DPDK patches and discussions
 help / color / mirror / Atom feed
From: yang_y_yi  <yang_y_yi@163.com>
To: "Thomas Monjalon" <thomas@monjalon.net>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	"yangyi01@inspur.com" <yangyi01@inspur.com>,
	"jiayu.hu@intel.com" <jiayu.hu@intel.com>
Subject: Re: [dpdk-dev] [PATCH v4] gso: add VXLAN UDP/IPv4 support
Date: Fri, 15 Jan 2021 11:51:25 +0800 (CST)
Message-ID: <59bcdd65.2506.177042b5666.Coremail.yang_y_yi@163.com> (raw)
In-Reply-To: <5c7751726a1f45299f99e9ccc13fb5e1@intel.com>



At 2020-11-19 14:49:23, "Hu, Jiayu" <jiayu.hu@intel.com> wrote:
>Acked-by: Jiayu Hu <jiayu.hu@intel.com>

Hi, Thomas

This patch has been acked very long, but it isn't merged into master, what's wrong?

>
>> -----Original Message-----
>> From: yang_y_yi@163.com <yang_y_yi@163.com>
>> Sent: Thursday, November 19, 2020 2:44 PM
>> To: dev@dpdk.org
>> Cc: Hu, Jiayu <jiayu.hu@intel.com>; thomas@monjalon.net;
>> yangyi01@inspur.com; yang_y_yi@163.com
>> Subject: [PATCH v4] gso: add VXLAN UDP/IPv4 support
>> 
>> From: Yi Yang <yangyi01@inspur.com>
>> 
>> As most NICs do not support segmentation for VXLAN-encapsulated
>> UDP/IPv4 packets, this patch adds VXLAN UDP/IPv4 GSO support.
>> OVS DPDK can significantly improve VXLAN UDP/IPv4 performance by
>> VXLAN UDP/IPv4 GSO.
>> 
>> Signed-off-by: Yi Yang <yangyi01@inspur.com>
>> ---
>> Changelog:
>> 
>> v3 -> v4:
>>   - Use more precise commit subject and log
>>   - Correct VxLAN to VXLAN (https://tools.ietf.org/html/rfc7348)
>> 
>> v2 -> v3:
>>   - Correct gso type check for UDP TSO.
>> 
>> v1 -> v2:
>>   - Remove condition check for outer udp header because it
>>     is always true for VXLAN.
>>   - Remove inner udp header update because it is wrong and
>>     unnecessary.
>> 
>> ---
>>  .../generic_segmentation_offload_lib.rst           | 18 ++--
>>  doc/guides/rel_notes/release_20_11.rst             |  4 +
>>  lib/librte_gso/gso_common.h                        |  5 ++
>>  lib/librte_gso/gso_tunnel_udp4.c                   | 97 ++++++++++++++++++++++
>>  lib/librte_gso/gso_tunnel_udp4.h                   | 44 ++++++++++
>>  lib/librte_gso/meson.build                         |  2 +-
>>  lib/librte_gso/rte_gso.c                           |  8 ++
>>  7 files changed, 168 insertions(+), 10 deletions(-)
>>  create mode 100644 lib/librte_gso/gso_tunnel_udp4.c
>>  create mode 100644 lib/librte_gso/gso_tunnel_udp4.h
>> 
>> diff --git a/doc/guides/prog_guide/generic_segmentation_offload_lib.rst
>> b/doc/guides/prog_guide/generic_segmentation_offload_lib.rst
>> index ad91c6e..7bff0ae 100644
>> --- a/doc/guides/prog_guide/generic_segmentation_offload_lib.rst
>> +++ b/doc/guides/prog_guide/generic_segmentation_offload_lib.rst
>> @@ -45,8 +45,8 @@ Limitations
>> 
>>   - TCP
>>   - UDP
>> - - VxLAN
>> - - GRE
>> + - VXLAN
>> + - GRE TCP
>> 
>>    See `Supported GSO Packet Types`_ for further details.
>> 
>> @@ -157,14 +157,14 @@ does not modify it during segmentation. Therefore,
>> after UDP GSO, only the
>>  first output packet has the original UDP header, and others just have l2
>>  and l3 headers.
>> 
>> -VxLAN GSO
>> -~~~~~~~~~
>> -VxLAN packets GSO supports segmentation of suitably large VxLAN packets,
>> -which contain an outer IPv4 header, inner TCP/IPv4 headers, and optional
>> -inner and/or outer VLAN tag(s).
>> +VXLAN IPv4 GSO
>> +~~~~~~~~~~~~~~
>> +VXLAN packets GSO supports segmentation of suitably large VXLAN packets,
>> +which contain an outer IPv4 header, inner TCP/IPv4 or UDP/IPv4 headers,
>> and
>> +optional inner and/or outer VLAN tag(s).
