[dpdk-dev] Query about this NIC

[dpdk-dev] Query about this NIC

[Prashant Upadhyaya]

Hi,

Would the following NIC work with DPDK -

Intel 10-Gigabit Ethernet X520-DA2 Server Adapter E10G42BTDA PCIe
Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

Regards
-Prashant





===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================

Re: [dpdk-dev] Query about this NIC

[Jayakumar, Muthurajan]

Hi Prashant, 
Thanks for using Intel DPDK.
Intel DPDK supports X520-T2  (previously code named "Iron Pond")

Will find out the differences between X520-T2 and  X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

BTW, have you used X520-T2?

Thank you,
M Jay

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Prashant Upadhyaya
Sent: Thursday, January 09, 2014 7:39 AM
To: dev@dpdk.org
Subject: [dpdk-dev] Query about this NIC

Hi,

Would the following NIC work with DPDK -

Intel 10-Gigabit Ethernet X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

Regards
-Prashant





===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================

Re: [dpdk-dev] Query about this NIC

[Prashant Upadhyaya]

Hi,

No, I have not used X520-T2 before.

If anybody on the list has used the above successfully, please advise.

Jayant, I will await your advice.

Regards
-Prashant


-----Original Message-----
From: Jayakumar, Muthurajan [mailto:muthurajan.jayakumar@intel.com]
Sent: Thursday, January 09, 2014 9:32 PM
To: Prashant Upadhyaya; dev@dpdk.org
Subject: RE: Query about this NIC

Hi Prashant,
Thanks for using Intel DPDK.
Intel DPDK supports X520-T2  (previously code named "Iron Pond")

Will find out the differences between X520-T2 and  X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

BTW, have you used X520-T2?

Thank you,
M Jay

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Prashant Upadhyaya
Sent: Thursday, January 09, 2014 7:39 AM
To: dev@dpdk.org
Subject: [dpdk-dev] Query about this NIC

Hi,

Would the following NIC work with DPDK -

Intel 10-Gigabit Ethernet X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

Regards
-Prashant





===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================




===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================

Re: [dpdk-dev] Query about this NIC

[Jayakumar, Muthurajan]

Hi Prashant, 

X520-T2 is supported and documented in the release notes.

Can you please use X520-T2  as a starting point 

Thanks

-----Original Message-----
From: Prashant Upadhyaya [mailto:prashant.upadhyaya@aricent.com] 
Sent: Thursday, January 09, 2014 8:07 AM
To: Jayakumar, Muthurajan; dev@dpdk.org
Subject: RE: Query about this NIC

Hi,

No, I have not used X520-T2 before.

If anybody on the list has used the above successfully, please advise.

Jayant, I will await your advice.

Regards
-Prashant


-----Original Message-----
From: Jayakumar, Muthurajan [mailto:muthurajan.jayakumar@intel.com]
Sent: Thursday, January 09, 2014 9:32 PM
To: Prashant Upadhyaya; dev@dpdk.org
Subject: RE: Query about this NIC

Hi Prashant,
Thanks for using Intel DPDK.
Intel DPDK supports X520-T2  (previously code named "Iron Pond")

Will find out the differences between X520-T2 and  X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

BTW, have you used X520-T2?

Thank you,
M Jay

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Prashant Upadhyaya
Sent: Thursday, January 09, 2014 7:39 AM
To: dev@dpdk.org
Subject: [dpdk-dev] Query about this NIC

Hi,

Would the following NIC work with DPDK -

Intel 10-Gigabit Ethernet X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

Regards
-Prashant





===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================




===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================

Re: [dpdk-dev] Query about this NIC

[Jayakumar, Muthurajan]

Both NICs should work under DPDK. The T2 variant is a 10GBase-T NIC and the DA is a SFP based NIC.

-----Original Message-----
From: Prashant Upadhyaya [mailto:prashant.upadhyaya@aricent.com] 
Sent: Thursday, January 09, 2014 8:07 AM
To: Jayakumar, Muthurajan; dev@dpdk.org
Subject: RE: Query about this NIC

Hi,

No, I have not used X520-T2 before.

If anybody on the list has used the above successfully, please advise.

Jayant, I will await your advice.

Regards
-Prashant


-----Original Message-----
From: Jayakumar, Muthurajan [mailto:muthurajan.jayakumar@intel.com]
Sent: Thursday, January 09, 2014 9:32 PM
To: Prashant Upadhyaya; dev@dpdk.org
Subject: RE: Query about this NIC

Hi Prashant,
Thanks for using Intel DPDK.
Intel DPDK supports X520-T2  (previously code named "Iron Pond")

Will find out the differences between X520-T2 and  X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

BTW, have you used X520-T2?

Thank you,
M Jay

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Prashant Upadhyaya
Sent: Thursday, January 09, 2014 7:39 AM
To: dev@dpdk.org
Subject: [dpdk-dev] Query about this NIC

Hi,

Would the following NIC work with DPDK -

Intel 10-Gigabit Ethernet X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

Regards
-Prashant





===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================




===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================

Re: [dpdk-dev] Query about this NIC

[Schumm, Ken]

We have used the DA2 variant successfully with DPDK.

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Jayakumar, Muthurajan
Sent: Thursday, January 09, 2014 8:31 AM
To: Prashant Upadhyaya; dev@dpdk.org
Subject: Re: [dpdk-dev] Query about this NIC


Both NICs should work under DPDK. The T2 variant is a 10GBase-T NIC and the DA is a SFP based NIC.

