` [dpdk-dev] [PATCH v5 1/3] vhost: Add callback and private data for vhost PMD Tetsuya Mukawa
2015-12-17 11:42 ` Yuanhan Liu
2015-12-18 3:15 ` Tetsuya Mukawa
2015-12-18 3:36 ` Tetsuya Mukawa
2015-12-18 4:15 ` Yuanhan Liu
2015-12-18 4:28 ` Tetsuya Mukawa
2015-12-18 18:01 ` Rich Lane
2015-12-21 2:10 ` Tetsuya Mukawa
2015-12-22 4:36 ` Yuanhan Liu
2015-12-22 3:41 ` Yuanhan Liu
2015-12-22 4:47 ` Rich Lane
2015-12-22 5:47 ` Yuanhan Liu
2015-12-22 9:38 ` Rich Lane
2015-12-23 2:44 ` Yuanhan Liu
2015-12-23 22:00 ` Thomas Monjalon
2015-12-24 3:51 ` Yuanhan Liu
2015-12-24 4:07 ` Tetsuya Mukawa
2015-12-24 3:09 ` Tetsuya Mukawa
2015-12-24 3:54 ` Tetsuya Mukawa
2015-12-24 4:00 ` Yuanhan Liu
2015-12-24 4:23 ` Tetsuya Mukawa
2015-12-24 5:37 ` Rich Lane
2015-12-24 7:58 ` Tetsuya Mukawa
2015-12-28 21:59 ` Rich Lane
2016-01-06 3:56 ` Tetsuya Mukawa
2016-01-06 7:38 ` Yuanhan Liu
2015-12-18 10:03 ` Xie, Huawei
2015-12-21 2:10 ` Tetsuya Mukawa
2016-02-02 11:18 ` [dpdk-dev] [PATCH v6 0/2] Add VHOST PMD Tetsuya Mukawa
2016-02-02 19:52 ` Rich Lane
2016-02-02 11:18 ` [dpdk-dev] [PATCH v6 1/2] ethdev: Add a new event type to notify a queue state changed event Tetsuya Mukawa
2016-02-02 11:18 ` [dpdk-dev] [PATCH v6 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2016-02-02 23:43 ` Ferruh Yigit
2016-02-03 2:13 ` Tetsuya Mukawa
2016-02-03 7:48 ` Tetsuya Mukawa
2016-02-03 9:24 ` Ferruh Yigit
2016-02-03 9:35 ` Tetsuya Mukawa
2016-02-04 7:26 ` [dpdk-dev] [PATCH v7 0/2] " Tetsuya Mukawa
2016-02-04 7:26 ` [dpdk-dev] [PATCH v7 1/2] ethdev: Add a new event type to notify a queue state changed event Tetsuya Mukawa
2016-02-04 7:26 ` [dpdk-dev] [PATCH v7 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2016-02-04 11:17 ` Ferruh Yigit
2016-02-05 6:28 ` Tetsuya Mukawa
2016-02-05 6:35 ` Yuanhan Liu
2016-02-05 7:10 ` Tetsuya Mukawa
2016-02-08 9:42 ` Ferruh Yigit
2016-02-09 1:54 ` Tetsuya Mukawa
2016-02-05 11:28 ` [dpdk-dev] [PATCH v8 0/2] " Tetsuya Mukawa
2016-02-05 11:28 ` [dpdk-dev] [PATCH v8 1/2] ethdev: Add a new event type to notify a queue state changed event Tetsuya Mukawa
2016-02-06 4:57 ` Yuanhan Liu
2016-02-05 11:28 ` [dpdk-dev] [PATCH v8 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2016-02-06 5:12 ` Yuanhan Liu
2016-02-09 9:38 ` [dpdk-dev] [PATCH v9 0/2] " Tetsuya Mukawa
2016-02-24 2:45 ` Qiu, Michael
2016-02-24 5:09 ` Tetsuya Mukawa
2016-02-25 7:51 ` Qiu, Michael
2016-02-26 4:29 ` Tetsuya Mukawa
2016-02-26 8:35 ` Tetsuya Mukawa
2016-03-01 2:00 ` Qiu, Michael
2016-03-01 2:19 ` Tetsuya Mukawa
2016-03-02 2:24 ` Qiu, Michael
2016-03-04 1:12 ` Tetsuya Mukawa
2016-02-09 9:38 ` [dpdk-dev] [PATCH v9 1/2] ethdev: Add a new event type to notify a queue state changed event Tetsuya Mukawa
2016-03-04 4:17 ` [dpdk-dev] [PATCH v10 0/2] Add VHOST PMD Tetsuya Mukawa
2016-03-04 4:17 ` [dpdk-dev] [PATCH v10 1/2] ethdev: Add a new event type to notify a queue state changed event Tetsuya Mukawa
2016-03-04 4:17 ` [dpdk-dev] [PATCH v10 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2016-03-04 8:39 ` Yuanhan Liu
2016-03-04 9:58 ` Tetsuya Mukawa