>> 
>> -GRE GSO
>> -~~~~~~~
>> +GRE TCP/IPv4 GSO
>> +~~~~~~~~~~~~~~~~
>>  GRE GSO supports segmentation of suitably large GRE packets, which
>> contain
>>  an outer IPv4 header, inner TCP/IPv4 headers, and an optional VLAN tag.
>> 
>> diff --git a/doc/guides/rel_notes/release_20_11.rst
>> b/doc/guides/rel_notes/release_20_11.rst
>> index 24cedba..04aba33 100644
>> --- a/doc/guides/rel_notes/release_20_11.rst
>> +++ b/doc/guides/rel_notes/release_20_11.rst
>> @@ -422,6 +422,10 @@ New Features
>>    leverage IOAT DMA channel with vhost asynchronous APIs.
>>    See the :doc:`../sample_app_ug/vhost` for more details.
>> 
>> +* **Added VXLAN UDP/IPv4 GSO support.**
>> +
>> +  Added inner UDP/IPv4 support for VXLAN IPv4 GSO.
>> +
>> 
>>  Removed Items
>>  -------------
>> diff --git a/lib/librte_gso/gso_common.h b/lib/librte_gso/gso_common.h
>> index a0b8343..4d5f303 100644
>> --- a/lib/librte_gso/gso_common.h
>> +++ b/lib/librte_gso/gso_common.h
>> @@ -26,6 +26,11 @@
>>  		(PKT_TX_TCP_SEG | PKT_TX_IPV4 | PKT_TX_OUTER_IPV4 | \
>>  		 PKT_TX_TUNNEL_VXLAN))
>> 
>> +#define IS_IPV4_VXLAN_UDP4(flag) (((flag) & (PKT_TX_UDP_SEG |
>> PKT_TX_IPV4 | \
>> +				PKT_TX_OUTER_IPV4 |
>> PKT_TX_TUNNEL_MASK)) == \
>> +		(PKT_TX_UDP_SEG | PKT_TX_IPV4 | PKT_TX_OUTER_IPV4 | \
>> +		 PKT_TX_TUNNEL_VXLAN))
>> +
>>  #define IS_IPV4_GRE_TCP4(flag) (((flag) & (PKT_TX_TCP_SEG | PKT_TX_IPV4
>> | \
>>  				PKT_TX_OUTER_IPV4 |
>> PKT_TX_TUNNEL_MASK)) == \
>>  		(PKT_TX_TCP_SEG | PKT_TX_IPV4 | PKT_TX_OUTER_IPV4 | \
>> diff --git a/lib/librte_gso/gso_tunnel_udp4.c
>> b/lib/librte_gso/gso_tunnel_udp4.c
>> new file mode 100644
>> index 0000000..1fc7a8d
>> --- /dev/null
>> +++ b/lib/librte_gso/gso_tunnel_udp4.c
>> @@ -0,0 +1,97 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright(c) 2020 Inspur Corporation
>> + */
>> +
>> +#include "gso_common.h"
>> +#include "gso_tunnel_udp4.h"
>> +
>> +#define IPV4_HDR_MF_BIT (1U << 13)
>> +
>> +static void
>> +update_tunnel_ipv4_udp_headers(struct rte_mbuf *pkt, struct rte_mbuf
>> **segs,
>> +			       uint16_t nb_segs)
>> +{
>> +	struct rte_ipv4_hdr *ipv4_hdr;
>> +	uint16_t outer_id, inner_id, tail_idx, i, length;
>> +	uint16_t outer_ipv4_offset, inner_ipv4_offset;
>> +	uint16_t outer_udp_offset;
>> +	uint16_t frag_offset = 0, is_mf;
>> +
>> +	outer_ipv4_offset = pkt->outer_l2_len;
>> +	outer_udp_offset = outer_ipv4_offset + pkt->outer_l3_len;
>> +	inner_ipv4_offset = outer_udp_offset + pkt->l2_len;
>> +
>> +	/* Outer IPv4 header. */
>> +	ipv4_hdr = (struct rte_ipv4_hdr *)(rte_pktmbuf_mtod(pkt, char *) +
>> +			outer_ipv4_offset);
>> +	outer_id = rte_be_to_cpu_16(ipv4_hdr->packet_id);
>> +
>> +	/* Inner IPv4 header. */
>> +	ipv4_hdr = (struct rte_ipv4_hdr *)(rte_pktmbuf_mtod(pkt, char *) +
>> +			inner_ipv4_offset);
>> +	inner_id = rte_be_to_cpu_16(ipv4_hdr->packet_id);
>> +
>> +	tail_idx = nb_segs - 1;
>> +
>> +	for (i = 0; i < nb_segs; i++) {
>> +		update_ipv4_header(segs[i], outer_ipv4_offset, outer_id);
>> +		update_udp_header(segs[i], outer_udp_offset);
>> +		update_ipv4_header(segs[i], inner_ipv4_offset, inner_id);
>> +		/* For the case inner packet is UDP, we must keep UDP
>> +		 * datagram boundary, it must be handled as IP fragment.
