* [dpdk-dev] WindRiver pktgen rx with error
@ 2013-08-06 2:00 Jia.Sui
0 siblings, 0 replies; only message in thread
From: Jia.Sui(贾睢) @ 2013-08-06 2:00 UTC (permalink / raw)
To: dev
[-- Attachment #1.1: Type: text/plain, Size: 636 bytes --]
Hi All,
Good morning~
I use WindRiver pktgen v2.1.3 on my servers, two server have same hardware.
Each one has two Intel Xeon E5-2648L CPU, 32G DDR3 RAM ,two 10G NIC which is supplied by Intel 82599 chip.
And the servers are running CentOS6.1
I run pktgen on both side. one as sender, the other as receiver.
If I only start transmit on one port, both Tx and Rx looks good, but if I enable two ports, the receiver will get rx error.
Please refer the attachment(pktgen_tx.png and pktgen_rx.png).
Did anyone meet this issue before?
Thank you!
PS: Sorry for my bad English, I’m not native.
Best Regards
Jia Sui
[-- Attachment #1.2: Type: text/html, Size: 3720 bytes --]
[-- Attachment #2: pktgen_tx.png --]
[-- Type: image/png, Size: 20632 bytes --]
[-- Attachment #3: pktgen_rx.png --]
[-- Type: image/png, Size: 21190 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-08-06 1:59 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-06 2:00 [dpdk-dev] WindRiver pktgen rx with error Jia.Sui
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).