2016-03-07 2:07 ` [dpdk-dev] [PATCH v11 0/2] " Tetsuya Mukawa
2016-03-07 2:07 ` [dpdk-dev] [PATCH v11 1/2] ethdev: Add a new event type to notify a queue state changed event Tetsuya Mukawa
2016-03-07 2:07 ` [dpdk-dev] [PATCH v11 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2016-03-14 12:02 ` Bruce Richardson
2016-03-15 5:35 ` Tetsuya Mukawa
2016-03-15 8:31 ` [dpdk-dev] [PATCH v12 0/2] " Tetsuya Mukawa
2016-03-15 8:31 ` [dpdk-dev] [PATCH v12 1/2] ethdev: Add a new event type to notify a queue state changed event Tetsuya Mukawa
2016-03-18 13:54 ` Thomas Monjalon
2016-03-15 8:31 ` [dpdk-dev] [PATCH v12 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2016-03-18 12:27 ` Bruce Richardson
2016-03-18 13:41 ` Tetsuya Mukawa
2016-03-18 13:52 ` Thomas Monjalon
2016-03-18 14:03 ` Tetsuya Mukawa
2016-03-18 14:13 ` Bruce Richardson
2016-03-18 14:21 ` Tetsuya Mukawa
2016-03-21 5:41 ` Tetsuya Mukawa
2016-03-21 5:45 ` [dpdk-dev] [PATCH v13 0/2] " Tetsuya Mukawa
2016-03-21 12:42 ` Bruce Richardson
2016-03-21 5:45 ` [dpdk-dev] [PATCH v13 1/2] ethdev: Add a new event type to notify a queue state changed event Tetsuya Mukawa
2016-03-21 8:37 ` Thomas Monjalon
2016-03-21 9:24 ` Tetsuya Mukawa
2016-03-21 11:05 ` Bruce Richardson
2016-03-21 13:51 ` Tetsuya Mukawa
2016-03-21 5:45 ` [dpdk-dev] [PATCH v13 2/2] vhost: Add VHOST PMD Tetsuya Mukawa
2016-03-21 15:40 ` Loftus, Ciara
2016-03-22 1:55 ` Tetsuya Mukawa
2016-03-22 2:50 ` Tetsuya Mukawa
2016-03-22 10:33 ` Loftus, Ciara
2016-02-09 9:38 ` [dpdk-dev] [PATCH v9 " Tetsuya Mukawa
2015-11-24 9:00 ` [dpdk-dev] [PATCH v5 2/3] " Tetsuya Mukawa
2015-12-18 7:45 ` Yuanhan Liu
2015-12-18 9:25 ` Tetsuya Mukawa
2015-11-24 9:00 ` [dpdk-dev] [PATCH v5 3/3] vhost: Add helper function to convert port id to virtio device pointer Tetsuya Mukawa
2015-12-17 11:47 ` Yuanhan Liu
2015-12-18 3:15 ` Tetsuya Mukawa
2015-12-18 4:19 ` Yuanhan Liu
2015-12-08 1:12 ` [dpdk-dev] [PATCH v5 0/3] Add VHOST PMD Tetsuya Mukawa
2015-12-08 2:03 ` Yuanhan Liu
2015-12-08 2:10 ` Tetsuya Mukawa
2015-11-13 5:32 ` [dpdk-dev] [PATCH v4 0/2] " Yuanhan Liu
2015-11-13 5:37 ` Tetsuya Mukawa
2015-11-13 6:50 ` Tetsuya Mukawa
2015-11-17 13:26 ` Yuanhan Liu
2015-11-19 1:20 ` Tetsuya Mukawa
2015-11-09 5:42 ` [dpdk-dev] [PATCH v3 " Yuanhan Liu
2015-11-02 3:58 ` [dpdk-dev] [PATCH v2 2/2] vhost: " Tetsuya Mukawa
2015-11-06 2:22 ` Yuanhan Liu
2015-11-06 3:54 ` Tetsuya Mukawa
2015-11-05 2:17 ` [dpdk-dev] [PATCH v2 0/2] " Tetsuya Mukawa
2015-11-09 22:25 ` [dpdk-dev] [PATCH 3/3] vhost: " Stephen Hemminger
2015-11-10 3:27 ` Tetsuya Mukawa
2015-10-27 7:54 ` [dpdk-dev] [PATCH 0/3] " Tetsuya Mukawa
2015-10-30 18:30 ` Thomas Monjalon
2015-11-02 3:15 ` Tetsuya Mukawa
2015-10-22 9:45 ` [dpdk-dev] [RFC PATCH v3 2/2] vhost: " Tetsuya Mukawa
2015-10-22 12:49 ` Bruce Richardson
2015-10-23 3:48 ` Tetsuya Mukawa [this message]
2015-10-29 14:25 ` Xie, Huawei
2015-10-30 1:18 ` Tetsuya Mukawa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5629ADFD.9030202@igel.co.jp \
--to=mukawa@igel.co.jp \
--cc=ann.zhuangyanying@huawei.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).