DPDK patches and discussions
 help / color / mirror / Atom feed
From: Anatoly Burakov <anatoly.burakov@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 01/13] ip_frag: Moving fragmentation/reassembly headers into a separate library
Date: Wed, 28 May 2014 18:32:35 +0100	[thread overview]
Message-ID: <5d2edc102760954bf177f80255f837341bc207f0.1401298292.git.anatoly.burakov@intel.com> (raw)
In-Reply-To: <cover.1401298292.git.anatoly.burakov@intel.com>
In-Reply-To: <cover.1401298292.git.anatoly.burakov@intel.com>


Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
---
 config/common_bsdapp                               |  5 +++
 config/common_linuxapp                             |  5 +++
 examples/ip_reassembly/main.c                      |  2 +-
 examples/ipv4_frag/main.c                          |  2 +-
 lib/Makefile                                       |  1 +
 lib/librte_ip_frag/Makefile                        | 42 ++++++++++++++++++++++
 .../librte_ip_frag}/ipv4_frag_tbl.h                |  0
 .../librte_ip_frag/rte_ip_frag.h                   |  0
 .../librte_ip_frag/rte_ipv4_rsmbl.h                |  0
 9 files changed, 55 insertions(+), 2 deletions(-)
 create mode 100644 lib/librte_ip_frag/Makefile
 rename {examples/ip_reassembly => lib/librte_ip_frag}/ipv4_frag_tbl.h (100%)
 rename examples/ipv4_frag/rte_ipv4_frag.h => lib/librte_ip_frag/rte_ip_frag.h (100%)
 rename examples/ip_reassembly/ipv4_rsmbl.h => lib/librte_ip_frag/rte_ipv4_rsmbl.h (100%)

diff --git a/config/common_bsdapp b/config/common_bsdapp
index 2cc7b80..d30802e 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -258,6 +258,11 @@ CONFIG_RTE_MAX_LCORE_FREQS=64
 CONFIG_RTE_LIBRTE_NET=y
 
 #
+# Compile librte_net
+#
+CONFIG_RTE_LIBRTE_IP_FRAG=y
+
+#
 # Compile librte_meter
 #
 CONFIG_RTE_LIBRTE_METER=y
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 62619c6..074d961 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -285,6 +285,11 @@ CONFIG_RTE_MAX_LCORE_FREQS=64
 CONFIG_RTE_LIBRTE_NET=y
 
 #
+# Compile librte_net
+#
+CONFIG_RTE_LIBRTE_IP_FRAG=y
+
+#
 # Compile librte_meter
 #
 CONFIG_RTE_LIBRTE_METER=y
diff --git a/examples/ip_reassembly/main.c b/examples/ip_reassembly/main.c
index bafa8d9..42ade5c 100644
--- a/examples/ip_reassembly/main.c
+++ b/examples/ip_reassembly/main.c
@@ -94,7 +94,7 @@
 
 #define MAX_PKT_BURST 32
 
-#include "ipv4_rsmbl.h"
+#include "rte_ipv4_rsmbl.h"
 
 #ifndef IPv6_BYTES
 #define IPv6_BYTES_FMT "%02x%02x:%02x%02x:%02x%02x:%02x%02x:"\
diff --git a/examples/ipv4_frag/main.c b/examples/ipv4_frag/main.c
index 329f2ce..3c2c960 100644
--- a/examples/ipv4_frag/main.c
+++ b/examples/ipv4_frag/main.c
@@ -71,7 +71,7 @@
 #include <rte_lpm.h>
 #include <rte_ip.h>
 
-#include "rte_ipv4_frag.h"
+#include "rte_ip_frag.h"
 #include "main.h"
 
 #define RTE_LOGTYPE_L3FWD RTE_LOGTYPE_USER1
diff --git a/lib/Makefile b/lib/Makefile
index b92b392..99f60d0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -55,6 +55,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
 DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += librte_sched
 DIRS-$(CONFIG_RTE_LIBRTE_ACL) += librte_acl
 DIRS-$(CONFIG_RTE_LIBRTE_KVARGS) += librte_kvargs
+DIRS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += librte_ip_frag
 
 ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y)
 DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni
diff --git a/lib/librte_ip_frag/Makefile b/lib/librte_ip_frag/Makefile
new file mode 100644
index 0000000..3054c1f
--- /dev/null
+++ b/lib/librte_ip_frag/Makefile
@@ -0,0 +1,42 @@
+#   BSD LICENSE
+# 
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+# 
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+# 
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+# 
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# install this header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_IP_FRAG)-include += rte_ip_frag.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_IP_FRAG)-include += ipv4_frag_tbl.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_IP_FRAG)-include += rte_ipv4_rsmbl.h
+
+# this library depends on rte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += lib/librte_mempool lib/librte_ether
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/examples/ip_reassembly/ipv4_frag_tbl.h b/lib/librte_ip_frag/ipv4_frag_tbl.h
similarity index 100%
rename from examples/ip_reassembly/ipv4_frag_tbl.h
rename to lib/librte_ip_frag/ipv4_frag_tbl.h
diff --git a/examples/ipv4_frag/rte_ipv4_frag.h b/lib/librte_ip_frag/rte_ip_frag.h
similarity index 100%
rename from examples/ipv4_frag/rte_ipv4_frag.h
rename to lib/librte_ip_frag/rte_ip_frag.h
diff --git a/examples/ip_reassembly/ipv4_rsmbl.h b/lib/librte_ip_frag/rte_ipv4_rsmbl.h
similarity index 100%
rename from examples/ip_reassembly/ipv4_rsmbl.h
rename to lib/librte_ip_frag/rte_ipv4_rsmbl.h
-- 
1.8.1.4

  parent reply	other threads:[~2014-05-28 17:32 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-28 17:32 [dpdk-dev] [PATCH 00/13] *** SUBJECT HERE *** Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 00/13] IPv4/IPv6 fragmentation/reassembly library Anatoly Burakov
2014-05-28 17:32 ` Anatoly Burakov [this message]
2014-05-28 17:32 ` [dpdk-dev] [PATCH 02/13] Refactored IPv4 fragmentation into a proper library Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 03/13] Fixing issues reported by checkpatch Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 04/13] ip_frag: new internal common header Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 05/13] ip_frag: removed unneeded check and macro Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 06/13] ip_frag: renaming structures in fragmentation table to be more generic Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 07/13] ip_frag: refactored reassembly code and made it a proper library Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 08/13] ip_frag: renamed ipv4 frag function Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 09/13] ip_frag: added IPv6 fragmentation support Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 10/13] examples: renamed ipv4_frag example app to ip_fragmentation Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 11/13] example: overhaul of ip_fragmentation example app Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 12/13] ip_frag: add support for IPv6 reassembly Anatoly Burakov
2014-05-28 17:32 ` [dpdk-dev] [PATCH 13/13] examples: overhaul of ip_reassembly app Anatoly Burakov
2014-05-28 17:34 ` [dpdk-dev] [PATCH 00/13] *** SUBJECT HERE *** Burakov, Anatoly
2014-06-06 15:58 ` [dpdk-dev] [PATCH 00/13] IPv4/IPv6 fragmentation/reassembly library Cao, Waterman
2014-06-16 16:59 ` [dpdk-dev] [PATCH 00/13] IP fragmentation and reassembly Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5d2edc102760954bf177f80255f837341bc207f0.1401298292.git.anatoly.burakov@intel.com \
    --to=anatoly.burakov@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).