>> +		 *
>> +		 * Set IP fragment offset for inner IP header.
>> +		 */
>> +		ipv4_hdr = (struct rte_ipv4_hdr *)
>> +			(rte_pktmbuf_mtod(segs[i], char *) +
>> +				inner_ipv4_offset);
>> +		is_mf = i < tail_idx ? IPV4_HDR_MF_BIT : 0;
>> +		ipv4_hdr->fragment_offset =
>> +			rte_cpu_to_be_16(frag_offset | is_mf);
>> +		length = segs[i]->pkt_len - inner_ipv4_offset - pkt->l3_len;
>> +		frag_offset += (length >> 3);
>> +		outer_id++;
>> +	}
>> +}
>> +
>> +int
>> +gso_tunnel_udp4_segment(struct rte_mbuf *pkt,
>> +		uint16_t gso_size,
>> +		struct rte_mempool *direct_pool,
>> +		struct rte_mempool *indirect_pool,
>> +		struct rte_mbuf **pkts_out,
>> +		uint16_t nb_pkts_out)
>> +{
>> +	struct rte_ipv4_hdr *inner_ipv4_hdr;
>> +	uint16_t pyld_unit_size, hdr_offset, frag_off;
>> +	int ret;
>> +
>> +	hdr_offset = pkt->outer_l2_len + pkt->outer_l3_len + pkt->l2_len;
>> +	inner_ipv4_hdr = (struct rte_ipv4_hdr *)(rte_pktmbuf_mtod(pkt,
>> char *) +
>> +			hdr_offset);
>> +	/*
>> +	 * Don't process the packet whose MF bit or offset in the inner
>> +	 * IPv4 header are non-zero.
>> +	 */
>> +	frag_off = rte_be_to_cpu_16(inner_ipv4_hdr->fragment_offset);
>> +	if (unlikely(IS_FRAGMENTED(frag_off)))
>> +		return 0;
>> +
>> +	hdr_offset += pkt->l3_len;
>> +	/* Don't process the packet without data */
>> +	if ((hdr_offset + pkt->l4_len) >= pkt->pkt_len)
>> +		return 0;
>> +
>> +	/* pyld_unit_size must be a multiple of 8 because frag_off
>> +	 * uses 8 bytes as unit.
>> +	 */
>> +	pyld_unit_size = (gso_size - hdr_offset) & ~7U;
>> +
>> +	/* Segment the payload */
>> +	ret = gso_do_segment(pkt, hdr_offset, pyld_unit_size, direct_pool,
>> +			indirect_pool, pkts_out, nb_pkts_out);
>> +	if (ret > 1)
>> +		update_tunnel_ipv4_udp_headers(pkt, pkts_out, ret);
>> +
>> +	return ret;
>> +}
>> diff --git a/lib/librte_gso/gso_tunnel_udp4.h
>> b/lib/librte_gso/gso_tunnel_udp4.h
>> new file mode 100644
>> index 0000000..c49b43f
>> --- /dev/null
>> +++ b/lib/librte_gso/gso_tunnel_udp4.h
>> @@ -0,0 +1,44 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright(c) 2020 Inspur Corporation
>> + */
>> +
>> +#ifndef _GSO_TUNNEL_UDP4_H_
>> +#define _GSO_TUNNEL_UDP4_H_
>> +
>> +#include <stdint.h>
>> +#include <rte_mbuf.h>
>> +
>> +/**
>> + * Segment a tunneling packet with inner UDP/IPv4 headers. This function
>> + * does not check if the input packet has correct checksums, and does not
>> + * update checksums for output GSO segments. Furthermore, it does not
>> + * process IP fragment packets.
>> + *
>> + * @param pkt
>> + *  The packet mbuf to segment.
>> + * @param gso_size
>> + *  The max length of a GSO segment, measured in bytes.
>> + * @param direct_pool
>> + *  MBUF pool used for allocating direct buffers for output segments.
>> + * @param indirect_pool
>> + *  MBUF pool used for allocating indirect buffers for output segments.
>> + * @param pkts_out
>> + *  Pointer array used to store the MBUF addresses of output GSO
>> + *  segments, when it succeeds. If the memory space in pkts_out is
>> + *  insufficient, it fails and returns -EINVAL.