-----Original Message-----
From: Prashant Upadhyaya [mailto:prashant.upadhyaya@aricent.com] 
Sent: Thursday, January 09, 2014 8:07 AM
To: Jayakumar, Muthurajan; dev@dpdk.org
Subject: RE: Query about this NIC

Hi,

No, I have not used X520-T2 before.

If anybody on the list has used the above successfully, please advise.

Jayant, I will await your advice.

Regards
-Prashant


-----Original Message-----
From: Jayakumar, Muthurajan [mailto:muthurajan.jayakumar@intel.com]
Sent: Thursday, January 09, 2014 9:32 PM
To: Prashant Upadhyaya; dev@dpdk.org
Subject: RE: Query about this NIC

Hi Prashant,
Thanks for using Intel DPDK.
Intel DPDK supports X520-T2  (previously code named "Iron Pond")

Will find out the differences between X520-T2 and  X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

BTW, have you used X520-T2?

Thank you,
M Jay

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Prashant Upadhyaya
Sent: Thursday, January 09, 2014 7:39 AM
To: dev@dpdk.org
Subject: [dpdk-dev] Query about this NIC

Hi,

Would the following NIC work with DPDK -

Intel 10-Gigabit Ethernet X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

Regards
-Prashant





===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================




===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================

Re: [dpdk-dev] Query about this NIC

[Jayakumar, Muthurajan]

Thank you Ken

-----Original Message-----
From: Schumm, Ken 
Sent: Thursday, January 09, 2014 8:33 AM
To: Jayakumar, Muthurajan; Prashant Upadhyaya; dev@dpdk.org
Subject: RE: Query about this NIC

We have used the DA2 variant successfully with DPDK.

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Jayakumar, Muthurajan
Sent: Thursday, January 09, 2014 8:31 AM
To: Prashant Upadhyaya; dev@dpdk.org
Subject: Re: [dpdk-dev] Query about this NIC


Both NICs should work under DPDK. The T2 variant is a 10GBase-T NIC and the DA is a SFP based NIC.

-----Original Message-----
From: Prashant Upadhyaya [mailto:prashant.upadhyaya@aricent.com] 
Sent: Thursday, January 09, 2014 8:07 AM
To: Jayakumar, Muthurajan; dev@dpdk.org
Subject: RE: Query about this NIC

Hi,

No, I have not used X520-T2 before.

If anybody on the list has used the above successfully, please advise.

Jayant, I will await your advice.

Regards
-Prashant


-----Original Message-----
From: Jayakumar, Muthurajan [mailto:muthurajan.jayakumar@intel.com]
Sent: Thursday, January 09, 2014 9:32 PM
To: Prashant Upadhyaya; dev@dpdk.org
Subject: RE: Query about this NIC

Hi Prashant,
Thanks for using Intel DPDK.
Intel DPDK supports X520-T2  (previously code named "Iron Pond")

Will find out the differences between X520-T2 and  X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

BTW, have you used X520-T2?

Thank you,
M Jay

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Prashant Upadhyaya
Sent: Thursday, January 09, 2014 7:39 AM
To: dev@dpdk.org
Subject: [dpdk-dev] Query about this NIC

Hi,

Would the following NIC work with DPDK -

Intel 10-Gigabit Ethernet X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile

Regards
-Prashant





===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================




===============================================================================
Please refer to http://www.aricent.com/legal/email_disclaimer.html
for important disclosures regarding this electronic communication.
===============================================================================

Re: [dpdk-dev] Query about this NIC

[Daniel Kan]

I’m using  X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ to evaluate DPDK. It works fine as far as i can tell. 

Dan

On Jan 9, 2014, at 8:06 AM, Prashant Upadhyaya <prashant.upadhyaya@aricent.com> wrote:

> Hi,
> 
> No, I have not used X520-T2 before.
> 
> If anybody on the list has used the above successfully, please advise.
> 
> Jayant, I will await your advice.
> 
> Regards
> -Prashant
> 
> 
> -----Original Message-----
> From: Jayakumar, Muthurajan [mailto:muthurajan.jayakumar@intel.com]
> Sent: Thursday, January 09, 2014 9:32 PM
> To: Prashant Upadhyaya; dev@dpdk.org
> Subject: RE: Query about this NIC
> 
> Hi Prashant,
> Thanks for using Intel DPDK.
> Intel DPDK supports X520-T2  (previously code named "Iron Pond")
> 
> Will find out the differences between X520-T2 and  X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile
> 
> BTW, have you used X520-T2?
> 
> Thank you,
> M Jay
> 
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Prashant Upadhyaya
> Sent: Thursday, January 09, 2014 7:39 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] Query about this NIC
> 
> Hi,
> 
> Would the following NIC work with DPDK -
> 
> Intel 10-Gigabit Ethernet X520-DA2 Server Adapter E10G42BTDA PCIe Dual-Port 2xSFP+ Copper 10GSFP+Cu Low-Profile
> 
> Regards
> -Prashant
> 
> 
> 
> 
> 
> ===============================================================================
> Please refer to http://www.aricent.com/legal/email_disclaimer.html
> for important disclosures regarding this electronic communication.
> ===============================================================================
> 
> 
> 
> 
> ===============================================================================
> Please refer to http://www.aricent.com/legal/email_disclaimer.html
> for important disclosures regarding this electronic communication.
> ===============================================================================