>> + * @param nb_pkts_out
>> + *  The max number of items that 'pkts_out' can keep.
>> + *
>> + * @return
>> + *   - The number of GSO segments filled in pkts_out on success.
>> + *   - Return 0 if it needn't GSO.
>> + *   - Return -ENOMEM if run out of memory in MBUF pools.
>> + *   - Return -EINVAL for invalid parameters.
>> + */
>> +int gso_tunnel_udp4_segment(struct rte_mbuf *pkt,
>> +		uint16_t gso_size,
>> +		struct rte_mempool *direct_pool,
>> +		struct rte_mempool *indirect_pool,
>> +		struct rte_mbuf **pkts_out,
>> +		uint16_t nb_pkts_out);
>> +#endif
>> diff --git a/lib/librte_gso/meson.build b/lib/librte_gso/meson.build
>> index ad8dd85..05904f2 100644
>> --- a/lib/librte_gso/meson.build
>> +++ b/lib/librte_gso/meson.build
>> @@ -2,6 +2,6 @@
>>  # Copyright(c) 2017 Intel Corporation
>> 
>>  sources = files('gso_common.c', 'gso_tcp4.c', 'gso_udp4.c',
>> - 		'gso_tunnel_tcp4.c', 'rte_gso.c')
>> +		'gso_tunnel_tcp4.c', 'gso_tunnel_udp4.c', 'rte_gso.c')
>>  headers = files('rte_gso.h')
>>  deps += ['ethdev']
>> diff --git a/lib/librte_gso/rte_gso.c b/lib/librte_gso/rte_gso.c
>> index 896350e..0d02ec3 100644
>> --- a/lib/librte_gso/rte_gso.c
>> +++ b/lib/librte_gso/rte_gso.c
>> @@ -11,6 +11,7 @@
>>  #include "gso_common.h"
>>  #include "gso_tcp4.h"
>>  #include "gso_tunnel_tcp4.h"
>> +#include "gso_tunnel_udp4.h"
>>  #include "gso_udp4.h"
>> 
>>  #define ILLEGAL_UDP_GSO_CTX(ctx) \
>> @@ -60,6 +61,13 @@
>>  		ret = gso_tunnel_tcp4_segment(pkt, gso_size, ipid_delta,
>>  				direct_pool, indirect_pool,
>>  				pkts_out, nb_pkts_out);
>> +	} else if (IS_IPV4_VXLAN_UDP4(pkt->ol_flags) &&
>> +			(gso_ctx->gso_types &
>> DEV_TX_OFFLOAD_VXLAN_TNL_TSO) &&
>> +			(gso_ctx->gso_types & DEV_TX_OFFLOAD_UDP_TSO))
>> {
>> +		pkt->ol_flags &= (~PKT_TX_UDP_SEG);
>> +		ret = gso_tunnel_udp4_segment(pkt, gso_size,
>> +				direct_pool, indirect_pool,
>> +				pkts_out, nb_pkts_out);
>>  	} else if (IS_IPV4_TCP(pkt->ol_flags) &&
>>  			(gso_ctx->gso_types & DEV_TX_OFFLOAD_TCP_TSO))
>> {
>>  		pkt->ol_flags &= (~PKT_TX_TCP_SEG);
>> --
>> 1.8.3.1



  reply	other threads:[~2021-01-15  3:51 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01  6:46 [dpdk-dev] [PATCH] gso: add VXLAN UDP GSO support yang_y_yi
2020-09-27  5:57 ` yang_y_yi
2020-10-29  6:47 ` [dpdk-dev] [PATCH v1] " yang_y_yi
2020-11-06  4:09   ` Jiayu Hu
2020-11-09  1:03     ` yang_y_yi
2020-11-10  2:21 ` [dpdk-dev] [PATCH v2] " yang_y_yi
2020-11-13 13:16   ` Ananyev, Konstantin
2020-11-16  0:50     ` yang_y_yi
2020-11-16  1:11   ` [dpdk-dev] [PATCH v3] " yang_y_yi
2020-11-19  5:37     ` Hu, Jiayu
2020-11-19  6:43     ` [dpdk-dev] [PATCH v4] gso: add VXLAN UDP/IPv4 support yang_y_yi
2020-11-19  6:49       ` Hu, Jiayu
2021-01-15  3:51         ` yang_y_yi [this message]
2021-01-15 10:24           ` Thomas Monjalon
2021-01-18  0:05             ` yang_y_yi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=59bcdd65.2506.177042b5666.Coremail.yang_y_yi@163.com \
    --to=yang_y_yi@163.com \
    --cc=dev@dpdk.org \
    --cc=jiayu.hu@intel.com \
    --cc=thomas@monjalon.net \
    --cc=yangyi01@inspur.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git